I´m having this weird problem that whenever i edit the build.prop after 2 reboots the changes are gone..
first noticed this when changing the dpi from 560 to 460 with le dpi changer. After first reboot this worked fine but i wanted to try out a different setting ( 500 ) so i repeated the same steps, reboot, but no changes.. i then tried different dpi changing apps but no succes. After that i used a build.prop editor to change the line manually, i noticed that the value did change to 500 but visually there were no changes from the 460 setting.. i was on madsurfers rom 5.9 19s i believe, rooted, all the permissions granted etc.
Now i´m at revolution eui 5.9 21s rom, same steps, dpi hasn´t changed at all from the default 560 even though the build.prop says its 460. i did however notice the following line: " persist.sys.sf.lcd_density=560" Could this override the ro.sf.lcd_density line perhaps?
about an hour ago i tried enabling the camera2api, so followed all the steps and added "persist.camera.HAL3.enabled=1" to the build.prop, rebooted, opened footej camera and noticed i was able to take raw pictures and change shutter time etc :good:
next i installed camera fv 5 and noticed the enable dng raw capture setting was greyed out, i don´t know if i rebooted between but opened footej camera again and wasnt able to take raw pictures there too.. weird huh?
the changes in the build.prop file are still there so one would expect that it should work.. ideas anyone?
thanks, and sorry for the bad english, not my native tongue
As for the dpi setting, i´ve edited the "persist.sys.sf.lcd_density=560" line and now i can see changes in the dpi :good:
next deleted the line for the camera2api. uninstalled camera fv 5 and footej camera. rebooted. added the camera2api line to the build.prop again. rebooted, installed footej camera, freeDcam and camera fv 5. in footej and freeDcam the api2 works but in camera fv 5 the option is still greyed out.
I can live with this
I have a Kate. I enabled the camera2 api in the build.prop. I'm using the latest stable MIUI.
However if I install the ported google camera app, it doesn't work. I found some versions which install and open without problems, but the "viewfinder" is just black, doesn't show anything. The UI is there (all the settings, the preview of the previous photo next to the shutter button etc) but can't see anything with the camera and can't take photos.
Any idea what's causing this? It does this on all version which install and open without a crash (although several ones do not install or crash at starting the app). I allowed all the permissions it requires at the first open, double checked its permissions aferwards in the Settings->Installed apps->Camera(the modded one)->Permissions and it has access to the camera. I removed MIUI battery restrictions from the app.
Anyone could help please?
lolflayz said:
I have a Kate. I enabled the camera2 api in the build.prop. I'm using the latest stable MIUI.
However if I install the ported google camera app, it doesn't work. I found some versions which install and open without problems, but the "viewfinder" is just black, doesn't show anything. The UI is there (all the settings, the preview of the previous photo next to the shutter button etc) but can't see anything with the camera and can't take photos.
Any idea what's causing this? It does this on all version which install and open without a crash (although several ones do not install or crash at starting the app). I allowed all the permissions it requires at the first open, double checked its permissions aferwards in the Settings->Installed apps->Camera(the modded one)->Permissions and it has access to the camera. I removed MIUI battery restrictions from the app.
Anyone could help please?
Click to expand...
Click to collapse
you have to be on Android 7.1 for it to work.
Video recording not working ....recorded video doesn't save
Test this. work for me.
Rom v.7.10.19 beta
PS work only hdr+ don't have 60 fps video.
https://mega.nz/#!4FJRhbzJ!7nGU-ztRWsyD87H7eiVD_TkqtxDd6wt4eKrYjmuxXVY
i have tried some different versions with camera2api enabled but didn't work.
is there any version that will work on this phone ?
I have the same question, I tried many but because our camera hardware is classed as legacy it keeps force closing.
