Root your LG G Watch (W100) with Magisk!
Things You Will Need
Magisk-vXX.zip from this thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
TWRP with squashfs support from here (Credits to: Xmaster24): http://www.mediafire.com/download/apwtscp0tn0y8qd/twrp-3.0.0-0-dory+squashfs.img
My custom ZIP file that flashes Magisk manager v4.3.1 apk & local.prop file: https://mega.nz/#!QvphGIbS!LIFsKzN5RxBRvMuwFGNGCa56XruMqut92tjfDO82RDE
Things You Will Need If You Mess up
Magisk-uninstall-XX.zip from this thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
TWRP with squashfs support from here (Credits to: Xmaster24): http://www.mediafire.com/download/apwtscp0tn0y8qd/twrp-3.0.0-0-dory+squashfs.img
Default boot.img if magisk-uninstall-XX.zip doesn't work: https://mega.nz/#!rxQ1EIDI!0ytWk965bt5KqSBuhMT4vbgD3dxO_qRyiN0LeAV4MrI
Guide
Step 1. (If your bootloader is already unlocked skip to Step 3.) Enable Developer Options On Watch: Settings->About->Tap Build number 7 times->Settings->Developer Options->ADB Debugging->Enable It
Step 2. Plug watch into cradle and usb plug into PC, make sure you have adb and fastboot
Step 3. run
Code:
adb reboot bootloader
watch may ask to allow debugging from this PC either allow or always allow.
Step 4. Once in the bootloader run
Code:
fastboot boot "twrp-3.0.0-0-dory+squashfs.img"
Step 5. run
Code:
adb push Magisk-vXX.zip /sdcard/
and
Code:
adb push dory-localprop-and-magisk-manager.zip /sdcard/
Step 6. In TWRP click Install-> Install ZIP -> Scroll Down -> Select Magisk-vXX.zip -> Tick button -> Swipe to flash -> When finished click the back key ->
Step 7. Install ZIP -> Select dory-localprop-and-magisk-manager.zip -> Tick button -> Swipe to Flash
Step 8. Reboot System button -> Swipe to confirm don't worry abot no OS error.
Step 9. Open Magisk Manager App -> Click Hamburger Menu (three lines) -> Scroll Down to Settings (Labelled Setti on small screen) -> Click it
Step 10. Scroll Down -> Enable Magisk Hide
Tip
Scroll Down in Magisk Manager settings and change "Automatic Response" to "grant" whenever you want to use root and "deny" when you don't. This is because the prompt window is designed for phones and is too big.
Guide for If you messed up or want to unroot
Step 1. run
Code:
adb reboot bootloader
Step 2. once bootloader is there run
Code:
fastboot boot "twrp-3.0.0-0-dory+squashfs.img"
Step 3. once booted into TWRP
Code:
adb push magisk-uninstall-XX.zip /sdcard/magisk-uninstaller.zip
Step 4 Go to install
Step 5. Install ZIP -> Scroll Down -> Select magisk-uninstaller.zip -> Tick button -> Swipe to flash
Step 6. Want to be rooted? Follow Original Guide from Step 6, if not follow Step 7 and onward
Step 7. While still in recovery run
Code:
adb shell "rm /data/local.prop"
Step 8. run
Code:
adb reboot
Step 9. Once back into the system run
Code:
adb uninstall com.topjohnwu.magisk
Step 10. Done.
Hahha this is what I love about this! You can do it because you can.
I'll dig up my G Watch and unlock the bootloader.
Why should I root my watch?
Theking3737 said:
Why should I root my watch?
Click to expand...
Click to collapse
There's no reason really, I just managed to get magisk to work on an android wear device as a proof of concept and wanted to share it.
Theking3737 said:
Why should I root my watch?
Click to expand...
Click to collapse
adjust kernel settings with kernel aduitor?
Nice, I thought about doing this myself but unfortunately my g watch met an untimely demise, I still update SuperSU tho since I know that works fine and didn't need to test it first. Good to see someone is still keeping this watch alive!
BTW this method should work on all watches, SuperSU does anyway.
i got it rooted well it sasy tis is but i want to change the bootanimation to match my PN one i have the file pushed to the watch but i cant put it in the /system/mesia location it says its read-only. can you help me with that thanks
Would this work on a other android wear watch? Like Sony smartwatch 3? Or is it trial and error?
