Hi,
I have unlocked my bootloader officially through the unlock tool and wanted to flash a custom recovery and also root my device (Redmi Note 3 - Snapdragon).
I was on Global Dev (6.5.19) before I even started to unlock my bootloader.
After unlock, I was succesffuly able to flash Cofface TWRP recovery through fastboot (well the command prompt didn't throw up any errors and had a success message).
However, when i reboot into recovery (either through button combination or "adb reboot recovery", I just get a screen that shows an image of a phone and USB cable" (similar to the image on the official bootloader unlock tool.
I checked whether the bootloader was unlocked (fastboot oem device-info) and it was indeed unlocked.
I have factory reset and reflashed 6.5.19 (Global dev rom) with MiFlash and this hasn't made any difference.
I also relocked the bootloader with MiFlash Beta and then unlocked successfully with the official unlock tool.
All of these steps still haven't made a difference.
Can someone please advise on the next step to do (as unlocked bootloader is pretty useless if I can't install a custom recovery).
P.S. I also get the same phone and usb cable image when booting into stock recovery
find it weird problem
if you dont,then first just boot the recovery
code:- fastboot boot xxxrecovery.img where xxxrecovery replace your own recovery img name in fastboot folder.
you must success and see twrp recovery
then again transfer img to sdcard and to flash from recovery.
then flash it from recovery and when you reboot ,just swipe to diseable rom to replace it with stock one.
find it really weird ,i did it hundredths of time in my offi unlocked and every time goes fine flashing recovery from fastboot
Hit thanks if i helped
please follow this... it does help for me.
http://forum.xda-developers.com/showpost.php?p=67636917&postcount=32
Thanks very much! These instructions solved my issue
mra1n1 said:
Thanks very much! These instructions solved my issue
Click to expand...
Click to collapse
I have the same problem .How u solved your problem?
You can easily flash this one ZCX Twrp. Is the best i didn`t encountered any issue until now. I`ve flashed custom roms and miui roms as well.. The install process is very simple, follow this one https://forum.xda-developers.com/redmi-note-3/how-to/zcx-twrp-install-twrp-flash-supersu-t3462448
Pretty inexperienced with Andriod after taking the leap from IOS.
Rooted my honor 7 using Kingoroot everything worked fine then I let me phones battery die whilst at work came home to charge it up and now it's stuck in a boot loop/honor screen.
So far I have tried to let it automatically download the ROM using the EMUI recovery that fails completely.
I tried using HiSuite to recover that gets to 90% then gets stuck.
Finally I have tried every single honor 7 ROM i can find in an attempt to install via SD card every time I have it tells me version check fail.
Only had the phone couple of months anything I can do to recover it/repair?
Many thanks
Markus
did you unlock bootloader before rooting? you could use adb to flash stock rom....
next time dont follow youtube guides titled "how to root any android phone", on android theres way bigger change to bootloop or brick your device while messing with root, custom recovery and custom roms than on iOS. in this thread you will have all info beginner needs about honor 7 rooting, fixing and customizing: https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
thelous said:
did you unlock bootloader before rooting? you could use adb to flash stock rom....
next time dont follow youtube guides titled "how to root any android phone", on android theres way bigger change to bootloop or brick your device while messing with root, custom recovery and custom roms than on iOS. in this thread you will have all info beginner needs about honor 7 rooting, fixing and customizing: https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
Click to expand...
Click to collapse
Thanks for the reply and no I did not as I wasn't aware it needed to be done however in fastboot it says Phone Unlocked and the fastboot oem get-bootinfo also says (bootloader) unlocked.
Yet I am still unable to to flash as Command not allowed is appearing when I try.
I have tried following the guide to aquire my unlock password from the huawei site how ever it tells me my details i.e serial number and imei are incorrect.
