Hello,
i have redmi note 3 snapdragon variant. i had installed cyanogen mod 13 kenzo in my phone. for some reason i wnanted to get back to the stock version. so i flashed stock rom from twrp which resulted in boot loop.
i tried flashing rom again from mi flash in edl mode. but it still wont boot. mi logo comes and then power off. what can i do? please help.
I did the same thing I flashed MIUI from TWRP when using cyanogen mod ROM. But when I clicked on reboot to system after flashing the ROM which showed "done" it warned saying there is no OS to boot to and stayed at Mi logo. Thankfully I backed up the previous ROM before starting the procedure so, I went to recovery(TWRP) vol up+ pwr and had reset the phone and flashed that backed up file. It worked. So, my advise is try to go in to recovery re-flash any backed up file or any custom ROM.
check ur bl status bro
It's happened with me many times ...there is a no big issue I guess , just check if ur bl status is unlock or not ..I guess ur bootloader must be locked that's why this is happening to check just put ur phn is fastboot mode connect usb cable n type in adb n fastboot command
Fastboot devices
Then
Fastboot device oem-info
. If locked unlock it using mi unlock tool
Hello guys,
i wanted to upgrade my Ressurection Remix ROM and managed to softbrick my phone. While flashing the software (Flashing system partition unconditionally) TWRP got stuck.
My phone got an unlocked bootloader and i already tried to flash the global MIUI ROM via EDL and also fastboot. The flashing process is successfull but after i restart my phone i'm stuck at the MI Logo with the moving Android Circles for loading.
I let this run for ~6 hours, no progress at all.
I also tried flashing the Global DEV Rom, same as above.
Factory Reset via Recovery Mode (with MI Suite) also didn't do the trick.
I think something with the bootloader went wrong. Any ideas to unbrick it?
I can access Fastboot and EDL Mode, unlocked Bootloader. I also got a TWRP backup with System and Data Partition, but currently only the original Revocery is installed.
Any help is very much appreciated, thank you.
Did you tried using this guide to flash stock firmware/recovery?
http://en.miui.com/a-234.html
Yes, the problem is not to flash the Fastboot ROM, but after successfully flashing the ROM i got stuck at the MI Logo with the loading Android dots
That's weird.. this bootloop usually happens when you flash stock MIUI and still have TWRP installed, can you check if you have stock recovery after fastboot flash?
After i flashed the global DEV ROM i got the stock recovery where i can choose between Wiping Data, switch to MI Suite etc.
Edit: Its not really an bootloop, it just gets stuck there without doing anything
Update: Got TWRP back, now if i want to flash any ROM (doesn't matter if stock/custom) i'm stuck at TWRP saying: "Patching system unconditionally..." it stays there for hours.
Any advice in this case?
guys,, i was facing same problem. I also agree that 8012... status does not matter to unlocking bootloader. I was tried all but fail after granted permission. I was tried daily. after 5 days when I tried with old mi unlock tool I got error at 50%. After that restarted my phone and clicked on settings and in developer menu, I watched i clicked on allow unlock bootloader but I forgot to click on usg debbuging. after clicked it I went for fastboot with old unlock tool and I got success. thankyou.
Try my method you will get success. hit like. stay tune. tandob is here to help you guys.
tandob said:
guys,, i was facing same problem. I also agree that 8012... status does not matter to unlocking bootloader. I was tried all but fail after granted permission. I was tried daily. after 5 days when I tried with old mi unlock tool I got error at 50%. After that restarted my phone and clicked on settings and in developer menu, I watched i clicked on allow unlock bootloader but I forgot to click on usg debbuging. after clicked it I went for fastboot with old unlock tool and I got success. thankyou.
Try my method you will get success. hit like. stay tune. tandob is here to help you guys.
Click to expand...
Click to collapse
That has absolutely nothing to do with the problem mentioned above.
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
CiDsTaR said:
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
Click to expand...
Click to collapse
If your device is Redmi Note 5 from other country but India then it´s Whyred and this Forum is for Redmi 5 Plus/Redmi Note 5 (only India) that is Vince.
In the case I´m right and your device is Whyred (two rear cameras is a simple way to note it) then as far as I know you will need an EDL authorized account to flash a rom through MiFlash Tool.
Other tool that you can use is XiaomiFlash Tool by Francesco Tescari through Mi-Recovery but you will need too have enable USB debugging (maybe you have) but the same way you can flash a rom also you´ll lose all your data.
Adb shell works only in rooted devices, you can´t backup nothing in this state and fastboot mode is limited to just few commands like list device/reboot devices and nothing more in locked bootloaders.
In this scenario you have two things in order to solve this issue:
1- Highly probable loosing all your data.
- Doing format data through recovery and try to boot (data lost for sure)
- Flashing a rom through recovery with the mentioned tool (99% data lost probabilities)
- Flashing a rom through EDL; if you have Vince you can do it but if you have Whyred I don´t think so (if you choose second option "Flash without erase userdata" in MiFlash Tool I guess your data will be preserved)
2- If you enabled before USB debugging and binded your Mi account with device wait the time to unlock bootloader and maybe booting first of all in TWRP you can recover some data from your device, if you unlocked but first of all you boot on system for sure all your data will gone.