Help me please . I'm a user from China and now my watch doesn't work anymore. The thing is, I didn't use it for a couple of months, now it just can't charge. When I Link it to my computer,the gwatch recovery tool can't find my devices. what should I do . Plz
Hey the op should be updated to say use magisk v12 as magisk 13+ requires manager 5+ to work
This also works on ZenWatch2 running latest AW2 update
Does this mean we can also use Magisk to change system-level things, such as boot animation?
Will this work on the LG Watch Urbane 2nd Edition LTE (W200A) and does android pay work with Magisk installed?
Post removed
Thanks @TheDevFreak.
It still works. I tried with Latest Magisk Version v15.3 & APK - 5.5.5.
Note: In the app, you have to set Automatic response to Grant under Settings. Because Root Access dialog not showing properly to click Grant button.
svprm said:
Thanks @TheDevFreak.
It still works. I tried with Latest Magisk Version v15.3 & APK - 5.5.5.
Note: In the app, you have to set Automatic response to Grant under Settings. Because Root Access dialog not showing properly to click Grant button.
Click to expand...
Click to collapse
The note you noted has been in the OP since I made it
Here's a tip if you can't reach the settings menu of magisk: Activate the zooming option in the system setting. On my TicWatch I have to tap three times and it will zoom to the tapped area. By that I was able to reach the settings menu.
Does this also works on Magisk 17？
Theking3737 said:
Why should I root my watch?
Click to expand...
Click to collapse
So you can extract the watch faces and share them with us
Hello,
The mega link for Magisk manager v4.3.1 apk & local.prop does not work anymore
Would someone have another link ?
Thanks
Before starting (if you have SM-G973F NEE, you can use my prepatched/generated files and save 2 million years in preparation, see the guide at the bottom of this page):
1. Root and flash Magisk: https://topjohnwu.github.io/Magisk/samsung
Note: remember to use the button combination when booting/rebooting, and also remember to use internet when compleeting the android wizard when it runs.
2. Flash TWRP: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Note: remember to use the button combination when booting/rebooting.
3. Create your SmaliPatch: https://forum.xda-developers.com/apps/magisk/module-smali-patcher-0-7-t3680053
Note: ALSO check "Magisk Reboot (Galaxy S10)". Keep the default checks.
4. Install generated SmaliPatch in Magisk and then reboot.
The actual guide:
Note - again: remember to use the root button combination when booting. Yes, this might be solved by our SmaliPatch, but i would´t trust it when going out of TWRP and so on, so to be on the safe side, always use this combination.
1. Download and install F-droid: https://f-droid.org/FDroid.apk
2. In F-droid, install "Amaze (Manage local files)", and "Termux".
3. In Amaze: Go to settings and check "Root Explorer" under Advanced. Grant root for Amaze in Magisk.
4. Download and install "Aurora Store": https://androidfilehost.com/?fid=1395089523397955190
5. In Aurora Store, install: "Titanium Backup"
6. Download NanoDroid: https://downloads.nanolx.org/NanoDroid/Stable/
Or download the one I flashed here (and skip step 7, 8 and 9): https://mega.nz/#!rrIXSSLZ!4dV5Qx1W0hJXFbnY8heYcAUmOEWmkgdzcnfb2DhtRgo
7. Open the downloaded file with 7zip (right-click, 7zip, Open archive), and right-click on ".nanodroid-setup" and click on Edit
8. Change "nanodroid_gmscore=0" to "nanodroid_gmscore=1". This is to install MicroGs original GMSCore, and not NanoDroids (which is good, but did not work 100% this time). Documentation on alter installation can be found here: https://github.com/Nanolx/NanoDroid/blob/master/doc/AlterInstallation.md
9. Save and close ".nanodroid-setup", and 7-zip should ask you if you want to update the changes in the archive. Click yes. If this does not work for some reson, just drag ".nanodroid-setup" to the desktop, modify it, save, and drag it back.
10. Copy your modified NanoDroid zip into your phone (Download folder).
11. In Amaze: copy your NanoDroid zip in the Download folder to "/data/". This is to be able to access this file from TWRP later.
12: Debloat: run debloat.bat. This script keeps the launcher and a few other things. It keeps the apps that i think is the most essential, but removes Samsung Health for example. You can modify if you know what you want and how to do it.
