[ROM][UNOFFICIAL] LineageOS-16.0 [zl1] (Personal builds) - LeEco Le Pro3 ROMs, Kernels, Recoveries, & Other D

HTML:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
An unofficial builds of LineageOS 16.0 with (proably) mounthly updates.
But, with some changes to device/kernel trees such as:
Kernel:
Clean LA.UM.7.6.r1-07800-89xx.0 kernel without upstream junk.
qcacld-2.0 from LA.UM.7.6.r1-07800-89xx.0.
VDSO32 and crypto patches to improve performance a bit.
Device:
Backported IR hal from 17.1.
Other bug fixes.
Flashing Instruction:
1. Backup all your data (Important)
2. Wipe system, data and cache.
3. Flash the ROM and Gapps.
4. Reboot.
Downloads:
ROM: lineage-16.0-UNOFFICIAL-zl1-signed.zip
Gapps: https://opengapps.org
Sources:
Device: https://github.com/voron00/android_device_leeco_zl1
Kernel: https://github.com/voron00/android_kernel_leeco_msm8996
Credits:
- LineageOS team.

fits for zl0?

michelkovacic said:
fits for zl0?
Click to expand...
Click to collapse
It should work i guess but no guarantees.

voron00 said:
#include "std_disclaimer.h"/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
An unofficial builds of LineageOS 16.0 with (proably) mounthly updates.
But, with some changes to device/kernel trees such as:
Kernel:
Clean LA.UM.7.6.r1-07800-89xx.0 kernel without upstream junk.
qcacld-2.0 from LA.UM.7.6.r1-07800-89xx.0.
VDSO32 and crypto patches to improve performance a bit.
Device:
Audio platform from JUI 7.1.1.
Forceencrypt on.
Minor bug fixes from 17.1 branch.
Flashing Instruction:
1. Backup all your data (Important)
2. Wipe system, data and cache.
3. Flash the ROM and Gapps.
4. Reboot.
Downloads:
ROM: lineage-16.0-20200825-UNOFFICIAL-zl1-signed.zip
Gapps: https://opengapps.org
Sources:
Device: https://github.com/voron00/android_device_leeco_zl1
Kernel: https://github.com/voron00/android_kernel_leeco_msm8996
Credits:
- LineageOS team.
Click to expand...
Click to collapse
"Audio platform from JUI 7.1.1" Does it mean that the audio output will be the same as eui / jui in both speakers and heaphones??

Mnlight7 said:
"Audio platform from JUI 7.1.1" Does it mean that the audio output will be the same as eui / jui in both speakers and heaphones??
Click to expand...
Click to collapse
No, its more of a pathing changes to improve compatibility with later kernel drivers. Doesnt really affect any audio quality though.

tested on my x720 (with aicp14) with fatal results. Data partition auto encrypted without any prompt and without pasword. when phone asked me about the password i said... ouh yeah. Needed wipe data partition and gl/hf

I'm trying this rom. Clean flash without Gapps.
At first boot the rom was auto-encrypted and the phone booted as a Lex 727 (I have a Lex 720 6/64). I have not lost any data on the sd partition, that's nice!
Then I installed Nano Gapps, reboot, all seems OK and the phone now is seen as a Lex 720, that's right! I have not found where is the security patch information, for now this is the big question mark about this rom Thanks for this fine work!
Edit:
I think the forced encryption isn't a good idea, then uninstalled the rom. Further, with this rom the battery is overheating when charging, that's not nice! Thanks anyway!

Hello Dev,
How can one remove the encryption on the ROM. it worked on LEX722 but the forced encryption is the problem and formatting data in twrp does not help either.
Thanks

The ROM is very fluid, it works greatly on LEX722. I only wish there is a way we can decrypt data in TWRP, otherwise, it's perfect. I will keep this and hopeful @voron00 will give a guide on the solution for decryption in twrp.
Thanks
---------- Post added at 09:03 AM ---------- Previous post was at 08:55 AM ----------
championriki said:
tested on my x720 (with aicp14) with fatal results. Data partition auto encrypted without any prompt and without password. when phone asked me about the password i said... ouh yeah. Needed wipe data partition and gl/hf
Click to expand...
Click to collapse
You can access the phone with your set password/pin/pattern. I read on the 4PDA thread that you must have your fingerprint set three times which i did and it worked.
The only issue now is having access to data partition when in recovery but it is not the problem of the ROM but TWRP. The good news is that it doesn't stop from flashing any file in recovery.
I hope this helps someone.

