Related
Most of the device makers, install their own apps to market themselves which makes the device slower sometimes. The bloatware is a huge threat to the AOSP Android and should put to an end at some or the other point. Rooting a device and uninstalling all the bloatware will usually do the trick but will not remove the lag entirely, but thanks to the developers we have many scripts that optimize the device performance and offers great performance boost to the devices. Today I am going to show you one such script which gives a spike in your device’s performance.
The ShivaY Script to improve the Android Device performance by adding many performance scripts together. The best aspect of this script is that, you need not use any commands to run the performance scripts once launched which is actually a great deal than expected. The ShivaY aims at reducing the performance lags in the device without impacting the battery life. The ShivaY tweak is slim and sleek with accurately targeted to reduce the lag with the entropy engine and other scripts, gaming performance is another add on to it.
The ShivaY script lists the following features for your pretty device:
Super Fast Performance
Best battery Life
Custom Entropy Engine
Superb Gaming Performance
Awesome Responsiveness
Super Slim & not messy like other scripts just Flash & enjoy
No command needed
This tweak is compatible with almost all device running either stock AOSP ROM or an custom ROM, so you won’t need to bother about its compatibility. Battery life is also expected to be improved with the ShivaY script as the entropy engines reduces the lag in the device which results in low RAM utilization that results in an improved battery life. Installing this tweak is very simple and all you have to do is to grab the Zip file from the below download link and flash it via any custom recovery on your device.
Link : Shiva/s/8yp0ae2wulhly4g/ProjectShivaY.zip?dl=0
Just Remove Shiva and Type Dropbox.com in Link
How To Install:
boot into TWRP Recovery on your device using any 3rd party app or the hardware combinations.
In TWRP menu, select Install which will take you to an inbuilt file manager.
Select the zip file using the file manager.
Once selecting the Zip, the recovery will ask for the confirmation. Swipe to confirm the flash.
After the Zip is flashed,
you’ll get the option to reboot the device or get back to the main menu.
Select Reboot System if your task is accomplished.
how it’s working on your device ?? Please Comment Below
Bro there are 2 zips
One u give in link
And other in last
simar286 said:
Bro there are 2 zips
One u give in link
And other in last
Click to expand...
Click to collapse
Both Are one zip file
you can download from the link or for alternate, from the attached file.
Bro thanks it works for me....reduce lag
simar286 said:
Bro thanks it works for me....reduce lag
Click to expand...
Click to collapse
Thank You so much for using this :laugh:
Can You tell me on which device u flashed ?
Press Thanks Button If I Helped
it will appreciate my work.
On j700f :good:
Hello guys,
Been lurking here for ages and already benefited tons from the help posted here. However, this is one issue that I can't seem to figure out.
I have the MTK variant of the RN4 and I'm trying to enable the Camera2 API so that I can take RAW pictures, use Google HDR+ etc.
I am rooted on MIUI 9 (though as it's MTK, it is still Android 6.0) and I edited the build.prop file using ES Explorer (I added the persist.camera.HAL3.enabled=1 line). I've rebooted the device, used checker apps and Lightroom to check if there's RAW support, but without luck.
Do you guys have any other ideas as to how I can enable Camera2 API support?
I don't have bootloops, I don't have any issues other than the fact that there's no Camera2 API support. Restarting the device does not erase my mods to the build.prop file.
Any help is appreciated!
Forget about it since GCam is supposed to work on Snapdragon devices only.
Kavute said:
Forget about it since GCam is supposed to work on Snapdragon devices only.
Click to expand...
Click to collapse
I wouldn't mind using other apps such as Lightroom if I can get RAW to work. Any ideas as to whether that's possible?
I've had a similar problem before, but MIUI would revert my changes to the build.prop. I solved it by using a systemless root via Magisk.
What I did:
1. Unroot your phone
2. Flash Magisk using TWRP (link to Magisk thread).
3. Download the "camera2api-enabler.zip" from this thread
4. Add the zip (Module) using the Magisk Manager app that comes installed after you flash Magisk
5. Reboot, and you should see the camera2api enabled.
If you do run into a boot loop after installing Magisk, you may need to flash the LazyFlasher zip file after Step 2.
yohyah said:
I've had a similar problem before, but MIUI would revert my changes to the build.prop. I solved it by using a systemless root via Magisk.
What I did:
1. Unroot your phone
2. Flash Magisk using TWRP (link to Magisk thread).
3. Download the "camera2api-enabler.zip" from this thread
4. Add the zip (Module) using the Magisk Manager app that comes installed after you flash Magisk
5. Reboot, and you should see the camera2api enabled.
If you do run into a boot loop after installing Magisk, you may need to flash the LazyFlasher zip file after Step 2.
Click to expand...
Click to collapse
Thank you! I'll look into Magisk. I have to admit that I'm tempted if only to get this and Super Mario Run working.
But I do like having sys root access, I've just fixed the Cell Standby battery drain with an edit to the build.prop file, as MIUI 9 doesn't have the option to disable VoLTE.
So I'll give it a thought.
Thank you! and if anyone has any other tips, preferably something that doesn't alter my setup too much, it'd be ace.
rottensong said:
Thank you! I'll look into Magisk. I have to admit that I'm tempted if only to get this and Super Mario Run working.
But I do like having sys root access, I've just fixed the Cell Standby battery drain with an edit to the build.prop file, as MIUI 9 doesn't have the option to disable VoLTE.
So I'll give it a thought.
Thank you! and if anyone has any other tips, preferably something that doesn't alter my setup too much, it'd be ace.
Click to expand...
Click to collapse
Hi!
