PpPmod for Realme UI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About PpPmod
PpPmod is a port of the excellent xXx NoLimits magisk ROM for Oxygen OS. It's a systemless modification to the default Realme UI that allows the user to get much more out of his device than the default configuration allows.
But why a magisk ROM?
For two reasons:
1. Realme devices offer good price to performance ratio, but in many cases they lack a developer community around them to build those ROMs the users want.
2. Realme UI is not that bad honestly. It offers good performance, it's not too crazy aesthetically and its bloatware isn't baked deep into the system.
It's also a much safer way to modify Mediatek devices. As long as you've managed to root your phone, you are good to go. If something goes wrong, just wipe data and no harm, no foul.
Supported devices
While in theory, any Realme device with Realme UI v1, Android 10 and a full HD screen resolution should be compatible, the only two devices this has been tested on are a Realme 6 and a Realme 6 Pro. For the curious, i own the later.
Ok, but what does it do?
- Port of xXx NoLimits for Oxygen OS
- Fully systemless Realme UI ROM mod for magisk
- Designed to work with all phones that run RealmeUI v1, Android 10 on full HD screens, including MTK ones
- Fully configurable installation, every component is optional
- Includes comprehensive debloating options
- Optional build.prop tweaks
- Many kernel tweaks that can be adjusted and combined, in order to target different degrees of performance and battery life
- 90hz/120hz for ALL apps when the display is set to its high refresh rate
- GMS Doze included
- Ability to disable analytics
- Ability to disable wakelocks
- Can enable full screen gestures (swipe up) for 3rd party launchers
- Ability to set custom bootanimations from a built in list, or as a user selected bootanimation.zip
- Includes extra launchers, sounds and icons from popular device brands like Pixel and OnePlus
- Gcams for both Qualcomm and Mediatek devices are included (by Urnyx and onFire)
- Youtube Vanced, detached from the playstore so no pesky updates can override it
- Google Dialer and Contacts, both old and new versions
- Custom density modes
- Ability to systemize apps
In order to set your own bootanimation, place a bootanimation.zip inside /sdcard/PpPmod. You can also place a shutdown/restart animation named rbootanimation.zip there. Make sure that your bootanimations are 1080 pixels in width, or they won't work as you'd expect. If you set option CustomBootAnimation to 1 in PpP.profile, your animations will be used during start up and/or reboot, instead of the default ones. For more information about the PpPmod folder and the PpP.profile file go to Installation Instructions.
If you want to systemize an app for whatever reason, just place the apk inside /sdcard/PpPmod/apps., before flashing.
Concerning debloating there is a master switch you should toggle if you want your individual options to work. Set IndividualDebloatSelection to 1.
Installation Instructions
You will find detailed installation instructions along with download links on post #3
Screenshots
For screenshots, press here
Thanks to:
xXx
ahmed_radaideh
dustintinsley
gloeyisk
k1ks
andip71
linuxct
Mostafa Wael
mrRobinson
osm0sis
rufus.wilson
snowwolf725
topjohnwu
Zackptg5
ZaneZam
Kevin Saiza
Tytydraco
XDA:DevDB Information
PpPmod, ROM for the Realme 6
Contributors
FatherJony
ROM OS Version: Android 10
ROM Firmware Required: RealmeUI
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2020-09-14
Created 2020-09-03
Last Updated 2020-09-14
Changelog
Version 1.1
Fixed a bug where enabling HighRefreshRate had no effect on the first boot after installation.
Updated Google Dialer to the latest version.
Updated sqlite to the latest version.
Reworked kernel tweaks, with some inspiration from Ktweak by tytydraco.
New ReadAhead option added. This allows the user to disable, or set the readahead cache to a percentage of the device's memory. Default is 1 (cache disabled).
New CPUGovernorTweaks option added. When this is enabled, schedutil and interactive governor tunables are tweaked in order to increase performance. The default governor will also switch to schedutil or interactive depending on availability. Default is 1 (enabled).
Reworked CPUInputBoost option to make it more granular. You can now select from small, medium, high and max presets. For more info about them read the profile description.
Reworked CPUStuneBoost option to make it more granular. You can now select from small, medium, high and extreme presets. For more info about them read the profile description.
Installation
PpPmod allows for a fully customizable installation. The way this works is via a configuration file called PpP.profile. You will always be able to find the latest version of this file on this post. Make sure you edit this file on Notepad++ if you are opening it on Windows in order to preserve the Unix EOL format.
Requirements:
Realme UI v1 on Android 10 and display width of 1080 pixels
A working Magisk installation of v20.4 or higher
PpPmod should only be flashed via Magisk Manager
First time installation:
Place PpP.profile in /sdcard/PpPmod/ and edit it to personalize the installation to your liking
Flash the PpPmod zip via Magisk Manager
Reboot. Wait for at least a minute to let all installation options take effect.
Done
The first time you install, chances are that the PpPmod folder will not be in /sdcard, so you have to create it yourself. If you don't place PpP.profile there, the mod will be installed with the default options when you flash it and place the default PpP.profile inside /sdcard/PpPmod/.
Update to a newer version:
Open Magisk Manager and uninstall the previous version
Reboot
Wait for a couple of minutes after reboot as the uninstallation process can take some time
Install the newer version via Magisk Manager. Don't worry about changes to PpP.profile, they will be merged to your older version profile
Reboot. Wait for at least a minute to let all installation options take effect
Done
Uninstallation:
Press the waste bin icon next to the mod's name on the Magisk Manager
Reboot. Wait for a couple of minutes after reboot as the uninstallation process can take some time
Done
Downloads:
PpPmod v1.1
PpP.profile v2
PpPmod v1.0
PpP.profile v1
FAQ
Q: I just installed PpPmod and my phone has heated up and stutters, is this normal?
A: Yes, the installation process is fairly intense, and during the first boot following the installation, a lot of stuff happens in the background. Just let your phone settle for 10 minutes and it should be fine.
Q: I did all that and my phone still heats up, you liar!
A: Well, check your settings. PpPmod offers many options for tweaking, but not every one of them is suitable for all phones, or all usage patterns. In general, the higher performance settings may be fine for general usage and offer you a flagship like experience along with a high refresh rate, but will cause excessive heat and throttling during gaming.
For example, maybe a 12nm chipset shouldn't be pushed aggressively by enabling CPU boost options, especially if you game alot. You may gain a brief performance boost that will sooner or later be the cause of intense overheating, which will cause throttling, which will cause stutters. In short, try to be reasonable with your settings and expectations, PpPmod will not magically turn your mid range chipset into an SD865.
PpPmod is also not designed to work along with other magisk mods that adjust performance by altering kernel behavior. If you want to use such mods with it, try disabling every PpPmod performance setting, like:
KernelTweaks
LMK_RAM_Management
ReadAhead
DisablePeWq
DisableHotplugging
IncreaseMinGPUFreq
CPUGovernorTweaks
CPUStuneBoost
CPUInputBoost
The result may still not be ideal, but this is your best bet.
Q: My debloating options aren't working!
A: You forgot to set option IndividualDebloatSelection to 1.
Q: I think i found a bug, what is the best way to report it?
A: You should always include a detailed description of what triggers the bug, its effects, your specific phone model (including hardware characteristics like RAM and storage), firmware version, your PpP.profile and preferably a logcat from when the bug occurred.
Q: Can i be a beta tester? I swear i am awesome!
A: As long as you meet certain conditions, sure! The conditions are:
First and foremost, you must understand that beta testing doesn't mean early access. Most of the time you will have to do things that may be inconvenience you, or lead to loss of time and data (factory resets)
You should know at the very least how to setup and use adb
You should have A realme device with Android 10 and Realme UI v1
Q: Can i ask for a feature?
A: Sure, but keep in mind that PpPmod isn't primarily geared towards a specific device. So while device specific features are not out of the question, priority will be given to features that affect a range of devices.
Q: My phone isn't listed in supported devices, but it's a Realme device with Realme UI v1, Android 10 and a full HD resolution, should i give this a try?
A: Yes, as long as you don't mind resetting your data if something goes wrong, you should. That's exactly what i am trying to achieve with this mod. Normally, a new phone like for example the Realme X7 Pro would not have any options for customization on release, and may never get much due to the Mediatek soc. But PpPmod should work immediately, at least in theory. Even if there are some device specific issues i will do my best to fix them, and in the worst case scenario the phone is still safe from any permanent harm. Just reboot to recovery and reset data.
Q: PpPmod sucks and i wanna uninstall it. Must i also remove magisk?
A: NO, you don't have to and in fact you shouldn't if you don't have a reason unrelated to PpPmod, as magisk resides in your boot partition and thus unlike PpPmod, can mess with your device if you aren't careful.
Q: What does PpP mean?
A: No one knows fo sure. Some thik that it means Pro Plus Prime. Some other, less charitable persons claim it means PapaPowah instead. We may never know the truth.
Q: What do you plan for your next project?
A: Rewriting Android in Objective Cobol
Q: Is it true that you are actually a boomer?
A: Ok, that's enough. You guys have crossed the line and now i am forced to conclude this QA session.
FatherJony said:
Reserve
Click to expand...
Click to collapse
Good job dude
Does it work for RMX2001 Realme 6(india). I would assume it does as mentioned in OP. however, i would just like to confirm. don't want to brick my new phone.
PapaSid26.12 said:
Does it work for RMX2001 Realme 6(india). I would assume it does as mentioned in OP. however, i would just like to confirm. don't want to brick my new phone.
Click to expand...
Click to collapse
Yes, it works. But the whole point of a systemless mod is that you CAN'T brick your phone. Worst case you will just have to wipe data via recovery.
great job but will it work for eu version to (rmx2001)
we are unable to unlock bootloader with deeptesting.apk and nobody seems to care..
marvinvvh said:
great job but will it work for eu version to (rmx2001)
we are unable to unlock bootloader with deeptesting.apk and nobody seems to care..
Click to expand...
Click to collapse
I am sorry to hear that about the EU version. I thought that this would have been resolved by now. Unfortunately this is a magisk mod, thus it doesn't work without magisk.
Even after making changes in PpP.profile I'm getting default settings
Shanpatil said:
Even after making changes in PpP.profile I'm getting default settings
Click to expand...
Click to collapse
You have to make the changes and save them before flashing the mod. Meaning that if the mod is already flashed and you make changes to PpP.profile, you have to remove the mod and reinstall it in order to get the new settings.
FatherJony said:
You have to make the changes and save them before flashing the mod. Meaning that if the mod is already flashed and you make changes to PpP.profile, you have to remove the mod and reinstall it in order to get the new settings.
Click to expand...
Click to collapse
Can u give some SS??
I bricked my phone...
Yep, title says it all.
It was supposed to be systemless though right?
So what happened was, I successfully rooted the phone, installed magisk using the manager, download both the profile and the mod itself. 1st installed the mod using magisk without the profile installed, got some bugs like green screen on viewfinder, default camera app though so i thought the problem lies within the profile settings so... uninstalled then installed 2nd with the profile on. Still got green screens, videos goes green as well, and UI restarts when I try to access stock launcher widgets. So i decided I'd uninstall the mod and magisk as well, and so i did. Restarted on each uninstall, and gave time as instructed. After magisk I got stuck on boot. Only access is to recovery and I can't seem to find any SP flash tool options like other mediatek devices have. 1st time on a realme phone as well. Any thoughts on where I actually fd up?
Edit: Tried wiping data but to no avail. (wipe and format)
fraillesgeon said:
Yep, title says it all.
It was supposed to be systemless though right?
So what happened was, I successfully rooted the phone, installed magisk using the manager, download both the profile and the mod itself. 1st installed the mod using magisk without the profile installed, got some bugs like green screen on viewfinder, default camera app though so i thought the problem lies within the profile settings so... uninstalled then installed 2nd with the profile on. Still got green screens, videos goes green as well, and UI restarts when I try to access stock launcher widgets. So i decided I'd uninstall the mod and magisk as well, and so i did. Restarted on each uninstall, and gave time as instructed. After magisk I got stuck on boot. Only access is to recovery and I can't seem to find any SP flash tool options like other mediatek devices have. 1st time on a realme phone as well. Any thoughts on where I actually fd up?
Edit: Tried wiping data but to no avail. (wipe and format)
Click to expand...
Click to collapse
The mod is indeed systemless, but magisk isn't. If you'd asked for help before attempting to uninstall magisk (for no reason i might add), i would have explained that the module files can be found in /data/adb/modules/RealmeUI_PpP_mod and you can remove them manually if you have issues. But removing magisk on mediatek does mess with boot partition so it can brick your phone. Fortunately for you, if you can enter fastboot mode you are not truly bricked yet. What i am assuming happened is that your boot.img was restored to the factory one but vbmeta (which i am assuming you also replaced with a patched one in order to root your device) wasn't. Be extra careful with what you do from now on as you can really brick your device. I would suggest downloading the exact rom version you have installed on your phone, extracting the boot and vbmeta images and flashing them via fastboot. If you are not experienced with this kind of stuff you should download telegram and seek help in the Realme 6 community there.
FatherJony said:
The mod is indeed systemless, but magisk isn't. If you'd asked for help before attempting to uninstall magisk (for no reason i might add), i would have explained that the module files can be found in /data/adb/modules/RealmeUI_PpP_mod and you can remove them manually if you have issues. But removing magisk on mediatek does mess with boot partition so it can brick your phone. Fortunately for you, if you can enter fastboot mode you are not truly bricked yet. What i am assuming happened is that your boot.img was restored to the factory one but vbmeta (which i am assuming you also replaced with a patched one in order to root your device) wasn't. Be extra careful with what you do from now on as you can really brick your device. I would suggest downloading the exact rom version you have installed on your phone, extracting the boot and vbmeta images and flashing them via fastboot. If you are not experienced with this kind of stuff you should download telegram and seek help in the Realme 6 community there.
Click to expand...
Click to collapse
First of all, thanks a lot for replying. Really cleared everything out.
HAHAHA YEAH there was no reason to uninstall magisk at all, wonder why i actually did that. For science I guess?
And so I have the vbmeta and boot img from the B.45 patch, i can get to recovery and i connected my phone to my pc the only problem is i can't seem to authorize my phone for adb. (RSA Key prompt doesnt happen on recovery), any other way to get to fastboot?
EDIT: THERE WAS! (assuming that download mode is fastboot) I kept pressing the version at the bottom of the screen on recovery and it showed a prompt to go to download mode. Unfortunately though, can't seem to access it. It just automatically restarts on REALME boot.
fraillesgeon said:
First of all, thanks a lot for replying. Really cleared everything out.
HAHAHA YEAH there was no reason to uninstall magisk at all, wonder why i actually did that. For science I guess?
And so I have the vbmeta and boot img from the B.45 patch, i can get to recovery and i connected my phone to my pc the only problem is i can't seem to authorize my phone for adb. (RSA Key prompt doesnt happen on recovery), any other way to get to fastboot?
EDIT: THERE WAS! (assuming that download mode is fastboot) I kept pressing the version at the bottom of the screen on recovery and it showed a prompt to go to download mode. Unfortunately though, can't seem to access it. It just automatically restarts on REALME boot.
Click to expand...
Click to collapse
I did the same mistak. Howevre here is a solution.
If you have sd card, download latest ozip file from realme wessbite and place in root of sd card. Then insert it into your realme 6 and boot into recovery using power and vol down. After that install zip from total storage and install from sd card. Hopefullt it will be back.
On an another note there shall be some key combo for booting into fastboot mode
Yes, you can install via recovery if you can push the ozip to /sdcard. But when the boot or vbmeta imgs are modified sometimes the installation fails. Hopefully it will work for @fraillesgeon.
As for PpPmod, i would appreciate if you guys could report the specific bugs you encountered and provide me with your PpP.profile settings. I cannot improve this for Realme 6 without your help as i don't own the device. I do have a few beta testers but sometimes they will miss stuff, it's only natural.
I'm back!
FatherJony said:
Yes, you can install via recovery if you can push the ozip to /sdcard. But when the boot or vbmeta imgs are modified sometimes the installation fails. Hopefully it will work for @fraillesgeon.
As for PpPmod, i would appreciate if you guys could report the specific bugs you encountered and provide me with your PpP.profile settings. I cannot improve this for Realme 6 without your help as i don't own the device. I do have a few beta testers but sometimes they will miss stuff, it's only natural.
Click to expand...
Click to collapse
Well I've been doing it for days, it seems I was just using a broken sdcard and when it patches it fails, I thought that the phone was totally broken though lols. Well I'm back and installing PpPMod now.
And during my desperate attempt to fix the phone, I was searching for solutions, and found out that the camera problem and reboots was from a buggy boot and vbmeta img in the flash tool I used (the one posted and is now updated with a new one).
well that's that, I'll check the mod up for bugs and hope it helps as much as you helped me fatherjony, Thanks alot!
Can you do the step by step process on how to flash it using magisk?
fraillesgeon said:
Well I've been doing it for days, it seems I was just using a broken sdcard and when it patches it fails, I thought that the phone was totally broken though lols. Well I'm back and installing PpPMod now.
And during my desperate attempt to fix the phone, I was searching for solutions, and found out that the camera problem and reboots was from a buggy boot and vbmeta img in the flash tool I used (the one posted and is now updated with a new one).
well that's that, I'll check the mod up for bugs and hope it helps as much as you helped me fatherjony, Thanks alot!
Click to expand...
Click to collapse
Great news! I am really glad you were able to save your phone. As a rule, only use internal storage (/sdcard) for important operations.
I am looking forward to your impressions!