Really appreciate the help , thank you
Markus
markuswhiteus said:
Thanks for the reply and no I did not as I wasn't aware it needed to be done however in fastboot it says Phone Unlocked and the fastboot oem get-bootinfo also says (bootloader) unlocked.
Yet I am still unable to to flash as Command not allowed is appearing when I try.
I have tried following the guide to aquire my unlock password from the huawei site how ever it tells me my details i.e serial number and imei are incorrect.
Really appreciate the help , thank you
Markus
Click to expand...
Click to collapse
i think rooting app unlocked it wrong(caused bootloop) and messed something up....
Get the B380 update from Honor site and do a forced update ( if you've already been on B380).
It should work after that.
Sebster97 said:
Get the B380 update from Honor site and do a forced update ( if you've already been on B380).
It should work after that.
Click to expand...
Click to collapse
Tried that get a version check fail.
btw did you install xposed? it doesnt work on emui... just bootloops
What version are you current on? B380?
I assume that this KingoRoot thing messed up your SYSTEM Partition and thats why it bootloops. To fix this do this:
If you're on B380, go and get the B380 full update from the official Honor site and extract it so that you can see the UPDATE.APP file.
Then get the Huawei Update extractor from here : https://forum.xda-developers.com/showthread.php?t=2433454
Open it and extract the SYSTEM.img and the BOOT.img
If you are familiar with adb do this: (if not, ask what to do)
copy SYSTEM.img to your adb folder. Connect your phone in fastboot mode, and enter in cmd: "fastboot flash boot boot.img"
and after its done:
"fastboot flash system SYSTEM.img" (everything without quotation marks obviously)
It will take some time, be patient. If it's done just write: fastboot reboot
and lets hope it works for you !
Sebster97 said:
What version are you current on? B380?
I assume that this KingoRoot thing messed up your SYSTEM Partition and thats why it bootloops. To fix this do this:
If you're on B380, go and get the B380 full update from the official Honor site and extract it so that you can see the UPDATE.APP file.
Then get the Huawei Update extractor from here : https://forum.xda-developers.com/showthread.php?t=2433454
Open it and extract the SYSTEM.img and the BOOT.img
If you are familiar with adb do this: (if not, ask what to do)
copy SYSTEM.img to your adb folder. Connect your phone in fastboot mode, and enter in cmd: "fastboot flash boot boot.img"
and after its done:
"fastboot flash system SYSTEM.img" (everything without quotation marks obviously)
It will take some time, be patient. If it's done just write: fastboot reboot
and lets hope it works for you !
Click to expand...
Click to collapse
Tried that gota wait for the unlock code to flash the ROM on and no I never used xposed
We Want MSM tool for Realme XT stock rom .ofp file flashable
Please help after relocking bootloader boot image destroyed can't boot error
naandha114 said:
Please help after relocking bootloader boot image destroyed can't boot error
Click to expand...
Click to collapse
Chill, most of us see this when we wipe and install cutsom rom...
Download the following
1) TWRP for XT
2)OZIP stock rom for XT from relame site
Now flashing steps
3)Use commands in bootloader
fastboot devices --> check its detected
fastboot flash recovery recovery,img --> where recovery.img is the TWRP image file
now use volume button to boot into recovery
4) in recovery choose options wipe
wipe cache,system,vendor,data
also use Format data and select yes to wipe out data
5) reboot to recovery
6) now using a ozip file from pendrive or SD card flash it..enjoy stock rom
Im writing this as there is no guide in this forum for above issue to recover
Regards,
Diaz Michael
diazneoones82 said:
Chill, most of us see this when we wipe and install cutsom rom...
Download the following
1) TWRP for XT
2)OZIP stock rom for XT from relame site
Now flashing steps
3)Use commands in bootloader
fastboot devices --> check its detected
fastboot flash recovery recovery,img --> where recovery.img is the TWRP image file
now use volume button to boot into recovery
4) in recovery choose options wipe
wipe cache,system,vendor,data
also use Format data and select yes to wipe out data
5) reboot to recovery
6) now using a ozip file from pendrive or SD card flash it..enjoy stock rom
Im writing this as there is no guide in this forum for above issue to recover
Regards,
Diaz Michael
Click to expand...
