Related
Fixes autobrightness and minimal brightness level on MIUIv7 (5.x-6.x).
Removes ugly chineese code that sets range of auto brightness levels to 3 (0, 120, 2000). Also fixed code that automaticly sets minimal screen brightness to 40 (now it's 1, before you may see increased brightness slider in manual mode after setting it to minimal level. Now - it's fixed too.)
Also you can change levels manual in module UI
Requirements
Your phone must be rooted
Xposed framework must be installed first
Instructions
Install the module
Activate module in Xposed Installer
Reboot
Enjoy!
Credits
Thanks to urix2003 for autobrightness patch and to anvert for his thoughts about minimal brightness level!
Download
Xposed Module Repository
What about 4.x ?
I can't install this apk on my MIUI 7, it said "There was a problem parsing package", please repair it ,thanks~
This module only for android 5.x-6.x. I was reversed KutKat MIUIv7 and didn't find this ugly code for brightness conttol
Tried to install but ended in a bootloop after activating the module. Device details be below:
Phone: Xiaomi Mi 4c
OS: MIUI 7.2.1 Stable
Xposed framework v80 solarwarez version 64bit.
I really wanted this module to work as MIUI auto brightness sucks big time. Please do tell what data is needed to fix the bootloop I'll be happy to provide them
Version 1.2 released. Fixed bootloop on some devices. Thanks to chickentuna for issue and testing.
Got bootloop on MIUI 7 rom 6.3.17 on Redmi note 3 pro.
gangstar.a2 said:
Got bootloop on MIUI 7 rom 6.3.17 on Redmi note 3 pro.
Click to expand...
Click to collapse
Send me /data/data/de.robv.android.xposed.installer/log folder
xxxTy3uKxxx said:
Send me /data/data/de.robv.android.xposed.installer/log folder
Click to expand...
Click to collapse
I had the same problem on the same setup. I can't give you log since I restored from nandroid.
Edit: Ok got the log (attached) This seems to be the error: I/Xposed (12220): No such method: protectedMinimumBrightness
xxxTy3uKxxx said:
Send me /data/data/de.robv.android.xposed.installer/log folder
Click to expand...
Click to collapse
Sent you a pm a few hours ago. Still having bootloops with the newest apk you've provided. Not sure if this is related or if it matters but the phone is on manual brightness before installing and activating the module. I've rebooted the phone and right after setting the brightness to automatic, the phone rebooted and went to endless bootloop
It would be great if you resolve this.
http://forum.xda-developers.com/showpost.php?p=54493292&postcount=1
Boot loop on redmi note 3 pro
Rom global 7.1.8.0 ToT
I confirm bootloop on Redmi Note 3 Snapdragon ROM Xiaomi.eu 6.3.31
All who gets bootloop - post xposed logs and /system/framework/services.jar
Thanks
xxxTy3uKxxx said:
All who gets bootloop - post xposed logs and /system/framework/services.jar
Thanks
Click to expand...
Click to collapse
Hi here's my log and services.jar:
https://drive.google.com/file/d/0B4I-78_ylGSHSHVTVzRGczY2SFk/view?usp=docslist_api
New version uploaded to repository. Probably fixed all bootloops.
xxxTy3uKxxx said:
New version uploaded to repository. Probably fixed all bootloops.
Click to expand...
Click to collapse
Installed new version. No more bootloops but I'm now having random restarts. Pm'd you with the logs
chickentuna said:
Installed new version. No more bootloops but I'm now having random restarts.
Click to expand...
Click to collapse
Same here.
extpumajl said:
Same here.
Click to expand...
Click to collapse
Can you post /system/framework/framework-res.apk file? Thanks
xxxTy3uKxxx said:
Can you post /system/framework/framework-res.apk file? Thanks
Click to expand...
Click to collapse
Here you are!
Hello and welcome to my Thread,
I want to share with you the daily driver for my brothr. I'm not a Brain my some other gus here .
