hi everyon
Perform BLU unlock in Device connected in fastboot mode
The following error message appears
ERROR-Cannot invoke "String.split(String)" because the return value of "java.util.Properties.getProperty(String)" is null
How to solve this?
Mobile: xperia xz1 (SOV36) Japanese version Android9.0
Please see the link below
[IMG="https://i.imgur.com/bIuj3Gj.jpg"]
Thank you
use " command prompt " to unlock your bootloader
TEK023 said:
use " command prompt " to unlock your bootloader
Click to expand...
Click to collapse
Please help. I'm always fail when I try to unlock bl
Hi I have the sam problem
ERROR-Cannot invoke "String.split(String)" because the return value of "java.util.Properties.getProperty(String)" is null
unlocked was by fastboot lock is not possible by fastboot
Same problem here
Tried command prompt
Tried a different PC
8 hours of trying later and I'm ready to smash the phone to pieces with a hammer
Same problem here. What firmware and fastboot version are you on?
Mine is 53.1.A.3.85 and 30.0.5
@TEK023 Tried both Flashtool and fastboot, without success.
Fastboot fails with errormessage:
Bash:
sudo fastboot oem unlock 0x463xxxxx
FAILED (remote: 'Command did not succeed')
fastboot: error: Command failed
Same problem here!
is the developer options
under oem unlocking bootloader enabled?
not all phones allow oem unlocking bootloader. only some phones allow it.
you can't do nothing about it. no hack. from I know.
some carrier phones don't even allow usb debugging and no developer options .
same problem with xz2 compact.
Although
bootloader unlock allowed: yes
Oem unlock: On
Fixed by turning off lock the bootloader in dev options. Stupid Me!
Guys, I have a problem with my Sony Xperia XA2 Ultra H4213 that dropped software, so when I make a flash tool for new software can not respond to do that, also because of unlocking bootloader is not activated, I used all things also command prompt. I also try to unlock the bootloader to make new software can't respond also, can you help me, guys? please how to fix that thing?
jossefzizo said:
Pessoal, estou com um problema com meu Sony Xperia XA2 Ultra H4213 que derrubou software, então quando faço uma ferramenta flash para software novo não consigo responder a fazer isso, também porque o desbloqueio do bootloader não está ativado, usei todas as coisas também prompt de comando . Também tento desbloquear o bootloader para fazer com que novos softwares não respondam também, podem me ajudar, pessoal? por favor, como consertar isso?
Click to expand...
Click to collapse
managet tu unlock?
Related
Hello,
I'm new to this board as a registered user but I use for over 2 years. So thanks guys, for creating such an awesome knowledge base.
I have a problem. I have a device (the Ampe A76 Tablet). Recenty it got locked because of too many wrong pattern entries and now it only wants my Google account credentials. I can give them. But the problem is the WiFi isn't connected or turned on so, even though I enter my account information correctly, the device cannot check for it's validity. So, the device stays locked.
I searched for it firmware and found some [ hxxp:// www . szampe . com / support_down.asp ? id=800\ ] but the server is extremely slow. I cannot download it for days.
In this situation, I think it will be really useful to have a method to bypass the pattern entry screen using some kind of key combination to enter the factory reset interface.
Thanks anyway
NIce forum,
unrealistgeek said:
Hello,
I'm new to this board as a registered user but I use for over 2 years. So thanks guys, for creating such an awesome knowledge base.
I have a problem. I have a device (the Ampe A76 Tablet). Recenty it got locked because of too many wrong pattern entries and now it only wants my Google account credentials. I can give them. But the problem is the WiFi isn't connected or turned on so, even though I enter my account information correctly, the device cannot check for it's validity. So, the device stays locked.
I searched for it firmware and found some [ hxxp:// www . szampe . com / support_down.asp ? id=800\ ] but the server is extremely slow. I cannot download it for days.
In this situation, I think it will be really useful to have a method to bypass the pattern entry screen using some kind of key combination to enter the factory reset interface.
Thanks anyway
NIce forum,
Click to expand...
Click to collapse
I have the same case...........
I FOUND a solution, by installing the official firmware from the company official site.
Sent from my GT-P6200 using xda app-developers app
I know this is a solution
Oracle1977 said:
I FOUND a solution, by installing the official firmware from the company official site.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
I know this is a solution but the problem is, as I might have already mentioned, that I couldn't download the firmware and the necessary app for the Flashing process to be completed. The server response is EXTREMELY slow in here.
If you have the drivers, app and the firmware, could you please kindly make it available in someplace else? Such as, Mediafire etc??
unrealistgeek said:
I know this is a solution but the problem is, as I might have already mentioned, that I couldn't download the firmware and the necessary app for the Flashing process to be completed. The server response is EXTREMELY slow in here.
If you have the drivers, app and the firmware, could you please kindly make it available in someplace else? Such as, Mediafire etc??
Click to expand...
Click to collapse
sorry I just saw yr post the site is slow but not all days Itried for 4 days until the downlaod was reasnable to get. you may need to try some more. if you did not succesed tell me.