Currently if you have GC 2.7 it's gonna work but no special feature at all, except the lens blue and if you have the virtual gyroscope you'll have the photo sphere option
This version is working,but without hdr+,on snap 615 hdr+ is not supported
https://drive.google.com/open?id=1jGYpCPSMlA2m0fwabJUlZwb9yui_ULN7
Hello guys, as someone who loves the stock Miui camera in the past few days, I've been start porting project with camera from the MiA2 device to our Platina Xiaomi Mi8 Lite and this is my first stable relase of port, test and report bugs down in comments if you find any, suggestions for improving are always welcome
FEATURES:
----------------------------------------------------------------------------------------
Working on back camera:
-Both cameras are utilised IMX363 and (Samsung S5K5E8 Sensors for bokeh depth)
-Video recording:720,1080,4K
-Eis stabilisation
-Portrait with improved depth in photos
-Square photos
-Panorama
-Short video
-Filters
-Manual modes:WB, Focus, Iso, Focus Peaking
-Timer
-Group Selfies
-Tilt-shift
-Straighten
-Slow motion 120fps
-ISO9600
-Burst shooting 100 photos in 5s in 12MP
-Auto HDR and Pro HDR
-HHT night mode for low light
-AI Mode
-Scenes
Working on front camera:
-Normal photo
-Portrait photo
-Video recording
-Short video
-Square with HDR
-Filters
-Timer
-Screen as led flash
-Face tracking for better exposition
-Auto HDR Level 3
-Auto low light enhance
Working in settings:
-Save location info
-Camera sounds
-Save previous mode
-Mirror on front selfie
-Add time stamp on photos
-Dual camera watermark
-Show gridlines
-Focus & shot
-Save original photos as well
-Camera frame 4:3 and 16:9
-Picture quality low:med:high
-Volume buttons function
-Anti banding
-Auto exposure settings
-Contrast
-Saturation
-Sharpness
-Restore default settings
-Press & hold buttons function
-pocket mode
----------Changelog-----------
6:11:2019
-----------------------------------
-Fixed HDR
-Fixed noise in pictures
-Added HHT night mode
-Various fixes for stability
6:12:2019
-----------------------------------
-Fixed AI Modes
-Fixed Beauty mode
-Added make up and remodeling under beauty modes for portrait and square mode
7:14:2019
-----------------------------------
-Fixed front screen led again
-Added scenes menu to photo
-Merged with new libs
-------------------------bugs-----------------------------
-Beauty mode overexpose photos
-Eis don't work on some roms, don't blame me, not my fault..
Installation:
Flash module with magisk, and copy provided lib in vendor/lib if you want front camera to work, however this port is compatible with Camera2api HAL3
Downloads:
Initial release: https://drive.google.com/open?id=1MREkVcM3zz329ks85rV5mvjzlfj-fLPA
6:11:2019 https://drive.google.com/open?id=1m1QXK5Lz2_DtjkuTw8QFR435E1BgE-cq
6:12:2019 https://drive.google.com/open?id=1f6GEkIa7K5KxRFLjnNBXqH9-cFEAMZ51
7:14:2019 https://drive.google.com/open?id=1HaDKAEhtKUjgFWRp9mLm9KputkJVFyWi
Front camera fix, flash via TWRP Only PixelExpirience rom. Flashable zip include sunny lib from vendor and buildprop with disabled camera2 HAL3
Thanks, I'll try
Bootloop after install
On xiaomi eu 23.05
blackbuga said:
Bootloop after install
On xiaomi eu 23.05
Click to expand...
Click to collapse
Install on Pixel Expirience or Mokee, this is port for aosp roms
I have been testing it (with default settings, HAL3 enabled and gcam front camera fix) and I found some bugs.
Sometimes, the shutter does not respond correctly and when I move the camera I can appreciate some lens distortion. I also noticed that the pictures taken with the rear camera are saved with a lot of background noise. It is normal?
If I disable HAL3 (into /vendor/build.prop), replace libmmcamera_platina_imx576_sunny.so (into /vendor/ lib/ ) and restart the device to be able to use the front camera, it takes photos but camera interface freezes instantly.
I am using Pixel Experience Pie (aosp version 2019 05 08) with Acrux Kernel 1.0.1 Stable
GuGor said:
I have been testing it (with default settings, HAL3 enabled and gcam front camera fix) and I found some bugs.
Sometimes, the shutter does not respond correctly and when I move the camera I can appreciate some lens distortion. I also noticed that the pictures taken with the rear camera are saved with a lot of background noise. It is normal?
If I disable HAL3 (into /vendor/build.prop), replace libmmcamera_platina_imx576_sunny.so (into /vendor/ lib/ ) and restart the device to be able to use the front camera, it takes photos but camera interface freezes instantly.
I am using Pixel Experience Pie (aosp version 2019 05 08) with Acrux Kernel 1.0.1 Stable
Click to expand...
Click to collapse
Put beauty mode to 0 and then you can shoot with front camera without freezing, noise is there, but pictures have much more details in comparation with stock mi 8 lite camera. I will post new version with night mode and longer default shutter speed soon, also i find how to fix beauty mode. Lens disortion is associated with cameraservice lib, stock lib from mi8 lite make lens totally distorted and wrongly oriented. I will try to fix disortion if i can. Miui camera from Pixel expirience don't use second lens for depth ??
Can i install this on RR Rom?
Great!!
keep a good work devs
panjisung said:
Can i install this on RR Rom?
