Hi guys, i got my H9 yesterday and because i thought i read enough on this forums i wanted to unlock it then install TWRP and install superSU to gain root access and stick with the stock firmware.
Unlocking went perfectly fine,phone booted to OS, than i flashed twrp 3.1.1-1 as advertised here and made a factory reset. Phone was stuck in bootloop for unknown reason.
I made several wipes and somehow managed to check all boxes in the wipe menu which erased the whole OS.
Now i read here that others have the "no OS" problem too but because i still have all unlocked fastboot and twrp i wanted to ask which method is best to flash back the original FW.
Which stock ROM is safe to install? i have european H9 is STF-L09C432B170 the right one for me?
Which method is the best to install it? Copy the 3 zips to internal stoagre via OTG device and install it out of twrp? I read that there is also a force method where users can push vol up, vol down and power simultaneously and enter the huawei install force mode.
I am quite sad that the phone was stuck in bootloop after twrp install and still dont know what caused it. When i install it from twrp there are 3 zips: update, data full public , hw eu. In which order do they have to e installed and is one of them overwriting the TWRP recovery?
Please give me a short hint/procedure, im quite afraid that i cant get my phone back to work and it is brand new. I dont know what caused the unsolvable bootloop.
Best regards and many thanks
Hi.
Check this:
https://forum.xda-developers.com/showpost.php?p=73334439&postcount=1
This help you.
Regards
thanks for the hint but i cant find a solution for me there.
ut this
i copied the 3 .zip files to internal today but TWRP doenst allow me to write them it fails with "write err errno 9"
then i tried to copy the update.pp in DLOAD folder on micro sd but this is not possible because filesize is over 2gb. i tried to format micro sd with twrp to exfat but it till doesnt work. please give me a little hint what to do im completely desperate about the situation.
Today i installed Huawei Multitool and extracted the .img file out of the update.app files, i was able to flash all 4, system, boot, recovery and cust.
Now the rec. menu is back to stock and everything got installed but the phone still isnt booting. i think it is because i missed the userdata.img which i cant find anywhere.
Other users here have the same problem. Is there a firmware package which includes all 5 .img data?
Best regards
i found the official huawei service full repair firmware with all necessary files for unbrick (system, cust, recovery, userdata, boot) flashed them via fastboot but stil device is "hanging" after the warning message that its unlocked. i think it is because i wiped vendor data in twrp but i cant flash vendor.img in fastboot. it is included in the fw package but cant be transfered to phone via fastboot. it stops at part 1/2 because the filesize allowd is around 470mb max but the extracted file has a size of 670. anyone know what to do?
Best regards
You need to go via the Rebrand way with no rebrand. I had the same problem and was trying to use the multitool without success. The oeminfo can be flashed alternatively if it fails during the HWOTA process.
https://forum.xda-developers.com/honor-9/help/how-flash-oeminfo-t3657499
ok i download all the folders with the .bat file. Then i download C432B150 from the czech site and add it to the update folder. Than i rename the 3 files accoding to the manual and run the .bat file but without rebranding right?
Des this tool any different than the HuaweiMultiTool or fastboot with flash command?
Best regards
I treid out HWOTA, the first step installing twrp is successful than i disattach usb cable as described and enter twrp. Then it says in twrp i have to connect again and press enter but then the bat file stops and doenst go on. i dont come to the point where i can choose rebrand or flash firmware.
Whats wrong here?
edit: i saw in the .sh file that the script executes wait_adb but my phone is not entering adb mode as it seems when in main screen of twrp. is this normal or do i have to set it manually in twrp
best regards
I was able to install the B130 now via 3 button recovery. Now im on B130 but cant update elsewhere. Also the 2 capacitive buttons are not working. Bootloader is locked again. Everything is stock and the phone runs great. When i update with the 3 buton method from external sd, which firmware should i use? i tried B150 full OTA but it aborts after 5% with an error. Do i only need to get a small OTA package now?
How can i put my cap. buttons back to work? Too bad only the 3 button method worked to recover the phone.
Best regards and many thanks.