Related
Hello Everyone,
Below is a tutorial I have compiled and translated from bbs.anzhi.com on how to update your Huawei Ascend D1 Quad XL (U9510E) to the latest version of Android offered by EmotionUI, Jelly Bean 4.1.2:
First of all, I want to give credit where credit is due:
genokolar (aka G大) - Creator/Modder of the Custom Recovery for this, and many other phones coming out of China
Ry09iu (aka R大) - Creator of a Rooted ROM based on EmotionUI B534, which is based on Android 4.1.2
【LUV】 - The board moderator for the D1Quad section of bbs.anzhi, also who's ROM release I used for my phone, but it's upto you to choose which one you want to use
**IT IS NOT RECOMMENDED FOR YOU TO ATTEMPT THIS IF YOU DO NOT HAVE A PREVIOUS EXPERIENCE WITH FLASHING PHONES. IN THE CHANCE THAT YOU BRICK YOUR PHONE, I CANNOT BE HELD RESPONSIBLE FOR IT**
**DON'T FORGET TO BACKUP YOUR FILES!!**
Now that the credits and the warning are given, let's get started:
Required Tools:
1. Recovery 6.0.1.9: This tool will open in command prompt and will allow you to flash in the Custom Recovery created by genokolar, as well as the stock recovery released by Huawei. Mirror
2(a).Official ROMs:
i. Official EmotionUI ROM B551 (Updated January 11, 2013): Release Notes
2(b).Custom ROMs:
i. Rooted Version of EmotionUI Rom (Author: genokolar):
- B534 Download
ii. Rooted Version of EmotionUI Rom (Author: Ry09iu):
- B534 Download
- B538 Download
iii. Rooted Version of EmotionUI Rom with HOLO as default Launcher (Author: Ry09iu, Modded by LUV):
- B534 Download
- B538 Download
- B542 Download
iv. MIUI V4.1 - converted from MIUI V4.1 for Honor 2 (Author: Ry09iu):
- Download
3. GApps [Jelly Bean 4.1.2 (Author goo.im/gapps)]: Download
*The roms are hosted in China so the download will be slow, please be patient and your download will be done in an hour or two *
**PLEASE PLACE THE ROM YOU WISH TO UES INTO YOUR EXTERNAL SD CARD BEFORE CONTINUING**
Step 1: Flashing Custom Recovery
1. Turn-on USB debugging on your phone [Settings -> Developer Settings -> USB debugging]
2. Plug in your Phone to your computer via USB for it to install the appropriate drivers*
3. Run recovery6.0.1.4_AscendD1Q.exe
3.5 If your system locale is set to anything other than Chinese, you will get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But what you should see is this:
What that means is: said:
**-1. Flash Chinese Custom Recovery-**
**-2. Recover Official Recovery-**
##-3.Reboot phone into Recovery-##
Click to expand...
Click to collapse
4. Type in "1" and press Enter -> This Recovery Flasher will do what it's made to do and when it's completed, your phone will now have a custom recovery.
5. The application will automatically close 10 seconds after the Recovery has been successfully flashed.
Note from Genokolar said:
1. The development of this Custom Recovery was done through email with Huawei so it may be lacking certain features, a full custom recovery will be released as soon as responds him
2. This recovery will only flash from an external SD Card, internal SD card flash is not yet supported
3. At the time of this Custom Recovery being posted, no third-party ROM has been released, therefore it has not been tested <- No longer the case
4.This recovery can be used to Root the EMUI ROMs released by Huawei
5. When you need to flash back to the original ROM releases by Huawei, or receive OTA updates from Huawei, please flash back the original Recovery
Click to expand...
Click to collapse
*If the drivers do not install properly, please download the driver attached in this post and install it manually.
Step 2: ROM Flashing
1. Boot your phone into the new recovery. (either by starting the application again and selecting option 3, or press and hold the Power Button with Volumn Up)
2. You will be greeted by the Custom Recovery Screen show below:
[*] Reboot system now
[*] Select zip to flash/install
[*] Wipe data
[*] Wipe cache
[*] Backup and restore
[*] Flash memory/Format
[*] Advanced setting
[*] Turn off phone
Click to expand...
Click to collapse
3. Scroll to select option 3 (Wipe data), confirm the wipe
4. Scroll to select option 4 (Wipe cache), confirm the wipe as well
5. Scroll to select option 2 (Select zip to flash/install)
[*] Select zip from SD Card to Flash
[*] Install /sdcard/update.zip
[*] Activate/Deactivate Signature Verification
[*] Install from external zip
<-- Back to previous screen
Click to expand...
Click to collapse
6. Scroll to and select option 4 (Install from external zip)
7. Scroll to and select the zip file of the ROM which you have previously downloaded and placed into your external SD Card, confirm the flash
7.5. At this point, you can either flash in the gapps right away, or flash it after rebooting into the OS. I chose to flash it after booting into the OS for the first, but I don't think it will cause any problems. I will be posting the way I did it, and if you guys did it the other way, let us know if it worked or not
*IMPORTANT NOTE*
When you're booting up your system out from Recovery, you will be asked whether or not you would want your ROM to auto update the recovery, shown below:
[*] Yes - Forbid Auto Update of Recovery
[*] Cancel - Back
<-- Return to previous
Click to expand...
Click to collapse
Please select the one being highlighted in the image, which is option 2 ([*] Cancel - Back). OR CONSEQUENCES WILL NEVER BE THE SAME!
Step 3: Flashing GApps
1. Boot into recovery
2. Scroll to and select option 4 (Install from external zip)
3. Scroll to and select the zip file of GApps you have downloaded "gapps-jb-20121011-signed.zip" or whatever you may have renamed it to, confirm the flash
4. Reboot into OS
5. *THE NOTE ABOVE STILL APPLIES, SO HERE IT IS AGAIN*
*IMPORTANT NOTE*
When you're booting up your system out from Recovery, you will be asked whether or not you would want your ROM to auto update the recovery, shown below:
[*] Yes - Forbid Auto Update of Recovery
[*] Cancel - Back
<-- Return to previous
Click to expand...
Click to collapse
Please select the one being highlighted in the image, which is option 2 ([*] Cancel - Back). OR CONSEQUENCES WILL NEVER BE THE SAME!
Click to expand...
Click to collapse
Step 4: ALL DONE!
Congratulations, assuming everything was done properly, and everything worked out, now you will have Android 4.1.2 on your Huawei Ascend D1 Quad XL.
Images not showing up in your GooglePlay Store? YouTube not working?
Here is how our very own 12andy fixed the problem:
12andy said:
UPDATE: So using a clear hosts breaks the ability to connect to Facebook (via app and website). It's best to use AdAway, instead.
Nvana, it's the same process we've been using to flash the Chinese ROM(s), but with the added step of "fixing" the hosts file:
download SmartHosts from Goole Play (free)
tap on "Toggle hosts file" button
select "Clean hosts file"
And you're done! Rebooting wasn't necessary either, as the images started loading immediately.
Click to expand...
Click to collapse
Thank you for translating this! I do have a several question though.
1) Is it possible to edit the recovery so we can implement English into it? Maybe you can collaborate with the dev that made the recovery and ask him to make an English version of it??
2) I did a little research and I think the Chinese ascend is u9508 where ours u9510e. would there be any conflict or some features not usable?
3) I know you can change the system language but I am just wondering is there any difference in the chinese version of 4.1 vs the english version? or its just simply a language pack thing?
Wish you were in the 'GVA'
Thanks for doing this! Hope more people can test it out. I am bit too busy to play with my phone now so I'll do it in a week or so!
Keep up the good work!
nvana said:
Thank you for translating this! I do have a several question though.
1) Is it possible to edit the recovery so we can implement English into it? Maybe you can collaborate with the dev that made the recovery and ask him to make an English version of it??
2) I did a little research and I think the Chinese ascend is u9508 where ours u9510e. would there be any conflict or some features not usable?
3) I know you can change the system language but I am just wondering is there any difference in the chinese version of 4.1 vs the english version? or its just simply a language pack thing?
Wish you were in the 'GVA'
Thanks for doing this! Hope more people can test it out. I am bit too busy to play with my phone now so I'll do it in a week or so!
Keep up the good work!
Click to expand...
Click to collapse
Hey no problem at all,
1) I will suggest that to him, no problem, but not sure if he's willing to accept it though, but I'll try
2) The U9508 is actually the Honor 2, not the same as the D1 Quad XL. The Honor 2 was designed as a high powered budget ranged device to counter the XiaoMi M2 and the D1 Quad XL was supposed to be their flagship device. Although there is actually a Honor 2 with 2GBs of ram though lol
So to answer your question, this was made specifically for our phone the U9510E
3) Huawei has not yet released an international version of the EmotionUI for our phone, so the only way to get Jelly Bean on our phones is to run the Chinese version of the ROM. And to be honest, there aren't any major differences. For example, one difference is that the Chinese version will not have the Google apps, but we can patch it in by flashing the gapps from goo.im. I think the only difference would be that the international versions will have more language support.
Haha no problem, let me know when you do get to try it out
I've tried it many times however it did not work. The connection to the Chinese server seems to be established, unfortunately the ROM download did not start.
Got JB up and running late last night!
Please see my notes below.
ROM download:
make SURE that the ROM you download is in ZIP format; the recovery does NOT recognize 7z files (as expected)
for this reason, I downloaded version B
use Flashget to grab the file (saves a lot of time and grief in the event of network disconnections)
Flashing Custom Recovery:
the phone's drivers MUST be installed first
I think the program must be run first as well, prior to plugging the phone in (the procedure would only work once I toggled my phone from Mass Storage to Hi, and back to Mass Storage again)
Flashing GApps:
I flashed GApps right after flashing the ROM, but my phone sat at the Huawei logo even after multiple reboots
I went back into Recovery and performed a wipe, which fixed the problem
upon booting, I only had to install Gmail; Play Store was intact, and might've been included with the ROM already
ROM Impressions:
language selection was one of the first screens shown, so that part was very straightforward
don't know if it's a JB thing, but scrolling performance has improved irrespective of performance setting - smoother, with less input delay (say, scrolling up and down very quickly)
camera UI slightly changed (cleaner, perhaps?); continuously auto-focuses as you move the phone, so hitting the shutter "button" results in near instantaneous response (cool!)
more notification bar toggles - can be rearranged to a certain point
themes implementation - not really a fan of this, as I prefer the stock Android look/ feel for the most part; choice of vanilla Android is available
lock screen shortcuts can only be modified if using a theme
stock SMS client isn't vanilla Android - looks nicer, but isn't as responsive IMO
menu/ submenu background is near white - probably a bug, as white text on a near white background is just painful; probably not great for battery life either, and is not consistent with ICS+ Android colours
Dropped by the Chinese forum (yay for Chrome auto-translate!) to see if I can decipher any pending updates, but to no avail, lol. Looks like these ROM authors are also focusing on optimizations as well - happy to see that.
REALLY hoping this phone gets more popular very soon, and receives the Cyanogenmod 10 treatment.
Many thanks, Simon! Any chance you could convince the ROM authors over there to volunteer to become CM10 maintainers for our phone?
-AdMiRaL- said:
I've tried it many times however it did not work. The connection to the Chinese server seems to be established, unfortunately the ROM download did not start.
Click to expand...
Click to collapse
Hmm, what browser are you using? I noticed that my Chrome sometimes had problems loading the site because of the extensions I was using, maybe try it again in IE?
12andy said:
Got JB up and running late last night!
Please see my notes below.
ROM download:
make SURE that the ROM you download is in ZIP format; the recovery does NOT recognize 7z files (as expected)
for this reason, I downloaded version B
use Flashget to grab the file (saves a lot of time and grief in the event of network disconnections)
Flashing Custom Recovery:
the phone's drivers MUST be installed first
I think the program must be run first as well, prior to plugging the phone in (the procedure would only work once I toggled my phone from Mass Storage to Hi, and back to Mass Storage again)
Flashing GApps:
I flashed GApps right after flashing the ROM, but my phone sat at the Huawei logo even after multiple reboots
I went back into Recovery and performed a wipe, which fixed the problem
upon booting, I only had to install Gmail; Play Store was intact, and might've been included with the ROM already
ROM Impressions:
language selection was one of the first screens shown, so that part was very straightforward
don't know if it's a JB thing, but scrolling performance has improved irrespective of performance setting - smoother, with less input delay (say, scrolling up and down very quickly)
camera UI slightly changed (cleaner, perhaps?); continuously auto-focuses as you move the phone, so hitting the shutter "button" results in near instantaneous response (cool!)
more notification bar toggles - can be rearranged to a certain point
themes implementation - not really a fan of this, as I prefer the stock Android look/ feel for the most part; choice of vanilla Android is available
lock screen shortcuts can only be modified if using a theme
stock SMS client isn't vanilla Android - looks nicer, but isn't as responsive IMO
menu/ submenu background is near white - probably a bug, as white text on a near white background is just painful; probably not great for battery life either, and is not consistent with ICS+ Android colours
Dropped by the Chinese forum (yay for Chrome auto-translate!) to see if I can decipher any pending updates, but to no avail, lol. Looks like these ROM authors are also focusing on optimizations as well - happy to see that.
REALLY hoping this phone gets more popular very soon, and receives the Cyanogenmod 10 treatment.
Many thanks, Simon! Any chance you could convince the ROM authors over there to volunteer to become CM10 maintainers for our phone?
Click to expand...
Click to collapse
Great to see that everything worked! I hated their custom UI too, that's why I opted for HOLO Launcher HD for the stock JB feel
Supposedly Huawei will be working with genokolar to fully unlocked the bootloader and release a full custom recovery sometime this week so that should open up doors for other developers
And I don't even think they'll need any convincing, this thread here is a member of their development team releasing CM10 for the Ascend P1, so it's just a matter of time!
You're welcome
simonfzhao said:
Hmm, what browser are you using?
Click to expand...
Click to collapse
I tried to download via firefox however with using flashget as pointed out by Andy the download started immediately, for whatever reason.
I am also sure that this phone gets most popular soon because of a successfull compromise - strong battery, most compact size ( one-hand operation), 4,5" IPS+ display, quad core cpu and microSD. So keep your fingers crossed that our phone gets their own forum.
I do hope we get our own page but the thing that is stopping this phone from getting popular are
1) Hard to get your hand on one (BIG ISSUE)
2) Too late to join the quad core market (most people on S3 already and another big issue i mean who in their right mind is gonna give up s3 for this? and you can get a used S3 or BNIB for almost the same price of this phone if you try to import it...)
3) Try to ask anyone if they know what Huawei is ... most-likely they will be like `"what and where" ;p
4) This phone seems to be more appealing to the minority which are us who like to mess around and install Roms... and mess around during the day and runs out of battery (one reason why I choose GNex over many other great phone and one time i flashed 2 different Rom in one day at school because i was bored and then ending up running out of battery).
Yeah i hope their next phone would really make a dent in the market! But for now they already missed their chance to speak up and choose to forever hold their peace...
Well anyways while I am blah blah ing i just finished Downloading the Rom using Chrome, No Problem and took me less then 30 min. Well report back after i flash... which I should be studying for finals but... just cant stand the temptation you guys are posting....
Edit: Rom option 2(b)
So I got the rom to install but are faced with a few issue
1)*solved* Boot animation sound, I am ok with the boot animation but i dont like having sound... Would fast boot wolve that? or it takes the whole boot animation off? (Apparently if you turn the phone off in silent it will not make a sound when you turn it on!)
2) Play store not showing any image... I am not quite sure why... (Google it and did everything possible and still no avail...)
3) Messaging app when i type the keyboard cover the messages, like the message doesn't auto move above the keyboard and when i scroll the keyboard goes away. ** minor issue but its frustrating...
4) I just noticed I can't access YouTube from both the apps and the browser. Does this have to do with the rom?
I agree, this phone needs to be marketed much more here; bit of a dark horse, if you ask me.
Your S3 claim: I would have to slightly disagree with you on that one. Most people I know are still rockin' the iPhone and/ or Blackberry (this is a dying breed, however), but the tides are slowly changing now, as people are starting to take notice of Android. I only know three people with S3s, one person with a Note 2, and another recently obtained a Nexus 4 (had his Blackberry for awhile).
Boot animation sound:
I had my phone on silent (well, vibrate) last night, but the sound played still upon rebooting(?). Will test further.
Play Store images:
At first I thought it was my internet connection messing up, but turns out this is not the case. The first Google result pointed me to this, which indicates that using SetDNS (and choosing an appropriate DNS server - I like Google's/ OpenDNS', personally) solves the problem. I'll try this over lunch time at work.
Messaging and keyboard issue:
Swiftkey is typically one of the first apps I install, so can't comment on this.
Youtube:
Haven't tried the Youtube app/ site yet. I'm thinking this MAY tie into our DNS issue.
Further impressions:
stock browser isn't vanilla based, and isn't hardware accelerated, so it's a tad choppy (forcing 2D acceleration doesn't seem to work, either)
stock browser has a neat feature whereby if you swipe from the right bezel going left, it'll reveal the tabs; pretty intuitive in that regard, IMO
I tried the DNS level 3 and that didn't work.
One question did you set external sd to main storage? It doesn't seem to save apps on it?
Sent from my HUAWEI U9510E using xda app-developers app
Aw boo.
And yeah, I have external SD as main. AFAIK, that setting is only for things such as pictures/ videos, and not for apps.
Apps will always default to the internal storage, which is where the App 2 SD program comes into play.
EDIT: Hmm, I wonder if LUV's version (option C, per this thread) is any better than B. Simon, have you tried this one as well?
Hmmm weird bc without setting it my pics and video already saves on external.
Can we not just flash a stock 4.1.2 and flash the radio? I'm guessing gps and camera won't work properly? I don't like the Huawei 4.1 to be honest :s I'm back to 4.0 haha just can't stand the setting menu.
By the way I'm just curious on how you guys got this phone? Through windmobo?
Sent from my HUAWEI U9510E using xda app-developers app
Hmm, maybe the camera app itself ignores the system settings, and defaults to external SD on its own...
I don't think flashing a stock 4.1.2 would be that simple, otherwise we wouldn't need to go through these loops (via Chinese ROMs) just to obtain JB. Hence, my anxiety for a CM10 release.
I myself am pondering flashing back to stock, but the touch responsiveness of JB would be hard to let go of. Granted, it's a bit of an improvement only, but still.
Might try LUV's ROM later tonight.
And yes, I got this through Wind (on a TAB, nonetheless). I don't think this phone is available anywhere else at the moment, as far as Canada is concerned?
Sighhh I miss flashing roms I do it so much it's like I'm addicted haha. I still got my GNex to mess with.
