[ROM][11][UNOFFICIAL] LineageOS 18.1 [SURYA][KARNA][15.01.2021] - Xiaomi Poco X3 NFC ROMs, Kernels, Recoveries, & Ot

[ROM][11][UNOFFICIAL] LineageOS 18.1 [SURYA][KARNA][15.01.2021] - Xiaomi Poco X3 NFC ROMs, Kernels, Recoveries, & Ot

Finally!

Lineage OS 18 with Android 10 base? Shouldn't it be Android 11?

shorty.marten said:
Lineage OS 18 with Android 10 base? Shouldn't it be Android 11?
Click to expand...
Click to collapse
It's Android 11

Hi,
if i com from Android10 (pixelexperience) flashing produces Error 1
working solution:
- flash nitrogenos 11
- flash lineageos

Linked below is a package that has come from another Android project that restore the Google parts.
Click to expand...
Click to collapse
What does that mean ? Gapps included by default ?

Xfirstname said:
What does that mean ? Gapps included by default ?
Click to expand...
Click to collapse
yes!

volkix2 said:
yes!
Click to expand...
Click to collapse
Doesn't make sense to me, I would wait a little bit more

Xfirstname said:
Doesn't make sense to me, I would wait a little bit more
Click to expand...
Click to collapse
for me, it makes sense. for now, no official opengapps 11 available and my experience with nitrogenos and nikgapps offers problems for daily usage.

Dev , Selinux enforcing or permissive ?

volkix2 said:
yes!
Click to expand...
Click to collapse
volkix2 said:
for me, it makes sense. for now, no official opengapps 11 available and my experience with nitrogenos and nikgapps offers problems for daily usage.
Click to expand...
Click to collapse
Depends on why you want to get rid of MIUI, personally it's to avoid Google's bloat and run ( mostly ) free and open source software, if tommorow a linux distro shipped with Microsoft Edge or whatever I would make sure to not touch it, I guess that's why people are into LOS, but hey I'm sure many people don't care tho, if it wasn't a thing nobody would put instructions to install gapps after all

Xfirstname said:
Depends on why you want to get rid of MIUI, personally it's to avoid Google's bloat and run ( mostly ) free and open source software, if tommorow a linux distro shipped with Microsoft Edge or whatever I would make sure to not touch it, I guess that's why people are into LOS, but hey I'm sure many people don't care tho, if it wasn't a thing nobody would put instructions to install gapps after all
Click to expand...
Click to collapse
That's the point of LOS ... A vanilla android distribution so people can run Android Googleless with other stores , side loading , etc , but sadly like Paranoid Android now start building with gapps (less problems) , I don't know the point , the reality is that people is caring less for Google tracking business...
People calls Pixel Experience "stock" ... For me that's Google's layer not stock, stock is AOSP more like LOS or AOSPA ...
But remember , no custom vendor , first build, let's not complain..

Anyone can post some screenshots for this working

Does anyone have any luck with Magisk? It seems to be flashed but doesn't want to work when booted, I'm using OrangeFox recovery to flash
---------- Post added at 12:33 PM ---------- Previous post was at 12:13 PM ----------
jutley said:
Anyone can post some screenshots for this working
Click to expand...
Click to collapse
Well it works for me, I'm just trying to get magisk to work now, make sure you're on a global firmware/vendor

davidhozic said:
Does anyone have any luck with Magisk? It seems to be flashed but doesn't want to work when booted, I'm using OrangeFox recovery to flash
---------- Post added at 12:33 PM ---------- Previous post was at 12:13 PM ----------
Well it works for me, I'm just trying to get magisk to work now, make sure you're on a global firmware/vendor
Click to expand...
Click to collapse
1)I am on MIUI 12.0.3 12.0.3.0(QJGEUXM) is this okay? This is the UK official version with UK plug
2)Also i want to know will Banking apps still work if just flash the firmware? or i need to use Magisk to do the Magic?
3)And when flashing this rom first time what do you need to do in twrp wipe settings
4)Is the Gapps inc?

jutley said:
1)I am on MIUI 12.0.3 12.0.3.0(QJGEUXM) is this okay? This is the UK official version with UK plug
2)Also i want to know will Banking apps still work if just flash the firmware? or i need to use Magisk to do the Magic?
3)And when flashing this rom first time what do you need to do in twrp wipe settings
4)Is the Gapps inc?
Click to expand...
Click to collapse
1.)I tried flashing Resurrection Remix (based on lineageos) from the EU rom and it did boot but wifi wouldn't work, might for you idk
2.) My bank app does open however it detects root and closes, haven't set up magisk hide yet
3.) I did factory wipe and then format data -> reboot to twrp again to recreate the data partition and then flashed
4.) Google apps are included

davidhozic said:
1.)I tried flashing Resurrection Remix (based on lineageos) from the EU rom and it did boot but wifi wouldn't work, might for you idk
2.) My bank app does open however it detects root and closes, haven't set up magisk hide yet
3.) I did factory wipe and then format data -> reboot to twrp again to recreate the data partition and then flashed
4.) Google apps are included
Click to expand...
Click to collapse
So which stock firmware must i be on prior to flashing this? is 12.0.3.0(QJGEUXM) not sufficient enough to use as a base?

