Hello,
I am new in the forum and my English is not so good.
Since I flashed my tablet with lineage-17.1-20200821-UNOFFICIAL-gtaxlwifi, my tablet no longer has wifi. I can not connect it.
So I decided to get back the official rom and it´s the same.
Everything I find on the web is not working at all.
Could you help me please
thank you
Re-flash tablet's Stock ROM - not with any other ROM - using ODIN.
chefabien said:
Hello,
I am new in the forum and my English is not so good.
Since I flashed my tablet with lineage-17.1-20200821-UNOFFICIAL-gtaxlwifi, my tablet no longer has wifi. I can not connect it.
So I decided to get back the official rom and it´s the same.
Everything I find on the web is not working at all.
Could you help me please
thank you
Click to expand...
Click to collapse
flash latest stock firmware of your tablet using odin, tick nand erase option in odin and flash it
jwoegerbauer said:
Re-flash tablet's Stock ROM - not with any other ROM - using ODIN.
Click to expand...
Click to collapse
ok I´ll tried with SM-T580_1_20200418201541_rxlj82kjn1_fac and I tell you
prashantp01 said:
flash latest stock firmware of your tablet using odin, tick nand erase option in odin and flash it
Click to expand...
Click to collapse
ok I´m trying right now
thank you.
I´ll tell you soon
chefabien said:
ok I´m trying right now
thank you.
I´ll tell you soon
Click to expand...
Click to collapse
well The stock rom has been installed but when I start the config the wifi is not detected and all my others devices works fine.
Have you other idea...
prashantp01 said:
flash latest stock firmware of your tablet using odin, tick nand erase option in odin and flash it
Click to expand...
Click to collapse
well The stock rom has been installed but when I start the config the wifi is not detected and all my others devices works fine.
Have you other idea...
well The stock rom has been installed but when I start the config the wifi is not detected and all my others devices works fine.
Have you other idea...
chefabien said:
well The stock rom has been installed but when I start the config the wifi is not detected and all my others devices works fine.
Have you other idea...
Click to expand...
Click to collapse
Then it's probably not phone's Stock ROM you flashed or Android's /vendor partition doesn't exist and/or is corrupted.
Use SamFirm Tool to get the correct Stock ROM.
jwoegerbauer said:
Then it's probably not phone's Stock ROM you flashed or Android's /vendor partition doesn't exist and/or is corrupted.
Use SamFirm Tool to get the correct Stock ROM.
Click to expand...
Click to collapse
Thanks for your answer, I´ll try tomorrow.
chefabien said:
Thanks for your answer, I´ll try tomorrow.
Click to expand...
Click to collapse
Hello,
Thank you for your help, I didn´t know "SamFirm Tool" and it´s great but I download the stock rom (SM-T580_T580XXS5CTD1_Oreo(Android 8.1.0)_XEF_Factory Rom (5 File)_20200427) and it said 5 files and there are only 4: AP, BL, CSC, HOME CSC ! Is it normal? What sould be the problem? It´s still the same. the wifi doesn´t work and the tablet was new before i tried to root it.
What more can I do.? please
jwoegerbauer said:
Then it's probably not phone's Stock ROM you flashed or Android's /vendor partition doesn't exist and/or is corrupted.
Use SamFirm Tool to get the correct Stock ROM.
Click to expand...
Click to collapse
Hello,
Thank you for your help, I didn´t know "SamFirm Tool" and it´s great but I download the stock rom (SM-T580_T580XXS5CTD1_Oreo(Android 8.1.0)_XEF_Factory Rom (5 File)_20200427) and it said 5 files and there are only 4: AP, BL, CSC, HOME CSC ! Is it normal? What sould be the problem? It´s still the same. the wifi doesn´t work and the tablet was new before i tried to root it.
What more can I do.? please
still have a problem with the wifi
chefabien said:
Hello,
Thank you for your help, I didn´t know "SamFirm Tool" and it´s great but I download the stock rom (SM-T580_T580XXS5CTD1_Oreo(Android 8.1.0)_XEF_Factory Rom (5 File)_20200427) and it said 5 files and there are only 4: AP, BL, CSC, HOME CSC ! Is it normal? What sould be the problem? It´s still the same. the wifi doesn´t work and the tablet was new before i tried to root it.
What more can I do.? please
Click to expand...
Click to collapse
jwoegerbauer said:
Then it's probably not phone's Stock ROM you flashed or Android's /vendor partition doesn't exist and/or is corrupted.
Use SamFirm Tool to get the correct Stock ROM.
Click to expand...
Click to collapse
Hello,
Thank you for your help, I didn´t know "SamFirm Tool" and it´s great but I download the stock rom (SM-T580_T580XXS5CTD1_Oreo(Android 8.1.0)_XEF_Factory Rom (5 File)_20200427) and it said 5 files and there are only 4: AP, BL, CSC, HOME CSC ! Is it normal? What sould be the problem? It´s still the same. the wifi doesn´t work and the tablet was new before i tried to root it.
