Greetings One Fusion users, after some time of research and testing I'd like to write this guide for you all. The guides online were inconsistent and outdated so the main purpose of this is giving an updated guide.
But. I have to say this, if you follow this guide correctly your phone will be ERASED, you don't need to unlock bootloader or do extra things not mentioned in this guide. Also, I'm not responsible of any damage made to your device.
Part 1: What we need?
1: Minimal ADB and Fastboot: You might know it, or not, if that's the case go and Google it or get it here, thanks goes to @shimp208
Just install it but don't open it yet.
2: Drivers: Get your 32 bits drivers here, and 64 bits drivers here.
Just install 32 bits or 64 bits, depends of your Windows version.
3: Firmware: There's one place of firmwares for all our Moto devices, just click here and you will get a bunch of folders, those are named by your country/region and carrier. To know yours, just go to Settings>About Phone, then you'll see Software Channel, the name in this is the folder you'll be picking in the mentioned website, download the latest one or older if you want to downgrade.
Unzip it wherever you want, just make sure you remember the folder, for practical purposes, unzip it where you installed Minimal ADB and Fastboot before.
4: Your stock USB-A to USB-C cable, USB-C to USB-C might work too but haven't tested.
5: Patience.
Part 2: Barry Allen... I mean The Flash.
Save your data. Seriously, if you don't want to say bye to your data you still can save now.
But if you alredy have backup or you just don't care, let's begin.
1. Open a command promp, go to the folder where you already unzipped your firmware, hold your Shift key and right click on a blank spot of the folder, then click on Open command promp here.
2. Turn off your phone, once off, hold volume down and power buttons until you see the green android, at this point plug in your phone to your computer. On the command promp write
Code:
fastboot devices
If drivers are correctly installed, your serial number will be displayed, if not, your device could be still being recognized, try again in few minutes or reinstall drivers, rebooting PC may help this sometimes.
If your serial number was displayed, you can now proceed to flash the firmware, to ease this thing I will write you the commands:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot erase carrier
fastboot erase userdata
fastboot erase metadata
fastboot erase ddr
fastboot reboot
Just copy (all of them, not one by one) and paste them in the command promp, the flash starts.
After everything got flashed, you will have the last command ready for you to hit enter, and your device will reboot.
Thanks for reading, I hope I've helped you.
Questions are welcome!
just a little tip if you don't see the "Open command prompt here." as you shift+right click.
Click on the PowerShell option, wait until a blue window show up and type start cmd, now the command prompt window will open and you can continue with the command lines.
Does any of you guys know how can I disable the bootloader unlocked screen? I have recently rooted my device and can't find anywhere a way to disable the "bootloader unlocked" screen
and to erase the system partition as is ?, you also need how to install one in the same system partition
Related
Introduction:
Hey friends, as we know we can flash fastboot Miui Roms which comes with complete package and then we have to flash it with MiPHONE.exe. There are no other methods to flash roms Via PC! Roms can also be flashed with stock recovery, custom recovery but there should be a zip in sd card!Sometimes it even happen that we want to flash a rom/mod/zip and it fails! At that time we can restore via backup or flashing rom again.But what if there is NO ROM/BACKUP in SD CARD and ur in BOOTLOOP.
I tried numerous time flashing Miui fastboot rom via mi PHONE, but every time it gave me error 'The system cannot find the file specified.(0x80070002)' , I know i was doing somewhere wrong.Atlast I gave up and wanted to try different.
So I will be sharing with you a method to flash Miui Fastboot Roms by fastboot commands via ADB. Yes you can do it easily. Just enter the commands and hit enter.
Prerequisite :
Computer
Minimal adb and fastboot zip
MIUI FASBOOT ROM
Mi FLASH
(For installing usb drivers)
Steps to be performed :
1)Download minimal adb and fastboot zip and install it.
2) Also install Miflash for necessary usb drivers!
