I'm trying to get lineage installed on my ANE-LX1
I followed the official guide but my phone doenst boot into system it only boots into twrp.
bcs nothing worked i had to reinstall the stock os again by reinstalling stock recovery and doing the download latest version option.
emui version before flashing: 9.1.0.370(C432E7R1P7)
kernel: 4.9
twrp: twrp-3.4.0-1-anne
if you need any additional info let me know.
and thank you in advance to everyone who helps
docxgames said:
if you need any additional info let me know.
Click to expand...
Click to collapse
docxgames said:
if you need any additional info let me know
Click to expand...
Click to collapse
More precisely? Which LineageOS?
the latest one that is available for the p20 lite it came out earlier today
this is the complete filename: lineage-16.0-20201228-nightly-anne-signed.zip
docxgames said:
the latest one that is available for the p20 lite it came out earlier today
this is the complete filename: lineage-16.0-20201228-nightly-anne-signed.zip
Click to expand...
Click to collapse
Okay, try this way out...(please read carefully)
[ROM][OFFICIAL][anne][9] LineageOS 16.0
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project...
forum.xda-developers.com
How to install TWRP over eRecovery :
[ROM][OFFICIAL][anne][9] LineageOS 16.0
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project...
forum.xda-developers.com
-Alf- said:
Okay, try this way out...(please read carefully)
Click to expand...
Click to collapse
ty for the quick reply i'll keep you updated if it worked
docxgames said:
ty for the quick reply i'll keep you updated if it worked
Click to expand...
Click to collapse
IMO first downgrade to EMUI 9.1.0.278. Most of custom ROMs require lower build number, on latest build may or may not work correctly...
quick update: it worked more then before but not yet all the way bcs now i'm stuck on a bootloop; lineageos bootlogo is showing and moving but restarts after about 5 min.
docxgames said:
quick update: it worked more then before but not yet all the way bcs now i'm stuck on a bootloop; lineageos bootlogo is showing and moving but restarts after about 5 min.
Click to expand...
Click to collapse
Okay, I will try it, but my ANE is running chinese Oreo, so I must rebrand it, upgrade to Pie etc., it will take a while...
-Alf- said:
Okay, I will try it, but my ANE is running chinese Oreo, so I must rebrand it, upgrade to Pie etc., it will take a while...
Click to expand...
Click to collapse
successfully installed lineage-16.0-20201228-nightly-anne-signed (on 9.1.0.132 ,( .132 Service ROM I have on SD Card atm) . No bootloop, no restart, everything works. Used the same TWRP, same guide . So you are doing something wrong. Have you downgraded to the lower build number?
(This might be simply due to the incompatible build number).
-Alf- said:
No bootloop, no restart, everything works. Used the same TWRP, same guide . So you are doing something wrong.
(This might be simply due to the incompatible build number).
Click to expand...
Click to collapse
i guess yeah but i wonder what tho
-Alf- said:
Have you downgraded to the lower build number?
Click to expand...
Click to collapse
yeah i was downloading a rom from that AndroidHost.ru wich took a long time (3.5GB took 6 hours for some reason)
if you dont mind can you upload the emui rom you used so i have the same starting point (or the link where you got it)?
docxgames said:
or the link where you got it)?
Click to expand...
Click to collapse
Link
Try download early morning.
Btw, how badly do you need Lineage 16.0? If you want to use it as your daily driver, go back to Oreo and try LOS 15.1
LOS-15.1-hi6250
yeah i want to use it for daily use
so why would i be better off with 15.1 compared to 16.0?
edit: (i just succeeded into succecfully installing 16.0
ty for the help) it broke after first boot as soon as i swipe to unlock i get only a block screen
still interested as why 15.1 would be better
docxgames said:
why would i be better off with 15.1 compared to 16.0?
Click to expand...
Click to collapse
15.1 is based on Android 9, appears to be stable and well-supported.
docxgames said:
yeah i want to use it for daily use
so why would i be better off with 15.1 compared to 16.0?
edit: (i just succeeded into succecfully installing 16.0
ty for the help) it broke after first boot as soon as i swipe to unlock i get only a block screen
still interested as why 15.1 would be better
Click to expand...
