Related
Ok guys, im at the end and need your help. I searched for this Problem since yesterday but couldnt find what describes my problems.
I think i did mistake after mistake, and yes im a noob, so feel free to dump on me what you got
Yesterday i wanted to update Sultan's CM ROM on my OPX, so i downloaded it and tried to install it over TWRP what gives me error messages. I made a factory wipe and installed OxygenOS 2.2.3 and then updated my TWRP to Sultan's new one (Version 3.0.2.3). After i flashed the .img, TWRP wasnt booting anymore, it was stuck on the 1+ Screen, but i was able to get to the System. So i get Root access over the SuperSU App and then flashed the TWRP zip over the Rashir App and TWRP worked again, then i flashed the new OxygenOS (3.1.3) what was successful. But now, TWRP wont work again. When i try to boot into recovery, it just show the 1+ Screen and Vibrates for maybe 1 second, but than it skips and boot automatically into System. The SuperSU App says its no SU File installed and can't be installed. Fastboot didnt't work either. When i connect it and type in ADB devices it shows me the ID. But with Fastboot devices nothing happens and im unable to do anything over it. (Drivers are correctly installed, without Signature check by windows etc.)
I know, i probably made some huge mistakes with all that. Do you guys have any solutions to get the Bootloader working again?
Thanks for any helps!
best regards
That recovery was for new BL and you flashed it over Old one.
Follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Adesh15 said:
That recovery was for new BL and you flashed it over Old one.
Follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Click to expand...
Click to collapse
Ok i will do that.
But just to be sure. After ive done this, im updating Oxygen to the newest Version and then install Sultan's newest TWRP and CM ROM?
Like i said, im not a Pro with it and i just dont want to fu** it up again.
Thank you.
Ulman2033 said:
Ok i will do that.
But just to be sure. After ive done this, im updating Oxygen to the newest Version and then install Sultan's newest TWRP and CM ROM?
Like i said, im not a Pro with it and i just dont want to fu** it up again.
Thank you.
Click to expand...
Click to collapse
Yup.
Will work fine.
DisclaimerThis software comes wth no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device.
Note: Currently Oreo 8.1 custom roms are supported only on BKL-L04 with EMUI 8.1
Download and Installation
* Download twrp recovery
* Start your device in fastboot mode
* Install the recovery using the following command:
Code:
fastboot flash recovery_ramdisk [name of the file].img --> ex: fastboot flash recovery_ramdisk twrp_blanc_0.1.img
* Restart with this command:
Code:
fastboot reboot
* As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP,so the device will boot to TWRP.This is to avoid that the device boot to OS,overwritting TWRP recovery.
Features
Internal storage decryption = working
MTP and OTG connection = working
Backup&Restore = working
Note: There are no sources for this yet,because is based on the work of @zxz0O0 ,from Honor 9 forum.
Credits
**** @zxz0O0 - This wouldn't be possible without this guy,so big big thank to him.I used his base to make this recovery work ,so in sign of respect his nick will also be on the TWRP boot screen.Thank again buddy!
**** TeamWin project ,obviously.
Download links
twrp_blanc_0.1.img - initial test release
twrp_bkl_0.2.img - OEMinfo partition is available for backup
twrp_bkl_0.3.img - /cache mounting is fixed,backup /vendor as image (vendor still can't be mounted)
twrp_bkl_0.4.img - /vendor mounting/unmounting is now fixed (thx @ante0 for the script)
twrp_bkl_0.5.img - mounting/unmounting issues shound be fixed , added a new option to exclude OEM path from wiping with Factory Reset and can be enabled/disabled in settings (thx Team OpenKirin for this), this version will work even with newer updates that bump security patch version.
twrp_bkl_0.6.img - Cache wiping issue is now fixed
twrp_bkl_0.7.img - fixed decryption on EMUI 8.1 (now you can use the same password/pin/pattern to decrypt in TWRP), /recovery_ramdisk no longer available for backup./vendor no longer available for backup (use /vendor_image instead),/system and /data can be unmounting issue with 8.1 devices is now fixed.
