Hello everyone,
My phone has a small issue. It was running under lineage 15.1 and after an update never restarted correctly (bootloop).
The first thing I tried to do is going to twrp to restore a backup, but when in twrp, touchscreen does not work. It also doesn't work in eRecovery.
I saw somewhere on the forums that a boot.img flash was required, so I tried flashing a save I did a while ago, with no luck.
Also tried older and newer versions of twrp.
Can anyone help me ?
Related
Hi there, i'm writing this in hopes of someone reading it who give me some pointers.
i was running for the last years on CM 10.2.1 but i thought it was time for an update. update to CM 11.2 worked but my installed apps were making some weird troubles so i decided to do a factory reset and there my trouble started.
i flashed to boot.img in fastboot, cleared cache with fastboot cmd
format \system, \data, \cache and of course dalvik
flashed rom CM 11.2 (from official cyanogenmod site) via recovery sideload
rebooted and as my thread title says was stuck on CM boot sequence
i tried different CM roms, but always the same result. system wont end the bootup.
i even suspected a problem with CMW v6.0.4.8 and flashed TWRP from the CM 12.1 thread here in the forum.
so in short i can flash boot.img, recovery, different roms but in the end can't get it to work.
i would really appreciate some hints what i could do differently or maybe were i go wrong.
if you need more info i'm happy to supply them to you.
Thanks in advance.
solved by installing a TWRP backup and boot.img what i found on a german android site.
i was also able after that to install CM 12.1 unofficial and its running now. but i'm totally stumped what caused this weird problem to begin with. doesn't really matter now, i'm relieved it worked in the end.
Help me please, I have my Le Max 2 bricked, I got it already with twrp and rom cuoco installed, everything working perfectly when I decided to change the rom and put the small eui, so that during the configuration of the aroma I ended up selecting to clean everything I installed the flashback 1.9, I did the procedures and everything was happening without problems, after installing the twrp of the cuoco I tried to flash the small eui Again and again without success and then things got worse because the device started to stay in bootloop then with the blue led on, so I started to search here in the forum a solution, and I saw the recovery twrp 5.8 teamspain, and I did The installation by fastboot (since it is the only thing I have access to at the moment), and I managed to flash the twrp, I did the reinstall procedure of the cuoco rom, everything was going well and nothing from bootloop until when i I started the system in the part of choosing the language I took a while to make the settings and when I came back it was already the device with the screen erased and with blue led again, already tried to reinstall the rom by flashone and without success, already tried to install the Twrp again and nothing too, I do not know what to do being that I only have the fastboot to try something, can anyone help me? I do not know what to do here in a topic that could extract a rec.img from the zip of eui.58.014s but I do not find this rom for download nor the zip file, if anyone can help me I'll be grateful. Well, I'm giving up hope and sorry for English.
RaphaBraga23 said:
Help me please, I have my Le Max 2 bricked, I got it already with twrp and rom cuoco installed, everything working perfectly when I decided to change the rom and put the small eui, so that during the configuration of the aroma I ended up selecting to clean everything I installed the flashback 1.9, I did the procedures and everything was happening without problems, after installing the twrp of the cuoco I tried to flash the small eui Again and again without success and then things got worse because the device started to stay in bootloop then with the blue led on, so I started to search here in the forum a solution, and I saw the recovery twrp 5.8 teamspain, and I did The installation by fastboot (since it is the only thing I have access to at the moment), and I managed to flash the twrp, I did the reinstall procedure of the cuoco rom, everything was going well and nothing from bootloop until when i I started the system in the part of choosing the language I took a while to make the settings and when I came back it was already the device with the screen erased and with blue led again, already tried to reinstall the rom by flashone and without success, already tried to install the Twrp again and nothing too, I do not know what to do being that I only have the fastboot to try something, can anyone help me? I do not know what to do here in a topic that could extract a rec.img from the zip of eui.58.014s but I do not find this rom for download nor the zip file, if anyone can help me I'll be grateful. Well, I'm giving up hope and sorry for English.
Click to expand...
Click to collapse
Are you able to boot into TWRP recovery again? When you were in TWRP, did you do wipes first before tryin to install a ROM?
Yes I did the wipes, so now I do the twrp flash only that nothing happens, type appears until the installation all right but at the moment of starting the twrp it erases the screen and the blue led
Try EUI or LineageOS that I have linked below. Both are for the x829:
https://drive.google.com/drive/folders/0B_jI7m27ljxhVmtQWmx5NVF3NzA?usp=sharing
It might be helpful if you make of video showing what you are attempting, and what is happening on the screen of your phone too.
