A20e Root,Kernel, TWRP and custom ROM - Samsung Galaxy A20 ROMs, Kernels, Recoveries, & Ot

Root & TWRP from Xyn XDotnest
https://forum.xda-developers.com/ga...overy-twrp-3-4-0-0-galaxy-a20e-a202f-t4141767
Orange Fox Recovery from @Royna
https://forum.xda-developers.com/ga...ngefox-recovery-project-t4191645#post83945899
TWRP 3.4 & 3.5 from @Topser99
-product wipeingui
-vendor wipeingui
-flash dt.img
-flash dtbo.img
-mount efs ext4
-Fixed MTP connection (connect to laptop via USB)
By : @Topser99
-update kernel
By : @physwizz
Follow :
Series A: https://t.me/ultimate_Pie2
A20/A20e: https://t.me/Galaxy_A20_official
TWRP from @Topser99
Twrp-sm-a20e - Google Drive
drive.google.com
Official TWRP
TWRP Official Recovery for A20 and A20e
physwizz-a20e 1.70 GSI or OneUI
@physwizz
Zip installer from @Topser
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-Extended battery life
-Works with Magisk 19.3 - 21.4
-Spectrum support enabled
-mtp enabled
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
Source Code for kernel: https://github.com/physwizz/physwizz_A20e_kernel
ROM Ultimate Q S21 portInstalling Custom ROMs
UltimateQ_S21_Port_A202f_V3.zip | by shumway66 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
QwizzROM
[ROM] QwizzROM for a20e (a202)
Telegram
A20/A20e: https://t.me/Galaxy_A20_official

To overclock set CPU minimums to 2080 big and 1690 little
Installing Custom ROMs
@physwizz
1. Backup calls and texts using sms backup and restore .
2. Reboot into twrp.
3. Backup boot, data, system, vendor, product to sd card in case you want to go back to your current system
4. Wipe caches, data, system
5. Install Rom and your kernel
6. Format data (not just wipe) and then Install dmverity
7. Wipe caches. Don't reboot
8. Go to main menu. Select reboot. Select recovery
9. Reboot to system
10. Wait a long time (up to 10 minutes?)
Select your language
11. Restore data from smart switch or Google restore
or
Skip through setup and Restore data from twrp
12. Install Magisk if you want root
13. Install dmverity (in case step 8 didn't work)
If you need to install GApps
14. Wipe, advanced wipe
15. Select system, repair or change
16. Resize file system
17. Install GApps
To backup ROM before you go to a new system
Backup boot, data, system, product, vendor

quizboo said:
Click to expand...
Click to collapse
Thanks for that
I will now overclock and underclock

quizboo said:
Click to expand...
Click to collapse
Could you please let me know if this TWRP works?
https://mega.nz/file/stlGlaSZ#uo2tG4JYSaC7xqP8H4HYEnPXFZUafB9uETn8y4GGRLk

Works kernel

physwizz said:
Could you please let me know if this TWRP works?
Click to expand...
Click to collapse
recovery boots but touch is dead had to use a mouse to restore recovery backup

physwizz v1.51 A20e
Most securities disabled
All CPU Governors enabled
Interactive is default governor
SE linux enforcing
Works with Magisk 21
Works with stock dbto
GPU 343 - 1300

quizboo said:
recovery boots but touch is dead had to use a mouse to restore recovery backup
Click to expand...
Click to collapse
I'll let him know.
 @Topser99
Thanks

quizboo said:
recovery boots but touch is dead had to use a mouse to restore recovery backup
Click to expand...
Click to collapse
Could you please try kernel 1.51
https://forum.xda-developers.com/showpost.php?p=83827245&postcount=8

physwizz said:
Could you please try kernel 1.51
Click to expand...
Click to collapse
It's working. Too bad I can't post any links for screenshots yet.

quizboo said:
It's working. Too bad I can't post any links for screenshots yet.
Click to expand...
Click to collapse
Working on v1.53
V1.0 is the current stable version

Latest version for testing
@quizboo @emmanuelo7
physwizz v1.55 A20e
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2184
-Little: 208 - 1690
-Works with Magisk 21
-Spectrum support enabled

physwizz v1.56 A20e
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2184
-Little: 208 - 1690
-Works with Magisk 21
-Spectrum support enabled

Thank you for building a custom kernel for A20e:good:

Royna said:
Thank you for building a custom kernel for A20e:good:
Click to expand...
Click to collapse
My pleasure
enjoy
8 people have downloaded from here

quizboo said:
recovery boots but touch is dead had to use a mouse to restore recovery backup
Click to expand...
Click to collapse
Try the new TWRP in post #1

Does MTP and ADB work in this TWRP recovery? Because I have compiled one too.

