Related
Hi!
First off let me say thanks to R_a_z_v_a_n for redirecting me and hope that I'll find my answer here ^^
So I Have this device called HP 7 VoiceTab 1321RA (not with Slate just HP 7 Voicetab), wanting to have a custom recovery then I tried to flash a CWM Custom Recovery for HP Slate 7 VoiceTab because I thought it was the same and ends up bricking my phone. It ends up in a bootloop which only shows HP sign for a few seconds and dead. But I managed to find out that I can access the recovery menu (or so I thought it is), but the options was choosing between Fastboot Mode, Normal Boot, Recovery Mode, and VART Mode.
I tried to enter Fastboot Mode before and tried to access it via PC but somehow I can't find the device by entering adb devices and fastboot devices. Anyways, I have downloaded a stock update.zip for it but not the original KitKat one which I get from the first time I bought it but rather the JB ones. I think by flashing this would help me recover the device but the only problem is I don't know which method should I use to Flash it. Since I don't have the Stock Recovery or ANY kind of recovery at all, I guess I'm stuck. And it won't start to the home page so I can't set the USB debugging options. Please guide me through this >.<
Thanks a lot!
Been fighting with it for 2 days now and still no result came.
So here's the update so far....
I tried on my other device in order to understand how my PC reads ADB and now I kinda gets it. But the problem is now can't get the device to enable USB Debugging because I can't access options at all.
Secondly, since I left it on for the night because charging seems to trigger the bootloop too, now I can't access the fastboot mode like I was last night. And it constantly repeating this sequence: [battery scene with the "charging battery" symbol] > [HP Powered by Android screen] repeated for 2-3 times > [low battery need charging screen] > repeat. And once I tried to connect to the PC, it goes to the same sequence too. When I tried to access the boot options (the screen which displays Fastboot Mode, Normal Boot, Recovery Mode, and UART Mode which I mention in Thread Starting post), it shows the low battery need charging scene and then repeating the same sequence as mentioned above.
I seem to figure out how to fix this but I still can't manage to access the fastboot mode yet. Will give update once I can try to.
Anyone can help me on this?
Thanks a lot!
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
I found my self in a deadlock!
PLEASE HELP :crying:
Could you unbrick yours
What service centre says about that problem i also ran in this problrm but i m trying to go to service centre for that
first off install drivers in your PC as admin
then use the official flashtool to flash ur stock firmware by entering fastboot or flashmode simple as that
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
Dude urs is a mtk device so sp flash tool should do the trick.... Just don't forget to install correct drivers....run both drivers and flash tool as admin..... Tell me when it's solved k
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
That is what im trying. To tell you urs is a mediatek device the official flashtool is sp flashtool
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
try to push the update.zip via adb sideload (Choose "update via ADB sideload" on recovery mode)using adb terminal on PC,as long as your tab can access the recovery mode.remember to backup all your data before u do it.
have a try it's 100% work on me
where I can download update.zip file? anyone can help?
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
can you explain how did you managed to charge the device??? please its a request......jst help me out :crying::crying:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
i have same problem.
can someone solved it?
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
mirul_up said:
i have same problem.
can someone solved it?
Click to expand...
Click to collapse
pseudosane said:
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
Click to expand...
Click to collapse
Go through this thread http://forum.xda-developers.com/showthread.php?t=2292828 it will definitely solve your problem, from the screen-shot it seems that you are using windows 10, i'm not sure that omap4430 drivers will work on windows 10 or not, but you'll try otherwise do the process on windows 7, your phone will revive...
@Codeplex its to complicated thread.
before mine become like this my phone alway succes writing recovery via adb fastboot but now i try writing recovery via adb fastboot always filed.
flashing firmware with cmahendra method always get 15% error..
I think all dev not care anymore about our phone..,
I would like to know if someone could make a custom recovery and a stock version of android that I could put on my Blu Pure XR. I don't care if get rid of the 3d Touch on the phone. I just would like to have the stock android interface again and probably also the ram management will be better on the stock version.
I have the same request, would love to see TWRP. I'd like to install pixel launcher as system app and remove the adsup fota spyware.
The Pure XR is otherwise a great phone. Power management on stock is fantastic, i can get 6-7 hours of screen on time.
The Pure XR is essentially a Gionee S8 but sadly I dont see any custom recovery or development interest for that either.
Include me as well. Thanks
So the Pure XR is similar/same to the Symphony Helio S20...
There's a thread here that has a working twrp: https://forum.xda-developers.com/android/general/how-to-root-symphony-helio-s20-t3491123
I tested the recovery.img by loading it with fastboot without flashing and it worked!
You'll need adb/fastboot and the drivers first. Then boot the phone into fastboot mode by holding power + Up keys.