Have anyone compiled their own rom before from free sources?
I guess we can try to learn to do that and cook up a rom for this phone that would be cool.
I'm having an issue with wify on ics I cannot connect to my school secure wifi. I had all my credential set up but it won't even attempt when I press connect.... You guys experiencing this too?
By the way have you tried the DNS to fix the market? I read somewhere that the app doesn't seem to work on jb?
Sent from my HUAWEI U9510E using xda app-developers app
I only enjoy flashing when the ROMs bring about new, practical features, performance improvements aside. I always get a chuckle out of Apple fans who jump for joy whenever an update is released. My response? "Yeah, remember how you felt when Apple released that update? Now picture that feeling, but almost every day... welcome to Android."
I'd love to get into ROM compiling, but programming is anything but my forte. I'll leave it to the Linux-heads and the guys behind Cyanogenmod, SlimBean, etc., hehe.
Odd. My wifi worked perfectly fine on the stock ROM, connecting to my home router (WPA2 Personal).
I ran across someone that said that if you attempted to use SetDNS without root, that you could possibly hose your wifi. Considering we are rooted now, I haven't the idea as to why you can't connect to the school.
SetDNS set to Google's DNS didn't work, unfortunately. Might be a glitch between the app and the ROM itself, perhaps.
(My school uses 802.1xEAP. I know I set it correctly because my GNex connects fine.) ** solved
Yes I do rmb the days when I had the iPod touch 2g and I hated how things look soo boring and function so limited so modified the crap out of it through Cydia. They had pull down menu already many years ago in Cydia and apple didn't pick it up till recently lol.
Is Huawei working on 4.1 for global firmware? I hope they keep the stock lock screen and stock menu.
Can't wait for someone to release 4.1 AOSP!
By the way compiling shouldn't be too hard? There are many tutorial and program to auto compile I rmb I had a program like that few years ago...
Sent from my HUAWEI U9510E using xda app-developers app
Per this thread, it seems that we'll be getting JB officially very soon. Bit late IMO, but better late than never.
Bit surprised about what Telco wrote about the XL's reception though, as it's quite the contrast to what Howard found with his.
Battery life
Hi I just wondering if any of you on the 4.1 can compare the battery life with me. I think I read it somewhere that the 4.1 improves battery life significantly. Here are my results
4.0.4 ICS, Screen brightness on auto. On battery save mode most of the time
By the way anyone fixed the play store/ you tube issue?
12andy said:
Per this thread, it seems that we'll be getting JB officially very soon. Bit late IMO, but better late than never.
Bit surprised about what Telco wrote about the XL's reception though, as it's quite the contrast to what Howard found with his.
Click to expand...
Click to collapse
About the reception i have to say i agreed! My GNex never looses signal completely (just down to no bar but still barely connected) but the ascend drops to no service. At school too I noticed I get drop signals in some areas that i didnt notice before. Maybe that have to do with the battery saving mode? I will try putting on performance mode to test it out in those areas.
The way you grip I do notice some drop in signal. Probably the architecture and location of the antenna
nvana said:
By the way I'm just curious on how you guys got this phone? Through windmobo?
S
Click to expand...
Click to collapse
No problem to get the phone in my country. More than 10 different shops.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Current Events
Dodo released! This means this ROM is now extinct. Sorry! If links below fail, try this one!
OTA is in Beta. Will be included in CM 13 release once both are stable. OTA will be available before full-sized versions due to the testing process (updates are tested first).
SnapChat will not work without some help. This is entirely SnapChat's fault for trying to control your device. Please read this thread before flashing and how you can make it work. Or just open Xposed installer, install Snapprefs and reboot.
Introduction
Welcome to the fastest and most stable ROM for your OnePlus. This thread is mainly a support thread for Jgcaap's awesome work, allowing him to spend more time working on "M" and less time answering questions. His latest builds will be tested by me, hand selected for stability, and the best of the crop will be repackaged, enhanced, and placed here. If you are new to this ROM, check the screen shots for benchmark results and battery life screenshots. Be amazed, then download the ROM and be even more amazed! Smooth as glass and flows like water! As one person has said, "Disgustingly Fast!"
Please read this entire post! Check back often for updates. Also, current jgcaap users will get additional information and tips that can be useful. Check out all the links! And if you want to try some Bacon wrapped Marshmallow, click the bent arrow in the Announcement's line.
Wildlife
Each ROM will be named by an animal, starting at A for Aardvark. A picture of the animal will be placed here so you can see at a glance which release is current. The original jgcaap ROMs often have multiple releases in a single day, and every country has a different date format, so the animal names will allow us to represent specific "official" releases with memorable names.
Release (CM 12.1 - jgcaap 11/30): (click image to update)
Downloads | Other Stuff | Links
Features & Changes
The ROM gets repackaged so that new users don't have to go about tracking down which files they need and which order to flash things. The firmware is included and everything is set and ready to go. For legal reasons, just add your own GApps and go. This ROM currently has the following feature's prepackaged and already included with the ROM ...
SuperSU (pre roooted)
Xposed (special jgcaap version)
Moab Ad Blocker
--- ZooKeeper can configure this!
ColorOS Camera
--- with manual focus option
Viper (Audio Eargasm)
Dolby ATMOS! (Dodo+)
Send Reduced (send small pics)
CatLog (for bug reports)
Show On Lockscreen (wallpaper)
OmniSwitcher (optional)
Init.d Support (Badger+)
Governor: blu-active (Badger+)
Low call volume fix
OTA Support (coming soon!)
Support, Questions, Feature Requests and Bugs
Please report all bugs for CM12.1/Lollipop based Jgcaap ROMs to this thread. Even if you didn't download one of the Wildlife pre-packaged ROM sets! Feel free to ask questions. This thread will have the same warm inviting atmosphere that jgcaap's development thread has always had. Newb-friendly and all are welcome!
Getting Started
There will be two ROM images available. The update packages will be designed with a smaller download size with only the files that have actually been changed. The installer will not remove things you have added nor re-install programs you have removed. If you are already using a WildLife ROM, use the Update packages to upgrade. This does not apply to full versions. The full versions should be clean flashed.
The next post will have Step-by-Step instructions telling you exactly what you need to do and how to go about flashing your phone or upgrading. The post after that will have all the tips and tricks for maximum tweaker power. Finally, we'll have instructions on how to rescue your phone when something goes wrong.
Sponsored by Eddon Systems
Additional Downloads at Eddon Systems Download Page
XDA:DevDB Information
Wildlife Android, ROM for the OnePlus One
Contributors
uudruid74, jgcaap, purerawenergy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: INCLUDED
Source Code: Jgcaap's Github Repo
Based On: CyanogenMod 12.1
Version Information
Status: Stable
Current Stable Version: See Post
Stable Release Date: 2015-11-16
Created 2015-11-16
Last Updated 2015-12-11
Flashing WildLife
Flashing Instructions - Full ROM
Step 1 - Backup
If you don't have a backup program, you can grab a really fast and free one, Backup+. XDA Forum | My Mirror - Direct Download. Be sure you keep the APK on your Internal Storage so you can install it easily and restore the rest of your apps. Also, I strongly recommend you copy your internal storage (or at least the backup directory) onto a PC, a harddrive, a flash drive, or cloud storage such as Google Drive. Get it off your phone and make it safe.
Step 2 - Boot into Recovery
Even if your reboot menu doesn't have a Recovery option, you can always just hold down the Volume Down button when your phone boots and you're good. I recommend Philz Recovery from this XDA thread or you can download the exact ZIP I use.
Step 3 - Wipe Carefully
This step is what is known as a "clean flash". Do not perform this step if you are flashing an upgrade or addition. If this is the first time you've flashed this ROM, you want the full version and you want to do it cleanly. Failure to clean flash leads to odd problems. For example, Agent stopped reading my calendar, or my Camera plugins would start to disappear.
You do not want to do a Factory wipe or anything like that or you'll lose all your data. Do not format /data. Here's where it gets confusing. Many recovery systems treat /data and Internal Storage as if they were separate partitions, but they are not. Your internal storage is on the same partition as /data. If you are from Windows, image your /system is your C: drive, and /data (where your apps are at) and your internal storage are both on D:. Your recovery has a specific wipe designed to safely wipe /data without wiping out your internal storage by erase directories individually, yet automatically.
Philz makes this simple and direct. Select Wipe and Format Options, then select Clean to Install a New ROM. Confirm the wipe, and you are ready to go.
Step 4 - Flash the ZIP
This is pretty easy. Select the option to flash it, find it on your device, and away it goes. If you downloaded the file to your PC (or wiped your internal storage and now have no files on your phone), you can use the "sideload" option you see in the menu. Just plug in a USB cable and type: adb sideload Aardvark.zip This does require that you have adb drivers set up on your PC, but you needed that to unlock your bootloader, right? More tips like this in a later post!
Step 5 - Flash your Gapps
The most important part of Gapps is making sure its for Lollipop. The more up to date, the better. You should download the smallest GApps that fits your needs, just so you don't have to download so much. You can specifically control which Gapps are installed with a config file. Just drop the gapps-config.txt into the same directory as your gapps ZIP file. This file can even delete crufty Cyanogen apps that you don't need or want (you have better ones from Play store right?) and reduce bloat considerably.
About the Gapps Config | OpenGapps is the recommended Gapps package | Newer Sources for Gapps | My gapps-config.txt ... note: you might not want to use my config unless you want almost all your Cyanogen apps to go away. When the system comes up, you won't have a file manager to install Backup+. I install it with "adb install BackupPlus.apk" or if its on the phone, you can log in with adb shell and then install with pm install $PWD/BackupPlus.apk
TIP: If you have Chrome installed from Gapps, you can open it and type "file:///sdcard" in the URL window and then select your Backup+ or Titanium Backup APK to install it. Be sure you have "Install from unknown sources" turned on. Now you can restore your good File Manager (like FX File Manager mentioned in Post #5) from your Backup and don't need Cyanogen's!
NOTE: If you have trouble with OpenGapps, then you can try my stable mirror or SlimGapps (which is now recommended by jgcaap, but I've not tried it myself yet ... but expect it to be the new recommended after I run it through the paces).
Step 6 - Reboot your Phone
After flashing, the first time your phone comes up, its going to optimize itself and you should expect it to take awhile. Don't panic, and wait a few minutes. I refuse the CyanogenMod account (you already have a Google one, and Cyanogen doesn't offer anything extra and defintely do NOT send bug reports or analytics to Cyanogen!). I also go into Settings, About Phone, tap the Build Number like a mad monkey to turn on Developer options, and from there, I enable the Reboot Menu, Fast Boot, Cut the animations down to below 0.5, and turn on ADB since I'll be installing Backup+ over ADB.
Step 7 - Restore your Backup
Use your file manager (or ADB) to install your backup program and then restore the rest of the apps from your backup. I keep my Wifi off so that Google Play won't freak out and try upgrading stuff while its restoring. Do not use ROM Settings Backups to try to move settings from one ROM to another (thats what Update files are for). You can usually restore your Desktop with Backup+ by restoring the data for Trebuchet if you formerly used another Cyanogen release. The next reboot I go to Play Store and upgrade any apps that need it.
Step 8 - Final Config / Updates
I haven't found a perfect way to back up Trebuchet and my desktop ... but Backup+'s system backup tool (paid feature) can be used to restore the Trebuchet data, which gets everything but the widgets. If you use OmniSwitcher, just turn it on. If you use Xposed, it should already be working and active. If you don't use Xposed, jgcaap's version won't slow down your phone or cause glitches. However, if you really don't want it on your phone, you can flash this to deinstall it and can reinstall it without flashing the whole ROM by flashing this file.
MaxxAudio is gone ... use Viper. Set it to Super Audio Quality and reboot when it says to (Aardvark only, no reboot required for Badger and above). More about Viper here. I strongly recommend reading as there are a lot of optional add-ons (convolvers and such for emulating other tones and systems) but many of these will use significant battery power. I don't even use it for the built-in speaker. You can control it per output device, and have different profiles, such as if you have multiple pairs of headphones or different USB Audio devices.
Please Donate to the developers when you use an app. It is only through your support that you get to use high quality apps. This ROM has ads blocked, so developers of free apps will go poor and hungry since they won't be getting any revenue from your ad clicks!
Flashing Instructions - Updates
An update is a slimmed down version without any apps (unless they've been updated), no firmware, no media files, etc. And it avoids flashing over files you may have changed or deinstalled, like the hosts file or various bundled apps. It doesn't touch your settings, you don't need to wipe anything, and it just upgrades in-place. All you need to do is Steps 2 and 4 and 6!! Updates are clearly labelled. Never wipe your phone when installing an update! No OTA yet.
Tweaking
Tweaking, Trimming and Theming
Kernel
There is a UKM for jgcaap's kernel which is in the download area. You'll need Synapse from Play store to use it. I don't recommend tweaking the kernel, but if you want the option it is there. Just download the ZIP, flash it in recovery, and you can start tweaking some kernel parameters! Personally, I use 3C Android Tuner (see below) because it can tune more than just the kernel, but you might find something UKM does that 3C doesn't. As as Badger, you can use the init.d script option for restoring settings imposed by kernel tweakers.,
Governor
Your governor controlls when your CPU is at full blast, when it throttles down, and how quickly it changes and by how much. This will affect battery and performance (and "lag") considerably. As of Badger, the default CPU governor is "blu_active". You won't need to ever change to "Performance" mode to squeeze out more power, its runs even more fluid than before, and battery life is as good as ever. There are a couple ways to select the governor. The one I use is 3C (below). The only source of lag is memory. If you run out and Android has to swap stuff out, there will be a noticeable delay. If you rarely get lag, but get it rather severely, I bet its when you have 20 apps open and a million installed with their own background services and content providers! Suddenly the OOM (Out Of Memory) killer attacks and your phone stops for a second or two. I'm testing a possible solution, but everyone's phone is different.
CPU Temp
How hot does your CPU get? If you run Cardboard like me, you might be concerned. If you have to switch to an app to find out, then your CPU will have already cooled by the time you see the temp. This CPUTemp App displays an overlay anywhere you want that will show you your exact temperature. It can also save the data and give you in-depth graphs of CPU speed, load, and temperature. Alternately, you can just use this Xposed module to always show the CPU temperature in your status bar. (WARNING: I've not tested this Xposed module myself).
Xposed
Wildlife already has Xposed installed. If you have heard of requirements that your ROM must be deodexed or odex or and that you will have compatibility issues or slowdown, the current news is that the latest Xposed works on odexed ROMs and jgcaap has personally blessed some modifications to increase speed and compatibility with this ROM, and final result is packed into Wildlife. However, until you install some Xposed modules, it lies dormant. Fire up the Xposed Installer and you can start searching for tools to tweak how your phone looks, how it acts, how it sounds, and tweak some more battery life. Once you install a module, activate it, and then reboot.
Please be aware that not all Xposed modules are compatible with Lollipop and not all modules are created equal. I have heard mixed reports on GravityBox in particular. If for some reason your phone gets horribly confused and won't boot because of some Xposed module you have installed, or if you just hate the idea of having Xposed and want it gone. There is a solution! Flash this Xposed Uninstaller and if you flash this and want Xposed to come back, just Flash Jgcaap's modified v75 Xposed framework.
Ones I use are the 3C Toolbox helper, Clarity (makes your contacts in better definition), No Device Check (privacy), RootCloak (hides root), Smart Network (auto switches between 3G and LTE to conserve battery).
3C ToolBox
If you like tweaking, this toolbox has a little bit of everything. You can view logs, including last kernel boot log (the one that ran before you crashed), open a terminal, set a firewall, change CPU and GPU governors, disable services, remove programs from the start-up list, change network congestion control ... the list goes on and on!
Here is the XDA thread (with download links) for this tweaker's toolbox.
Battery Extensions
The first step to checking battery problems is Wakelock Detector and Better Battery Stats. These tools will tell you where your juice is going. If an app is holding a wakelock, ditch the app or alert the developer. Once you see what is chewing the most battery you can launch an assault on it with these tools:
Xposed Modules - Again, I'm going to defer to an expert source, @V7 's Extreme Battery Life Thread for all the goodies on PowerNap, Greenify, Amplify, and all the others that you've heard about.
Underclocking - I simply do NOT recommend this. Why? Well I checked Better Battery Stats! And my CPU had only been at full speed for 6% of the time. The next speed was under 2Ghz. So, is it worth slowing down your phone by 20% in order to achieve an overall savings of about 1.2% battery? The reason for this is that your system has what's called a governor that predicts how much CPU you need at any given moment and adjusts accordingly. This means you only use max CPU when you need it! If you underclock, then you are slowing down your phone when you need it most. You might even waste more battery because you'll be keeping your screen on longer waiting for your phone to finish!
Undervolting - I don't like this idea either. Basically, the voltage is how much strength it takes to open the transistor gates, like little doors. When your CPU gets busy, the voltage can fluctuate by small amounts, and if you undervolt your CPU, you can occasionally get a gate that doesn't open, and your get a CPU doing really crazy things and some app with crash or your whole system will crash. Generally, higher speeds require higher voltage to keep your CPU stable, and less voltage at lower speeds. Imagine trying to open and shut a door really fast ... you'll need more force than just shutting the door gently.
Can I get 9hrs SOT? - Sure! See the screen shot, but here's the secret. WASTE battery power! If you have a flip-case, remove it. Take your screen timer and set it REALLY high and don't turn off your screen. Let it BURN! This will ensure that your screen is on for a really long time. Cheating? Well, yes and no. The point is that someone who is chatting on their phone over Wifi and rarely touches it, but leave the screen on while doing so will get great SOT. The guy streaming Bluetooth audio all day long and has their phone tethered to use LTE internet with a low signal will waste tons of battery and may not have the screen on at all. The 9hr screen on time was done while doing all the above, plus some web browsing using ....
Ultimate Browser - This browser is said to use less battery than Chrome and others. You can check it out and see for yourself on The Ultimate Browser XDA thread.
