So I bought a son new phone.
As he told he installed magisk first, flashing "magisk_patched.img" through windows shell, everything was fine. Then He flashed twrp and magisk, everything was almost fine, he noticed that he cant play audio. He was trying to fix it first through installing magisk audio mods like viper and sauron. It didn't fixed anything, he unistalled it, everything was still in the same state, so he decided to flash stock frimware. He flashed through mi flashing tool, unfortunetaly It was image for "global xiaomi version" I mean "PFQMIXM" when as far as I know It should be "PFQEUXM". It didn't work and he was stuck in a bootloop. He found "MiUi 11 " image and for still unknown to me reason thought that it is going to fix everything. He flashed It again through mi flashing tool. It didn't work. He did that second time but at last he just closed the flashing tool while it was doing its thing.
At last he found eu firmware but now after all of that when i try to flash it or single files like crc list i get this:
flash crclist "E:\ModCR\adb\images\crclist.txt"
Sending 'crclist' (0 KB) FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
Device only boots to fastboot (no recovery/twrp either).
I tried erasing cache:
./fastboot erase cache
Erasing 'cache' FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
I tried to check slots:
./fastboot getvar active-slot
getvar:active-slot FAILED (Write to device failed (Unknown error))
Finished. Total time: 5.003s
I tried to change slot:
./fastboot set_active b
fastboot: error: Device does not support slots
When i typed "fastboot devices" It appeared as "??????"
./fastboot devices
???????????? fastboot
I don't know how to fix it, If anyone knows or has any kind of even small idea please write it down. I would be very greatfull.
Install custom recovery twrp
Install custom rom
Reboot
Download firmware EU
Install a firmware witch miflash
Restore Factory
Walaaaaa
xt610 said:
Install custom recovery twrp
Install custom rom
Reboot
Download firmware EU
Install a firmware witch miflash
Restore Factory
Walaaaaa
Click to expand...
Click to collapse
What i understand from op post is that fastboot commands are not working. So how will he flash twrp?
The firmware version doesn't matter at all you can flash EU on global and vice versa it doesn't matter.
What I think happened was your son never switched to slot 'a' before using mi flash.
Xiaomi's install script for miflash requires you to be on slot 'a' before flashing.
The only way to recover from this is edl mode which requires a xiaomi verified account to fix.
MOD EDIT: Part removed
Please do not advertise/recommend remote unlock services on XDA. Please read the FORUM RULES especially those:
Hi everyone!
I want to install TWRP on a P20 Lite with the main goal to install LOS16 and possible other custom ROMs. Therefore I was following the official guide on LOS.
However when I try to boot/flash the TWRP image-file with fastboot i receive the following error:
Problem
Code:
$>fastboot flash recovery twrp.img
Sending 'recovery' (14946 KB) OKAY [ 0.396s]
Writing 'recovery' FAILED (remote: 'partition length get error')
fastboot: error: Command failed
$>fastboot boot twrp.img
Sending 'boot.img' (14946 KB) OKAY [ 0.376s]
Booting FAILED (remote: 'invalid command')
fastboot: error: Command failed
Error is shown in admin command line as well.
Furthermore I get the following error which let me think that it is more of a fastboot problem.
Code:
$>fastboot getvar version
getvar:version FAILED (remote: 'invalid command')
$>fastboot oem device-info
FAILED (remote: 'invalid command')
fastboot: error: Command failed
Specs
Phone: Huawei P20 Lite ANE-LX1
Build:9.1.0.377(C432E7R1P7)
EMUI-Version 9.1.0
Bootloader unlocked - PHONE Unlocked, FRP unlocked (via PotatoNV method with same adb/fastboot installation).
Adb:
Android Debug Bridge version 1.0.41
Version 30.0.5-6877874
Info
Same error with adb/fastboot from two different PCs (Win10). Adb and fastboot seem to work in general. For example both show the device in List of devices attached and i can reboot and boot via adb and fastboot.
As I understand this post it is not possible to flash twrp directly on android 9.
However I tried the twrp file linked in the mentioned post and several images linked in this forum (this, this) + the one from twrp-anne and got the same error fastboot: error: Command failed on all.
Does anybody know or has a hint what might be the problem? Any help appreciated.
Best regards
I had the same issue.
You have to use the command: fastboot flash recovery_ramdisk twrp.img
yellowzebra said:
As I understand this post it is not possible to flash twrp directly on android 9.