3)Download MIUI Fastboot roms zip and extract it in same folder where Minimal adb fastboot were installed.
FOR EXAMPLE : Mine path is C:\Program Files (x86)\Minimal ADB and Fastboot.
4)So extract files inside Minimal ADB and Fastboot FOLDER
5) Now go to Minimal Adb and Fastboot folder and HOLD 'Left Shift Button' and 'Right Click'
anywhere on folder area and there you can see OPEN COMMAND WINDOW HERE.
6) Follow the commands given below : Ps Enter commands one by one!!
Code:
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot
7) The phone will automatically reboot after entering last commands , so have patience!
ENJOY!!!!!!
ps :Btw this helped me fix my otg which was giving me error!
Can I suggest another solution, but not tested?
Just flash a CWM recovery .img, restart in recovery and use the sideload flash option to push and flash the .zip file of a rom.
All will be simplier if you use a Mac, no drivers needed, just ADB and platform-tools
Pi3rluigi said:
Can I suggest another solution, but not tested?
Just flash a CWM recovery .img, restart in recovery and use the sideload flash option to push and flash the .zip file of a rom.
All will be simplier if you use a Mac, no drivers needed, just ADB and platform-tools
Click to expand...
Click to collapse
Everyone doesnt have a Mac bro, I know it can be done via other methods too. Many people at this particular moment opt for easy way. this is damn easy , just download files put it in adb folder and hit command and done!!!
Since we have only one method for using via pc [ that also failed for me, maybe i was doing wrong] so i thought for doing this way!!
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot
After all the commands except erase boot and reboot I get en error: target report max download size of 671088640 bytes error cannot flash..............
Any help would be deeply apreciated
SOLVED!!!! Using this.
http://forum.xda-developers.com/showthread.php?t=2277112
can u tell me how u solved the max download size limit error.
Can you tell me how to create fastboot rom?
Does it works to with Mi4..?
i've tried anything,,but its useless, lucky i'm not bricked my phone,
i just want to upgrade from MIUI5 to MIUI6, i've try flashing with standart procedure on the xiaomi web, but useless.
in fastboot mode, my phone is not detected, neither when i plug in and use Mi PC Suite,
now i'm running on MIUI-V6.2.4.0.KXDCNBJ
can you help me, ?
thanks a lot it works! with the help of Pallmalli post
Hi there,
I tried this with my Redmi Note 2 (I misunderstood the thread and thought it was for ALL Xiaomi) and the phone is in a loop of rebooting all the time. Like searching the boot but doesn't find it! :S
How can I reinstall the boot?
PLEASE help...
Cannot Load
It say cannot load xxx.mbn
please help
i was entered the commands like u... but it showing error: cannot load 'tz.mbn'
oooh man, ur rock!!!
Sk.D said:
Introduction:
Hey friends, as we know we can flash fastboot Miui Roms which comes with complete package and then we have to flash it with MiPHONE.exe. There are no other methods to flash roms Via PC! Roms can also be flashed with stock recovery, custom recovery but there should be a zip in sd card!Sometimes it even happen that we want to flash a rom/mod/zip and it fails! At that time we can restore via backup or flashing rom again.But what if there is NO ROM/BACKUP in SD CARD and ur in BOOTLOOP.
I tried numerous time flashing Miui fastboot rom via mi PHONE, but every time it gave me error 'The system cannot find the file specified.(0x80070002)' , I know i was doing somewhere wrong.Atlast I gave up and wanted to try different.
So I will be sharing with you a method to flash Miui Fastboot Roms by fastboot commands via ADB. Yes you can do it easily. Just enter the commands and hit enter.
Prerequisite :
Computer
Minimal adb and fastboot zip
MIUI FASBOOT ROM
Mi FLASH
(For installing usb drivers)
Steps to be performed :
1)Download minimal adb and fastboot zip and install it.
2) Also install Miflash for necessary usb drivers!
