Related
I have the Evo LTE S-on (HTC bootloader unlocked) and TWRP installed. The only problem I'm having is that I cannot seem to get .zip files to open from the install menu in TWRP (recovery). I factory reset and try to open the zip from the install menu but it just says "Failed". Specifically I am trying Kushdeck's new CM10 ROM. Any help would be greatly appreciated. Thanks.
PS. Not sure if this will help but on the install menu my files show up twice, the first time with the normal naming and the second with "/." in front of them.
Did u try and re download it again? Sounds like a bad DL if it keeps failing after a couple of attempts
Sent from my EVO using Tapatalk 2
Ok I'm trying that now. I'm also wondering if there's a problems with my /ext-sd because everytime I factory reset it says it couldn't access that. Do you think that has anything to do with it? Is reinstalling TWRP an option?
Ok thanks so much the re-download did it. But now I'm at a black/blank screen after start up. I factory reset, installed the CM10 ROM then Gapps and wiped the dalvik/cache. Then when I reboot it just goes to the HTC screen and after that nothing. Ideas?
This is going to sound strange but try factory restet, wipe cache/dalvik and then just reboot without trying to flash anything.. I've been having some similar issues as mine isn't recoglizing any MD5 when i try to flash a new rom.. I wiped my phone and have tried to flash a few roms and it fails every time and in wiping my phone it somehow took out my backup so without any other options (that I knew of) I just rebooted and luckily it loaded a completely bare vipor rom like what I started out with when I originally rooted.. BTW, did you create a backup before trying to flash? Should always make a backup....
Ya I had backed up. Turns out I needed to manually flash the boot.img which fixed the issue
elitelimfish said:
Ya I had backed up. Turns out I needed to manually flash the boot.img which fixed the issue
Click to expand...
Click to collapse
Thanks for this. I had the same problem, (S-ON, TWRP. black screen on boot). I was able to flash stock-based ROMs, but not CM10, so I suspected it had something to do with the things that HTCDev won't allow the recovery access to, but the logs from TWRP didn't throw any errors, so while I suspected boot, I didn't know what to do about it. And everyone knows that it's easy to be caviler with everything is working, but as soon as you start having problems, you get gun shy about trying things.
Your post was the solution for me. Extract the boot.img file found inside the zip or your chosen ROM, and flash it using fastboot:
"fastboot flash boot boot.img"
heywetried said:
Thanks for this. I had the same problem, (S-ON, TWRP. black screen on boot). I was able to flash stock-based ROMs, but not CM10, so I suspected it had something to do with the things that HTCDev won't allow the recovery access to, but the logs from TWRP didn't throw any errors, so while I suspected boot, I didn't know what to do about it. And everyone knows that it's easy to be caviler with everything is working, but as soon as you start having problems, you get gun shy about trying things.
Your post was the solution for me. Extract the boot.img file found inside the zip or your chosen ROM, and flash it using fastboot:
"fastboot flash boot boot.img"
Click to expand...
Click to collapse
Hey out of curiosity did you like any of the stock based ROMs? If so which ones? I kinda wanna try one out but haven't settle on one
After I attempted to install the CM 11 preview that just came out it seems as though I get stuck in a boot loop. I am able to get into the bootloader but not the recovery. The reason I think I am stuck in the boot loop is because I did not know you had to flash the boot.img that was inside the .zip file, and went ahead and flashed the .zip in my current recovery. I am just wondering if I could still fastboot flash the boot.img file without causing even more problems.
Yes, in the forum the ROM was posted (http://forum.xda-developers.com/xperia-z2-tablet/orig-development/z2-tabletdevelopment-cm11-android-4-4-t2809793) but I guess I didn't see that he said it was in the zip :silly:.
Nonetheless, I just don't want to hard brick the device so that is why I am asking. Thanks in advance for anyone that can help!
cmd-line34 said:
After I attempted to install the CM 11 preview that just came out it seems as though I get stuck in a boot loop. I am able to get into the bootloader but not the recovery. The reason I think I am stuck in the boot loop is because I did not know you had to flash the boot.img that was inside the .zip file, and went ahead and flashed the .zip in my current recovery. I am just wondering if I could still fastboot flash the boot.img file without causing even more problems.