What more can I do.? please
chefabien said:
Hello,
Thank you for your help, I didn´t know "SamFirm Tool" and it´s great but I download the stock rom (SM-T580_T580XXS5CTD1_Oreo(Android 8.1.0)_XEF_Factory Rom (5 File)_20200427) and it said 5 files and there are only 4: AP, BL, CSC, HOME CSC ! Is it normal? What sould be the problem? It´s still the same. the wifi doesn´t work and the tablet was new before i tried to root it.
What more can I do.? please
Click to expand...
Click to collapse
You get 5 files for Phones/Tabs with modem/radio, if only wifi you don't get the file for the CP box in Odin.
So BL in BL, AP in AP and CSC in CSC... the one without HOME is for clean flash, the one with HOME is to keep your apps and data (according to Sammobile).
You actually only use 3 files (for wifi devices).
Tab_Triggerhappy said:
You get 5 files for Phones/Tabs with modem/radio, if only wifi you don't get the file for the CP box in Odin.
So BL in BL, AP in AP and CSC in CSC... the one without HOME is for clean flash, the one with HOME is to keep your apps and data (according to Sammobile).
You actually only use 3 files (for wifi devices).
Click to expand...
Click to collapse
Thank you for your reply, I understand,
but my problem still the same.
can anybody help me please I´ve no wifi yet.
thanks
chefabien said:
Thank you for your reply, I understand,
but my problem still the same.
can anybody help me please I´ve no wifi yet.
thanks
Click to expand...
Click to collapse
XEF is french firmware, is that what you want?
Or do you want any of these spanish?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T580 has only PHE for spain at Sammobile.
Image is to show that there are sometimes variants and you need the correct one.
Hardware could also be faulty, but start with correct latest firmware.
Tab_Triggerhappy said:
XEF is french firmware, is that what you want?
Or do you want any of these spanish?
View attachment 5133321
T580 has only PHE for spain at Sammobile.
Image is to show that there are sometimes variants and you need the correct one.
Hardware could also be faulty, but start with correct latest firmware.
Click to expand...
Click to collapse
Hello and thank you so much,
yes the tablet was from france and i tried this one "XEF", but because I live in spain and because the wifi is not working I also tried this one from spain "PHE" and it still the same.
it´s very strange because the tablet was new and was working so good and since I root it, the wifi doesn´t work anymore..
what else can I do.
Is there any print screen o any check I can do to verify if the wifi signal works?
I need help please.
thank you.
fab
chefabien said:
Hello and thank you so much,
yes the tablet was from france and i tried this one "XEF", but because I live in spain and because the wifi is not working I also tried this one from spain "PHE" and it still the same.
it´s very strange because the tablet was new and was working so good and since I root it, the wifi doesn´t work anymore..
what else can I do.
Is there any print screen o any check I can do to verify if the wifi signal works?
I need help please.
thank you.
fab
Click to expand...
Click to collapse
please anybody?
Related
hello guys
my samsung galaxy s3 is bricked ..... it wont boot ... just stuck on welcome screen ..... and never boot up to system and cant do reset factory but i can enter download mood??
can u plz help me how to recover and ficx that .... thx
Did you just restore a stock firmware? If so install cwm recovery using Odin and clear data wipe cache and dalvik.
Sent from my Nexus 7 using xda premium
Download stock rom and odin it.
Sent from my GT-I9300 using xda premium
duke333 said:
Did you just restore a stock firmware? If so install cwm recovery using Odin and clear data wipe cache and dalvik.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
ummm ...... can u tell me exactly how to do that????? .... provide me links and clear steps .... i am not into android staff but .... i have nook simple touch (e-reader) and repair it with tools ......... anyway i show u my problems with clear pic and details
thx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
best regards
speedman2202 said:
ummm ...... can u tell me exactly how to do that????? .... provide me links and clear steps .... i am not into android staff but .... i have nook simple touch (e-reader) and repair it with tools ......... anyway i show u my problems with clear pic and details
thx
best regards
Click to expand...
Click to collapse
You're not the only one, take a look here:
http://forum.xda-developers.com/showthread.php?t=1993044&page=46
whitebait said:
You're not the only one, take a look here:
http://forum.xda-developers.com/showthread.php?t=1993044&page=46
Click to expand...
Click to collapse
That isn't a sudden death, user flashed something wrong and that kills the product name in download mode.
xSpeced said:
That isn't a sudden death, user flashed something wrong and that kills the product name in download mode.
Click to expand...
Click to collapse
i didnt flash any things ...... just download 2 games and then my mobile become lagging and froze ...... then shut down and as u see .... welcome screen i stuck in
speedman2202 said:
i didnt flash any things ...... just download 2 games and then my mobile become lagging and froze ...... then shut down and as u see .... welcome screen i stuck in
Click to expand...
Click to collapse
Put your phone in download mode and flash STOCK Samsung rom like ELKC with ODIN PC.
This must work.
cybdani said:
Put your phone in download mode and flash STOCK Samsung rom like ELKC with ODIN PC.
This must work.
Click to expand...