3)Download MIUI Fastboot roms zip and extract it in same folder where Minimal adb fastboot were installed.
FOR EXAMPLE : Mine path is C:\Program Files (x86)\Minimal ADB and Fastboot.
4)So extract files inside Minimal ADB and Fastboot FOLDER
5) Now go to Minimal Adb and Fastboot folder and HOLD 'Left Shift Button' and 'Right Click'
anywhere on folder area and there you can see OPEN COMMAND WINDOW HERE.
6) Follow the commands given below : Ps Enter commands one by one!!
Code:
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot
7) The phone will automatically reboot after entering last commands , so have patience!
ENJOY!!!!!!
ps :Btw this helped me fix my otg which was giving me error!
Click to expand...
Click to collapse
thanks bro, it work on my mi3, i skip flash userdata.img
Hello, please help me - When i type first command - FAILED (remote: unknown command).. any solution please? REDMI 2 2GB RAM
Hi, is this method still applicable for miui 7 or 8? thanks in advance
Sent from my MI 3W using Tapatalk
from where can i download MIUI Fastboot roms zip
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot
After all above commands running successful
After reboot
To start Android, enter your password
More detalies
Hi,
Can you please be more specific about:
1. which mode does the phone need to be in while procedure? stay in boot-loop? boatloader mode? is recovery mode ok? download mode?
2. What files exactly to move to the minimal adb folder? there is the tgz file which extracts to the tar file which extracts to a folder - does that folder need to be copied? or the images file in that folder?
When trying to enter the lines some of them weren't exepted/missing.
Thanks,
Amitai
thank you SO MUCH for this tutorial, it worked perfectly for me.
@amitai, the phone needs to be in fastboot-mode, you can get there by typing "adb reboot bootloader" into commands (your phone has to be connected via USB); you will also be needing the FASTBOOT-ROM which you can get on the official miui website ... you also have to unpack them twice to get to the files. just copy all the files into the minimal adb folder. it does NOT work with normal miui roms, only with fastboot-roms!
any update about this Guide? Because we tried use on Xiaomi Mi 5 after first boot, Local Setting only Display China. And another issues two and third step is error (not available)
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
Any clues?
DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
1. Make sure your device is charged above 80%.
2. We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO G5 PLUS And LOCK THE BOOT LOADER
1. Download Moto G5s Plus Stock Firmware and other necessary files from the download link.
2. Extract and install ABD Fastboot Drivers drivers
3. Install ADB Fastboot Driver on your PC.
4. Install the Latest Motorola Drivers
5. Now extract stock firmware in ADB Fastboot folder
6. Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
7. Now, connect your device to your PC via a USB Cable.
8. Open a command prompt or PowerShell window and type the following commands:
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Now Setup the phone properly till you reach the main screen, don't skip any steps
Now use this second command
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash boot boot.img
fastboot oem lock
Flash the phone again with the first command and set it up again then boot to the fastboot again and flash the phone twice with the second command and your Motorola G5S PLUS should have a locked bootloader, keep in mind older Firmware would not work for this process to work, if you see any errors regarding bootloader.img not signed, don't worry and proceed with it.
Downloads:
HTML:
https://drive.google.com/drive/folders/1lWCQAjZBXM_iYHNwBO-5xKU4RY1FK9QV?usp=sharing
Kindly copy the full link to your browser and download the files, all the required files are present on the link
WIsh you guys all the best, I locked my bootloader the same and hope it will solve your problems too if you follow the instructions properly, I am no developer, I learned the hardway
Please Rate and comment if you liked my post helped you.
