HTC Flyer Bricked No Bootloader No Recovery - HTC Flyer, EVO View 4G

Hello,
I have a problem with an HTC Flyer.
The device cannot be started in bootloader mode or recovery mode.
The only thing that still works is the download mode.
The device is displayed as Qualcomm Diagnostic under Linux and Windows 7.
Is there a way to re-flash the bootloader?
Then fastboot would be possible afterwards.
I downloaded the original rom from the internet.
I unzipped the Rom according to another manual, so I now have all parts of the Rom available.
I have already tried it with the QFIL program, but you need an xml file for this, but this is not available in the ROM for the flyer.

Related

[Q] htc aria android 2.2 & hboot 1.03

hi
every one
i have htc aria that not support persian or arabic language i search on internet then i found i should have change my rom.
but my htc aria hboot is 1.03 and cant root my device
can any one help me
i search 2days but cant do anything
i read this http://forum.xda-developers.com/showthread.php?t=1504357&highlight=hboot+1+03
but i dont know
i forgot something to say i unlock my bootloder from here http://www.htcdev.com/bootloader/unlock-instructions
can any one help me or give me what i should do to support persian language in my htcaria???
i attach my info htc aria
tnx
i realy need it tnx
You'll need to get fastboot on your PC, and use it to flash a custom recovery (like http://forum.xda-developers.com/showthread.php?p=25490394)
If you're using Windows, you may also need drivers installed if you haven't already (they should come with HTC Sync)
I'm not sure where to get a build of fastboot, but that shouldn't be too hard with a little searching..
Once you have it, boot the phone into fastboot mode (like you have in that picture) & plug in the USB cable to your PC.
Open a command prompt (or terminal for Mac & Linux) and change to the directory where fastboot & the recovery image are. Then run "fastboot flash recovery cwm-5.0.2.3-liberty.img"
If it worked you should be able to boot into recovery on the phone (BOOTLOADER > RECOVERY) and install a ROM (like CM7 or something from the development section here)
Create a backup before you do if you want

unable to connect

Dears,
I wonder if you can help
I did the following steps successful.
unlocking bootloader
rooting
flashing cwm recovery
flashing cm10 (updated to CM11 successfully)
flashing gapps
but the phone stays S-on.
Now my computers does not recognize the phone.
In the windows device manager is a one listed under other devices.
But when i am looking for drivers automatically or manually the drivers cannot be found.
When I reboot my phone into bootloader mode then my computer recognize the phone and i have access via ADB or fastboot.exe
fastboot.exe -devices is listening my phone as FA3AAW905529
Maybe I need to S-off my device, but i dont know how.
I would like to have acces to folders on my phone.
Alternatively I installed Airdroide as a workaround.
P.S. Drivers are installed
Sincerely
Alex
No idea?
Sent from my One using xda app-developers app

Hot to enable USB Debugging when android os crashed on my phone ????