Stock+ (HyperStock) is only a factory image based Rom. I cook it with SuperR's Kitchen and I only debloated it, add bootanimation and "steal" ah I mean add some Mods. Even the bootanimation is ripped.
WHY MAGISK?
Becouse my Brother like to play Pokemon GO and Magisk is the easiest way to hide root for some Apps like Pokemon or Snapchat.
Disclaimer:
#ReadMe
We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Features:
lastest OnePlus Image (OxygenOS 3.6.1)
Odex
Magisk v14.3
Busybox 1.27.2
no force encryption
removed dm-verity checks
init.d support
insecure boot image
Marvel VS DC bootanimation
AdAway v3.2
HTC Gallery
HTC Music Player
Xposed Installer
build.prop Tweaks
zipalign APK's
2,4 GHz WiFi improved
enable Miracast
disabled ADB Icon
uncolored Powersafer Mode
headphone volume warning disabled
heavy debloated
system/app/AntHalService*
system/app/BookmarkProvider*
system/app/BTtestmode*
system/app/btmultisim*
system/app/Chrome*
system/app/DMAgent*
system/app/DivesIconPack*
system/app/Drive*
system/app/Duo*
system/app/EngineeringMode*
system/app/EngSpecialTest*
system/app/FaceLock*
system/app/Galaxy4*
system/app/Hangouts*
system/app/HoloSpiralWallpaper*
system/app/LiveWallpapers*
system/app/Maps*
system/app/ModemTestMode*
system/app/Music2*
system/app/NFCTestMode*
system/app/OemAutoTestServer*
system/app/OEMLogKit*
system/app/OPBugReport_Complete*
system/app/OpenWnn*
system/app/OPWallpapers*
system/app/PartnerBookmarksProvider*
system/app/Photos*
system/app/PrintSpooler*
system/app/PhaseBeam*
system/app/RifonIconPack*
system/app/Stk*
system/app/SensorTestTool*
system/app/SwiftKey*
system/app/SwiftKeyFactorySettings*
system/app/talkback*
system/app/Videos*
system/app/WifiRfTestApk*
system/app/YouTube*
system/priv-app/OnePlusGallery*
system/priv-app/OPSimContacts*
system/reserve/Forum*
system/reserve/OPMusic*
system/reserve/SoundRecorder*
system/etc/usb_drivers.iso*
system/etc/recovery-resource.dat*
system/recovery-from-boot.p*
Click to expand...
Click to collapse
Chancelog:
- rebased on OxygenOS 3.6.1
- updated to magisk & magisk manager
- removed gms (Play Service) from Doze Whitelist
- updated Xposed Installer
Click to expand...
Click to collapse
Download:
-> Stock+ OOS 3.6.1
-> OOS 3.6.1 Firmware+Radio
-> LiveWallpaperPicker (<- If you need it)
Installation
From OOS 3.5.X:
- Download the ROM & copy it on your phone
- Do a factory wipe
- Flash the ROM and wait
- Enjoy
From not OOS based roms
-Flash the lastest OOS image
- Follow the intruction from the OOS part
FAQ:
#ReadMe
#1 DPI
if you want to change the dpi you need to flash the Zip from [email protected] ZIP. OxygenOS have some issues with changing the DPI.
#2 Xposed Installer don't work with Magisk Xposed
If you use the Xposed Module from Magisk Manager, you need to use the systemless Xposed Installer from here
if you like the ROM rate it and hit thanks
if you realy like it buy me a kebap
Special Thanks:
- Google
- XDA
- OnePlus
- SupeR
- Chainfire
- osm0sis
- Mentalmuso
- SyCreed
- NevaX1
- dh.harald
- Christian Tailor (for Marvel VS DC GIF)
- B!Gguy
- all I forgot
XDA:DevDB Information
HyperStock OxygenOS , ROM for the OnePlus 2
Contributors
Sh0X31
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OOS 3.5.X
Version Information
Status: Stable
Created 2017-04-17
Last Updated 2017-04-17
I've been looking for something similar.... Will definitely give it a try
Can you change the dpi without problem? In stock is out of place some icons, use 360 ​​dpi:laugh:
Sent from my OnePlus 2 using XDA Labs
hey i just wanna ask that if you have installed exposed frameworks , is pokemon go still playable ??