Pretoriano80 said:
Internal storage decryption = working
MTP and OTG connection = working
Backup&Restore = working
Click to expand...
Click to collapse
Thanks man! :laugh: Need to test this!
IcipherPT said:
Thanks man! [emoji23] Need to test this!
Click to expand...
Click to collapse
No problem! Please report back if it's working or not.
Pretoriano80 said:
No problem! Please report back if it's working or not.
Click to expand...
Click to collapse
wipe everything to decrypt?
ngoralph said:
wipe everything to decrypt?
Click to expand...
Click to collapse
Nope, just decrypting, like you do when your phone is starting and asks for PIN! [emoji6]
Pretoriano80 said:
No problem! Please report back if it's working or not.
Click to expand...
Click to collapse
Just tested on my honor view 10. It was asking for a password to decrypt. I entered my lockscreen pass and everything was decrypt.
so TWRP CAN decrypt
@youtuber123
did you try a nandroid backup?
youtuber123 said:
Just tested on my honor view 10. It was asking for a password to decrypt. I entered my lockscreen pass and everything was decrypt.
so TWRP CAN decrypt
Click to expand...
Click to collapse
Ok, so it's working!Great,please let me know if something it's broken (backup, restore, MicroSD mounting, etc).
Pretoriano80 said:
Ok, so it's working!Great,please let me know if something it's broken (backup, restore, MicroSD mounting, etc).
Click to expand...
Click to collapse
nandroid (backup and restore) is working
mtp is working too
and micro usb mounting is working
didn't tested to flash something using twrp
youtuber123 said:
nandroid (backup and restore) is working
mtp is working too
and micro usb mounting is working
didn't tested to flash something using twrp
Click to expand...
Click to collapse
There's not much stuff to flash for this device! [emoji16]
Good, finally a useful twrp....
Can we flash LOS using this now?
@Pretoriano80
tried your recovery at my view 10. flashed it via fastboot. had no success. your twrp is hanging at the start screen. tried to flash it via the twrp of dees_troy, the same result. recovery is not booting completely, remains at the twrp start screen. any ideas?
kurvenmeister said:
@Pretoriano80
tried your recovery at my view 10. flashed it via fastboot. had no success. your twrp is hanging at the start screen. tried to flash it via the twrp of dees_troy, the same result. recovery is not booting completely, remains at the twrp start screen. any ideas?
Click to expand...
Click to collapse
Which version? Another user reported that is working.
Edit: More details about your device?Which version do you have exactly?
the twrp_blanc_0.1.img
the dl-link of twrp_bkl_0.2.img is not working
kurvenmeister said:
the twrp_blanc_0.1.img
the dl-link of twrp_bkl_0.2.img is not working
Click to expand...
Click to collapse
Ok thank,link is fixed .but if the initial one didn't booted ,i don't think this will do.Which version of Honor 10 do you have (european,usa,etc)?I'm not sure it will work on the US version or any other version which is based on Oreo 8.1.
@Pretoriano80
dl-link worked. tried the second version of your recovery. still no success. it is hanging at the start screen. nothing else happend. european bkl-l09, resurrection remix, oreo 8.1
kurvenmeister said:
@Pretoriano80
dl-link worked. tried the second version of your recovery. still no success. it is hanging at the start screen. nothing else happend. european bkl-l09, resurrection remix, oreo 8.1
Click to expand...
Click to collapse
The custom rom might be the culprit!I didn't tested on custom roms.
Pretoriano80 said:
Ok thank,link is fixed .but if the initial one didn't booted ,i don't think this will do.Which version of Honor 10 do you have (european,usa,etc)?I'm not sure it will work on the US version or any other version which is based on Oreo 8.1.
Click to expand...
Click to collapse
Hey mate nice to see you here
Nice job with the recovery! I've been handed out an US View 10 a couple weeks ago (with Android 8.1 pre-release stuff), I'll test it out for you.
twrp-3.2.1-0-berkeley.img didn't boot on BKL-L04 (dark screen and reboot), but Ethan made some changes and twrp-3.2.1-1-berkeley.img does work fine.