Click to collapse
Can't boot into fastboot
naandha114 said:
Can't boot into fastboot
Click to expand...
Click to collapse
Did you try with Vol down + power button option for fastboot ?
If your fastboot is broken you would need to go service center to hard flash them
Regards,
Diaz Michael
Unbrick realme XT with MSM tool
Hi friends,
I recently tried to unlock bootloader of Realme XT running on Android 10, Realme Ui.
I successfully unlocked the bootloader with official method and I installed Twrp. Now comes the issue, after 1st reboot, the Twrp was replaced by stock recovery, so I again tried to flash, but there was write error and I couldn't flash back using adb.
Now, the mistake, so I thought why not to repeat the same process again, that is again locking the bootloader and repeating all the steps. I forgot the I shouldn't do it with adb and use the official method.
I put the command in adb to relock bootloader and my bootloader crashed saying it's destroyed. I couldn't get into recovery nor fastboot with any of the method. After doing a lot of research I found the MSM tool for flashing with the crack but it didn't serve the purpose.
Afterwards, I took remote help of one of service person paid him online, he also used MSM tool, but he was having username and password, and one my realme XT again started working.
The day I am able to use MSM tool in cracked condition will be able to take risks of rooting again.
Thanks for listening to the story.
Regards,
Tausif Sayyed
tausif55555 said:
Hi friends,
I recently tried to unlock bootloader of Realme XT running on Android 10, Realme Ui.
I successfully unlocked the bootloader with official method and I installed Twrp. Now comes the issue, after 1st reboot, the Twrp was replaced by stock recovery, so I again tried to flash, but there was write error and I couldn't flash back using adb.
Now, the mistake, so I thought why not to repeat the same process again, that is again locking the bootloader and repeating all the steps. I forgot the I shouldn't do it with adb and use the official method.
I put the command in adb to relock bootloader and my bootloader crashed saying it's destroyed. I couldn't get into recovery nor fastboot with any of the method. After doing a lot of research I found the MSM tool for flashing with the crack but it didn't serve the purpose.
Afterwards, I took remote help of one of service person paid him online, he also used MSM tool, but he was having username and password, and one my realme XT again started working.
The day I am able to use MSM tool in cracked condition will be able to take risks of rooting again.
Thanks for listening to the story.
Regards,
Tausif Sayyed
Click to expand...
Click to collapse
That great man
Please can help other who has problem
{Mod edit: Quoted post deleted}
Is there a contact in the telegram?
sergpolov said:
{Mod edit: Quoted post deleted}
Is there a contact in the telegram?
Click to expand...
Click to collapse
Can you send me the contact please
locuas0130 said:
can you send me the contact please
Click to expand...
Click to collapse
+**************************************
Obs: these were the steps that i did to get it, try it by your own risk
----------------------update------------------------
Some people are saying that can't get the 11.1.021 via ota from zui10, but I got the information that this version of qfil 11.1.021 is getting ota to the 11.5, so you should try it just changing the files in the tutorial of step 1 and if don't get the ota, jump to the step 3
-------------------------------------------------------
I did the first part with my bootloader locked, and just got it working this way. I tried to qfil directly the 11.1.021 or use the version updated with the bootloader unlocked but i got error 7 later.