Zyubi said:
hey i just wanna ask that if you have installed exposed frameworks , is pokemon go still playable ??
Click to expand...
Click to collapse
I don't know, I build the ROM but I have to ask my bro if he use Xposed or not
hpbrasil said:
Can you change the dpi without problem? In stock is out of place some icons, use 360 ​​dpi:laugh:
Sent from my OnePlus 2 using XDA Labs
Click to expand...
Click to collapse
Try it and report
Sh0X31 said:
I don't know, I build the ROM but I have to ask my bro if he use Xposed or not
Try it and report
Click to expand...
Click to collapse
No, the status bar icons are the same ... And the icons in the power off menu are the same, out of place. :crying:
Sent from my OnePlus 2 using XDA Labs
Almost removed every app which was causing android system battery drain:laugh: very excited to flash this one.... Nice job....
Anyway you can make the notification slider have custom settings
Do you mean custom Tiles?
Sh0X31 said:
Do you mean custom Tiles?
Click to expand...
Click to collapse
No I mean the slider button on the left side of the phone
Nice..works great..
Post edited
hpbrasil said:
No, the status bar icons are the same ... And the icons in the power off menu are the same, out of place. :crying:
Sent from my OnePlus 2 using XDA Labs
Click to expand...
Click to collapse
Yeah... this is a crazy weird issue since every build of Oxygen has been able to correctly allow changing of the DPI without any issue. I was discussing this in another thread somewhere far, far away since I don't recall where. But I think it has something to do with a specific frameware file or something to do with the frameware.. it's damn strange that all of a sudden we can't adjust the DPI. I do know a quick-fix-hack is to use an Xposed module that will allow you to change the DPI of specific apps but it still disfigures the whole system if you do it systemwide..
jbarcus81 said:
Yeah... this is a crazy weird issue since every build of Oxygen has been able to correctly allow changing of the DPI without any issue. I was discussing this in another thread somewhere far, far away since I don't recall where. But I think it has something to do with a specific frameware file or something to do with the frameware.. it's damn strange that all of a sudden we can't adjust the DPI. I do know a quick-fix-hack is to use an Xposed module that will allow you to change the DPI of specific apps but it still disfigures the whole system if you do it systemwide..
Click to expand...
Click to collapse
Waiting edition framework :highfive:
Charging speed is very slow unlike oos 3.5.8 it took 4 hours... For 10-100
Cable is new and was working fine with oos 3.5.8... So no problems in hardware part...
Installing this rom will replace TWRP?
Anyone tested ?
hoppingpanda said:
Installing this rom will replace TWRP?
Anyone tested ?
Click to expand...
Click to collapse
No..
mackhenri said:
Nice..works great..
Post edited
Click to expand...
Click to collapse
Significant performance /battery improvement.?
QQRaju said:
Significant performance /battery improvement.?
Click to expand...
Click to collapse
It's snappy compared to stock.. Battery lasts a little longer then stock
Is there any mirror available? I can't download from mega.nz it doesn't seems to work
yousuf.shareef said:
Is there any mirror available? I can't download from mega.nz it doesn't seems to work
Click to expand...
Click to collapse
same for me... there is quota exceeding message.
can somebody add another link?
EDIT: solved by creating free Mega account
Heyo guys ¡¡¡
--> First thing First - provided apps are built by and handled by respected developers mentioned below, purpose of this threat is to provide collection of all diff threads (Mods of Google Camera) in single thread.
> I tried few mods of GC (HDR+,ZSL, Smart Burst) which works with 32Bit stock and custom ROM
1# arm-arm64 with max quality JPEG - ((OK type))
‎
‎2# arm-arm64 with RAW support:- ((better one but colors are saturated on blue side))
‎
‎3# arm-arm64 with max param :- ((not good at all))
‎
‎4# arm-arm64 with Cam2API:- ((ok type))
> For 64Bit custom ROM try arnova's MGC 4.2, 5.0.16 or 5.0.18 those works best try recommended settings if it's provided, this app contains (HDR+, motion pics, ZSL, Smart burst) and arnova's build can be found in second and last link.