So what happened? Were you able to solve it? PLs share if you were...
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
gldvs007 said:
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
Click to expand...
Click to collapse
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
RehanSiddiqui said:
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
Click to expand...
Click to collapse
BIG THANKSS, THIS HELP ME TOO
In my case my Redmi Note 7 MIUI 11.xx and had a update notification
im accidenly hold my power button my, and ALWAYS go to MI-Recovery 3.0 after several reboot
Im downloading that app and updating that app,
And copy the translate file from China to English (my pc WINDOWS 10 64x)
i chose "Connect to Mi Assistant" in phone connect to my pc and open the app, that can see my current ROM (MIUI 11.xx) can be update to "MIUI 12.xx" ,im flashing(updating) with "LEFT" option
that say "CAN SAVE UR SEVERAL FILES" than option RIGHT(DELETE ALL FILES) i guess i dont much remember
Im flashing(updating) with hope my files still in there,
The app start downloading the ROM and instaling to my phone 0% to 100%
My phone reboot and had notify "The system has been destroy"
After restarting several time, Im lossing hope on my phone,
Im trying hold my -Volume button while rebooting, then my phone booting on MIUI 12 in several minute
And "EVERYTHING ITS FINE" i have my all files,app,photos, just like my regular phone but have new MIUI 12 update Introduce changelog
I just wanna share my experience
THANK YOU A LOT
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Mi app recovery will not work on older phones like vince i suggest flashing through test point by removing the back cover and reconnect both points
mccholai said:
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Click to expand...
Click to collapse
it stuck at 99%
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
Just remove SD card & SIM tray from phone and restart. I work for me. try at our end. Don't flash or connect anything.
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
how u solved your problem , i am stuck in same stage .. help please
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
harsimran27 said:
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
Click to expand...
Click to collapse
were any files deleted? and do you perhaps know if it would work on redmi note 7?
hello guys just look this video i solved it
Hi all,.
I also faced the same issue my redmi note 5 Pro which was on I believe MIUI 10 because it was never updated from the day it was purchased got stuck in bootloop and not getting ahead after recovery mode no matter how much time you reboot it was all working fine but some apps were updating such as youtube when this incident occurred I tried every solution like pressing keys pressing all three keys simultaneously or ADB method but none could work since the phone was locked also there was no USB debugging so adb method wouldn't work to also if an if ADB connected I couldn't flash because it will remove the data, in recovery mod you can see in option connect with MI Assistant but the Indian English version shown no connection so found one youtube video (channel name -" Ach Sharif ", video link-
which helped to install chinese version and and solved login issues I used Google translate translate to read the Chinese characters and understand what is going on I connected the device intending to take a backup backup but as no option was available I had to click on flash device so it downloaded upgraded recovery rom and automatically flash to MIUI 11 but still same problem then again I connected and upgraded to MIUI 12 and the phone was able to boot so the phone finally got fixed all data and all apps were intact and working as originally also all data of WhatsApp chats etc remained even the open apps at the time when problem happened were still present.
I believe guys this is the only solution to the problem because while flashing it replaces the recovery module of the rom which was corrupted earlier in my case when MIUi 12 installed not 11 I feel that it replaced recovery module due to update and it was able to work so please try once and I hope you get your files back, now lesson learned please do regular backups to live worry free life otherwise we will be spending time and energy here only.
I believe ADB methods or other methods won't work because they will flash and you won't be able to get data only flashing through recovery ROM not fastboot rom just like update package will be able to solve your problem if it is a software problem it will be can be fixed fixed this way only and saving data if it's a hardware problem such as power of all volume buttons are stucked you just get change and everything will be fine it happened in my other phone redmi Y2 so from speaking from experience thats all as I was going through trouble these things really help me so I thought to spend time in creating this guide please follow and I hope it will be solved.
You must open back cover( easily you can do it by hair dryer) and disconnect and connect again the battery, it will fix
Hi,
I have a Redmi 3 that was shipped with xiomi.eu ROM on Android 5.1, there was no OTA Update so I decided to go on a original rom.
Bootloader is locked btw.
Now I tried several ROMs (old developer to the newest) via Mi Flash, there is no issue while Flashing (= sucessful) but it never boots. Now its in a unstopable bootloop to the cable connect screen - but Mi PC Suite does nothing.
I also tried several versions of MiFlash 2015/2016.
I can still access Fastboot and EDL Mode.
What do I wrong, why does no ROM boot?
https://r.tapatalk.com/shareLink?ur...share_tid=3498493&share_fid=3793&share_type=t
Follow this
Sent from my Phh-Treble vanilla using Tapatalk
Hi, I need an advice..I sent my renoir to service center and just get it back, but I can't no more enter in fastboot mode...
I tried manually and with ADB, but it"s stuck on MI logo....I ve tried factory reset, but its same...I'm on 13.0.5 EEA rom
I can reboot normally and the phone start....any advice
thanks
I have flashed many times, GSI and rom, ADB recognise the phone.....
I answer to my self..I have solved my issue with this
re-flash the current ROM you're using through the Updater app. It has that binary as part of the firmware and it should be unconditionally flashed.