Download here: https://mega.nz/#!62YHFSaS!di_HY7ceHMgfKyRfpTOnLgFoviWub0MCojrLyH4Jnho
13. In Titanium: uninstall "Play Services" and GMS, and GMS policy-something (don´t remember the package name, but search for gms). Titanium might seem to "hang" on uninstalling some of these apps, if so, just reboot and continue. This is normal.
SINCE I FORGOT THE PACKAGE NAMES, CAN SOMEONE PLEASE SEND ME A SCREENSHOT OF THE ONES THAT APPEARS WHEN SEARCHING ON "gms"? I will update this guide when i know what the exact names are.
14. In Amaze: click Root(/) in the menu, go to "/system/priv-app/", remove these dirs: GMSCore, GoogleServicesFramework, Phonesky
15. Reboot into TWRP, mount "/system" and "/data". Flash your NanoDroid file located in "/data/". Do not wipe cache. Reboot to get out of TWRP.
16. Launch "MicroG Settings". Click on permissions warning, and let Android get all permissions it asks for. Then click on "Google device registration" and turn ON (check). Do the same for "Google Cloud Messaging".
17. Still in "MicroG Settings" app: Click on "UnifiedNlp Settings", then on "Configure location backends", then check the checkbox (allow location permission if prompted). Do the same for "Configure address lookup backends".
18. Open the terminal that you installed in step 5, and run this:
Code:
su
Grant root access if prompted, otherwise, to go magisk and grant root for "shell".
19. Run these commands:
Code:
pm grant com.google.android.gms android.permission.ACCESS_FINE_LOCATION
pm grant com.google.android.gms android.permission.ACCESS_COARSE_LOCATION
20. In Aurora Store: install "push notification checking-fix" and run. Run the new installed app, then click "Confirmation".
21. Go to "MicroG Settings" again, click on "Google Cloud Messaging", check if "Current State" is NOT disconnected (something "connected" is good). Not connected? Reboot and do step 20 again.
22. Install Afwall and lock your sh*t down.
In AFwall, I also go to "Preferences", then "Experimental", click on "Startup directory path for script", then click on "/system/etc/init.d/", then click on "Fix startup data leak".
AFWall documentation on what to block/allow: https://github.com/ukanth/afwall/wiki/System-Applications-to-block-or-allow
Congrats, you are now in privacy heaven!
For SM-G973F NEE (nordic):
Prepatched Magisk, TWRP and SmaliPatch for and other files can be downloaded here: https://mega.nz/#F!LjQ0HYqR!2X72CW1kp3zh2kBxWDwG6A
These are the files that i used.
The prepatched Magisk image is based on "SM-G973F_1_20190417080614_xq2zehce6z_fac", downloaded with SamFirm.
REMEMBER THIS AFTER FLASHING PREPATCHED MAGISK:
(Powering up normally) → (System with no Magisk)
(Power + Bixby + Volume Up) → (Bootloader warning) → (Release all buttons) → (System with Magisk)
(Power + Bixby + Volume Up) → (Bootloader warning) → (Keep holding volume up) → (Actual recovery)
Quick guide to root, install Magisk, TWRP and SmaliPatch:
1. Unlock bootloader: https://www.androidexplained.com/galaxy-s10-unlock-bootloader/
2. Flash prepatched Magisk: https://mega.nz/#!2uRHkKCR!0j3Bx6iKbNL7yxqWHFBoAD7SpSGsvrrLdfIdJb73Hbk
BE READY FOR AUTO REBOOT (if you did not uncheck it in Odin)
3. Go directly to recovery and do a factory reset
4. Reboot, and be ready for one more auto reboot after the samsung logo!
5. Finish the android wizard WITH internet
6. Reboot again
7. Open Magisk (will be added after a while automatically), it will ask to finish the Magisk installation, click yes, be ready for automatic reboot
8. In Magisk install (as module): https://mega.nz/#!KzZRmQLS!ClmDmFAgaKd10o8hfjgmvI3PEdf3GCsV0lZKLtYPhFo
9. Reboot
10. Flash TWRP: https://mega.nz/#!72BFiQIK!yCVddqBDgPrBPlMNr6Y9x1OBNWpD3JBxmyf57D3eOAY
11. Follow the actual guide above
Please me feedback on what to make better. I want everybody to be able to get their privacy back!
Credits to:
topjohnwu for Magisk
Geiti94 and ianmacd for TWRP
fOmey for Smali Patcher
Nice to see development for the S10 - maybe you should move the post to the ROMS, Kernel, Recoveries Section.