Click to collapse
can u provide me links how to do it and give me the right rom/bootloader/..etc and how to do that
thx
speedman2202 said:
can u provide me links how to do it and give me the right rom/bootloader/..etc and how to do that
thx
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=26530736
Sent from my GT-I9300 using xda premium
You can download stock ELKC from here http://forum.xda-developers.com/showpost.php?p=25922341&postcount=2
Steps:
-Put phone into download mode.
-Open ODIN.
-Clic on PDA button and select stock rom xxxxxxxx.tar.md5
-Connect phone to PC.
-Ensure that ONLY Auto Reboot and reset time are selected in ODIN.
-Clic on START.
-Wait.
-Phone reboots itself.
Hope this help.
Greetings.
cybdani said:
You can download stock ELKC from here http://forum.xda-developers.com/showpost.php?p=25922341&postcount=2
Steps:
-Put phone into download mode.
-Open ODIN.
-Clic on PDA button and select stock rom xxxxxxxx.tar.md5
-Connect phone to PC.
-Ensure that ONLY Auto Reboot and reset time are selected in ODIN.
-Clic on START.
-Wait.
-Phone reboots itself.
Hope this help.
Greetings.
Click to expand...
Click to collapse
thx soo much .... and to be cleared ..... my phone bought it from Qatar .... and me from Egypt and there now in Egypt ..... can u tell me how to pick and choose the right and the suitable files (CSC , BootLoader, PDA,Pit,Phone) for my mobile ..... if u need any info about my mobile .... i will give it to u
also i wanna ask about how about do repartitioning for my phone also .... i just stuck on my mobile as u see in boot up screen .... also i am w8 ur replay and tell me what the suitable files i need ...... thx anyway
speedman2202 said:
thx soo much .... and to be cleared ..... my phone bought it from Qatar .... and me from Egypt and there now in Egypt ..... can u tell me how to pick and choose the right and the suitable files (CSC , BootLoader, PDA,Pit,Phone) for my mobile ..... if u need any info about my mobile .... i will give it to u
also i wanna ask about how about do repartitioning for my phone also .... i just stuck on my mobile as u see in boot up screen .... also i am w8 ur replay and tell me what the suitable files i need ...... thx anyway
Click to expand...
Click to collapse
You don't need to repartition. What version was installed before this problem?
You only need to download the same version from the post linked above (not elkc) and flash it with odin. Instead of w8 can you try with w7? You need to install samsung drivers first to get odin working.
First try to boot it. After this you can flash correct CSC.
cybdani said:
You don't need to repartition. What version was installed before this problem?
You only need to download the same version from the post linked above (not elkc) and flash it with odin. Instead of w8 can you try with w7? You need to install samsung drivers first to get odin working.
First try to boot it. After this you can flash correct CSC.
Click to expand...
Click to collapse
i cant remember ..... but it was updated till 15/9/2012 ...... anyway i do small search and i think is this the packahe suitable for me
I9300XXALE9 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE9 (4.0.4)
Region Africa
Country: Algeria
Carrier: Unbranded
Build Date: 15 May 2012
Modem: XXLE8
CSC: OJVALE9
Change List: 554452
how u think???
also i want repartition my system cuz i feel there's something wrong with my partitioning internal SD , how u think???
speedman2202 said:
i cant remember ..... but it was updated till 15/9/2012 ...... anyway i do small search and i think is this the packahe suitable for me
I9300XXALE9 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE9 (4.0.4)
Region Africa
Country: Algeria
Carrier: Unbranded
Build Date: 15 May 2012
Modem: XXLE8
CSC: OJVALE9
Change List: 554452
how u think???
also i want repartition my system cuz i feel there's something wrong with my partitioning internal SD , how u think???
Click to expand...
Click to collapse
Why are you feeling that something is wrong with internal sd?
Can you enter to stock recovery? Maybe a factory reset from there is more safe than repartition.
I think you can flash DLJ5 INDIA UNBRANDED.
cybdani said:
Why are you feeling that something is wrong with internal sd?
Can you enter to stock recovery? Maybe a factory reset from there is more safe than repartition.
I think you can flash DLJ5 INDIA UNBRANDED.
Click to expand...
Click to collapse
ok , i cant get into factory mode .....i tried before ....but i cant get in factory mode ..... i need all necessary files as i mentioned also my mobile factorized in Vietnam ..... and if u need any additional info .... i can provide it to u .... also can u tell me deference between this firmware ..... and whats wrong i install wrong firmware also how about PIT , why i not want me apply that ( i do it as i do format for my HDD computer ) that's all
thx anyway
speedman2202 said:
ok , i cant get into factory mood .....i tried before ....but i cant get in factory mood ..... i need all necessary files as i mentioned also my mobile factorized in Vietnam ..... and if u need any additional info .... i can provide it to u .... also can u tell me deference between this firmware ..... and whats wrong i install wrong firmware also how about PIT , why i not want me apply that ( i do it as i do format for my HDD computer ) that's all
thx anyway
Click to expand...