Themes
Many people ask about the themes pictured in the screenshots. This is the Deep Darkness Overhauled Theme but with the thinner fonts from Cosmos CM12. Just select which parts of each theme you like before clicking the Update button.
I'm now using an Add-On package for this theme that gives icons that aren't so dark. It has a cool font, too, but I don't know if I like the Cosmos or Deep Darkness Add-On better. I'm also using a compromise between the 400 DPI (real) and 480 DPI (stock) of 440 DPI. This still gives me 5 icons wide on the home screens without throwing off apps that expect stock DPI (much).
Rescuing Your OnePlus From Disaster
Rescuing Your OnePlus From Disaster
I sure hope you never need any of this information! The following links are from Heisenberg's OnePlus One thread
Device Recovery/Unbrick Tools
[TOOL] One-Click Backup & Restore EFS on OnePlus One
[TOOL] OnePlusRecovery Tool | Restore Stock (CM11S) | Fix Bricks | ETC
[TOOL] OnePlus One Return To Stock - Automated!
[GUIDE] [UNBRICK] Unbrick Oneplus One
I originally intended to post a step-by-step, but instead I'll defer to existing/tested sources. Heisenberg's thread has tons of useful information and is well worth checking out.
More Info
Link Database
Someone has an awesome thread listing all the links you could ever ask for, so I'll defer to those that are already maintaining this. Here you are ...
http://forum.xda-developers.com/showthread.php?t=2843675
Recommended Apps
Please note that these are some of the best of the best, and most of them are not free!
Email - [email protected] Mail This is a fork of K-9, which is the Android Mutt (from Dr Who) .. mutt being a classic Unix mail program. I love Dr Who, but [email protected] was such a big improvement, I had to go with it. If you need full folder support, multiple accounts, and support for email cryptographic signing and encryption, multiple identities, and html editing of email and html signatures!
Music Player - PowerAmp - this is by the best music player I've used, bar none. If you don't want it messing with your custom lockscreen wallpaper, you can tell it not to, or add a whole second/custom lockscreen over the original. It has its own EQ, but I don't need it with Viper. To make PowerAmp compatible with Viper, simply turn off the direct volume control. You can use Xposed to add more volume steps if you like the extra control that PowerAmp's default has.
Video Player - VLC Video Lan Client Plays everything, does everything, streams videos, and has remote control apps to connect to other VLCs anywhere on your network.
QuickPic - QuickPic is a replacement for the stock Cyanogen Gallery. It works and acts much the same only its much much faster. Another good choice is Piktures, but new users may find it a bit more complicated, and it doesn't seem to be nearly as fast.
Agent - While much of what Agent does can be duplicated with other tools, the ease of use and flexibility of this tool can't be beat. It monitors your calendar for meetings and silences your phone, knows when you are driving and responds to your texts (and/or reads them to you), detects when your sleeping and makes your phone quiet (even if you sleep at different times). Has a battery saver mode, and can even remember where you parked. The Meeting agent works best if your calendar supports the "Busy" flag, which Google removed about a year ago, so ...
Today Calendar - The Today Calendar is just a really beautiful app and has some nice widgets (although I just use cLock from Cyanogen to show my calendar and make appointments via Voice commands, so I don't see Today much, I still bought it). It has the Busy flag and all sorts of features. If you want one a little less flashy (and free), try Boxer Calendar.
File Manager - The FX File Manager is by far the greatest file manager. It has everything built in, including SMB to network with Windows and SFTP to network with any machines running SSH. App Management, Media Refresh, and nice clean material design! Bloat free!
FXR Wifi Repair - Get this app and install it NOW! You will thank me the day you end up needing it!
Project Toolbar
For those on Tapatalk that don't get the toolbar, here it is ...
Downloads
ScreenShots
Reviews
Feature Requests
Bug Reports
.
I'm running 12.1-20151030 deodexed version. Could you provide me links to proper Xposed installer? Or is it ok to flash that one package with all that installed?
Sent from my A0001 using XDA Free mobile app
Tyga187 said:
I'm running 12.1-20151030 deodexed version. Could you provide me links to proper Xposed installer and Viper? Or is it ok to flash that one package with all that installed?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Don't know if 10/30 needs deodex or not but if its before jgcaaps hacks you'll need the older Xposed. I have it and Ill upload it for you to my site (Eddon Systems Download Page ... link in first post). Viper is already there (look for LolliViper).
If you don't mind taking the time to do a clean flash, Aardvark is based on the 11/08 build with the Apple code. All works out of the box Dirty flash possible, but can lead to weird problems.
I'll upload Xposed v75 right now
More about me at https://eddon.systems
Ok so it is possible to run odexed version and have Xposed working? I've heard that I need deodexed version for exposed that's why I'm on 20151030.
Thanks a lot for fast response!
Sent from my A0001 using XDA Free mobile app
Deodex and Xposed
The newer builds are made in such a way that you can use them with Odex builds without problems. We even have a special "Hacked" version of Xposed that prevents the possible slowdown issues and bypassing jgcaap's ART improvements.
So yes, use Odex and new builds and preferably the "Hacked ZIP" for the framework, although normal v75 still works. Or flash Aardvark. I've got maybe a dozen Xposed modules active.
The reason you don't see newer Deodex is because they aren't needed anymore
uudruid74 said:
The newer builds are made in such a way that you can use them with Odex builds without problems. We even have a special "Hacked" version of Xposed that prevents the possible slowdown issues and bypassing jgcaap's ART improvements.
So yes, use Odex and new builds and preferably the "Hacked ZIP" for the framework, although normal v75 still works. Or flash Aardvark. I've got maybe a dozen Xposed modules active.
The reason you don't see newer Deodex is because they aren't needed anymore
Click to expand...
Click to collapse
Which build has Apple code ? Normal odexed build , deodexed or bionic build ?
lokesh.3440 said:
Which build has Apple code ? Normal odexed build , deodexed or bionic build ?
Click to expand...
Click to collapse
It varies based on date and jgcaap's whim. The 11/08 builds do. I don't think any deodex builds do because he stopped making those before the Apple assembler code experiments.
Since 11/08 has it, Aardvark has it.
Bionic isn't a ROM build, its the Android low level C library to which the Apple code is being added.
More about me at https://eddon.systems
uudruid74 said:
It varies based on date and jgcaap's whim. The 11/08 builds do. I don't think any deodex builds do because he stopped making those before the Apple assembler code experiments.
Since 11/08 has it, Aardvark has it.
Bionic isn't a ROM build, its the Android low level C library to which the Apple code is being added.
More about me at https://eddon.systems
Click to expand...
Click to collapse
I m downloading latest build now.
Good job Evan. This will definitely help Jorge and the Marshmallow project. Thanks in advance brother.. See you on the testing ground.
Tom 2.0
Purerawenergy said:
Good job Evan. This will definitely help Jorge and the Marshmallow project. Thanks in advance brother.. See you on the testing ground.
Tom 2.0
Click to expand...
Click to collapse
I'm going to be stealing your post you made in the other thread about battery tweaks ... Greenify, Amplify, PowerNap and all that. It will go in the tweaks post. Let me know if that info is changed and if you can remember the date or post number for when I go digging.
More about me at https://eddon.systems
uudruid74 said:
I'm going to be stealing your post you made in the other thread about battery tweaks ... Greenify, Amplify, PowerNap and all that. It will go in the tweaks post. Let me know if that info is changed and if you can remember the date or post number for when I go digging.
More about me at https://eddon.systems
Click to expand...
Click to collapse
You may want to link my buddy @v7 in there somewhere if you want. He's the wake lock master Bro. And his helpfulness is awe inspiring.
Tom 2.0
---------- Post added at 03:36 PM ---------- Previous post was at 02:50 PM ----------
Oh and it's not stealing if you ask someone. Haha
Tom 2.0
Purerawenergy said:
You may want to link my buddy @v7 in there somewhere if you want. He's the wake lock master Bro. And his helpfulness is awe inspiring.
Tom 2.0
---------- Post added at 03:36 PM ---------- Previous post was at 02:50 PM ----------
Oh and it's not stealing if you ask someone. Haha
Tom 2.0
Click to expand...
Click to collapse
Actually, I put your name in as a contributor (and obviously @jgcaap) which gives you a lot more access. That way, if I'm hit by a bus tomorrow, other people can step in (its the admin in me). You might be able to edit the project page and initial reserved posts yourself.
My routed here is getting old so I'm doing a reflash and adding a captive portal to disconnect people when there isn't a human body using it. I need to cut down on everyone's bandwidth usage. So ... gonna be a busy night.
More about me at https://eddon.systems
uudruid74 said:
Flashing Instructions - Full ROM
If you don't have a backup program, you can grab a really fast and free one, Backup+. XDA Forum | My Mirror - Direct Download.
Click to expand...
Click to collapse
Hi,thanks for this thread. I've downloaded aardvark but for the backup+ download from : https://eddon.systems/Download/Backup+_Beta_1_R2.apk I get a 403 forbidden.
Verstuurd vanaf mijn A0001 met Tapatalk
I am going to download your rom and test it in a couple of days
Wysłane z mojego A0001 przy użyciu Tapatalka
Well this came around at a perfect time! I haven't been actively flashing my phone much this year and my current ROM is from July 5th lol. So I'm not really new, but could use something pre made like this. Reading, backing up, and downloading this afternoon, then flash later tonight. Thanks for putting this up.
Is the rom ok to flash on system/data/cache on f2fs ?
Hello!
Before proceeding. It is absolutely necessary for you to be on a stable TWRP build (currently, RC8, 3.0.2-0, and 3.0.2-1). Also, you must have already have had decrypted your ENTIRE phone. If your phone bootloops into TWRP, you probably didn't decrypt, and/or didn't flash no-verity properly, or it could also be that you are on an old TWRP build.
Here we have the base NRD90M ROM from LG.
I have added a few mods to it.
FEATURES
**Multi-user working!
**This ROM is deODEXd
**Has init.d support
**Modified build.prop for better performance and hardware utility
**Removed bloatware (including that HORRID Lookout)
**Force encrypt disabled
**New kernel built-in.
**Based off 3.18.31 from @jcadduono source (thanks so much)!
**Added in the blu_active governor and set as default (via post_boot)
**No-op scheduler is default, and recommended
**Updated build.prop for better Hotspot support.
**More build.prop tweaks
**init.d support baked into the kernel
**Battery life should be noticeably improved, with no loss of performance (maybe even a bit faster).
**No need to wipe anything. System and caches are automatically wiped.
**Updated to SuperSU 2.78 SR4
**Updated boot and shutdown animation to the Android 7 default (thanks @freeza )
**More bloat removed
** Now includes more performance tweaks.
**Full Busybox support included!
**Fixed updater-script and binary
**Removed Sony Bravia/Xperia Engine
**Zen_Decision HotPlug enabled by default. (This will improve battery life, especially when your screen is off)
**TCP Congestion controller set to Westwood+ (improved download speeds)
**KCAL Color Control! Plus the Color Control app! Thanks to @savoca for KCAL and the app! Thanks to @freeza for the updated KCAL.c source file
**IO Stats for scheduler turned off
**IO Read ahead set to 2048kb
**Added init.d scripts to optimize your phone, and keep it fast over time.
**VPN is fixed!
**Gallery locked files are fixed!
**Bluetooth and FM should be fixed!
**No hotspot or ADB debug issues!
**More things I can't remember.
Kernel built on the Linaro 6.1.1 x86_x64 toolchain
Latest: v5.1 combined with v5.5
v5.5 is intended only for people already on v5.1. It will not wipe anything, and your phone will not need to do its initial setup. 5.5 is an update only! You must first flash 5.1, then 5.5. You can tell TWRP to flash files in sequence, so it's no hassle. ZIP no longer checks your device, so be sure that you are flashing for the model the sticker on the phone says that it is.
Here are the changes for v5.5:
Removed boot state verification. This allows your device to pass CTS on SafetyNet. That means that you might be able to use a root hide program, or maybe full unroot within SuperSU, and perhaps apps like Android Pay and Pokemon GO will work. They will never work if root is detected, no matter what.
Used more independent defconfig lines, hopefully static will go away... I highly doubt it, might even cause a no-boot issue. If it does, just tell me and I'll fix it up.
The main changes here are even more battery saving
**some voltage control preparations (still not active)
**added a DNS resolver module to maybe help some people with hotspot.
**Bluetooth and FM should work even better than before (hopefully not worse lol)
** C-states are made aware in the kernel, so sleeping should be more effective, while waking up should be more snappy.
More things. Do it!
Here are the changes for v5:
**ViPER4Android is preinstalled
**Kernel updates to latest sources (no changes other than updates)
**Included Titanium Backup pre-installed. I highly recommend getting the license, this program rocks, and never has ads. With a license you can do batch functions, and theres more features.
**Included Kernel Adiutor to prepare future kernel updates (CPU/GPU under+over clocking later on). You can also use this to tweak I/O settings, governor, screen color). Everything should run pretty good as it is, but what I do, is set read_head in I/O to 2048, and disable I/O Stats. I also set it on boot. I do not recommend modifying any CPU or GPU frequencies since there are no changes in the kernel to allow for that.
**Updated to latest Super SU
If the ROM won't flash because it says you have the wrong device
This is likely due to the conversion thing you guys had to do to root. I don't have the AT&T device and I don't know about that conversion thing. To bypass it, open the ZIP, go into META-INF/com/google/android and delete only the file called updater-script. Replaced it with this one
No need to wipe anything. If you are on stock ROM, ODEXd or deODEXd, or any other NRD90M ROM, you don't need to wipe, the ZIP will take care of everything for you. /data will not be wiped, so all your old apps and settings will be there. Internal storage is of course untouched.
For anyone interested in my color options, they are:
My new settings are:
All 3 colors at 256
Saturation 68
Value 129
Contrast 127
Know that I love deep, rich, vibrant colors. Also, changing colors will not change effects on pictures taken! This is post-processing. Your phone's screen is what changes, not the files that you create.
Note: Adding saturation (vibrance) will always give some sort of color banding -especially since KCAL is post-processing. You can minimize color banding by ever-so-slightly reducing gamma (read as "Value" in the Color Control app), and by ever-so-slightly fine-tuning Contrast. The value changes would be minimal, and the color banding will only be reduced ever-so-slightly, but this is just how it is. Nonetheless, the device looks friggin amazing with the color options set.
Having issues? Read below.
I need you guys to hear me out on this...
I do not have this phone, I cannot do any sort of testing, nor do I keep up with your rooting method.
That said, I cannot fix things that were broken due to the bootloader (such as Static Boot), so if WiFi calling did not work for you after flashing the custom bootloader, please don't ask if it is fixed... I do not know how to fix it. When/if it is fixed, I will let you guys know that it is fixed and who to thank for said fix.
Additionally, I need you to tell me things that do not work. I might not be able to get to all messages, or questions, so if you see that I did not reply, ask again and again until I do... I will reply and answer (obviously don't spam). Be sure to quote me, mention me, or message me. I do not check-in with these threads, just the H918 thread. If you do not send me a notice, I will not know that my attention is needed.
What issues that are ROM-related, not user-related can you report? You will know it is user-related if you modified anything in the phone/ROM.
If you flashed a different kernel, I cannot help you; flash back to the NSS kernel, and re-test.
If you are unsure about an issue, do a clean flash (in TWRP: Wipe-->Advanced-->select Dalvik, System, Data, and Cache (DO NOT SELECT INTERNAL STORAGE OR SDCARD)-->Swipe to wipe-->Install ROM-->boot phone, do not change or install anything. Retry your issue, if it is fixed, great. If it persists, go into your SD Card, and Internal Storage, remove the folders called "Android" and ".android_secure", reboot and try again. Still doesn't work? Mention me and post it here.
Remember, you can backup your USER apps in Titanium Backup (do NOT backup system apps, or restore system apps/system data).
You can also backup your existing setup and apps in TWRP so you can flash back to your original setup. This is good if you did a clean flash, and your problem is still there, you can restore your backup and be like nothing was changed.
Thanks @zhuhang for V4A!
Major thanks to @Chainfire for creating SuperSU
Major thanks to @jcadduono for the root exploit, AND for the TWRP image(s), AND for inspiring me to learn to do it. Also, he supplied the stock System.img, boot.img, and sources for a custom kernel!/RealMVP
Viper4Android is included! To enable, run the app, and configure how you please!
More to come (as I learn to do it)
Please make any requests. If it is not too difficult, I will learn how to, and add it to the MODDED ROM!
Debloat list
Removed from /system/
system/app/CloudPrint*
system/app/Drive*
system/app/DriveActivator*
system/app/EditorsDocs*
system/app/Gmail2*
system/app/Hangouts*
system/app/Music2*
system/app/talkback*
system/app/Videos*
system/app/YouTube*
system/etc/recovery-resource.dat*
system/priv-app/LGEmail*
system/priv-app/LGTasksProvider*
system/recovery-from-boot.p*
system/app/AndroidPay*
system/priv-app/facebook-installer*
system/priv-app/GoogleFeedback*
system/app/LGAccount*
system/app/LGAirDrive*
system/priv-app/LGAirDriveSetting*
system/priv-app/LGBackup*
system/app/LGBackupLauncher*
system/priv-app/LGExchange*
system/app/LGFOTA*
system/app/LGMusicShare*
system/priv-app/LGPartnerBookmarksProvider*
system/app/LGSpringCleaning*
system/priv-app/Lookout*
system/priv-app/TMO_MyAccount*
system/priv-app/LGApplicationManager*
system/vendor/overlay/com.lge.friendsmanager*
system/vendor/app/facebook-appmanager*
system/priv-app/LGPCSuiteService*
system/priv-app/PromoHelper*
system/priv-app/LGQHelp*
system/priv-app/LGQHelpService*
system/priv-app/NameID*
system/priv-app/LGUpdateCenter*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.android.providers.partnerbookmarks*
system/vendor/overlay/com.lge.appbox.client*
system/vendor/overlay/com.lge.exchange*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.lge.bnr*
system/etc/amzn.mshop.properties
system/vendor/overlay/com.lge.lgworld*
system/vendor/overlay/com.lge.mlt*
system/vendor/overlay/com.lge.lifetracker*
system/priv-app/AdaptClient*
system/priv-app/ATT_ProtectPlus*
system/priv-app/ATT_DeviceHelp*
system/priv-app/ATT_Lookout*
system/priv-app/ATT_SmartLimits*
Source for kernel is at (need to update)https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Thanks to @jcadduono for the amazing original source he made for us ( you can find it here : https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Everything is still working great! Thanks again @Tilde88. Those color settings are awesome, too. Much better than stock!