I did the HWOTA with b120 firmware and then used firmware finder to update to b150.
The bug with capacitive buttons is present till Oreo. I use the home button gestures anyways.
Hope it helps.
ok, thats bad but they worked with the initial revision of b130 and b150 when i downloaded it OTA. Is this something like a fuse like.knox at samsung which happens at custom flashing?
Sent from my GT-I9300 using Tapatalk
the HWOTA method doesnt work, the batch file gets stuck after connecting the phone in twrp back to computer. in script it says wait_adb but it is not recognized somehow.
do u know a solution? anotherone here got that problem too.
im very afraid of that, i read here that everything related to twrp 3.1.1-0 and 3.1.1-1 is problematic a lot of people cant boot after installing twrp and can wipe whtever they want the phone never boots fully
whats the difference in the B130/B120 the phone came from huawei and the version flashed via tools? when i got it everything worked
i have this version.
ok so install twrp have frq and bootloader unlocked and then do backup out of recovery? with your file? can you provide download link? is this then a zip file?
I want to solve the thread and how i solved problem.
The B130 service firmware by huawei could be installed via 3 button method, than i was able to go up to the newest B180 via firmwarefinder and DNS method but with not working cap. buttons and flash etc.
Yesterday i installed TWRP 3.1.1-1(temporary) via HWOTA.zip method (ireplaced the older twrp in recovery folder) and successfully installed B120 and got the buttons etc working again. Then installed root and now system works fine and is rooted. My mistake was to install twrp over B130 or B150 which i downloaded OTA at the first day i got the phone. I tested this yesterday to install TWRP along with B150 and unlocked bootloader, infinite bootloop again. With B120 the TWRP 3.1.1-1 works out of the box without any loops.
The 2 trouble solvers where B130 service firmware and HWOTA with B120.
The external SD had to be inserted in card reader on PC because of the large filesize of the B130.
I would recommend to everyone before starting to play with the H9 to move the B130 folders to phone while it is still accessible. When everything bricks like in my case and u still have twrp than you can go to twrp main screen and connect phone to computer to rename the folder with B130 to "dload" and arrange update.app accordingly on PC or in TWRP file manager.
Can i set this topic to [SOLVED] myself?
Best regards
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
this works flawlessly with 3 button method
Hello,
I write to tell you about my problem with a rear camera of my Huawei Y6 [SCL-l01][C432B140] and ask for any possible help. I really like to use it and i tried to get it back, but even after back to my firmware and stock recovery my camera doesn't work anymore[You cannot connect to the camera] after first rom flash.
Let's start from begining:
Once i decided to install custom rom on my phone, i done everything like it was on tutorials. I unlocked bootloader, i backup my data and i flash TWRP 3.1.2. Of course, TWRP didn't shown any error or issues, but my backup after restore, cause bootloop of my device and after second reboot startin recovery[not even bootloader of OS].
I tried many fixes to get my camera working on Custom Roms like AOSP, DARKNESS, CM,[ and few from HUAWEI Y6 thread] and I always fails. After few tries i gave up. My problem was that my backup was broken and my recovery was flashed by TWRP. Lucly i found stock recovery for my phone and flashed it.
Stock recovery gave my chance to install my stock rom from UPDATE.app, but after i install my stock lolipop 5.1 - my camera won't work anymore.[Can't connect to the camera, flashlight doesn't work too].
I tought to myself "hell, it could be problem that my original soft is modificated", but luckly i had two smartphnoes of my type SCL-l01[not mine ]. I took copy of working one by TWRP and flash it to my doesn't working... It gave the same result [I used TWRP by fastboot boot twrp.img for survive of my stock recovery] - camera simply wasn't work anymore even after flash the same firmware [once from update.app and second from another scl-l01]
And there is my question - Is it possible to get this camera working again?
Just pls - don't write to my about basics like clear cache or force stop etc , becouse i tried it all.
