Related
After a lot of reading, learning, trial, and error I am excited to be able to finally post my first rom for the Samsung Galaxy Tab Pro 10.1 WiFi (SM-T520).
GigaWatts Pro v1.0
Stock T520UEUAND1 base
De-odexed
Debloated
Rooted with SuperSU v1.99
Busybox
Zipaligned
Init.d support
Knoxless
Permissions have been modified to allow writing to external SD card.
Aroma Installer lets you choose between the stock kernel and the Cybertronics Kernel.
Thanks to Chainfire for his SuperSU and CF-Auto Root.
Thanks to Amarullz for his Aroma Installer.
Download Here
android.process.acore has stopped working, Wifi works with the stock kernel, Thanks you your hardwork:good:
How debloated is this version? As in comparable to [ROM][SM-T520-WiFi] DeBloated - Rooted -DeOdex - Knoxless-TMFRST1S from ik4evr2?
Does this rom have German language included?
Gesendet von meinem SM-T520 mit Tapatalk
Getting "process android.process.media has stopped". Press ok and get a bootloop
EDIT - after another go, I'm getting "application installer has stopped". click ok and error keeps coming back.
ChilliBo said:
Does this rom have German language included?
Gesendet von meinem SM-T520 mit Tapatalk
Click to expand...
Click to collapse
you have to edit
language.xml in
/system/csc
I did this for Dutch-language
<SamsungMobileLanguage>
<Country>USA</Country>
<CountryISO>en</CountryISO>
<SalesCode>XAR</SalesCode>
<LanguageSet>
<Display>
en_US;en_GB;es_US;es_ES;zh_HK;zh_CN;fr_CA;fr_FR;ko_KR;nl_NL; </Display>
<Input>
<SupportList></SupportList>
<EnableList></EnableList>
</Input>
</LanguageSet>
</SamsungMobileLanguage>
You can choose Your language. For me it worked.
---------- Post added at 06:43 PM ---------- Previous post was at 06:33 PM ----------
---------- Post added at 07:31 PM ---------- Previous post was at 06:43 PM ----------
Very nice to see You got it done.
Please go on.
On this moment I use KOT59H-T520XXUANAE.
Will this be the next build of You? That would be very nice.
End of this week I can install Yor build and hope It wiil work on my sm-t520 EU.
The build he is using is actually the newest, the ND1.
The build you use is from Januari if I am right.
But thr kernel source of cybers kernel is from the same build as the rom you are cuttently using XXUANAE.
Have only seen a NA build of the kernel source of xxUEUAND1 and not a EU or WW version when you check the files of the source and how to build it.
It about a usacwifi version....
Sent from my SM-T520 using Tapatalk
RagingHarry said:
The build he is using is actually the newest, the ND1.
The build you use is from Januari if I am right.
But thr kernel source of cybers kernel is from the same build as the rom you are cuttently using XXUANAE.
Have only seen a NA build of the kernel source of xxUEUAND1 and not a EU or WW version when you check the files of the source and how to build it.
It about a usacwifi version....
Sent from my SM-T520 using Tapatalk
Click to expand...
Click to collapse
So this is only for NA version of T520?
Downloading now, I'll give it a spin and report back.
Sent from my SM-T520 using XDA Premium HD app
process android.process.media
jonlad1 said:
Getting "process android.process.media has stopped". Press ok and get a bootloop
EDIT - after another go, I'm getting "application installer has stopped". click ok and error keeps coming back.
Click to expand...
Click to collapse
I am working on fixing these bugs. Any help from someone who knows would be appreciated.
TheEvilVirus said:
How debloated is this version? As in comparable to [ROM][SM-T520-WiFi] DeBloated - Rooted -DeOdex - Knoxless-TMFRST1S from ik4evr2?
Click to expand...
Click to collapse
It is not as debloated as ik4ev2 rom. The next version will let the user pick and choose through the aroma installer which samsung and google apps they want to keep and which ones they do not want.
jonlad1 said:
So this is only for NA version of T520?
Click to expand...