If it isn't work, you should try out this:
Go in Engineer mode https://forum.xda-developers.com/showthread.php?t=2313812 or download the Engineer mod apk from play store. (It's working just on stock ROM)
Swipe left to Hardware testing, and there will be the Camera option.
I think, after you find this, you can get through the settings (where will be a raw capture option)
Hi, I am the author of VirtualXposed: https://forum.xda-developers.com/xposed/virtualxposed-xposed-root-unlock-t3760313
VirtualXposed can run some Xposed modules on Non-Root devices without needing to unlock the bootloader or flash any sysytem images, but it can not act on system processes.
After a lot of exploration and experiment, I found a better way to run (Xposed) modules. It can run on both root and non-root devices, and it support Android 5.0 ~ 10.0 I release the beta version in China at 2019/1/5, after many tests and improvements, it is stable enough now to introduce it for you.
The app, or framework is named TaiChi
## Introduction
TaiChi is a framework to use Xposed module with or without Root/Unlock bootloader, it support Android 5.0 ~ 9.0.
In simple words, TaiChi is Xposed-Styled Framework, it can load Xposed modules, do hooks and so on.
## Feature
TaiChi is Xposed-Styled, but it has no relation with Xposed. The only relevance is that TaiChi can load Xposed modules, the implementation of TaiChi and Xposed Framework is very different.
Here are some features of Taichi:
1. TaiChi has fully supports for Android Pie.
2. TaiChi can run in non-root mode.
3. TaiChi does not effect the android system and it does not hook all apps in system. Only the apps you want to apply Xposed modules are hooked. Other apps in system run in a completely clean environment, which means TaiChi can pass SafeNet easily.
4. TaiChi doesn't need to reboot system in most cases
5. TaiChi is hard to detect. TaiChi doesn't modify the libart and app_process, it has nearly no noticeable characteristics.
## Usage
TaiChi has two work mode: magisk mode and non-root mode. If you don't want to unlock the bootloader/flash system images, you can use the non-root mode, if you prefer more powerful functions, just try magisk mode.
### What is the different with magisk mode and non-root mode?
The only difference is that magisk mode can hook system process, so more modules are supported, such as Xposed Edge/Greenify.But magisk mode need to unlock the bootloader and install Magisk, while non-root mode just needs to install a simple app.
### Non-Root mode
TaiChi run in non-root mode in genernal, just install a simple app, all the installation is over. If you want to use Xposed modules, for example, you'd like to use SnapFreedom on SnapChat, follow these steps:
1. Click the float button in Home page of TaiChi, and then click the button : **Create App**.
2. Select the app you'd like to apply Xposed modules, such as SnapChat.
3. Click the "Create" button at the bottom and then wait the creation to finish pariently.
4. When creation finished, TaiChi tells you that you need to unstall the original SnapChat, please uninstall it, this is necessary. Because TaiChi in non-root mode needs to modify the APK file which means we have to re-sign the APK.
5. Follow the steps in TaiChi app until you installed the new app.
6. Enter the **Module Manage** activity by click the button "Module Manager" of the float button in Home page.
7. Check the SnapFreedom module.
8. Kill the process of SnapChat and the Xposed modules should work properly.(You don't need to reboot system)
### Magisk mode
Non-root mode of TaiChi has some shortcomming even though it do not need to unlock bootloader, so i develop a magisk module, this module can give TaiChi extra power to overcome these shortcommings:
1. magisk mode can hook into system process.
2. magisk mode don't need to modify the apk, and the signature keeps same.
When you flashed the [magisk module]https://github.com/tiann/TaiChi-Magisk provided by TaiChi, TaiChi app switch to magisk mode automaticly: TaiChi App + magisk module = TaiChi·Magisk. When the magisk module is disabled or removed, TaiChi app turn to non-root mode.
If you want to use magisk mode, please read the [wiki](https://github.com/tiann/Tai-Chi/wiki/taichi-magisk-beta) carefully.
## For Developers
TaiChi is a Framework, developers can wrote modules to do hooks. The TaiChi modules is fully compatible to Xposed modules, so just wrote the Xposed-Styled modules and it can run well in TaiChi, too.
But there are still some difference from TaiChi Framework and Xposed Framework, please refer [For Xposed Developers]https://github.com/tiann/Tai-Chi/wiki/For-Xposed-developer
## Discuss
- [Telegram Group](https://t.me/vxp_group)
## Contact me
(mailto:[email protected])
[B]## Other [/B]
1. TaiChi is closed-source now, it may be open-sourced in the future, but not now.
2. TaiChi can not run Xposed modules arbitrarily(it supports it in technical-speaking), it can only run specific version and specific modules now. If you want to use other modules, please fire an issue. Here is the support list: https://taichi.cool/module/module.html
3. TaiChi is compatible to Xposed modules, but it may have its own module in the future.
[B][U][SIZE="4"][PLAIN]XDAevDB Information[/PLAIN][/SIZE][/U][/B]
[SIZE=3][B]TaiChi, Xposed for all devices (see above for details)[/B][/SIZE]
[B][U]Contributors[/U][/B]
[URL="https://forum.xda-developers.com/member.php?u=8994560"]weishu[/URL], [URL="https://forum.xda-developers.com/member.php?u=8994560"]weishu[/URL]
[B]Source Code:[/B] [URL="https://github.com/taichi-framework"]https://github.com/taichi-framework[/URL]
[B]Xposed Package Name:[/B]
[B][U]Version Information[/U][/B]
[B]Status:[/B] Stable
[B]Created[/B] 2019-03-11
[B]Last Updated[/B] 2019-03-16
I noticed the magisk module today on the repo. Sounds very promising and... tempting to me.
