My device is Realme 3 pro( RMX1851) running Realme ui ver. 1.0 - RMX1851_11_C.09
I have unlocked the bootloader of the device, but everytime I try to install twrp from the fastboot command
fastboot flash recovery twrp.img
it shows an error as-
fastboot-Write to device failed(unknown error)
what do I do now?
I have installed all drivers and the device is showing up when I hit the command -- fastboot devices
I can't flash TWRP and stuck in this step for a few days now....please help
[SOLUTION]
abhi2407singh said:
My device is Realme 3 pro( RMX1851) running Realme ui ver. 1.0 - RMX1851_11_C.09
I have unlocked the bootloader of the device, but everytime I try to install twrp from the fastboot command
fastboot flash recovery twrp.img
it shows an error as-
fastboot-Write to device failed(unknown error)
what do I do now?
I have installed all drivers and the device is showing up when I hit the command -- fastboot devices
I can't flash TWRP and stuck in this step for a few days now....please help
Click to expand...
Click to collapse
Hey there, I have found the solution to this problem. So anybody having this issue can follow this up.
The error occurs due to Windows (10) drivers incorrectly installed for the device. The solution is using a secondary phone via OTG with the app Bugjaeger (tutorials available on YouTube) to flash the TWRP image to your recovery partition. I searched this up but if no other way works for you (on PC), then you should definitely go for the provided solution.
THANKS!
Related
So I tried to change the ROM of my phone because the vendor's one had malware but it was worse, my phone is stuck at boot screen and can't do anything with it.
First I tried to install a ROM with TWRP, it installed but it was just a black screen, you could only see the battery status.
Then I tried to install the global ROM that is on the official xiaomi site but it didn't work and it locked my phone.
Now I can't use TWRP, please help me. I am desperate.
Miflash isn't detecting the phone, but the PC does cause it listed under Android Phone->Android ADB Interface on device manager.
1st:
http://en.miui.com/thread-277276-1-1.html
Once you rebooted it into download mode, use this:
http://en.miui.com/thread-254606-1-1.html
My PC is no longer detecting the phone, only detects Qualcomm 9008
Ok, it is working till the miflash step it says "receiving hello packet" in red
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Feriol said:
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
After that I use miflash?
Failed after second command
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the device is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Benz83 said:
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the d: evice is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Click to expand...
Click to collapse
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
andrespm said:
After that I use miflash?
Failed after second command
Click to expand...
Click to collapse
After you run 'fastboot devices' is anything listed? Usually a string of numbers. If not then the computer isn't seeing your device.
Try rebooting the computer, and trying different USB leads and ports if possible and try again.
Using this method you don't have to use MiFlash, and is for when MiFlash doesn't work.
Once your phone is working again you can try again to install another ROM using traditional methods.
andrespm said:
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
Click to expand...
Click to collapse
Hello, i try the steps you give for EDL, after it the screen is not black but i see again the logo MI, i can go on fastboot mode but if i try to flash anykind of rom i get error "FAILED: remote: Critical partition flashing is not allowed)
other solution?
I think the only way is the unlock bootloader, but sincerally i dont know how it work. i did the steps online and the sim is on another device not xiaomi. I will get a sms from xiaomi with some kind of code? and after it how can use for bootloader?
There is another solution? I thinking....but why i cant use the original rom ?? always about the bootloader lock?
___
now i see another post ...use both volume to enter in download mode and on the miflash i saw port com 49, load a rom and start to flash it ...but....another error : The system can not find the file specified (0x80070002: Max buffer sector is 256)
___
This Morning i received the unlock code. When i use the tool stuck on 50℅
Hello guys,
i have a bricked rooted oneplus x
I had issues with the rooted rom so i flashed the newest stock rom via twrp
The phone boots up and showed the usual otimizing apps message. After the proccess is done it just the usual "let me helpt set up your phone page" and then restarts
I cant acces twrp anymore and when i try to acces the stock recovery it just shows a oneplus logo
I do have access to fastboot though (i hope that leaves some hope)
I have tried the MegaUnbrickGuide here in the forum but i wasn't able to install the drivers i need for that method
One more thing whenever i try
Code:
fastboot boot recovery.img
i get the "remote dtb not found" message
Does that have to do with developer options not being unlocked?
Any ideas on how to just get some form of working os installed on the device
(i dont care wheter rooted or not at this point have been trying stuff for hours now)
regards
Jan
First download Minimal ADB and Fastboot and install it.
Go into fastboot mode.