‎
--> And lastly for ARstickers there is magisk module ((works only for 64Bit ROM and needs to remove all moded GC before flashing this)) > updated link I prefer using v15E but u can use any of the version u like
http://https://forum.xda-developers.com/essential-phone/themes/magisk-based-gcam-port-ar-sticker-t3730837
Lil description :-
> All this apps are made and handled by other developers mentioned below (and apps can be laggy as this are ported)
> All this camera require is Camera2API enabled -
download any "build prop apk" from play store than add this line
Code:
persist.camera.HAL3.enable=1
Note :- Moto G5S plus supports Cam2API but for some it's not enabled by default so better check it first
All thanks goes to developers who created this modded GC :-
@B-S-G (4PDA)
@ivanich (XDA)
@Arnova8G2 (XDA)
Here are the links for Modded GC :-
--> 81 mods collection of BSG -
https://androidfilehost.com/?w=files&flid=207256
--> XDA forum with Modded GC by BSG , Ivanich and Arnova8G2
https://forum.xda-developers.com/oneplus-3/how-to/modded-google-camera-hdr-60fps-video-t3658552
-- OR --
www.celsoazevedo.com/files/android/google-camera/
So which version is compatible with a stock g5s plus, I tried some and don't even install..
keb00 said:
So which version is compatible with a stock g5s plus, I tried some and don't even install..
Click to expand...
Click to collapse
Only the one which states arm-arm64 as names are supported to Moto g5s+ here is the link for best out of it with almost all Google camera features but make sure u have camera 2api enabled or it won't work
https://androidfilehost.com/?fid=817906626617943326
Mîkòtø said:
Only the one which states arm-arm64 as names are supported to Moto g5s+ here is the link for best out of it with almost all Google camera features but make sure u have camera 2api enabled or it won't work
https://androidfilehost.com/?fid=817906626617943326
Click to expand...
Click to collapse
Thanks in advise, in other post they said our stock system are 32bit, how would work? But I will give a shot!
Edit: Once more, is a version which is know for having suspicious malware https://www.virustotal.com/#/file/1...e6a71ecc3dc8c429431b2eb588eb7f72680/detection
Doesn't exist another version compatible with our moto without this alerts?
keb00 said:
Thanks in advise, in other post they said our stock system are 32bit, how would work? But I will give a shot!
Edit: Once more, is a version which is know for having suspicious malware https://www.virustotal.com/#/file/1...e6a71ecc3dc8c429431b2eb588eb7f72680/detection
Doesn't exist another version compatible with our moto without this alerts?
Click to expand...
Click to collapse
Ah yeah Moto g5s+ got arm32 and the link I provided which says "arm-arm64 = arm32-arm64" also if u wanna check any app which supports arm32 or 64 than use apk extractor or ES File manager to extract app than open extracted folder > lib > if it says armeabi-v7a means that 3bits if it's arm64-v8a than it's 64 bits most of the mods provided and made does supports 64 bits only cause newer Google camera version are mostly for 64bits and it gets easy for developers to Port it to other 64bit device
And as for virus I really don't know about that developers are from diff places and they r the one who are making this mods.......
Mîkòtø said:
Ah yeah Moto g5s+ got arm32 and the link I provided which says "arm-arm64 = arm32-arm64" also if u wanna check any app which supports arm32 or 64 than use apk extractor or ES File manager to extract app than open extracted folder > lib > if it says armeabi-v7a means that 3bits if it's arm64-v8a than it's 64 bits most of the mods provided and made does supports 64 bits only cause newer Google camera version are mostly for 64bits and it gets easy for developers to Port it to other 64bit device
And as for virus I really don't know about that developers are from diff places and they r the one who are making this mods.......
Click to expand...