Thanks for every answer - and sry for my mistakes in my statement.
have the same problem for quite some time, I tried to return to stock with the update.app and the camera no longer worked, and I did not find a way to make the camera work. In stock it does not work, and in ROMS as LineageOS either, eh done the same thing to reinstall the update.app and neither, I think it could be a hardware problem
I clarify, I have a SCL-L03
link plzz
i ccant find the oficial room for scl-l01 cen you guys give me the link:cyclops::crying::crying::crying::crying::crying:
WantedG said:
i ccant find the oficial room for scl-l01 cen you guys give me the link:cyclops::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
http://huawei-firmware.com/rom/huawei-y6/scll01/1194
If you want to flash it, use huawei updater extractor and extract the system.img and boot.img from the update.app and flash it from fastboot.
Or if you have stock recovery make an folder Dload in sdcard and put the update.app here. After that, press power button and volume up and down (your phone needs to be shutdowned)
That's it.
Thanks button works well if I helped
Hello everyone,
so I have been playing around with my HTC U11. I unlocked the bootloader and installed the newst TWRP version. Then I flashed it to Lineage 16. However I could not install the HTC Edge Sense App and since I couldnt find any answers to that problem decided to flash back to stock rom and then update to Android 9.0 and get my Edge Sense back.
So I checked for my device CID which is HTC_034 and downloaded myself the stock rom from the getdroidtips stock firmware collection (cant post link because I am new)
I did the MD5 Checksum and everything was fine. However when I try to sideload it via adb i get a zip file corrupt error and TWRP stops it. Then I tried pushing it and installing it through the install function of TWRP. I can push it onto the device but when I want to install it I get the same error again. Things I tried so far:
1. used an older version of TWRP
2. all the 4 stockroms available for the HTC_034 on said link
3. load the .zip onto an sd card, enter it and tell TWRP to install from there - didnt work either.
4. rename the .zip to package.zip (read it somewhere)
Everytime I get the Error that the .zip is corrupt. Checksums of all the files are ok...
Has anyone an idea what else I can do? I would actually be fine with lineage 16 if I could just get my HTC Edge Sense back (
Thanks in advance for your help
Headcannon: what if the problem ia for some reason the twrp? Could i somehow flash the stock rom without going through the TWRP?
I am not talking about removing it. I am talking about somehow flashing without using it. Maybe via adb or odin?
Then the stockrom should be able to install. If something goes wrong I can still boot into recovery and use TWRP to get LOS16 back.
Ok so since I read somewhere that on the pixels root access was necessary to get HTC Edge Sense running I installed Lineage 16, added GAPPS and then used Magisk to get root access.
I still can't install HTC Edge Sense. I even downloaded the apk and pushed it onto the phone but the install always stops and tells me it can't finish
So for now I can neither have stock rom nor Edge Sense - any suggestions because I am slowly running out of ideas
how to revert to stock rom from pbrp , also i am unable to connect to connect to fastboot when its in bootloader i have also updated drivers but its still not working , it works on another pc but not mine any ideas need help
DId you take a backup of the stock recovery? If so, then place that stock recovery in the storage of your phone and simply flash it using pbrp. That should work.
And if you forgot to do that, download a stock rom from realme website for Realme 6. Open that rom using a program like Winrar, you will find a file named recovery.img. Extract that, place it in phone storage and then flash it in pbrp
so my xiaomi mi a3 have been having random restarts and now it only shows
“Can’t Load Android System Your Data May Be Corrupt”on the boot up screen. recovery mode is still available so i humbly ask if any of you have the V12.0.26.0.RFQMIXM OTA zip file i can use in ADB. would also ask if when i run that zip file i get to recover my beloved files. i don't want to factory reset yet without recovering my files. so yea i hope someone would help. the official roms are always unavailable.
Here, you can download V12.0.26.0.RFQMIXM https://xiaomifirmwareupdater.com/miui/laurel/stable/V12.0.26.0.RFQMIXM/
Type: Fastboot, worked for me without problems.
i've tried this already but the .tgz file wont come through.. i tried converting it to a zip file and didnt work too. so i'm just looking for the 10 mb OTA update. hope you can help me again. thanks for the help though.