Click to collapse
I'm in factory mood, bring it on, love factories me
Sent from my GT-I9300 using xda app-developers app
coutts99 said:
I'm in factory mood, bring it on, love factories me
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
factory mood = factory reset , i mean :|
lol ..... ur post not helping by the way ...... :|
i do small search and found that .....
http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=EGY&os=1&type=1#firmware
how u think guys????
any new solutions???
Hi everyone
I have Samsung galaxy SII SC-02C
The problem is
I have install a custom ROM (Omega V24)
When i went to return to the custom ROM 4.0.3 with Odin
i Can not
and an error msg appear
Could some one help me?
I have asked some one and he told that i need a custom rom with 3 files: CSC etc.....
did some have these files?
Regards
What error?
Wysłane z mojego GT-I9100 przy użyciu Tapatalka
---------- Post added at 11:58 PM ---------- Previous post was at 11:57 PM ----------
You may want to try samfirmware.com.
Wysłane z mojego GT-I9100 przy użyciu Tapatalka
Did not complete the installation
What is your current ROM's version? You don't need odin to flash a custom ROM, flash it from recovery, if you want to flash a stock rom, you have to download it and flash with odin, post what you want clearly and i will try to help.
Dakura said:
What is your current ROM's version? You don't need odin to flash a custom ROM, flash it from recovery, if you want to flash a stock rom, you have to download it and flash with odin, post what you want clearly and i will try to help.
Click to expand...
Click to collapse
I have 4.12
I want to return to stock Rom 4.03
A msg error appear when installing with Odin
There are no such versions as 4.12 so i will assume you said 4.1.2, why do you want to return to 4.0.3? Is SC-02C is a japanese version of S2? You need to find your stock firmware, i would recommend you find a jelly bean firmware and flash it, you can use samfirmware.com to find your version, download your stock rom, plug your phone in your computer in download mode, put your rom in pda section of odin and start flash, and don't forget to wipe your phone from recovery mode, if it still gives error try nuking your phone: http://forum.xda-developers.com/showthread.php?t=2532929
Dakura said:
There are no such versions as 4.12 so i will assume you said 4.1.2, why do you want to return to 4.0.3? Is SC-02C is a japanese version of S2? You need to find your stock firmware, i would recommend you find a jelly bean firmware and flash it, you can use samfirmware.com to find your version, download your stock rom, plug your phone in your computer in download mode, put your rom in pda section of odin and start flash, and don't forget to wipe your phone from recovery mode, if it still gives error try nuking your phone: http://forum.xda-developers.com/showthread.php?t=2532929
Click to expand...
Click to collapse
the problem that i have already this file but it does not work
when i put it like you said in PDA and click START
it stop the installing and give error msg
FACTORY REST Error
If possible the other files such as CSC ....
No, it is not possible with other files, idk who told you that but "other files" doesn't work that way, i told you to nuke your phone in my last post, please do it and then post here, you need to give some effort you know.
Dakura said:
No, it is not possible with other files, idk who told you that but "other files" doesn't work that way, i told you to nuke your phone in my last post, please do it and then post here, you need to give some effort you know.
Click to expand...
Click to collapse
If you are installing a new STOCK ROM and want to do a Nuke/Wipe then:
1. Reboot into CWM Recovery
2. Install zip from SD card>Run GS2ROMWipe or GS2ROMNuke
3. Reboot into Download mode
4. Install your stock ROM via Odin
5. Re-root your device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everything looks fine, if you've already nuked your phone make sure you have the correct ROM or download it again, go to this site: http://samfirmware.com/
search for "I9100", find your location, download it and try flashing that.
Dakura said:
Everything looks fine, if you've already nuked your phone make sure you have the correct ROM or download it again, go to this site: http://samfirmware.com/
search for "I9100", find your location, download it and try flashing that.
Click to expand...
Click to collapse
what should i do now
[email protected] said:
what should i do now
Click to expand...
Click to collapse
I've already told you,
1- Go to : http://samfirmware.com/
2- To "Search device here..." write I9100,
3- Find whatever country and version you desire,
4- Download it ( You may need to register at this site)
5- Flash with odin and see if it works out.
Dakura said:
I've already told you,
1- Go to : http://samfirmware.com/
2- To "Search device here..." write I9100,
3- Find whatever country and version you desire,
4- Download it ( You may need to register at this site)
5- Flash with odin and see if it works out.
Click to expand...
Click to collapse
No thing
Could some one help me?
[email protected] said:
Could some one help me?
Click to expand...
Click to collapse
Is there some can help me?
I can may help you but I think it is an Odin error maybe try Odin v1.85
Could you tell a bit more about it?
Sent from my GT-I9100 using xda app-developers app
Here you can get everything for your
CUBOT ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be aware!!!! check your version go to settings->about phone->build number.
1.3 stay here
v0.7 or lower!
v1.5!
v0.8 turbo
I am not responsible for anything that happens to your device.