But, regardless of how much I'd love to finally have xposed modules on pie, there's one major deal-breaker here: Closed source.
TaiChi magisk (as well as xposed) are extremely mighty - which makes it mandatory for us to see and confirm what's happening behind the curtains.
As soon as it gets open source, I'll be back and support this project.
Sent from my OnePlus 6 using XDA Labs
weishu said:
TaiChi run in non-root mode in genernal, just install a simple app, all the installation is over. If you want to use Xposed modules, for example, you'd like to use SnapFreedom on SnapChat, follow these steps:
1. Click the float button in Home page of TaiChi, and then click the button : **Create App**.
2. Select the app you'd like to apply Xposed modules, such as SnapChat.
3. Click the "Create" button at the bottom and then wait the creation to finish pariently.
4. When creation finished, TaiChi tells you that you need to unstall the original SnapChat, please uninstall it, this is necessary. Because TaiChi in non-root mode needs to modify the APK file which means we have to re-sign the APK.
5. Follow the steps in TaiChi app until you installed the new app.
6. Enter the **Module Manage** activity by click the button "Module Manager" of the float button in Home page.
7. Check the SnapFreedom module.
8. Kill the process of SnapChat and the Xposed modules should work properly.(You don't need to reboot system)
Click to expand...
Click to collapse
Thanks for this great module, its nice to know there is hope for our locked bootloader devices.
I want to use snapfreedom, but the above steps wont actually work, snapchat will refuse to log me in since the signature of the apk has changed and its been uninstalled so my data is gone. Without root access I can't figure a way to copy my user data over to remain logged in. Any ideas would be greatly appreciated!
flamery said:
Thanks for this great module, its nice to know there is hope for our locked bootloader devices.
I want to use snapfreedom, but the above steps wont actually work, snapchat will refuse to log me in since the signature of the apk has changed and its been uninstalled so my data is gone. Without root access I can't figure a way to copy my user data over to remain logged in. Any ideas would be greatly appreciated!
Click to expand...
Click to collapse
The SnapChat itself refused you to login or other app can not login by Snapchat?
In fact, TaiChi non-root mode cheats the signature of app, if it cannot cheats SnapChat, i will look into it.
Depressed T.Bear said:
I noticed the magisk module today on the repo. Sounds very promising and... tempting to me.
But, regardless of how much I'd love to finally have xposed modules on pie, there's one major deal-breaker here: Closed source.
TaiChi magisk (as well as xposed) are extremely mighty - which makes it mandatory for us to see and confirm what's happening behind the curtains.
As soon as it gets open source, I'll be back and support this project.
Sent from my OnePlus 6 using XDA Labs
Click to expand...
Click to collapse
In fact, I’ve been tangled for a long time whether to open source the TaiChi.
Whether it's TaiChi or Xposed-Framework, they are so powerful that it's hard to believe its security if it's not open source. But there are some reasons for me to not open source it now:
1. TaiChi is a framework, it gives the same power to modules, modules can do all that TaiChi can do. In magisk-mode, TaiChi can control your device completely(Although I didn't do that), so dose the modules. If TaiChi is open-source but some modules don't, it is not secure too. You can choose to use only open-source modules, but others may not. There are so many excellent modules are closed-source, such as Greenify, Xposed Edge, Snapchat, etc. Only open source TaiChi is far from security if some module developer are malicious.
2. Open source doesn't mean security. VirtualXposed is open-source: https://github.com/android-hacker/VirtualXposed . But if you read the XDA Thread of it: https://forum.xda-developers.com/xpo...nlock-t3760313 . There are still so many users thinks it is not safe to use
Depressed T.Bear said:
I noticed the magisk module today on the repo. Sounds very promising and... tempting to me.
But, regardless of how much I'd love to finally have xposed modules on pie, there's one major deal-breaker here: Closed source.
TaiChi magisk (as well as xposed) are extremely mighty - which makes it mandatory for us to see and confirm what's happening behind the curtains.
As soon as it gets open source, I'll be back and support this project.
Sent from my OnePlus 6 using XDA Labs
Click to expand...
Click to collapse
In fact, I’ve been tangled for a long time whether to open source the TaiChi.
Whether it's TaiChi or Xposed-Framework, they are so powerful that it's hard to believe its security if it's not open source. But there are some reasons for me to not open source it now:
1. TaiChi is a framework, it gives the same power to modules, modules can do all that TaiChi can do. In magisk-mode, TaiChi can control your device completely(Although I didn't do that), so dose the modules. If TaiChi is open-source but some modules don't, it is not secure too. You can choose to use only open-source modules, but others may not. There are so many excellent modules are closed-source, such as Greenify, Xposed Edge, Snapchat, etc. Only open source TaiChi is far from security if some module developer are malicious.
2. Open source doesn't mean security. VirtualXposed is open-source: https://github.com/android-hacker/VirtualXposed . But if you read the XDA Thread of it: https://forum.xda-developers.com/xpo...nlock-t3760313 . There are still so many users thinks it is not safe to use.
Depressed T.Bear said:
I noticed the magisk module today on the repo. Sounds very promising and... tempting to me.
But, regardless of how much I'd love to finally have xposed modules on pie, there's one major deal-breaker here: Closed source.
TaiChi magisk (as well as xposed) are extremely mighty - which makes it mandatory for us to see and confirm what's happening behind the curtains.
As soon as it gets open source, I'll be back and support this project.
Sent from my OnePlus 6 using XDA Labs
Click to expand...
Click to collapse
In fact, I’ve been tangled for a long time whether to open source the TaiChi.