As for improvements:
First that pops to mind, maybe you should credit the people who made Root, TWRP & Smali.
Second, which Pie version (ASD5)??
Third, maybe some pics.
Norup58 said:
Nice to see development for the S10 - maybe you should move the post to the ROMS, Kernel, Recoveries Section.
As for improvements:
First that pops to mind, maybe you should credit the people who made Root, TWRP & Smali.
Second, which Pie version (ASD5)??
Third, maybe some pics.
Click to expand...
Click to collapse
Thanks for your feedback. I have added credits and firmware information.
I wanted to post in dev, but I was not allowed due to too few posts.
Great work! I am about to take my privacy back as well but I have some questions:
- Will the same method work by flashing microg packages from official project, instead of flashing the nanodroid package you mention?
- Is it possible to encrypt /data folder and lock bootloader, so if telephone gets stolen there is no way they access your data?
- How do you handle OTA updates? Do you need to run the above guide every new OTA update?
Thanks!
dklearhos said:
Great work! I am about to take my privacy back as well but I have some questions:
- Will the same method work by flashing microg packages from official project, instead of flashing the nanodroid package you mention?
- Is it possible to encrypt /data folder and lock bootloader, so if telephone gets stolen there is no way they access your data?
- How do you handle OTA updates? Do you need to run the above guide every new OTA update?
Thanks!
Click to expand...
Click to collapse
Sorry for a late response.
Good on you! Since you asked almost a month ago, I guess you have already proceeded? In that case, what did you do?
Well, this was an early way to take your privacy back for s10, but time has changed and new ways seems to be avaliable now.
For one, there is a custom rom out there that use Aroma to debloat, but I don't know if it removes g stuff (I asked but the answer was vague, to say at least).
The other thing is that the encryption stuff has been improved too, and other things that makes the root easier to live with. Like updates that you mentioned (maybe not ota, but not custom rom updates with latest security patches).
I will have to take a look at this soon, because the way described in the main thread is causing some problems with WiFi and Bluetooth. Not unusable but my watch and headphones has to be re-paired every time I reboot the phone. And no updates. Except for that, I have been very pleased with my setup the last months.
I will make a new thread or update this when I know the steps to take our privacy back with the new roms and what not. Wish you all luck until then!
petriusus said:
Before starting (if you have SM-G973F NEE, you can use my prepatched/generated files and save 2 million years in preparation, see the guide at the bottom of this page):
1. Root and flash Magisk: https://topjohnwu.github.io/Magisk/samsung
Note: remember to use the button combination when booting/rebooting, and also remember to use internet when compleeting the android wizard when it runs.
2. Flash TWRP: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Note: remember to use the button combination when booting/rebooting.
3. Create your SmaliPatch: https://forum.xda-developers.com/apps/magisk/module-smali-patcher-0-7-t3680053
Note: ALSO check "Magisk Reboot (Galaxy S10)". Keep the default checks.
4. Install generated SmaliPatch in Magisk and then reboot.
The actual guide:
Note - again: remember to use the root button combination when booting. Yes, this might be solved by our SmaliPatch, but i would´t trust it when going out of TWRP and so on, so to be on the safe side, always use this combination.
1. Download and install F-droid: https://f-droid.org/FDroid.apk
2. In F-droid, install "Amaze (Manage local files)", and "Termux".
3. In Amaze: Go to settings and check "Root Explorer" under Advanced. Grant root for Amaze in Magisk.
4. Download and install "Aurora Store": https://androidfilehost.com/?fid=1395089523397955190
5. In Aurora Store, install: "Titanium Backup"
6. Download NanoDroid: https://downloads.nanolx.org/NanoDroid/Stable/
Or download the one I flashed here (and skip step 7, 8 and 9): https://mega.nz/#!rrIXSSLZ!4dV5Qx1W0hJXFbnY8heYcAUmOEWmkgdzcnfb2DhtRgo
7. Open the downloaded file with 7zip (right-click, 7zip, Open archive), and right-click on ".nanodroid-setup" and click on Edit
8. Change "nanodroid_gmscore=0" to "nanodroid_gmscore=1". This is to install MicroGs original GMSCore, and not NanoDroids (which is good, but did not work 100% this time). Documentation on alter installation can be found here: https://github.com/Nanolx/NanoDroid/blob/master/doc/AlterInstallation.md
9. Save and close ".nanodroid-setup", and 7-zip should ask you if you want to update the changes in the archive. Click yes. If this does not work for some reson, just drag ".nanodroid-setup" to the desktop, modify it, save, and drag it back.