Is there any link to official or custom firmware? , My current firmware is bloated and causing malfunction.
Consegui solucionar o meu problema.
O meu estava estático, ligava a luz, mas não aparecia nada na tela.
Consegui consertar.
Como percebi que as informações na net são meio complicadas de encontrar, vou deixar aqui o passo a passo do que eu fiz.
1 - Baixar o programa Live Suit
2 - Instalar o programa
3 - Baixar o Firmware - (não conseguir postar o link, me peçam por email: [email protected])
4 - Após a conclusão de download, abra o programa live suit.
5 - Aperte "Yes", depois "Yes" novamente, "general" , e selecione onde está o arquivo baixado.
6 - Conecte o tablet no pc, pressione o botao + e o botão power juntos por alguns segundos, até o pc detectar.
7 - Ele vai perguntar se você quer formatar realmente, responda "yes", depois "yes" novamente.
8 - Aguarde o termino do procedimento e pronto !!!
Hello! I have a Moto E and I saw this tutorial, when I try to unlock the bootloader, I encounter the following message:
"Your device is not qualified to bootloader"
But, if have root to Moto E, and Bootloader, how my device is not qualified to make the bootloader?
PS: Sorry for the bad english, i'm brazilian :silly:
tailsdoll said:
Hello! I have a Moto E and I saw this tutorial, when I try to unlock the bootloader, I encounter the following message:
"Your device is not qualified to bootloader"
But, if have root to Moto E, and Bootloader, how my device is not qualified to make the bootloader?
PS: Sorry for the bad english, i'm brazilian :silly:
Click to expand...
Click to collapse
Português: Você postou na seção fórum errado. Você precisa colocar um comentário neste fórum: http://forum.xda-developers.com/general/rooting-roms
Este fórum é para os relógios inteligentes do Google.
Boa sorte!
English: You posted in the wrong forum section. You need to post in this forum : http://forum.xda-developers.com/general/rooting-roms
This forum is for the Google smart watches.
Good luck!
So recently I have been trying to root my At&t LG Phoenix 4, when I use the command "adb reboot bootloader", it just performs a normal reboot into Android. I have USB debugging enabled and I have the setting "Enable OEM unlock" enabled. My end goal is to eventually install TWRP recovery for this device and then flash Magisk. I managed to boot into it once while following this tutorial, but never ended up being able to get into it again after that. One other notable thing is that when I boot into recovery via "adb reboot recovery", the screen displays "no command" with the droid on its back. Is there any way I can reboot into Fastboot so that I can install TWRP?
Device Info:
Stock Rom
Developer Options: Enabled
Android Version: 8.1.0
Rooted: False
On the no command screen you have to press the power button to enter in recovery. You are seening no command means you are there in recovery but to come to main screen you have to do one extra step. From there you can enter to bootloader/fastboot mode.
Hit thanks if helped.:laugh:
abhinavp649 said:
On the no command screen you have to press the power button to enter in recovery. You are seening no command means you are there in recovery but to come to main screen you have to do one extra step. From there you can enter to bootloader/fastboot mode.
Hit thanks if helped.:laugh:
Click to expand...
Click to collapse
Just tried this and it did not seem to do anything. Am I missing something?
If power button is not working try the buttons you pressed to enter in the recovery (power + vol down). On no command screen press and hold the buttons for a second or 2 and release. Possibly then you'll then enter in the main screen.
If also this combination dont work try all the buttons in combination.
room LG LM X210APM
Soy nuevo por aquí, quise rootear este dispositivo y termine matándolo por instalarle otra rom diferente a este modelo, lo cual hizo que ya no prendiera ni cargara ni nada de nada : o,
agradecería si alguien tiene una room LG LM X210APM y algún método para revivir el teléfono, pronto hare mis aportes para ser parte de esta gran familia, yo también vivo de esto, solo que estoy en pañales, es decir voy empezando pero la necesidad de aprender y salir adelante me llevo hasta aqui, gracias y tengan un excelente día.
att
Abhinavp649 has it correct just not explained quite clearly.
No offerce infended abhinavp649.
When the "No Command" appears on your screen press and hold the power button FIRST then while keeping tbe power button pressed then press the volume up button.
That will instantly give you the menu.
Pikeypete.
Pikeypete said:
Abhinavp649 has it correct just not explained quite clearly.
No offerce infended abhinavp649.
When the "No Command" appears on your screen press and hold the power button FIRST then while keeping tbe power button pressed then press the volume up button.
That will instantly give you the menu.
Pikeypete.
Click to expand...
Click to collapse
Android 8 relocks the bootloader and disables fastboot. Try LG Uppercut to downgrade and try again. Hope this helps.
JHell said:
Android 8 relocks the bootloader and disables fastboot. Try LG Uppercut to downgrade and try again. Hope this helps.
Click to expand...
Click to collapse
What kdz do we use to downgrade aristo 2 says spc code don't match
Hello, dear friends. will you be able to install firmware with Redmi 4A on this device? the processor is the same, the RAM is the same. what could go wrong? who is very well versed in this matter?