Whether it's TaiChi or Xposed-Framework, they are so powerful that it's hard to believe its security if it's not open source. But there are some reasons for me to not open source it now:
1. TaiChi is a framework, it gives the same power to modules, modules can do all that TaiChi can do. In magisk-mode, TaiChi can control your device completely(Although I didn't do that), so dose the modules. If TaiChi is open-source but some modules don't, it is not secure too. You can choose to use only open-source modules, but others may not. There are so many excellent modules are closed-source, such as Greenify, Xposed Edge, Snapchat, etc. Only open source TaiChi is far from security if some module developer are malicious.
2. Open source doesn't mean security. VirtualXposed is open-source: https://github.com/android-hacker/VirtualXposed . But if you read the XDA Thread of it: https://forum.xda-developers.com/xpo...nlock-t3760313 . There are still so many users thinks it is not safe to use. When it is closed-source, users think it is insecure becuase it is not open-source, when you open source it, users think it is insecure becuase no one to review the huge and ****-source code.
3. Xposed-Framework is not open-source after Android O, too. (correct me if i am wrong)
4. Closed-source can provide security for normal users. Closed source means that TaiChi can restrict the ****ing and harmful modules run in TaiChi(it won't load unknown modules). And also, The module developer won't worry about crack( it won't load the re-signed modules).
Happy to hear from all your advices.
weishu said:
In fact, I’ve been tangled for a long time whether to open source the TaiChi.
Whether it's TaiChi or Xposed-Framework, they are so powerful that it's hard to believe its security if it's not open source. But there are some reasons for me to not open source it now:
1. TaiChi is a framework, it gives the same power to modules, modules can do all that TaiChi can do. In magisk-mode, TaiChi can control your device completely(Although I didn't do that), so dose the modules. If TaiChi is open-source but some modules don't, it is not secure too. You can choose to use only open-source modules, but others may not. There are so many excellent modules are closed-source, such as Greenify, Xposed Edge, Snapchat, etc. Only open source TaiChi is far from security if some module developer are malicious.
2. Open source doesn't mean security. VirtualXposed is open-source: https://github.com/android-hacker/VirtualXposed . But if you read the XDA Thread of it: https://forum.xda-developers.com/xpo...nlock-t3760313 . There are still so many users thinks it is not safe to use
Click to expand...
Click to collapse
I think it is a pretty weak reasoning to not make the framework open source because the modules are closed source.
Both open and closed source do not mean security, so this is not a real argument either.
So, it lets me just wondering what the real reason is to not open source.
weishu said:
The SnapChat itself refused you to login or other app can not login by Snapchat?
In fact, TaiChi non-root mode cheats the signature of app, if it cannot cheats SnapChat, i will look into it.
Click to expand...
Click to collapse
Its the login to snapchat, they have very high security around 3rd party apps and app modding. If the apk has been modified you get the "login has temporarily failed" message when trying to login.
The workaround in the past has been to login with xposed disabled, titanium backup data, flash xposed, then restore data so you remain logged in. But there is no way to achieve that without root that I can see! thanks for looking into it!
so how do i enable the Magisk module?
Just tried Taichi today and it instantly bring the good old days for me with Xposed. I need to have certain Apps to run in different locale and Xposed module is to the only way to get this done! However Xposed also stopped Google pay so I have to stop using Xposed ever since.
With Taichi I can start use Xposed again and have Google Pay at the same time... Great solution!
Unfortunately with current international politics it immediately mark anything from China as insecure. I am not sure if TaiChi is secure or not, but I guess since the day I rooted my phone I am assuming all the risk inherited.
Anyway good work! Weishu! (Just donated)
Hmm I must be high on something because I dont see the download link.
woomera said:
Hmm I must be high on something because I dont see the download link.
Click to expand...
Click to collapse
Check the magisk manager downloads section.
@weishu , I hope you can help. I've purchased xprivacylua pro from the google play store some time ago and reinstalled it on Pie. Xprivacylua pro does not seem to recognize xprivacylua is installed also. Do you have any suggestions?
dirtyreturn said:
@weishu , I hope you can help. I've purchased xprivacylua pro from the google play store some time ago and reinstalled it on Pie. Xprivacylua pro does not seem to recognize xprivacylua is installed also. Do you have any suggestions?
Click to expand...
Click to collapse
It sounds like you misunderstood something. The "Pro" app from. Google Play is just a companion app, which enables the pro features you bought. It doesn't contain the actual xposed module (and app) of xprivacy Lua.
Simply download it through the xposed repo or get the latest apk directly from the xprivacy lua website.
Sent from my OnePlus 6 using XDA Labs
Depressed T.Bear said:
It sounds like you misunderstood something. The "Pro" app from. Google Play is just a companion app, which enables the pro features you bought. It doesn't contain the actual xposed module (and app) of xprivacy Lua.
Simply download it through the xposed repo or get the latest apk directly from the xprivacy lua website.
Click to expand...
Click to collapse
Thanks for the reply. I just assumed by my post it would make sense.
I do have the taichi magisk module installed, and from there I've installed xprivacylua. And from the google play store the pro companion app. @Depressed T.Bear - are you using xprivacylua on Pie? Does the pro app recognize the main app as installed for you?
Depressed T.Bear said:
It sounds like you misunderstood something. The "Pro" app from. Google Play is just a companion app, which enables the pro features you bought. It doesn't contain the actual xposed module (and app) of xprivacy Lua.
Simply download it through the xposed repo or get the latest apk directly from the xprivacy lua website.
Click to expand...
Click to collapse
Please see screenshots.
dirtyreturn said:
Thanks for the reply. I just assumed by my post it would make sense.
I do have the taichi magisk module installed, and from there I've installed xprivacylua. And from the google play store the pro companion app. @Depressed T.Bear - are you using xprivacylua on Pie? Does the pro app recognize the main app as installed for you?