Click to expand...
Click to collapse
Hello, please read carefully :
-Alf- said:
flash TWRP , run command
fastboot flash recovery_ramdisk (TWRP's_name).img
Click to expand...
Click to collapse
-Alf- said:
Since A8 and above you can not install TWRP over eRecovery from fastboot, only from TWRP:
Click to expand...
Click to collapse
- eRecovery and Recovery are two different things .
That worked!
Thank you very much. Both of you for the fast answer
I am currently researching before asking more noob questions. Have some thoughts. Especially on difference between eRecovery and Recovery and why commands as fastboot oem device info where not working before the recovery_ramdisk. Might return later.
Thx!
Hi, so several months ago i installed MIUI 12 weekly to my Xiaomi Mi A3, and now I wanted to upgrade to the stable release. When i was flashing a boot image file, after restart, my twrp dissapear. I tried to flash the rom using Mi Flash on PC, but i touched the cable and the phone disconnected, locking the bootloader in the process. I have no OS, my bootloader is locked. Is my phone truly dead?
I also forgot to uninstall Magisk root from my phone, so it's my full mistake. adb doesn't recognize my phone. I can only turn on the phone, leave it on boot until the battery drains, or the fastboot. Is there any chances that I can save my phone?
did you tray loading twrp when you are in fastboot mode?
gorankx said:
did you tray loading twrp when you are in fastboot mode?
Click to expand...
Click to collapse
I lost my twrp because i flashed the boot.img image from an rom.
try flashing new twrp when in fastboot mode or flash boot.img
gorankx said:
try flashing new twrp when in fastboot mode or flash boot.img
Click to expand...
Click to collapse
I can't. It says i cannot flash while in Lock State. Basically i can't do anything without unlocked bootloader.
well unlock it, you have 2 comands to put.
fastboot flashing unlock
fastboot flashing unlock_critical
FAILED (remote: Token Verify Failed, Reboot the device) after i used the commands you told me.
What should I do next?
And Mi Unlock tool can't unlock the device, because I need to change some settings in Developer Options, and I have no rom.
did you try switching slots?
fastboot getvar current-slot
Getvar Variable not found
f###,
then only some recovery option with
mi tools.
Download mi a3 platform tool file then download fastboot and fastboot unlock critical file paste these both in platform tool folder then plug device through fastboot to pc then first click on fastboot unlock and then fastboot unlocking critical it will be unlocked then install the rom through mi flash
Hello guys...
So, without going too much into details of how I idiotically f-ed up pretty much everything... I just want to say that I've already lost about 12 hours reading through the forum trying to solve the problem and to understand how everything works, and by what I understood... I bricked the phone?
Firstly, I managed to unlock the bootloader with the HCU Client (Phone unlocked, FRP unlocked). At some points I've managed to boot into TWRP's, but I flashed them without understanding that I should have installed the recommended ones by the guys on this forum instead of the official one, with which I wiped System and Data partition.
I've tried hard but never managed to boot any of the Custom ROMs available, especially the LineageOS 16 which I wanted but later on, through a specific TWRP which gave an error information that it's meant for Hisilicon, and not for Kirin SoC...
I also had no idea when I was booting into recovery, and when into erecovery, because I flashed TWRP over both of them... I have really no idea what was the last thing to happen, but now it seems as if I can't boot into eRecovery anymore, and whatever I try flashing to the recovery_ramdisk over Fastboot, I just always get the same error when trying to boot into recovery
Error! Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Now I'm also having an issue because my battery has drained and it doesn't seem to turn on without it being connected to the charger or a PC.
Is there anything that I can do to make it work with any Custom ROM?
returnedinformation said:
I've managed to boot into TWRP's, but I flashed them without understanding that I should have installed the recommended ones by the guys on this forum instead of the official one, with which I wiped System and Data partition.
Click to expand...
Click to collapse
This is the result of some people posting nonsense here.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
-Alf- said:
This is the result of some people posting nonsense here.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Click to expand...
Click to collapse
> fastboot oem get-build-number
(bootloader) :ANE-LX1 8.0.0.126(C432)
> fastboot oem get-product-model
(bootloader) ANE-LX1
> fastboot getvar vendorcountry
vendorcountry: hw/eu
> fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'The reason of failed input oem_nv_item error!')
fastboot: error: Command failed
> fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :ANE-LX1 9.1.0.132(C432E5R1P7)
-Alf- said:
This is the result of some people posting nonsense here.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Alf is right:
Gather info about your phone with the fastboot commands -Alf- provided.