I guess the root was never sucessful. I was never able to root my old one after trying just about everything. Seems I saw one time on here that if your phone is branded by a carrier (locked to a certain network) that you can never root those phones, have to get an unlocked phone. Though it seems logical to also see if there are any custom ROMS even made for that model if you are planning on installing one. Am I correct on these?
Hello, any tutorial on how to root Samsung Galaxy A02 SM-A022M?
did you achieve some bro?
I tried with adb and fastboot with the oem unlock command to be able to flash, but it does not work. By the way I did not find TWRP support for this model, another recovery is needed to be able to install. I wanted to try eftsu, but I can't modify the bootloader. Apparently root can't be done. Help
mezca said:
did you achieve some bro?
I tried with adb and fastboot with the oem unlock command to be able to flash, but it does not work. By the way I did not find TWRP support for this model, another recovery is needed to be able to install. I wanted to try eftsu, but I can't modify the bootloader. Apparently root can't be done. Help
Click to expand...
Click to collapse
Samsung models doesn't had Fastboot mode but you can check the OEM Unlock in developer options (I tink is available on my A022M with android R)
At this moment due to the chipset (MT6739W) we can't see twrp for now (I had another model with same chipset and those model doesn't had twrp it's a moto e 6 play)
And a permanently root for now is not possible but temporary root can work I tink Temp root for MTK ArmV8
MauriJ2001 said:
Samsung models doesn't had Fastboot mode but you can check the OEM Unlock in developer options (I tink is available on my A022M with android R)
At this moment due to the chipset (MT6739W) we can't see twrp for now (I had another model with same chipset and those model doesn't had twrp it's a moto e 6 play)
And a permanently root for now is not possible but temporary root can work I tink Temp root for MTK ArmV8
Click to expand...
Click to collapse
mtk-su will not work, the phone is too new
your best bet will be this tool but it hasnt really been tested against samsungs https://github.com/bkerler/mtkclient
Plis saya mohon untuk bisa membuka root
Translated by GT: Pls I beg to be able to open root
Olá, tenho um SM-022M, fiz o root usando o magisk+Odin, não usei o TWRP. Caso ainda não tenhe encontrado solução posso postar o tutorial que segui.
(Hi, I have an SM-022M, I rooted it using magisk+Odin, I didn't use TWRP. If you still haven't found a solution, I can post the tutorial I followed.)
xphuser said:
Olá, tenho um SM-022M, fiz o root usando o magisk+Odin, não usei o TWRP. Caso ainda não tenhe encontrado solução posso postar o tutorial que segui.
(Hi, I have an SM-022M, I rooted it using magisk+Odin, I didn't use TWRP. If you still haven't found a solution, I can post the tutorial I followed.)
Click to expand...
Click to collapse
Eu gostaria demais de saber como você fez! rs
Translated by GT: I would love to know how you did it! LOL
Se após gravar o novo boot.img o sistemas estiver entrando em bloqueio, é provável que o boot loader esteja bloqueado.
Certifique-se que bootloader estaja unlock.
Translated by GT:
If after writing the new boot.img the system is going into lock, it is likely that the boot loader is locked.
Make sure bootloader is unlocked.
Greetings to all. Just a friendly reminder about XDA Rule #4:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you: Badger50 FSM
Hello friend,has your problem been resolved?
I tried everything to Root SM-A022F/DS
im using mac pro, so the Odin options wont work , using CLI via ADB doesn't work
Also what is the custom ROM/firmware for this device SM-A022F/DS over android 11 ?
eu pisquei um arquivo img de um gsi na partição do super sistema, agora ele não liga. eu tentei piscar via qfil e smsdownload e até twrp , ele muda a rom mas o telefone ainda está preso no modo fastboot. Ele não entra no modo fastbootd ou modo de recuperação. para algo que eu possa fazer? há esperança?
adb reboot fastboot
leobraz said:
i flashesed an img file from a gsi in the super system partition ,now it doesn`t turn on . i`vetried flashing via qfil and smsdownload and even twrp , it changes the rom but the phone is still stuck in fastboot mode. It doesn`t go into fastbootd mode or recovery mode. to something i can do ? is there hope?
Click to expand...
Click to collapse
from original rom with the same version which is installed you can
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot reboot fastboot
fastboot flash system system.img
* i guess you used only 2 img files, right?
when i give the fastboot reboot fastboot command it doesn`t go into fastbootd mode . as if fastbootd mode is corrupted
appears in cmd (error:it will read to boot into userspace fastboot ; one or more components mighit be unbootble
i guess you used only 2 img files, right?it was just one .
i`ve been trying to solve it for two months , i`ve tried all the methods i knew , now i`m out of ideas so i`m asking on the forum
Hi. Bootloader is unlocked and you can access fastboot mode? That's great news!
You can download a stable official firmware from realme website (preferably the same version that's currently installed on your device) and then flash the complete firmware to your device. If you don't want to lose your data then don't flash the userdata partition!
Good luck!