Royna said:
Does MTP and ADB work in this TWRP recovery? Because I have compiled one too.
Click to expand...
Click to collapse
yes

Royna said:
Does MTP and ADB work in this TWRP recovery? Because I have compiled one too.
Click to expand...
Click to collapse
Can you post it?

Related

[ROM/KERNEL][JB][14-09-12][0.6] AniDroid-JB-N7000 (CM10 | 3.0.15 | SLQB | OC/UC)

AniDroid-JB-N7000​
Short ROM/Kernel information:​
AniDroid-JB-N7000 is AOSP JellyBean ROM based on the latest CM10 source.
AniDroid-JB-N7000-Kernel is a kernel for AOSP JellyBean ROMs. It was built with the latest Linaro Toolchain (GCC 4.7.1)​
Provided Features:
Linux Kernel version 3.0.15 (safe to use, without MMC_CAP_ERASE-related BUG)
Kernel built with the latest Linaro Toolchain (GCC 4.7.1)
CWM Recovery v6.0.1.3
SLQB Memory Allocator instead of default SLUB
CPU Overclocking (OC) support up to 1600 MHz
CPU Overvolting (OV) and Undervolting (UV) support for every frequency
GPU MAX Frequency changed to 250 MHz to save more battery
GPU Voltages are decreased to save more battery
NEW CPU Frequence Scaling Governors: PegasusQ, Adaptive, MinMax, SmartAssV2, InteractiveX, ConservativeX, LagFree, LulzactiveV2, Intellidemand, Scary, LionHeart, Wheatley, SavagedZen, BrazilianWax
CPU Voltage Control - Undervolting/Overvolting (UV/OV, use with NSTools App)
Automatic Process Group Scheduling
USB OTG support (please use with special USB Host OTG Cable)
EXT4, CIFS filesystems support
init.d support
2048 Kb ReadAhead
CPU Frequence Scaling Governors:​
PegasusQ
Adaptive
Conservative
Userspace
Powersave
Ondemand
Performance
MinMax
SmartAssV2
InteractiveX
ConservativeX
LagFree
LulzactiveV2
Intellidemand
Scary
LionHeart
Wheatley
SavagedZen
BrazilianWax
IO Schedulers:​
SIO
CFQ
Noop(Default)
Deadline
Installation instructions:​
If you are coming from the previuos version of AniDroid-N7000:​
Download ZIP file with the version of AniDroid-JB-N7000 and put it on Internal/External SD-card
Download ZIP file with Google Apps and put it on Internal/External SD-card
Boot into ClockworkMod Recovery
Choose "Install ZIP from SD-card/External SD-card"
Choose ZIP file AniDroid-JB-N7000 ROM you've just put on SD-card
Choose "Yes" to flash the ZIP
Flash ZIP file with Google Apps in the same way (you must do it after flashing every new version of AniDroid-N7000!!!)
If you are coming from another ROM:​
Download ZIP file with the version of AniDroid-JB-N7000 and put it on Internal/External SD-card
Download ZIP file with Google Apps and put it on Internal/External SD-card
Boot into ClockworkMod Recovery
If you are on a leaked ICS kernel, please flash a known safe kernel from the sticky in the development section!!!
Do a Nandroid Backup to make full backup of your currently installed firmware
Choose "Wipe Data/Factory Reset" and choose "Yes" to do a full wipe
Choose "Install ZIP from SD-card/External SD-card"
Choose ZIP file with AniDroid-JB-N7000 ROM you've just put on SD-card
Choose "Yes" to flash the ZIP
Flash ZIP file with Google Apps in the same way (you must do it after flashing every new version of AniDroid-N7000!!!)
Changelog:​AniDroid-JB-N7000 v0.1 - v0.2:​
Initial version
AniDroid-JB-N7000 v0.2 - v0.3:​
Fixed BUG with CPU Frequency Scaling Governors availability
AniDroid-JB-N7000 Kernel v0.3 - v0.4:​
CPU Overclocking (OC) and Underclocling (UC) support from 100 MHz to 1600 MHz with 100 MHz step added
AniDroid-JB-N7000 Kernel v0.4 - v0.5:​
CPU Overvolting and Undervolting FIX
AniDroid-JB-N7000 Kernel v0.5 - v0.6:​
CPU UnderClock to 100 MHz temporarely removed
CPU voltage for 1600 MHz increased to improve stability
Support for Triangle Away enabled
KSM support enabled (Kernel Samepage Merging) to optimize memory usage
SIO I/O Scheduler support added
Download Links:​
ROM Binaries (v0.5):
AniDroid-JB-N7000-v0.5_10092012.zip
AniDroid-JB-N7000-v0.5_10092012.md5
Kernel Binaries (v0.6):
AniDroid-JB-N7000-Kernel_v0.6_14092012_CWM_Flashable.zip
AniDroid-JB-N7000-Kernel_v0.6_14092012_CWM_Flashable.md5
Previous versions:
Previous versions binaries
Kernel Source Code:
AniDroid-JB-N7000-Kernel on GitHub
Google Apps:
GApps
Donators: Petr Malek, Chasmodo, Lucian1, Dtswk, Mfractal, Jolillo, Antonius0809, Christian Murmann
​
Great Thanks to CyanogenMod for the ROM and kernel base!!!
Thanks to eugene373, koush, ezekeel, supercurio, morfic, franciscofranco, sztupy, reddv1, byeonggonlee!!!
​
First one...!!! Amazing...!!! Great to see more awesome roms on JB....
Yes!!!!
Sent from my GT-N7000 using xda premium
Ah, finally. Good to see AniDroid getting a JB upgrade, well done Novic.
Also, I get a new JB kernel to update in Kernel Repository.
Sorry, v02 kernel have a little BUG that prevents you from changing CPU Freq Governor...
Just fixed it and soon upload the new version of kernel..
Except for what you already stated, kernel works just fine on AOKP as well... I am on Half Illusion CP 3 currently.