To start, you will need adb and fastboot, and you can get them from here
1- Qfil the zui 10 version from this tutorial
2- Set up a pin (it will be important) and update the zui to version 11.1.021 (right after you install the zui 10 it will pop the update, if not you can use the zui update app)
3- Now that you have 11.1.021 from ota you have to go to fastboot mode (adb reboot bootloader) and unlock your bootloader, if you do this on zui 10 or zui 11.5 you will got on bootloop and have to start all again (tutorial <- you can use this to lock your bootloader for start the proccess too)
4- Go again to bootloader and use fastboot flash recovery twrp.img (download twrp)
5- From fastboot mode, press volume down repeatly until you see "Recovery mode" then press power button, the phone will reboot twice and enter in twrp, you will need to put the pin set on step 2
6- Pass this update zip to your phone from the PC then select it on "install" section and swipe to flash (this was the step where i got error 7 with qfil version of 11.1.021, if you got this, the only solution i know is start all over again owith qfil zui 10)
7- After flash is done, go back to the home page of twrp, select "wipe" and mark "dalvik", "cache" and "data" then reboot system
Your phone will be on bootloop and this is the part that i discover after 2 days trying
8- Turn off your phone and turn it back pressing the power button and the volume down to enter in fastboot mode, you will see on last line that your bootloader will be locked again, and this is the cause of bootloop
9- Use the commands to unlock bootloader again (fastboot flash unlock your_unlock_img.img and fastboot oem unlock-go)
Your phone will boot and reboot in twrp that will do an automatic process, than will reboot again in ZUI 11.5.141 (may take some minutes)
Obs²: After this proccess, if you want to use TWRP to install a rom or something, you will need to flash it again
when I try to install just I got error 7 for everstep :S how can I solve it ?
brujaboy said:
when I try to install just I got error 7 for everstep :S how can I solve it ?
Click to expand...
Click to collapse
Did you try it from qfil the zui 10 with the locked bootloader?
Because i got this error when i ota updated from 10 to 11.1.021 with the bootloader unlocked
Astronomico said:
Did you try it from qfil the zui 10 with the locked bootloader?
Because i got this error when i ota updated from 10 to 11.1.021 with the bootloader unlocked
Click to expand...
Click to collapse
yes I did my friend I installed zui10 with QFIL after that I ınstalled 11.0.21 with twrp and when I try to install 11.5 I got error 7, I did edit with notepad++ but still have this problem
brujaboy said:
yes I did my friend I installed zui10 with QFIL after that I ınstalled 11.0.21 with twrp and when I try to install 11.5 I got error 7, I did edit with notepad++ but still have this problem
Click to expand...
Click to collapse
I think the problem is with the version you're installing in TWRP , after qfil zui10, wait for the OTA for 11.1.021 of the app zui update, it seems to exist some versions of 11.1.021 and the TWRP version is not the same of the OTA
The version of 11.1.021 that i've got by OTA with my bootloader already unlocked on zui10 got error 7 too, just the version i've got with the bootloader locked worked
Astronomico said:
I think the problem is with the version you're installing in TWRP , after qfil zui10, wait for the OTA for 11.1.021 of the app zui update, it seems to exist some versions of 11.1.021 and the TWRP version is not the same of the OTA
The version of 11.1.021 that i've got by OTA with my bootloader already unlocked on zui10 got error 7 too, just the version i've got with the bootloader locked worked
Click to expand...
Click to collapse
we need wait thank u bro
Microsoft Windows [Version 10.0.18362.657]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot> adb reboot bootloader
error: no devices/emulators found
C:\Program Files (x86)\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
Fixed
this is whilest in fastboot.. ^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 4951729
it pushes a command when phone was on but when in fastboot / bootloader nothing ? any ideas?
Fixed
every time i push recovery img twrp via ADB it gets bootloader loop
leerh said:
every time i push recovery img twrp via ADB it gets bootloader loop
Click to expand...
Click to collapse
That's weird, i've uploaded the same img i used on mine smartphone, it reboot twice, but starts after in my case, i just got bootloop after unlock the bootloader, but never after flash the twrp...
Try to turn your phone on holding the vol down button to enter in fastboot and check if it's really unlocked, since you flashed the twrp, you will need it
Btw, try to use the files of this tutorial
Astronomico said:
That's weird, i've uploaded the same img i used on mine smartphone, it reboot twice, but starts after in my case, i just got bootloop after unlock the bootloader, but never after flash the twrp...