Select fastboot. After that, run: fasboot devices to make sure your phone is detected. Once detected:
fastboot oem unlock
reboot the phone, it'll do a force wipe
hold power+up keys again and boot to fastboot mode
Now, run this on your PC: fastboot boot recovery.img
Once the image is transferred, the screen goes blank...wait a min or two and TWRP will show up.
rom/firmware blu pure xr?
Anyone found a good stock ROM/Firmware for the Blu Pure XR?
if you finde one just tell us
ishman27 said:
Anyone found a good stock ROM/Firmware for the Blu Pure XR?
Click to expand...
Click to collapse
if you finde one just tell us
exciter0 said:
So the Pure XR is similar/same to the Symphony Helio S20...
There's a thread here that has a working twrp: https://forum.xda-developers.com/android/general/how-to-root-symphony-helio-s20-t3491123
I tested the recovery.img by loading it with fastboot without flashing and it worked!
You'll need adb/fastboot and the drivers first. Then boot the phone into fastboot mode by holding power + Up keys.
Select fastboot. After that, run: fasboot devices to make sure your phone is detected. Once detected:
fastboot oem unlock
reboot the phone, it'll do a force wipe
hold power+up keys again and boot to fastboot mode
Now, run this on your PC: fastboot boot recovery.img
Once the image is transferred, the screen goes blank...wait a min or two and TWRP will show up.
Click to expand...
Click to collapse
When I connect the phone through Fastboot and enter the command "fastboot devices," the phone is never recognized. I'm using Windows 10. Any help would be appreciated.
I used Linux instead. Have you installed the mtk and adb windows drivers?
exciter0 said:
I used Linux instead. Have you installed the mtk and adb windows drivers?
Click to expand...
Click to collapse
Yes, I installed the mtk and adb drivers however while adb works and detects my phone, fastboot does not.
Ok, I attempted using the SP Flash Tool on Windows 10 and successfully installed TWRP and rooted the phone. The only flaws are that the phone takes a few minutes to load into TWRP and unfortunately, there are still no custom roms on the device. It is a good start however.
Galaxxus_Rosarrius said:
Ok, I attempted using the SP Flash Tool on Windows 10 and successfully installed TWRP and rooted the phone. The only flaws are that the phone takes a few minutes to load into TWRP and unfortunately, there are still no custom roms on the device. It is a good start however.
Click to expand...
Click to collapse
Hey bud, big favor, would you describe step by step the rooting process, I used SP Flash Tool on windows 7 to install TWRP and it gave the ok check marK, then I tried to boot into recovery and I found out that TWRP was not installed. Do you have to unlock the bootloader to be able to install TWRP using SP Flash Tool? Thanks in advance.
Sent from my SM-G935T using XDA-Developers Legacy app
Hello everyone, I need your help, I've been trying to unlock my bootloader to root my phone, under setings I have developer options-OEM UNLOCK, but I only get as far as FASTBOOT MODE using my laptop as well as my pc, I tried this process with Windows 10, Windows 7 and latest Ubuntu. I tried different data cables, different usb ports 2.0 and 3.0 and nothing seems to work, I can put the phone on FASTBOOT MODE with my pc or lap, but then after that it looks to me that there is no comunication between my pc and phone. I installed all drivers several times and under DEVICE MANAGER everything looks good, as far as data cables I'm using 2 blu original data cables as well as aftermarket ones. Any help will be appreciated. Thanks in advance and have a good day.
Sent from my SM-G900T using XDA-Developers Legacy app
oscarmaldonado said:
Hey bud, big favor, would you describe step by step the rooting process, I used SP Flash Tool on windows 7 to install TWRP and it gave the ok check marK, then I tried to boot into recovery and I found out that TWRP was not installed. Do you have to unlock the bootloader to be able to install TWRP using SP Flash Tool? Thanks in advance.
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
I remember something similar to this happening to me when I used a different version of SP Flash tool. Try SP Flash Tool v5.1624.00.000. After this make sure you have the scatter file for the MT6755 as well as the recovery file for the phone. Make sure that you have selected the scatter file for the phone and that the recovery.img is in the same directory as the scatter file.
Once this is done, make sure that you have installed the preloader or VCOM driver for the phone. This is tricky as the opportunity to apply the correct driver comes when you are powering on the phone and in this time you must click on the device that pops up in this time, right click it, and click properties.
Once this is done, go back to SP Flash Tool and click download, your phone must be off and unplugged before doing this. Then after this step, plug in your phone and the download process should begin (this might take a while). After this, boot into recovery mode which also will take around 3-5 minutes maybe more. After this you will have TWRP installed and from there you can install various apps including SU.