Using this info, find TWRP that 100% supports your phone. TWRP that is recommended in the "p20 lite basics" thread on XDA.
Start phone in fastboot mode. Use the fastboot boot twrp.img command to TEMPORARILY boot into TWRP (twrp.img must be in the same folder as fastboot.exe)
If TWRP hangs, reboot, try another TWRP
Once you are in TWRP, perform wipe and advanced wipe to clean up EVERY PARTITION (except sdcard) that you've messed up in the internal memory.
wipe data again to enable USB file transfer
Find a ROM for your phone. USE THE INFO FROM STEP 1 to figure out if the rom is REALLY for your model AND hardware revision of the phone. Pay attention to the device serial number and codename! ROMS developers use device codenames to indicate what model is compatible and what isnt. Huawei p20 lite has a total of 7(!!!) hardware revisions, and ROMS for each are different and likely NOT cross-compatible, which means if you install the wrong one, you will end up with a brick or a bootloop.
While TWRP is still on, Transfer ROM.zip to the phone.
In TWRP, use "Install" option to flash the ROM.
DO NOT FLASH TWRP PERMANENTLY! LET THE STOCK RECOVERY BE. FLASHING TWRP TO A/B (DUAL SLOT) DEVICES WILL 99% RESULT IN A BOOTLOOP. MOST MODERN DEVICES ARE A/B.
Flash Gapps if you need.
Reboot. Will take longer to start on the first boot.
Totesnochill said:
Alf is right:
Gather info about your phone with the fastboot commands -Alf- provided.
Using this info, find TWRP that 100% supports your phone.
Start phone in fastboot mode. Use the fastboot boot twrp.img command to TEMPORARILY boot into TWRP (twrp.img must be in the same folder as fastboot.exe)
If TWRP hangs, reboot, try another TWRP
Once you are in TWRP, perform wipe and advanced wipe to clean up EVERY PARTITION (except sdcard) that you've messed up in the internal memory.
wipe data again to enable USB file transfer
Find a ROM for your phone. USE THE INFO FROM STEP 1 to figure out if the rom is REALLY for your model AND hardware revision of the phone. Pay attention to the device serial number and codename! ROMS developers use device codenames to indicate what model is compatible and what isnt. Huawei p20 lite has a total of 7(!!!) hardware revisions, and ROMS for each are different and likely NOT cross-compatible, which means if you install the wrong one, you will end up with a brick or a bootloop.
While TWRP is still on, Transfer ROM.zip to the phone.
In TWRP, use "Install" option to flash the ROM.
DO NOT FLASH TWRP PERMANENTLY! LET THE STOCK RECOVERY BE. FLASHING TWRP TO A/B (DUAL SLOT) DEVICES WILL 99% RESULT IN A BOOTLOOP. MOST MODERN DEVICES ARE A/B.
Flash Gapps if you need.
Reboot. Will take longer to start on the first boot.
Click to expand...
Click to collapse
As I said before
-Alf- said:
some people posting nonsense here.
Click to expand...
Click to collapse
Totesnochill said:
Alf is right:
Gather info about your phone with the fastboot commands -Alf- provided.
Using this info, find TWRP that 100% supports your phone. TWRP that is recommended in the "p20 lite basics" thread on XDA.
Start phone in fastboot mode. Use the fastboot boot twrp.img command to TEMPORARILY boot into TWRP (twrp.img must be in the same folder as fastboot.exe)
If TWRP hangs, reboot, try another TWRP
Once you are in TWRP, perform wipe and advanced wipe to clean up EVERY PARTITION (except sdcard) that you've messed up in the internal memory.
wipe data again to enable USB file transfer
Find a ROM for your phone. USE THE INFO FROM STEP 1 to figure out if the rom is REALLY for your model AND hardware revision of the phone. Pay attention to the device serial number and codename! ROMS developers use device codenames to indicate what model is compatible and what isnt. Huawei p20 lite has a total of 7(!!!) hardware revisions, and ROMS for each are different and likely NOT cross-compatible, which means if you install the wrong one, you will end up with a brick or a bootloop.
While TWRP is still on, Transfer ROM.zip to the phone.
In TWRP, use "Install" option to flash the ROM.