Edit: Governor issue resolved with v.03 on HI AOKP, confirming.
Sent from my GT-N7000 using xda premium
Just uploaded the version of Kernel..
Please, install the latest one
Will you make O/C-ability kernel?
mbudh said:
Will you make O/C-ability kernel?
Click to expand...
Click to collapse
Yes, will include the OC functionality soon
was waiting for that
will report soon
thanks
Amazing, glad to see you back in action novic!
Just uploaded 0.4 version of kernel with OC and UC support (from 100 to 1600 MHz with 100 MHz step)
Thank you for OC and UV kernel.
I can change voltage from 1100 to 1600 MHz but for clock 1000 MHz and below I can not change the voltage lower. Whatever I press the slider down and save, it always comes back to default.
I use Voltage Control and System Tuner Pro.
Is that a bug or I made a mistake?
Btw, can you increase the thermal throttling clock higher than 800 MHz? 1200 MHz is still safe and we can get better performance. I used to have 1400 MHz with "Odin's son" kernel in CM9.
Thank you.
Thanks! Will fix it in the next versions!
PS: All voltages below 1000mhz are decreased to the most stable values to save battery
mbudh said:
Thank you for OC and UV kernel.
I can change voltage from 1100 to 1600 MHz but for clock 1000 MHz and below I can not change the voltage lower. Whatever I press the slider down and save, it always comes back to default.
I use Voltage Control and System Tuner Pro.
Is that a bug or I made a mistake?
Btw, can you increase the thermal throttling clock higher than 800 MHz? 1200 MHz is still safe and we can get better performance. I used to have 1400 MHz with "Odin's son" kernel in CM9.
Thank you.
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
Hi,
caming from anidroid ics, i flashed this JB anidroid yesterday but i got a bootloop... need to do a fullwipe, install anidroid v0.2, flash kernel 0.3, reboot in recovery, flash gapps and than everything was ok !!
I see new versions in 1st post, can i just flash the kernel v0.4 or do i need to flash the complete rom?
Atm, i had three issues:
- the clock was stucked, need to reboot the phone
- no deepsleep, changed governor to lulzactive then ok
- tried to change dpi to 280 with dpi changer but got a black screen (no bootanimation)
Other remark:
Contacts pictures during call still pixelized...
Anyway very good rom, thanks :victory:
++
You should flash 0.4 kernel over the ibstalled ROM, with no need to flash the complete ROM.
nogit said:
Hi,
caming from anidroid ics, i flashed this JB anidroid yesterday but i got a bootloop... need to do a fullwipe, install anidroid v0.2, flash kernel 0.3, reboot in recovery, flash gapps and than everything was ok !!
I see new versions in 1st post, can i just flash the kernel v0.4 or do i need to flash the complete rom?
Atm, i had three issues:
- the clock was stucked, need to reboot the phone
- no deepsleep, changed governor to lulzactive then ok
- tried to change dpi to 280 with dpi changer but got a black screen (no bootanimation)
Other remark:
Contacts pictures during call still pixelized...
Anyway very good rom, thanks :victory:
++
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
nogit said:
Hi,
...
Atm, i had three issues:
- the clock was stucked, need to reboot the phone
- no deepsleep, changed governor to lulzactive then ok
- tried to change dpi to 280 with dpi changer but got a black screen (no bootanimation)
...
Anyway very good rom, thanks :victory:
++
Click to expand...
Click to collapse
The only 2 ways for changing DPI without black screen
1) ROM Toolbox Lite/Pro
2) File Explorer with root access (e.g. Root Explorer) and manually edit build.prop in /system
ro.sf.lcd_density=XXX (<- your choice)
Paranoid on Belly Jean // HydraCore 4
Is there fast charge in this from? If not can we get a version with it implemented? It is highly essential at my workplace
novic_dev said:
You should flash 0.4 kernel over the ibstalled ROM, with no need to flash the complete ROM.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ok done, any ideas about contact pictures bad aspect?? if i change the picture it looks good but after flashing rom the pictures are getting bad again...
AA1973 said:
The only 2 ways for changing DPI without black screen
1) ROM Toolbox Lite/Pro
2) File Explorer with root access (e.g. Root Explorer) and manually edit build.prop in /system
ro.sf.lcd_density=XXX (<- your choice)
Paranoid on Belly Jean // HydraCore 4
Click to expand...
Click to collapse
thanks dude, will give a try to rom toolbox
The good old lock screen delay we had in the early ics roms is back.If i remember it was a kernel issue.
Also the whole phone is somewhat slower in every aspect.I came directly from ics 1.0,no full wipe if that matters.
Will download 0.4 now.
Sent from my GT-N7000 using xda premium