Galaxxus_Rosarrius said:
I remember something similar to this happening to me when I used a different version of SP Flash tool. Try SP Flash Tool v5.1624.00.000. After this make sure you have the scatter file for the MT6755 as well as the recovery file for the phone. Make sure that you have selected the scatter file for the phone and that the recovery.img is in the same directory as the scatter file.
Once this is done, make sure that you have installed the preloader or VCOM driver for the phone. This is tricky as the opportunity to apply the correct driver comes when you are powering on the phone and in this time you must click on the device that pops up in this time, right click it, and click properties.
Once this is done, go back to SP Flash Tool and click download, your phone must be off and unplugged before doing this. Then after this step, plug in your phone and the download process should begin (this might take a while). After this, boot into recovery mode which also will take around 3-5 minutes maybe more. After this you will have TWRP installed and from there you can install various apps including SU.
Click to expand...
Click to collapse
Thank you very much, I'm gonna give it a try as soon as I get a chance, I'll report back. Thanks again.
Sent from my SM-N910T3 using XDA-Developers Legacy app
Hi everyone, TWRP has been released by lopestom here https://forum.xda-developers.com/pure-xr/development/twrp-twrp-3-1-x-x-blu-pure-xr-p0030-t3623865
Since the Pure XR threads are very slim here I thought I'd post this here.
Seems my XR's data has got very slow, signal strength weak, etc.
Trying to figure out if this is Cricket or something up with the phone. My wife has a Blu Life one X3 and the same Cricket and her signal and data speeds are always better than mine.
What are some things to check/look for? I've tried a few like manually choosing the Network, changing the APN settings, etc.
Any further advice would be greatly appreciated.
So, i installed Xposed, and like many people, i got stuck in the logo... No big deal there... Went to look for some help, and it said to go to fastboot, so I went, but it got stuck in the fastboot logo. Then I connected it to the computer and when I try to list the ADB devices I Ialways get an error saying the server is outdated...
I really need some help! I can't find anything online to help me!
Thanks in advance!
Edit: I submitted a bootloader unlock request to Xiaomi earlier today, but I can't see if its approved or not because phone doesn't work
well,
if you are in fastboot mode then the command is "Fastboot Devices", Not "adb Devices"
_____________________________________________
and about boot loop problem try to flash miui fastboot rom.
_____________________________________________
And about bootloader request problem you can go to edl mode and flash miui without any permissions
Thanks:good::good:
nishant2222 said:
well,
if you are in fastboot mode then the command is "Fastboot Devices", Not "adb Devices"
_____________________________________________
and about boot loop problem try to flash miui fastboot rom.
_____________________________________________
And about bootloader request problem you can go to edl mode and flash miui without any permissions
Thanks:good::good:
Click to expand...
Click to collapse
I tried, but i cant seem to go to edl mode through fastboot, any tips? and because of bootloader lock i cant flash fastboot rom with MI Flash
Edl mode needs a specific fastboot version.
For the Redmi Note 3 Pro / Special Edition
Download and extract this package on your PC.
Enter fastboot mode by holding Power and Vol- at the same time. Wait until the Mi Bunny appears, then connect the phone to the PC.
Run reboot.bat in the extracted package. A command prompt will appear. Press a key to reboot the phone to EDL mode.
Upon entering EDL mode, the screen should turn blank. The notification LED might be blinking red. Done.
To get out of EDL mode, hold the Power button for about 10 seconds.
Click to expand...
Click to collapse
Above quote taken from xiaomi reddit wiki.
If the above doesn't work, see the link for deep flash cable, shouldn't be need for kenzo/kate.
How you flashed/installed xposed on locked bootloader is another question?
You may need to update your adb/fastboot version + device drivers(adb)
corkiejp said:
Above quote taken from xiaomi reddit wiki.
If the above doesn't work, see the link for deep flash cable, shouldn't be need for kenzo/kate.
How you flashed/installed xposed on locked bootloader is another question?
You may need to update your adb/fastboot version + device drivers(adb)
Click to expand...
Click to collapse
Ok, so when i try to reboot in edl, it just reboots as normal after screen goes blank...
I installed Xposed with an APK
Sorry if i'm being annoying, but I just want this fixed
KaiZix said:
Ok, so when i try to reboot in edl, it just reboots as normal after screen goes blank...
I installed Xposed with an APK
Sorry if i'm being annoying, but I just want this fixed
Click to expand...
Click to collapse
Mate, watch any video on YouTube. You're not understanding from text instructions.
AtomR said:
Mate, watch any video on YouTube. You're not understanding from text instructions.
Click to expand...
Click to collapse
Can't find any... Recommendations?