Shampak said:
DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
1. Make sure your device is charged above 80%.
2. We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO G5 PLUS And LOCK THE BOOT LOADER
1. Download Moto G5s Plus Stock Firmware and other necessary files from the download link.
2. Extract and install ABD Fastboot Drivers drivers
3. Install ADB Fastboot Driver on your PC.
4. Install the Latest Motorola Drivers
5. Now extract stock firmware in ADB Fastboot folder
6. Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
7. Now, connect your device to your PC via a USB Cable.
8. Open a command prompt or PowerShell window and type the following commands:
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Now Setup the phone properly till you reach the main screen, don't skip any steps
Now use this second command
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash boot boot.img
fastboot oem lock
Flash the phone again with the first command and set it up again then boot to the fastboot again and flash the phone twice with the second command and your Motorola G5S PLUS should have a locked bootloader, keep in mind older Firmware would not work for this process to work, if you see any errors regarding bootloader.img not signed, don't worry and proceed with it.
Downloads:
HTML:
https://drive.google.com/drive/folders/1lWCQAjZBXM_iYHNwBO-5xKU4RY1FK9QV?usp=sharing
Kindly copy the full link to your browser and download the files, all the required files are present on the link
WIsh you guys all the best, I locked my bootloader the same and hope it will solve your problems too if you follow the instructions properly, I am no developer, I learned the hardway
Please Rate and comment if you liked my post helped you.
Click to expand...
Click to collapse
hi, i have tried the same as you gave command. but unfortunately it doesn't work for me. i had installed soak test OREO then moved to Android P custom ROM, finally rolled back to android N to relock the bootloader. now i couldn't relock it.
i am getting error "still require valid signed image"
i am using sanders.
kindly assist me
Thanks
---------- Post added at 06:39 PM ---------- Previous post was at 06:35 PM ----------
hi, i have tried the same as you gave command. but unfortunately it doesn't work for me. i had installed soak test OREO then moved to Android P custom ROM, finally rolled back to android N to relock the bootloader. now i couldn't relock it.
i am getting error "still require valid signed image"
i am using sanders.
kindly assist me
Thanks
arunkumar.rp said:
hi, i have tried the same as you gave command. but unfortunately it doesn't work for me. i had installed soak test OREO then moved to Android P custom ROM, finally rolled back to android N to relock the bootloader. now i couldn't relock it.
i am getting error "still require valid signed image"
i am using sanders.
kindly assist me
Thanks
---------- Post added at 06:39 PM ---------- the Previous post was at 06:35 PM ----------
hi, I have tried the same as you gave the command. but unfortunately, it doesn't work for me. i had installed soak test OREO then moved to Android P custom ROM, finally rolled back to android N to relock the bootloader. now I couldn't relock it.
i am getting the error "still require valid signed image"
i am using sanders.
kindly assist me
Thanks
Click to expand...
Click to collapse
Don't worry about the signed image. Try the locking command twice back to back. Hope this helps
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
I was already waiting for it.:laugh:
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
I an waiting for TWRP...
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
Check development thread
cieffe54 said:
I an waiting for TWRP...
Click to expand...
Click to collapse
And i am waiting for end of corona pandemic.
Kollachi said:
And i am waiting for end of corona pandemic.
Click to expand...
Click to collapse
But i shared it too...
Hello and thank you for the fastboot roms !
How To Use This!
mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
Click to expand...
Click to collapse
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
there's not oneplus widget? i can't find it
Jackmitchell62 said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus Nord in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus Nord to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Others Commands to flash a fastboot rom
Oneplus Nord oxygen os install guide
Get OEM Drivers from https://oneplususbdrivers.com/download-oneplus-usb-driver/
Download Oxygen OS 10.5.4 for your compatible devices from https://sourceforge.net/projects/fastbootroms/files/OnePlus Nord/
(Boot loader Must be Unlocked)
If still able to boot into any version of Android:
1. Install Oneplus OEM Drivers
2. Open Settings
3. Click About
4. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
5. Enable ADB USB Debugger
6. Unzip the Oxygen OS File
7. Open CMD and run it as Administrator
8. Plug Your Oneplus Nord into your PC
9. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
10. This will make the link before the next line quite long.
11. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot)
If You are Unable to boot into any Operating System:
1. Install Oneplus OEM Drivers
2. Unzip the Oxygen OS File
3. Open CMD and run it as Administrator
4. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
5. This will make the link before the next line quite long.
6. Plug Your Oneplus Nord into your Computer
7. When your phone is powered off, Hold Volume Up, Volume Down and the Power Button until you get the Oneplus Logo with fastboot Beneath.