[STOCK 5.0.2] LollipopExtended Kernel for G2 Mini

LollipopExtended Kernel for LG G2 Mini (-L.E.K.-)
General information
Author: Nikita Pro Android
What is it: stock kernel with added features, most of them can be disabled/enabled on your own.
For what ROM is it: any 5.0.2 STOCK-based ROM
Kernel version: 3.4.0
LGE source code version: v20b (the last available for G2 Mini & L90)
Kernel toolchain: official last google ARM-EABI-4.8​
Changes in kernel:
1) Added GPU overclock (533 MHz)
2) Added RAM overclock (566 MHz)
3) Added new CPU frequency: 499 MHz.
4) Added new GPU governor: conservative
5) Fixed simple_ondemand GPU governor crash - now it's working fine
6) Added Simple GPU Algorithm by Faux123 - additional for msm_adreno-tz GPU governor.
7) Some tweaks for GPU drivers - now it displays not visible before the "zero" GPU frequency 19 MHz
8) Added new CPU governors: conservative (already was in kernel, just enabled), interactive (already was in kernel, just enabled), pegasusQ, wheathley, zzmove, intellidemand, intelliactive, intellimm
9) Added INTELLI_PLUG & Alcucard_hotplug
(analogs for standart MPDesicion)
10) Added new I/O shedulers: cfq,
sio, sioplus, fiops, fifo, vr, zen
11) Added USB forced fast charge V2 (now there's no bug with charging battery icon after unplugging phone)
12) Added KSM Page Check (kernel object which check if page already has scanned)
13) Added Dynamic FSync (fs tweak)
14) Added powersuspend v1.5 (new google driver for autosleep - configure in Kernel Auditor -> Misc Controls -> Power Suspend Mode, set on "autosleep").
15) Added some minor tweaks and optimizations (NOT any -O3 "super" optimizations which just add bugs and random reboots)
v2.0:
16) Updated RAMdisks (D410 - V20D, D405/D405n - V20C)
17) Added support for init.d (to enable write in build.prop sys.init.d=on)
18) Added support for Faux Sound Control
19) Added many new TCP algorithms (by default "cubic")
20) Applied some kernel patches from codeuarora forum (caf)​
Download:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LG D618 https://yadi.sk/d/1OCubkUWmrNfg
LG D620(r) : https://yadi.sk/d/vAtsChQomrNgC
ALL VERSIONS (folder): https://yadi.sk/d/5Zv8j9s3iDrrV​
Installation:
Before installation it's recommend to delete all apps for kernel set up to avoid conflicts.
1) Be sure that you have LG G2 Mini model D618 or D620.
2) Be sure that you have 5.0.2 STOCK-based ROM.
3) Download .zip from spoiler above.
4) Go to recovery.
5) Do wipe cache.
6) Install downloaded .zip.
7) Reboot, wait until system will fully load.
8) Reboot again, wait until system will fully load.
9) Install Kernel Auditor and set up kernel as you like or just enjoy sun at the window ​
To set up kernel on your phone I recommend to use: Kernel Auditor - Google Play link​
XDA:DevDB Information
LollipopExtendedKernel, Kernel for the LG G2 Mini
Contributors
Nikita Pro Android, faux123, Attack11
Source Code: https://github.com/NikitaProAndroid/android_kernel_lge_qualcomm_msm8226
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2015-08-02
Created 2015-08-02
Last Updated 2016-01-22
¯\_{ツ}_/¯
Wait, I don't see init.d in the features list. Is it included?
Vagelis1608 said:
Wait, I don't see init.d in the features list. Is it included?
Click to expand...
Click to collapse
No. I tried your method with sysinit.sh from kitkat kernel but test script did not work.