Click to collapse
IDK about your device , but i think the fixes are
Booting into recovery , Flash magisk (V21 atleast)
Stuck at boot animation ? , Flash Disable-Dm-verity-Force-encrypt
These were tested on SM-J8 , so idk how good they work , still they are common files , so it should help
ty guys i'll try this next time.
Related
Hi!
Just wanted to publish here the CR-DROID-ROM for our beloved Xiaomi Redmi 3/Pro.
Note:
I'm only the publisher, not the maintainer of this ROM. While you can post bug-reports here, they cannot be fixed by me.
Description from the dev-site:
This is a free AOSP / CyanogenMod Android based ROM bringing a lot of custom features ported from AOSPA, SlimRoms, OmniRom and many others great roms out there
crDroid brings what Android have of most advanced in terms of customization and stability.
Click to expand...
Click to collapse
The dev-site at Google+:
https://plus.google.com/communities/118297646046960923906
LINKS:
DOWNLOAD-LINK for crDroid with standard-kernel (hosted at Mega.nz)
DOWNLOAD-LINK for crDroid with DT2W-kernel (hosted at Mega.nz)
WHOLE DOWNLOAD-FOLDER (with older versions)
New Revision is out:
Xiaomi Redmi 3/Pro ROM CR-Droid 7.1.2 V3.8.3 Official-Build 2017-11-25
Just flash with with any version of Open-Gapps 7.1 (ARM64) (I recommend to use "Pico") and Magisk.zip. Don't forget to install the app "Magisk-Manager"!
Credits go out to Bondstas (UA) for generating this ROM.
P.S.:
The thread will be updated from time to time if I notice, that a new version of CR-Droid is out.
Update-history:
15-08/2017: CR-Droid V3.7 from 15-08/2017 is out!
25-08/2017: CR-Droid V3.7 from 15-08/2017 with DT2W-kernel added!
11-10/2017: CR-Droid V3.7 from 09-10/2017 is out!
14-10/2017: CR-Droid V3.7 from 09-10/2017 with DT2W-kernel added!
18-11/2017: CR-Droid V3.8.2 from 01-11/2017 is out!
31-01/2018: CR-Droid V3.8.3 from 25-11/2017 released!
01-02/2017: CR-Droid V3.8.3 from 25-11/2017 with DT2W-kernel added!
Thanks a lot!
Another ROM for our Redmi3!
crDroid V3.7 from 15-08/2017 is released! - Download see 1st post!
Is this the same with bondstas build ?
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
No, I think it's the one from Winkarbik.
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
frankonia said:
No, I think it's the one from Winkarbik.
Click to expand...
Click to collapse
but, the rom size is the same
Ok, then you are probably right. I have it from 4PDA.
ABDZR_43 said:
but, the rom size is the same
Click to expand...
Click to collapse
The best way is by calculating md5 checksum of zips.
Sent from my Redmi Note 4 using XDA Labs
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
You must have a focaltech panel. https://forum.xda-developers.com/showpost.php?p=68344933&postcount=493
3.6 https://mega.nz/#!35AVQKRR!M5b72YaeK9vv0JMs0x-iZupP93KVKofP8095JJ3GL2A
3.7 https://mega.nz/#!vlpUAbCY!yWF15BcwyKVGB1X4TxF3bWoZPiXNRFbKIHWn6zNxNI4
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
I took a look in the "About"-menue: Under "Kernel-version" stands "3.10.107-lineageos.... winkarbik@ubuntusrv #1"
So this ROM is from WinKarbik.
double-post => deleted!
tripper22 said:
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
Click to expand...
Click to collapse
I inserted the DT2W-kernel to the main ROM-file. Download-link in the first post!
This ROM has problem with Xposed making phone unbootable.
I tried two other ROMs (Lineage and AICP) which don't have the problem.
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
JOLLYNERY said:
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
Click to expand...
Click to collapse
Excuse me in advance for going OT but before trying to install custom roms, have you tried to flash global version of MIUI that is bundled with most of world languages and can fit your needs: it has got working google play, not a single china app and is working fairly well in all parts. It can be easily flashed on locked bootloader as well using miflash tool, a windows 64 bit system and putting the phone in download mode.
You can find most of informations here http://en.miui.com/thread-228048-1-1.html
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
JOLLYNERY said:
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
Click to expand...
Click to collapse
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
ivanhoe1976 said:
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
Click to expand...