Click to expand...
Click to collapse
Then it might be due to TaiChi.
Yes, I'm using XPrivacyLua on Pie - but with EdExposed and not with TaiChi. For one simple reason: TaiChi is not open source! EdExposed and RiruCore instead are.
So it would be absolute nonsense to use an app like XPrivacyLua to protect your privacy, while using a xposed version with is closed-source and nobody can tell what it actually does.
So, I can't help you with TaiChi. Only the developer can.
All I can say is that it works flawlessly with EdExposed.
Sent from my OnePlus 6 using XDA Labs
I have edxposed but I'm thinking of trying Taichi out to see if it's more stable. Will this work with modules such as xposed edge where the module doesnt target a specific app?
Soumy1234 said:
I have edxposed but I'm thinking of trying Taichi out to see if it's more stable. Will this work with modules such as xposed edge where the module doesnt target a specific app?
Click to expand...
Click to collapse
Your question is answered clearly in the first post
Sent from my OnePlus 6 using XDA Labs
A lot of people have complained about stuttering in between App switching and gaming. This guide helps you disable Dynamic refresh rate through MagiskHide Prop Config, which is easier than setting it manually and safer to disable if it doesn't work.
Disclaimer: Disabling Dfps (Dynamic refresh rate) will degrade battery life with prolonged use. According to my personal testing, battery life (SOT) decreased by 10-18% on average. Only use for short periods of time.
Click to expand...
Click to collapse
Requirements:
- Unlocked and rooted with Magisk v21.0.
- busybox-ndk.
- MagiskHide Prop Config installed (used often to pass safetynet CTS but can be used to set custom Props).
Instructions:
1- Run SU in your terminal of choosing.
2- Run props.
3- choose option 5 "Add/edit custom props".
4- choose n "New custom prop".
5- type in:
Code:
ro.vendor.dfps.enable
6- Default value should be true, type in false to disable.
7- choose 2 "post-fs-data".
8- choose n, don't reboot yet.
9- choose n again to set another prop.
10- type in:
Code:
ro.vendor.smart_dfps.enable
11- Default value should be true, type in false to disable.
12- choose 2 "post-fs-data".
13- Reboot.
Only tested on stock MIUI. Try at your own risk!
It works on MIUI eu 12.0.3.0.
No stuttering anymore !
Thanks man !
Do this affect to battery performance?
Segamalaga said:
Do this affect to battery performance?
Click to expand...
Click to collapse
Yes. For me i get 1 hour less of SOT. That means if i get 7-9 hours on average, with this mod i get 6-8 hours instead.
Doesn't this mess with L1 ? Damn , I need to back up my persist img
Joakin2k said:
Doesn't this mess with L1 ? Damn , I need to back up my persist img
Click to expand...
Click to collapse
NOPE. It doesn't mess with L1 certification or any for that matter. This is a systemless "vendor" modification not "persist", and as such very easily uninstallable. See attached screenshots.
Also the payoff/difference is huge if you're a power user. Try consistent 120Hz vs. stuttering 120Hz (sometimes drops to 30Hz) and you will notice immediately.
Slim K said:
NOPE. It doesn't mess with L1 certification or any for that matter. This is a systemless "vendor" modification not "persist", and as such very easily uninstallable. See attached screenshots.
Also the payoff/difference is huge if you're a power user. Try consistent 120Hz vs. stuttering 120Hz (sometimes drops to 30Hz) and you will notice immediately.
Click to expand...
Click to collapse
Excellent explanation ! , I don't care for battery (if is not something out of control) I charge my phone always twice a day, I read that even Xiaomi EU and MIUI MIX has this issue ...
Going back to stock or EU for performance, aosp based are very green in performance...
Any Rom recommendation ?
Is there a way to set the refresh rate to 90hz and disable the dynamic refresh rate after that?
Joakin2k said:
Any Rom recommendation ?
Click to expand...
Click to collapse
I've tried all the custom ROMs available for our device and recommend stock for now. Since all of them are based on stock kernel anyway, they're all MIUI ROMs in my opinion, but you can't blame devs for choosing to patch Stock MIUI when we don't even have Device sources released. TWRP for the same reason, Dynamic partitions are scary.
Skeuomorphic said:
Is there a way to set the refresh rate to 90hz and disable the dynamic refresh rate after that?
Click to expand...
Click to collapse
As far as i know, refresh rate is handeled by an Activity:
Code:
com.xiaomi.misettings/.display.RefreshRate.RefreshRateActivity
which handels Dfps. In turn Dfps handels the frequencies in between 30Hz-120Hz depending on the process(Activity) on the forground.
I can't use my pc for a week atleast (broken from tinkering too much) to find a workaround, but good news! Theoretically, this guide should also work in custom roms with 90Hz option in settings app. Try it on a custom ROM and share your experience with us. [at your own risk ofc]
Thanks for taking your time to answer sir
Will this still work if i set the display to 60hz?
I'm having problems hiding magisk manager(no magisk hide), I already turn off dynamic hz thx to you , changed device fingerprint for pixel 4(want certification)... But when I want to hide magidk manager (a Bank app can see it -already marked in hide-) it says some error , I don't know if it's the Miui security app , this never happened on AOSP, I'm on stock poco X3 , root + props hide config + vanced ... Any tip ?
olujnap316 said:
Will this still work if i set the display to 60hz?
Click to expand...
Click to collapse
Yes. Setting 60Hz in the Settings app will set it to a constant 60Hz, conversely setting it to 120Hz will set it to a constant 120Hz as well.