Did you also flash the wrong rom or/and recovery on your cubot one?? I'm going to show you how to get unbricked! (Goto 2.b)
1.Recovery
Installing a Recovery:
a. you have still a working rom
- use Mobileuncle Tools and press flash recovery from sdcard. (see attachment for immage)
b. rom broken
power phone down, hold power+volume down. You should get a screen with chinese lettres, don't press anything
- grab MtkDroidTools
- attach your phone
- let it be recognized (adb drivers needed)
- klick "root, backup, recovery"
- klick allready prepared files
- klick recovery and boot button
- cancel rom selection
- select your recovery file
- klick yes
- klick yes to boot in recovery
- see your phone burning
C. Use sp flash tools(advanced)
Click to expand...
Click to collapse
2.Rom
A.custom rom
Make sure you have cwm. Go ahead and install a custom rom like discribed in the other forum. Then flash boot.zip and your done
You can flash any custom rom!!!!!
B broken rom
Go up and install cwm
Flash boot.zip(see attachment)
C. Difficult way (only if the two things above fail)
I won't hold your hand how to use sp Flash tools, but I will provide you with the image. This is untested (not even by myself). I made this backup with MTK droid tools and prepared the block for sp Flash tools. Do not flash "PRELOADER" and the "DSP_BL" without any reason. (So never!!)
here's the link to the files mediafire
Click to expand...
Click to collapse
3. I Have Lost my IMEI
A. Turn your phone, pull out the battery and you could read them
B.
view other forum for other way to do it
driver
adb driver link
legal Information:
I used some of information from http://forum.xda-developers.com/showpost.php?p=44784396/URL]. I would like to thank him.
Everything i or other users present here is free for use, but everything you do with your device can possibly destroy your device.
Neither i or anybody else than you is responsible when anything goes wrong when you apply any of the provided tools, firmware, scripts, recoveries, etc.
Changing any part (Hardware or Software) of your device can cause lost of warranty.
I give no support via PN. Post your Questions here.
Click to expand...
Click to collapse
I'm not a native English speaker. If there's any spelling/wordchoice/... mistake, feel free to say it. Any improvements are always welcome. I probally won't be frequent visiting my own post so help each other.
This thread is in Beta
Don't forget to hit thanks if I helped you! :good: (right below this post on the left)
http://forum.xda-developers.com/showpost.php?p=44784396&postcount=2
revesed
reversed
Jelly bean is nice and all, but....
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Click to expand...
Click to collapse
Yeah sure
danistuta said:
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Not yet but you can backup your phone with mtkdroidtools, flash recovery (generate also with mtkdroidtools), backup in cwm, flash custom rom, restore boot.img from backup , wip and reboot. Everything should be fine and in case of failure you can always revert back!!
Dave
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
danistuta said:
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Yeah but it is more dificult make a cwm backup(make sure it isn't corrupt), wipe everything, install rom, restore boot.img from back-up and it should work (and you can revert back in cade of!)
Good news for everyone with a newer Cubot, who is looking for the v1.5.
Today the guys from Cubot finally replied to my emails.
This is the link for the 1.5 firmware:
http://pan.baidu.com/s/1nt5E6b3?qq-pf-to=pcqq.temporaryc2c
For me it worked out very well, I rescued my Cubot with it.
But be aware that this the latest version of the firmware, propably for the newer Cubot One.
Is there already news on any new ports for our Cubots? I tried to flash the new MIUI V5, but it doesn't work with the new Cubot One. I just see a grey screen after installing it successful. Man I would kill a OMNIROM or Cyanogenmod...
Regards
rob
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU
Hi guys!
If you're having Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU read my post written here!
Cheers
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
drevel123 said:
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
Click to expand...
Click to collapse
Of course so I can make better recoveries (touch & twrp).
Can you share a link to file or a private massage?
Thanks in advance
@r0b
Have you tried to restore the stock v1.5 boot.img?
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Click to expand...
Click to collapse
there'q a diffrence!
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
drevel123 said:
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
Click to expand...
Click to collapse
yeah flash any 0.8 rom and than flash the boot.zip from the first post!
Thanks for the info! I was just a little worried, didn't want to break the phone.
y2imm said:
...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...
Click to expand...
Click to collapse
If the ROM is in a rar file, you can flash it via SP_Flash_Tool. You have to extract the rar, then probably use the following guide.
cool
thans
Hi everybody,
I have flash G925FXXS4DPG2 Rom by Odin.
No problem but if i want downgrade in G925FXXS3DPF1 its fail at Sboot.bin flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is an exemple with 3DPDP but with 3DPF1 its the same...
So no more downgrade possible after Flash 4Dxxx Rom. Impossible to return in 3Dxxxx.
If i try to flash 4PDG2 again, no issue with Odin, flash succes... So its not Odin neighter cable or phone problem....
If i restore my Nandroid Backup to return on my Custom Rom base 3DPDP, unknow baseband, so no more IMEI, even if i flash 3Dxxxx Modem and BL.
Does someone have an idea ?
edzamber said:
Hi everybody,
I have flash G925FXXS4DPG2 Rom by Odin.
No problem but if i want downgrade in G925FXXS3DPF1 its fail at Sboot.bin flash.