Click to collapse
lemme try it out bro, thanks alot.
JOLLYNERY said:
lemme try it out bro, thanks alot.
Click to expand...
Click to collapse
Guys it didn't work out for. I tried updating through updater but it didn't. Then through pc, it didn't respond. Says I am not allowed to update to any other ROM that is, not a STABLE.
I would b grateful if u assist.
Thanx
ivanhoe1976 said:
if you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in twrp (immediately after you flash twrp i mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: This will patch boot.img and you will have a "permanent" twrp that won't go away at first system restart. Now you can install supersu or any custom rom you want to try without any problem! Now, after much time on miui 8, i'm on los 14.1, but i've tried many other custom roms, each of one was stable and good for daily use except aex which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. Cr-droid is very good as well!
Click to expand...
Click to collapse
it didnt work out. It requested i can only update with stable rom. Because i tried updating with global dev rom . I might just trash this fone
Orginal post:
https://www.google.pl/amp/s/forum.x...lopment/experimental-phh-treble-t3709659/amp/
Downolad Version V10:
With gapps and Su:
https://androidfilehost.com/?fid=746010030569954763
Without gapps and Su
https://androidfilehost.com/?fid=673956719939820512
Installation:
- First, you MUST be running a stock Android 8.0 ROM.
- Obviously, unlock your bootloader
- Download the correct system.img variant (see list of devices above, and dowload links below)
- Flash the system.img
- Do a Factory reset
- Reboot
What nor working?
- Broken camera because DRM KEY...
But all probably work pretty good!
For Xperia XZ1 and XZ1 COMPACT FLASH ONLY A version!!
Changeleog
v10: (2018-02/18)
- Android 8.1 !
- Includes versioned vndk, so devices running both 8.1 and 8.0 should work.
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Idk i not test this because my phone go to repair. I think camera not work on all apk. Because drm key broken but i don't know on 100%.
ok I will try it
eggimong said:
ok I will try it
Click to expand...
Click to collapse
Give screen plz. I will add on #1 post. And thank u!
i stuck on bootloop..
i flashed the file include su and gapps on 47.1.A.12.75. it stuck at sony boot logo then i flashed nosu and it stuck at boot animation
then i downgraded xz1 on 47.1.A.8.49 and flashed both but same result
i am not good at english :/
eggimong said:
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Click to expand...
Click to collapse
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
snake218 said:
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
Click to expand...
Click to collapse
you're right I installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. it works hdr+!
eggimong said:
you're right i installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. It works hdr+!
Click to expand...
Click to collapse
but their are limitation from sony like back cemra is set to 17 mp and iso set to 800 only they are in kernel i am working on it i am now learning kernel patching i have not done before lets hope for best
You can use TWRP brush into it？
V11 released
who can test that version?
I'll give it a shot
Download link?
N1ghtr08d said:
Download link?
Click to expand...
Click to collapse
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Redcalibur said:
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Click to expand...
Click to collapse
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
N1ghtr08d said:
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
Click to expand...
Click to collapse
Hey, I'm asking this just to be sure that we can consider the rom incompatible for our device.
You used the rom that said A-only, right? Since the thread states that the XZ1 only supports build A-only. If so, we could try mentioning the issues you experienced in the original thread.
Thank you for your time.
Edit: I've just seen your posts in the original thread. Sorry for the quote.
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
I had the same experience with all A-only versions.
N1ghtr08d said:
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
Click to expand...
Click to collapse
try this version, for me on xz1c it loads to the inscription of "xperia", and it hangs https://drive.google.com/open?id=118pwXm2UK95AaYTvIfDAiWDBk-rUBh6Q
Infinite restart animation………………cnm?
Project Treble made it possible to install LineageOS on a P10 running on Oreo (not mine, yet). More info on the Honor View 10 forum: https://forum.xda-developers.com/honor-view-10/development/rom-lineageos-15-1-t3753000/post75665202
This sounds amazing. Will have to try over the weekend if I get time.
if i have time later tonight ill give it a try but i don't think that'll work bc i'm on 7.1 and i haven't gotten the update for oreo on mine vtr-l09
D4XT3R said:
if i have time later tonight ill give it a try but i don't think that'll work bc i'm on 7.1 and i haven't gotten the update for oreo on mine vtr-l09
Click to expand...