lineage-16.0-20201029-UNOFFICIAL-zl1-signed.zip
October security patches.
Removed forceencrypt.
Reverted thermal conf changes to original 16.0.

voron00 said:
lineage-16.0-20201029-UNOFFICIAL-zl1-signed.zip
October security patches.
Removed forceencrypt.
Reverted thermal conf changes to original 16.0.
Click to expand...
Click to collapse
Man this is great work thanks...all working well! Hope you'll keep this updated for long :good:

voron00 said:
It should work i guess but no guarantees.
Click to expand...
Click to collapse
First build doesn't work on zl0, maybe work with last update?

lineage-16.0-20201109-UNOFFICIAL-zl1-signed.zip
November security patches.

voron00 said:
lineage-16.0-20201109-UNOFFICIAL-zl1-signed.zip
November security patches.
Click to expand...
Click to collapse
just flashed few hours ago...all is great! battery is so much better than on android 10...keep up the good work with the monthly patches
By the way. for future builds I can just dirty flash? I always do clean flash usually...thx

Great ROM! running on zl0 too :good:

gran roms funciona de maravilla gracias great roms works great thanks

voron00 said:
lineage-16.0-20201109-UNOFFICIAL-zl1-signed.zip
November security patches.
Click to expand...
Click to collapse
I use this rom since a few days. With Android 10 roms i had problems with connections to mobile networks using dual sim. With this rom problems seems to be gone.The battery drain is better than with Android 10 roms. Thank you for this good work.

lineage-16.0-20201216-UNOFFICIAL-zl1-signed.zip
December security patches.

[QUOTE = "voron00, publicación: 84116665, miembro: 3772648"]
lineage-16.0-20201216-UNOFFICIAL-zl1-signed.zip
Parches de seguridad de diciembre.
[/CITAR]. Gracias

Just installed it, battery seems good, quite smooth and insanely good deepsleep. One "issue" tho, i had the phone encrypted on android 10 and with this rom everytime i reboot it asks for password before finishing booting, its like a bit weird

Related

[ROM][F400K/S/L][UNOFFICIAL] Cyanogenmod 13 TEST BUILD [15/11/27]

WARNING: This is TEST/EXPERIMENTAL CM13 build.
I won't answer any questions or requests.​
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
I introduce you Cyanogenmod 13 for F400S/K/L (Korean G3 variants)
Changelog
- 15/11/27
Camera fixed
Update vendor blobs from F400K20n
Many other bug fixes and CM updates
- 15/11/06
Initial Build
Working
- Almost everything
Not Working
- External SD (You have to format SD card if you want to use it)
- You tell me
Attention:
- F400L data connection tested, but not fully tested.
Requirements
- Working TWRP (Download from Here or v2.8.7.0)
Installation
- Reboot into recovery.
- Backup your current rom.
- Wipe System/Data/Cache partition.
- Flash Rom.
- (Optional) Flash lollipop baseband for your device.
- (Optional) Flash GApps and SuperSU.
- Reboot and Enjoy!
Download
ROM
Baseband for F400K (v20l)
GApps
OpenGApps
Previous Version
15/11/06
Sources
Device Tree: F400/G3-Common
Kernel
If you liked this post, how about making a little donation for me?​
Thank for your support for F400 variants.
Oh good news for F400 users. :good::good::good:
Can you post a link to your kernel source? The kernel I built for D850 won't boot so I'm doing a diff on some sources to see if I can find something. Of course finding things to compare to is slim right now .
navenedrob said:
Can you post a link to your kernel source? The kernel I built for D850 won't boot so I'm doing a diff on some sources to see if I can find something. Of course finding things to compare to is slim right now .
Click to expand...
Click to collapse
I used CM kernel source (branch cm-13.0) without making any changes. Only SELinux policies made build go wrong, so try to build full CM13 not building only kernel.
fprhqkrtk303 said:
I used CM kernel source (branch cm-13.0) without making any changes. Only SELinux policies made build go wrong, so try to build full CM13 not building only kernel.
Click to expand...
Click to collapse
Just make your selinux permissive it will ignore sepolicies then. And look at the open commits on Gerrit. There are some fixes that makes compiling go through
Wysłane z mojego LG-D855 przy użyciu Tapatalka
Yeah, I don't think it is the problem is with the kernel. I did implement this WIP from Gerrit http://review.cyanogenmod.org/#/c/117851/. I get no build errors at all but obviously something is preventing the kernel from booting into the OS. I also applied androidboot.selinux=permissive and it doesn't work either. I'll keep trying .
Well the build did boot but any change under settings give a force close.
Sent from my LG-F400S using Tapatalk
D855 support?