Click to collapse
Nope, it was about sources and how old they are.
Original kernel is just for everyone as it was with the rom and compatible
Cyber's kernel is build of an older source then ND1
ND1 kernel source is only available in the NA version atm, were as we could ask Samsung to release a worldwide or European version of it.
As asked "Will this be the next build of You? That would be very nice."
that would mean are you going to build the next from an older release.
As for samsung build release names ND1 comes after NAE just like in the alfabet, the D comes after A.
RagingHarry said:
The build he is using is actually the newest, the ND1.
The build you use is from Januari if I am right.
But thr kernel source of cybers kernel is from the same build as the rom you are cuttently using XXUANAE.
Have only seen a NA build of the kernel source of xxUEUAND1 and not a EU or WW version when you check the files of the source and how to build it.
It about a usacwifi version....
Sent from my SM-T520 using Tapatalk
Click to expand...
Click to collapse
If I understood it well, it is usacwifi.
Can I use it for a Eurepean wifi (Dufch), I doubt this.
Second: I searched for a way to delete Aroma if I want to go back to a rom without Aroma. I searched for it, cannot find it.
What must be done to remove it and go back to normal recovery. (I use TWRP)?
Aroma is only interface that is used with installing. It isn't installed on the device.
About the usacwifi, didn't have time yet to try building and flashing it, or build it without the usa part in the command.
Is on my todo list
Beamed into tha netzz by a jfltexx @ AOSP KTU84L
RagingHarry said:
Aroma is only interface that is used with installing. It isn't installed on the device.
About the usacwifi, didn't have time yet to try building and flashing it, or build it without the usa part in the command.
Is on my todo list
Beamed into tha netzz by a jfltexx @ AOSP KTU84L
Click to expand...
Click to collapse
Thanks for the answer.
I will wait for Your build.
But can I use usacwifi in Europe (Dutch)? If so, I can help testing the rom.
I looked to it. wifi Europa can do channels 12 and 13, USA cannot use these channels.
jasongwatts said:
After a lot of reading, learning, trial, and error I am excited to be able to finally post my first rom for the Samsung Galaxy Tab Pro 10.1 WiFi (SM-T520).
GigaWatts Pro v1.0
Stock T520UEUAND1 base
De-odexed
Debloated
Rooted with SuperSU v1.99
Busybox
Zipaligned
Init.d support
Knoxless
Permissions have been modified to allow writing to external SD card.
Aroma Installer lets you choose between the stock kernel and the Cybertronics Kernel.
Thanks to Chainfire for his SuperSU and CF-Auto Root.
Thanks to Amarullz for his Aroma Installer.
Download Here
Click to expand...
Click to collapse
I did a jump and installed Your rom.
All went flawless and the system is up and running.
I have one problem. The same I had with the rom of frst4ever. Titanium backup restored my data, after starting the app I get fc. This is for all the apps with data restored from Titanium backup. Has anybody a solution for this problem. I need my data from the apps.
petty500 said:
Thanks for the answer.
I will wait for Your build.
But can I use usacwifi in Europe (Dutch)? If so, I can help testing the rom.
I looked to it. wifi Europa can do channels 12 and 13, USA cannot use these channels.
Click to expand...
Click to collapse
Keep in mind that it is a personal todo list, was wondering if it could work.
But I also have very little spare time to do it.
petty500 said:
I did a jump and installed Your rom.
All went flawless and the system is up and running.
I have one problem. The same I had with the rom of frst4ever. Titanium backup restored my data, after starting the app I get fc. This is for all the apps with data restored from Titanium backup. Has anybody a solution for this problem. I need my data from the apps.
Click to expand...
Click to collapse
Titanium can be dodgy sometimes. Tried just restoring data itself, and not apps+data?
SomeGuyDude said:
Titanium can be dodgy sometimes. Tried just restoring data itself, and not apps+data?
Click to expand...
Click to collapse
Thanks for the answer
I already did it with same result, fc.
petty500 said:
Thanks for the answer
I already did it with same result, fc.