jutley said:
So which stock firmware must i be on prior to flashing this?
Click to expand...
Click to collapse
V12.0.3.0.QJGMIXM , you don't need to flash the entire rom, you can just flash the vendor https://sourceforge.net/projects/nitrogen-project/files/surya/10.0/firmware%2Bvendor/

davidhozic said:
1.)I tried flashing Resurrection Remix (based on lineageos) from the EU rom and it did boot but wifi wouldn't work, might for you idk
2.) My bank app does open however it detects root and closes, haven't set up magisk hide yet
3.) I did factory wipe and then format data -> reboot to twrp again to recreate the data partition and then flashed
4.) Google apps are included
Click to expand...
Click to collapse
davidhozic said:
V12.0.3.0.QJGMIXM , you don't need to flash the entire rom, you can just flash the vendor https://sourceforge.net/projects/nitrogen-project/files/surya/10.0/firmware%2Bvendor/
Click to expand...
Click to collapse
1)Okay how to flash this vendor rom Global_V12.0.3.0.QJGMIXM_e2c7ace186_10.0.zip ?
2)Can it be flashed using twrp? before flashing this LineageOS 18.0?
3)Must i also have bootloader unlocked as i am still waiting for unlock?

jutley said:
Okay how to flash this vendor rom?can it be flashed using twrp?before flashing this LineageOS 18.0? must i also have bootloader unlocked as i am still waiting for unlock?
Click to expand...
Click to collapse
It's flashable via TWRP, also you can't install TWRP with a locked bootloader

Related

[ROM][OFFICIAL][PAYTON][NIGHTLIES]Lineage OS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Introduction:
This is the official Lineage OS thread for the Motorola Moto X4, codename payton.
We support all the T-Mobile, International, and Project Fi variants, as their bootloaders are unlockable, while we can't support the Verizon and AT&T variants, as their bootloaders are permanently locked.
How to install:
Boot the newest TWRP .img from the Official TWRP Project Site.
IF YOU ARE COMING FROM STOCK AND WANT TO INSTALL CUSTOM ROMS FOR FIRST TIME, INSTALL "Copy Partitions Zip" FROM POST #2
In TWRP, click "Wipe", "Format Data", then type "yes" as prompted.
ADB sideload the newest weekly
(Optionally) You can flash the newest TWRP Installer also found at the Official TWRP Project Site if you wish to maintain TWRP, though the pre-installed Lineage Recovery instance will do everything you need it to in most cases. We don't recommend or support the use of the TWRP installer, as it is overwritten on every update (will need to be re-installed every update), and has no addon.d-v2 persistence.
Click "Reboot, then choose "Recovery", this will boot you to either Lineage Recovery or TWRP depending on your choice to install TWRP or not. It is necessary to reboot between ROM flash and GApps/Addon flash due to verity/slot-swap logic.
(Optionally) Flash GApps - MindTheGApps arm64 are recommended, OpenGApps are compatible with A/B as of 09102018, but I still only reccoemend and support MindTheGApps.
(Optionally) Flash SU - you'll need to turn it on from in developer settings after first boot Lineage OS SU Addon. - Magisk works fine, though is not supported.
Reboot
Notes:
Official Lineage OS builds will not pass CTS/SafetyNet -- due to the AVB flag's "red" status. (Magisk works fine, though is not supported.)
Official Lineage OS builds ship with full treble compatibility, with VNDK runtime enforcement! This means that unlike most "ported treble" you'll see, ours is just as it would be from the OEM, and can run any GSI (yes, even Pie!) without need for hacks or additional flashable zips. We relabeled /oem as /vendor (as /oem isn't used in custom ROM's anyway). To use a GSI, flash official Lineage, then flash your GSI, it's that simple! Flashing a factory image will likely write over /oem and remove the mock vendor image. Please don't report GSI bugs here, report them instead to the GSI's maker.
Download:
LineageOS Updater
XDA:DevDB Information
Lineage OS 17.1, ROM for the Moto X4
Contributors
erfanoabdi, Lineage Team
Source Code: https://github.com/LineageOS
ROM OS Version: 10.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Official Pie
Version Information
Status: Stable
Created 2018-09-01
Last Updated 2019-03-02

Copy Partitions Zip
- courtesy @ @filipepferraz
Download
Firmwares
XT1900-1 Android 8.0
firmware_27.251.12_payton_retail_xt1900-1.zip
Only tested on
XT1900-1
XT1900-2
XT1900-5 (https://forum.xda-developers.com/showpost.php?p=76934354&postcount=173)
XT1900-7 (https://forum.xda-developers.com/showpost.php?p=76779696&postcount=14)
feel free to test on other Moto X4 models running 8.0.
XT1900-6 Android 8.0 - courtesy @filipepferraz
https://www.androidfilehost.com/?fid=674106145207492371
XT1900-1 Android 8.1 - courtesy @ptn107
https://www.androidfilehost.com/?fid=890278863836292604
tested on XT1900-7 as well (https://forum.xda-developers.com/showpost.php?p=76816113&postcount=92)

About OTA: see post #778
Back to Stock :

Nice work, guys!