1. Re-unlock your bootloader using the command - fastboot oem unlock
2. After doing that, download the latest version of TWRP(which at the time of writing this is 3.1.0) and rename it to 'recovery.img'
3. Open a command window in the place you have downloaded the recovery by pressing the shift key and right clicking and then choosing the option Open Command WIndow Here... Flash the recovery using the command fastboot flash recovery recovery.img
4. Boot into it using the command fastboot boot recovery.img
5. If it still gives 'remote dtb not found' then follow this guide: https://forum.xda-developers.com/oneplus-x/help/opx-remote-dtb-solution-t3480274
6. If it boots into recovery, your phone is now fine and go ahead and flash whatever ROM you want.
Cheers!
i installed twrp to redmi note 3 through youtube video
i downloaded something called adb platform tools
then i downloaded twrp img file
kept my phone into fastboot mode and connected to my pc via usb
in cmd prompt : 1. fastboot devices
2. fastboot flash recover twrp.img
3. fastboot boot twrp.img
and my phone went to twrp recovery mode then
swipe to allow modifications
reboot
system
this is what is did, now my phone is not booting it is just showing mi logo, before while rebooting it was showing android symbol under the mi logo now that android symbol is not showing.
i have only one phone plzzzz help
VijayKumarVJ said:
i installed twrp to redmi note 3 through youtube video
i downloaded something called adb platform tools
then i downloaded twrp img file
kept my phone into fastboot mode and connected to my pc via usb
in cmd prompt : 1. fastboot devices
2. fastboot flash recover twrp.img
3. fastboot boot twrp.img
and my phone went to twrp recovery mode then
swipe to allow modifications
reboot
system
this is what is did, now my phone is not booting it is just showing mi logo, before while rebooting it was showing android symbol under the mi logo now that android symbol is not showing.
i have only one phone plzzzz help
Click to expand...
Click to collapse
Use latest twrp 3.3.1 official for kenzo.
Installed RedWolf Recovery now its working fine
Phone Encryption doesn't work for TWRP 3.3.1-0 and 3.3.0-0
Black_Stark said:
Use latest twrp 3.3.1 official for kenzo.
Click to expand...
Click to collapse
If you want phone encryption support, use TWRP 3.2.3-0, as it doesn't work properly in the following versions, namely 3.3.0-0 and 3.3.1-0.
Hello everyone !
I updated my tablet to android 9, during the update an error occured and now my tablet can't boot (it's stuck on LENOVO screen forever).
My tablet is Lenovo TB-X605F.
I tried:
- Wipe/data (recovery mode)
- Wipe/cache (recovery mode)
- Fastboot (my bootloader is locked so I can do nothing)
Note: I don't have TWRP or custom recovery, I have the default one .
I don't know what can i do please help me !
XX_MRBEAN_XX said:
Hello everyone !
I updated my tablet to android 9, during the update an error occured and now my tablet can't boot (it's stuck on LENOVO screen forever).
My tablet is Lenovo TB-X605F.
I tried:
- Wipe/data (recovery mode)
- Wipe/cache (recovery mode)
- Fastboot (my bootloader is locked so I can do nothing mSpy reviews)
Note: I don't have TWRP or custom recovery, I have the default one .
I don't know what can i do please help me !
Click to expand...
Click to collapse
I am sorry to say that but I guess nothing could be done to fix your tablet. I would be happy to proven wrong and see some solutions in this thread.
@XX_MRBEAN_XX
The mostly overlooked command
Code:
adb sideload <ROM / MOD>
may help: Get device's Stock ROM and flash it this way.
jwoegerbauer said:
@XX_MRBEAN_XX
The mostly overlooked command
Code:
adb sideload <ROM / MOD>
may help: Get device's Stock ROM and flash it this way.
Click to expand...
Click to collapse
Windows detect my tablet only when It's in fastboot. I don't know why
When I do recovery --> apply update from adb it's say "E: failed to open driver control: Permission denied"
And in my pc, ADB don't recognize my tablet (only fastboot recognize)
Btw, i downloaded my stock tablet rom
XX_MRBEAN_XX said:
Windows detect my tablet only when It's in fastboot. I don't know why
When I do recovery --> apply update from adb it's say "E: failed to open driver control: Permission denied"
And in my pc, ADB don't recognize my tablet (only fastboot recognize)
Btw, i downloaded my stock tablet rom
Click to expand...
Click to collapse
1. Looks to me that the ADB-driver you use isn't suitable: Download and install the correct driver for your Lenovo. tab:
https://devsjournal.com/download-lenovo-usb-drivers-adb.html
2. Wondering why then you didn't flash this Stock ROM by means of Fastboot ?
Code:
fastboot devices
fastboot erase boot
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot flashall <STOCK-ROM-IMG>
fastboot reboot
jwoegerbauer said:
1. Looks to me that the ADB-driver you use isn't suitable: Download and install the correct driver for your Lenovo. tab:
2. Wondering why then you didn't flash this Stock ROM by means of Fastboot ?
Code:
fastboot devices
fastboot erase boot
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot flashall <STOCK-ROM-IMG>
fastboot reboot
Click to expand...
