Hi guys
I would like to know if you could help me with a strange problem, i´ve been using the GingerDX rom on my x10 mini pro till yesterday. Yesterday my touchscreen stopped working don´t know why, i´ve notice some lags in responding time, but i thoughth that should be "normal" with processing information or something similar...but try to reboot a few times and the problem remains, and the only thing i could do was entering pin number with slide keyboard.
Then i try to install the rom again, with full wipe etc etc, and same problem, even with other rom (one of Paullxxx).
Then thought that could be a hardware problem, and get SEUS and restore it...but then the touchscreen was responding with no problems, and i´ve been using all morning, about 12h and no problem at all.
Now i´ve root it again and had installed a custom rom again, and the problem backs again
Do someone know what is the problem?
Could someone help me please?
Sorry for my english
Best regards
The problem was solved by SEUS, and start ROOT and all the stuff again.
I supose it was some drivers issues or something, but strange was the fact that ROMS were working long time ago, and with no modification or update, the touch screen stop responding
I am facing the same problem.I had been using MiniCM7 Pro v20 for about 6 months, then suddenly one day touch screen stopped working. Rest all was working fine. My x10 mini pro's touch screen wont work on any custom rom . I tried with many rom's. But after updating with SEUS touch screen works again .
Can please anyone please suggest a solution on this....
I cant withstand the stock rom for long
Hey guys,
i got the problem, that my device suddenly freezes and reboots after turning the display on or of. But it happens "only" 3-5 times a day and I have no Idea why. Apart from that issue, my device runs perfectly smooth with no other Problems. I use the CM12 (Android 5.1.1 / May 20), but I restored the factory Kitkat ROM and unfortunately it's the same there...
Any Ideas?
Thanks for your help!!!
Sorry, just found a thread with the same issue :/
Pls delete this thread, thx
Hello sir. I am in a big trauble with my samsung galaxy E120 k. It is rooted and running in cwm recovery. As it is a korian phone there are a few number of custom rom i found but non of them fully stable and 100% bug free. So i am running with stock rom with variety of customization by xposed module. But suddenly yesterday my lockscreen has vaniahed!! Not only this, in addition with this in every boot bluetooth automatically goes on and screen time out seted at 10 minute and most serious peoblem is powwr menu also vanished , holding power button leads to switch off directly instead of appear power menu where reboot, user profile, shutdown are suppose to listed. I can not solve this even after fully wiped data, reset factory setting and restored previously backuped stock rom. Nothing works. I tried every possible way i known. I searched google a huge bt got nothing.
Now plz plz plz anyone help how can i get rid of these problem. It is very urgent coz i im gonna sell this **** after resolve the problem. Plz anyone help me. I will be very very greatful to u. Thanks in advance and sorry for my bad english.
Hi Experts,
I have the following issue with my Redmi Note 2: /watch?v=BuM5bZECyDA
I have installed TWRP and rooted my phone with SuperSU-v2.46 but any ROM I apply, it's the same behavior as described in the video. What strikes me is that sometimes I have this behavior in TWRP also. That takes me to the conclusion that it's a sensor/touchscreen problem but why is not happening all the time it this is the issue? After I wipe the device, sometimes it's working for a few hours. I can configure the phone and sync to all my accounts.
If you know a custom ROM that I can install or you have any idea how to solve this, it will be appreciated.
Thanks in advance.
Hi everyone, I'm facing a severe issue with my Redmi Note 3 (Snapdragon variant).
Few days ago I noticed that the screen wasn't auto-rotating anymore, but I tought it was a temporary problem of my ROM (AICP official, latest nightly), so I passed by.
Yesterday I tried to format the phone from recovery and reinstall the ROM, without luck, the rotation wasn't working.
Then I tried to reset to the fastboot ROM (MIUI 7 6.3.17) through Mi Flash, I booted, and... now EVERY sensor has stopped working. Phone doesn't rotate, in cardboard app it doesn't move, brightness does not adjust automatically, screen doesn't turn off during call when putting the phone on the ear, and the compass is not working.
Also, apps like Lux say the value is -1 everytime, apps to re-calibrate the proximity sensor crash at startup, and I have a Settings force close when I enter security options to set up my fingerprint (only in CM13, from the MIUI7 setup I can register my fingerprint)...
So, I unlocked the bootloader then I tried to install MIUI8 but, IMEI was modified and WiFi wasn't working. I installed CM13 and restored NVRAM and everything (apart from the sensors) was working.
Now I re-flashed again with Mi Flash, and I can't SETUP the phone, because WiFi and cellular data are not working, and the phone is matched with my Mi account, and won't activate without login.
How can I fix all this mess? If needed, I can also take apart the phone.
Please, everyone, this is very urgent!
Thank you all in advance, and sorry if there are errors, as I'm writing this quickly.
HELL YEAH!
Ok, everyone, nevermind.
I FIXED IT!
It was the persist image that was corrupted. My bad I tought Mi Flash would reset everything, even persist. But I wasn't right.
I looked into the "flash_all.bat" script and "flash persist" wasn't there. Thanks Xiaomi for the headache.
2 days of searching on Google and I didn't find this thread, and I don't know how this is possible.
Now I just have to understand why this happened totally random.
Everyone that has this problem, refer to the thread up here, works like a charm!
Bye!
Thanks for sharing your solution. I learned something new.
Guys i have the same problem with my Redmi Note 4 when i rooted it successfully its sesor didn't work but after unrooting it again works well. So is there is any way to root the device without sensor fail???
SayanKar said:
Guys i have the same problem with my Redmi Note 4 when i rooted it successfully its sesor didn't work but after unrooting it again works well. So is there is any way to root the device without sensor fail???
Click to expand...
Click to collapse
Which root solution are you using?
SayanKar said:
Guys i have the same problem with my Redmi Note 4 when i rooted it successfully its sesor didn't work but after unrooting it again works well. So is there is any way to root the device without sensor fail???
Click to expand...
Click to collapse
Have you tried rooting with magisk?
J3is said:
Ok, everyone, nevermind.
I FIXED IT!
It was the persist image that was corrupted. My bad I tought Mi Flash would reset everything, even persist. But I wasn't right.
I looked into the "flash_all.bat" script and "flash persist" wasn't there. Thanks Xiaomi for the headache.
2 days of searching on Google and I didn't find this thread, and I don't know how this is possible.
Now I just have to understand why this happened totally random.
Everyone that has this problem, refer to the thread up here, works like a charm!
Bye!
Click to expand...
Click to collapse
Hi, the thread has been removed. Can you relink it?
Thanks a lot!!
J3is said:
Ok, everyone, nevermind.
I FIXED IT!
It was the persist image that was corrupted. My bad I tought Mi Flash would reset everything, even persist. But I wasn't right.
I looked into the "flash_all.bat" script and "flash persist" wasn't there. Thanks Xiaomi for the headache.
2 days of searching on Google and I didn't find this thread, and I don't know how this is possible.
Now I just have to understand why this happened totally random.
Everyone that has this problem, refer to the thread up here, works like a charm!
Bye!
Click to expand...
Click to collapse
This tip helped me fix my device after an year!!