Click to expand...
Click to collapse
I have found the solution to migrate the data. I did this with "my backup". It asks a reboot. I did so.
05 june 2014
I also tried 1 app+data with TB and rebooted without starting the app. This was also a success.
:angel:
@ Jasonwats
I use now the rom for several hours. Until now it works flawless. Thank You for delivering this rom.
As mentioned before the only thing is usacwifi and not europa-wifi, but I can live with it.
:angel:
So Xposed was updated for Lollipop. How many of you are using it with the Nexus 10? I was using CM12 before Xposed and when I first tried installing it, it worked. Then I tried updating the nightly and flashing Xposed again and boot looped. Since then, I couldn't get it flashed on CM12 again. I decided to try an AOSP ROM and went with Dirty Unicorns. Xposed works just fine on that one. So anyone else using Xposed? What ROM are you using it with? Anyone having any issues? What modules are you using? I was thinking of using this thread as a general Xposed discussion since I didn't see another one.
I also had problems with bootloops while flashing the alpha xposed build..
Since the i reflashed cm12 and eagerly waiting for a more stable xposed build!
Running the extended boot menu mod right now. Looking forward to a gravity box release
Beaster said:
I also had problems with bootloops while flashing the alpha xposed build..
Since the i reflashed cm12 and eagerly waiting for a more stable xposed build!
Click to expand...
Click to collapse
I'm not so sure its xposed that's causing the problem. My Nexus 5 hasn't had any issues. I've only had issues on CM12 on the nexus 10. But as i mentioned, its been running good on the dirty unicorn ROM which is an aosp ROM.
mymusicathome said:
Running the extended boot menu mod right now. Looking forward to a gravity box release
Click to expand...
Click to collapse
I've installed Xposed GEL settings and flat style colored bars. Both running good. For some reason, i can't get the status and nav bars on the home screen to be transparent though.
I'm running Xposed with no issues on Purity ROM. Tried to use GEL Settings but that was a mess. Can't figure out a good configuration for my homescreen grids and icon sizes, etc..etc... Anyone have a suggestion about that?
I'd love to have some sort of fullscreen Zooper widget overlay on my homescreens but alas that kind of thing is above my abilities. Lol
Beaster said:
I also had problems with bootloops while flashing the alpha xposed build..
Since the i reflashed cm12 and eagerly waiting for a more stable xposed build!
Click to expand...
Click to collapse
I just tried Alpha 2 of xposed on my Manta. Still getting stuck on boot.
Using CM12 and Khaon Kernel
Alpha 2.. Running Logs filter, Xinstaller, media scanner optimizer, unified nlp, YouTube adaway.. Works fine.
Had it installed on CM12. Everything was working fine. I updated and it bootlooped. Whoops.
I had CF Lumen installed also so I'm not sure which one broke it. In recovery I wiped /system, flashed the rom, GAPPS, su (because it is better than CM12's), then xposed. Booted up fine and worked perfectly.
Did have to have a second reboot because of BBS/CF Lumen but that was expected.
Hmm. So you guys are on cm12 and xposed is working?
Weird.. How long does it take to boot after you flash xposed? Maybe i am not waiting long enough..
EDIT
Just recovered some storage from system partition using this. Flashed xposed and finally booted fine. I guess i was out of storage in my system partition
Thx and great work to Khaon!
usafle said:
I'm running Xposed with no issues on Purity ROM. Tried to use GEL Settings but that was a mess. Can't figure out a good configuration for my homescreen grids and icon sizes, etc..etc... Anyone have a suggestion about that?
I'd love to have some sort of fullscreen Zooper widget overlay on my homescreens but alas that kind of thing is above my abilities. Lol
Click to expand...
Click to collapse
My grid size is 5x7. I think that's a pretty good size for the screen.
Beaster said:
I just tried Alpha 2 of xposed on my Manta. Still getting stuck on boot.
Using CM12 and Khaon Kernel
Click to expand...
Click to collapse
reb1995 said:
Had it installed on CM12. Everything was working fine. I updated and it bootlooped. Whoops.