But it's easy to add init.d support in ROM by flashing this .zip via recovery: https://yadi.sk/d/U6QL57k0i4Z4t
Nikita Pro Android said:
No. I tried your method with sysinit.sh from kitkat kernel but test script did not work.
But it's easy to add init.d support in ROM by flashing this .zip via recovery: https://yadi.sk/d/U6QL57k0i4Z4t
Click to expand...
Click to collapse
Where is the RAMDisk located in the source?
I will see if I can get it working.
Also, did you disable SELinux?
How to overclock RAM? What are the best governors for i/o, gpu and cpu?
Vagelis1608 said:
Where is the RAMDisk located in the source?
I will see if I can get it working.
Also, did you disable SELinux?
Click to expand...
Click to collapse
as I can flash in lollipop stock if there is no recovery?
finaly !!! i've been waiting for it
EDIT : the perfect combination !! V20D + L.E.K. + 500 Mg zram with kernel auditor + L Speed Tweaks !!!
up to 12 apps without any lag !
ricardo231 said:
as I can flash in lollipop stock if there is no recovery?
Click to expand...
Click to collapse
Custom recoveries do not need a specific android version.
They work on all android versions.
Vagelis1608 said:
Custom recoveries do not need a specific android version.
They work on all android versions.
Click to expand...
Click to collapse
could indicate how managed to install it?
Sorry, translator use
ricardo231 said:
could indicate how managed to install it?
Sorry, translator use
Click to expand...
Click to collapse
Sorry forgot about that, will add soon.
Vagelis1608 said:
Where is the RAMDisk located in the source?
I will see if I can get it working.
Also, did you disable SELinux?
Click to expand...
Click to collapse
I do not upload ramdisk - not many changes in it.
Selinux must set on "permissive" after boot.
cretu01 said:
How to overclock RAM? What are the best governors for i/o, gpu and cpu?
Click to expand...
Click to collapse
Every RAM freq synced with every CPU freq. So, on 1190 MHz CPU you will have 566 MHz RAM.
Read in internet about governors and shedulers - it's on your own. I choose intelliactive+msm_adreno-tz (with Simple GPU algorithm settings)+sioplus.
Nikita Pro Android said:
Sorry forgot about that, will add soon.
Click to expand...
Click to collapse
as? you enter into recovery mode in the stock 5.0.2
ricardo231 said:
as? you enter into recovery mode in the stock 5.0.2
Click to expand...
Click to collapse
Root -> Install hack aboot image -> Install recovery.
Nothing difficult.
Nikita Pro Android said:
Root -> Install hack aboot image -> Install recovery.
Nothing difficult.
Click to expand...
Click to collapse
No tutorial for installing the recovery in stock 5.0.2
ricardo231 said:
No tutorial for installing the recovery in stock 5.0.2
Click to expand...
Click to collapse
As on kitkat - download and unpack .zip with custom recovery, then install .img with Flashify.
Nikita Pro Android said:
I do not upload ramdisk - not many changes in it.
Click to expand...
Click to collapse
I don't think it's possible to add init.d support at zImage. Only RAMDisk.
I could unpack the RAMDisk with Android Image Kitchen, mod it and sent you the modded version. If you want me to.
BTW, what do you mean with this:
Nikita Pro Android said:
Selinux must set on "permissive" after boot.
Click to expand...
Click to collapse
It does or you want it to?
I see you switched installation spoilers for G2 mini and L90
What about version for stock KK?