Click to collapse
Yes that's what I'm also wondering because I have an VTR-L09 and haven't gotten an update for Oreo yet and I kinda wanna try this but don't wanna brick my device
P10 Plus can also be used
with no root BOOT, I was flashed the system.
Wahoooo said:
with no root BOOT, I was flashed the system.
Click to expand...
Click to collapse
Were you on EMUI 8 before you flashed this?
Is there a way to get the fingerprint gestures working as in emui?
i'm now on emui 8.0 and i haven't updated to lineage 15.1.. but i don't think that i'll be the first one to do it i don't want to brick my phone
I just installed AOSP version from 4PDA forum ist 64 bit version oreo 8.1 instalation trought adb fastboot,manual system.img flash.Working but have many bugs,fast charging not work,aosp camera crash external camera app working well,many apps crashing like facebook,wats app.Not able to use for daily device.Lineage and RR also avaible.I will test later.
Now tested lineage os,it work perfectly all apps working,camera working,I will use as daily phone now.
x1988 said:
Now tested lineage os,it work perfectly all apps working,camera working,I will use as daily phone now.
Click to expand...
Click to collapse
What about the camera quality?
It bad than stock rom,just because aosp camera not using second monochrome sensor,later i will try with default huawei camera app, from stock rom
x1988 said:
It bad than stock rom,just because aosp camera not using second monochrome sensor,later i will try with default huawei camera app, from stock rom
Click to expand...
Click to collapse
What system image did you use for the P10?
Friends I am a little new in this roms for huawei p10 but I would like to know if you can install linage os 15.1 for huawei p10 and how can I do it. Thank you
Does LTE works without problems?
DarkPJV said:
Friends I am a little new in this roms for huawei p10 but I would like to know if you can install linage os 15.1 for huawei p10 and how can I do it. Thank you
Click to expand...
Click to collapse
Follow the link in the OP. Basically you replace the system.img.
M1chiel said:
Follow the link in the OP. Basically you replace the system.img.
Click to expand...
Click to collapse
But it works correctly for my huawei p10. I do not want to ruin my phone You already proved it in huawei p10. Thank you very much for answering
So I have it installed and it boots. The issue I keep encountering is with Google Services Framework popping up all the time, so I can't get past the setup screen. Anyone have any ideas?
EDIT: Never mind. Just installed stock recovery and did a dalvik cache wide/format. Up and running!
MrDanMak said:
So I have it installed and it boots. The issue I keep encountering is with Google Services Framework popping up all the time, so I can't get past the setup screen. Anyone have any ideas?
EDIT: Never mind. Just installed stock recovery and did a dalvik cache wide/format. Up and running!
Click to expand...
Click to collapse
Can u show some screenshots please?
berka38 said:
Can u show some screenshots please?
Click to expand...
Click to collapse
Sure thing. Attached.
[continuation of title]
And this is my way of trying to contact him about His pixel experience Project which He seems to be Working on
So If you read this
Please provide information so that we can contact you
Thx in advance! (If read)
Some random said:
[continuation of title]
And this is my way of trying to contact him about His pixel experience Project which He seems to be Working on
So If you read this
Please provide information so that we can contact you
Thx in advance! (If read)
Click to expand...
Click to collapse
NO luck,stuck at G logo :crying:
lookmanns said:
NO luck,stuck at G logo :crying:
Click to expand...
Click to collapse
Me 2
Even with A CRAP TON
Of patches
Some random said:
Me 2
Even with A CRAP TON
Of patches
Click to expand...
Click to collapse
btw I found this dev in galaxy s2 plus forum,and his name is ud4
lookmanns14 said:
btw I found this dev in galaxy s2 plus forum,and his name is ud4
Click to expand...
Click to collapse
Oh
Nice!
UPDATE:
I was able to contact him and got an answer
He stated that he did not have an Xperia x to test this ROM
But told that I could test and send feedback if it works or not.
Maybe you can write a PM asking if you can test too! (Anyone who reads this can ask!)
This whole thing feels weird.
On first flash, recovery says the ROM was created by jhenrique09, who is an official maintainer of PE. But after searching both jhenrique09 and PE's official Github, there's no sign of suzu on the list. I'm assuming this is a port. This brings us to another problem.
