I had bought this tablet used with an existing google account on it. I was able to add my existing Google account to the tablet. Over the period of 4 months I've sent multiple emails to the address of the other Google account advising them that I purchased this used and if it was lost or stolen from them I would like to return it otherwise please remove your Google Account from it. I've had no response to the request.
I did a factory reset on the tablet and I get to the point where it wants me to sign in with a Google Account that was on the device before.
I tried to sign in with my Google Account, I get to the point where 2FA kicks in and I hit yes on my phone.
It then says Unable to sign in due to an unknown error and to wait 24 hours.
Any help on getting past this will be appreciated.
@ElevyNJ
What's the real model name of the tablet?
jwoegerbauer said:
@ElevyNJ
What's the real model name of the tablet?
Click to expand...
Click to collapse
The model is QTAXIA1 with an FCC If of HFS-QTAXIA1
ElevyNJ said:
The model is QTAXIA1 with an FCC If of HFS-QTAXIA1
Click to expand...
Click to collapse
Couldn't retrive SoC ( chipset manufacturer ) of this Verizon Ellipsis 10 HD Tablet QTAXIA1, what must be known in order to remove a FRP lock, if ever possible.
jwoegerbauer said:
Couldn't retrive SoC ( chipset manufacturer ) of this Verizon Ellipsis 10 HD Tablet QTAXIA1, what must be known in order to remove a FRP lock, if ever possible.
Click to expand...
Click to collapse
According to GFX Bench https://gfxbench.com/device.jsp?benchmark=gfx50&D=Verizon+Qtaxia1&testgroup=info the SOC is SoC: MediaTek MT6755 (Cortex A53 - ARMv8)
ElevyNJ said:
According to GFX Bench https://gfxbench.com/device.jsp?benchmark=gfx50&D=Verizon+Qtaxia1&testgroup=info the SOC is SoC: MediaTek MT6755 (Cortex A53 - ARMv8)
Click to expand...
Click to collapse
Try this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good news is I did confirm it is the Media Tek
Bad News is I keep getting the message
BROM ERROR: status_sec_auth_file_needed (0xC0030012)
[HINT:]
ElevyNJ said:
Good news is I did confirm it is the Media Tek
Bad News is I keep getting the message
BROM ERROR: status_sec_auth_file_needed (0xC0030012)
[HINT:]
Click to expand...
Click to collapse
Ok I switched to the Linux version running on Ubuntu 20.04 I pressed Start then plugged in the tablet. I then got the following messages
support_dl_cert_to_storage: 0
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-12
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:0E8D:20FF.0008
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:0E8D:20FF.0008/hidraw/hidraw0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:0E8D:20FF.0008
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb1/1-12
And that is where I sit. No activity on the tablet or in the app. The tablet appears off.
Related
Hello,
First of all, my phone is an Huawei P8 Lite ALE-21, bouth in September 2016, it's ROOTED, I've followed this thread to change the ROM : https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994, to see if was changing anything... (nothing has changed I reassure you)
I'm getting a problem when I want to share my 4G/3G/2G connection to any devices with the Wifi access point :
Using the default parameters in the phone :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The users can connect, get an IP, and communicate with others without any problems, but here comes the troubles ;
When the connected users want to use the Internet, they open a web browser page and, they are automatically redirected to this kind of page :
Yeah I'm French, but this is saying that "YOU HAVE TO PAY FOR SHARING YOUR CONNECTION!", and I'm not hating capitalism but... I really want to find an other way instead of... PAYING.
This is what I tried :
1 - Changing the ROM to an official Huawei's one -> didn't worked
2 - Trying Cyanogen -> did not detected my SIM, so didn't worked
3 - Trying a dozens of application of transmitting the wifi -> didn't worked
This is what I'm thinking about:
1 - First option, the problem should come from the routing of my phone, which is maybe asking an new IP to the operator... Which has detected it. LUCK ! I'm rooted so in the theory I can break anything in my phone (Changing the Routing tables?).
2 - Second option, my operator HAS FULLY DISABLED THIS FEATURE TO EARN MORE AND MORE MONEY. Wrong, my old phone still can do it (Wiko IGGY) with my current SIM card.
What solution should work in any cases:
1 - Explode my phone into a wall
2 - Buy an IPhone 12
3 - Ask xda-developers who as SOO helped me before <3
I hope somebody has a solution... Else I think I will change my phone...
Thanks for helping me!
Waymix, a nervous student.
G’day Xda
As per a previous post of mine (https://forum.xda-developers.com/huawei-p20-lite/help/help-error-mode-boot-loop-access-to-t3831058) I am attempting to revive my P20 lite.
This has turned into a bit of personal project for me so with that I’ll point out I am not interested in paying for any proprietary software or hardware that seems readily available. I am only making use of open source software and putting together my own hardware where I can.
Is there anyone who is able to advise me where on the main board (Pics attached) I can find the Test Point and if possible knows where I can get hold of a copy of the Board software/firmware (apparently this is different to the normal phone software which is readily available???)
Any help/clues/advice would be greatly appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my iPhone using Tapatalk
It Is too late now I guess, but did you try to send the unopened phone to Huawei for a warranty replacement?
I am aware they don't replace phones that have been modded. But by the time you were receiving the upgrade system error I am sure there was no possible way to see if you caused the error or the phone did itself through some freak accident software bug.
do you still have phone with you?
mutahharbashir said:
do you still have phone with you?
Click to expand...