Here is an exemple with 3DPDP but with 3DPF1 its the same...
So no more downgrade possible after Flash 4Dxxx Rom. Impossible to return in 3Dxxxx.
If i try to flash 4PDG2 again, no issue with Odin, flash succes... So its not Odin neighter cable or phone problem....
Does someone have an idea ?
Click to expand...
Click to collapse
azzzzzzz ! it's not possible the downgrade?!?!!? this is very strange ,,,,,,,,,,,,, i cant help you, sorry my friend ..
it seems a new android version like a new cake
edzamber said:
Hi everybody,
I have flash G925FXXS4DPG2 Rom by Odin.
No problem but if i want downgrade in G925FXXS3DPF1 its fail at Sboot.bin flash.
Here is an exemple with 3DPDP but with 3DPF1 its the same...
So no more downgrade possible after Flash 4Dxxx Rom. Impossible to return in 3Dxxxx.
If i try to flash 4PDG2 again, no issue with Odin, flash succes... So its not Odin neighter cable or phone problem....
Does someone have an idea ?
Click to expand...
Click to collapse
Samething happening on note 5 tmo new update N920TUVU3DPG1 we on same boat
Sent from my Samsung SM-N920T using XDA Labs
Carotix said:
azzzzzzz ! it's not possible the upgrade?!?!!? this is very strange ,,,,,,,,,,,,, i cant help you, sorry my friend ..
it seems a new android version like a new cake
Click to expand...
Click to collapse
I don't know but look, it seems that there is a secondary locked BL...
JonathanRAZ said:
Samething happening on note 5 tmo new update N920TUVU3DPG1 we on same boat
Sent from my Samsung SM-N920T using XDA Labs
Click to expand...
Click to collapse
Yes it seems to be the same problem...
edzamber said:
I don't know but look, it seems that there is a secondary locked BL...
Click to expand...
Click to collapse
Sent from my Samsung SM-N920T using XDA Labs
Hi all
Ok, some news :
As you can't downgrade, you can also restore a Nandroid Backup from TWRP to come back in older base, but you need new BL and Modem 4Dxxx to have baseband and imei. This is the only solution.
If you brick your phone, or need to come back on Official Samsung Firmware, as BL is blocked, only 4Dxxxx official Firmware can be flash by Odin
Here are my TWRP flashable zip and Odin tar for BL and Modem 4DPG2
Only for G925F
flashable TWRP Zip
http://www.mediafire.com/?06ylnww3q4s2s6c
Odin TAR Version
http://www.mediafire.com/?z79kna8k9x4zyv1
Only for G920F
flashable TWRP Zip
http://www.mediafire.com/?sb0bh7560q2626r
Odin TAR Version
http://www.mediafire.com/?87ts10pr0dcrmb6
@edzamber Can i change base secsettings2.apk ??? thx men
elkinguerrabarreto said:
@edzamber Can i change base secsettings2.apk ??? thx men
Click to expand...
Click to collapse
What do you mean ?
edzamber said:
What do you mean ?
Click to expand...
Click to collapse
I using s6 edge g925I. i have a settings2.apk modified but of a rom G925F, when change manually the file with root explore, show spaces, i think it is the rom base
elkinguerrabarreto said:
I using s6 edge g925I. i have a settings2.apk modified but of a rom G925F, when change manually the file with root explore, show spaces, i think it is the rom base
Click to expand...
Click to collapse
This is Off Topic, but i use a modified SecSettings2 from an another base and working fine...
edzamber said:
This is Off Topic, but i use a modified SecSettings2 from an another base and working fine...
Click to expand...
Click to collapse
OK, but what do I do to remove spaces with secsetting2 from G925F
elkinguerrabarreto said:
OK, but what do I do to remove spaces with secsetting2 from G925F
Click to expand...
Click to collapse
PM me with a screenshot please
edzamber said:
PM me with a screenshot please
Click to expand...
Click to collapse
View attachment 3816551
this is bug
elkinguerrabarreto said:
this is bug
Click to expand...
Click to collapse
By PM mate, this is Off Topic, nothing to do Here.
Thanks.
so...no chance to flash lollipop stock now )
i want it for 925i model
Sent from my SM-G925I using XDA-Developers mobile app
edzamber said:
Hi all
Ok, some news :
As you can't downgrade, you can also restore a Nandroid Backup from TWRP to come back in older base, but you need new BL and Modem 4Dxxx to have baseband and imei. This is the only solution.
If you brick your phone, or need to come back on Official Samsung Firmware, as BL is blocked, only 4Dxxxx official Firmware can be flash by Odin
Here are my TWRP flashable zip and Odin tar for BL and Modem 4DPG2
Only for G925F
flashable TWRP Zip
http://www.mediafire.com/?06ylnww3q4s2s6c
Odin TAR Version
http://www.mediafire.com/?z79kna8k9x4zyv1
Only for G920F
flashable TWRP Zip
http://www.mediafire.com/?sb0bh7560q2626r
Odin TAR Version
http://www.mediafire.com/?87ts10pr0dcrmb6
Click to expand...