A quick look at the file name reveals this ROM is based on 4.4 kernel. As far as I know, there is no Pie ROM out there that is using 4.4 kernel (Chippa_a's LOS uses 3.10, Omni and Treble uses 4.9). The closest thing I could think of is Omni 8, but why port a Pie ROM using an Oreo base?
Lastly, who would make a ROM for a phone they don't have?
iH8Ecchi said:
This whole thing feels weird.
On first flash, recovery says the ROM was created by jhenrique09, who is an official maintainer of PE. But after searching both jhenrique09 and PE's official Github, there's no sign of suzu on the list. I'm assuming this is a port. This brings us to another problem.
A quick look at the file name reveals this ROM is based on 4.4 kernel. As far as I know, there is no Pie ROM out there that is using 4.4 kernel (Chippa_a's LOS uses 3.10, Omni and Treble uses 4.9). The closest thing I could think of is Omni 8, but why port a Pie ROM using an Oreo base?
Lastly, who would make a ROM for a phone they don't have?
Click to expand...
Click to collapse
IT seemed kindof fishy to me too but....well....it kind of boots
We could try an android 8.1 OEM file and see if it boots
Some random said:
IT seemed kindof fishy to me too but....well....it kind of boots
We could try an android 8.1 OEM file and see if it boots
Click to expand...
Click to collapse
If not.....extract kernel and see what's wrong I guess
Some random said:
IT seemed kindof fishy to me too but....well....it kind of boots
We could try an android 8.1 OEM file and see if it boots
Click to expand...
Click to collapse
it will not boot with android 8.1 an 9 oem..you just got infinity restart
I think oem already include in this rom,you can check oem file after flash the rom in /root/oem using twrp file manager
Someone needs to take some logs without patches of any sort
On the 4.4 kernel Version
(Got private message about this 45 minutes ago)
Hi everyone, I've been trying to find a custom rom for Xiaomi Mi 12X, but none found so far. I tried to port Pixel Experience rom using the Xiaomi Mi 11X (alioth) device tree and changed accordingly, since the SOC and almost all specs are the same except Camera. Can anybody shed some light in how to correctly port the ROM for my devices without official device tree from LineageOS or Pixel Experience? Thank you.
Anybody has any suggestions?
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Voodoojonny said:
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Click to expand...
Click to collapse
Thank you but I don't see it on crdrood website, did you build it yourself?
JChanMe said:
Thank you but I don't see it on crdrood website, did you build it yourself?
Click to expand...
Click to collapse
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Voodoojonny said:
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Click to expand...
Click to collapse
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
JChanMe said:
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
Click to expand...
Click to collapse
Yes, especially the sound makes problems... When usung videocall, it's awfully distorted. I'm using stock for now. With Lawnchair and some modifications it's ok for now.
Do you know, why there's no thread for our phone here?
Just seen, you are forking some repositories... Have you been successful in building?
Voodoojonny said:
Just seen, you are forking some repositories... Have you been successful in building?
Click to expand...
Click to collapse
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
JChanMe said:
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
Click to expand...
Click to collapse
Did you flash with vendor or system only?
Voodoojonny said:
Did you flash with vendor or system only?
Click to expand...
Click to collapse
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
JChanMe said:
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
Click to expand...
Click to collapse
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Voodoojonny said:
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Click to expand...
Click to collapse
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
JChanMe said:
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
Click to expand...
Click to collapse
But you used the lineage device tree. And PE is aosp not lineage. Might that be the problem? Would you try to build crdroid? Or instruct me how to setup a build environment?
No, I used the PE device tree, not Lineage. I used the build instructions provided by Pixel Experience for Alioth.
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Maxletsplay_1 said:
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Click to expand...
Click to collapse
Didn't they release the kernel when the phone was released?
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Technically yes, but i've checked GitHub(about month ago) and I didn't saw kernel for this phone, just an empty folder
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Did you replaced vendor libs with libs from 12x and other stuff like fstab, bins, rc files..configs? Attach logs from boot if you decide to build again. My advice is to build as eng and disable encryption, put selinux to minimal mode, nuke livedisplay, import vendor modules if you build with stock prebuilt kernel. Always look for F Linker errors in log and resolve them.
I'm waiting for AOSP rom too.