EDL Mode: - https://www.youtube.com/watch?v=LDGViyDYPbU
If you can't get into EDL mode, you may need to use the deep flash cable method.
corkiejp said:
EDL Mode: - https://www.youtube.com/watch?v=LDGViyDYPbU
If you can't get into EDL mode, you may need to use the deep flash cable method.
Click to expand...
Click to collapse
I can't get into EDL mode, and I can't make/buy a deep flash cable... I'm getting really scared now...
About ADB, how can I fix it?
KaiZix said:
I can't get into EDL mode, and I can't make/buy a deep flash cable... I'm getting really scared now...
About ADB, how can I fix it?
Click to expand...
Click to collapse
Installing Mi Flash should have put the correct drivers on your PC.
But can be got from here: - https://xiaomifirmware.com/downloads/download-pc-drivers-xiaomi-redmi-note-3/
And I already linked adb/fastboot tools.
IF your comfortable opening your device, there is also a test point method you could try.
http://en.miui.com/thread-244814-1-1.html
Could not find a English video, so maybe try googling more and you might find one.
If not, you could ask at local repair shop, if they would fix it for you. Using Cable/ TP method.
Note for other readers:- MIUI roms need a special version of xposed, for it to work. And installing from an app would more than likely would have use the wrong version. Should never be done on a locked bootloader, only asking for trouble. (Rovo89 is currently trying to bring MIUI support to the official version for nougat roms)
I seem to have completely knackered my phone and maybe someone can help. I've spent days trying to install a custom rom on my G8 power XT2041-3. The bootloader was unlocked. I had TWRP on it and couldn't figure out why I couldn't go to fastbootd to install the Resurrection Remix ROM or HavocOS ROM. Eventually I found the stock firmware for my device and flashed the stock recovery.img to replace TWRP. I was hopeful when I finally saw fastbootd on my screen and went ahead to flash boot.img (all seemed fine) followed by flash system of the custom ROM. It got to 3/3 and then said something about Failed: Operation not Permitted. I can't remember the exact wording now and can't try again because my phone is pretty much useless.
If I try to power on my phone it takes ages trying to boot (alternately between the bootloader unlocked warning and the big M for Motorola), but eventually I get a message saying:
Boot Failed. Press Power Key to Retry
No bootable A/B slot
Failed to boot Linux, falling back to fastboot
Fastboot Reaso: Fall through from normal boot mode
Nothing seems to work. I can't boot into any recovery. The phone won't start at all apart from this very basic looking bootloader. My device is recognised by fastboot devices but that's about it. I can't flash fastboot commands. I tried flash partition gpt.bin. I tried to flash recovery.img again. A few things. But nothing works.
I'm using Linux so can't download RSD Lite that I wanted to try or the Motorola Research and Smart Assistant. Does anybody have any suggestions please? I'm at my wits end with the thing.
Thanks
jibbajobs said:
I seem to have completely knackered my phone and maybe someone can help. I've spent days trying to install a custom rom on my G8 power XT2041-3. The bootloader was unlocked. I had TWRP on it and couldn't figure out why I couldn't go to fastbootd to install the Resurrection Remix ROM or HavocOS ROM. Eventually I found the stock firmware for my device and flashed the stock recovery.img to replace TWRP. I was hopeful when I finally saw fastbootd on my screen and went ahead to flash boot.img (all seemed fine) followed by flash system of the custom ROM. It got to 3/3 and then said something about Failed: Operation not Permitted. I can't remember the exact wording now and can't try again because my phone is pretty much useless.
If I try to power on my phone it takes ages trying to boot (alternately between the bootloader unlocked warning and the big M for Motorola), but eventually I get a message saying:
Boot Failed. Press Power Key to Retry
No bootable A/B slot
Failed to boot Linux, falling back to fastboot
Fastboot Reaso: Fall through from normal boot mode
Nothing seems to work. I can't boot into any recovery. The phone won't start at all apart from this very basic looking bootloader. My device is recognised by fastboot devices but that's about it. I can't flash fastboot commands. I tried flash partition gpt.bin. I tried to flash recovery.img again. A few things. But nothing works.
I'm using Linux so can't download RSD Lite that I wanted to try or the Motorola Research and Smart Assistant. Does anybody have any suggestions please? I'm at my wits end with the thing.
Thanks
Click to expand...
Click to collapse
If you don't have a windows running computer, you can try a virtual machine with Virtual Box to emulate a Windows computer and try the Motorola Research and Smart Assistant
Constantinologia said:
If you don't have a windows running computer, you can try a virtual machine with Virtual Box to emulate a Windows computer and try the Motorola Research and Smart Assistant
Click to expand...
Click to collapse
Thank you very much for that. I'd never heard of Virtual Box before. I'll have more time tomorrow to install it and see how I get on. Hopefully I can fix it because I think I'm all out of other options. Much appreciated!