[UNOFFICIAL] CyanogenMod 12.1 for the OnePlus 2

This is a build of CyanogenMod 12.1 for the Oneplus 2.
The build is done solely out of official Cyanogenmod sources and is meant as an intermediate solution as long as there are no official nightlies. Local Bugfixes are listed later in the OP.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ROM:
AFH
Google Drive
(MD5: 763d98e1931bd55fde89e57098493bf7 )
GApps:
OpenGApps (careful, use this release, newer ones are currently broken)
Changes to official sources:
- Workaround for camera as discovered by @Grarak
- Improved call quality as discovered by @depii
Bugs:
- DT2W does not work (yet)
Missing features:
- No FP sensor
- No Laser AF
- Notification slider does not work
- No option to disable hardware buttons
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 12.1, ROM for the OnePlus 2
Contributors
elandroido
Source Code: https://github.com/elgithubo/local_manifests/blob/master/oneplus2.xml
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2015-12-07
Last Updated 2015-12-08
*reserved*
1st one.. Waiting..
Bugs?
Mehul.S said:
1st one.. Waiting..
Click to expand...
Click to collapse
Can you please try if download link from OP works?
seangeezy12 said:
Bugs?
Click to expand...
Click to collapse
Bugs:
- No DT2W
Missing features:
- No fingerprint sensor
- No Laser AF
Download worked perfectly, setting up the phone now... Will report back... (Doing a clean install)
jellis24 said:
Download worked perfectly, setting up the phone now... Will report back... (Doing a clean install)
Click to expand...
Click to collapse
Looking forward to your feedback!
elandroido said:
Looking forward to your feedback!
Click to expand...
Click to collapse
Seems to be missing the option to turn on the on screen buttons and disable the hardware buttons.
jellis24 said:
Seems to be missing the option to turn on the on screen buttons and disable the hardware buttons.
Click to expand...
Click to collapse
I darkly recall that Cyanogen has removed those options from upstream... May have been a rumor too...
I will have a look into details...
But not today anymore, I have to commit my fixes to Gerrit first in order to not loose the overview...
elandroido said:
I darkly recall that Cyanogen has removed those options from upstream... May have been a rumor too...
I will have a look into details...
But not today anymore, I have to commit my fixes to Gerrit first in order to not loose the overview...
Click to expand...
Click to collapse
I also notice that SELinux status = Enforcing on this build, that's the first time I've seen that on any custom rom for the OnePlus 2. Things are looking really good.
))))). I've been waiting for this for some time downloading
---------- Post added at 20:02 ---------- Previous post was at 20:01 ----------
jellis24 said:
I also notice that SELinux status = Enforcing on this build, that's the first time I've seen that on any custom rom for the OnePlus 2. Things are looking really good.
Click to expand...
Click to collapse
There are more. For example AICP...
jellis24 said:
I also notice that SELinux status = Enforcing on this build, that's the first time I've seen that on any custom rom for the OnePlus 2. Things are looking really good.
Click to expand...
Click to collapse
Kudos for strict selinux go to @ciwrl he fixed it obvioulsy...
I hope my build will be legacy soon and we will get official nightlies...
Great that you like it!
Another missing feature, the notification slider does not function.
jellis24 said:
Another missing feature, the notification slider does not function.
Click to expand...
Click to collapse
Thanks for testing and the feedback... I have updated OP with your finding...
I am sure, fixes will come... ^^
CM13 Source is out, as I can see correctly, or am I wrong?
https://github.com/CyanogenMod
Prevelation said:
CM13 Source is out, as I can see correctly, or am I wrong?
https://github.com/CyanogenMod
Click to expand...
Click to collapse
CM13 source is out, but it currently does not boot on the Oneplus 2...
I have invested a lot of time in CM13 for the Oneplus 2, but could not even get a kernel error message so far... I can build it with some fixes, but it instantly crashes on boot...
That's why I stick to CM12 for the time being...
elandroido said:
CM13 source is out, but it currently does not boot on the Oneplus 2...
I have invested a lot of time in CM13 for the Oneplus 2, but could not even get a kernel error message so far... I can build it with some fixes, but it instantly crashes on boot...
That's why I stick to CM12 for the time being...
Click to expand...
Click to collapse
Have you talked to @regalstreak?
If I recall correctly, he has already built a kernel for it. I'm not sure if its helpful to you, as I know nothing about building a rom lol
Yes. Follow this development thread : http://forum.xda-developers.com/oneplus-2/general/cyanogenmod-13-android-marshmallow-t3256275 @elandroido what are you building? on which source? ill help you out so you can help us build too @OmegaBlaze thanks for mentioning so i could see
---------- Post added at 03:33 PM ---------- Previous post was at 03:27 PM ----------
elandroido said:
This is a build of CyanogenMod 12.1 for the Oneplus 2.
The build is done solely out of official Cyanogenmod sources and is meant as an intermediate solution as long as there are no official nightlies. Local Bugfixes are listed later in the OP.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ROM:
AFH
Google Drive
(MD5: 763d98e1931bd55fde89e57098493bf7 )
GApps:
OpenGApps (careful, use this release, newer ones are currently broken)
Changes to official sources:
- Workaround for camera as discovered by @Grarak
- Improved call quality as discovered by @depii
Bugs:
- DT2W does not work (yet)
Missing features:
- No FP sensor
- No Laser AF
- Notification slider does not work
- No option to disable hardware buttons
XDA:DevDB Information
[UNOFFICIAL] CyanogenMod 12.1, ROM for the OnePlus 2
Contributors
elandroido
Source Code: https://github.com/elgithubo/local_manifests/blob/master/oneplus2.xml
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2015-12-07
Last Updated 2015-12-08
Click to expand...
Click to collapse
make a new thread?
regalstreak said:
Yes. Follow this development thread : http://forum.xda-developers.com/oneplus-2/general/cyanogenmod-13-android-marshmallow-t3256275 @elandroido what are you building? on which source? ill help you out so you can help us build too @OmegaBlaze thanks for mentioning so i could see
---------- Post added at 03:33 PM ---------- Previous post was at 03:27 PM ----------
[/hide]
make a new thread?
Click to expand...
Click to collapse
Hi @regalstreak
My 12.1 local_manifest is linked in the OP. I just applied some patches to workaround camera issue and adjust mixer_paths.
I'll post my CM13 local manifest tonight to your thread, cause I do not have it here at work.
I have already managed to build CM13 rom and recovery. Recovery works fine, but ROM does not boot (and even does not produce last_kmsg despite having enabled it).
So see you later in your thread.