Excellent work! It's impressive that you could get this done when one person didn't have the phone. That's a good ol' fashioned hackathon.

Can somebody confirm if encryption works?

i love you guys <3

igna.98 said:
Can somebody confirm if encryption works?
Click to expand...
Click to collapse
It says "Phone Encrypted" under Settings. So, yes.
---------- Post added at 03:15 AM ---------- Previous post was at 02:53 AM ----------
Also happy to report that Magisk works successfully by sideloading the zip in TWRP (Data will not get decrypted when you boot into TWRP after the first boot - just hit cancel to get to the TWRP main menu > Advanced > ADB Sideload and sideload the Magisk ZIP.) SafetyNet passes too! And Google Pay works (finally!!! ...It was broken for me on stock).

Just got set up:
- AOSP firmware flash working on google fi version running 7.1
- Twrp decrypt not working with pin on the linked twrp or 3.2.1.1. Have to remove pin before booting to recovery
- videos recorded are choppy and lag during playback through camera app. I'll check when I install another gallery app but I rarely record so not a huge issue right now.
- bluetooth working well
Liking Lineage so far, especially the dark theme it seems to default to. I'll update with more as I play around with this. Thanks.

Speaker not working
Edit: seems it's just media, not phone
Just ran into an issue, speaker doesn't work with any app I've tried. There is sound with Bluetooth in the same apps. Attached some logcats.

brandontowey said:
Edit: seems it's just media, not phone
Just ran into an issue, speaker doesn't work with any app I've tried. There is sound with Bluetooth in the same apps. Attached some logcats.
Click to expand...
Click to collapse
Interesting. Working for me - tested using the Amazon Music app.
Edit: YouTube was used to test as well. However, the speaker volume level across all apps is lower than stock.

smmankad said:
Interesting. Working for me - tested using the Amazon Music app.
Huh, just tried and it stutters and no sound in YouTube. What model are you using and did you have Oreo already? I'm on the Google fiber variant and came from 7.1. maybe I need to upgrade to stock Oreo then flash.
Click to expand...
Click to collapse

brandontowey said:
smmankad said:
Interesting. Working for me - tested using the Amazon Music app.
Huh, just tried and it stutters and no sound in YouTube. What model are you using and did you have Oreo already? I'm on the Google fiber variant and came from 7.1. maybe I need to upgrade to stock Oreo then flash.
Click to expand...
Click to collapse
I was on stock Oreo 8.0.0/March 2017 (am having the XT1900-1 RETUS non-Fi version). Maybe that's why.
Click to expand...
Click to collapse

Thank you so much, my Payton is now flying. XT1900-7

igna.98 said:
Thank you so much, my Payton is now flying. XT1900-7
Click to expand...
Click to collapse
which firmware file did you use? xt1900-1 or xt1900-6?

Dumb question, can you flash if you're on 8.1?

munchy_cool said:
which firmware file did you use? xt1900-1 or xt1900-6?
Click to expand...
Click to collapse
XT1900-1

Wow nice job.
Sent from my Moto G5 Plus using XDA Labs

Not using it yet...
But I wanted to thank you guys SO much for working on this. I see using Lineage as the long-term plan for my phone (and my wife's) but these are our daily drivers and can't afford them to be offline for long. Once it is verified solid, I will likely switch. Thank you again!

ebrandsberg said:
But I wanted to thank you guys SO much for working on this. I see using Lineage as the long-term plan for my phone (and my wife's) but these are our daily drivers and can't afford them to be offline for long. Once it is verified solid, I will likely switch. Thank you again!
Click to expand...
Click to collapse
Its pretty damn solid as is. I've been using it since yesterday and no random reboots, no glitches, and super fast. My X4 is my daily driver too, btw.

[LineageOS][ASB 2020-01][UNOFFICIAL][sanders] Moto G5S Plus - 12/02/2020

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Known issues:
Report with logs
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
LineageOS v1: https://androidfilehost.com/?fid=1322778262904010158
LineageOS v2: https://androidfilehost.com/?fid=11410932744536982667
LineageOS v3: https://androidfilehost.com/?fid=11410963190603861872
LineageOS v4: https://androidfilehost.com/?fid=11410963190603870840
LineageOS v5: https://androidfilehost.com/?fid=11410963190603895940
LineageOS v6: https://www.androidfilehost.com/?fid=1395089523397902253
LineageOS v7: https://www.androidfilehost.com/?fid=1395089523397911962
LineageOS v8: https://androidfilehost.com/?fid=1395089523397939521
LineageOS v9: https://www.androidfilehost.com/?fid=1395089523397963819
LineageOS v10: https://github.com/MasterAwesome/an.../lineage-16.0-20190609-UNOFFICIAL-sanders.zip
LineageOS v11: https://github.com/MasterAwesome/an.../lineage-16.0-20190704-UNOFFICIAL-sanders.zip
LineageOS v12: https://github.com/MasterAwesome/an.../lineage-16.0-20190711-UNOFFICIAL-sanders.zip
LineageOS v13: https://github.com/MasterAwesome/an.../lineage-16.0-20190720-UNOFFICIAL-sanders.zip
LineageOS v14: https://github.com/MasterAwesome/an.../lineage-16.0-20190728-UNOFFICIAL-sanders.zip
LineageOS v15: https://github.com/MasterAwesome/an.../lineage-16.0-20191004-UNOFFICIAL-sanders.zip
-------- ROMs from device/kernel/vendor tree from my GitHub will now be maintained by stesie.
https://github.com/stesie/android_device_motorola_sanders/releases
For Oreo bootloader (deprecated): FPb-sign.zip
GApps: https://opengapps.org/#downloadsection
XDA:DevDB Information
LineageOS, ROM for the Moto G5S Plus
Contributors
MasterAwesome, premaca
Source Code: https://github.com/MasterAwesome/android_device_motorola_sanders/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Beta
Created 2018-09-20
Last Updated 2020-02-12