Once in the Bootloader:
1. Type fastboot devices to confirm that your device has been recognised by your PC.
2. After this Open the Oxygen OS Folder and double click Flash-All.adb and It will open in command Prompt.
3. This will take a long time but wait until the phone has booted up into your phones setup (Do Not touch the Phone or Computer).
4. Setup Your Phone but don’t setup anything as we need to wipe it again, so skip through everything.
5. Once in the primary OS connect to WIFI
6. Go to Settings and Update your phone to the latest version, you will get a message prompting you that the Boot loader is unlocked etc, Ignore this and continue.
7. Click the reboot button when prompted, your Software will update to the latest version of Oxygen OS.
Once Updated:
1. Open Settings
2. Click About
3. Find the build number and click the Build number Severn times until you get a message saying developer Options have been enabled.
4. Enable ADB USB Debugger
5. Unzip the Oxygen OS File
6. Open CMD and run it as Administrator
7. Plug Your Oneplus Nord into your PC
8. Type into CMD cd and drag the Oxygen OS Folder over CMD, then Click Enter
9. This will make the link before the next line quite long.
10. Then Type into CMD “adb reboot bootloader” (This will make your Phone Reboot into Fastboot).
11. Once in Fastboot type “fastboot OEM lock” then your phone will prompt you if you want to Lock the bootloader.
12. Use the volume button to scroll down and press enter to confirm that you want to lock your bootloader.
13. When locked your phone will reboot and it will wipe your operating system and reboot your device into setup.
14. You can now setup your phone as you wish.
Click to expand...
Click to collapse
Or simply use MSM tool ?
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
Reboot in recovery
Hello everyone, I need help.
I got the message "File system raw not supported." after executing the flash_all.bat and
Code:
boot_b, dtbo, modem_b, recovery, vbmeta, vbmeta_system,
was sent with status
Code:
OKAY
(the first part of the script, as far as I can see), then is supposed to reboot on fastboot and stays at
Code:
<waiting for any device>
, here is when my phone restarts in recovery instead (it says "fastbootd" in the upper part and a menu to select chinesse or english, but it's recovery mode, right?), then the first time I wited for 15 minutes but nothing happened, so I selected reboot into fastboot in recovery mode, then in CMD I got the message "fastboot: error Failed to boot into userspace fastboot; one or more components might be unbootable", and the seccond part of the script was executed, but with
Code:
FAILED (remote: 'Flashing is not allowed for Critical Partitions')
status in the writing process, and after,
Code:
"Invalid sparse file format at header magic"
with
Code:
FAILED (remote: 'Partition not found')
when trying to write system, vendor and product. My phone restarted and looked normar but wifi didn't work, and the UI started to fail after the configuration.
So I tried again, but without rebooting from recovery; how much time do I have to wait there?, maybe this will not work.
Please if someone knows how to solve my problem I'll be glad for the help.
MSM TOOL
https://forum.xda-developers.com/oneplus-nord/how-to/opnord-unbrick-tool-to-restore-device-t4148415
I succeeded from linux, everything seems to work fine now.
I just have one question, there's one file missing
fastboot flash storsec storsec.img
Is supposed to be like that or is that an important file missed?
That file doesn't exists in the 10.5.5-INDIA-NordOxygen_14_OTA_007_all_2008180229 zip file
I bricked my device and nothing (what i try) worked.
Hello Guys,
Thanks for the Roms and also for twrp @ mauronofrio!