Click to expand...
Click to collapse
Try to flash module with magisk, if camera app don't get installed you need to delete other camera apps manually via root file manager and flash again. With some roms camera won't get installed and after flashing you need to extract module and copy from priv-app miuicamera folder together with other libs in miuicamera priv-app in your phone
Good work, working on pe caf ?
Edit
After replace lib, 3rd party app like WA, IG cant access front cam ?
xteroit said:
Good work, working on pe caf
Edit
After replace lib, 3rd party app like WA, IG cant access front cam
Click to expand...
Click to collapse
Use lib form my post, disable camera2api, and add this line to vendor/build.prop persist.vendor.camera.HAL3.enabled=0 Every app should work then with Pe, there is no benefit from Gcam if you broke everything with camera2 api enabled. Miui camera taking great photos now and portrait work perfect
Stefke93 said:
Use lib form my post, disable camera2api, and add this line to vendor/build.prop persist.vendor.camera.HAL3.enabled=1 Every app should work then with Pe, there is no benefit from Gcam if you broke everything with camera2 api enabled. Miui camera taking great photos now and portrait work perfect
Click to expand...
Click to collapse
So i need to edit build.prop
persist.vendor.camera.HAL3.enabled=0 to disable cam2api?
Prefer front cam from miui 24mp, and back cam from gcam, but i will try..
Exactly, copy lib in vendor and turn off HAL3 to 0, and everything will work perfect, but Gcam will be broken.
It works on BootleggersROM, thank you very much.
gatolar said:
It works on BootleggersROM, thank you very much.
Click to expand...
Click to collapse
Yep bro, port work very smooth on Bootleggers, you can try Viper OS too ?
To Stefke majstore svaka ti dala ovo sam cekao dugo!
(Great job dev!)
Works awesome on RR with lib replaced.
Is there a way of adding Night mode?
Immortal0907 said:
Is there a way of adding Night mode?
Click to expand...
Click to collapse
Yes, HHT mode can be fixed, accidentally i broke something and now seems like don't work, also different scenes can be added, problem is with Platina xml in device feature folder, some lines are wrong ??
Why does the interface look like this? Did I do something wrong? Please help me [emoji24]
Enviado desde mi MI 8 Lite mediante Tapatalk
It's something about nav bar and gestures. With nav bar active there's no problem View attachment 4782697
Enviado desde mi MI 8 Lite mediante Tapatalk
Increased Bitrates (20% over stock) - 4K60, 4K, QHD, 1080p60, Slow Motion
Increased JPG quality for single and burst shots - Default was 92, now 100
Pro Video Mode
No Recording Time Limits
Record 4K60 to external SDcard
Installs latest Samsung Camera revision
Remove 4GB video file size limit - App only
Adjust Photo/Video Edge Sharpness & DeNoise settings - App only (Exynos only currently)
Custom bitrates - App only
1080p, 18:5:9, 720p bitrate adjustment - App only
Custom Shutter Speed > 10 seconds - App only
Choose your own custom Gallery - App only
23 Feb - v2
Camera update v10.0.00.72
App Only options are mostly due to library, xml file changes which have to be patched specifically to your model and something I don't have the time to maintain for different models.
JPG quality on S10 / N10 default is awful at 92 compression.
Camera Mod App - Paid
Download Now - Magisk Free Version
Adjust Photo/Video Edge Sharpness & DeNoise settings -
please add snapdragon support
Can I use this camera on LOS 17?
Jab_ said:
Can I use this camera on LOS 17?
Click to expand...
Click to collapse
No the rom needs the SamsungCamera.
Great..
Many many thanks for the Magisk version.
it works ... :good:
Works great! Realy good work, thanks! so, what's the difference with SamsungCamera 10.0.0.80? On s10+ works well but i can't see the difference!
any more review about this i wanna buy it
Does it allow to record at 60fps with the wide lens 0.5x camera?
Working on s10+ (g975f)? I try on ambasadii rom and after apply magisk module, no camera app on launcher.
app has v10.0.00.72 camera version, my original is v10.0.00.80..
DeeJay-DEFFI said:
Working on s10+ (g975f)? I try on ambasadii rom and after apply magisk module, no camera app on launcher.
app has v10.0.00.72 camera version, my original is v10.0.00.80..
Click to expand...
Click to collapse
Works fine on the same phone and the same rom. Camera app versione change to .80 to .72.
Hello and thanks for the app and mod! does it work with exynos s10e, cause I'm planning to buy one!
So, I've the app updated. Do we need tu use the magisk module anyway? Does it need to be updated?
Is this thread dead?