Reserved

Reserved

Trying it out now will edit if un/successful

Treble, vendor?

Halo, i've install the rom this morning,, but i unable to install magisk, i can install it via twrp but its not rooted,, i try reinstall but it same,

William1020000 said:
Trying it out now will edit if un/successful
Click to expand...
Click to collapse
Sounds good, report with logs if bugs
KeveenKD7 said:
Treble, vendor?
Click to expand...
Click to collapse
Just a regular ota zip just flash it like any ROM
oezank said:
Halo, i've install the rom this morning,, but i unable to install magisk, i can install it via twrp but its not rooted,, i try reinstall but it same,
Click to expand...
Click to collapse
I'll tell you about magisk compatibility in a bit I haven't tested that

oezank said:
Halo, i've install the rom this morning,, but i unable to install magisk, i can install it via twrp but its not rooted,, i try reinstall but it same,
Click to expand...
Click to collapse
Use magisk 16.7... flash it in twrp and then update to latest version in magisk manager

Amazing work! Excelent and thanks

Volte Working ? Or need fixes ?

wow. just awesome!
will check the build & give you the logcat (if any)
thanks OP!
--- UPDATE
I've got "Decryption Failure" and the phone reboot back into recovery (TWRP)
My device is XT1805 .

awesome.. thanks a lot.!!..

pandyag said:
awesome.. thanks a lot.!!..
Click to expand...
Click to collapse
is device decryption required?

Volte please

Till now Everything works absolutely fine including volte... Except m not able to install magisk modules. Using v17.1. Device shows rooted. Thank again for your work.

pandyag said:
Till now Everything works absolutely fine including volte... Except m not able to install magisk modules. Using v17.1. Device shows rooted. Thank again for your work.
Click to expand...
Click to collapse
try using another kernel like Extreme plus. it will work
---------- Post added at 06:49 AM ---------- Previous post was at 06:47 AM ----------
So far the bugs i have noticed:
- Magisk module not installing on included kerenel.
- Accent colour is not changing.
- Even if i change accent colour using root settings app crashes.
---------- Post added at 06:50 AM ---------- Previous post was at 06:49 AM ----------
So far the bugs i have noticed:
- Magisk module not installing on included kerenel.
- Accent colour is not changing.
- Even if i change accent colour using root settings app crashes.

Magisk modules not working on stock kernel

Legend is back!

MasterAwesome said:
Sounds good, report with logs if bugs
Just a regular ota zip just flash it like any ROM
I'll tell you about magisk compatibility in a bit I haven't tested that
Click to expand...
Click to collapse
Couldn't get the ROM to work unfortunately. For some reason my phone won't boot any 9.0 ROM. I've got the latest TWRP installed but as soon as it boots a "shutting down" box appears, the phone shuts off and reboots to TWRP. The same occured when I tried GZOSP 9.X so I'm pretty sure it's not the ROM itself. Any ideas? I assume I get logs from TWRP?

William1020000 said:
Couldn't get the ROM to work unfortunately. For some reason my phone won't boot any 9.0 ROM. I've got the latest TWRP installed but as soon as it boots a "shutting down" box appears, the phone shuts off and reboots to TWRP. The same occured when I tried GZOSP 9.X so I'm pretty sure it's not the ROM itself. Any ideas? I assume I get logs from TWRP?
Click to expand...
Click to collapse
I got the same issue when I flashed android pie GZOSP and sacred os 1.5.1.... I managed to backup my personal content such as downloaded rom, photos and music to my computer.. And I do advanced wipe in twrp (data, system, cache, dalvik, internal storage), then after finished all that, turn phone off for few seconds before boot to twrp again, click mount then choose storage to check if your internal memory is corrupted or not.. in my case, I used model XT1805 with 32gb storage, when I check on twrp, I have around 24gb available, means my storage is there.. Then connect your phone to the computer and transfer your downloaded rom, gapps, magisk and optional stuff like flashable moto cam, enable eis or whatever else you want.. Then install it as usual.... For me itself, took 3 times to make it boot fine without auto shut down or any errors

[OFFICIAL][9.0]ProjectTitanium Beta ARM64 A-A/B[GSI][Update 02/07/2019]

A/B one does not boot on Xiaomi Mi 9 (Vendor used: Xiaomi.eu 9.5.30)
all other GSIs do boot with exact same procedure.