If i try to flash in fastboot the roms, i get different fails:
the first part of commands are okay until "fastboot reboot fastboot"
than, until "fastboot flash xbl_config xbl_config.img" i get:
"writing 'xbl_config'...
FAILED (remote: Flashing is not allowed for Critical Partitions)"
and for the lasts, i get:
FAILED (remote: Partition not found)
I read that some windows-user have the same Problem and therrefore the Problem is not the bricked phone, is it right?
Someone knows the same Problem in linux? I prefer a solution without windows (msm-tool).
I tried to root and flash with twrp, now i know, it's impossible to flash zips until now. I try some other things with twrp, it's possible that i delete some partitions?
Someone have a good solution?
thanks for reading and support
Hi,
Few questions:
Has Global rom OP dialer? Can be enabled auto call recording with root or adb? I know abut Skvalex.
Can I flash 10.5.5 Global at 10.5.9 EEA (flash_all.bat)?
Getting stuck on odm and vendor flashing. It will not flash odm and vendor no file exists message (using flash all bat). Any help will be greatly appreciated.
Update: got it back to stock using edl mode.
You can flash this way. When you enter from the fastboot to the fastbootD mode Windows thinks it's a new device and doesn't recognize it. If you open device manager from control panel it will showns as unknow device. So all you have to do is install the driver again. Then you can flash anything you want in fastbootD.
-
What does "unbranded" mean here? Will I get OTA updates? Will this relock the bootloader?
delete
Hello - it's been about 10 years since I played with any XDA stuff or custom roms. I have a stock Motorola G Power that bricked itself. It will not boot and recovery mode just gives me "No Command". Only option seems to be factory data reset.
Can anyone suggest a procedure to allow me to either re-install the stock software to get into the phone or recover my data? Sadly I had not backed anything up since last summer.
Should I just try to reflash a stock rom to see if i can get in? Will flashing the rom kill the onboard storage?
Cant find the exact same version either:
SOFIA10/QPMS30.80-63-6-8-5
I found 63-6-8-10 and 63-6-8-3 but not the exact same. Phone is Retail US.
Any help would be appreciated.
Ok found the stock rom that matches 63-6-8-5. Do I just try to flash that back to get back into the phone with my existing data?
Uberhare said:
Ok found the stock rom that matches 63-6-8-5. Do I just try to flash that back to get back into the phone with my existing data?
Click to expand...
Click to collapse
You can try flashing the stock from and just skip the erase userdata step.
The firmware contains a file named flash_file.xml contains the flash commands
You can use Online FlashFile Converter to convert the .XML to simple fastboot commands.
You also should check if getvar is-userspace
Code:
fastboot getvar is-userspace
if yes you need to switch between fastboot and fastbootd
If it's no you don't need to worry about fastbootd
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
You can try flashing the stock from and just skip the erase userdata step.
Click to expand...
Click to collapse
Do I need to unlock the bootloader for flashing an original file?
Uberhare said:
Do I need to unlock the bootloader for flashing an original file?
Click to expand...
Click to collapse
No, you shouldn't need to but it's easier if the bootloader is unlocked.
Unlikely, you can unlock the bootloader now anyways.
Unless you enabled OEM Unlocking in Dev Options already.
If you did enable OEM Unlocking, I would Unlock the bootloader.
[Guide]Un/locking Motorola Bootloader
UnLocking and ReLocking Motorola Bootloader https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a Moto Bootloader Unlocking site Re-Locking see Post #4 More about bootloader UnLocking Post #2 Can my...
forum.xda-developers.com
Are the steps any different if the bootloader is locked? You mention it is easier if it is unlocked.
Thank you for the tutorial.
Uberhare said:
Are the steps any different if the bootloader is locked? You mention it is easier if it is unlocked.
Thank you for the tutorial.
Click to expand...
Click to collapse
Easier may not be the right word.
If the bootloader is unlocked, you are less likely to have issues flashing.