Try to turn your phone on holding the vol down button to enter in fastboot and check if it's really unlocked, since you flashed the twrp, you will need it
Btw, try to use the files of this tutorial
Click to expand...
Click to collapse
yhyh it says device is unlocked ive used unlock image from lenovo site to unlock it.
im currently on 11.1.021 st cant install twrp affter installing keeps booting to bootloader (unlocked) from here i will need to use qfill to get stock firmware 10.5.304 cn version stock recovery still works
ive also tried on ZUI_10.5.304 same thing
qill emergency flash dose not lock bootloader for me? well i cant twrps anymore makes me feel its step away from total brick
do i need to lock it then qfill then 11.1.021st via OTA then unlock it
I've Just googled It and i found that flash magisk could repair the twrp bootloop, because magisk changes the boot.img that is the cause of the problem
You can download It on magiskmanager site, put it on your phone, than use twrp install session to flash it
And Qfil doesn't Lock your bootloader
Astronomico said:
I've Just googled It and i found that flash magisk could repair the twrp bootloop, because magisk changes the boot.img that is the cause of the problem
You can download It on magiskmanager site, put it on your phone, than use twrp install session to flash it
And Qfil doesn't Lock your bootloader
Click to expand...
Click to collapse
thanks for looking into it for me and i will try this out now and let you know the results done.
this a fresh from factory flash so there is no magisk modules. can you post the links to the information you found.. i cant flash any files affter installing twrps which is successful the via ADB but affter the reboot or trying twrps or access phone or recovery will bootloop my phone to go into fast boot every single time...
can i install twrps on 10.304 and 11.021 both are offical cn roms? device has to be unlocked right which it is? is there any place i can get stock recovry image?
i wanna try= fastboot flash boot_a stockboot.img=fastboot flash boot_b stockboot.img
but i dont think i should as qfil provides stock factory flash? means its fully fresh?
leerh said:
thanks for looking into it for me and i will try this out now and let you know the results done.
this a fresh from factory flash so there is no magisk modules. can you post the links to the information you found.. i cant flash any files affter installing twrps which is successful the via ADB but affter the reboot or trying twrps or access phone or recovery will bootloop my phone to go into fast boot every single time...
can i install twrps on 10.304 and 11.021 both are offical cn roms? device has to be unlocked right which it is? is there any place i can get stock recovry image?
i wanna try= fastboot flash boot_a stockboot.img=fastboot flash boot_b stockboot.img
but i dont think i should as qfil provides stock factory flash? means its fully fresh?
Click to expand...
Click to collapse
Oh, i thought you could access the twrp after install it, sorry
The tutorial on step 1 provides the official cn rom zui10, if you use it, your phone will probably boot normally.
I think you should lock your bootloader and use the official, you will have the updates via OTA, since you can't use TWRP, I think it will be the best for you, I don't know how help you more :/
I have a request anyone can share with my twrp back up clear update without data like zip file because I have problem with my QFIL and when I try to install zui 10.5 give me sahara error and I thought about this option
brujaboy said:
I have a request anyone can share with my twrp back up clear update without data like zip file because I have problem with my QFIL and when I try to install zui 10.5 give me sahara error and I thought about this option
Click to expand...
Click to collapse
Sorry, i didn't see it, but saraha error is probably caused because wrong version of USB drivers in your PC, or you're being too slow to press "download content" on qfil after plug the phone (I don't know exactly why, but you have to click it fairly fast)
Astronomico said:
Sorry, i didn't see it, but saraha error is probably caused because wrong version of USB drivers in your PC, or you're being too slow to press "download content" on qfil after plug the phone (I don't know exactly why, but you have to click it fairly fast)
Click to expand...