[EOL][ROM][7.1.2_r17] LineageOS OMS [substratum][harpia]

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), re-branded CyanogenMod, which is designed to increase performance and reliability over stock Android for your device. However, the ROM here will have full Substratum Support, in addition to stock LineageOS features.
Code:
#include <disclaimer.h>
using xdarules std;
/*
* Your warranty was void as soon as you unlocked your phone.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES:
Installation
WARNING: These are blind builds. I do not own the device but yes the ROM will be tested by a few people. Bugs are (were) similar to that on stock LineageOS for the device. Testers are always welcome. ( t.me/tywinlannister7). The ROM will be updated whenever I get time and feel that an update is pending for the latest changes/fixes.
Unlock bootloader if not already done.
Flash TWRP Custom Recovery via fastboot.
Boot into Recovery Mode. (Custom Recovery Environment needed)
Make apt backups.
Wipe System, Data, Cache and ART Cache.
Flash the ROM zip.
Flash the GApps zip.
Reboot to System.
NON-ROOTED. Why?
Simply because some people want MagiskSU and some want SuperSU while some don't want root at all.
Downloads/links
TWRP: Latest 3.1.0 from here:
https://forum.xda-developers.com/g4-play/development/twrp-twrp-moto-g-play-t3453888
ROM: Sourceforge Folder
Open GApps: XDA Thread
Beans GApps: XDA Thread
Magisk: Magisk SuperSU: SuperSU
XDA:DevDB Information
LineageOS OMS [substratum][harpia], ROM for the Moto G4 Play
Contributors
tywinlannister7
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Stock Firmware
Based On: LineageOS
Version Information
Status: Testing
Created 2017-05-20
Last Updated 2018-11-04
Reserved :good:
@tywinlannister7
Finally, a ROM with no root, slim and with OMS. Something which squid2, Subhrajyothi Sen and others couldn't mimic (maybe Slim 7, but the download link is dead) Hats off from me!
Great work! Are you able to auto-build the rom whenever there is a lineagaOS build?
thanhvx said:
Great work! Are you able to auto-build the rom whenever there is a lineagaOS build?
Click to expand...
Click to collapse
Nope, I haven't set a server yet. Although, you will find the builds in my sourceforge folder. I will create builds whenever there is an update to be looked into and when I get time.
UPDATE: 22 May 2017
(wasn't able to post yesterday)
Download links are in the OP.
Changelog:
Code:
Deskclock: Revert "Fix alarm not firing in memory-pressure situations"
Source fixes
Building fixes from LineageOS git
Next update?
Ashutosh Sundresh said:
Next update?
Click to expand...
Click to collapse
https://forum.xda-developers.com/g4...ypheros-3-6-2-macchiato-t3596144/post72533942
Davey126 said:
https://forum.xda-developers.com/g4...ypheros-3-6-2-macchiato-t3596144/post72533942
Click to expand...
Click to collapse
Ummmm.........
Ashutosh Sundresh said:
Ummmm.........
Click to expand...
Click to collapse
Asking for ETAs isn't good. Please wait for the updates or use another ROM. And follow XDA Rules.
So @Bingo Bronson hates me and takes the chance to blow me every single time. Anyways, I heard Slim7 is back, anybody tried?
Changelog:
Android N 7.1.2_r17 merged
Fix Jelly conflicts
tywinlannister7 said:
Changelog:
Android N 7.1.2_r17 merged
Fix Jelly conflicts
Click to expand...
Click to collapse
Thx

[CLOSED][ROM][UNOFFICIAL]LineageOS 17.0

Code:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). *
Please do some research if you have any concerns about features included in the products you find here before flashing it! *
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. *
Your warranty will be void if you tamper with any part of your device / software. *
Same statement for XDA. */
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.​
This is an UNOFFICIAL build of lineageOS 17.0 by me. Before you ask, i will not be an official maintainer, i'm doing this for me mostly because i like android 10.
What's working :
-Boots
-RIL (Calls, SMS, Data)
-Fingerprint
-Wi-Fi
-Bluetooth
-Camera
-Camcorder
-Video Playback
-Audio
-Sensors
-Flash
-LED
-GPS
ISSUES:
-livedisplay not working
-permissive kernel
-wifi display
DOWNLOADS:
lineage-17.0-20191009-UNOFFICIAL-beryllium.zip
lineage-17.0-20191014-UNOFFICIAL-beryllium.zip
Kernel source
NOTE: CLEAN FLASH IS A MUST! even if coming from my first build. You need to flash DFE(non treble) if you are decrypted, don't know if encrypted boots since i run decrypted. Also, flash latest gapps beta.
Magisk canary here
DFE in attachments.
20191014 Update:
-Compiled with lineage kernel now and forever
-imported vibration patterns from marlin
-rom sources synced
Update note: Dirty flash is NOT tested, so do that on your own. If you have to dirty flash, then make sure to reflash gapps as well because it probably wont boot if you don't flash gapps also.
thanks man
Thanks for this Unofficial build. The more Android 10 ROMs are out the better it is for all of us.
Does it have basic lineage features
Raul11198 said:
Does it have basic lineage features
Click to expand...
Click to collapse
Yes. Only battery styles hasn't been implemented yet so the options don't work.
first LOS 17....
Does it have ability to restrict per-app cellular data usage like los16?
Is dual volte options there?
Another rom again Android 10 for our beloved poco f1.. Thanks for Sharing @DeHuMaNiZeD
bjee1020 said:
first LOS 17....
Click to expand...
Click to collapse
Here yes, but of course better with someone available developer.
Thanks mate for this build
Is firmware 10.3.8.0 recommended?
asparaz43 said:
Is firmware 10.3.8.0 recommended?
Click to expand...
Click to collapse
Yep
nevermind
DeHuMaNiZeD said:
Yep
Click to expand...
Click to collapse
Is this the reason why it won't boot on MultiROM?
What is the right flash sequence?
asparaz43 said:
What is the right flash sequence?
Click to expand...
Click to collapse
Same as for any ROM...
Format data and wipe everything else (for clean flash)
Firmware
ROM
Gapps (optional)
Dfe (optional)
good morning,
which gcam can i use?
Link for firmware 10.3.8.0 pls??
https://xiaomifirmwareupdater.com/firmware/beryllium/