Click to collapse
Well, i think i am ****ed because when i do these fastboot command, it's saying "FAILED (remote: 'device is locked. Cannot erase.')
And adb still don't recognize my system.
Thank you for your help
XX_MRBEAN_XX said:
Well, i think i am ****ed because when i do these fastboot command, it's saying "FAILED (remote: 'device is locked. Cannot erase.')
Click to expand...
Click to collapse
Oh man
become familiar with Fastboot-driver and its subcommands available!!!
Anyway, unlock tab's boot-loader by means of Fastboot before you carry out the commands previously shown
Code:
fastboot devices
fastboot OEM unlock
FYI: I no longer participate with this thread.
jwoegerbauer said:
Oh man
become familiar with Fastboot-driver and its subcommands available!!!
Anyway, unlock tab's boot-loader by means of Fastboot before you carry out the commands previously shown
Code:
fastboot devices
fastboot OEM unlock
FYI: I no longer participate with this thread.
Click to expand...
Click to collapse
I tried fastboot oem unlock
It's say "unknow commands"
Anyway thank you for your help !
I think we can't do something for this tablet.
Thank you very much
XX_MRBEAN_XX said:
Hello everyone !
I updated my tablet to android 9, during the update an error occured and now my tablet can't boot (it's stuck on LENOVO screen forever).
My tablet is Lenovo TB-X605F.
I tried:
- Wipe/data (recovery mode)
- Wipe/cache (recovery mode)
- Fastboot (my bootloader is locked so I can do nothing)
Note: I don't have TWRP or custom recovery, I have the default one .
I don't know what can i do please help me !
Click to expand...
Click to collapse
To rescue a bricked Lenovo device, download their LMSA tool to a Windows PC. Use the Rescue option.
Have a look on the TWRP thread for the unlock commands. They will only work if you had already enabled Developer Options and OEM unlocking before the device bricked.
Yahoo Mike said:
To rescue a bricked Lenovo device, download their LMSA tool to a Windows PC. Use the Rescue option.
Have a look on the TWRP thread for the unlock commands. They will only work if you had already enabled Developer Options and OEM unlocking before the device bricked.
Click to expand...
Click to collapse
Holy crap. My hero! Can I buy you a beer dude?
Is it possible to install twrp recovery and root using magisk in this phone or not possible because of mediatek processor?
Bhai have patience , this is Mediatek we all know but another thing to notice is This is MT- g95 SoC ?
Orange state in realme 7 when bootloader unlocked but unable to use fastboot.
I have unlocked my realme 7 bootloader with in-depth test built for realme 6 pro. It is working. But now after unlocking the phone factory resets itself and when trying to go into fastboot mode with ADB command ADB reboot bootloader the fastboot verify check fails all the time. So how to go into fastboot mode after bootloader unlock. This issue never happened when I start in-depth test after permissions. It's very strange that even after unlocking the phone is not booting into fastboot mode while giving error in verification. Guys can anyone knows how to solve this. Please reply asap.
Realme 7 After unlocking the bootloader is not going into fastboot mode again.
Can anyone tell when twrp for realme 7 wipp be available
I think i made a mistake by choosing mtk soc because it's hard chance to get twrp for mtk soc
Simple solution realme 7
Senxco said:
I have unlocked my realme 7 bootloader with in-depth test built for realme 6 pro. It is working. But now after unlocking the phone factory resets itself and when trying to go into fastboot mode with ADB command ADB reboot bootloader the fastboot verify check fails all the time. So how to go into fastboot mode after bootloader unlock. This issue never happened when I start in-depth test after permissions. It's very strange that even after unlocking the phone is not booting into fastboot mode while giving error in verification. Guys can anyone knows how to solve this. Please reply asap.
Click to expand...
Click to collapse
I think your adb driver not working please install adb driver reinstall and verfiy fails problem solve, thanks
No no adb driver is working and tested on other devices. I think the problem is with smartphone serial key ( It shows serial key mismatch and therefore fastboot unlock verify fail in fastboot mode).
To Root you phone:-
Download your device boot image > download magisk manager > patch your device boot image > go to fastboot mode > type in command >fastboot --disable-verity--disable-verification > flash vbmeta (fastboot flash vbmeta (put your vbmeta path here) > flash magisk patched image (fastboot flash boot (put your patched file path here) now reboot your phone it will be rooted if on First boot it didn't then reboot your device