Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Same problem here.
Same. Anyway solution so far?
vernel1008 said:
Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Click to expand...
Click to collapse
Only one idea: Delete Gadgetbride, restart your Phone, install Mi Fit-App, Switch your Phone language to english (If isn't) and try to install Firmware again.
HTH
I had the same problem, i was desperate and ready to throw it away, but i finally did what urs1956 said and it worked!! (Only thing is that i paired it with an other device at first).
i am the same probleme but juste uptdate firmware with mi fit... and black screen... bricked...
Nothing work.
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
jrebillard said:
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
Click to expand...
Click to collapse
Me. too
sleep in black screen.
My conversation with Amazfit/Huasmi
Molly (Amazfit)
Feb 10, 00:47 PST
Hello,
Thank you for contacting Amazfit.
We are very sorry that you have trouble with your device.
Have you ever flashed the ROM of your watch?
Can you please send us a screenshot of your watch screen?
If the screen turned off, please charge it to have a try.
If it doesn't work, please remove the device from the charger, put it on the table, make it untouched for 24-48 hours to let the battery drains and then charge it to see if it solves the issue.
If your issue persists, please get touch with the seller to return the device to have it examined.
Thank you for your understanding!
Sincerely,
Molly | Amazfit Support
Feb 9, 16:19 PST
Amazfit BIP bricked after firmware update: Hi,
I did a firmware update which apparently failed as since then the watch will show a black screen only.
The watch is discoverable in the android bluetooth settings, however, I cannot pair or connect to it.
Is there any way of "forcing" an update via bluetooth?
Kind regards
That same answer from support.
wait for battery drains and then charge it << Not resolve this problem.
I'm wait sinc Last month until now. It's sleeping.
https://amazfitwatchfaces.com/cor/
any news?
Hello,
i have a bricked Amazfit BIP so i decided to open it up.
I saw there is a Winbond 25Q64FWIQ flash onboard, so i'm wondering if anyone has a flash dump to try to reflash mine with a chip programmer
Hi,
i used the App Notify and Fitness - and update the language Paket on my Watch. After connect to the Mifit App, the language Pack was updatet again. After that, the Display from the watch shows a blank Screen with flashes up sometimes.
An update with other firmware - and back to the original Firmware with Ressources and Language Pack doesn't work.
Here is an video, that shows the flashes on Display.
Who can help me???
I can't post a link.
youtube + com / watch?v=BVqoI0WP9Ow
(+=.)
It seems like the watch is constantly rebooting or sth similar (I don't own a bip). Unless it boots into a stable state where you can connect on it through bluetooth to push an update, I don't think you can fix it (at least not without performing a surgery).
Is It connecting to phone over bluetooth?
Hello,
I have amazfit GTR and recently I've bought Huawei P40 pro.When I've installed amazfit app on it,paired the watch I saw that there is graphic issue on the watch after synching.
Do you know how to solve this issue?
Did somebody have this problem?
Maybe installing the last or new firmware does help?
How to do it? I've made factory resset on the clock maybe 3 times and reinstalled the amazfit app 2-3 times and nothing changed.
Spellbound_91 said:
How to do it? I've made factory resset on the clock maybe 3 times and reinstalled the amazfit app 2-3 times and nothing changed.
Click to expand...
Click to collapse
Hello, i don't have a Huawei, so i do not understand why you have this problem.
Updating is maybe possible via the Amazfit app, i thought there was an option somewhere in the app.
But if not, then i am sorry and cannot help you.
Hey everybody,
i have similar issue with the GTR 47 mm - suddenly the watch failing to update fonts and in constant loop of "check for updates in app" and "failed to update font library". so i can't use it anymore. Tried to update the firmware (including base resources, rescources and GPS) with fonts and fonts only - with "notify fitness app" - but getting the same result. the only thing that i can manage to perform with watch is to unpair, then reset to factory and pair again with amazfit app. Tried all kinds of firmware and fonts versions.
Can someone please guide me what to do? is it possible to solve this issue at all? Or my watch is already bricked?
Thank you for help
Hi everybody. I need some help..
I was update my Verge Lite on Notify and Fitness app. I dont know how it happened but it couldnt finish update. I tried 3 times for update again but it couldnt. Then i deleted mi fit, Amazfit app and Notify&fitness app for try again but after install all apps i have a big problem..
Mifit or Amazfit offical app recognize my watch but it failed to try pair. There is some note in Turkish like factory reset. But i cant pair with offical apps. And on the watch screen i can see only "Please open the app and select check for updates on the watch pageto continue update". Also notify&fitness can pair but there is 2 ways i have to do for work Notify&fitness. First way pair with offical app (i cant do this) and the other option is auth key for "no mifit app" option. I searched for that but i think there is one way for find the auth key is ''freemyband''. Freemyband wants pair with an offical app. I cant pair with offical app how can i do that?
I'm lost Please help me. I dont want buy a new watch.. Thank you all and sorry for my bad english
Edit: I fixed my verge lite with helps of @Fardeenansari21. We worked on so much but it was very easy. If your Verge Lite bricked like mine just put into charge dock while pressing button and it will open again.
Hi @10ore, good morning from Spain.
I've got a Verge Lite chinese version and i'm looking for a firmare or trick to get it in English or Spanish. Is it possible? Do yo know how?
In fact I could load a global version and the watch connected with the Amazfit app but a "Please open the app and select check for updates on the watch page to continue update" message appeared. With your proposed solution, I could put into charge and press the button to move between options (in English!!!!) but i haven't found a solution to avoid this semi-bricked message yet. Can you help me? Do you know any solution?
Also, if I connect the watch with the official Amazfit app, it updates de firmware to the lastest official version and the message "Please open the app and select ..... continues forever....
Thank you very much in advance.
txelu.
My firmware and resources library got Zepp updated this morning to firmware v1.3.6.05, now my amazfit gtr47 crashes when I swipe down to enter watch settings, then reboots.
Everything else works fine.
Please help.