Glad to see this! Trying now..
UPDATE: Runs pretty smooth. Thanks again!
Yeah it worked perfectly now after replacing the updater-script (correctly). Thanks for doing this! My only request is just on adding the advanced power menu options such as reboot to recovery/bootloader Other than that - its perfect.
Twisted
twistedvip said:
Yeah it worked perfectly now after replacing the updater-script (correctly). Thanks for doing this! My only request is just on adding the advanced power menu options such as reboot to recovery/bootloader Other than that - its perfect.
Twisted
Click to expand...
Click to collapse
I second this! Advanced power menu with recovery/bootloader reboot would be great. I use ROM Toolbox Pro to boot into recovery as it is now.
Also, would like to put GApps Pico with the ability to add any extra Google features as necessary. I pretty much just use the play store and some services. I like minimal Google services and apps on my phone. For example, I use Waze instead of Google Maps, and I use Gmail, but not the app. I use a different email app but I cannot delete Maps or Gmail since they are system apps, just disable them and their services. I don't use OK Google, Google Now, Hangouts, etc... There are a lot more examples like this.
nikktrikk said:
I second this! Advanced power menu with recovery/bootloader reboot would be great. I use ROM Toolbox Pro to boot into recovery as it is now.
Also, would like to put GApps Pico with the ability to add any extra Google features as necessary. I pretty much just use the play store and some services. I like minimal Google services and apps on my phone. For example, I use Waze instead of Google Maps, and I use Gmail, but not the app. I use a different email app but I cannot delete Maps or Gmail since they are system apps, just disable them and their services. I don't use OK Google, Google Now, Hangouts, etc... There are a lot more examples like this.
Click to expand...
Click to collapse
You can delete system apps by using a program such as Titanium Backup. You can also backup your apps, and restore them on other ROMs. Don't backup system apps, just user apps.
I recommend the Pro version of Titanium; I bought it years ago, and still use it today. One of, if not the actual best, backup/restore program.
With pro you can do batch files, instead of 1by1. Also good for games to save their current state.
Tilde88 said:
You can delete system apps by using a program such as Titanium Backup. You can also backup your apps, and restore them on other ROMs. Don't backup system apps, just user apps.
I recommend the Pro version of Titanium; I bought it years ago, and still use it today. One of, if not the actual best, backup/restore program.
With pro you can do batch files, instead of 1by1. Also good for games to save their current state.
Click to expand...
Click to collapse
Titanium Backup is great! I have the pro version as well and use it constantly. I guess I'm not really concerned with the apps taking up space, rather just starting with the bare minimum of necessary things and adding what is needed afterward. But I usually freeze the apps just to avoid any possible issues with deleting. Another app that is just as great is ROM Toolbox Pro. Their App Manager and Auto Start Manager have advanced freeze functions that show you every single activity, receiver, and service attached to each app and gives you full functionality over them.
@nikktrikk @twistedvip or anyone else that wants to test.
@me2151 has given me a new defconfig for the kernel which might fix the static boot thing. Can anyone try it out for me please? It can be found here. Let me know how it goes. Thanks.
Tilde88 said:
@nikktrikk @twistedvip or anyone else that wants to test.
@me2151 has given me a new defconfig for the kernel which might fix the static boot thing. Can anyone try it out for me please? It can be found here. Let me know how it goes. Thanks.
Click to expand...
Click to collapse
Just flashed on my H910. Unfortunately, it still gave me the static screen upon reboot.
EDIT: It also seems to have made the phone very laggy compared to your original custom ROM.
Twisted
:/
twistedvip said:
Just flashed on my H910. Unfortunately, it still gave me the static screen upon reboot.
EDIT: It also seems to have made the phone very laggy compared to your original custom ROM.
Twisted
Click to expand...
Click to collapse
You can flash the boot.img from the ROM you already have downloaded. Just extract it out of the .ZIP, go to twrp, and flash the image as Boot
Tilde88 said:
You can flash the boot.img from the ROM you already have downloaded. Just extract it out of the .ZIP, go to twrp, and flash the image as Boot
Click to expand...
Click to collapse
Thanks, I just flashed back to your original custom kernel. Let me know if there's anything else y'all might come up with and want me to test out. Always willing to help out.
Twisted
Tilde88 said:
You can flash the boot.img from the ROM you already have downloaded. Just extract it out of the .ZIP, go to twrp, and flash the image as Boot
Click to expand...
Click to collapse
Everything is still running great. Much better battery life than stock! Just wanted to let you know, the only thing I have found that is missing is the Screen Capture feature. On the stock AT&T ROM, it is included in the pull down menu from the top, but it is not here at all in the custom ROM. If you navigate to Settings>Display>Home touch buttons>Button combinations, you can actually see the capture icon used as an example in the help section in the bottom half of the screen showing how to rearrange the buttons. The center button shows the capture button icon, but that button is not an available button to choose from when actually rearranging the Home touch buttons.
nikktrikk said:
Everything is still running great. Much better battery life than stock! Just wanted to let you know, the only thing I have found that is missing is the Screen Capture feature. On the stock AT&T ROM, it is included in the pull down menu from the top, but it is not here at all in the custom ROM. If you navigate to Settings>Display>Home touch buttons>Button combinations, you can actually see the capture icon used as an example in the help section in the bottom half of the screen showing how to rearrange the buttons. The center button shows the capture button icon, but that button is not an available button to choose from when actually rearranging the Home touch buttons.
Click to expand...
Click to collapse
Screen capture can be done by pressing Vol Down and Power at the same time in any screen.
*click*
Tilde88 said:
Screen capture can be done by pressing Vol Down and Power at the same time in any screen.
*click*
Click to expand...
Click to collapse
I have no problem doing a screen capture, I just wanted to let you know for the sake of knowing that the capture button icon is not included. Just so you have a comprehensive list of features no matter how minor they might be
Tilde88 said:
Screen capture can be done by pressing Vol Down and Power at the same time in any screen.
*click*
Click to expand...
Click to collapse
Its also on the second screen and is very handy and much faster. I know for me my case is of some crap rubber amd hard to hit both at the same time
Got the error that I'm not a 910. Tried swapping the update script to bypass the check, but now get an error that the update binary is missing while trying to flash it. Went to check and it is still the in the zip however. Did I miss something obvious?
Sent from my Pixel using Tapatalk
streetpounder said:
Got the error that I'm not a 910. Tried swapping the update script to bypass the check, but now get an error that the update binary is missing while trying to flash it. Went to check and it is still the in the zip however. Did I miss something obvious?
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
Sounds like you broke the ZIP. Don't modify it on your phone. copy the ZIP to your PC (don't open it from internal storage). Well, since it's broken now, download it again. When it's done downloading, open the ZIP on your PC, remove only the updater-script file, and once you have only the update-binary, re-add the updater-script.
I made a copy before I modded it. I'll try your approach and give it another go. Thanks!
Sent from my Pixel using Tapatalk
Still getting bluetooth shutting off randomly.
I flashed this using no wipe, as in instructions...on Dirty Santa AT&T rooted phone. Bluetooth STILL is completely annoying and disconnects whenever it feels like it. Even Bluetooth Auto Connect and Bluetooth Keep Alive are of no use as fixes. Any ideas??? Should I wipe and just flash your rom to clear up any bugs??
[EDIT] I JUST WIPED AND FLASHED...WILL POST RESULTS!!!!!
Thanks for your awesome work and thank you for your time!!!!
STANDARD DISCLAIMER: I am not responsible for any damages caused to your phone. Use Audo_Debloat and or FAQ & Troubleshooting guide at your own risk there is no warranty or guarantee.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the Lemon Drop Rom, for the Lgv20...
Auto_Debloat is a twrp flashable file I created, it's very unique in that you flash in twrp after you have already flashed Stock Oreo v8.0, kernel, magisk ect. This will transform Stock Oreo 8.0 into The Lemon Drop Rom. Auto_Debloat mods the build.prop file and updates the GPU drivers and tweaks. I love music, Lemon Drop was designed with music in mind, by forcing true 24 bit audio, at 44.1 kHz and System wide Quad DAC support. You will need to install apps like the alarm clock and weather. Most all LG apps are still there and some Google apps, like Chrome and the Play Store. You can always DeGoogle, at any time or keep Google Play Services installed. The idea is to customize Lemon Drop, to fit your needs.
Please read Questions, before rooting or flashing Auto_Debloat.
What works?
-Google Play Store
-Google Assistant
-Audio (input all three mics, & output)
-Display (with image retention fix & tweaked KCAL settings for optimal color)
-Bluetooth
-FM works on (H910) mod for VS995 & US996 link
-IR Remote
-LGMusic Player (for H910)
-Second screen
-usb
-Media playback
-fast charging
-Hardware buttons
-Camera (Camera improvement tweaks)
-GPS (USA gps fix by default & other countries optional) link
-Fingerprint
-DAC (24_BIT_Deep_Buffers_Enabler v4.2 force true 24 bit audio at 44.1 kHz) & (System wide Quad DAC support. V6.2)
-Radio (VoLTE & Wifi Calling only tested on H910 with AT&T)
-Wifi (dual channel bonding on 2.4GHz + speed tweaks)
-Thermal Throttling (70c default max temp) link
-Video output via hdmi
-DRM Widevine L1
What does not work?
-Miracast (removed due to security concerns)
My other xda pages
Best Apps, Games, Emulators for android & mods/tweaks for the Lgv20
Twrp Mods not included in Auto_Debloat
This mod has to be flashed, after you have already setup your phone.
Speed up WIFI / LTE By enabling CRDA on Android aka wifi country code (root only)
Magisk Module extra add-on Mods are not included in Auto_Debloat.
Disable find my device administrator account. Only if Google is installed.
Disable lock screen service administrator account. Only if Google is installed.
Force Doze Mode Force your phone into doze mode to save battery. (root only) With Google or without, like LineageOS or a DeGoogled phone.
Thermal Engine mod for Lgv20 Stock Oreo/Nougat (root only) Lemon Drop default is 70c you can flash 80c or 60c if you want.
Change Log Notes:
New v9.82 & v8.82
Increased the Zram size to 2.5 gigabytes. Added some extra Zram tweaks that may speed up the phone.
New v9.81 & v8.81
Auto_Debloat v9.81 updated to latest working version of Magisk v24.3. Also on v8.81 updated Auto_Debloat script.
New v9.80 & v8.80
Updated Auto_Debloat script also on v8.80 I removed the DT Ignite on the H990DS roms.
New v9.79 & V8.79
Updated Auto_Debloat script also on v8.79 I removed DT Ignite (aka) Mobile Services Manager on the VS995 Roms and US996 Roms, it's a bloatware app that installs other apps on your phone. link
New v9.78 & v8.78
Updated to 24_BIT_Deep_Buffers_Enabler_v4.2_Lgv20_Oreo
new sound improvement tweaks.
New v9.77 & v8.77
Fixed the hide boot warning message on the H910. Also update the Auto_Debloat script.
New v9.76 & v8.76
Updated the Auto_Debloat script, made it a little faster when flashing.
New v9.75 & v8.75
Hide boot warning message on the H910 Auto_Debloat v9.75. Cleaned up the Auto_Debloat script a little bit.
New v9.74 & v8.74
Fixed the internet speed Mod tweak in WCNSS_qcom_cfg.ini
Added gEnablePhyAgcListenMode=7
On this version I found the fix for the slow wifi and LTE. Dual bonding is enabled on the 2.4GHz band.
New v9.73 & v8.73
Added a new internet speed fix in the WCNSS_qcom_cfg.ini
This tweak will speed up LTE and wifi.
New v9.72 & v8.72
Only fixed some typo's,
New v9.71 & v8.71
Fixed Enable power save offload on wifi. Will speed up wifi and help save power.
New v9.70 & v8.70
Enable power save offload on wifi. Save battery when using wifi.
New v9.69 & v8.69
Enabled WMM on wifi should speed up playback of video and multimedia data.
New v9.68 & v8.68
Changed the wifi scanning period and enabled wifi dual bonding on the 2.4GHz band. This should speed up the internet on 2.4GHz band, and maybe save a little battery because I slowed the wifi scanning period down.
New v9.67 and v8.67
Updated to speed mod v5.28 change GPU governor to msm-adreno-tz with default 133mhz
New v9.66 & 8.66
Fixed Auto_Debloat script to work with the GPU Drivers.
New v9.65 & 8.65
Found an issue with the GPU drivers. Fixed GPU Drivers.
New v9.64 & v8.64
Updated to Speed Mod v5.27 Removed the GPU tweaks and adjusted the idle timer that should speed up the GPU also with out the battery drain I was experiencing.
New v9.63 & v8.63
Fixed zram settings.
New v9.62 & v8.62
Adjusted the GPU tweaks so they do not use too much power but still provide a performance boost.
New v9.61 & v8.61
Updated to Speed Mod v5.25 Added some GPU Tweaks
New v9.60 & v8.60
Updated to Speed Mod v5.24 Fixed typo in last speed mod.
New v9.59 & v8.59
Updated to Speed Mod v5.23 Changed the rq_affinity to number 2. That should speed up the eMMC drive and sdcard.
New v9.58 & v8.58
Fixed delete only log files.
New v9.57 & v8.57
Removed all the Auto_Debloat.log's on /system and moved to internal storage. I was just thinking that it may be getting a little bit messy on the /system with log files.
Also on the H910, updated to the latest version of twrp. twrp-3.7.0_9-0-h910
New v9.56 & v8.56
Updated to Speed Mod v5.22 All new interactive governor settings.
New v9.55 & v8.55
Updated to Speed Mod v5.21 and tweaked the interactive governor settings.
New v9.54 & v8.54
Updated to Speed Mod v5.20. Changed governor to interactive, increased speed & increased battery life.
New v9.53 & v8.53
Updated to Speed Mod v5.19 Fixed some things with the TCP Speed Mod
New v9.52 & v8.52
Updated to Speed Mod v5.18 added a TCP Speed tweak to speed up internet.
New v9.51 & v8.51
Updated to Speed mod v5.17 Changed the TCP Algorithm to cubic. May speed up internet and make it more stable. I have an issue with Wifi Calling where the voice will cut in and out sometimes, this should fix that issue.
New v9.50 & v8.50
Changed the version number from 8.0.0_Lemon_Drop back to the default. I don't think it will hurt anything but still it was bugging me.
New v9.49 & v8.49
Updated to speed mod v5.16 changed GPU Governor to Simple_Ondemand and change the power level to save battery power.
New v9.48 & v8.48
Fixed Ram Optimization Tweaks
New v9.47 & v8.47
Updated the United States GPS fix. All other locations you can update manually link
New v9.46 & v8.46
Just some minor fixes with the script
New 9.45 & v8.45
Fixed another error in the build.prop file with Enable System wide Quad DAC support. This may improve sound quality.
New v9.44 & v8.44
Fixed an error in the build.prop file with the Enable System wide Quad DAC Support.
New v9.43 & v8.43
Added new build.prop GPU tweaks. This will improve the font on the Lgv20.
ro.hwui.use_gpu_pixel_buffers=true
ro.hwui.text_gamma_correction=lookup
ro.hwui.text_gamma=1.4
ro.hwui.text_gamma.black_threshold=64
ro.hwui.text_gamma.white_threshold=192
ro.hwui.disable_vsync=false
ro.hwui.render_dirty_regions=false
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.hw=1
debug.composition.type=gpu
sys.use_fifo_ui=1
ro.HOME_APP_ADJ=1
New v9.42 & v8.42
Added some more GPU build.prop tweaks
debug.performance.tuning=1
debug.egl.hw=1
debug.composition.type=gpu
ro.HOME_APP_ADJ=1
New v9.41 & v8.41
Fixed an issue in the build.prop file with the GPU tweaks.
New v9.40 & v8.40
Added some GPU build.prop tweaks
hwui.disable_vsync=true
hwui.render_dirty_regions=false
debug.sf.hw=1
video.accelerate.hw=1
New v9.39 & v8.39
Updated to speed mod v5.15 trying to save a little bit of battery life without sacrificing speed. Also fixed some apps crashing.
New v9.38 & v8.38
Added some Zram tweaks.
New v9.37 & v8.37
I got Zram fixed. I was able to have 22 apps open at the same time and Android did not close the apps on me. I was using 1.8 gig's of Zram when doing that. Because Zram was never working before it will take like 1 second sometimes to open an app that's because it's in compressed ram and the phone needs to uncompress it on the fly. So just an fyi. The Zram size is 2304MB with a mem_limit of 768MB. But this will save loading from the eMMC drive because we are loading the apps from Zram once you have opened the app. Oh yeah and swapfile is disabled. Enjoy everyone.
New v9.36 & v8.36
Also Changed zram disk size to the optimal size of 2304MB I did the math and this is the best size of zram for this phone. Swapfile is disabled.
New v9.35 & v8.35
Removed the swapfile as it may slow the phone down. Increased the size of the Zram.
Enable 768MB Zram mem_limit and disksize of 3840MB
New v9.34 & v8.34
Fixed an issue with the swapfile priority
New v9.33 & v8.33
Changed Zram to 768MB Added swapfile 1024MB
Fixed issue with sluggish ui
I set the priority of Zram to high and the swapfile to low so the phone will use Zram first then once it's filled up the phone will start using the swapfile. This should give us a lot more ram for multitasking.
New v9.32 & v8.32
Added a 1.5Gig Zram with lz4 compression. Removed Swapfile.