Yes, in the forum the ROM was posted (http://forum.xda-developers.com/xperia-z2-tablet/orig-development/z2-tabletdevelopment-cm11-android-4-4-t2809793) but I guess I didn't see that he said it was in the zip :silly:.
Nonetheless, I just don't want to hard brick the device so that is why I am asking. Thanks in advance for anyone that can help!
Click to expand...
Click to collapse
Just to clarify first, do you have a 4G tablet or wifi version? And which one did you flash (castor or castor_windy)
kbroh said:
Just to clarify first, do you have a 4G tablet or wifi version? And which one did you flash (castor or castor_windy)
Click to expand...
Click to collapse
Opps, meant to mention that. I have the castor_windy version (Wi-Fi) model and flashed the castor_windy zip. I also meant to mention that I have an unlocked bootloader with the CWM based recovery (found here: http://forum.xda-developers.com/showthread.php?t=2708194). I don't think this is as important but I do have the 16GB storage. I earlier said I could not get into that recovery that I have installed, but the violet light still goes on when I boot, but nothing else.
cmd-line34 said:
Opps, meant to mention that. I have the castor_windy version (Wi-Fi) model and flashed the castor_windy zip. I also meant to mention that I have an unlocked bootloader with the CWM based recovery (found here: http://forum.xda-developers.com/showthread.php?t=2708194). I don't think this is as important but I do have the 16GB storage. I earlier said I could not get into that recovery that I have installed, but the violet light still goes on when I boot, but nothing else.
Click to expand...
Click to collapse
Ok no problem, Have you tried flashing CWM through fastboot, then reinstalling ROM through CWM?
If that can't be done, Can you flash this castor_windy version https://mega.co.nz/#!mJ5VTATR!Rb9pX0a4drAkVX53Mjf6_vZr8FqX0UzXcf1nSTzj_Fk
through fastboot, then immediately flash CWM to secure a recovery.
The link is the castor_windy ROM without having to flash a boot.img separately. Thats your safest solution instead of flashing boot.img
Thank you, just re-flashing the recovery from the thread I linked seemed to do the trick. Maybe I will try and flash Cyanogenmod later now that I got the stock ROM working again. At least I was smart enough to make a nandroid backup in CWM before hand though!
Again, thanks alot!
cmd-line34 said:
Thank you, just re-flashing the recovery from the thread I linked seemed to do the trick. Maybe I will try and flash Cyanogenmod later now that I got the stock ROM working again. At least I was smart enough to make a nandroid backup in CWM before hand though!
Again, thanks alot!
Click to expand...
Click to collapse
Good to hear!
Sent from my Xperia Z2 Tablet Wifi using XDA Premium 4 mobile app
Hi all,
bad day for me... It seems that I bricked my Z2 Tablet tonight.
At the beginning, I just wanted to install CM11.
My Z2 is a SGP512 Wifi only. So, regarding the page http://www.xperiablog.net/2014/07/12/cyanogenmod-11-nightly-builds-start-for-xperia-z2-tablet/ , it says : "There are currently nightly builds for the Wi-Fi variants (SGP511, SGP512) of the Xperia Z2 Tablet under codename “Castor Windy”" .
So I downloaded Castor Windy and put it in the tablet.
After that, I did had to install a recovery. I succeeded to install XZDualRecovery (http://forum.xda-developers.com/showthread.php?t=2794175). Once installled, I went into TWRP Recovery , started to wipe all. And next step, I began to install zip Castor Windy. At this time, TWRP tells me that Castor Windy is not for my tablet model. And I have to use Castor. Problem. I wiped all. So, I have to mount the Tablet systems and drives to put the new Castor zip downloaded. But I'm unable to mount. Nothing is mounted. I tried to use adb to connect while I was in TWRP but nothing worked. I wanted to use adb to send on one of partitions the new downloaded rom. I was unable to do that.