ADB devices - does not return any devices, although I can see the phone is connected with the Motorola recovery tool.
fastboot getvar is-userspace returns:
is-userspace: no
Finished. Total time: 0.002s
I found where fastbootd is.
C:\Android>fastboot getvar is-userspace
is-userspace: yes
Finished. Total time: 0.002s
Uberhare said:
ADB devices - does not return any devices, although I can see the phone is connected with the Motorola recovery tool.
Click to expand...
Click to collapse
adb devices will not work if the device is in fastboot mode.
Use fastboot devices when it's in fastboot mode.
sd_shadow said:
adb devices will not work if the device is in fastboot mode.
Use fastboot devices when it's in fastboot mode.
Click to expand...
Click to collapse
adb devices does not show anything in either mode. That is why I looked for fastboot mode. Should I trouble shoot that first?
This is what I want with the erase commands deleted at the end? The erase commands are what will kill my data or is there something else I need to remove?
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot erase carrier
fastboot erase ddr
fastboot oem fb_mode_clear
echo Press any key to restart the phone!
pause
fastboot reboot
exit
Looks like phone doesn't respond to commands in fastbootd only normal.
I successfully ran the batch file, but the phone still doesn't boot. What is my next step? (besides throwing it against the wall!)
Phone accepts all the files for the current version of software, as well as commands to clear some of the labels. So the userdata is still there, I just can't get to it. Can you read these with a jtag like the older phones?
What if I try to roll it forward to Android 11 through the stock roms?
Hello everyone,
I bought a Moto G Power that came with Android 11 and it's so laggy. I used to own this device on 10 and it was great. Well, I've downgraded to Android 10 successfully using the ROM files from Lenovo Rescue and Smart Assistant and flashing them with Platform Tools but afterrelocking the bootloader successfully using '.\fastboot oem lock' and rebooting the phone it says No OS is found. Is it even possible to relock the bootloader after downgrading on this device and booting into Android 10 even if it's an official firmware from Lenovo?
I'm using these instructions to flash the Android 10 files:
Moto G Power flashing guide
This guide also applies on other Moto phones shipping with Android 10 (not compatible with phone updated from Android 9) Requirements: * Adb must be up to date. You will use new fastbootd interface. You can toggle between bootloader and...
forum.xda-developers.com
Thanks everyone!
It's possible but you have to flash everything clean from adb using factory files found at https://mirrors.lolinet.com/firmware/moto/sofia/official/ There used to be an automated batch file for windows users I think, not sure since I use linux.
I'm sure there is a guide around somewhere for it regarding installing android platform-tools and the commands.
TaZeR369 said:
It's possible but you have to flash everything clean from adb using factory files found at https://mirrors.lolinet.com/firmware/moto/sofia/official/ There used to be an automated batch file for windows users I think, not sure since I use linux.
I'm sure there is a guide around somewhere for it regarding installing android platform-tools and the commands.
Click to expand...
Click to collapse
Yep I've tried that and also while on 10 and 11 I've pulled the ROM file folder from Lenovo rescue itself so I have the exact copy of the firmware. Still nothing. Weirdly when I'm on Android 10 and lock the bootloader I receive an error when using Lenovo Rescue to install Android 10 from them just to see what happens. Something about flash partition failed.
shylonite said:
Yep I've tried that and also while on 10 and 11 I've pulled the ROM file folder from Lenovo rescue itself so I have the exact copy of the firmware. Still nothing. Weirdly when I'm on Android 10 and lock the bootloader I receive an error when using Lenovo Rescue to install Android 10 from them just to see what happens. Something about flash partition failed.
Click to expand...
Click to collapse
I would forego anything to do with Lenovo Rescue, its unecessary and its automated process may be the thing at fault here. I suggest just grabbing the Android 10 factory files and flashing them manually with adb and see if the flash goes through that way. Just fished out the commands for you:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot erase userdata
fastboot erase ddr
fastboot flash dsp dspso.bin
fastboot oem fb_mode_clear