lollipop Update for rooted XT1022s.
This is the Lollipop update for rooted XT1022s.Download links below. Please read the notes carefully before you do anything. Credits to the people who uploaded the soak OTA.
---------------------------------------
Read this carefully.
1.This update is only for the XT1022 running stock firmware and not CM11.
2.Make sure that you haven't modified anything inside the internal (system) partitions or removed any packaged apps. If you have done so, undo those changes or customize the package as per the instructions given at the end.
3.also uninstall superuser buy going to permanent unroot also do a hard reset of the phone before proceeding
MAIN Steps (download's)
1.download stock rom from text attachement
2.use attachment file for flashing stock rom and locking bootloder
3 download adb setup
Note :you need to be on android 4.4.4 to use the above rom
Main steps (proceding)
1.extract adb and stock rom you just downloaded to same folder
2. download attachment Retail+lock and paste to the same folder where you just extracted adb and stock rom
3 now just run the Retail+lock.bat
4.wait till you see a notification locked
5.now setup device
now go through this ------------------>
Download link in text attachement the Lollipop OTA update for Moto E (342 MB)
2. Transfer the download firmware and renameit as (Blur_Version.22.21.32.condor_retaildsds.retaildsdsall.en.03.zip) to SD card or internal memory.
3. Update Motorola Update Services app and Motorola Contextual Services app from Play store.
4. Now, go to phone Setting -> About phone -> and tap on System updates
Now proceed as per internal mobile instruction now you must be done
:good::highfive::angel::angel:
If any question do comment in the replay section below
Hello guys! Google released Android P 9.0 Beta 2 (Developer Preview 3) along with all new 157 Emojis. So I'm presenting you the all new Android P emojis for all devices running Nougat or Older Android versions.
REQUIREMENTS:
1. A Rooted Device running Android Kitkat 4.4+ version.
2. Any File Manager with Root access (Solid Explorer, Root Explorer or ES etc.)
Installation instructions
•Manual Method
1. Your device must be rooted (SuperSU or MagiskSU or any other method)
2. Open Explorer>root/system/fonts and backup the original NotoColorEmoji.ttf file
3. Download the emoji file(from Google Drive download link) and replace the older NotoColorEmoji.ttf file with the newer one and set the permission to -rw-r--r-- (0644)
4. Reboot*
5. Profit! You'll have brand new emoji set
•Flashable Zip* (coming soon)
1. Reboot to TWRP
2. Flash the zip.
3. Done!
•Magisk Module (via Magisk Manager) - Download it from the attachments from my Google Drive. Open the Magisk Manager app, go to the Modules section and hit the + button. Choose the downloaded Zip and install it. Once done, reboot your device as suggested by Magisk Manager.
BUGS:
No bugs so far. All the emojis are display correctly.
•If you are using substratum make sure you are on stock font and then flash the zip or follow the method else it won't work! After installing the mod you may install any custom font.
NOTE:
This mod has been tested on my OWN device (Redmi Note 3) running Android 7.1.2 (NOS ROM) and NOS 8.1 ROM.
It works both for AOSP Keyboard and Gboard (systemwide!)
Sub note: Doesn't work for keyboard of apps like WhatsApp,Hike and Telegram as they have their own emojis (iOS ones)
The new emojis will only show up on Gboard as other keyboards/apps need to update their unicode version
INSTALL via Magisk Manager to ensure it works.
DOWNLOADS
1. Manual Method (Font file only)
Google Drive:
https://drive.google.com/file/d/1PCYJUjxI8-85jaXJvLOQrTxUyxFjGBAN/view?usp=drivesdk
2. Magisk Module
Google Drive:
https://drive.google.com/file/d/1knalWMtx90bUMU2Yj98igwrw4eOxVgZi/view?usp=drivesdk
IF YOU DON'T LIKE THEM AND WANT OLD EMOJIS BACK, just Replace the backed up file created by you!
SCREENSHOTS:
In the attachments
If you like my work please hit the Thanks button. That's all I ask for Enjoy!
:good:
I tried this one on my infinix Zero 3 x552 running Android 6
And the emojis then boxes. Please is there any solution
I tried the flashable the same
I tried magisk same problem
The Manuel method too the same result
And help
Thanks for sharing ... Done it with stock miui 10.2.1 using manual method.
I don't own the phone, but I really love that whistle sound!