Finally, I shut down my tablet. I took the SD Card to put it into my PC and to put on it the downloaded Rom. And when I wanted to restart the Tablet, only the Sony Logo appears and I'm not anymore able to enter in recovery mode. ADB and Fastboot fail to detect my tablet.
I'm totally lost, and I fear that all is lost.
Please, help me, I just would like to enter recovery and flash Castor Rom.... :crying:
Thanks a lot by advance.
Tom.
See this thread: http://forum.xda-developers.com/xpe...ed-tablet-tried-to-install-cm-failed-t2838765
Good luck :good:
It seems a bit trendy to mess with the recovery, resulting in a brick or bootloop.
Just making a new thread cause my case is a bit different.
I was on Existenz 4.7.0 when I decided to flash 5.0.
Wasn't a clean install, resulted in some app fc'ing and restarting, so i went back to trwp and used my backup, keeping in mind to come back and make a clean install when I can take the time it needs.
Made a few backups today and wanted to start the trwp backup when I realised that I wasn't able to enter recovery.
Installed the trwp app, which wasn't able to reflash the recovery.
So I read another posting and I decided to delete the chargemon and rename the chargemon.stock, but that wasn't that smart, I decided later.
So back home I downloaded the dual recovery software from NUT's website to totally reinstall the recovery. After some ADB trouble I managed to get everything running, the batch file installed the recovery, everything looked pretty, at the end of the process the Z2 rebootet and e voila, I'm stuck in bootloop, clueless.
When I power the phone you can feel the first small vibration, then the Sony logo appears, stays, and it reboots.
Reset Button, powering on and holding Volume up isn't doing anything, so is Volume down.
What can I Do?
I know I made a few mistakes, but help is still needed!
Bro, Please read carefully before installing recoveries.
Nut's Recovery is NOT for Marshmallow. and it will cause bootloop and same problem you encounter here.
Only Solution is to flash via flashtool and re-root.(personally i would flash a kitkat .ftf then root it with any of the available methods. you can try kingroot it is the easiest) after that install Nut's recovery and flash your MM rom which will come with its own working recovery.
Oh, ok, so thats the cause. Didn't know that, shame on me.
So Existenz 5 messed up my recovery and maybe the silly try of reflashing killed it totally or just the bootloader.
So I will try to setup a Win7 PC and setup flash tool properly (didn't seem to work on win10)
Thanks for that finger point I the right direction
Flashtool works on windows 10 no problem for me.
Just install the right drivers and install 0.9.18.6 version of flashtool and try different drivers it shall work
Will do, thanks a lot. Seems to me that I had a 4.7 Existenz Rom with bootloader/recovery from MM, which I destroyed.
Is it possible to reflash the old bootloader? Or will flash tool spare my datas on internal SD card?
why to flash a boot loader?? is your device unlocked bootloader??
It's locked.
So it can't be a broken bootloader?
So it's just because the recovery is messed up?
JackDCalloway said:
It's locked.
So it can't be a broken bootloader?
So it's just because the recovery is messed up?
Click to expand...
Click to collapse
yes bro don't worry.
It seems that you are new to sony or you re coming from samsung or any other device with recovery partition.
By default, Sony doesn't have a recovery partition like in samsung. that is why developers made the recovery a part of the system (your ROM) the chargemon files are the one responsible for the recovery. so when you install a recovery it is like you are installing a system application which can be messed up if it is not compatible with your rom version.
PS:Be carefull never wipe the system partition from recovery and restart your phone before installing a new rom because if you restart without having installed your rom your phone won't have a recovery(part of the rom) neither a system----> Bootloop and need to reflash.
you can unlock your bootloader and make a recovery partition and install aosp roms. but on sony once you unlock your bootloader you will loose a lots of features and camera enhancements. so better keep it Locked and use stock based roms like existenz and MIUI roms which are stock based.
I hope i have been able to clarify all
OK, makes sense.
Seems like I'm still pretty new to Sony. Came from Samsung last December, just got enough knowledge to flash and improvise, quick and dirty.