I had CF Lumen installed also so I'm not sure which one broke it. In recovery I wiped /system, flashed the rom, GAPPS, su (because it is better than CM12's), then xposed. Booted up fine and worked perfectly.
Did have to have a second reboot because of BBS/CF Lumen but that was expected.
Click to expand...
Click to collapse
Beaster said:
Hmm. So you guys are on cm12 and xposed is working?
Weird.. How long does it take to boot after you flash xposed? Maybe i am not waiting long enough..
EDIT
Just recovered some storage from system partition using this. Flashed xposed and finally booted fine. I guess i was out of storage in my system partition
Thx and great work to Khaon!
Click to expand...
Click to collapse
I had too many issues with CM12. But I switched to Dirty Unicorns (an AOSP based ROM) and have had zero issues.
jsgraphicart said:
My grid size is 5x7. I think that's a pretty good size for the screen.
Click to expand...
Click to collapse
I think I have mine set to around the same. Icon size dropped down to 90 to make those icons not so huge.
---------- Post added at 08:24 PM ---------- Previous post was at 08:23 PM ----------
Beaster said:
I just tried Alpha 2 of xposed on my Manta. Still getting stuck on boot.
Using CM12 and Khaon Kernel
Click to expand...
Click to collapse
Guess I better check to see what Alpha version I'm on. Didn't know there was an update
Exposed Nexus 10 success
I found I first had to install the partition "fix" to expand its size, then wipe cache/Davlik before it worked .
Can xposed give multi window function to nexus 10?
Does xposed work with stock 5.1.1 ROM ?
XxM4tzexX said:
Does xposed work with stock 5.1.1 ROM ?
Click to expand...
Click to collapse
It's work fine for me, I'm on stock 5.1.1.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 06:46 PM ---------- Previous post was at 06:46 PM ----------
id3alistic said:
Can xposed give multi window function to nexus 10?
Click to expand...
Click to collapse
The module for lollipop doesn't work properly yet.
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
usafle said:
I think I have mine set to around the same. Icon size dropped down to 90 to make those icons not so huge.
---------- Post added at 08:24 PM ---------- Previous post was at 08:23 PM ----------
Guess I better check to see what Alpha version I'm on. Didn't know there was an update
Click to expand...
Click to collapse
If you're on 5.1.x use this http://forum.xda-developers.com/showthread.php?t=3072979
[ALPHA] [UNOFFICIAL] Xposed for Android 5.1 - API v64 / Alpha 4 / 20150514
Sent from my Nexus 5 using XDA Free mobile app
Just got the notification just now. Seems like a small update with camera raw and some security stuff
Camera Raw
Better Bluetooth
Image corruption fixed
Security patches
Romanian support
Have you installed it. What's the feedback
I asked this yesterday in the OnePlus forums where some parts of the world have been getting it, but might as well ask it here as well ...
Does anyone have the full flashable zip instead of the incremental OTA?
Much thanks!
The complete list of changes
HomeCategories*
*Products**OnePlus 2*
123456→16Next >
125
OxygenOS 2.2.1 rollout is starting on OnePlus 2Yesterday at 8:26 AM

allenwuAdministratorStaff MemberYesterday at 8:26 AM

Hi everyone,
My name is Allen and I'm a project manager on the OxygenOS team. Nice meeting you all! Helen says Hi*
We've started rolling out OxygenOS 2.2.1 on the*OnePlus 2. Here's what's new in this update:
RAW support in OnePlus CameraBluetooth compatibility improvementUltra SIM compatibility improvementGMS 3.0 upgradeImprovement for roaming issuesFix for occasional image corruption issue in OnePlus CameraSecurity patch updateRomanian language support
I'm using Oneplus 2 with OOS full signed 2.2.0 from this thread: http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
Does this update already rolled out on OTA? because i checked on the system updates and it said that i have the latest update on my phone.