[ROM] [Built from Source] 9.0 (Pie) CrDroid 5.5

Special thanks to @itexpert.120 for making this ROM bootable, smooth and stable.
CrDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them! *Not responsible for any damage caused to your device*
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
RIL (in-call audio, messaging, data)
Bluetooth (including audio)
WiFi
Audio (music, etc)
Camera (including video recording)
Flash
Sensors
GPS
Known issues:
NFC doesn't work
SE Linux is permissive
FOLLOW INSTRUCTIONS CAREFULLY OTHERWISE YOU WILL GET ERROR :
Reboot to recovery
Wipe cache, dalvik cache, data (If you have done format instead of wipe reboot the recovery once else it will end up with issues/errors)
Flash ROM
Flash Open Gapps (ARM - Pico (my recommendation) - 9.0)
Done- Reboot Now
Enjoy the clean ROM
Notes:
-Also, the device may overheat so install any kernel manager and enable the thermal driver (works without a overheating at all in my case)
-Set second sim to 2g if you want to have them both working
Minor Details:
-tripndroid default I/O scheduler.
-Extreme optimisations.
-GP kernel for best pefromance.
-Probably smoothest PIE ROM
Downloads:
ROM: https://www.androidfilehost.com/?fid=8889791610682893012
GAPPS:
https://opengapps.org
CREDITS/THANKS TO... @itexpert.120 [developer]
If you feel upset about not being credited, PM me and you'll be!
Sources:
-ROM https://github.com/crdroidandroid
-Kernel https://github.com/DoctorStrange96/android_kernel_samsung_msm8916
ROM information:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader / 3.2 TWRP
Based On: LineageOS
Very good rom sir, really very smooth. And battery is also very good. Thanks for this rom ?.
But sir I had a question, why samsung custom rom doesn't supports volte where as mi and other phones does support it. I am new to this world that's why I have some queries in my mind. I tried searching on google but no answers ?.
Revolution.. said:
Very good rom sir, really very smooth. And battery is also very good. Thanks for this rom ?.
But sir I had a question, why samsung custom rom doesn't supports volte where as mi and other phones does support it. I am new to this world that's why I have some queries in my mind. I tried searching on google but no answers ?.
Click to expand...
Click to collapse
The phone itself (J5 2016) doesn't support VoLTE. Samsung use some workarounds (aka tricks) to make the phone work over VoLTE. We didn't find any way to implement it in AOSP ROMs for now.
Update.
Changelog:
Fixed FM
Defined vendor patch lineage way
Used dexpreopt for heavy apps
Set mtp on default for USB
Shorten the shutdown time
Increase art heap growth to 192 mb
Added apex image
Tried to increase audio/volume
Fixed typo
Fix multi sim (wasnt broken In first place)
Used full res boot animation
Changed libhealthd.lineage to libhealthd.default
Increased Zram
Enabled doze
Disabled gfx something
Added some graphics tweaks
Added some ram management tweaks
Added zram tweaks
Added build.prop tweaks
Updated audio hal (lineage 17.1)
Updated boringssl
Added Advanced Display
& more
Individual build changelog
crDroid Pie build for J5xnlte
* ZX Kennel
* No call issues
* AOD present
* Perf Improvement
DO NOT DIRTY FLASH
DOWNLOAD LINK IN OP
(Link 404. Will be fixed soon)
NecromancerViper said:
(Link 404. Will be fixed soon)
Click to expand...
Click to collapse
Please fix it soon, I am really exited to test the rom ?.
Sources are broken, this drops support.
NecromancerViper said:
Sources are broken, this drops support.
Click to expand...
Click to collapse
Okay, so does that mean it is not accesible at all anymore? No mirrors or anything?
Link is not working

Categories

Resources