You might want to reinstall coco twrp. Also make sure the rom you flash has downloaded fully(that happened to me a few times, corrupt downloads). If rom file is OK it should flash correctly, otherwise you get the blue led
Sent from my Le X829 using Tapatalk
luisoman2000 said:
You might want to reinstall coco twrp. Also make sure the rom you flash has downloaded fully(that happened to me a few times, corrupt downloads). If rom file is OK it should flash correctly, otherwise you get the blue led
Sent from my Le X829 using Tapatalk
Click to expand...
Click to collapse
I have the official version twrp running on my X829. It works flawlessly.
https://twrp.me/devices/leecolemax2.html
Specifically ----------> https://dl.twrp.me/x2/twrp-3.1.1-0-x2.img.html
I am hoping someone can lead me in the right direction. I tried to update my LGV521 with LGUP using the uppercut way. I updated to file V52120f_00_1209.kdz and installed TWRP, rooted and installed SU. I kept getting an android system error so I stupidly did a system restore and now I cannot get out of TWRP. I have tried flashing Lineage OS, iPioneer and a stock rom and nothing works, I always reboot back into TWRP. I cannot get LGUP to recognize my device, I have tried updating the drives nothing has worked for me so far. My computer recognizes my device as b3 TARGET_DEVICE.
also not sure if its related, but I cannot get TWRP to mount my external SD card.
I have browsed to see if anyone else has had similar issues but I havent been able to find anything that works for me unfortunately. This isn't my first time rooting, but I also am not a pro.
I had an issue where my tablet kept going into TWRP after updating LineageOS, the commands on this post worked:
https://forum.xda-developers.com/showpost.php?p=73358490&postcount=201
Hi guys,
i have an old ASUS MeMOPad FHD10 LTE, which i am trying to use LineageOS with.
TLDR: suddenly no Touch input in TWRP Recovery AND LineageOS 15.1/16 after it worked at first, OTG cable with mouse/keyboard input as workaround, in stock ROM the touch input IS working without problems
I unlocked the bootloader, did a backup of stock recovery img, flashed TWRP v3.2.3-0 for [Asus_ME302KL][DUMA] (from here). I rebooted to TWRP and made a NANDROID backup and flashed LineageOS ROM 15.1 (from here)
Everything worked perfectly fine until here, i booted up LineageOS 15.1 successfully, then i tried to flash mindthegapps (from here), i noticed too late this was the 64bit Version and ofc it bugged out to hell.
I then wiped data/cache and flashed 15.1 ROM and this time i used opengapps full package for 8.1 and flashed it directly after, but on reboot LineageOS 15.1 got stuck (just rebooted after 20min loading screen).
Then after a few more steps and tinkering, including trying out Lineage 16 for ME302KL, at one point the touch input in TWRP stopped responding on entering recovery. Multiple restarts didn't help. I didn't do anything other then flashing ROMs and wiping data/cache (at some point /system too).
I plugged in an USB Mouse with OTG and was able to navigate and flash back the stock ROM from nandroid backup, the touch input worked just fine!
Then i rebooted into TWRP, still no touch. I flashed LineageOS 15.1 ROM, and to my shocking, also no touch input after booting up. Flashing back stock ROM did get it back to working again. I even flashed back the stock recovery IMG and re-flashed TWRP again, still no luck.
What else is there, that i can try?
I was thinking of fastboot erase/format in bootloader, which partitions do i have to delete for a FULL reset, since flashing back stock recovery/rom didn't help?
Got touch input working with twrp-3.1.1-0-duma (older version), proceeded to flash Lineage 14.1 for MeMOPAD10 FHD... still no touch input there.. im so confused, any help?
Got touch working now with AOSP Extended ROM: https://forum.xda-developers.com/android/general/rom-aosp-extended-v4-4-t3637692
For now i'll stick to that.. but why does it break on LineageOS?
Hi, May i know how you unlocked the boot loader? for me the .apk downloaded from ASUS is not working. it always says "An unkown error occurs, which may be a network connection issue. please wait and try again later".
is there any other way to unlock the bootloader? appreciate your response.
Hello, may I ask how you unlocked the boot loader?
Recently I installed Project Elixir 1.9, for some reason I decided to go to stock rom again, but I couldnt, first my TWRP was reboting all the time, I managed to solve it by installed another version, the problem now is that I cant install any rom, I mean not stock not custom rom because it is stuck on patching system image unconditionally, no matter what ROM i try to pacth, it always get stuck there and reboots TWRP, I've tried with many TWRP, Orange fox and PBRP, different versions of android and I cant do anything...
I even tried to unbrick it with flash tool and with other tools with no luck, anyone has the same problem? Anyone knows how to solve it and get back to custom rom?
As I mention I have access to TWRP and to fastboot, my device is RMX2170
Thanks a lot.