Tried it for a bit. Back on CM13 again - no going back now, it's so much better.
efraim14 said:
I'm using Oneplus 2 with OOS full signed 2.2.0 from this thread: http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
Does this update already rolled out on OTA? because i checked on the system updates and it said that i have the latest update on my phone.
Click to expand...
Click to collapse
I just tried it and I'm still on the old Version after flashing the full 2.2.0 and than the update. Don't get it. I guess will have to wait for the full zip
SGE_DEW said:
I just tried it and I'm still on the old Version after flashing the full 2.2.0 and than the update. Don't get it. I guess will have to wait for the full zip
Click to expand...
Click to collapse
do you mean we have to re-flash for 2.2.1 instead of getting it directly from OTA system update?
benj! said:
Tried it for a bit. Back on CM13 again - no going back now, it's so much better.
Click to expand...
Click to collapse
How do you like cm13? Is it MM already?
---------- Post added at 01:24 PM ---------- Previous post was at 01:21 PM ----------
efraim14 said:
do you mean we have to re-flash for 2.2.1 instead of getting it directly from OTA system update?
Click to expand...
Click to collapse
Well I just flashed the full version 2.2.0 and the ota 2.2.1 and of course SuperSU for the second time and it stuck. No idea why it didn't the first time.
SGE_DEW said:
How do you like cm13? Is it MM already?
Click to expand...
Click to collapse
Man whats wrong? Yes. Cyanogenmod 13 is based on Android 6
......
CyanogenMod 11.0 (KitKat 4.4)
CM 12.0 (Lollipop 5.0)
CM 12.1 (Lollipop 5.1)
CM 13.0 (Marshmallow 6.0)
You understand?
BirneKlub9 said:
Man whats wrong? Yes. Cyanogenmod 13 is based on Android 6
......
CyanogenMod 11.0 (KitKat 4.4)
CM 12.0 (Lollipop 5.0)
CM 12.1 (Lollipop 5.1)
CM 13.0 (Marshmallow 6.0)
You understand?
Click to expand...
Click to collapse
Man nothing is wrong. Just a simple question. Not all people keep up with this stuff. What's better about cm?
Guys I have a question I can't get raw files after updating to 2.2.1 what's the problem ...
How to enter camera settngs
dineshlives said:
Guys I have a question I can't get raw files after updating to 2.2.1 what's the problem ...
How to enter camera settngs
Click to expand...
Click to collapse
Head to camera, open the side panel with photo video etc. You'll see a small gear on the bottom right for settings. Use that to get to photo size and change settings to RAW
Something I didn't expect to happen was after updated to 2.2.1, previous error after each boot that says BT mac empty isn't showing anymore. Which is good XD
any known probs via normal update process ?? on oxygen OS 2.2 and TWRP 3.0.0.2
SGE_DEW said:
Man nothing is wrong. Just a simple question. Not all people keep up with this stuff. What's better about cm?
Click to expand...
Click to collapse
Kk was just kidding
Now CM is based on Marshmallow so you have the new android version.
Also ist more customizeable due to themes and stuff and settings.
hope that answers your question
big prob.. wtf.. after trying to update via ota my preferences disappeared .. ?? simcard also not responding .. any ideas how ? Oxy OS 2.2.0
thx
BirneKlub9 said:
Kk was just kidding
Now CM is based on Marshmallow so you have the new android version.
Also ist more customizeable due to themes and stuff and settings.
hope that answers your question
Click to expand...
Click to collapse
Is it running smooth? What about the camera? I think I'll wait until 1+ updates to MM.
---------- Post added at 03:56 PM ---------- Previous post was at 03:56 PM ----------
DACATA said:
any known probs via normal update process ?? on oxygen OS 2.2 and TWRP 3.0.0.2
Click to expand...
Click to collapse
All is well on my end. Try flashing again.
Is ok to install update if rooted? I am rooted and downloaded the ota update but before installing it warns me about potential issues if I continue installing.
SysAdmNj said:
Is ok to install update if rooted? I am rooted and downloaded the ota update but before installing it warns me about potential issues if I continue installing.
Click to expand...