Well I did a lot of research and trial and error, and have concluded that we need to give zram a try. I have came up with a custom zram that's 1.5Gig's. This phone is lacking ram. I wish we had 6 gig's or 8gig's. But we have 4gig's and most of that is used by the OS. So the only way to increase the ram on the phone is with zram. The next version will have my own custom zram config that's 1.5gig's. I got it done already. I guess I always thought that zram would slow my phone down, but I have tweaked this version to make it fast. I have to say I am impressed with the results.
New v9.31 & v8.31
Changed swapfile size to 256MB
Found the optimal swapfile size it's 256MB. That will reduce writes on the eMMC drive and still allow you to open a number of apps at the same time without having android kill them. The tweak from last version helps a lot also by freeing up extra ram.
New v9.30 & v8.30
Free up extra ram by reset zram0 and zram1
Lemon Drop is still using a swapfile
New v9.29 & v8.29
Added Speed mod v5.14 change micro sdcard disk scheduler to noop. Might speed up sdcard a little bit.
New v9.28 & v8.28
Added the Lemon Drop Boot logo. I think the phone may boot a little bit faster because there is no animation to load.
New v9.27 & v8.27
Added Speed mod v5.13 fixed image retention issue.
New v9.26 & v8.26
Added Speed mod v5.12 some tweaks a little faster and may improve battery life.
New v9.25 & v8.25
Tweaked the 1024MB Swapfile
New v9.24 & v8.24
Added Internet Speed Tweak
I tweaked "/system/vendor/etc/wifi/wpa_supplicant_overlay.conf" and the wifi is a lot faster now.
New v9.23 & v8.23
Added Camera improvement tweak. This will make the photos you take crisp, clear and sharp.
New v9.22 & v8.22
Fixed bug if system is mounted as read-only. If so then Auto_Debloat would not install. Some other small bug fixes.
New v9.21 & v8.21
Added speed mod v5.11. This should speed up the phone a little bit more. Should also save battery life. I tweaked the sched_upmigrate and sched_downmigrate. The up is set to 95% and down is set to 90%. So if a task is using more that 95% of cpu it will go the big cpu and vice versa.
New v9.20 & v8.20
Increased the swapfile to 1024MB & some fixes. No Zram only a swapfile.
New v9.19 & v8.19
Added Speed Mod v5.10 Tweaked Entropy speed tweak a little bit more.
New v9.18 & v8.18
Added Speed mod v5.9 Added an entropy speed tweak. Should speed up the phone and help with lag.
New v9.17 & v8.17
New Name for the Rom: Lemon_Drop
Added name to Android Version 8.0.0_Lemon_Drop
Just if you were wondering it's the Lemon Drop Candies not the drink. They were always my fav as a kid.
New v9.16 & v8.16
Added United States GPS Fix
To: /system/vendor/etc/gps.conf
New v9.15 & v8.15
Changed the swap file to 512MB, It's more like 488MB but it should be plenty.
New v9.14 & v8.14
Added a 341MB swap file to /cache/swapfile
This is something I wanted to do for a long time but I did not know where to put it at. The cache directory is the best place for it. Flashing the Speed Mod will remove the swap file. If that happens just flash Auto_Debloat again.
On v9.14 & v8.14
You may want to do a format data & reinstall of Oreo And Auto_Debloat. My phone is running faster, sound is great, I am getting close to the final version, this may be it.
New v9.13 & v8.13
Added AdAway default blocklist to /system/etc/hosts
New v9.12 & v8.12
Added a cool Droid startup animation no sound.
New v9.10 & v8.10
Updated speed mod to v5.8, a lot faster now. I think this is the max speed I can get out of the Lgv20.
New v9.9 & 8.9
It's even faster than v8.9 & v8.8. I found OTA file that is needed by the phone to do updates. I deleted that. And also I downgraded Magisk from v23.0 to v21.4 in v9.9. I think for now we should just stay on Magisk v21.4 it seems to work the best with Oreo. Only thing is you need to do another full reinstall again, for this new version. I am getting close to being done with Auto_Debloat.
New v9.8 & v8.8
Formatted the RCT and FOTA devices. Before I was just wiping them. Now there is no way the phone can download FOTA updates. Not in less Android knows how to read a NTFS file system. I think this new version has improved the speed of the phone a lot. Full reinstall is required for this version. Also found out how to unmount all the partitions after Auto_Debloat is done.
New v9.7 & v8.7
Updated to Speed mod v5.7 some other fixes. Enjoy.
I think this is it for awhile. I just keep finding thing to tweak. I am having fun.
New Stable versions of Auto_Debloat
v9.6 & v8.6
Updated the speed mod to v5.6
v9.5.1 & v8.5.1
I spent a lot of time changing the Auto_Debloat install script to get a perfect install of Stock Oreo Debloated. The trick is to un-mount all partitions after Auto_Debloat is done and before you reboot from TWRP into system. It's recommended to do a full reinstall with this version. Lot's of changes to the install script. Also Updated twrp to twrp-3.6.2_9-0-h910.
v9.2.2 & v8.2.2
Sable Branch version also. Has no add-on mods installed. It's recommended to do a full reinstall with this version. Lot's of changes to the install script. Un-mount all partitions after Auto_Debloat is done and before you reboot from TWRP into system.
v9.4 &v 8.4
Updated the Speed mod from v5.4 to v5.5. Moved Auto_Debloat_log to /system and moved build.prop.stock to /system.
Also there was an issue with Auto_Debloat v9.3 & v8.3 where it was not backing up the original build.prop file. Also my phone was getting hot with v9.3 & 8.3 IDK why? But this new version phone seems to be running a lot cooler.
This version there is some other changes I made to improve the install of Stock Oreo. I would recommend doing a full reinstall with this version, if anything to get your stock build.prop file backed up.
v9.3 & v8.3
I wanted to Include some of my Add-on Mods in Auto_Debloat.
What's included is in v9.3
24_BIT_Deep_Buffers_Enabler_v4.1_Lgv20_Oreo
DAC_Enabler+LGMusic_v1.3
Speed_Mod_Lgv20_msm8996_Oreo_v5.4
Thermal_Engine_Mod_v7.0_70c
System wide Quad DAC support. V6.2 in build.prop file
What's included in v8.3
24_BIT_Deep_Buffers_Enabler_v4.1_Lgv20_Oreo
Speed_Mod_Lgv20_msm8996_Oreo_v5.4
Thermal_Engine_Mod_v7.0_70c
System wide Quad DAC support. V6.2 in build.prop file
You can always just flash the version of the mod you want. Theses are just what's included.
You can update if you want, it's always best to do a full reinstall. Update instructions are down below.
v9.2 & v8.2
I was having an issue with my sdcard, my files were getting corrupted. I think I fixed the issue with v9.2 and v8.2. You can update if you want, it's always best to do a full reinstall. Update instructions are down below.
I think it had something to do with Oreo wanting to encrypt the sd card. But it's a issue I have been dealing with for a long time. Let's hope I got it this time. Always backup your sdcard just in case.
v9.1 & v8.1
This version is 95% Vanilla Stock Oreo Debloated to the max. Same for v9.2 & 8.2. This version there is a bug that may corrupt your sd card. Best use v9.2 or 8.2 if you want a Vanilla Stock Oreo Debloated.
05-06-23
Auto_Debloat v9.82 Version for H910/H915 Install Stock Oreo & debloat.
****Warning ONLY flash on the H910/H915****
What's included in v9.82?
Modded boot.img
Triton removed
LG RCT removed (root checker tool)
twrp-3.7.0_9-0-h910
Updated Oreo Modem Drivers
Magisk 24.3
ezV2020 Kernel v1.0
New GPU drivers 313.0 V11
24_BIT_Deep_Buffers_Enabler v4.2 force true 24 bit audio at 44.1 kHz
DAC_Enabler+LGMusic_v1.3_Oreo
Speed_Mod_Lgv20_msm8996_Oreo_v5.28 / includes image retention fix
Thermal_Engine_Mod_v7.0_70c
System wide Quad DAC support. V6.2
Added AdAway default blocklist to /system/etc/hosts (aka ad blocker)
Added United States GPS Fix
Added Camera improvement tweak
Added Internet Speed Tweaks
Added the Lemon Drop boot logo
Added Zram of 2.5GB + LZ4 algorithm and Zram optimization tweaks
Added Hide boot warning message
Added dual channel bonding on 2.4GHz
Upgrade Instructions:
Flash Auto_Debloat v9.x in twrp reboot. If on a lower version of Magisk v24.3 then install the latest working version of Magisk-v24.3.apk GitHub Link, Open Magisk it will say Requires Additional Setup press Ok and Allow if asked. Patch vbmeta in boot image click next. Direct install recommended let’s go then reboot.
Installation instructions:
Before installing Auto_Debloat you need to be on the latest version of twrp. The H915 needs to install the H910 twrp.
Update twrp. twrp-3.7.0_9-0-h910.img
With the phone powered off, hold the down volume button and plug in usb to computer and phone.
type on your computer:
fastboot flash recovery twrp-3.7.0_9-0-h910.img
fastbboot reboot
take battery out
put back in
go into twrp by doing a factory reset. How to factory reset the Lgv20
1. First download the two required files.
If you are having issues downloading the rom you can try this download manager for Firefox.
Turbo Download Manager
H910_20g_Oreo_full_rooted.zip
Auto_Debloat_H910_20g_only_v9.x_flashable.zip
2. Then copy both files to the micro sdcard on phone
3. Reboot into twrp
4. Click Wipe
5. Format Data Partition (this will erase your internal storage on the phone)
6. Click back and reboot into recovery again. aka twrp
7. Flash H910_20g_Oreo_full_rooted.zip
8. Flash Auto_Debloat_H910_20g_only_v9.x_flashable.zip
9. Reboot into system, run setup
Notes:
You can use an app like package manager to debloat more apps on your phone.
Magisk app v26.1, does not work with Oreo. Magisk 24.3 is the latest version that works with Oreo.
I had issues running the H910 v20H rom, my phone would crash after a day or two. With the v20G rom, my max uptime was 31 days.
Good idea to reinstall your EFS to get cell signal woking. Under "Is there a guide I can root my Lgv20 with Dirtysanta?" You only need to do this once.
You can DeGoogle at any time, if you want. Under "I want to DeGoogle after Auto_Debloat, can I do that?"
100% FOSS apps you may find useful.
Download FOSS software
F-Droid
File Manager
Amaze or Material Files
Deleted LGClock
Deskclock or New Clock
Deleted LGWeather
Forecastie or Weather
Deleted Google Calculator
OpenCalc or yetCalc
Deleted Google Keyboard
AnySoftKeyboard or OpenBoard
Deleted Google Maps
Organic Maps
Deleted YouTube
Newpipe
Twitch Client
Xtra
Deleted Google Play Music
ViMusic or InnerTune
Podcast Client
AntennaPod
Ad Blocker
AdAway
Tea Timer
Cuppa - Tea Timer
Reddit Client
Infinity
Deleted Facebook
Frost for Facebook
Latest Chromium based browser
Kiwi Browser Next download arm64
05-06-23
Auto_Debloat v8.82 Version for most Lgv20 phones, Install Stock Oreo & debloat
What's included in v8.82?
New GPU drivers 313.0 V11
Disable MLT/LDB
Removed Triton
Disabled LG RCT (root checker tool)
Disabled LG Backup
Disabled ccmd
With out having to Mod your boot.img
24_BIT_Deep_Buffers_Enabler v4.2 force true 24 bit audio at 44.1 kHz
Speed_Mod_Lgv20_msm8996_Oreo_v5.28 / includes image retention fix
Thermal_Engine_Mod_v7.0_70c
system wide Quad DAC support. V6.2
Added AdAway default blocklist to /system/etc/hosts (aka ad blocker)
Added United States GPS Fix
Added Camera improvement tweak
Added Internet Speed Tweaks
Added the Lemon Drop Boot logo
Added Zram of 2.5GB + LZ4 algorithm and Zram optimization tweaks
Added dual channel bonding on 2.4GHz
Upgrade Instructions:
Flash Auto_Debloat v8.x in twrp reboot. If on a lower version of Magisk v24.3 then install the latest working version of Magisk-v24.3.apk GitHub Link, Open Magisk it will say Requires Additional Setup press Ok and Allow if asked. Patch vbmeta in boot image click next. Direct install recommended let’s go then reboot.
Installation instructions:
Before installing Auto_Debloat you need to be on the latest version of twrp.
Update twrp link
With the phone powered off, hold the down volume button and plug in usb to computer and phone.
Note: twrp.img is your version of twrp image file name
type on your computer:
fastboot flash recovery twrp.img
fastbboot reboot
take battery out
put back in
go into twrp by doing a factory reset. How to factory reset the Lgv20
1. First download the five required files.
If you are having issues downloading the rom you can try this download manager for Firefox.
Turbo Download Manager
Stock Oreo 8.0 rooted rom, for your Model of Lgv20.
H918 Rom
US996 DIrtysanta Rom
VS995 Rom
H900DS Rom link1
H990DS Rom link2
ezV2020 kernel for Oreo link
Magisk-v21.4.zip
Latest version of twrp link
Auto_Debloat_Lgv20_msm8996_Oreo_v8.x_flashable.zip
2. Then copy the five files to your micro sdcard
3. Reboot into twrp
4. Click Wipe
5. Format Data Partition (this will erase your internal storage on the phone)
6. Click back and reboot into recovery again. aka twrp
7 Flash in order
A. Your version Of Stock Oreo 8.0 rom
B. ezV2020 Kernel
C. Magisk v21.4
D. Twrp (The twrp img file you can flash with twrp you just need to select Install Image, select the file and choose recovery)
E. Auto_Debloat_Lgv20_msm8996_Oreo_v8.x_flashable.zip
8. Reboot into system, run setup
Notes:
You can use an app like package manager to debloat more apps on your phone.
Magisk app v26.1, does not work with Oreo. You can install the latest working version of Magisk-v24.3.apk GitHub Link, Open Magisk it will say Requires Additional Setup press Ok and Allow if asked. Patch vbmeta in boot image click next. Direct install recommended let’s go then reboot.
Good idea to reinstall your EFS to get cell signal woking. Under "Is there a guide I can root my Lgv20 with Dirtysanta?" You only need to do this once.
You can DeGoogle at any time, if you want. Under "I want to DeGoogle after Auto_Debloat, can I do that?"
100% FOSS apps you may find useful.
Download FOSS software
F-Droid
File Manager
Amaze or Material Files
Deleted LGClock
Deskclock or New Clock
Deleted LGWeather
Forecastie or Weather
Deleted Google Calculator
OpenCalc or yetCalc
Deleted Google Keyboard
AnySoftKeyboard or OpenBoard
Deleted Google Maps
Organic Maps
Deleted YouTube
Newpipe
Twitch Client
Xtra
Deleted Google Play Music
ViMusic or InnerTune
Podcast Client
AntennaPod
Ad Blocker
AdAway
Tea Timer
Cuppa - Tea Timer
Reddit Client
Infinity
Deleted Facebook
Frost for Facebook
Latest Chromium based browser
Kiwi Browser Next download arm64
The latest version of Auto_Debloat, can be download from MEGA or XDA.
Latest version of Auto_Debloat + Mods & Tweaks MEGA
SHA1 = e12c6b241fde84fe792c1910d0d5f1dcecb550af
Auto_Debloat_H910_20g_only_v9.82_flashable.zip
SHA1 = 2314baa5dc0054a3b94dea916bb5f329d51ce3fd
Auto_Debloat_Lgv20_msm8996_Oreo_v8.82_flashable.zip
Credits, A Special Thank You
@ezzony - for the ezV2020 kernel. XDA
@askermk2000 - for the MK2000 kernel. XDA
@me2151 for DirtySanta. XDA
@darkknight200 for the H910 Oreo modem drivers. Download Link
@gavin19 for providing the Adreno 530 GPU drivers 313.0 V11 non-treble-use Download Link
@Alex_HP for the Camera Improvement tweak for Oreo XDA
@helf for the original Camera Improvement tweak for Nougat XDA
@helf for the KCAL settings XDA
@rawe_etc for the TCP Speed mod XDA
@ZDeuce2 for the slow wifi fix XDA
@tom.etc for the dual bonding speed tweak XDA
@4shared for how to hide boot warning message on H910 XDA
@ezzony for the FM Radio mod for Oreo XDA
@clsA for the H910 Oreo v20g rom. XDA
@dudeawsome for the H918 Oreo Rom XDA
@darkknight200 for the DirtySanta-US99620F Oreo Rom Download link
@thchipmunk for hosting the VS995 Oreo Rom XDA
@NotYetADev for making the VS995 Oreo Rom XDA
@dudeawsome for the H990DS Oreo Rom Link1 XDA
@reza_xdv for the H990DS Oreo Rom Link2 XDA
at amitwh for the interactive governor settings for the msm8996 Github
at the people over at AdAway Hosts List GitHub
at the people over at Magisk, for an Opensource Root.
at the people over at TWRP for a great recovery app
at XDA, for a Great Platform.
at Everyone that gave feedback.
And everyone else that I may have missed that helped with the Lgv20.
FAQ & Troubleshooting guide
Updated on 05-17-23
Questions (please read before rooting, or flashing Auto_Debloat)
What's the number one rule I should know before I root my Lgv20?
Very crucial before you flash the KDZ to downgrade your firmware for rooting, make a DUMP with LGUP all files, you don't need to dump system or cache. Put it in a very safe place, like google drive. It will have your EFS and your EFS has the IMEI number of that particular phone. If your EFS ever becomes corrupted then you can re-flash your EFS from your backup to get cell signal working again.
Can I just edit step3.bat and install the latest twrp in there?
No. You need the old version of twrp to format data, then you can update twrp to the latest version. You only need to remove the encryption on the data partition once, when rooting your phone. The old version of twrp is the only version I know of, that can remove the encryption on the data partition.
My camera does not work after Auto_Debloat?
If you were on LIneageOS or crDroid and then flashed Stock Oreo, then your camera may not work afterwords. The only fix that I know of is to root your phone again. Flash the KDZ to downgrade your firmware and root again.
I can not download Magisk modules with v24.3?
It's because that version of Magisk is too old, that's the only version that works with Oreo. You can still install Magisk modules offline, from the zip file.