Hi,
There is an app in Google Play Store called "Firmware Finder". Unfortunately, since May 2018, the app can be used to update firmware only on devices with Google's security patch of April 2018 or earlier. However, you can download FullOTA firmware files and by using a file manager that can read zip archive files, you can find these files.
Here is how to do it:
1) Install Firmware Finder on your device
2) Download STF-L09 8.0.0 379 (C432) or 385 (earlier, when I was looking for a sound file, only 379 was available). You should choose the FullOTA and from here download the update_data_full_public.zip file.
3. Open your file manager app, (I used Solid Explorer) and browse the downloaded zip file. The file you are looking for should be in (data>hw_init>product>media>audio.
bontabela73 said:
Hi,
There is an app in Google Play Store called "Firmware Finder". Unfortunately, since May 2018, the app can be used to update firmware only on devices with Google's security patch of April 2018 or earlier. However, you can download FullOTA firmware files and by using a file manager that can read zip archive files, you can find these files.
Here is how to do it:
1) Install Firmware Finder on your device
2) Download STF-L09 8.0.0 379 (C432) or 385 (earlier, when I was looking for a sound file, only 379 was available). You should choose the FullOTA and from here download the update_data_full_public.zip file.
3. Open your file manager app, (I used Solid Explorer) and browse the downloaded zip file. The file you are looking for should be in (data>hw_init>product>media>audio.
Click to expand...
Click to collapse
Thanks a lot! It's like 1 week that I'm trying to get it!
I AM NOT RESPONSIBLE FOR ANY BRICKS, DO AT YOUR OWN RISK. I TRIED AND WORKED FOR ME.
THIS WILL ERASE ALL DATA FROM YOUR DEVICE.
THIS IS FOR STOCK CHINESE ONLY, I DID NOT TRY IT ON UNLOCKED BOOTLOADER DEVICES, ROOTED DEVICES, OR ANY OTHER SITUATION, SO IDK IF WORKS FOR THAT.
What you gonna need:
android 12 India Rollback:
https%3A%2F%2Fdownload.c.realme.com%2Fflash%2FDP1_Android_13%2FIN%2FRMX3301_ROLL_BACK_Android12_IN.zip&e=118628786
Full OTA CN A13
https%3A%2F%2Fdisk.yandex.ru%2Fd%2FkCmfvWkxHTLqJA&e=118628786
OP Updater apk
https://forum.xda-developers.com/attachments/oplocalupdate_for_android13-apk-2-zip.5722227/
YES! YOU GONNA NEED BOTH Packages CN A13 and India Roolback
Steps:
- Update your Chinese device to A.13 c.08 normally using the official updater.
- Once you are on A13_C.08 official update turn off All internet of the device.
- Transfer all the files downloaded to Documents folder of your device.
- Go to Settings - Applications - Application Management, press 3 dots, select to show system applications! In the search, enter - Software Update, find it and clear the cache and data in it! Next, in the search, enter - Update Service, find it, and also clear the cache and data in it!
- Install the OP Updater apk
- Place the Full OTA CN A13 zip on the root folder of your device.
- Open the OP updater, press the gear on top. You will see the CN Package listed, tap on it but DO NOT INSTALL (do not touch anything on the popup that will show up)
- Put the OP updater app on Floating Window so it does not close it
- Go to the file manager copy the name of the OTA CN A13 from the root of the device and rename the android 12 India Rollback with the name of the OTA CN A13 you copied
- Delete the OTA CN A13 from the root of the device (or move to another folder) and move the Android 12 India Roolback (that you already renamed) to root folder
- Go back to the floating window OP Updater and press install now
- After process is done you will see a Reboot button, press it and let it do the job.
Done! You should now boot into global ROM India Region.
Thanks to Stano36 for Showing me this on 4PDA Forum and the guy that shared it.
Realme GT2 Pro - Прошивки - 4PDA
Realme GT2 Pro - Прошивки
4pda.to
ENJOY YOUR GLOBAL ROM DEVICE
Thanks
Will this also work for changing region from mea to eu?Will this also work for changing region from mea to eu?
No, it won't work for you.
I was able to switch from android 12 CN (A18) to Rollback 12 IN (A14) the first time, then you can switch from Rollback IN to another region.
If you switched from Rollback IN to EU, for example, then from EU to another region is not possible, after flashing will be a brick.
If you need another region, then you go back to Rollback 12 IN, and then to whatever you want. Rollback is the starting point!
