I was and still can see all the trainings in the Zepp application.
I was able to see this data directly in the watch in "Activities" and partially on "main screen" as total distance in km, for example.
Then I did watch factory reset in the watch.
After reboot I was asked to restore the data which I confirmed.
I still can see my past trainings in the Zepp application but I don't see them in "Activities" in the watch itself.
Also, the total distance shows 0 in the watch.
Is it possible to load at least total distance from the Zepp app to the watch so that it shows it on the "main screen" of the watch (instead of 0 now)?
I enclose two attachments: one from Zepp application and one for the watch. After factory reset there is 0km on the watch as total distance.
thank you,
geos
Facing the same issue, I'm afraid no way around unless you backup watch before factory reset.
Related
When I went through the threads in the forum I thought it is not possible to use the tracking data on the watch as GPX data without the help of the mobile or other external Apps.
In fact it is quite easy to do this with the watch only thus you can re-use already tracked trails or routes and redo them. The integrated Sport App will show always if you are on track.
Steps to Do within Sport App:
Open Sport App
Got to "Activities" and select a specific trail track and open (with a left swipe) the "Route" and push "Export"
Now your formerly tracked route is stored in gpx format in directory /Internal Storage/gpxdata (on the watch)
Go to "Settings" and select "Sport Trail" and select the trail you want to show in your activity
Now you can start a new activity e.g. "Trail Run" and it will show inline the selected gpx route
Of course if you have gpx routes downloaded from web you can put them directly, e.g. via explorer from PC, to /Internal Storage/gpxdata too.
It looks like below when you are on running track following the GPX route and you never get lost again
bb img
Using firmware 1.3.5 with included Sport App.
PS: I like the Sports App in specfic the GPS tracking on the watch very much. It would be even greater if the Zoom (+/- buttons) good be configured or at least set in smaller steps. Currently it jumps form 50m, 200m, 2km, 5km More intermediate steps would be very helpful e.g. 50m, 100m, 200m, 500m, 1km, 2km, 5km, 10km
is it possible that when you start an activity in MiFit, the information appears on the smartwatch screen?
When I walk, I like to see the information on the watch, but only appear if I activate the activity on it. If it is by the app, nothing appears on watch's screen.
And if so could someone please explain to me how to pair it. Notify and fitness mentions unpairing from the mifit app and only pairing with notify, but when I do this the watch only shows the connect to app icon. I would love to just use notify as mifit and notified seem to fight sometimes.
Yes, you can. I use it all the time and don't have Mi fit installed.
Just click on the menu button (3 lines in top left)
Then in the menu that shows, scroll down to the option: Re-Pair with Amazfit
It will disconnect (if connected) and then pair again with the Amzfit Bip.
Works great and there is less battery loss then with Mi Fit.
Do you pair originally with mifit then uninstall it? When I unpaired with mifit nothing I do in Notify takes the watch off the connect to phone screen. Notify says it's paired but the watch doesn't.
myke66 said:
Do you pair originally with mifit then uninstall it? When I unpaired with mifit nothing I do in Notify takes the watch off the connect to phone screen. Notify says it's paired but the watch doesn't.
Click to expand...
Click to collapse
Yes, i started on my phone with the Mi fit app, but for my wife i never installed Mi fit.
What you can do after unpairing Mi fit, is using N&F and then install the latest firmware.
See here for a description what to do (follow all steps 1 through 5 except the Chinese characters step). The description is for step 5 (GPS), but simply start with 1.
http://forum.mibandnotify.com/discussion/comment/349/#Comment_349
Thank for the replies, unfortunately it's just not working. When I have Mifit uninstalled and paired with Notify, when I try to update the firmware it disconnects from Notify. I can re-pair the watch in Notify but when the firmware update starts its disconnects.
I love the concept of Notify and the custom notifications but I'm about to get a refund on the pro purchase and just use the stock software for consistency.
I tried to uninstall Mi Fit and pair through Notify. The pairing icons wouldn't go away from the watch. It looked like the phone was getting data from the watch, but the watch was not recognizing it was paired. There is a Reddit thread https://www.reddit.com/r/AmazfitBip/comments/8dhyft/do_i_need_to_keep_mi_fit_when_using_another_app/ with other people having this issue. It would be nice to only have to run one app on the phone to cut down on battery usage.
I figured it out. In the notify app, go to settings and under the advanced tab, scroll down to where it says something about the official mi fit app. Select the app isn't installed and your watch should connect to the notify app
Cannot go to the main screen of the app
Hi all,
I have a problem with my amazfit pace.
I have MiFit installed and paired (as well as Amazfit app).
Whn I install Notify and fitness asks me for permissions wich I grant and asks if the watch is correctly paired.
After that I get to a Screen with several app list to activate notifications or not but I'm not able to go to the main page with all the features...
Is this happening to someone else?
Thanks
I would like to say thank you to the devs of this app. I'm a paid user and I have a question. Is there a way to use Notify App for only integration with Sleep as Android? I use the amazfit app as I like their graphs better. Thanks
hello all, I have a Stratos with the official english version. Last OTA updated. (original is the chinese version)
the problem appears when I use a downloaded GPX track, I open and follow it but the screen appears duplicated. Also the new track drawed on it appears double.... and the grid... and the scale... as you can see in the picture...
But, when I reuse a track created with the watch it doent happen this "double view"
I use this option a lot, is the most important for me..
Maybe some bug after updating due to corrupted data, you can try to fix it by erasing all data on watch and make sure you start fresh:
1. Unpair the watch while it's connected to phone so all data will be erased;
2. Logout from Amazfit app the close it, open and login again;
3. Pair watch again but do NOT restore old data.
Then restart watch and copy your GPX data back to it. You can also check if the GPX file is OK by importing it to some other service like:
http://www.mygpsfiles.com/app/
lfom said:
Maybe some bug after updating due to corrupted data, you can try to fix it by erasing all data on watch and make sure you start fresh:
1. Unpair the watch while it's connected to phone so all data will be erased;
2. Logout from Amazfit app the close it, open and login again;
3. Pair watch again but do NOT restore old data.
Then restart watch and copy your GPX data back to it. You can also check if the GPX file is OK by importing it to some other service like:
http://www.mygpsfiles.com/app/
Click to expand...
Click to collapse
ok i will try, thank you very much
I had the same problem, I found that the problem is the size of the track name defined inside the gpx file with the label <name><\name>. I calculated that if it has more than 32 characters it generates a second line in the name inside the track visualiser and did this double track effect.
The solution, a little bit annoying... Open the gpx with code editor or txt editor, reduce the name and save it before upload the gpx file to the watch
Hi, I have a Pace, and if I start an activity (walk, run) from the phone, the app doesn't find the watch, and it can't read heart rate for example.
If I start the activity from the watch, it sync fine with the phone.
Does anyone else has this problem?
Thanks!
This is normal as the fitness part of the app on the phone is meant to be used without the watch.
Just as a backup if the watch isn't working.