Mohammed779 said:
A/B one does not boot on Xiaomi Mi 9 (Vendor used: Xiaomi.eu 9.5.30)
all other GSIs do boot with exact same procedure.
Click to expand...
Click to collapse
Ah, damn. Let me see what I can do. Thanks for the report.
Could you give me any log?

Mohammed779 said:
A/B one does not boot on Xiaomi Mi 9 (Vendor used: Xiaomi.eu 9.5.30)
all other GSIs do boot with exact same procedure.
Click to expand...
Click to collapse
Same issue for same device.....

I will test it on s9+ and let u know if it boots or no

Update coming this night fixing hopefully all boot issues, even though on some devices it boots...
Regards,

ARM 64 A Only build boots fine on ZTE Axon 7. I had a quick browse through Settings, seems very barebones. I don't blame ya, you said yourself it's in beta. I'll keep an eye out for when you've had a chance to update it

Booted on s9+ but the rom is like stock aosp no features or anything, maybe because it is still on beta

Update 02/07/2019!
Good Evening! I'm back as I said, and here is the update for this ROM.
Changelog:
-Boot issues fixed!
-Vendor fixed!
-New stock wallpaper
-Fixed build number bug
-Other miscellaneous fixes
Download:Only A:
PTi-Beta-0.5-GSI-ARM64-A-OFFICIAL
A/B:
PTi-Beta-0.5-GSI-ARM64-AB-OFFICIAL
Best Regards!

A/B Build added to the update reply, now since the builds should work our team is going to start working on actually bringing features to this.
Hopefully sooner than you think.
Regards,

Akhayev said:
Booted on s9+ but the rom is like stock aosp no features or anything, maybe because it is still on beta
Click to expand...
Click to collapse
Would you please tell the Firmware and Vendor you are on . Thank you !

fares70 said:
Would you please tell the Firmware and Vendor you are on . Thank you !
Click to expand...
Click to collapse
Brk3 vendor , and firmware use the one u already using ,

XTutorials said:
A/B Build added to the update reply, now since the builds should work our team is going to start working on actually bringing features to this.
Hopefully sooner than you think.
Regards,
Click to expand...
Click to collapse
Do you mean this ROM is intended to be feature-rich like Havoc, Liquid, PixelDust...?

Boots on Blu Vivo XI.

Hello Goodnight.
I previously installed GSI roms.
but now I try to install with the usual procedure
for my G9600 S9
but I can not get into the system
it always stays in the logo and never passes from there.
I already wait more than 25 minutes and nothing.
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A-only_arm64 Variant)
Unpack it if it wasn't in .IMG format
Wipe DATA, and reboot in TWRP
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Install the kernel for GSI GSI Kernels
In TWRP mount System, then go to ADVANDED, File Manager, and delete this file: system/bin/rw_system.sh
Reboot system
What is wrong?

Technical said:
Do you mean this ROM is intended to be feature-rich like Havoc, Liquid, PixelDust...?
Click to expand...
Click to collapse
Well, we want to make something different from any other ROM, but yes, it will also have plenty of features enough to satisfy everyone, hopefully also reaching my intentions. We intent of bringing 1.0 this fall.
Regards,

hi Guys
I can not install a gapps twrp error 70 otherwise rome runs well and as always with my asus zenfone 5 ze620kl automatic brightness does not work ..
can you please build a rome with gapps.
Thank you

XTutorials said:
Well, we want to make something different from any other ROM
Click to expand...
Click to collapse
What do you mean?
Until May I was able to compile Bootleggers, Havoc and Liquid. Since then, sepolicy and other specific issues are blocking building or booting later. I like featured rich ROMs and I could help to compile Titanium, although my knowledge is not enough to help you, devs.
---------- Post added at 08:19 ---------- Previous post was at 08:14 ----------
barbaross said:
hi Guys
I can not install a gapps twrp error 70
Click to expand...
Click to collapse
In TWRP, just go to Wipe menu > Advanced Wipe > check System partition > Partition options > Resize FS. Then flash Gapps again.

Technical said:
What do you mean?
Until May I was able to compile Bootleggers, Havoc and Liquid. Since then, sepolicy and other specific issues are blocking building or booting later. I like featured rich ROMs and I could help to compile Titanium, although my knowledge is not enough to help you, devs.
Click to expand...
Click to collapse
Well, this ROM can be build as any other ROM, so anyone with some Linux knowledge should be able to build this, as any other ROM.
And soon accepting official maintenance!

mezacorleehone said:
Hello Goodnight.
I previously installed GSI roms.
but now I try to install with the usual procedure
for my G9600 S9
but I can not get into the system
it always stays in the logo and never passes from there.
I already wait more than 25 minutes and nothing.
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A-only_arm64 Variant)
Unpack it if it wasn't in .IMG format
Wipe DATA, and reboot in TWRP
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Install the kernel for GSI GSI Kernels
In TWRP mount System, then go to ADVANDED, File Manager, and delete this file: system/bin/rw_system.sh
Reboot system
What is wrong?
Click to expand...
Click to collapse
First you need BRK3 vendor , and flash aosp kernel not gsi , the best kernel is Endurance-Kernel-AOSP-1.2.30.zip
First, wipe system data cache and then flash vendor then flash the rom then flash kernel the magisk then reboot ot will work fine , no need to delete rw_system or anything