Click to collapse
Almost a full year later and yes i still have it. HaHa
Selfi kamera not working after new apdate 9.1 front camera is of plis help me tenk you
https://prnt.sc/q8x4u7
https://mega.nz/#!XRpmUQiZ!-KfnY2ycR_jRO64Qqgf_dyKMuje2QxKYwydlb-eQUp8
uhm... I think it worked? I booted into a rom and it says huawei ascend now... wtf is going on
i have a p20 lite stuck at bootloop. (shows Huawei logo with "powered by android" at bottom. no boot animation or loading animation.
can not enter recovery or download mode.
can not power off. Will test point method work for my p20 lite?
Hey guys, firstly I'm new about Custom Roms so maybe I made a mistake sorry about that.
I'm trying to install TWRP on my LG L Bello(D331). When I look at LG developer's website they want my phones IMEI and Device ID(because if you open bootloader LG must send you a key and you can open). So When I look at my device ID it is 16 letters long. When I entered my device ID in the site, I see an error "device-id must be 64 characters long". So how can I find my 64 letters long Device ID? Sorry for my bad English.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
@Salihk123
Android_ID ( equivalent to device-id ??? ) what since Android 8.0 and higher versions is a 64-bit number (expressed as a hexadecimal string) is stored in Android's settings.db. If your phone is rooted, then you can retrieve it by means of ADB:
Code:
adb devices
adb shell settings get secure ANDROID_ID
jwoegerbauer said:
@Salihk123
Android_ID ( equivalent to device-id ??? ) what since Android 8.0 and higher versions is a 64-bit number (expressed as a hexadecimal string) is stored in Android's settings.db. If your phone is rooted, then you can retrieve it by means of ADB:
Code:
adb devices
adb shell settings get secure ANDROID_ID
Click to expand...
Click to collapse
my phone is only for android 5.0 . So does it means I can't open my phone's bootloader? Is there another way?
Salihk123 said:
my phone is only for android 5.0 . So does it means I can't open my phone's bootloader? Is there another way?
Click to expand...
Click to collapse
May be my code sample is also valid for Android 5: don't know it. Simply try it out Remember: Phone must be rooted!
BTW: In the world of Android the bootloader is that what in the world of Windows is the BIOS.
jwoegerbauer said:
May be my code sample is also valid for Android 5: don't know it. Simply try it out Remember: Phone must be rooted!
BTW: In the world of Android the bootloader is that what in the world of Windows is the BIOS.
Click to expand...
Click to collapse
I look and no it's just 16 letter code. Thanks for your help and advice.
Well, it's a bit of a long story, so I'll try to be as short as possible.
Last year, and after hours of searching on the internet, I found the solution for "Custom binary blocked by frp lock" on this forum (here and here). Both methods promised to fix the lock without erasing my data, but I decided to try the second one (it consists of reinstalling only the boot image with Odin).
Fortunately it worked for me on the first try, and since this method was not well known on the internet, I decided to make a video tutorial to help those who had the same problem and wanted to keep their data.
The fact is that, unfortunately, this method didn't work for everyone, and in many cases it generated bootloops or black screens of death.
And my question is: does anyone know what could be the cause of this?
I tested it on SM-J710MN and SM-G532M, both running Android Marshmallow, and the bootloops/black screens occurred on devices running Android 6, 7, 8 and (I guess) 9 and 10.
Starting with Android 6 FRP on any such Android device is automatically enabled once a Google account is logged in to a device. The only way to get rid of it is by removing the account from the device into which it has been synced.
jwoegerbauer said:
Starting with Android 6 FRP on any such Android device is automatically enabled once a Google account is logged in to a device. The only way to get rid of it is by removing the account from the device into which it has been synced.
Click to expand...
Click to collapse
Thanks for answering.
Maybe I did not express myself in the correct way, but actually I was referring to the block that does not even allow to boot the device and only shows words in red, as seen in this image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But beyond that my question is about why does the bootloop or black screen happen after flashing the boot.img file? Does it have to do with a different/incompatible version of Android/binary/csc or something like that?
i have a Samsung S23 Ultra that is frp locked and i cant remember which account was signed in. Is there any way to turn it off? I own the phone.
SweetT357 said:
i have a Samsung S23 Ultra that is frp locked and i cant remember which account was signed in. Is there any way to turn it off? I own the phone.
Click to expand...
Click to collapse
Try SamFW app. It has an option to reset FRP.
A search on YouTube would help as well.
if you have proof of ownership you can go to a Samsung service center, maybe they can help.....
s3axel said:
if you have proof of ownership you can go to a Samsung service center, maybe they can help.....
Click to expand...
Click to collapse
i dont have a service center within 75 miles of me
JazonX said:
Try SamFW app. It has an option to reset FRP.
A search on YouTube would help as well.
Click to expand...
Click to collapse
ive tried everything. every trick every free tool, odin samfw frp mtp bypass. none of it will work. wifes gonna kill me if i dont get it fixed, spent way too much for it. locked it up 3 months in.
try
[FREE] Any Android Version | Any Binary Samsung FRP Unlock
Samsung FRP Unlock -- Any Android Version Any Binary! No need to dial *#0*#. Just plug your phone into your PC. For Admins and Mods Here: How this works? There is no remote connection involved in this operation only user's USB connection is...
forum.xda-developers.com
His phone has been already unlocked successfully
[FREE] Any Android Version | Any Binary Samsung FRP Unlock
Samsung FRP Unlock -- Any Android Version Any Binary! No need to dial *#0*#. Just plug your phone into your PC. For Admins and Mods Here: How this works? There is no remote connection involved in this operation only user's USB connection is...
forum.xda-developers.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}