Joakin2k said:
I'm having problems hiding magisk manager(no magisk hide), I already turn off dynamic hz thx to you , changed device fingerprint for pixel 4(want certification)... But when I want to hide magidk manager (a Bank app can see it -already marked in hide-) it says some error , I don't know if it's the Miui security app , this never happened on AOSP, I'm on stock poco X3 , root + props hide config + vanced ... Any tip ?
Click to expand...
Click to collapse
This is a fairly famous problem with Magisk Manger hiding and SELinux enforcing, but easily solvable. Do the following:
1- Go to Play store and turnoff Play Protect scanning (interferes with magisk manager repackiging itself aka Hiding).
2- Force stop Manager.
3- Open Manager again and choose another name and apply.
4- Profit.
If this still doesn't work, try this:
5- Go back to step 2 and then open terminal.
6- Type SU.
7- then set SELinux to permissive by inputting:
Code:
setenforce 0
8- continue with step 3
9- then set SELinux back to enforcing by inputting in terminal:
Code:
setenforce 1
10- Done
Man... Worked Flawlessly... Never had that issue on AOSP roms.
Thanks ! no need to turn on/off selinux enforcement.
But , really, thanks for your attention and detail , I'm impressed Sr
To make things easier and more risk free, i have attached a config file to automate this process. New steps are even easier! Do the following:
1- Install the aforementioned modules.
2- unzip the attached .zip file to the root of internal storage.
3- Reboot.
New settings should've been applied successfully after reboot and the config file will delete itself.
Slim K said:
To make things easier and more risk free, i have attached a config file to automate this process. New steps are even easier! Do the following:
1- Install the aforementioned modules.
2- unzip the attached .zip file to the root of internal storage.
3- Reboot.
New settings should've been applied successfully after reboot and the config file will delete itself.
Click to expand...
Click to collapse
Does this mean that the manual method enables back the dynamic refresh rate after every reboot? Which this conf will solve by placing the conf file at the root of internal storage before rebooting the phone?
Skeuomorphic said:
Does this mean that the manual method enables back the dynamic refresh rate after every reboot? Which this conf will solve by placing the conf file at the root of internal storage before rebooting the phone?
Click to expand...
Click to collapse
The Manual method as well as this method both persist through reboots. Only difference is the complexity of the initial setup, but that's it.
Great tutorial.any good guide to debloat safely without root
Doesn't seem to work there, checked with the power monitor, and it still switch between 120/90/60/30/1 fps depending on the app/menu I'm in
CaPicote said:
Doesn't seem to work there, checked with the power monitor, and it still switch between 120/90/60/30/1 fps depending on the app/menu I'm in
Click to expand...
Click to collapse
Can you provide me the following?:
1- MIUI vers. (i.e 12.0.3.0 QJGEUXM)
2- Go to terminal a run su and then:
Code:
getprop ro.vendor.smart_dfps.enable
-Output should be false, if it's true, then you didn't set it right.
I think a lot of people mix up framerate and refresh rate. Just an FYI, the thing that should be of interest is the refresh mode in power monitor. Check these screenshots, the circled value should stay at 120Hz consistently. Another screenshot I provided below without this mod shows 60Hz encircled when device not touched(which we don't want). The value on the right side of it (also in screenshots) is the framerate provided from the app (process) and indicates the actual frames displayed on the screen, if the screen isn't changing or moving, then there is nothing to display 120 frames about and will drop to 1 fps, which is completely normal.
Version for Marshmallow is available here: https://forum.xda-developers.com/t/...zation-for-old-touchwiz-mm-framework.3372401/
Version for Nougat is available here: https://forum.xda-developers.com/t/...stomization-for-touchwiz-n-framework.3692391/
Version for Oreo is available here: https://forum.xda-developers.com/t/...stomization-for-touchwiz-o-framework.3749479/
Version for Pie is available here: https://forum.xda-developers.com/t/...-14-customize-samsung-oneui-24-05-20.3908114/
Version for Q is available here: https://forum.xda-developers.com/t/...customize-samsung-oneui-2-0-30-12-20.4044757/
Version for R is available here: https://forum.xda-developers.com/t/...customize-samsung-oneui-3-x-14-03-21.4212051/
Firefds Kit [ S ]
Xposed module for Samsung S devices.
Known working devices:
Galaxy S20
Galaxy S20
Galaxy S10
Features
The module has the following features:
Fake system status to Official
Custom advanced power menu options:
Power off
Restart
Emergency mode
Recovery (with custom text)
Download
Data mode switch
Screenshot
Switch User (when multi user is enabled)
SystemUI restart
Flashlight
Screen Recorder (requires Samsung screen recorder app installed)
Disable restart confirmation
Enable performing power menu reboot / power off actions only after unlocking secure lock screen (stock behavior)
Disable display of power menu when secure lockscreen is locked
Change default behavior of reboot to reboot to recovery
Replace Reboot to Recovery icon with system default restart icon
Enable call recording and call recording settings
Replace add call button instead of call recording and adding record by menu option
Clock Size option
Enable Call ID and spam protection option
Enable Screen Record tile and Settings options
Enable screen record while in call
Enable additional advanced hotspot settings option
Hide VoLTE icon in status bar
Hide persistent USB connection notification
Hide persistent charging notification
Enable block phrases in messages app settings
Enable native blur on notification panel pull down
Enable multi user toggle
Set max user value selector
Show seconds in status bar clock toggle
Show AM/PM for seconds on clock toggle
Show clock date on right of clock toggle
Add date to status bar clock options
Enable fingerprint unlock on reboot toggle
Enable biometrics unlock on reboot toggle
Add network speed menu to show network speed in the status bar
Data icon symbol selection (4G, LTE, 4G+, 4.5G)
Show Data usage view in quick panel
Double tap for sleep
Hide NFC icon
Disable Bluetooth toggle popup
Disable sync toggle popup
Disable high level brightness popup
Hide carrier label
Carrier label size selection
Disable loud volume warning
Disable volume control sound
Disable low battery sound
Screen timeout settings
NFC behavior settings
Auto MTP
Disable camera temperature check
Enable camera shutter sound menu
Disable call number formatting
Disable SMS to MMS threshold
Force MMS connect
Bypass exchange security (currently not working)
Disable signature check
Disable secure flag
Attention
This version was tested by the community and not by me, as I don't have an Android 12 Samsung device.