[ROM][9.0][OFFICIAL][PINE][NIGHTLY][SHARE] MoKee Open Source Android Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[SIZE="4"]
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* I am not the maintainer or developer, I found this and wanted to share it on XDA
*/
[/SIZE]
MoKee Open Source is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the user habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives. Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee Open Source. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop.
I AM NOT THE DEVELOPER OF THIS ROM AND I ONLY MAKE THIS THREAD FOR XDA COMMUNITY. IN ANY CASE, MOKEE AND GuaiYiHu HAS ALL THE RIGHTS OVER THIS ROM.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
VoLTE
ViLTE
Known issues:
You tell me
Instructions :
Download this TWRP Recovery and install it.
Download the ROM (MK90.0-pine-xxxxxxxxxx-NIGHTLY.zip)
Go into TWRP Recovery — Wipe — Advanced Wipe — Select: Dalvik、Data、Cache、System — Swipe to Wipe
Install the ROM (MK90.0-pine-xxxxxxxxxx-NIGHTLY.zip)
If you have problems during the flash, you have to unpack the archive and delete the "compatibility" file. Once that is done, put all the files together in a new archive. ZIP, and you will have no problems during flash.
Downloads:
[*]MoKee Download for PINEhttps://download.mokeedev.com/pine.html
MoKee Add-Ons:
[*]MoKee Extras
MoKee Help & Support links:
[*]MoKee Announcements
[*]MoKee Changelogs
[*]MoKee Forums
[*]MoKee Guides
[*]MoKee Statistics
[*]MoKee Gerrit
[*]MoKee Bug Reports
Sources: https://github.com/GuaiYiHu/android_kernel_xiaomi_sdm439
Credits:
GuaiYiHu
Mokee Development Team
LineageOS
If you like it, don´t forget to say thanks!
XDA:DevDB Information
Mokee Open Source Project, ROM for the Redmi 7A, ROM for the Redmi 7A
Contributors
GuaiYiHu
ROM OS Version: 9.x Pie
Based On: Mokee Open Source Project
Version Information
Status: Nightly
Current Beta Version: 2019-10-27
Beta Release Date: 2019-10-24
Created 2019-10-28
Last Updated 2019-10-28

Release types:
RELEASE: Tested after integrating new features, more stable than NIGHTLY. (Odexed builds)
NIGHTLY: Built daily with newest code and experimental features, might contain undiscovered bugs. (Deodexded builds)
HISTORY: Final odexded builds once a newer Android version is out and being built.
EXPERIMENTAL: Released when a new device is added or when a new feature is added for public beta testing and feedback. (Deodexded builds)
UNOFFICIAL: Maintained separately by individual developers, usually involves modification of shared code which cannot be merged (affects other devices), therefore maintained by the developer himself.

This is nice, but I think the flashing method is "copy pasted" from original site, and therefore will not work on this device. But i am not sure.
what i meant that wont work is that this device's normal flashing method requires a lot of reboot to recovery, while the OP's instructions is for A devices only.

regularfanb0y said:
This is nice, but I think the flashing method is "copy pasted" from original site, and therefore will not work on this device. But i am not sure.
what i meant that wont work is that this device's normal flashing method requires a lot of reboot to recovery, while the OP's instructions is for A devices only.
Click to expand...
Click to collapse
Actually 7A is A-only device, working as system-as-root.
The OP's instructions are right, cuz I installed it this way and everything works fine.

Thank you this is a good step forward. I'm going to try this rom later this evening.

Wipe data of format data?
Coming from stock MIUI 11 Android 9 do I have to format the data partition or to wipe it? Usually MIUI to AOSP needs a format.

Luelu said:
Actually 7A is A-only device, working as system-as-root.
The OP's instructions are right, cuz I installed it this way and everything works fine.
Click to expand...
Click to collapse
Alright my bad, but flashing a gsi rom, we need to restart a lot(wipe, reboot to recovery, flash gsi, reboot to recovery, flash zips, reboot to system)
While this rom is installed in a traditional way (wipe and flash just like the old days) if someone can explain why itll be really appreciated.
I am really new to GSI and this phone but i am willing to help testing stuffs for development for this device! only if TWRP restore function works

Davv said:
Coming from stock MIUI 11 Android 9 do I have to format the data partition or to wipe it? Usually MIUI to AOSP needs a format.
Click to expand...
Click to collapse
Nop, just wipe.

Luelu said:
Nop, just wipe.
Click to expand...
Click to collapse
Thank you so much
---------- Post added at 09:31 PM ---------- Previous post was at 09:00 PM ----------
cant download twrp, I cant create a QQ Account, evrytime i try to verificate my phone number it asks to send an sms to a chinese number but that doesnt work. can someone reupload it on some other cloud service?