(Kernel)(LP/MM)(32-Bit) Phantom Kernel 2.0 for Lenovo A6000/Plus

I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
Compiled From Latest Linaro 5.3 Where As Phantom v1.0 Was From 5.1 Thereby Bringing More Awesomeness To Your Device.
------Phantom-2.0-------
Hello Guys I Harsh_it Jain Proudly Present To You my Latest work.
Phantom 2.0
Successor Of Phantom 1.0 Phantom 2.0 has a huge Lot Of Changes Comming To Features :-
New Multicore Descision Making Efficiency With reduced Latency
^^Fully Coded by Me (Used Simple Concept that we Use In 10th Class And All Here What I did Is just Coded One Script Worth 378 Lines - yup 378 line so what it Do is It will Check the workload and will use the Maximum Payload per core to finish the Work If payload exceeds 75% of the coreCpuFreq then The Other core Is automatically called with Already 25% of workQue Added To It With pagged and Swapped thereby Increasing Performance Drastically)
Badly Tweaked Thermal Engine
Increased Multicore Performance To Get Best Out Of Cores
This Summer Stay Cool With New Optimized Thermal Engine
Cpu oc 1.6 Gpu Oc 465mhz
Governers
1 Ondemand
2 interactive
3 Userspace
4 Elemental X
5 BioShock
6 LionFish
7 HellsActive
8 Alucard
9 Zzmoove
10 impulse
11 Ondemand Plus
12 Alucard
13 Nightmare
14 Darkness
15 Yankactive
16 Conservative
17 Powersave
18 Performance
Ton Of them and I Already Tweaked Them Badly Updated Alucard Zzmoove and Interactive to Latest With Franco Kernel Source , HellisCore Kernel Source Etc
I/O Schedulars
1:-Noop
2 Deadline
3 CFQ
4 BFQ
5 Zen
6 FIOPS
7 Row
(Updated Row Noop Deadline To Latest Possible Sources Where as 1.8 Driver VersioN for BFQ )
HotPlugs
1 - AutoSMP
2 - Intelliplug
3 - Mako
4 - Alucard plug
5 - MsmSleeper
(Updated Intelliplug To 5.0 and Powersuspend to 5.0 Alucard HotPlug To 3.2 Mako Ported From Nexus Directly Without Changes so I used Dummy FrequencY File dont cry that you see 18000 MHZ)
A Hell Lot Of tweakings
for Cpu and GPU
aggresive Battery Saving Tweaks
Click to expand...
Click to collapse
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch
Reserved
mshoaib7 said:
I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch
Click to expand...
Click to collapse
Are you tested it?
nangdha said:
Are you tested it?
Click to expand...
Click to collapse
its already tested and it works like a beast
ScreenShots
Tested Working Good On Mokee A Good amount Of features
dev_harsh1998 said:
Tested Working Good On Mokee A Good amount Of features
Click to expand...
Click to collapse
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen
nangdha said:
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen
Click to expand...
Click to collapse
Which MIUI 7 ? Try it on MIUI 7 Russian build
mshoaib7 said:
Which MIUI 7 ? Try it on MIUI 7 Russian build
Click to expand...
Click to collapse
Yes, i was on Miui7 Rusian build version 6.4.28 already. Downloaded from here.
Now i switch back to gods kernel R1.
plzz give me the link of ur mokkee rom other wise give a fix for my mokee wifii bug
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast
shivansh khare boy said:
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast
Click to expand...
Click to collapse
1. Open terminal emulater
2. Type "su"(without quotes) and grant root access
3. Type "svc wifi disable"
4. Type "insmod /system/lib/modules/wlan.ko
5. Type "svc wifi enable"
Now your wifi should work. To avoid doing this on every reboot make init.d script for it
init.d script
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks
Very nice:good:
shivansh khare boy said:
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks
Click to expand...
Click to collapse
You can make init.d by KernelAdiutor btw..
Brother, please give me the script.
Loknath said:
Brother, please give me the script.
Click to expand...
Click to collapse
Extract and copy 01wlanon file in system/etc/init.d and reboot. If it doesn't work automatically after reboot, you will have to execute the script manually from Kernel Adiutor
Thanks brother it worked for me
Hey, Is there any problem if I use this kernel with exposed?
shivamgupta1996 said:
Hey, Is there any problem if I use this kernel with exposed?
Click to expand...
Click to collapse
Haven't tried it but it shouldn't create any problem
mshoaib7 said:
Haven't tried it but it shouldn't create any problem
Click to expand...
Click to collapse
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit
shivamgupta1996 said:
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit
Click to expand...
Click to collapse
You will have to manually execute the script from kernel adiutor app