10. Copy your modified NanoDroid zip into your phone (Download folder).
11. In Amaze: copy your NanoDroid zip in the Download folder to "/data/". This is to be able to access this file from TWRP later.
12: Debloat: run debloat.bat. This script keeps the launcher and a few other things. It keeps the apps that i think is the most essential, but removes Samsung Health for example. You can modify if you know what you want and how to do it.
Download here: https://mega.nz/#!62YHFSaS!di_HY7ceHMgfKyRfpTOnLgFoviWub0MCojrLyH4Jnho
13. In Titanium: uninstall "Play Services" and GMS, and GMS policy-something (don´t remember the package name, but search for gms). Titanium might seem to "hang" on uninstalling some of these apps, if so, just reboot and continue. This is normal.
SINCE I FORGOT THE PACKAGE NAMES, CAN SOMEONE PLEASE SEND ME A SCREENSHOT OF THE ONES THAT APPEARS WHEN SEARCHING ON "gms"? I will update this guide when i know what the exact names are.
14. In Amaze: click Root(/) in the menu, go to "/system/priv-app/", remove these dirs: GMSCore, GoogleServicesFramework, Phonesky
15. Reboot into TWRP, mount "/system" and "/data". Flash your NanoDroid file located in "/data/". Do not wipe cache. Reboot to get out of TWRP.
16. Launch "MicroG Settings". Click on permissions warning, and let Android get all permissions it asks for. Then click on "Google device registration" and turn ON (check). Do the same for "Google Cloud Messaging".
17. Still in "MicroG Settings" app: Click on "UnifiedNlp Settings", then on "Configure location backends", then check the checkbox (allow location permission if prompted). Do the same for "Configure address lookup backends".
18. Open the terminal that you installed in step 5, and run this:
Grant root access if prompted, otherwise, to go magisk and grant root for "shell".
19. Run these commands:
20. In Aurora Store: install "push notification checking-fix" and run. Run the new installed app, then click "Confirmation".
21. Go to "MicroG Settings" again, click on "Google Cloud Messaging", check if "Current State" is NOT disconnected (something "connected" is good). Not connected? Reboot and do step 20 again.
22. Install Afwall and lock your sh*t down.
In AFwall, I also go to "Preferences", then "Experimental", click on "Startup directory path for script", then click on "/system/etc/init.d/", then click on "Fix startup data leak".
AFWall documentation on what to block/allow: https://github.com/ukanth/afwall/wiki/System-Applications-to-block-or-allow
Congrats, you are now in privacy heaven!
For SM-G973F NEE (nordic):
Prepatched Magisk, TWRP and SmaliPatch for and other files can be downloaded here: https://mega.nz/#F!LjQ0HYqR!2X72CW1kp3zh2kBxWDwG6A
These are the files that i used.
The prepatched Magisk image is based on "SM-G973F_1_20190417080614_xq2zehce6z_fac", downloaded with SamFirm.
REMEMBER THIS AFTER FLASHING PREPATCHED MAGISK:
(Powering up normally) → (System with no Magisk)
(Power + Bixby + Volume Up) → (Bootloader warning) → (Release all buttons) → (System with Magisk)
(Power + Bixby + Volume Up) → (Bootloader warning) → (Keep holding volume up) → (Actual recovery)
Quick guide to root, install Magisk, TWRP and SmaliPatch:
1. Unlock bootloader: https://www.androidexplained.com/galaxy-s10-unlock-bootloader/
2. Flash prepatched Magisk: https://mega.nz/#!2uRHkKCR!0j3Bx6iKbNL7yxqWHFBoAD7SpSGsvrrLdfIdJb73Hbk
BE READY FOR AUTO REBOOT (if you did not uncheck it in Odin)
3. Go directly to recovery and do a factory reset
4. Reboot, and be ready for one more auto reboot after the samsung logo!
5. Finish the android wizard WITH internet
6. Reboot again
7. Open Magisk (will be added after a while automatically), it will ask to finish the Magisk installation, click yes, be ready for automatic reboot
8. In Magisk install (as module): https://mega.nz/#!KzZRmQLS!ClmDmFAgaKd10o8hfjgmvI3PEdf3GCsV0lZKLtYPhFo
9. Reboot
10. Flash TWRP: https://mega.nz/#!72BFiQIK!yCVddqBDgPrBPlMNr6Y9x1OBNWpD3JBxmyf57D3eOAY
11. Follow the actual guide above
Please me feedback on what to make better. I want everybody to be able to get their privacy back!