Click to collapse
Question answered billion and billion times on this forum. Why don't you used search function ?
You can't install OTA by downloading it through the OTA Center as the system has been modified with root. If you have TWRP, re-install (you can dirty flash if you are on Oxygen OS) the full rom and then directly the incremental update through TWRP. Then re-root and flash all you need (like Xposed if you want).
Go here too and thanks @Spannaa for his hard work in regrouping all OTA.
Hello, im using samsung galaxy note 2 (n7100) i tried install greenify on 2 custom android 5.1.1 rom first rom unoffical cm12.1 (from ivan meler) second rom aosp (maybe wrong) based android 5.1.1 rom (rom's name is " Nameless 2.1". I got bootloop in the first 5.1.1 while try install greenify 3.6 on package installer. A pop up appear and it said google play crashed and my phone freezed and i got bootloop. In second rom i got random reboot while installing greenify 3.6 on package manager but my phone succes booted but my all apps start to crash if i open they. And i see the greenify in app menu i tried open it but i got random restart again. Then i go to Twrp's file manager and i deleted the greeinfy and my problem solved. Then i go to play store and i tried download the greenify but play store gave error -505 (maybe 501 i dont remeber) code. Then i tried install greenify 3.5.4 but again same error.
In Two rom i installed Xposed 3.1.1 And i get the logs on second rom. And my last words Please help me i want install the greenify it is a magic for android for me.
Same here... I'm using CM 12 on Samsung Galaxy S3 Neo and after 3.6 update everything just crashes. I tried to disable all xposed modules and uninstall some apps but it is still crashing :/
Maivkrzr said:
Same here... I'm using CM 12 on Samsung Galaxy S3 Neo and after 3.6 update everything just crashes. I tried to disable all xposed modules and uninstall some apps but it is still crashing :/
Click to expand...
Click to collapse
S3 Neo here too running CM12.1. Everything crashes after installing either Greenify or Nova Launcher. Disabling with adb makes everything normal again.
Also, are you getting "There is an internal error with your device ...." error too?
No I don't get that message. My phone just crashes when I install Greenify and then he reboots itself. After reboot every app stops working.
It seems that more and more of us is getting this problem. Hope someone will help.
Maivkrzr said:
No I don't get that message. My phone just crashes when I install Greenify and then he reboots itself. After reboot every app stops working.
It seems that more and more of us is getting this problem. Hope someone will help.
Click to expand...
Click to collapse
Greenify v3.6.x seems to cause issues to some people. Try an earlier version.
tnsmani said:
Greenify v3.6.x seems to cause issues to some people. Try an earlier version.
Click to expand...
Click to collapse
I tried earlier versions and same thing happens.
Does Greenify knows about this?
Maivkrzr said:
I tried earlier versions and same thing happens.
Does Greenify knows about this?
Click to expand...
Click to collapse
I don't think that anyone had this issue with the earlier versions. If you have this issue on earlier versions also, then it is possible that the problem lies elsewhere.
I didn't have problems with earlier versions before 3.6.x update. I downloaded older version and same thing happens
Maivkrzr said:
I didn't have problems with earlier versions before 3.6.x update. I downloaded older version and same thing happens
Click to expand...
Click to collapse
In that case check whether the update of ROM, kernel etc have anything to do with it.
If not, do a clean install of your ROM and then install an earlier version of Greenify.
tnsmani said:
In that case check whether the update of ROM, kernel etc have anything to do with it.
If not, do a clean install of your ROM and then install an earlier version of Greenify.
Click to expand...
Click to collapse
Ty, will try
Greenify 5.1 is working.
Maivkrzr said:
Same here... I'm using CM 12 on Samsung Galaxy S3 Neo and after 3.6 update everything just crashes. I tried to disable all xposed modules and uninstall some apps but it is still crashing :/
Click to expand...
Click to collapse
I am also facing this problem on my s3 neo..
and Hey dude which rom do you using now??
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
Maivkrzr said:
Ty, will try
Click to expand...
Click to collapse
Does it work bro??
Greenify!!