[KERNEL][v500] BR.Kernel v1.05 [2018-01-10]

BR Kernel ​Based on Lineageos kernel​
Features
Linux 3.4.113
Built with UBERTC 7.2.1
Governors: bioshock, elementalX, intellim, interactive, ondemand, perfomance, powersave, smartmax, userspace
I/O Schedulers: bfq, cfq, deadline, fiops, maple, noop, zen
CPU hotplugs: IntelliPlug, AutoSMP
Custom voltage control
F2FS support
TCP Congestion Control
USB fastcharge
MultiROM Support
and more...
Installation Instructions
Download the zip file and save it into the root directory of internal/external storage
Reboot into recovery
Make backup boot partition
Flash the zip and reboot
Default settings
CPU frequency: 384MHz to 1.566GHz
CPU governor: elementalx
Hotplug: AutoSMP
Input CPU Boost: disabled
I/O Scheduler: zen
Fastcharge: enabled
Downloads
AndroidFileHost​
XDA:DevDB Information
BR Kernel, Kernel for the LG G Pad 8.3
Contributors
beroid
Source Code: https://github.com/beroid/android_kernel_lge_v500/tree/nougat
Kernel Special Features:
Version Information
Status: Stable
Created 2017-06-20
Last Updated 2018-01-10
Reserved
Can be flash in Stock Rom V30?
Jansxel said:
Can be flash in Stock Rom V30?
Click to expand...
Click to collapse
no
beroid said:
no
Click to expand...
Click to collapse
No stock, as in ''for custom/AOSP only'' ? Would be great
Cheers and TIA
Great and thanks for kernel.
Im flashing it with twrp and not boot on rom(im with aosp of adrianom)it reboot only in twrp
Thanx beroid for your valuable efforts buddy!
and...Would this kernel be suitable for gaming in AOSP N, Coz TBH, AOSP and LinageOS Nougat both sucks when it comes to gaming!
The best was stock lollipop+Fishears kernel!
Flashed the kernel on latest Nougat AOSP build BUT ONLY REBOOTS IN RECOVERY!!!
In short, this kernel doesn't work with any ROM. No stock, no AOSP, no Lineage.... What is the purpose then ?
I'm on LineageOS 14.1, 20170623 nightly. kernel is working fine. device feels smoother and faster. have not tried gaming since I don't play anything on this tablet
Does it work on CRDROID?
5nickers said:
Does it work on CRDROID?
Click to expand...
Click to collapse
Yup
Sent from my Nexus 6P using Tapatalk
Update - v1.02
added IOSched switcher
patches for several CVEs
fixed installation for LOS-based ROMs
just flashed on latest lineageos and suddenly my v500 is rebooting its ass off.
with this kernel, my tab needs a few minutes to somehow stabilize. like when I boot it up and use it immediately, it reboots. it has overheating issues which makes it reboot while gaming, ex. vainglory on low settings. this got worse in 1.02. I even have mako hotplug enabled and cpu temp limit enabled
Doesn't work on AOSP, only reboots in recovery....
Thanks man !!
Awesome work upstreaming the kernel and adding all those excellent features ... Worked flawlessly here on mokee N ... Would be great if you add zzmoove as governor ! Thanks man !
Update - v1.03
Updated toolchain
Patches for several CVEs
n3loki said:
I'm on LineageOS 14.1, 20170623 nightly. kernel is working fine. device feels smoother and faster. have not tried gaming since I don't play anything on this tablet
Click to expand...
Click to collapse
Weird... LineageOS is based on AOSP, so it should work
Very useful kernel... thanks dev