Hello,
I have htc desire 601 and android operating system crash and i am unable to boot in the system and enable usb debugging. My phone stops in htc logo. I tried to boot in recovery mode but it dont work and when i tried to root another rom i cant because USB Debugging is off... Has anyone solution for that kind off problem, please?????
sinkowc91 said:
Hello,
I have htc desire 601 and android operating system crash and i am unable to boot in the system and enable usb debugging. My phone stops in htc logo. I tried to boot in recovery mode but it dont work and when i tried to root another rom i cant because USB Debugging is off... Has anyone solution for that kind off problem, please?????
Click to expand...
Click to collapse
U can boot into Hboot right??
If so then go to fastboot mode from there & flash Recovery
If that's not the option for u then i think ruu(rom upgrade utility by htc dev )is solution for u...
yes i can do that to go in hboot mode and i downloaded that ruu file and cannot do that because pc doesnt find my phone and i have installed drivers. Everywhere it says that USB debugging must be enable to do that. I have also downloaded sdk manager and platform tools to try install ruu with cmd via usb cabel but device was not found also. I tried many ways that is on youtube and xda forums but there isnt any good solution yet for me. For good solution that work il gave some donation.
Flash Recovey via fastboot If Device Stuck or Crashed
sinkowc91 said:
yes i can do that to go in hboot mode and i downloaded that ruu file and cannot do that because pc doesnt find my phone and i have installed drivers. Everywhere it says that USB debugging must be enable to do that. I have also downloaded sdk manager and platform tools to try install ruu with cmd via usb cabel but device was not found also. I tried many ways that is on youtube and xda forums but there isnt any good solution yet for me. For good solution that work il gave some donation.
Click to expand...
Click to collapse
Requirements---
1)twrp recovery https://dl.twrp.me/zara/
a)if ur's is zara ul then go for https://dl.twrp.me/zara/twrp-2.8.7.0-zara.img.html
b)if it's zara cl then go for https://dl.twrp.me/zara/twrp-2.8.7.0-zaracl.img.html
2)fastboot cmd 'fastboot flash recovery recoveryname.img' ------------> Where Recovery Name is the file name of ur recovery
3)Any Custom Rom Or Stock Zip
Procedure
1)boot into hboot
2)click on fastboot and connect usb cable
3)open cmd and check fastboot devices
4)it show some id with fastboot name [if it is then u r good]
5)now copy the recovery in ur current cmd folder or else change the folder of cmd into ur recovery path
6)now type fastboot flash recovery twrp-2.8.7.0-zara.img
7)now click on boot loader and scroll down to recovery then click on it
8)now ur in recovery mode now flash any custom rom's [i suggest resurection remix]
9)Before Flasing do factory reset in wipe section and go for install zip in install section
10)now ur good to boot
Note
1)to copy zip to sdcard/ext-card our twrp recovery supports mtp enable while on recovery mode[open my computer there u can see mtp device]
2)if u want to process ruu only then click on adb sideload in advanced sections i think adb will detect the device as in recovery mode
3)then open ruu [i might think it will work]
3)i did nt test the above process
4)if u want the stock os only then download required stock zip and flash it...there r many stocks like europe,,asia .................................
5) Hope u Installed Sdk Manger If not so go for MINIMAL ADB AND FASTBOOT.EXE
At the Same Time U Better Take a look on this Thread Also http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817
Hope it might Helps
Thanks to XDA Developers Thanks To TWRP Recovery Thanks to Custom Roms
And Finally Thanks To My frnd Hareesh

Please Provide Micromax Canvas P666 Tab Stock or custom Rom

Hi
Please provide with working stock or custom ROM for Micromax p666 Tab. There is a stock ROM available online but it's firmware files are corrupted. My device is nearly bricked so plz help me out. Any working Android version will help.
Stock Rom P666 from bricked phone
Download Micromax_P666_V1_22.11.14 Micromax_P666_V1_22.11.14_(by_xdafirmware.com).zip
Install adb driver.
Install google android USB drivers (I did it by installing android studio, running sdk manager and choosing google usb driver). Once downloaded, you can copy that folder and uninstall android studio. Very long way. Surely google and find a short way
Manufacturing flash tool doesn't work. Search and download "Manufacturing Flash Tool.rar", which also has IntelAndroidDrvSetup1.2.0.exe and iSocUSB-Driver-Setup-1.0.2.exe. Now manufacturing flash tool will open in Windows (10 in my case).
Power Off. Press power+volUp+voDown, enter fastboot/droidboot mode. Driver Manager, select device and install Android fastboot driver (Second, not sure exact name).
Start Manufacturing Flash Tool. Select "flash.xml, (not sure why there is no button for me to proceed!!!). Enable logs and print fastboot commands.
Save printed fastboot commands to safe location. That is your bible!
Run fastboot commands in that order. You have stock rom.
Still trying to unlock bootloader, install custom recovery and root it. I need it to be rooted. Couldn't find a way so far.

Uninstalled wrong app, LG K61 stucks in boot

I have uninstalled with adb the google package manager on my device, now it does not boot up. Does anybody has an idea to bring it back?
P.s: In developer options I have unlocked usb debudding and oem unlock. I can not find the fastboot mode.
Reflash Stock ROM.
FYI:
Fastboot is merely an executable you can operate on device's bootloader once it got unlocked.
I have found this tutorial, is it right? There are also the firmware files I need on this side.
Thank you very much, I have managed it!
I did it with the great lgup utility and the firmware you can get you can find here (for my
LG Q630EAW).

Categories

Resources