Click to collapse
This worked perfectly for me. After 2 days of non-stop experiment nothing worked. This file did the work. I'm using G925F.
Thank you so much.
edzamber said:
Hi all
Ok, some news :
As you can't downgrade, you can also restore a Nandroid Backup from TWRP to come back in older base, but you need new BL and Modem 4Dxxx to have baseband and imei. This is the only solution.
If you brick your phone, or need to come back on Official Samsung Firmware, as BL is blocked, only 4Dxxxx official Firmware can be flash by Odin
Here are my TWRP flashable zip and Odin tar for BL and Modem 4DPG2
Only for G925F
flashable TWRP Zip
http://www.mediafire.com/?06ylnww3q4s2s6c
Odin TAR Version
http://www.mediafire.com/?z79kna8k9x4zyv1
Only for G920F
flashable TWRP Zip
http://www.mediafire.com/?sb0bh7560q2626r
Odin TAR Version
http://www.mediafire.com/?87ts10pr0dcrmb6
Click to expand...
Click to collapse
Which the steps are to continue? could a small guide make? I am in the g920fxxs4dpg2
DanyzoO said:
Which the steps are to continue? could a small guide make? I am in the g920fxxs4dpg2
Click to expand...
Click to collapse
That's all mate, just flash BL 4DPG2 for your model phone by Odin in AP
Then flash 4DPxxxx ROM by Odin.
If you need to restore a Custom Rom in 3Dxxx Rom, just restore it then flash BL 4DPG2 by TWRP Recovery.
Tutorial for replacing the original KERNEL with your PREFERED one in boot.img!
I did this image's tutorial for the users wich want to change the original kernel of the rom with his prefered kernel
You ned a pc runing with windows XP,7,8,10
Download the "Android Image Kitchen from here
and follow the instruction writed in image's
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next image's are for help you to install the new "image-new.img"(boot.img) on the phone with TWRPrecovery
Atention!
MAKE FIRST A BACKUP before install the ROM and the NEW boot.img
Use only boot.img's for J5xxx/2015 for j5/2015 phones or boot.img's j510xx/2016 for j5/2016 phones
DONT edit/change the RAMDISK files without necesarry knowledge(DONT TOUCH IT!)
USE the SAME android version 5.1.1=>5.1.1 or 6.0.1=>6.0.1 for the boot.img's
DONT report bug's(if you find it) to the DEVELOPPER of the ROM(Will not be take in CONSIDERATION)
You will NOT BRIK te phone IF you RESPECT all the instruction and first 4 LINES from "ATENTION!"(IF you are not shure on your hand DONT DO IT!)
IF the changed file are NOT MATCH you will get a BOOTLOP! so you can try other files from other boot.img
ENJOY by your PREFFERED KERNEL
Thanks!
How to fix WIFI after the replacement!
After you change the Kernel, you can get the WIFI not working!
To fix that you need to have ROOT(SU rights) on the phone
and follow the image's and instruction writed it it
reserved
reserved
Q: How to boot stock 5.1.1 on new bootloader?
I know how to compile odin images, so i can flash stock 5.1.1 on 6 bootloader with odin.
MaDaLiNoSt said:
Q: How to boot stock 5.1.1 on new bootloader?
I know how to compile odin images, so i can flash stock 5.1.1 on 6 bootloader with odin.
Click to expand...
Click to collapse
So, you want to put stok rom 5.1.1 on 6.0.1 botloader!
first you must modify the boot.img replacing the "dtb"(5.1.1) file with the one from stok boot.img(6.0.1)
with ODIN can work or not becouse ODIN chech the version of each file before flashing, but you can try!
after you modify the boot.img, extract the system.img.ext4(5.1.1) file from stok rom.md5
put the new boot.img and the system.img.ext4 in a .tar archive and try to flash it with ODIN
you will have succes or can fail(becouse of ODIN)
also you can use the superRkitchen in linux to compile the rom to be flashed it with TWRP
that "dtb"(6.0.1) file will help you to pass the boot of a 5.1.1 rom on 6.0.1 botloader
that will work becouse i already did it with my ported roms
if you dont know hou to compile the rom with superRkitchen just tell me and i will guide you!
vaserbanix said:
so, you want to put stok rom 5.1.1 on 6.0.1 botloader!
First you must modify the boot.img replacing the "dtb"(5.1.1) file with the one from stok boot.img(6.0.1)
with odin can work or not becouse odin chech the version of each file before flashing, but you can try!
After you modify the boot.img, extract the system.img.ext4(5.1.1) file from stok rom.md5
put the new boot.img and the system.img.ext4 in a .tar archive and try to flash it with odin
you will have succes or can fail(becouse of odin)
also you can use the superrkitchen in linux to compile the rom to be flashed it with twrp
that "dtb"(6.0.1) file will help you to pass the boot of a 5.1.1 rom on 6.0.1 botloader
that will work becouse i already did it with my ported roms
if you dont know hou to compile the rom with superrkitchen just tell me and i will guide you!