I appreciate your work, but TWRP is impossible to download, not with all these chinese characters. I see a QR code but I want to download to my PC first.
Even google was unable translate it

Jazzda said:
I appreciate your work, but TWRP is impossible to download, not with all these chinese characters. I see a QR code but I want to download to my PC first.
Even google was unable translate it
Click to expand...
Click to collapse
I used twrp LR team from gsi post and worked with this recovery.if you need root download su add .magisk don't work...

Newest Magisk seems to be working through recovery at least work for me for installing NanoDroid.
There seems to be problem with setting up mobile hotspot. Mobile hotspot cant be seen or accessed with SSID either.
ROM also lacks possibility to have navigation bar binded.

Is it possible to use the SD Card as internal storage with this rom? It's more or less the single reason I'd flash a different rom for.

the batery life it is much smaller than miui's

I flash the rom following the instructions, but my cel doesn't boot, only reboot and boot to twrp, i'm only flashing the system without su, magisk or gapps, but it's the same, what can be wrong?

Ranfiel said:
I flash the rom following the instructions, but my cel doesn't boot, only reboot and boot to twrp, i'm only flashing the system without su, magisk or gapps, but it's the same, what can be wrong?
Click to expand...
Click to collapse
flash stock rom and flash again the rom

ElFanta said:
flash stock rom and flash again the rom
Click to expand...
Click to collapse
The same, doesn't boot, it's curious because the GSI roms doesn't work for me too, i don't know why. I'm coming from MIUI 11, but i rollback to 10.2.5 so shouldn't have problem with this, but i have.
I rollback with MiFlash Tool with fastboot rom global
EDIT: I get the GSI Rom working, just format DATA and type YES on TWRP
EDIT2: After make the DATA reset with TWRP i was able to boot with the MoKee Rom :3

mais 14 said:
I used twrp LR team from gsi post and worked with this recovery.if you need root download su add .magisk don't work...
Click to expand...
Click to collapse
Maybe try using patched boot img from gsi thread.

Ranfiel said:
I flash the rom following the instructions, but my cel doesn't boot, only reboot and boot to twrp, i'm only flashing the system without su, magisk or gapps, but it's the same, what can be wrong?
Click to expand...
Click to collapse
Try format data for twrp and reboot.

Ranfiel said:
The same, doesn't boot, it's curious because the GSI roms doesn't work for me too, i don't know why. I'm coming from MIUI 11, but i rollback to 10.2.5 so shouldn't have problem with this, but i have.
I rollback with MiFlash Tool with fastboot rom global
EDIT: I get the GSI Rom working, just format DATA and type YES on TWRP
EDIT2: After make the DATA reset with TWRP i was able to boot with the MoKee Rom :3
Click to expand...
Click to collapse
The batery life is good in your rom? In my phone is a sh*t

[UNOFFICIAL][ROM][T585] LineageOS 18.x [11.0][64 BIT][Treble]

LineageOS 18.x Unofficial for Galaxy Tab A6 2016
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Quack), which is designed to increase performance and reliability over stock Android for your device.
/*
* Your warranty is now void. Or not. Depends.
* It's probably expired anyways
*
* I am not responsible for bricked devices, dead SD cards.
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
What's working?
Audio
Calls
Wifi
Hotspot
Mobile data
GPS
Bluetooth
Camera (both photos and video)
Sensors
Vibration
Others I have forgot
What isn't working?
You tell me .
How to install
Make sure you have latest bootloader and modem before installing this.
Make sure you are using the latest Twrp build. (the older ones will fail)
Make sure you have flashed the repartition script.
Download the Lineage build, optionally GApps and Magisk.
In Twrp format data. (Menu > Manage Partitions > Data > Format Data)
In Twrp wipe everything except SD and OTG.
Flash LineageOS.
Optional: Flash GApps (rightafter).
Optional: Flash Magisk.
Reboot.
Generally it's ok to dirty flash, but if you encounter issues a clean flash should be the first thing on your mind.
Downloads
• ROM
MediaFire
• Recovery
Twrp
• Support
Telegram group
• GApps
OpenGApps (arm64): OpenGApps
BiTGApps (arm64): AFH
• Root
Magisk: GitHub
Credits
Huge thanks to:
@Astrako for all the hours spent on the device tree/kernel/vendor/hardware and making this possible.
LineageOS Team
Anybody that reported bugs or helped test various stuff, without every one of you Android 10 would never get so stable here
XDAevDB Information
[UNOFFICIAL][ROM][T585] LineageOS 18.x [18.0][64 BIT][Treble], ROM for the Samsung Galaxy Tab A Series
Contributors
ROM OS Version: Android 11
ROM Kernel: Stock M10 Kernel
ROM Firmware Required: Latest modem + BL recommended
Version Information
Status: Stable
Created: 2022-10-27
Last Updated: 2022-10-27

I keep seeing this "Make sure you have flashed the repartition script." mentioned - what exactly IS that script and why do we need it? I know I didn't need to flash that when flashing a custom A10 rom a year or 2 ago