So if I could get hands on my old chargemon file, (from when I didn't tried to install Existenz 5) I may get the Z2 running again?
Of course a pretty clean install afterwards.
Just asking, cause of backup reasons
Edit: I knew that unlocking the BL has a few disadvantages. I'm happy with Existenz but now I know a few things more, thanks michel090428
it is very difficult now even if you have the chargemon file. i don't know what could be messed up with the system. go for a clean flash it is the most safe way to do it.
Read this guide if you want a help with flashing it is very easy and detailed. and remember it is better to flash kitkat .ftf as it is easily rootable.
http://www.gizmobolt.com/2015/04/09...z3-23-1-a-0-690-ftf-using-flashtool-manually/
Hey folks, I'm back again!
Managed to setup a Win7 PC, installed the correct drivers, setup Flashtool, found correct ftf file and so on.
Problem is that I'm only able to get into fastboot mode with my Z2, for me it seems like Flashtool won't work when the device is only in fastboot mode.
What can I do?
why you can't start your device with flashmode?
You need to shutdown the device then when flashtool ask you to start in flash mode you press volume down(keep pressed then you plug in USB cable and it should start in flash mode directly.
have you tried to follow the guide i posted in the first page? where are you stuck? which step?
michel090428 said:
why you can't start your device with flashmode?
You need to shutdown the device then when flashtool ask you to start in flash mode you press volume down(keep pressed then you plug in USB cable and it should start in flash mode directly.
have you tried to follow the guide i posted in the first page? where are you stuck? which step?
Click to expand...
Click to collapse
Was a bit tricky, did the 'vol down + plug in' thing several times and it worked suddenly, flashtool flashed the ftf. Now it's FCing several tasks while it would do the android setup. Trying to flash a 4.4.2 ROM now, thanks for patience and help, appreciated this!
WIPE DATA
JackDCalloway said:
Was a bit tricky, did the 'vol down + plug in' thing several times and it worked suddenly, flashtool flashed the ftf. Now it's FCing several tasks while it would do the android setup. Trying to flash a 4.4.2 ROM now, thanks for patience and help, appreciated this!
Click to expand...
Click to collapse
You re Welcome Bro,
Concerning the FC You need to check the WIPE DATA option in flashtool i think it will solve the FC's
I'm with 23.1.A.1.28 now and it's fine. Just need to get root, there should be an exploit but it's not working for me, reasons unknown. Going to have a look at it later. Want to flash Existenz, that's the goal.
Bro , Use KINGROOT it is able to root .28 firmware.
there is a thread here for kingroot.
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM (Eastern Time): I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
RyokoOnXDA said:
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM: I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
Click to expand...
Click to collapse
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I managed to get into recovery. I don't know how to flash Android 7.0 for my Aristo, though.. so I'm researching it.
EDIT: Got a ROM flashed. Everything working now.
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
Sent from my LGE LM-X220 using XDA Labs
So I recently tried to unroot my device with flashing official ROM on it. Apparently I used the wrong file because my phone got bricked. I tried using XiaoMiTool by Francesco but it didn't help. I spent a lot of time trying to fix it so ill post what worked for me. I downloaded a lot of ROMS but none of them worked for me there was either flash error or device mismatching and I couldn't find right flash official software anywhere. I downloaded another ADB fixing program which worked, I downloaded Szaki/XiaomiADB fastboot tools which worked perfectly. I simply connected my phone searched for my phone code name (tucana) downloaded ROM from there, wiped all data off and finally flashed OS on my device. I also have a question, are there any android software fixing programs for phone repair companies or something similar?
Have good day and stay healthy,
MX8MC8
id suggest to unbrick with mi flash tool.
I did that always when i was stuck on something, it ofcourse removes your data but saves the device so its still the profit probably... After succesfull rom installation you can flash again.
Also you do this in fastboot mode
When I was stuck in the same way the solution I found was to flash whatever rom then when the phone bootloops, go into recovery, and format data. Afterwards it will boot to startup screen and take forever to load up. Anyway that is my solution, before that I would have to flash stock recovery to boot for the first time then flash a custom recovery back.