I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
fwegsdfgdrg said:
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
Click to expand...
Click to collapse
check your pm sir, cz i can't post outside link right now, hope it will help you
I also have the exact same problem how can i fix my blu 5.5studio
fwegsdfgdrg said:
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
Click to expand...
Click to collapse
I have the same issue,my Samsung galaxy S 4 LTE SPH-L720T is stuck in Android System Recovery <3a> after installing the driver for 3D Pro. I have tried everything an no luck atall, PLEASE HELP!!!
abhoysm69 said:
check your pm sir, cz i can't post outside link right now, hope it will help you
Click to expand...
Click to collapse
hey brother.. will you sent me pm too???
please i need the tutorial to
bootloop
hey guys I've got the same problem delete files and boot loop help ...please..
Same problem with my BLU Studio 5.5S
it stuck on boot, but in my case, I think it has USB debugging enabled. Any help please?
hi, ,have you got solution to your problem? Im also have the same issue on my phone, ,is it possible to enable usb debugging on a stuck on boot logo? please help, ,thanks
same problem but on blu studio 6.0 hd
Sory if im posting in the wrong spot im new here. I dont have a pc. Im using a pcd chaser. Hello I have a problem with may blue studio 6.0 HD. I flashed a rom and the instructions sead no need to clear delvic or cache and now my phone is stuck in a bootloop and I can't get in to any mode to do a factory reset and I have it backed up on my SD card
ihave the same problem to sir my phone stuck on a boot loop can't turn off my phone
bahun said:
ihave the same problem to sir my phone stuck on a boot loop can't turn off my phone
Click to expand...
Click to collapse
Is there a way to go to recovery mode, do you know the key combination of your phone, can google
Endless boot look
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
BLU ENERGY X bootloop
My BLU ENERGY X is stuck in boot loop with access to fastboot only... Any tips on how to solve this?
liverite1978 said:
I have the same issue,my Samsung galaxy S 4 LTE SPH-L720T is stuck in Android System Recovery <3a> after installing the driver for 3D Pro. I have tried everything an no luck atall, PLEASE HELP!!!
Click to expand...
Click to collapse
What I figured you can do is install your stock rom and flash it.
Having same issue with my phone but I have a moto g 3rd gen., Can't get into recovery settings and usb debugging is disabled, My phone is just stuck in bootloop
stuck in bootloop....coolpad dazen x7.......no usb debugging enabled......??? how to enable in bootloop???
Blu 5.5 Studio D690U same problem!
abhoysm69 said:
check your pm sir, cz i can't post outside link right now, hope it will help you
Click to expand...
Click to collapse
I fund the rom at needrom.com then used SPFlash tool to format and download the ROM no help at all in spite of the fact that the SPflash tool reported "success" (checkmark on green background). Any ideas? P.S. For the fellow that needs to know the button combo it is <power and vol up & down, all together > then follow screen prompts.
I am also in a bootloop. I have Blu Studio G Plus. I can't seem to find the stock rom for S500Q 02
hi i have done the ota update of htc sense 6 today, the update finished the blue bar then did it again with a green bar, once that was finished the screen just went blank and has not done anything since, i have tried plugging it into the laptop it makes the noise of a usb device connected then nothing does not show as device on laptop, adb does not pick up the device eaither,
i have tried going into recovery and it does nothing please help
i have a htc one max
Were you on a custom rom and custom recovery? If so thats the reason
Wonders_Never_Cease said:
Were you on a custom rom and custom recovery? If so thats the reason
Click to expand...
Click to collapse
no i had just flashed the recovery to stock so the ota update would install and was on stock kitkat
If your able to get into recovery then your not hardware bricked..Dont know variant of device so dont know if there is an ruu available for you
Wonders_Never_Cease said:
If your able to get into recovery then your not hardware bricked..Dont know variant of device so dont know if there is an ruu available for you
Click to expand...
Click to collapse
unable to get into recovery however i can fix this issue if only i could get a pry2.49.nb0 file i can access the phone in linux and was able to back up the hboot and the hex dump from it
after speaking with someone very helpful they have asked if anyone with a working htc one max can dd partitions for me p1 p2 p9 p10 p11 p12
if anybody could do that i would be very grateful
ok guys i think i have almost fixed this just need some advise i have installed the qshusb_dload drivers and phone is picked up as qualcomm hs usb diagnostics 9006 and using a qpst tool it states phone is in download mode how do i take it out of download mode please anyone
Eveess said:
ok guys i think i have almost fixed this just need some advise i have installed the qshusb_dload drivers and phone is picked up as qualcomm hs usb diagnostics 9006 and using a qpst tool it states phone is in download mode how do i take it out of download mode please anyone
Click to expand...
Click to collapse
found the solution to the problem or not?
Hello all, I have managed to brick my Atongm H8, I was trying to change the recovery. Phone now does not boot or turn on or go to recovery but when connected via usb to windows I do get the Mediateck preloader portXX come up in device manager which is positive I think.
I used SP tools to break it, I hope I can use it to fix it, does anyone have a backup or stock rom or any suggestions of how to fix my poor phone ?
Hello every one im looking for some help on this project . I got this phone and its stuck on the Encryption Unsuccessful .I know that the core system is damaged some how .But i know what i need to fix it but i am having some problems like i need CWM Recovery or TWRP so i can wipe the system then i also need a rom or stock Zip to load back on . i found a program that would do all this for me but USB Debugging needs to be turned on but there is no way to do this because i cant get into settings .Things i found i can do is Sideload i downloaded a file called ZTE GRANDX Tools but cant use anything in it because USB Debugging needs to be turned on any help ? also yes i did do a factory reset .
Hello guys!
I've been trying and reading as much as possible and I haven't been able to bring my Viyo 5 Mini back to life, using SP FLASH TOOL, I have installed the drivers many times and in many different ways but nothing.
After a while looking up I found somwhere somebody said to deactivate the antivirus, I did it and it worked out but my phone ended up without IMEI and with the NVRAM error, so as it worked ONCE I tried to install a recovery to root it and fix these problems, but I got it bricked again, I tought I could rescue it again but after this it doesnn't work, the pc does the sound when I plug the phone but the SP Flash Tool does not start.
I install the drivers and they appear on Device Manager but they have the code 10 error saying the devices cant't start, only ONE works, the one that says Preload.
please someone help me I'm going crazy, I'm not very good at this but I used to handle it very well, it's this phone that is giving me trouble.
my pc it's on 64 bit and win 8, in case that info matters a lot, I have also tried running the SP Flash tool on XP (SP3) commpability
I have been switching the driver of the only device that seems to work to the others to see but still nothing.
thanks in advance for any help
the phone version again is Blu Vivo 5 Mini V050Q