Credits to:
topjohnwu for Magisk
Geiti94 and ianmacd for TWRP
fOmey for Smali Patcher
Click to expand...
Click to collapse
Make a rom with all these mods via Superr's Kitchen and post it at Roms.
ExtremeGrief said:
Make a rom with all these mods via Superr's Kitchen and post it at Roms.
Click to expand...
Click to collapse
Yes, that would be awesome.
Do you know if my rom would only be work with phones with the same firmware that i am using?
Sorry, but what benefits actually does this provide?
FlatOutRU said:
Sorry, but what benefits actually does this provide?
Click to expand...
Click to collapse
Taking back privacy or making a rom?
@petriusus
Thanks for the guide. Privacy is becoming more and more of a luxury these days.
petriusus said:
Taking back privacy or making a rom?
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------
Does this method allow one to still use the Stock Samsung OS, or, does this involve using a Custom ROM? Thanks for your time.
CommanderSozo said:
----------------------------------------------------------------------------------------------
Does this method allow one to still use the Stock Samsung OS, or, does this involve using a Custom ROM? Thanks for your time.
Click to expand...
Click to collapse
It's all on stock.
Keule-T said:
It's all on stock.
Click to expand...
Click to collapse
---------------------------------------------------------------------
Ok. I'm new to all of this - could I follow the same steps for a Samsung Galaxy Note 9 SM-N960F/DS model to achieve the same Privacy while being able to use Samsung One UI combined with full S-Pen functionality? If this is possible and just so I am on the same page, I could also completely remove GAPPS/Google Play Services and replace with MicroG? If the method to achieve this is different on a Note 9, do you know if there are any Instructions? Thanks again.
CommanderSozo said:
---------------------------------------------------------------------
Ok. I'm new to all of this - could I follow the same steps for a Samsung Galaxy Note 9 SM-N960F/DS model to achieve the same Privacy while being able to use Samsung One UI combined with full S-Pen functionality? If this is possible and just so I am on the same page, I could also completely remove GAPPS/Google Play Services and replace with MicroG? If the method to achieve this is different on a Note 9, do you know if there are any Instructions? Thanks again.
Click to expand...
Click to collapse
It should all be the same. For specifics have a look in the N9 forum (I don't own one, so for specific steps I can't help).
@petriusus
Long time since last post - so I have not found that and start a simular thread. Sorry for that.
Debloated stock -without Google apps- for best performance/privacy
One word ahead: I am a huge fan of Custom Rom (LOS). Nevertheless some feature will be missed (volte) and performance might be not perfect (camera, dolby) due to proprietary firmware. On the other hand I like to keep away from data collecting...
forum.xda-developers.com
I am wondering whether you have done updates from the initial Android 9? Bringing Magisk/TWRP to the device is rather complex, so how all that behaves in terms of security updates. How to spoof a A11?
works on PixelExperience Android Q,
you need to check all other roms yourself, please check and comment in your own responsibility. I am not responsible for any damage to the phone
This mod will not work on MIUI !!!
"older version of Android" is a normal message and it is not an error !
_______________________________________________________________________________________________________________________________________________________________
you need min. Magisk v20.1
_______________________________________________________________________________________________________________________________________________________________
REQUIRED FILES HERE !!
_______________________________________________________________________________________________________________________________________________________________
[NEW xx.xx.2020]
1. Insall Magisk SELinux Manager: choose permisive mode
2. Download and install [Q-10]Dolby Digital Plus_v.7.2-[MMT Ex]-20200222.zip
3. install Audio Modification Lib, Dont open dolby you need reeboot your device first !!
!! Dolby app crashing after you change main settings or when you turn off/on but working propetly
Tested on latest Android Q pixel experience ROM
_______________________________________________________________________________________________________________________________________________________________
[OLDER ROMS xx.xx.2019]
To install Dolby on your Mi 8 you need to follow this steps:
1. Magisk SELinux Manager: choose permisive mode
2. Audio Compat Patch
3. Audio Modification Lib, now reboot your device
4. download [Q-10]Dolby Digital Plus_v.6.8-[UNiTY][Light]_by_repey6-20191212.zip form this post LINK ,
and install via Magisk manager ,Dont open dolby you need reeboot your device first !!