DO NOT FLASH TWRP PERMANENTLY! LET THE STOCK RECOVERY BE. FLASHING TWRP TO A/B (DUAL SLOT) DEVICES WILL 99% RESULT IN A BOOTLOOP. MOST MODERN DEVICES ARE A/B.
Flash Gapps if you need.
Reboot. Will take longer to start on the first boot.
Click to expand...
Click to collapse
Sorry, but I'm already stuck at step 3:
PS C:\adb> fastboot boot twrp.img
Sending 'boot.img' (15652 KB) OKAY [ 0.411s]
Booting FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
returnedinformation said:
Sorry, but I'm already stuck at step 3:
PS C:\adb> fastboot boot twrp.img
Sending 'boot.img' (15652 KB) OKAY [ 0.411s]
Booting FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Click to expand...
Click to collapse
I see. Some phones have this issue. where bootloader will not allow the "boot" command. Can be for a number of reasons:
1. Bootloader isnt "fully" unlocked, please check with the unlocking guide/service provider (if unlock was a paid service)
2. Bootloader is in "retail" mode, not a "service" mode. Some manufacturers do not intend for bootloader to be unlocked, and ship the devices with a restricted "retail" version that blocks certain commands.
also, why is your fastboot sending the "boot.img" while the command had " twrp img" as a payload?
I take it the bootloader still lets you use the "flash" command? If true, flash TWRP temporarily by "fastboot flash boot twrp.img", restart teh phone using the recovery menu keycombo
returnedinformation said:
> fastboot oem get-build-number
(bootloader) :ANE-LX1 8.0.0.126(C432)
> fastboot oem get-product-model
(bootloader) ANE-LX1
> fastboot getvar vendorcountry
vendorcountry: hw/eu
> fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'The reason of failed input oem_nv_item error!')
fastboot: error: Command failed
> fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :ANE-LX1 9.1.0.132(C432E5R1P7)
Click to expand...
Click to collapse
you've mixed apples and oranges nicely .
Try this way out, using HuRupdater
Guide
Downloand TWRP
Here
Totesnochill said:
Some phones have this issue. where bootloader will not allow the "boot" command. Can be for a number of reasons
Click to expand...
Click to collapse
No, there is only one reason - on Huawei devices we do not have a "boot" partition since Android 7.
-Alf- said:
you've mixed apples and oranges nicely .
Try this way out, using HuRupdater
Guide
Downloand TWRP
Here
Click to expand...
Click to collapse
Thank you, I've put them in blender and set it to "lightspeed" mode
I'm sorry, but flashing that TWRP gives me the exact error I've been getting before when trying to boot into Recovery... the fact that the phone can't charge also gives some headache to actually even try to boot into the recovery. I just can't get into.
Edit: The furthest I can get to is that recovery error message.
hi there..was reading about your problem..i'm not sure if the same rules apply to all or most phones with regards to flashing twrp or using fastboot..i'm assuming that they do.
So, are you able to boot into fastboot and/or recovery?
if no to recovery, i guess it may be the wrong twrp, i hope you can at least boot into fastboot without any issues.
Personally i had a xiaomi poco f2 pro 6/128 and then i bought another same model phone but 8/256 from a fellow who almost bricked his phone..it was just blinking, when i restarted the phone, it went straight into blinking whenever i tried to boot into recovery, and it wouldnt boot into system anyway cos there was nothing there. so i figured it was stuck in recovery loop.
i was fortunate that i was able to hook up to it using my pc...then using command prompt, i was able to switch to fastboot mode..then i tried downloading and flashing different twrps, over 10 different twrps, and finally one worked..then it was smooth sailing from then on..and presto, that became my daily use phone.
returnedinformation said:
Thank you, I've put them in blender and set it to "lightspeed" mode
I'm sorry, but flashing that TWRP gives me the exact error I've been getting before when trying to boot into Recovery... the fact that the phone can't charge also gives some headache to actually even try to boot into the recovery. I just can't get into.
Edit: The furthest I can get to is that recovery error message.
Click to expand...
Click to collapse
Can you boot into eRecovery (into TWRP installee over eRecovery)? If so, try to flash eRecovery_ramdisk.img in TWRP,
download Here for EMUI 9.1
or Here for 8.0 (I'm not sure what is your current version).