I've been told that some selinux changes were needed to boot 8.1 stuff, some critical service that fails to run because it can't find the right policy, something related to recovery_vendor partition that runs it.
It will work in 8.0 setups also just fine.
I'll let you know how it goes :fingers-crossed:
Hope we get 8.1 kernel sources soon so I blu_spark this blue beauty
Rommco05 said:
I succesfuly make full backup (except data) and flashed busybox. I dont need decrypted data all seems to be fine. In backup section just missing OEM
Click to expand...
Click to collapse
Latest version should have Oeminfo available for backup! Did you tested that version?
eng.stk said:
Hey mate nice to see you here
Nice job with the recovery! I've been handed out an US View 10 a couple weeks ago (with Android 8.1 pre-release stuff), I'll test it out for you.
twrp-3.2.1-0-berkeley.img didn't boot on BKL-L04 (dark screen and reboot), but Ethan made some changes and twrp-3.2.1-1-berkeley.img did.
I've been told that some selinux changes were needed to boot 8.1 stuff, some critical service that fails to run because it can't find the right policy, something related to recovery_vendor partition that runs it.
It will work in 8.0 setups also jsut fine.
I'll let you know how it goes :fingers-crossed:
Click to expand...
Click to collapse
Hi! My favourite kernel developer is here, nice!
I have a guess on what may be wrong, but i'm not sure. Let me know if you figure out! [emoji6]
View attachment 5472077
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
*/Your warranty is now void.
We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or recoverys, kernels.
You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers./*
Click to expand...
Click to collapse
FLASHING GUIDE
you must need to unlock your bootloader
Click to expand...
Click to collapse
1. adb reboot bootloader
3. fastboot flash boot twrpname.img
4. fastboot reboot recovery
note! will ask a password to decrypt or to see internal storage just put the password (optional if your device have a password or pattern,pin)
5. flash magisk-v23.0.zip (optional)
6. then reboot system. done!!
Click to expand...
Click to collapse
INFORMATION!
- device is shipped as android 11 , and device don't have recovery partition meaning its virtual A/B its use recovery as boot check here (for more info)
NOTE FOR FLASHING!!
- If you face wifi Problem use twrp_a or twrp_b .
- If you want to root your device flash magisk already included in *.zip (Don't use official one because you will face bootloop)
DOWNLOAD
download twrp_a
download twrp_b
MAGISK FOR ROOTING
credits: to topjohnwu
DOWNLOAD MAGISK
WHAT WORKING ?
- Decryption
- flashing payload.pin / recovery rom (note! if you want to flash rom or modify your device just back up your imei please)
- fastbootd
- etc.
- for the bug just tell me.
DEVICE TREE
DEVICE KERNEL SOURCE
CREDITS
- TEAM WIN FOR RECOVERY
- TESTER'S FROM INDONESIA
- TOPJOHNWU for magisk
- @osm0sis for the A/B installer script
BUILD BY:
t.me/myusernameiswhat @mastersenpai05)
link of b not working
Abdullah.Csit said:
link of b not working
Click to expand...
Click to collapse
Done sir
thanks!
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
symbuzzer said:
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
Click to expand...
Click to collapse
If you got unlocked bootloader device then you ready to go.
try "a" if you got wifi issues then use "b".
symbuzzer said:
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
Click to expand...
Click to collapse
You need tool to unlock your bootloader, you can use a mi unlock tool you need to wait 7days, or if you want to unlock that instantly you need other tool
TWRP will be updated after I successfully done my experiment
is just need flash a or b anyone is ok ? or need flash both ?
How to backup imei?
Is there any way to flash TWRP permanently?
"With the new TWRP 3.6.0, things will be a little different. After you temporarily boot the TWRP image using the ‘Fastboot boot’ command, you will be able to see a Flash Current TWRP in the Advanced section of custom recovery."