[KERNEL][O] Custom kernel for xperia z3 compact

SyncedPlus Kernel​
Features:
Cpu overclock and underclock (min: 268Mhz, max: 2.7Ghz)
Different frequency table
Voltage table (undervolted by default)
New cpu governors: electroactive, syncedplus(default)
New hotplugs: cpuquiet, alucard(default with modified parameters)
Mpdecision hotplug is disabled
Gpu overclock and underclock (min: 27Mhz, max: 657Mhz)
New gpu governors: ondemand, conservative (default)
Simple GPU Algorithm
Adreno Idler
I/O Schedulers: tripndroid, fiops, vr, sio, zen(default)...
Powersuspend
Tcp Congestion Algorithms (westwood is default)
Zram disabled by default since this device has plenty of ram
Other fixes and tweaks
Instructions:
Option
Code:
fastboot flash boot z3c.img
Option
This is the easy way.
Flash it with twrp, there is option to flash .img files. Flash it in boot partition.
Downloads:
Download kernel
For rooting method I suggest using Magisk, and for kernel editor Kernel Adiutor(can see cpuquiet, don't know for other tools).
Note: For everyone who has reboot problems, adjust voltage by +10mV or more.
This is not tested version, I don't own xperia z3 compact so I can't test, please give me feedback if it works, what works, and what not.
Thanks:
Myself5
faux123
arter97
ShadowElite
Donation:
If you like my projects you can donate me.
Source code:
https://github.com/mtruma/android_kernel_sony_msm8974ac
XDA:DevDB Information
Custom Kernel, Kernel for the Sony Xperia Z3 Compact
Contributors
SyncMaster
Kernel Special Features:
Version Information
Status: Testing
Created 2019-01-13
Last Updated 2019-01-13
Tested with carbon rom 2018/12/11 and it work perfectly.
Thanks, great job!:good:
breeze101792 said:
Tested with carbon rom 2018/12/11 and it work perfectly.
Thanks, great job!:good:
Click to expand...
Click to collapse
How is the battery life?
This kernel work only oreo? MM?
surikoff88 said:
This kernel work only oreo? MM?
Click to expand...
Click to collapse
It wont work on MM.
hello! please make an omni-based kernel, because omni doesn't want to work
I have flash this on the newest carbon6.1 19-2-2019 and working very good. No bugs for now.
I've tried it with LineageOS 17.1 and it doesn't boot. https://forum.xda-developers.com/t/official-lineageos-17-1-for-z3c.4160347/
What is needed to make it work?

Categories

Resources