_______________________________________________________________________________________________________________________________________________________________Thanks for @repey6 for Dolby Android Q ver
İs it work with eu last beta?
read post again please okay? all are there
Followed exactly the steps you mentioned and dolby app crashes for me on pixel experience android Q
Crashes on Q. "...for older version of Android"
speedgeil said:
Crashes on Q. "...for older version of Android"
Click to expand...
Click to collapse
i install this on android Q without any problem and working fine
mmvxky said:
i install this on android Q without any problem and working fine
Click to expand...
Click to collapse
Followed the steps exactly as described. It crashes with "...for older versions of android". The pixel rom 2019-12-25, Magisk 20.3
speedgeil said:
Followed the steps exactly as described. It crashes with "...for older versions of android". The pixel rom 2019-12-25, Magisk 20.3
Click to expand...
Click to collapse
Me too, i using Evolution x 3.4 and crashing app. İts a log;
https://del.dog/asapepunux
Its working to me dolbt and viper, thanks.
Flash audio comparability file and Dolby in magisk
Reboot
Flash audio modification library in magisk and reboot.
But I think dual speaker mod is deactivated
gabwielcastwo said:
Its working to me dolbt and viper, thanks.
Flash audio comparability file and Dolby in magisk
Reboot
Flash audio modification library in magisk and reboot.
But I think dual speaker mod is deactivated
Click to expand...
Click to collapse
Which rom do you use?
gabwielcastwo said:
Its working to me dolbt and viper, thanks.
Flash audio comparability file and Dolby in magisk
Reboot
Flash audio modification library in magisk and reboot.
But I think dual speaker mod is deactivated
Click to expand...
Click to collapse
What version magisk are you using?
I read somewhere that dolby started crashing after updating to magisk 20 and that version 19.3 works fine
Will test out later
Everything works well on Havoc OS. Installation done as in OP described (Magisk 20.3). Thanks a lot for explanation.
If phone already has an audio eq app prebuilt do I need to follow any different steps?
I managed to install it but app doesnt work in the background if i quit it says remote service has stopped and stops how can i fix it
Works on AOSPA(Paranoid)
Doesn't works on Stock with weekly updates.
Dolby always forced close. First start Dolby messages : warning, it is an older version...
hi bro
How to raise the volume of the call
Because her voice is very weak
Android 10 mi mix rom
Sent from my MI 8 using Tapatalk
Work's in my case. Thanks a lot!
I have latest havoc build.
UPDATE !!
mmvxky said:
works on PixelExperience Android Q,
you need to check all other roms yourself, please check and comment in your own responsibility. I am not responsible for any damage to the phone
This mod will not work on MIUI !!!
"older version of Android" is a normal message and it is not an error !
_______________________________________________________________________________________________________________________________________________________________
you need min. Magisk v20.1
_______________________________________________________________________________________________________________________________________________________________
[NEW xx.xx.2020]
1. Insall Magisk SELinux Manager: choose permisive mode
2. Download and install [Q-10]Dolby Digital Plus_v.7.2-[MMT Ex]-20200222.zip
3. install Audio Modification Lib, Dont open dolby you need reeboot your device first !!
!! Dolby app crashing after you change main settings or when you turn off/on but working propetly
Tested on latest Android Q pixel experience ROM
_______________________________________________________________________________________________________________________________________________________________
[OLDER ROMS xx.xx.2019]
To install Dolby on your Mi 8 you need to follow this steps:
Download all 3 files from this folder and respectively install using Magisk:
1. Magisk SELinux Manager: choose permisive mode
2. Audio Compat Patch
3. Audio Modification Lib
now reboot your device
download [Q-10]Dolby Digital Plus_v.6.8-[UNiTY][Light]_by_repey6-20191212.zip form this post LINK ,
and install via Magisk manager ,Dont open dolby you need reeboot your device first !!
_______________________________________________________________________________________________________________________________________________________________
Thanks for @repey6 for Dolby Android Q ver
Click to expand...
Click to collapse
UPDATE !!!
Can confirm it works on (Q) The Pixel Rom R26 in Background (Remote Service has stopped)