Click to collapse
Ok thanks for clarifying, I will give a try in some.
Mîkòtø said:
Only the one which states arm-arm64 as names are supported to Moto g5s+ here is the link for best out of it with almost all Google camera features but make sure u have camera 2api enabled or it won't work
https://androidfilehost.com/?fid=817906626617943326
Click to expand...
Click to collapse
What are you using to enable api2?
I tried the persist build prop edit , and still when I try the camera you say to use, I install and it doesn't finish and says "app not installed"
minieod said:
What are you using to enable api2?
I tried the persist build prop edit , and still when I try the camera you say to use, I install and it doesn't finish and says "app not installed"
Click to expand...
Click to collapse
> First check if API2 is enabled by using any camera 2API app from play store if it's enabled
> Than delete any Google camera app staying in ur device some times disabling it won't work u will have to delete it and try again
> also make sure ur trying to install arm32 version of GC and not arm64 (the app which states arm-arm64 are for 32 and 64bits both so it should get installed)
Mîkòtø said:
> First check if API2 is enabled by using any camera 2API app from play store if it's enabled
> Than delete any Google camera app staying in ur device some times disabling it won't work u will have to delete it and try again
> also make sure ur trying to install arm32 version of GC and not arm64 (the app which states arm-arm64 are for 32 and 64bits both so it should get installed)
Click to expand...
Click to collapse
Can you link an app from the play store that would do that? I don't see any ?
I removed the opengapps camera that came with it
I am trying to install the arm-arm64 one you linked
I have persist hal3 on
I'm running aex oreo
Thanks!
Edit; ok found an app to test api2. It says yes. So now, I still can't install the app. I used titanium to uninstall any google camera that was on the phone, but when I try to install the one you suggested for 3.2 it says it tries to upgrade from 4.2 and won't work.
minieod said:
Can you link an app from the play store that would do that? I don't see any ?
I removed the opengapps camera that came with it
I am trying to install the arm-arm64 one you linked
I have persist hal3 on
I'm running aex oreo
Thanks!
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=de.weis.camera2probe
Try this
And u got API 2 enabled since u have hal3 on
XD I also use AEX Oreo and modded GC works for me
Mîkòtø said:
https://play.google.com/store/apps/details?id=de.weis.camera2probe
Try this
And u got API 2 enabled since u have hal3 on
XD I also use AEX Oreo and modded GC works for me
Click to expand...
Click to collapse
Success! It installed and saw through the lens , looked really dark then froze and rebooted. I'll play around more
minieod said:
Success! It installed and saw through the lens , looked really dark then froze and rebooted. I'll play around more
Click to expand...
Click to collapse
first time opening the app will FC 90% of the time but after that it wont FC much often and dont switch btw camera and video to quickly that also causes it to get stuck and make OS reboot i hope B-S-G fix it in his next update
Thx!
In the line for activation hal3, take care that there are no spaces between the =
Otherwise it will not work.
It is worth testing, the pics are a lot better!
XotusBlack said:
Thx!
In the line for activation hal3, take care that there are no spaces between the =
Otherwise it will not work.
It is worth testing, the pics are a lot better!
Click to expand...
Click to collapse
Well the value after = is put in the next column so basically you don't use = sign in the build prop
Remarkable, truly remarkable. This is just so bad I have to comment. Values in build.prop are entered on 1 line, with =, and no spaces. This is the value
persist.camera.HAL3.enabled=1
Phazmos said:
Remarkable, truly remarkable. This is just so bad I have to comment. Values in build.prop are entered on 1 line, with =, and no spaces. This is the value
persist.camera.HAL3.enabled=1
Click to expand...
Click to collapse
Ah just realised it's the matter if which app and how ur using it I have been adding it with 2 column 1st one as name and second one contains value and same app contains second method where I can add new prop in single line using = https://photos.app.goo.gl/YPXHL2oKQVR6HQE33
Mîkòtø said:
Only the one which states arm-arm64 as names are supported to Moto g5s+ here is the link for best out of it with almost all Google camera features but make sure u have camera 2api enabled or it won't work
https://androidfilehost.com/?fid=817906626617943326
Click to expand...