Is this working?
symbuzzer said:
How to backup imei?
Is there any way to flash TWRP permanently?
"With the new TWRP 3.6.0, things will be a little different. After you temporarily boot the TWRP image using the ‘Fastboot boot’ command, you will be able to see a Flash Current TWRP in the Advanced section of custom recovery."
Is this working?
Click to expand...
Click to collapse
Will not
why not?
Hi. Thanks for the development
I have a question. Assuming that I've flashed this twrp, how do I properly backup the entire phone, I mean which one will be selected in backup option . I want to flash some custom roms and restore the created backup if something goes wrong
09kkthxbb said:
Hi. Thanks for the development
I have a question. Assuming that I've flashed this twrp, how do I properly backup the entire phone, I mean which one will be selected in backup option . I want to flash some custom roms and restore the created backup if something goes wrong
Click to expand...
Click to collapse
NO advisable, Do not try this way!
I have a bad experience with this method, I have a Note 8 pro (Begonia), i did a rom backup with twrp, then flashed other custom roms, after few tested on various roms, i decided to get back to Miui rom, thinking of the easy way, I restored its Miui backup images via twrp, the phone bricked. In the end, I had to sent to xiaomi service center for repair.
I believe that was due to different version of Preloader of rom crashed with TWRP.
Of course, with some "MTK auth bypass softwares" available today, you may take the risk if you wish.
Could anyone provide here any already backup of Chopin stock recovery share it here, please?
Edit: Since there is no recovery partition, You had just re-flashing "boot.img" by twrp then you will restore stock recovery and that operation will also let you lose your root.
Is this compatible with x3 gt global 12.5.7 update?
koolkattt said:
Is this compatible with x3 gt global 12.5.7 update?
Click to expand...
Click to collapse
Hi man, we tried this as well.
We rollback to the old version for now just to have a working root access.
являетсяIs there any localized firmware on this device? will they?
koolkattt said:
Is this compatible with x3 gt global 12.5.7 update?
Click to expand...
Click to collapse
Sure, im runnign this version and works good with magisk
folken2003 said:
Sure, im runnign this version and works good with magisk
Click to expand...
Click to collapse
how to make work? I try many way also bootloop, can share step by step to success ? thanks
#include <std/disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
This is the file you are looking for
Port from Redmi Note 8
Tested on latest firmware (1.06.709.1)
NOT working:
TOUCH -- mouse only
Fastboot boot is broken
Working:
Install zip/Wipe/Restore
MTP/Usb-otg/Micro SD card
Partially working:
Backup -- only super and ESD partition
Automatic mount internal storage -- please go to backup and refresh the partition size
Data Decryption
Installation:
Fastboot flash recovery xxx.img(file name)
Download links:
bym_twrp_port.img
IMG File
1drv.ms
Reserved
wow
Tested, can confirm it is working.
Thanks for the hard work!
Does it work in build number 1.00.468.1?
text1 said:
Does it work in build number 1.00.468.1?
Click to expand...
Click to collapse
yes, I am on 1.00.468.1
tofumachine said:
yes, I am on 1.00.468.1
Click to expand...
Click to collapse
Thank you for your answer.
Were you able to find Stock ROM or Stock Recovery Build number 1.00.468.1?
Were you able to root the phone?
text1 said:
Thank you for your answer.
Were you able to find Stock ROM or Stock Recovery Build number 1.00.468.1?
Were you able to root the phone?
Click to expand...
Click to collapse
I can successfully installed magisk and I think this will also work for other builds
4096abcd said:
TOUCH -- mouse only
Click to expand...
Click to collapse
I'm not sure what this means. Does this mean I can't use the touchscreen in the TWRP interface? I don't have a mouse for mobile, only a mouse with standard USB (for laptop/PC).
henrychess said:
I'm not sure what this means. Does this mean I can't use the touchscreen in the TWRP interface? I don't have a mouse for mobile, only a mouse with standard USB (for laptop/PC).
Click to expand...