P. S. I don't know about the Chinese region, mostly everyone switched from Rollback 12 IN to EU or RU.
Damien969 said:
I was able to switch from android 12 CN (A18) to Rollback 12 IN (A14) the first time, then you can switch from Rollback IN to another region.
If you switched from Rollback IN to EU, for example, then from EU to another region is not possible, after flashing will be a brick.
If you need another region, then you go back to Rollback 12 IN, and then to whatever you want. Rollback is the starting point!
P. S. I don't know about the Chinese region, mostly everyone switched from Rollback 12 IN to EU or RU.
Click to expand...
Click to collapse
Can you explain once in rollback A12 IN how to switch to EU A12 and which files are needed?
AaronZaDev said:
Can you explain once in rollback A12 IN how to switch to EU A12 and which files are needed?
Click to expand...
Click to collapse
After switching to Rollback IN you need:
Do a data reset, download Full OTA of the desired region (Global/EU/RU) and move it to the root of memory (should not lie in the folder!), then turn off the Internet (or better not turn it on at all) - clearing the cache and data of the two system applications: "Software Update" and "Update Service", do not forget to enable "show system processes".
Next run third party updater - "OPLocalUpdate_For_Android12.apk" (or "For_Android 13" if you have android 13), but this time you need "NOT TO CHANGE!", press 3 points, select the file .zip (aka Full OTA), wait for installation ... ...then reboot.
For peace of mind, do another data reset (via recovery).
If all went well, congratulations you changed the region!
P. S. I went this way from Rollback IN --> EU-NONEEA-Double (XNE00DB) Android 13.
i can't download from yandex, where can i download Full OTA CN A13 ?
cnkt_br said:
i can't download from yandex, where can i download Full OTA CN A13 ?
Click to expand...
Click to collapse
If you want, I have China A.16: https://rms01.realme.net/SW/software/RMX3300domestic_11_A.16_2022012714110118.zip
It's the only Chinese ROM URL I have.
Damien969 said:
...stiahnite si Full OTA požadovaného regiónu (Global/EU/RU) a presuňte ho do koreňového adresára a pamäte...
Click to expand...
Click to collapse
You forgot to mention that the OTA file must be modified.
In the file
payload_properties.txt
Adjust the value from 0 to 1
oplus_update_engine_verify_disable=0
Stano36 said:
You forgot to mention that the OTA file must be modified.
In the file
payload_properties.txt
Adjust the value from 0 to 1
oplus_update_engine_verify_disable=0
Click to expand...
Click to collapse
I didn't modify anything, thanks to Rapper_skull for the link to the Full OTA. Just downloaded and installed this .zip file following the instructions, no problems.
cnkt_br said:
i can't download from yandex, where can i download Full OTA CN A13 ?
Click to expand...
Click to collapse
I'll download it and upload it to another file-sharing site.
Damien969 said:
Nič som neupravoval
Click to expand...
Click to collapse
Bcecause they were already modified in the 4pda manual.
Here is the link to the Full OTA CN Android 13 C.08:
Full OTA CN A13 C.08
Can someone help me please ? How can I throw CN in the root folder I can't find it
I'm in C11 and when I try to install rollback package, it says "downgrade is not allowed".
Can u tell me how to install EU C11?
SMinato27 said:
I'm in C11 and when I try to install rollback package, it says "downgrade is not allowed".
Can u tell me how to install EU C11?
Click to expand...
Click to collapse
EU C.11 no one has rolled back from it yet, I don't know how to help you.
Meroem said:
Can someone help me please ? How can I throw CN in the root folder I can't find it
Click to expand...
Click to collapse
You need a root partition, NOT A FOLDER!
The root partition has other folders like, "Alarms, Android, DCIM, Download, etc." You need to move the .zip file to the root section, it should be next to the folders, NOT IN THE FOLDER!
Damien969 said:
You need a root partition, NOT A FOLDER!
The root partition has other folders like, "Alarms, Android, DCIM, Download, etc." You need to move the .zip file to the root section, it should be next to the folders, NOT IN THE FOLDER!
Click to expand...
Click to collapse
Thanks for your help
Mission succeeded
Damien969 said:
Here is the link to the Full OTA CN Android 13 C.08:
Full OTA CN A13 C.08
Click to expand...
Click to collapse
Can you upload into another server like, mediafire or google drive?