When clean install of rom and installing greenify again?
same here guys, updating greenify, nova launcher, faceapp or wikipedia results in bootloop in cm12 and cm13
i found this on google
https://issuetracker.google.com/issues/64434571
Ccr Sharma said:
I am also facing this problem on my s3 neo..
and Hey dude which rom do you using now??
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
Does it work bro??
Greenify!!
When clean install of rom and installing greenify again?
Click to expand...
Click to collapse
No it doesn't work on clean rom... But older versions of greenify work. Download it from apkmirror.
Thanks. And...
Maivkrzr said:
No it doesn't work on clean rom... But older versions of greenify work. Download it from apkmirror.
Click to expand...
Click to collapse
Thanks for your suggestion. And which rom do u now using for the s3 neo i9301i ??
You know about any other stable and best rom for our device??
I have the same problem on my Samsung Galaxy S1 Plus ( i9001 ) with CM 12.1 fresh clean install. Current version Greenify 3.9.5 crashes everything and I end up in a bootloop with optimising apps.
What version did you guys use???
Edit: Authy via YalpStore ends up the same. -.-" I deleted everything with authy in it's name via TWRP File Manager and it booted up again normal.
This is Touchwiz Nougat for SM-C9008 aka C9LTECHN for China Mobile
Rom
C9008ZMU1BQL2 Nougat: https://www.androidfilehost.com/?fid=962157660013069677
Kernel
Nougat Travis Kernel: https://www.androidfilehost.com/?fid=962157660013070127
Xposed
Xposed for Nougat: https://www.androidfilehost.com/?w=files&flid=229076
TWRP
TWRP: https://forum.xda-developers.com/c9-pro/development/twrp-c9ltechn-t3646970
Kernel Features:
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Kernel Patched up to 3.10.108
Mild undervolt for our cpu and gpu
Use all cores to boot
F2FS
Ramdisk Optimised
Swappiness set to 60 (6gb ram doesn't need a constant swap out to swap file.)
Lowered swap file from 2gb to 1gb
Added in core control
Fingerprint fixed fast wakeup enabled
Added more govs
CVE Patches updated as of DEC/2017
Sony,Microsoft,Logitech Gamepad support
More to come....
Kernel Source: https://github.com/travismills82/c9lte-kernel
For those of you who have donated, Thank You very much it is a tremendous help.
Awesome work buddy, supporting that many models is not an easy job
Thanks Travis for your great efforts,could you please upload related bootloader & modem.
Sent from my SM-C9000 using Tapatalk
Could you please guide me how to install these files?
What are the steps?
I have SM-C9008
amincom said:
Thanks Travis for your great efforts,could you please upload related bootloader & modem.
Sent from my SM-C9000 using Tapatalk
Click to expand...
Click to collapse
I have downloded related stock rom and extracted bootloader & modem files and flashed them but after your c9008 rom installed,it stucked at booting screen with c9pro logo,so reinstalled your c9000 rom back.
Sent from my SM-C9000 using Tapatalk
amincom said:
I have downloded related stock rom and extracted bootloader & modem files and flashed them but after your c9008 rom installed,it stucked at booting screen with c9pro logo,so reinstalled your c9000 rom back.
Sent from my SM-C9000 using Tapatalk
Click to expand...
Click to collapse
Its a strait stock rom it should not have issues. Does it boot after you flash travis-kernel and root?
travis82 said:
Its a strait stock rom it should not have issues. Does it boot after you flash travis-kernel and root?
Click to expand...
Click to collapse
It rooted but with stock kernel.
Sent from my SM-C9000 using Tapatalk
Hello travis82,
After immense searching the web, I find you are the only person who can help with TWRP for SM-C9008.
I have installed the latest Android version 7.1.1 on my C9 Pro SM-C9008 and its all Chinese and it does not have google apps. Moreover it does not even have the Apps icon with which normally one would go inside and see all the various apps icons.
Please help.
Best Regards.