In eRecovery mode you can charge the phone ( charging should also work in TWRP which is installed instead of eRecovery).
flashgordon65 said:
hi there..was reading about your problem..i'm not sure if the same rules apply to all or most phones with regards to flashing twrp or using fastboot..i'm assuming that they do.
So, are you able to boot into fastboot and/or recovery?
if no to recovery, i guess it may be the wrong twrp, i hope you can at least boot into fastboot without any issues.
Click to expand...
Click to collapse
-Alf- said:
Can you boot into eRecovery (into TWRP installee over eRecovery)? If so, try to flash eRecovery_ramdisk.img in TWRP,
download Here for EMUI 9.1
or Here for 8.0 (I'm not sure what is your current version).
In eRecovery mode you can charge the phone ( charging should also work in TWRP which is installed instead of eRecovery).
Click to expand...
Click to collapse
I can boot to the Fastboot, but unfortunately I can't boot to either recovery or erecovery... When trying to boot to the recovery by holding the power+volume up button until I see the "Your device has been unlocked" warning message + 2 seconds (which is when I see the recovery error message), or when trying to boot while plugged into USB also holding the power+volume up button just leaves me at "Your device is booting now...." forever
returnedinformation said:
I can boot to the Fastboot, but unfortunately I can't boot to either recovery or erecovery... When trying to boot to the recovery by holding the power+volume up button until I see the "Your device has been unlocked" warning message + 2 seconds (which is when I see the recovery error message), or when trying to boot while plugged into USB also holding the power+volume up button just leaves me at "Your device is booting now...." forever
Click to expand...
Click to collapse
doesn't look good bro, try the following :
in fastboot mode run commands
fastboot erase user data
fastboot reboot
-Alf- said:
doesn't look good bro, try the following :
in fastboot mode run commands
fastboot erase user data
fastboot reboot
Click to expand...
Click to collapse
PS C:\adb> fastboot erase user data
Erasing 'user' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
returnedinformation said:
PS C:\adb> fastboot erase user data
Erasing 'user' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Click to expand...
Click to collapse
Sorry!
fastboot erase userdata
PS C:\adb> fastboot erase userdata
Erasing 'userdata' (bootloader) success to erase cryypt info in oeminfo
OKAY [ 0.215s]
Finished. Total time: 0.236s
PS C:\adb> fastboot reboot
Rebooting OKAY [ 0.024s]
Finished. Total time: 0.024s
Okay, what can I do now? I've tried flashing twrp right after that but solely rebooting get's me stuck at "Your device is booting now...", and trying to boot to recovery gives me the same error again
returnedinformation said:
PS C:\adb> fastboot erase userdata
Erasing 'userdata' (bootloader) success to erase cryypt info in oeminfo
OKAY [ 0.215s]
Finished. Total time: 0.236s
PS C:\adb> fastboot reboot
Rebooting OKAY [ 0.024s]
Finished. Total time: 0.024s
Okay, what can I do now? I've tried flashing twrp right after that but solely rebooting get's me stuck at "Your device is booting now...", and trying to boot to recovery gives me the same error again
Click to expand...
Click to collapse
Download stock Recovery Oreo
Link
Flash it in fastboot
fastboot flash recovery_ramdisk RECOVERY_RAMDISK-ANE-8.0.img
- fastboot reboot
Then try to boot into Recovery.
What exactly did you do after unlocking your phone? Did you upgrade back to A9? If so, then flash recovery_ramdisk A9
Download here
-Alf- said:
Download stock Recovery Oreo
Link
Flash it in fastboot
fastboot flash recovery_ramdisk RECOVERY_RAMDISK-ANE-8.0.img
- fastboot reboot
Then try to boot into Recovery.
What exactly did you do after unlocking your phone? Did you upgrade back to A9? If so, then flash recovery_ramdisk A9
Download here
Click to expand...
Click to collapse
I've tried both, they give me the same error.
After I flash the recovery I can't really reboot straight into recovery because of the issue with the battery... somehow I gotta hold the Volume UP key, while catching exact moment when I can unplug USB after the low battery status page passes, and before Huawei logo appears...
After unlocking the phone I flashed TWRP over either recovery or erecovery (idk anymore)... then I probably installed Pixel Experience 13 ROM (https://github.com/ponces/treble_build_pe/releases)
And after that... I tried too many things I can't even remember anymore.
returnedinformation said:
then I probably installed Pixel Experience 13 ROM
Click to expand...
Click to collapse
Under EMUI 8 ??? Which TWRP?