Click to expand...
Click to collapse
oh my god ! I am so excited now.
I booted into 5.1.1 back :d:d:d:d:d:d
Edit: I leave it for 10 mins in boot animation... if not pass=bootloop
after 10 mins================Fail, why??
MaDaLiNoSt said:
oh my god ! I am so excited now.
I booted into 5.1.1 back :d:d:d:d:d:d
Click to expand...
Click to collapse
you are blocked in 6.0.1 botloader?
i understand you flashed the rom with success! i'm happy for you!
i beleve that process can be done and vice versa to flash a 6.0.1 rom on a 5.1.1 botloader(i didnt test it yet)
also it can be done with any custom rom BUT becouse we dont have here custom boot.img(6.0.1) except the one from Skies ROM by @BlackMesa123 or of @KingRaheel wich give up the project, the posibilities are limited for now, maybe in the near future
BUT(becouse all the time can be a BUT) can be tryed wiht the "dtb" file from stok rom's on custom rom's
Thanks!
MaDaLiNoSt said:
oh my god ! I am so excited now.
I booted into 5.1.1 back :d:d:d:d:d:d
Edit: I leave it for 10 mins in boot animation... if not pass=bootloop
after 10 mins================Fail, why??
Click to expand...
Click to collapse
do you have a backup of 5.1.1 stok rom?
if yes, restore the backup and then install the boot.img and reboot
or try the dtb file from King Raheel boot.img (6.0.1) or other custom (6.0.1) boot.img,
i worked with custom files not with stok, that can have some securities in it
vaserbanix said:
do you have a backup of 5.1.1 stok rom?
if yes, restore the backup and then install the boot.img and reboot
or try the dtb file from King Raheel boot.img (6.0.1) or other custom (6.0.1) boot.img,
i worked with custom files not with stok, that can have some securities in it
Click to expand...
Click to collapse
i tried even with DJ STEEVE :no luck
MaDaLiNoSt said:
i tried even with DJ STEEVE :no luck
Click to expand...
Click to collapse
on stok rom can be guilty the KNOX, CSC.
for me on custom rom work DJ Steve file
try my Slim Stok rom, is deKNOXed, deBloated, rooted etc, for FN
https://forum.xda-developers.com/galaxy-j5/development/romstock-modified-sm-j500fn-t3317737
ps. try to make a logcat
vaserbanix said:
you are blocked in 6.0.1 botloader?
i understand you flashed the rom with success! i'm happy for you!
i beleve that process can be done and vice versa to flash a 6.0.1 rom on a 5.1.1 botloader(i didnt test it yet)
also it can be done with any custom rom BUT becouse we dont have here custom boot.img(6.0.1) except the one from Skies ROM by @BlackMesa123 or of @KingRaheel wich give up the project, the posibilities are limited for now, maybe in the near future
BUT(becouse all the time can be a BUT) can be tryed wiht the "dtb" file from stok rom's on custom rom's
Thanks!
Click to expand...
Click to collapse
Actually my kernel in skies is djsteve one with ramdisk edit for boot note7 rom lol. Btw bro I don't understand the guide.. why replace the kernel binaries when you can just use the boot.img lol
This i did on custom rom, on stok rom can work just to replace all boot.img
on stok rom's the ramdisk can be the same or almost the same and rom can boot
but on custom every rom has his ramdisk wich not work on other
Thanks!
vaserbanix said:
This i did on custom rom, on stok rom can work just to replace all boot.img
on stok rom's the ramdisk can be the same or almost the same and rom can boot
but on custom every rom has his ramdisk wich not work on other
Thamks!
Click to expand...
Click to collapse
Oh I understand. btw edit ramdisk is pretty easy, just use winmerge then you see what services are missing etc
BlackMesa123 said:
Oh I understand. btw edit ramdisk is pretty easy, just use winmerge then you see what services are missing etc
Click to expand...
Click to collapse
Thanks! i use MELD 1.8.6.0 for that
but i wil chek the winmerge too
I THINK i restored old bootloader !, Now i am using old twrp because new one didnt work, and room booted !!!!!! OMGGGG SCREENSHOOTS ASAP !
MaDaLiNoSt said:
I THINK i restored old bootloader !, Now i am using old twrp because new one didnt work, and room booted !!!!!! OMGGGG SCREENSHOOTS ASAP !
Click to expand...
Click to collapse
i just instaled the 5.1.1 slimromFN on my F with 6.0.1 botloader
with the replacement mentioned and it booted
i get sim not working but can be from my phone wich are dual sim
i will try the slimF 5.1.1 rom now
everything is working and back to normal, i am using stock boot image !
I just restored old bootloader with custom odin image by me. Because i was locked on the new one
MaDaLiNoSt said:
everything is working and back to normal, i am using stock boot image !
I just restored old bootloader with custom odin image by me. Because i was locked on the new one
Click to expand...
Click to collapse
on my phone are on MM botloader
i never knew i can bypass samsung bootloader and replace with stock one.
Now i feel like a genius (pro) ))))))))