THERE COULD BE BUGS/CRASHES/BOOTLOOPS, but it's pretty stable.
Please upload any xposed logs when you encounter any issue. I can't help you without the logs!
Installation
To install this module you need the following apps and modules installed on your device:
Magisk v24.0 and above - https://github.com/topjohnwu/Magisk/releases
Option 1 - Zygisk
LSPosed Magisk Zygisk Release module v1.8.2 and above - https://github.com/LSPosed/LSPosed/releases
Option 2 - Riru
LSPosed Magisk module v1.8.2 and above - https://github.com/LSPosed/LSPosed/releases
Riru Magisk module v25.0.0 and above - https://github.com/RikkaApps/Riru/releases
Download
Directly from LSPosed Manager or from Github : https://github.com/Xposed-Modules-Repo/sb.firefds.s.firefdskit/releases
Source Code
https://github.com/Firefds/FirefdsKit/tree/S
Known Issues
A lot has changed since Android 11. Since I don't have an Android 12 device all tests have been done with various testers. THERE MAY BE UNKNOWN ISSUES!!
Some features are removed on purpose. Since GravityBox has been working on Samsung Oreo devices without much issues, I only implemented features that need special Samsung coding.
Reporting Issues
When reporting an issue, please include Xposed logs and screenshots if any. Reporting should be done through Github - https://github.com/Firefds/FirefdsKit/issues
External Libraries
The project uses the following libraries:
https://github.com/rovo89/XposedBridge
https://github.com/rovo89/XposedMods/tree/master/XposedLibrary
Samsung framework libraries which are used for compile only
EdXposed Whitelisting
Users who want to use EdXposed's whitelist feature should whitelist the following apps:
Android System - android
Call - com.samsung.android.incallui
Call Settings - com.samsung.android.app.telephonyui
Camera - com.sec.android.app.camera
Contacts - com.samsung.android.contacts
Email - com.samsung.android.email.provider
Firefds Kit - sb.firefds.s.firefdskit
Messaging - com.samsung.android.messaging
MTP Application - com.samsung.android.MtpApplication
NFC - com.android.nfc
One UI Home - com.sec.android.app.launcher
Settings - com.android.settings
Smart Capture - com.samsung.android.app.smartcapture
Software Update - com.wssyncmldm
System UI - com.android.systemui
Credits
This module wouldn't have been here without the following people:
RikkaW - Creator of Riru Magisk module, which provides a way to inject codes into zygote process
@rovo89 - Creator of the original Xposed framework APIs
solohsu and MlgmXyysd - Creators of the EdXposed Magisk module and Installer that made all of this possible
@C3C076 - Creator of GravityBox Xposed modules, which I learnt a lot from
@wanam - Creator of the original XTouchWiz module, which this module is based on.
@topjohnwu - Creator of Magisk
@AbrahamGC - For the Extended Power Menu - Pie - Odex framework Smali guide
Big thank you to @m8980 and @ianmacd for testing countless versions and sending xposed logs
Telegram
Announcements and pre release versions - https://t.me/firefdskit
This is a moded version of Wanam's XTouchWiz:
https://github.com/wanam/XTouchWiz
Hi @firefds, thanks a lot for releasing your module for Android 12! Highly appreciated!
Also thanks to @m8980 and @ianmacd for doing the testing!
The module is working very well on my S10e, although I have to admit that - since I'm on a custom ROM - I don't need all features and only use the Double Tap For Sleep function and the Advanced Power Menu.
There's one optical issue in the Advanced Power Menu that I would like you to fix: The additional icons for Recovery Mode, Download Mode and Restart SystemUI don't match the style of the original Samsung icons for Power Off and Restart, i.e. they have a different line thickness and use a font that's not consistent with the look of One UI 4.0.
I made a screenshot of how it looks with the current icons and an edited version of the screenshot of how IMHO it should look like, please see attached files.
For this I extracted the three PNG images from the res folder of your APK and edited them to match the look of One UI 4.0: I combined the shape of the restart icon, the colour of the original icons and added the Letters "R", "D" and "UI" with the Google Sans font, which is the standard system font of Android 12.
I attached the edited PNG images, so you can easily put them into your module.
I hope that you like the new icons and am looking forward for an updated version of your module. Thanks!
okij said:
Hi @firefds, thanks a lot for releasing your module for Android 12! Highly appreciated!
Also thanks to @m8980 and @ianmacd for doing the testing!
The module is working very well on my S10e, although I have to admit that - since I'm on a custom ROM - I don't need all features and only use the Double Tap For Sleep function and the Advanced Power Menu.
There's one optical issue in the Advanced Power Menu that I would like you to fix: The additional icons for Recovery Mode, Download Mode and Restart SystemUI don't match the style of the original Samsung icons for Power Off and Restart, i.e. they have a different line thickness and use a font that's not consistent with the look of One UI 4.0.
I made a screenshot of how it looks with the current icons and an edited version of the screenshot of how IMHO it should look like, please see attached files.