Kostareka said:
LineageOS 18.x Unofficial for Galaxy Tab A6 2016View attachment 5744907
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Quack), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
What's working?
Audio
Calls
Wifi
Hotspot
Mobile data
GPS
Bluetooth
Camera (both photos and video)
Sensors
Vibration
Others I have forgot
What isn't working?
You tell me .
How to install
Make sure you have latest bootloader and modem before installing this.
Make sure you are using the latest Twrp build. (the older ones will fail)
Make sure you have flashed the repartition script.
Download the Lineage build, optionally GApps and Magisk.
In Twrp format data. (Menu > Manage Partitions > Data > Format Data)
In Twrp wipe everything except SD and OTG.
Flash LineageOS.
Optional: Flash GApps (rightafter).
Optional: Flash Magisk.
Reboot.
Generally it's ok to dirty flash, but if you encounter issues a clean flash should be the first thing on your mind.
Downloads
• ROM
MediaFire
• Recovery
Twrp
• GApps
OpenGApps (arm64): OpenGApps
BiTGApps (arm64): AFH
• Root
Magisk: GitHub
Credits
Huge thanks to:
@Astrako for all the hours spent on the device tree/kernel/vendor/hardware and making this possible.
LineageOS Team
Anybody that reported bugs or helped test various stuff, without every one of you Android 10 would never get so stable here
XDAevDB Information
[UNOFFICIAL][ROM][T585] LineageOS 18.x [18.0][64 BIT][Treble], ROM for the Samsung Galaxy Tab A Series
Contributors
ROM OS Version: Android 11
ROM Kernel: Stock M10 Kernel
ROM Firmware Required: Latest modem + BL recommended
Version Information
Status: Stable
Created: 2022-10-27
Last Updated: 2022-10-27
Click to expand...
Click to collapse
screen cast not working on samsung note 3

Nimueh said:
I keep seeing this "Make sure you have flashed the repartition script." mentioned - what exactly IS that script and why do we need it? I know I didn't need to flash that when flashing a custom A10 rom a year or 2 ago
Click to expand...
Click to collapse
Because t585 does not contain a vendor partition, so this script repartitions the device and makes a partition for the vendor .

Kostareka said:
Because t585 does not contain a vendor partition, so this script repartitions the device and makes a partition for the vendor .
Click to expand...
Click to collapse
I didn't need that on A10, why do I need it now? Or is that because it's a GSI?
I wish flashing roms didn't get more + more complicated every year

Nimueh said:
I didn't need that on A10, why do I need it now? Or is that because it's a GSI?
I wish flashing roms didn't get more + more complicated every year
Click to expand...
Click to collapse
Yes, you need it because the ROM has become GSI, you can try Android 12 using lineage 18 vendor .

Kostareka said:
Yes, you need it because the ROM has become GSI, you can try Android 12 using lineage 18 vendor .
Click to expand...
Click to collapse
OK, thanks for the explanations ... I think I'll stay on my old A10 rom instead. I don't want to mess with partitions and stuff.
Thanks for all your work though

Thanks for the support for T585. Hope you continue supporting it.

Can you flash "any" Android 12 GSI after flashing it or only Android 11 GSI works?
And can you flash it on T580?

ar0177417 said:
Can you flash "any" Android 12 GSI after flashing it or only Android 11 GSI works?
And can you flash it on T580?
Click to expand...
Click to collapse
Yes you can boot android 12 gsi

Kostareka said:
Yes you can boot android 12 gsi
Click to expand...
Click to collapse
Can you make this for T580. Tried this partiton script but got /vendor (invalid argument) error

Hi
I have SM T585 U7
And I flashed (lineage16) on it, then I used ( repartition script) and flashed recovery (3.7.0.gtaxllt) and (lineage 18.1) and I did not like it very much, so I deleted it and also deleted (vendor) and flashed (lineage 16) again and restarted it, and it remained standing on the recovery logo and it did not It works until I flashed (cf root t585) via (odin), so it booted, but whenever I re-install any TWRP, it just stays on the logo and does not boot.
I got bored and wanted to restore the original system and downloaded it and put it in the (odin) and the flashing was successful, but the device continues to restart to no avail
I flashed TWRP again and found system (0
system img (3180
I do not know where the problem is, although the ROM is the original ROM, and the flashing is done successfully in Odin, but without a system
And it continues to restart. The Odin files that I used are the official AP.CP.HOMECSC .CSC.BL
I just want to return the original rom
Do you have a solution.
Thanks

I really need some help
I just installed this ROM successfully yesterday and it was working just fine on my sm-t585
But...
For some reason today it decided to brick my touch
Only the hardware buttons are functional and it's 50% charged so it's gonna take a lot of time for me to try to shut it down
So does anyone have any clue why that happened and how to fix it
(Note: the 2 touch buttons next to the home button are touch as well and they are also bricked)
Edit: I remembered that I installed the repartition script twice and now I have 2 vendors can I get rid of one ?! And how
Edit² : I did some troubleshooting and I found out what caused the touch problem...... It was the darn battery saving mode but now am wondering if anybody encountered the same problem

Better Mobile App

welcome