Click to collapse
I'll add that I was having issues finding a camera that worked worth a crap, or at all after flashing validus 16.4. I installed the gcam here and finally have something that works for now. Look forward to improvement for sure.
Edit: absolute thank you for finding this though and making this recommendation.
mrchman said:
I'll add that I was having issues finding a camera that worked worth a crap, or at all after flashing validus 16.4. I installed the gcam here and finally have something that works for now. Look forward to improvement for sure.
Edit: absolute thank you for finding this though and making this recommendation.
Click to expand...
Click to collapse
Open camera in the best till 64 bit - then camera nx
Phazmos said:
Open camera in the best till 64 bit - then camera nx
Click to expand...
Click to collapse
I keep going back and forth on those 2. I'll have to watch which one gives me more consistent results before I delete the other. Even the open camera encountered a fatal error while testing it once. Nbd tho.
mrchman said:
I keep going back and forth on those 2. I'll have to watch which one gives me more consistent results before I delete the other. Even the open camera encountered a fatal error while testing it once. Nbd tho.
Click to expand...
Click to collapse
Testing faze of Pixel experience is out (64Bit ROM) and arnova's GC 5.1.018 and 5.1.016 works best except video recording doesn't work, pics quality is lot better then stock camera even better than GC for 32bit motion photos works with some tweaks causes some FC but over all I kind of like 5.1 more than any of GC for 32Bits
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
crazymika said:
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
Click to expand...
Click to collapse
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
tombbb said:
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
Click to expand...
Click to collapse
I don't think so, it's NFC chip specified so if you have a different device it's xml config would be different.
For m9 you could look through it's stock rom to adjust configuration, I believe the M9 stock ROM support NFC-SIM card.
What does nfc sim means?
prasant737 said:
What does nfc sim means?
Click to expand...
Click to collapse
In some places we have our payment/transportation card integrated in SIM card.
so we can use our phone to pay/take public transportation.
hi sir able to update it for oneplus 6t android pie?
laocheebye said:
hi sir able to update it for oneplus 6t android pie?
Click to expand...
Click to collapse
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
crazymika said:
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
Click to expand...
Click to collapse
i am singaporean actually. can u link me the thread? i can read chinese so its fine. thank you deep deep.
---------- Post added at 02:27 PM ---------- Previous post was at 02:12 PM ----------
i found the thread and the download link if anyone is interested to try for oneplus 6 or 6t.
forum link in chinese
flashable zip
i havent tried cos there is no decrypt twrp for 6t yet so at your own risk people.
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
NoobZik said:
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
Click to expand...
Click to collapse
I'll update this to pie compatible when oos pie released
crazymika said:
I'll update this to pie compatible when oos pie released
Click to expand...
Click to collapse
Hello, any news ?
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
jekyll530 said:
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
Click to expand...
Click to collapse
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
crazymika said:
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
Click to expand...
Click to collapse
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Cuvillier said:
Hello, any news ?
Click to expand...
Click to collapse
I've update to Pie rom, and confirm that we still can use sim NFC at it, just need some path adjustments, use the attached zip file replace your system/vendor/etc/libnfc-nxp.conf, put the SmartcardService folder in system/priv-app folder
add this line "persist.nfc.smartcard.config=SIM1,eSE1" in system/build.prop file, and should work as before.
I forgot how to make it into proper Magisk Module~the module i made tonight can't not be installed.... so strange. I'll update once i get it to work.
P.S.
I tried custom ROMs, they have many differences about NFC config, I can not get it to work even replace the framework and permission file, tried everything I know but still failed, maybe they missed something at more lower level.
updated for OOS Pie
I just found what's wrong.
Here's the updated Module for OOS Pie.
Later i'll update to Modules-Repo
jekyll530 said:
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Click to expand...