Click to collapse
You need an a to c adapter
4096abcd said:
I can successfully installed magisk and I think this will also work for other builds
Click to expand...
Click to collapse
Is your phone rooted now !?
root checker, okay!????
4096abcd said:
You need an a to c adapter
Click to expand...
Click to collapse
Is it possible to patch the touch issue? (I'm not a pro, I don't know how to do it)
Do you take a picture of the root checker program?
twrp version number Redmi Note 8 ported !!!???
Thanks for your hard work. By the way, can you provide a pached by Magisk boot.img? If so, it would be very useful. Thanks again.
iourikil said:
Thanks for your hard work. By the way, can you provide a pached by Magisk boot.img? If so, it would be very useful. Thanks again.
Click to expand...
Click to collapse
Hello
I tried to create a patched boot file of magisk program and put it here for you.
build number : (1.00.468.1)
Hi
i need Stock recovery build number 1.00.468.1...
text1 said:
Hi
i need Stock recovery build number 1.00.468.1...
Click to expand...
Click to collapse
If you want a stock recovery just flash magisk boot and dd out the recovery partition
4096abcd said:
If you want a stock recovery just flash magisk boot and dd out the recovery partition
Click to expand...
Click to collapse
i flash twrp recovery,I want to install recovery instead of twrp.
Is it possible to unlock bootloader without wiping your data?
I can easily backup my /storage/emulated/0, but if all data is wiped out, then I have to reinstall all the apps (which takes a ton of time) and save all my passwords again.
Hello
I think my phone is brick, does anyone have an ota ROM file (stock rom) to install?
Another question:
How can I install the tar.gz file on the HTC D20PRO phone! ??
OmniROM - zenfone9
Anyone tested?
Not yet, but now that I know it's out, maybe at the week end.
Thanks for sharing the info!
Hello, anyone knows how to install it?
I tried it with offcial twrp but no luck
josepmaria said:
Hello, anyone knows how to install it?
I tried it with offcial twrp but no luck
Click to expand...
Click to collapse
Why you couldn't install? You got an error or something else?
palamosteliaro said:
Why you couldn't install? You got an error or something else?
Click to expand...
Click to collapse
I fastboot flashed official twrp, and then sideloaded omnirom. Didn't boot. Asus logo only
josepmaria said:
I fastboot flashed official twrp, and then sideloaded omnirom. Didn't boot. Asus logo only
Click to expand...
Click to collapse
I'm sure this is obvious, but u did rest data and stuff?
Darkmasterhk said:
I'm sure this is obvious, but u did rest data and stuff?
Click to expand...
Click to collapse
Didn't know. Can you help me?
Hi guys
[ROM][OFFICIAL] OmniRom for zenfone9 [Android-13.0]
What is Omnirom ? Selinux Status: Enforcing Instructions : Follow this Steps by steps * Remove all Security pwd/pin/pattern on you current Rom * Download the ROM (see Dl section) * Download TWRP recovery and installer zip (see TWRP section)...
forum.xda-developers.com
enjoy
josepmaria said:
Didn't know. Can you help me?
Click to expand...
Click to collapse
Well, as there is now an official thread, better follow that. Gonna do the same at the weekend.
But yeah, the wipe user data step is important.
josepmaria said:
Didn't know. Can you help me?
Click to expand...
Click to collapse
I had the same issue. You need to go into bootloader. For me it only worked holding volume down + power button to reboot the device, then quickly volume up while it is rebooting to get into bootloader. From there you should be able to flash TWRP again with "fastboot flash recovery twrp-3.7.0_12-0-AI2202.img". Go in into TWRP then "Format Data". Reboot into TWRP and push stock .zip to device "adb push UL-ASUS_AI2202-ASUS-33.0804.2060.100-1.1.1-2302-user.zip /sdcard" + trwp installer .zip - In my case I was only able to do that without clicking on ADB sideload in TWRP. Then install stock .zip and twrp installer from /sdcard. Phone should be able to boot now. After first boot you should be able to access data parition fomr PC again, as well.