What is the EFS?
"EFS stands for Encrypting File System, which is really important part of networking and communication for Android Smartphones, It also contains your device IMEI data."
What is the MSM8996?
"MSM8996 (or Snapdragon 820) is a Qualcomm SoC released in 2016."
What does FOSS mean?
Free and open-source software
Can all Lgv20 phones be rooted?
Most but not all.
How to check to see if you can root, lgv20 Anti-Rollback Version ARB
Can my LS997 install the Lemon Drop Rom?
As far as I know there is no Oreo Stock rom for the LS997, so Auto_Debloat will not work on that model of phone. But you may be able to install Lineage OS depending on your firmware. Check your ARB.
Sprint LG V20 Model (LS997): Comprehensive Overview of Guides and Resources (and why most LS997 phones are unrootable)
Go back to the top post and follow the install guide for your phone.
End of questions.
Is there a guide I can root my Lgv20 with Dirtysanta?
Yes, this is how I rooted my H910. It should be about the same for other Lgv20 phones, you just need to find your root guide for your phone.
1. Disable real time scanning, on the windows virus scanner. Download all the files, save terminal emulator to your microsd card the other two save on your computer, unzip dirtysanta, install usb drivers if using windows. Root your H910 with this guide.
h910_root_pkg.zip "DirtySanta root package"
usb drivers for windows
Terminal Emulator for Android "f-droid Download APK at bottom of page"
2. [ROOT] HOWTO: AT&T H910 up to v20g (FULLY TESTED) Note: before you flash the KDZ to downgrade your firmware make a DUMP backup with LGUP all files. You don't need to DUMP system or cache. It will have your EFS.
3. On step3.bat wait for phone to reboot from fastboot mode, when you see the LG logo, pull the battery. Do a factory reset and that will load TWRP How to factory reset the Lgv20.
4. Then format data. Very important, you format data with the older version of twrp that is with dirtysanta.
5. Then power off phone.
Note: This next part is for the H910, you need to get your version of twrp for your model of Lgv20. Latest version of twrp link at the bottom of page
6. Download twrp for the H910 twrp-3.7.0_9-0-h910.img
7. With the phone powered off, hold the down volume button and plug in usb to computer and phone.
type on your computer:
fastboot flash recovery twrp-3.7.0_9-0-h910.img
fastbboot reboot
take battery out
put back in
go into twrp by doing a factory reset. How to factory reset the Lgv20
8. Then you want to format data once more with the new version of twrp.
9. power off phone
10. Now would be a good time to reinstall your EFS. Just scroll down tell you see Manually reinstall your EFS on the Lgv20.
Troubleshooting guide for Dirtysanta
Getting an error on step1.bat "dirtysanta no such file or directory"?
Just disable real time scanning in windows defender, and try again. You will have to unzip the files again as windows defender will eat up dirtysanta. Dirtysanta was created by the Lgv20 community at XDA, it's not a virus.
I am stuck in fastboot mode on step3.bat, I get an error?
You most likely have a driver issue in windows. Just stay in fastboot mode fix your windows drivers and run step3.bat again.
[GUIDE] V20 Fastboot access in Windows.
Getting Secure Start up when booting?
Secure start-up issue. If your getting this screen do not try and type in a password. After 30 attempts it may brick your phone. What's going on is your data partition is still encrypted. You need to do a format in twrp on the data partition. Some versions of twrp will not remove the encryption correct for the Lgv20. I know the twrp version that is with dirtysanta will remove the encryption from the data partition. Then you can just update twrp again, you only need to format once.
Stuck at boot screen after flashing Nougat rom to root?
After flashing the rom to downgrade your firmware to root, if your stuck at the boot screen. Factory reset that should fix the issue.
Manually reinstall your EFS on the Lgv20.
You need to find your Original DUMP of the rom your Lgv20 phone was on, before you downgraded your firmware for rooting.
With the phone powered off, hold the down volume button and plug in usb to computer and phone.
type on your computer:
Note: COM6 is what ever com port you were using at the time.
fastboot flash fsg fsg_COM6
fastboot flash misc misc_COM6
fastboot flash modemst1 modemst1_COM6
fastboot flash modemst2 modemst2_COM6
fastboot reboot
Note: If you just rooted your phone, take battery out after you type fastboot reboot. Because you do not have an os installed yet, the phone will not boot. Go back to the top post and follow the install guide for your phone.
End of dirtysanta guide.
I want to DeGoogle after Auto_Debloat, can I do that?
Yes you can, I will show you how to install microG. It's a free and open-source implementation of proprietary Google libraries, that serves as a replacement for Google Play Services.
Make sure your phone is all setup the way you like, before you DeGoogle. There is no rush, you can DeGoogle at any time. All your paid apps and games from the Play Store should run just fine with microG. You will still be able to download the free apps and games from the Play Store, just not your paid apps and games. In less you login via the Aurora Store with your Google account, but that is against Googles TOS, your account may get banned.
1. Only do this once. Copy all your contacts from your Google account to your sim card. Make sure your signed into Google Play Store, open up the phone app, choose Manage contacts, copy from your email address to your SIM card.
2. Then you want to remove your google account in settings, general, accounts. Un-Check Auto-sync Accounts. Then power off phone, do a factory reset to boot into twrp. How to factory reset the Lgv20
3. Mount system & data, make sure read only is not checked. Open file manager under Advanced and delete the following folders.
To remove any folder from your device, click on the folder.
Then hit the Delete button
Finally, perform a right swipe to confirm the deletion.
/system/priv-app/GmsCore
/system/priv-app/GoogleServicesFramework
/system/priv-app/Phonesky
/data/app/com.android.googlequicksearchbox (then some letters and numbers) May not be there.
/data/app/com.android.vending (then some letters and numbers) May not be there.
/data/app/com.google.android.gms (then some letters and numbers) May not be there.
4. Then restart phone into system, Close all the errors.
5. Then power off the phone.
6. Download the three files.
NanoDroid-microG-23.1.2.20210117.zip
NanoDroid-patcher-23.1.2.20210117.zip
NanoDroid-fdroid-23.1.2.20210117.zip
NanoDroid Main Page
7. Put them on your sdcard.
Note: Now would be a good time to let your phone cool down.
8. Boot into twrp.
9. Install NanoDroid-patcher
Note: this will take 10 minutes.
10. Install NanoDroid-microG
11. Install NanoDroid-Fdroid
12. Wipe Dalvik cache
Note: Now would be a good time to let your phone cool down.
13. Reboot into system.
14. Open F-droid, update.
15. Update to the latest version of Aurora Store from f-droid
16. Open up Aurora Services and click on Whitelist check mark Aurora Store.
17. Open Auroa store choose anonymous. Just choose the default settings for install.
18. Give microG all the permissions it wants. Open microG and enable Google Device Registration. Wait 30 seconds, then restart your phone. After your phone restarts, wait 2 minutes, open microG and check mark Cloud Messaging and the Location Modules.
All done, your phone is now DeGoogled.
Troubleshooting guide for DeGoogle
In microG under Self Check, Play Store Phonesky Has correct Signature is not checked.
First disable Chrome and then download and install Kiwi Browser Next arm64 from GitHub.
Download Termux and copy past this command:
su
pm grant com.android.vending android.permission.FAKE_PACKAGE_SIGNATURE
Or use adb
adb shell pm grant com.android.vending android.permission.FAKE_PACKAGE_SIGNATURE
Then update Google WebView to the Latest version from the Aurora Store, restart your phone.
Phonesky should now be checked.
I am logged in as anonymous and the search does not work in Aurora Store?
Yes it's a known bug, open Auora Store sign in as anonymous, open Kiwi browser, do a google search for like "Spotify Lite Play Store". The first link will say in the top left, Google Play. Just click on the link "Spotify Lite". You should get an option to open Aurora Store and set it as the default app. If you get an error "no such app found" or it loads F-droid, then go to settings, do a search for default. Click on Default apps, App links, Aurora Store, click on open supported links, change to ask every time.
Network Location not working with microG?
You have to install Apple UnifiedNlp backend from f-droid and enable it in microG under location modules, disable Deja Vu Location Serivce.
Push Notifications not working?
Clear all data on microG. Give it all the permissions it wants. Open microG and enable Google Device Registration. Wait 30 seconds, then restart your phone. Wait about 2 minutes, enable Cloud Messaging and Location Modules.
Text to speech is not working on my DeGoogled phone.
Install "Speech Services by Google" from the Aurora Store. It was removed automatically when you DeGoogled. Once you get Google Speech Services installed you can install the FOSS app RHVoice do a search for "Speech rate" to activate it.
End of DeGoogle Guide.
How do I install EdXposed on Oreo?
Download the following. All files are from GitHub.
EdXposedManager-4.6.2-46200-org.meowcat.edxposed.manager-release.apk
EdXposed-v0.5.2.2_4683-master-release.zip
riru-v25.4.4-release.zip
Using Magisk Install the following in this order.
1. riru-v25.4.4-release.zip
2. EdXposed-v0.5.2.2_4683-master-release.zip
Reboot
3. Install EdXposedManager-4.6.2-46200-org.meowcat.edxposed.manager-release.apk
EdXposed should now be installed on Oreo.
Note: don't update Riru. You need the older version for EdXposed.
The xposed module repository is not longer working. Some modules you can try.
Gravitybox
Greenify
End of how to install EdXposed.
How can I install the latest Viper4Android FX on Oreo?
Viper4Android FX is a Adaptive Digital Signal Processor that is very powerful, and enhances your phone's audio quality tremendously.
The Viper4Android FX Magisk module was cloned directly from GitHub link
1. If you have an older version of Viper4Android installed, open Viper4Android uninstall the drivers, uninstall in Magisk, also uninstall BusyBox NDK, reboot.
2. Download the latest Viper4Android FX from the mega link, or download from XDA down below.
Viper4Android FX 2.7.2.1
3. Install Viper4Android in Magisk, reboot.
4. Open Viper4Android, allow it to access files, give it root access to install the drivers, phone will reboot.
5. Enable Legacy Mode, this will force Viper4Android to stay on.
6. Done.
Viper4Android Presets
Viper4Android-presets GitHub
direct link
Viper4Android-presets-full-presets-v1.0.zip
1. To install the presets, download, unzip, copy the three folders to your VIPER4Android home directory on your phone. /sdcard/VIPER4Android
2. Then you need to reinstall Viper4Android in Magisk, this will convert all the Presets, may take about 10 minutes.
3.Then reboot.
4. When you open Viper4Andorid it will say no driver found. Just click ok and give it root access, phone will restart.
5. done
Troubleshooting guide & questions
I have Poweramp installed and Viper4Android FX stops working at random times.
Viper4Android will say Processing No. To fix, Disable Direct Volume Control in Poweramp. You may have to restart your phone.
Does Viper4Android FX work with 24bit Hi-Res music players?
Yes, it works with both Poweramp and Neutron music player.
Is there any free and open-source music streaming apps?
ViMusic, InnerTune or Termux Music Players Rom
Does Viper4Android FX work with the Lgv20 Quad DAC with wired headphones?
Yes
How many 24bit Hi-Res music players are there that work with the Lgv20?
Not Sponsored.
There are only two that I know of. Everything else is going to be 16bit Including LGMusic Player. USB Audio Player Pro should work on 24bit but I cant seem to get the free trial version to work on 24bit only 16bit.
24bit Hi-Res music players that are confirmed to work with the Lgv20. Free trails.
Hi-Res Music Player
Poweramp
Hi-Res Music Player
Neutron Music Player
End of how to install Viper4Android FX on Oreo.
Troubleshooting
How can I disable the built in ad blocker?
It's not hard to disable just download AdAway install it and give it root access and then click the pause button to disable the ad blocker. If you ever want to enable it, just click on the button again.
I installed the H910 20H rom with Auto_Debloat, my phone locks up and crashes.
I had issues running v20H, my H910 would crash after a day or two. On v20G my max uptime was 31 days.
How can I pass SaftyNet?
Open Magisk Click on settings scroll down to MagiskHide check that. Click back go to MagiskHide under the shield icon. Check mark Google play services.
I can`t Download Netflix from the play store?
It's becasue your phone is rooted. You can download Netflix from apkmirror.com or you can Degoogle your phone and download it then.
GPS takes for ever to get a lock?
You need to find and install the correct GPS fix for your country. Default is United States.
You just need to copy the gps.conf to /system/vendor/etc/ folder permissions are "0 0 0644" reboot. GPS should connected faster.
GPS Fix
Help I updated to Magisk 26.1 now Magisk will not load?
This is a problem with the app not Magisk it's self. Just uninstall the Magisk app and install the latest working version of the Magisk app.
Magisk-v24.3.apk
My camera does not work after Auto_Debloat?
If you were on LIneageOS or crDroid and then flashed Stock Oreo, then your camera may not work afterwords. The only fix that I know of is to root your phone again. Flash the KDZ to downgrade your firmware and root again.
Security PIN not working, or I forgot my PIN to login.
This can happen if you are restoring a twrp backup. Just delete your pin & set it back up again.
How to Delete Your Android Security PIN
"Improve Location Accuracy" keeps popping up when wifi-calling is enabled?
This is how you fix the google popup message.
Note: 910 is the model number of your phone
dial
*#546368#*910#
Field Test
GPRI VoLET/VoWiFi
IMS
Common
VoWiFi
Use Geolocation Information (Uncheck)
press back, tell you get to home screen
Restart phone
End of Troubleshooting guide.
Frequently Asked Questions
How can I save battery power on the H910 & all phones?
You can turn off AT&T Auto Connect under WIFI. Then under NFC Disable Tag Reading. Also you can download Force_Doze_Mode, this is for all phones.
Force Doze Mode Force your phone into doze mode to save battery. (root only) With Google or without, like LineageOS or a DeGoogled phone.
Also one of my favorite programs for all phones
SuperFreezZ "making it possible to entirely freeze all background activities of any app."
Also if you want to save your battery from wear you can use BatteryBot Pro. You can set an alarm when charged is reached and you can see your battery level on the second screen with the screen off.
BatteryBot Pro "Battery monitoring tool"
Can I see some benchmarks for Auto_Debloat v9.67 & v8.67?
I have an H910 so I can show you benchmarks from Auto_Debloat v9.66 DeGoogled Oreo v20g. I am still using the LG OEM 2018 battery, so a new battery may show better performance.
Geekbench 5
3dmark max
All internet speed tests were done on Auto_Debloat 9.74
Home Wifi on 2.4GHz 144 connection.
AT&T LTE
What options do you recommend for a twrp backup?
Your sdcard need's to be formatted in exfat.
Boot
Recovery
System Image
data (excl. storage)
EFS
Firmware
LAF/Download Mode
What about a twrp restore?
You should factory reset, then restore only if you were already had Lemon Drop installed.
You only need to flash.
Boot
System Image
Data
How do I format my sdcard for the Lgv20 & copy over my data?
Note: Formatting will delete all you data on your microsd card. So you may want to make a backup first before formatting.
I have found that it is best to format the sdcard in twrp.
Click on Wipe
Click Advanced Wipe
Check Mark Micro SD card
Click repair or Change file System
Click Change File System
Click on exFAT
Swipe to format
It's best to just Mount the Usb Storage in TWRP to copy over your data to you micro sd card. I was having issues with my sdcard reader in my laptop. I think it was corrupting the files on the sd card. This way you don't ever have to take your card out of your phone.
What is the differences between Auto_Debloat 9.x & Auto_Debloat 8.x?
Not much they are almost identical. Auto_Debloat 9.x has the H910 boot.img, twrp and modem drivers. Auto_Debloat 8.x does not have the boot.img, twrp or modem drivers, so it can be used on most Lgv20 phones, running Stock Oreo 8.0.
Can I use my Unlocked Lgv20 on another carrier, after Auto_Debloat?
You will need to make sure your APN is setup. Access Point Names, Go to settings, Mobile Networks, Access Point Names. If you do not see your carrier there you need to manually type it in. Do a google search to find your APN carrier settings. Other than that you will need to find out if the Lgv20 model phone you have is compatible with the carrier you are using it on. You may also need to call your cell provider and have them enable LTE or give them your IMEI number.
What does Auto_Debloat change on the Lgv20?
It removes a about one gigabyte of bloatware, disables all logging on the phone. Disabled MLT/LDB that slows your phone down. Removed LG Root Checker tool. Disabled all FOTA updates, when your phone is rooted FOTA updates will break your phone. Oh and there is my very own custom build.prop tweaks I have put together. Also Auto_Debloat will update the GPU drivers. All these changes will speed up the Lgv20 and bring it back to life, so you can use it for years down the road.
Why did I make the Lemon Drop Rom and the extra-add on mods?
I love my Lgv20 phone, it's an awesome phone. I don't think there will ever be another phone like the Lgv20. I want to use my Lgv20 phone for years down the road. I cant stand it when my phone or computers don't run perfect.
Why did I make the FAQ & Troubleshooting guide?
There is no way I could remember all this information. I use the guide myself, when I need to reinstall the Lemon Drop Rom. Once I forgot that I needed to reinstall my EFS, and I could not understand why I was only connecting at 4G not LTE. That's when I decided I need to write all this information down.
I am a developer may I port Auto_Debloat to another phone?
Yes you may, I only have an Lgv20. But if you want to take the time and port Auto_Debloat over to another phone, go for it.
Is LTE going away because of 5G?
"LTE, which stands for Long Term Evolution, will be around for at least 10 years, so 5G will not make LTE obsolete any time soon. May 20, 2020"
Can I change my Lgv20 from CDMA to LTE/GSM?
Depending on your version of firmware.
LG V20 CDMA to LTE/GSM switch via Hidden Menu
Can I go to LineageOS from the Lemon Drop Rom?
Yes you can, flash the KDZ to downgrade your firmware and root your phone again.
The End.