For this I extracted the three PNG images from the res folder of your APK and edited them to match the look of One UI 4.0: I combined the shape of the restart icon, the colour of the original icons and added the Letters "R", "D" and "UI" with the Google Sans font, which is the standard system font of Android 12.
I attached the edited PNG images, so you can easily put them into your module.
I hope that you like the new icons and am looking forward for an updated version of your module. Thanks!
Click to expand...
Click to collapse
Thanks! This looks great! I'll add it to the next version
firefds said:
Thanks! This looks great! I'll add it to the next version
Click to expand...
Click to collapse
Thanks! I'm glad you like it and look forward to the next version.
IIRC Firefds Kit 11 uses the same icons (I have been using it until I switched to Android 12 two months ago), so you might use the new icons there too.
Thanks.
All my devices now bootloop with NoClassDefFoundError: com.android.systemui.BasicRune
Any chance we could add those whitelists to LSposed "Recommended"? Exactly the most important call recording check is missing.
Btw if LSposed 1.7.2 is installed, Riru can be uninstalled? -> looks like Sui uses Riru, so no switching.
In the end, I could leave Firefds enabled if I don't change anything, luckily call recording is on by default.
Thanks for the update for Android 12. Everything working good on my A52s 5g. Hope that one day you can add the ability to adjust the height of the navigation bar. That was available in the gravitybox app but there is no upgrade for 12 yet and not sure there will be which is why I've asked here... appreciate your efforts though.
Is there an easy way to fix bootloop in case something went wrong?
donkeyman1234 said:
Is there an easy way to fix bootloop in case something went wrong?
Click to expand...
Click to collapse
You can go in twrp to /data/ app/ then sort folder of date and first one should be folder with firefds app and for me delete it worked and I didn't have to disable lsposed modules or the magisk
Kuba1996 said:
You can go in twrp to /data/ app/ then sort folder of date and first one should be folder with firefds app and for me it worked and I didn't have to disable lsposed modules or the magisk
Click to expand...
Click to collapse
Thanks, but I mean if no twrp I can't boot into the phone, only stock recovery . Is there anything I can do( not factory reset)?
donkeyman1234 said:
Thanks, but I mean if no twrp I can't boot into the phone, only stock recovery . Is there anything I can do( not factory reset)?
Click to expand...
Click to collapse
Do You have oem unlock and debbuging on? If yes You can install twrp. Or mabye try sideload something like recovery arome file manager (possible working only in twrp). How You root without custom recovery?
How to disable Magisk modules without Magisk and TWRP recovery
Hi, I installed an incompatible Magisk module in the past, which cause bootloop of my phone. Co I dirty flashed my ROM (Pixel Experience) to get my phone work again. My current situation is that I cannot flash Magisk because an incompatible...
forum.xda-developers.com
You can look at last post here and try do something like that. Mabye try in recovery choose "update from adb" and try erase with adb command (your directory: riru-core). Or try use this but I dont think it will work
[Tool][Aroma] Magisk Manager Recovery Tool V2.5
Warning: It's not a Magisk module! Description This is a Magisk module management tool that can be used in Recovery mode. It's based on Aroma Installer. You can manage almost everything in Magisk with this tool. You can manage installed modules...
forum.xda-developers.com
Kuba1996 said:
Do You have oem unlock and debbuging on? If yes You can install twrp. Or mabye try sideload something like recovery arome file manager (possible working only in twrp). How You root witchout custom recovery?
Click to expand...
Click to collapse
I used magisk patched AP file to root. There is no twrp for s22u.
donkeyman1234 said:
I used magisk patched AP file to root. There is no twrp for s22u.
Click to expand...
Click to collapse
Also You can flash in odin patched ap and rest of file but with HOME_CSC not CSC
Check this:
donkeyman1234 said:
I used magisk patched AP file to root. There is no twrp for s22u.
Click to expand...
Click to collapse
Had the same issue with my s22u. I reflashed through odin. Gonna try and flash this module again with magisk bootloop protector. fingers crossed.
Update
Did try flashing it 2 more times, it is causing bootloop after enabling any option and restarting.
Recovered by disabling all magisk modules from adb.
Hope there will be a fix soon.
Hello,
Thank you for A12 update.
So nice to have your magic on this version.
I would also love to see the ability to adjust navbar, and the possibility to move cursor with buttons in navbar like in GravityBox.
For me, Force MMS to connect isn't working on BeyondRom 4.1.
Is it working for others ?
I am using LSPosed zygist latest version and safety net 2.2.1
nishantgupta107 said:
Update
Did try flashing it 2 more times, it is causing bootloop after enabling any option and restarting.
Recovered by disabling all magisk modules from adb.
Hope there will be a fix soon.
Click to expand...
Click to collapse
Yup, currently the rule is don't do any change. I tried do partial changes, but no luck. I simply keep it running with default settings. Also bootloop recovery wasn't that fun, it did kill some OS settings I hardly noticed - i had to walk through all the settings.
doggydog2 said:
Yup, currently the rule is don't do any change. I tried do partial changes, but no luck. I simply keep it running with default settings. Also bootloop recovery wasn't that fun, it did kill some OS settings I hardly noticed - i had to walk through all the settings.
Click to expand...
Click to collapse
Yes, some os settings did get reset. Not sure why. But now I'll wait for a stable release (I have reflashed it now 5-6 times)
Arobase40 said:
You can install Magisk Bootloop Protector module...
It will disable Magisk modules when bootloop occurs.
Click to expand...
Click to collapse
Thanks. I did install, but it did not work, the phone kept rebooting, reflash was my last resort.
Bootloop
S10 plus UI 4.1 A12
LSPosed-v1.8.0-6482-zygisk