Click to collapse
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
The OP5/T module is not available via Magisk download now. I'm currently using OP5 and will buy a 7 Pro. If you need, I can help testing.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
thanks but it doesn't work on lineage os 16. in logcat i get keymaster operation failed and unsupported digest on km1 hal issue. i hope you can fix it
regards
If you want some action instead of your old boring Bootanimation I invite you to try this!
The Best Bootanimation for POCO and all devices.
- New startup sound (Replaced the New MIUI 12.5 Sound)
- Can use it on all android phones
- Perfect to use in Xiaomi / Redmi /POCO
Each one takes so long time to be done so please press the Thanks button You're free to share it anywhere you want just keep my name as a credit.
Installation:
- Download the file
- Add it like any Magisk module
- If you don't have Magisk extract the files and replace them manually
- Restart and enjoy!
Download:
Cyberpunk V3 Download | Preview
POCO Snapdragon 865+ Download | Preview
POCO Snapdragon 865+ (Short) Download | Preview
Iron Man POCO Download | Preview
Congratulations, it was really good .
Where should I place the extracted files manually, in what mass should I replace?
Roger Carvalho said:
Congratulations, it was really good .
Where should I place the extracted files manually, in what mass should I replace?
Click to expand...
Click to collapse
Thanks Bro
For MIUI : System/Media
Don't forget to set the permissions if you didn't do that before try to google it before you do anything
mouhannadsukkar said:
Thanks Bro
For MIUI : System/Media
Don't forget to set the permissions if you didn't do that before try to google it before you do anything
Click to expand...
Click to collapse
I realized that the animation doesn't load completely until the end, it stops before the POCO logo appears
Roger Carvalho said:
I realized that the animation doesn't load completely until the end, it stops before the POCO logo appears
Click to expand...
Click to collapse
Use the short version
And how to install on POCO F2 Pro ?
mgreta36 said:
And how to install on POCO F2 Pro ?
Click to expand...
Click to collapse
Yes, 8GB RAM, 256 ROM
mgreta36 said:
And how to install on POCO F2 Pro ?
Click to expand...
Click to collapse
Ä° mentioned that in the post
@mouhannadsukkar Unfortunatelly it is not possible to implement with out root. Is it possible to do it as a mtz file to flash it as a theme?
zoltan78 said:
@mouhannadsukkar Unfortunatelly it is not possible to implement with out root. Is it possible to do it as a mtz file to flash it as a theme?
Click to expand...
Click to collapse
No
...as module Magisk - does not work
MIUI 12.5 by xiaomi.eu, 21.1.28, Magisk 21.4...
It working. Follow the instructions
short version if on full display. the normal is not.
tze_vitamin said:
It working. Follow the instructions
Click to expand...
Click to collapse
I have that too - but at startup I have the old bootanimation
tze_vitamin said:
It working. Follow the instructions
Click to expand...
Click to collapse
tze_vitamin said:
short version if on full display. the normal is not.
Click to expand...
Click to collapse
I'll fix that later
New Cyberpunk V3 with sound!
Download | Preview
Iron Man POCO Download | Preview
mouhannadsukkar said:
New Cyberpunk V3 with sound!
View attachment 5211799Download | Preview
Click to expand...
Click to collapse
This is wonderful....
EDIT: It's already been resolved.
Spoiler: Nevermind
@mouhannadsukkar
I tried POCO Snapdragon 865+ (Short) and Iron Man POCO and it worked wonders!
So I wanted to create a bootanimation by myself but for some reason no images are being displayed as it goes black with sound on boot and I can't figure out why.
I followed the Tutorial, added it as a Magisk module without errors (I used one of your zips as baze) and revised several times both the Tutorial and one of your bootanimation.zip, but I can't figure out where I'm failing.
I also used the Boot Animation Factory tool, which is able to preview without any problems, but still remains black on boot.
I don't know if there is any size limit for bootanimation.zip, as mine is around 320MB.
I don't know if it's relevant, but I'm using Xiaomi.eu ROM 22.1.13 (Android 12 with MIUI 13).
I would appreciate if you could give me some guidance, as I am at a dead end right now.