Credits, A Special Thank You
@vlad48 for the CDMA to LTE/GSM Guide
@Vexamus for the fastboot windows drivers Guide
at Christopher Roy Bratusek for NanoDroid
at u/C---D for the guide on the LS997.
at Zackptg5 for the Viper4Android Magisk Module.
at jadilson12 for the Viper4Android-presets
at appuals.com for the guide on how to delete the security PIN.
at hardreset.info on how to factory reset the Lgv20
at viper520 for Viper4Android
at Aamir Siddiqui for the information about Viper4Android FX
EdXposedManager GitHub
EdXposed GitHub
Riru GitHub
V20 connoisseur, well done, nice to see this being kept alive. I do like my V20 even though its now a second phone. Thanks for your time & dedication on this
[email protected] said:
V20 connoisseur, well done, nice to see this being kept alive. I do like my V20 even though its now a second phone. Thanks for your time & dedication on this
Click to expand...
Click to collapse
Your welcome, not a problem. I love my Lgv20 phone.
Darnrain1 said:
First download
Auto_Debloat_Lgv20_msm8996_Oreo_v7.2_flashable.zip
Click to expand...
Click to collapse
There is no link to the flashable zip file? Or am I missing something here?
SidneyD said:
There is no link to the flashable zip file? Or am I missing something here?
Click to expand...
Click to collapse
Yeah give me 5 min I was putting the final touches on Auto_Debloat v8.3 and v7.3. Uploading now.
Auto_Debloat v9.1 and v8.1 Fixed GPU permission files. Backed up stock build.prop file just in case you ever need it.
Just wondering what do u mean by disabling the ota?
I mean what ota do u disable…
stingbandel said:
I mean what ota do u disable…
Click to expand...
Click to collapse
OTA Updates are short for Over the Air Updates. When your phone is rooted then OTA updates will break your phone. I disabled all OTA updates. Also if they push out an OTA Update that changes the ARB Anti Role Back on the Lgv20 then the Lgv20 will be bricked. So it's just a good idea to have them disabled when your phone is rooted. If your going to run a stock based rom.
"An over-the-air (OTA) update is the wireless delivery of new software, firmware, or other data to mobile devices. Wireless carriers and original equipment manufacturers (OEMs) typically use over-the-air updates to deploy firmware and configure phones for use on their networks over Wi-Fi or mobile broadband."
Hey I just wanted to say thank you for creating this! I have an h910, been running alphaomega for the last couple of years I guess pretty happy but it got a bit buggy and is no longer supported obviously.
So this afternoon I'm gonna back up and take the plunge, change to this stock debloated and see how I get along. I'm a bit nervous haha since it's been ages since I tinkered/flashed anything.....will I remember, will it go smoothly jaja....or will this be two days without a phone and lots of hours sat reading? Soon find out!
I love the v20, really appreciate peoples' efforts to keep it alive and useful - I don't know if I'll ever want/need more from a phone to be honest!
*edit* I'm having real problems getting the rom file from androidfilehost There is only one mirror available and it keeps cutting my connection, I have to pause and restart, downloads a few megs and then stops again.....
If it is easy to put up another copy of the file somewhere it'd be appreciated, thank you!
koodz said:
Hey I just wanted to say thank you for creating this! I have an h910, been running alphaomega for the last couple of years I guess pretty happy but it got a bit buggy and is no longer supported obviously.
So this afternoon I'm gonna back up and take the plunge, change to this stock debloated and see how I get along. I'm a bit nervous haha since it's been ages since I tinkered/flashed anything.....will I remember, will it go smoothly jaja....or will this be two days without a phone and lots of hours sat reading? Soon find out!
I love the v20, really appreciate peoples' efforts to keep it alive and useful - I don't know if I'll ever want/need more from a phone to be honest!
*edit* I'm having real problems getting the rom file from androidfilehost There is only one mirror available and it keeps cutting my connection, I have to pause and restart, downloads a few megs and then stops again.....
If it is easy to put up another copy of the file somewhere it'd be appreciated, thank you!
Click to expand...
Click to collapse
Thank you very much, I love my Lgv20 phone and don't want to see it die. I have used A/O in the past it is a good rom just a lot of bloatware on the H910 phone. It's not hard at all to install on the H910 just flash two files and your good to go. But as for download the rom I know what your talking about.
If you have issues downloading the rom from androidfile hosting you use this Firefox extension Multithreaded Download Manager
Edit: You also may want to take screen shots of your phone, that way you know how you had your phone setup before hand. Just press down vol and power at the same time. They are stored in /sdcard/Pictures/Screenshots Back them up to the micro sdcard because you will need to format data and it will wipe everything on your internal storage. Also you may want to backup everything you want to save from your internal storage to the micro sdcard.
Darnrain1 said:
Thank you very much, I love my Lgv20 phone and don't want to see it die. I have used A/O in the past it is a good rom just a lot of bloatware on the H910 phone. It's not hard at all to install on the H910 just flash two files and you good to go. But as for download the rom I know what you talking about.
If you have issues downloading the rom from androidfile hosting you use this Firefox extension Multithreaded Download Manager
Click to expand...
Click to collapse
Thanks for your reply! I reckon flashing it will be easy too - hope so!
I did try with a couple of different download managers in Firefox, no luck. Now slowly but surely getting it bit by bit in brave browser haha. It lets me resume after showing "network error", which firefox didn't. Fingers crossed!
koodz said:
Thanks for your reply! I reckon flashing it will be easy too - hope so!
I did try with a couple of different download managers in Firefox, no luck. Now slowly but surely getting it bit by bit in brave browser haha. It lets me resume after showing "network error", which firefox didn't. Fingers crossed!
Click to expand...
Click to collapse
Yeah Multithreaded Download Manager is the best download manager I have ever used for Firefox. If that don't work you can always use that extension. I just downloaded the rom just now took about 6 min to download. It download at full speed of your internet.
Darnrain1 said:
Yeah Multithreaded Download Manager is the best download manager I have ever used for Firefox. If that don't work you can always use that extension. I just downloaded the rom just now took about 6 min to download. It download at full speed of your internet.
Click to expand...
Click to collapse
Thanks again for your replies!
I will persist with brave for now, I'm at 1.4 gigs and it keeps resuming OK so I'll try to be patient haha. I live in the mountains with limited data connection only, when its good 700kbps, average 200ish - but 100gig a month current limit so I really want to get it this time without wasting data If this one doesn't work in brave, one more try with multithreaded and then a walk into town tomorrow if not.
Looking forward to having a clean install again, cheers!
koodz said:
Thanks again for your replies!
I will persist with brave for now, I'm at 1.4 gigs and it keeps resuming OK so I'll try to be patient haha. I live in the mountains with limited data connection only, when its good 700kbps, average 200ish - but 100gig a month current limit so I really want to get it this time without wasting data If this one doesn't work in brave, one more try with multithreaded and then a walk into town tomorrow if not.
Looking forward to having a clean install again, cheers!
Click to expand...
Click to collapse
Not a problem, just follow the Installation instructions and Auto_Debloat will do all the hard work for you.
Hey man just to update
The install went smooth as, everything seems very snappy and the battery seems to be lasting nicely, no greenify or anything else installed.
I did get an issue I had before when installing AlphaOmega - I had no modem (phone didn't recognize it had a sim card in the slot). I installed as per instructions formatting and rebooting, coming from my previous AO (also Oreo) installation. Fortunately, I solved this problem, wrote a detailed write up and still had my modified modem file from 3 years ago. Here is that detailed write up for if anyone else should have the problem of only having Modem (cell signal) or Fingerprint working after flash. Doesn't seem to happen to many people, but a few have had the same problem as me.
Now in the long process of getting the phone back as I want it
Thanks again for your time and effort on this - it is so nice to boot into a debloated, snappy phone.....just playing with all your recommendations now, the screen ghosting zip seems to have worked well, battery is great, phone is quick....I'll keep playing and reporting anything interesting etc Subscribed, too of course!
koodz said:
Hey man just to update
The install went smooth as, everything seems very snappy and the battery seems to be lasting nicely, no greenify or anything else installed.
I did get an issue I had before when installing AlphaOmega - I had no modem (phone didn't recognize it had a sim card in the slot). I installed as per instructions formatting and rebooting, coming from my previous AO (also Oreo) installation. Fortunately, I solved this problem, wrote a detailed write up and still had my modified modem file from 3 years ago. Here is that detailed write up for if anyone else should have the problem of only having Modem (cell signal) or Fingerprint working after flash. Doesn't seem to happen to many people, but a few have had the same problem as me.
Now in the long process of getting the phone back as I want it
Thanks again for your time and effort on this - it is so nice to boot into a debloated, snappy phone.....just playing with all your recommendations now, the screen ghosting zip seems to have worked well, battery is great, phone is quick....I'll keep playing and reporting anything interesting etc Subscribed, too of course!
Click to expand...
Click to collapse
That's great you got it working. Thanks for posting a guide about how to fix the modem on the H910. I know some people have had issues getting the cell signal working correct in Oreo. I have never had that issue before with both H910 phones I have. So that does help out. Enjoy.
hey everyone I have updated the Thermal mods today 5-5-22 and I have updated the speed mods 5-4-22. The thermal mods are most likely the final version, I am very happy with how they turned out this time. Sometimes I have one of those aha moments and everything just comes together. That's how it was with the thermal mods today.
Updated all the speed mods to v3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google Pixel 4
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 19.1 thread for the Google Pixel 4.
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
flame
flame - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
None.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Firmware is shipped in the ROM package for this device, so no need to worry about updating it on your own!
Kernel Source: https://github.com/LineageOS/android_kernel_google_msm-4.14
Great news! Thanks for bringing Android 12 to this device!
I just reading the installation instructions and there are some questions:
1. The instructions don't mention wiping the system/data partition. Does this mean that my device will work as before, that I will not have to reinstall my apps and data after upgrading? My device is neither rooted, nor do I use anything like Magisk.
2. The instructions say:
"Note: If you previously had any Google Apps add-on package installed on your device, you must install an updated package before the first boot of Android! If you did not have Google Apps installed, you must wipe the Data partition (or perform a factory reset) to install them."
That confuses me: when I installed LOS 18.1, I also installed the MtG package, that was available for the P4 at that time. After that, I never installed anything else via adb, I only updated what was offered in the PlayStore or by the OTA updater function.
How should I interpret that instruction:
A) I need to install the latest MtG, that is available for LOS 18.1, and then I can install LOS 19 plus MtG for LOS 19.
B) Installing LOS 19 plus the appropriate MtG at the same time (=before the first booting) is sufficient to make the system work again.
Thanks in advance for any help!
dvdram said:
Great news! Thanks for bringing Android 12 to this device!
.
.
.
Thanks in advance for any help!
Click to expand...
Click to collapse
Simply - boot into LOS 19 recovery
- Goto advance factory reset Format Data
- Then apply Update via ADB
- Reboot to recovery
- Apply MTG Packg [Gapps](https://wiki.lineageos.org/gapps.html) for LOS 19
- Boot into system
dvdram said:
Great news! Thanks for bringing Android 12 to this device!
I just reading the installation instructions and there are some questions:
1. The instructions don't mention wiping the system/data partition. Does this mean that my device will work as before, that I will not have to reinstall my apps and data after upgrading? My device is neither rooted, nor do I use anything like Magisk.
2. The instructions say:
"Note: If you previously had any Google Apps add-on package installed on your device, you must install an updated package before the first boot of Android! If you did not have Google Apps installed, you must wipe the Data partition (or perform a factory reset) to install them."
That confuses me: when I installed LOS 18.1, I also installed the MtG package, that was available for the P4 at that time. After that, I never installed anything else via adb, I only updated what was offered in the PlayStore or by the OTA updater function.
How should I interpret that instruction:
A) I need to install the latest MtG, that is available for LOS 18.1, and then I can install LOS 19 plus MtG for LOS 19.
B) Installing LOS 19 plus the appropriate MtG at the same time (=before the first booting) is sufficient to make the system work again.
Thanks in advance for any help!
Click to expand...
Click to collapse
reboot to recovery, flash newest ROM, reboot to recovery, flash MTG 12.1 - reboot to OS - done.
npjohnson said:
reboot to recovery, flash newest ROM, reboot to recovery, flash MTG 12.1 - reboot to OS - done.
Click to expand...
Click to collapse
So, no need to reinstall all personal apps and stuff?
dvdram said:
So, no need to reinstall all personal apps and stuff?
Click to expand...
Click to collapse
Correct. Again. Follow the wiki upgrade guide and all will be fine.
I had a problem with the March 17 update of my P4a. Thus, I didn't update the P4 that is also in my household. The problem is with visual voicemail failing. I created an issue here: https://gitlab.com/LineageOS/issues/android/-/issues/4523
Does anyone know if this also happened with the P4? I imagine the move to LOS19 would carry the same problem, since (I think) this update https://review.lineageos.org/c/LineageOS/android_packages_apps_Dialer/+/325978/ caused the issue.
Thanks for your work on this & keeping my old V20 useful.
npjohnson said:
Correct. Again. Follow the wiki upgrade guide and all will be fine.
Click to expand...
Click to collapse
That worked out very well. Thank you!
A few things I have not been able to figure out yet:
1. I can't find the quick setting tile for system profiles.
2. If the lockscreen's clock is set *not* to use two lines, it sticks to the upper left corner of the screen. The same is true for the "always-on-screen".
3. The owner's information used to be displayed directly beneath the clock and date, taking only one line. Now it is displayed at the button, taking more than one line.
4. How to change the white background when entering the unlock code?
I guess some, if not all of these things have not yet been implemented.
dvdram said:
That worked out very well. Thank you!
A few things I have not been able to figure out yet:
1. I can't find the quick setting tile for system profiles.
2. If the lockscreen's clock is set *not* to use two lines, it sticks to the upper left corner of the screen. The same is true for the "always-on-screen".
3. The owner's information used to be displayed directly beneath the clock and date, taking only one line. Now it is displayed at the button, taking more than one line.
4. How to change the white background when entering the unlock code?
I guess some, if not all of these things have not yet been implemented.
Click to expand...
Click to collapse
1.search for "Profiles" they're there
2. Intentional
3. An android 12 thing.
4. Don't think you can.
npjohnson said:
1.search for "Profiles" they're there
2. Intentional
3. An android 12 thing.
4. Don't think you can.
Click to expand...
Click to collapse
4: It was possible in A11.
3: Well, it looked better in A11.
2: Hm, why?
1: The system profiles are usable, there's just no tile for the quick settings. These are all quick setting tiles that I can see:
Hello guys...does this rom support VoLTE or VoWi-Fi? I don't know why, but if i insert the same SIM into my other phone, i have both of these services active...but not in my Pixel phone.
aresbv2000 said:
Hello guys...does this rom support VoLTE or VoWi-Fi? I don't know why, but if i insert the same SIM into my other phone, i have both of these services active...but not in my Pixel phone.
Click to expand...
Click to collapse
If stock supports it for your carrier, then yes. If not, no.
npjohnson said:
If stock supports it for your carrier, then yes. If not, no.
Click to expand...
Click to collapse
Thank you. So the answer is "No, it doesn't support VoLTE ot VoWi-Fi", since stock android 12.1 doesn't support . In my area the GSM signal is weak, VoWi-Fi was great on the other phone. So sad that Google decides to block some functions on different markets.
An old security issue has risen again: profiles should not switch while the device is locked.
Why? Because of this:
- create a profile with no screen lock.
- set a trigger for that profile: activate when connecting to a known wifi
- turn off wifi, switch to normal profile and make sure device is locked
- swipe down quick settings and activate wifi
- after a few seconds, wifi will connect, the new profile will be activated and the device will be unlocked without having to enter the unlock PIN!
I think this is a serious security issue, because any one who will find your "lost" phone and reaches the area covered by that specific wifi, will have instant access to your unlocked phone!
dvdram said:
An old security issue has risen again: profiles should not switch while the device is locked.
Why? Because of this:
- create a profile with no screen lock.
- set a trigger for that profile: activate when connecting to a known wifi
- turn off wifi, switch to normal profile and make sure device is locked
- swipe down quick settings and activate wifi
- after a few seconds, wifi will connect, the new profile will be activated and the device will be unlocked without having to enter the unlock PIN!
I think this is a serious security issue, because any one who will find your "lost" phone and reaches the area covered by that specific wifi, will have instant access to your unlocked phone!
Click to expand...
Click to collapse
That's intended behavior.
If you set up a profile to automatically unlock the device when you are at Wi-Fi, you can expect that anyone using the device would have that, how should we know it's out of your hands?
how should we know it's out of your hands?
Click to expand...
Click to collapse
That's exactly the point: you can't, but you also can not be sure that it's the rightful owner who holds the phone in his hands when the profile switches and the device unlocks!
I agree that there is a point in making things as convenient as possible for the user. But convenience and security exclude each other.
So, what about an extra option that, when activated, will not switch profiles while the device is locked? This option could be hidden in the developers options, so normal users are not even bothered to take care of it.
I remember this "feature" in LOS 16, and it was fixed, and I am surprised to see it again.
Thanks for the hard work. Will there be an update that bypass the screenlock when double press power button to launch the camera? In stock android 12 it doesn't require to unlock.
The camera app now stores its pictures in "pictures" instead of "dcim/camera". Is there a way to change this path to the old setting?
Starting with the very last 18.1 update, and continuing through now, with the 19.1 upgrade...
I can manually create shortcuts on the homescreen, but none of my apps can do it. In fact, when I did an OTA update of the last 18.1, it deleted all the widgets and shortcuts created by various apps. My browser cannot create shortcuts. Neither can the "Shelter" app, which I use to put a few "big brother" type apps into my work profile as a sandbox.
Am I missing some permission that I should change? What allows apps to create shortcuts?
Everything else works fine. Love this OS; been using it for years now!
npjohnson said:
Google Pixel 4
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 19.1 thread for the Google Pixel 4.
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
flame
flame - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
None.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Firmware is shipped in the ROM package for this device, so no need to worry about updating it on your own!
Kernel Source: https://github.com/LineageOS/android_kernel_google_msm-4.14
Click to expand...
Click to collapse
Perfect ROM for the Pixel 4, thank you so much!
Question though: is SOLI/RADAR working?
I can't find motion sense feature, and AOD only has the option to be on (or even off - no 'tap to wake' or motion sensing).
Cheers