Did anyone know the procedure for installation? Should I use Oddin?
vivzbravo said:
Hello travis82,
After immense searching the web, I find you are the only person who can help with TWRP for SM-C9008.
I have installed the latest Android version 7.1.1 on my C9 Pro SM-C9008 and its all Chinese and it does not have google apps. Moreover it does not even have the Apps icon with which normally one would go inside and see all the various apps icons.
Please help.
Best Regards.
Click to expand...
Click to collapse
Chinese firmware does not contain google apps it is blocked in china, second what you are describing is touchwiz new ui. You can adjust its ui settings in launcher settings. So your complaints are not complaints but is how the chinese firmware and new touchwiz work honestly.
travis82 said:
Chinese firmware does not contain google apps it is blocked in china, second what you are describing is touchwiz new ui. You can adjust its ui settings in launcher settings. So your complaints are not complaints but is how the chinese firmware and new touchwiz work honestly.
Click to expand...
Click to collapse
Many thanks Travis82 for your reply.
Could you please give an approximate time when TWRP will be released to support SM-C9008, so that I can try and install the files your have posted here for Kernel and Gapps
you can use the same c9000 twrp for your model they are the same phone just c9008 has 128gb vs 64gb
travis82 said:
you can use the same c9000 twrp for your model they are the same phone just c9008 has 128gb vs 64gb
Click to expand...
Click to collapse
Thanks
My SM-C9008 is 64GB version only.. I will try the TWRP for C9000 as you have suggested and give feedback
vivzbravo said:
Hello travis82,
After immense searching the web, I find you are the only person who can help with TWRP for SM-C9008.
I have installed the latest Android version 7.1.1 on my C9 Pro SM-C9008 and its all Chinese and it does not have google apps. Moreover it does not even have the Apps icon with which normally one would go inside and see all the various apps icons.
Please help.
Best Regards.
Click to expand...
Click to collapse
Hi buddy, try out this zip here, its pulled from TGY ROM
AL_IRAQI said:
Hi buddy, try out this zip here, its pulled from TGY ROM
Click to expand...
Click to collapse
Many thanks Bro.
I finally managed to get it all together with the help of you all.
Special thanks to Travis82, amincom, AL_IRAQI.
Now on my C9008 Model I have installed Nogaut Stock that was for C900F, and its working
C9008 Recovery Install
vivzbravo said:
Many thanks Bro.
I finally managed to get it all together with the help of you all.
Special thanks to Travis82, amincom, AL_IRAQI.
Now on my C9008 Model I have installed Nogaut Stock that was for C900F, and its working
Click to expand...
Click to collapse
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock. Please help me.
---------- Post added at 01:10 PM ---------- Previous post was at 01:06 PM ----------
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock with playstore. Please help me.
Can I flash only kernel ?
My c9000 rooted with msgisk
I only want to change selinux to permissive
zahidzarif said:
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock. Please help me.
---------- Post added at 01:10 PM ---------- Previous post was at 01:06 PM ----------
Dear Friend,
I have c9008 becasue of OTA my Playstore was uninstalled.
Now i am Android 7.
But i want to install this rom. Please help me how i can install this rom.
How did you installed Nogaut Stock with playstore. Please help me.
Click to expand...
Click to collapse
Prior to the below steps I had C9008ZMU1BQL2 installed on my C9008, but since it was Chinese version without any google apps, I followed the below steps.
1. Copied the Kernel zip file by Travis82 on SDCARD
2. Installed twrp-3.2.1-0-c9lte.img.tar using Odin3 v3.12.7 on my C9008 and restarted my phone to check if it loads back to Android successfully.
3. Using Recovery mode, installed KERNEL zip file from SDCARD, after this when I rebooted it did not load Android and would keep rebooting again and again.
4. Restarted in Download mode and using Odin3 v3.12.7 installed Nogaut STOCK file downloaded from SAMMOBILE for C900F (C900FDDU1BQL3)
And it rebooted automatically after installation.
All the best!
C900FDDU1BQL7 already released,we hope to have it as custom rom.
Sent from my SM-C9000 using Tapatalk