Click to collapse
doesn't matter, thank u so much for replying yesterday I installed all of driver versions but I saw still again and I find another method like pushing very fast download click button and I did successfully 11.1.021 thank u so much again for supporting
Astronomico said:
Obs: these were the steps that i did to get it, try it by your own risk
I did the first part with my bootloader locked, and just got it working this way. I tried to qfil directly the 11.1.021 or use the version updated with the bootloader unlocked but i got error 7 later.
To start, you will need adb and fastboot, and you can get them from here
1- Qfil the zui 10 version from this tutorial
2- Set up a pin (it will be important) and update the zui to version 11.1.021 (right after you install the zui 10 it will pop the update, if not you can use the zui update app)
3- Now that you have 11.1.021 from ota you have to go to fastboot mode (adb reboot bootloader) and unlock your bootloader, if you do this on zui 10 or zui 11.5 you will got on bootloop and have to start all again (tutorial <- you can use this to lock your bootloader for start the proccess too)
4- Go again to bootloader and use fastboot flash recovery twrp.img (download twrp)
5- From fastboot mode, press volume down repeatly until you see "Recovery mode" then press power button, the phone will reboot twice and enter in twrp, you will need to put the pin set on step 2
6- Pass this update zip to your phone from the PC then select it on "install" section and swipe to flash (this was the step where i got error 7 with qfil version of 11.1.021, if you got this, the only solution i know is start all over again owith qfil zui 10)
7- After flash is done, go back to the home page of twrp, select "wipe" and mark "dalvik", "cache" and "data" then reboot system
Your phone will be on bootloop and this is the part that i discover after 2 days trying
8- Turn off your phone and turn it back pressing the power button and the volume down to enter in fastboot mode, you will see on last line that your bootloader will be locked again, and this is the cause of bootloop
9- Use the commands to unlock bootloader again (fastboot flash unlock your_unlock_img.img and fastboot oem-unlock go)
Your phone will boot and reboot in twrp that will do an automatic process, than will reboot again in ZUI 11.5.141 (may take some minutes)
Obs²: After this proccess, if you want to use TWRP to install a rom or something, you will need to flash it again
Click to expand...
Click to collapse
Hi bro. I see a little error in your command: The second command in the 9th step is wrong, the correct command is: "fastboot oem unlock-go".
Greetings.
leerh said:
yhyh it says device is unlocked ive used unlock image from lenovo site to unlock it.
im currently on 11.1.021 st cant install twrp affter installing keeps booting to bootloader (unlocked) from here i will need to use qfill to get stock firmware 10.5.304 cn version stock recovery still works
ive also tried on ZUI_10.5.304 same thing
qill emergency flash dose not lock bootloader for me? well i cant twrps anymore makes me feel its step away from total brick
do i need to lock it then qfill then 11.1.021st via OTA then unlock it
Click to expand...
Click to collapse
i got step 1,2,3,4,5 and 6, got an error #7.
so i used the tutorial to flash the device in step 1
it was unable to update cuz bootloader was unlock
i locked bootloader and update to 11.1.021
so afther that, i unlocked again to install twrp.
intalled twrp and transfer file to phone
booted twrp and installed the zip, got the error 7 again.
lipeneiva said:
i got step 1,2,3,4,5 and 6, got an error #7.
so i used the tutorial to flash the device in step 1
it was unable to update cuz bootloader was unlock
i locked bootloader and update to 11.1.021
so afther that, i unlocked again to install twrp.
intalled twrp and transfer file to phone
booted twrp and installed the zip, got the error 7 again.
Click to expand...
Click to collapse
best thing is to try again an follow every letter and step this only way to install 11.5 (beta) did u set a pin it is needed ive not seen another guide to install android 10
Lombachita said:
Hi bro. I see a little error in your command: The second command in the 9th step is wrong, the correct command is: "fastboot oem unlock-go".
Greetings.
Click to expand...
Click to collapse
Ops, fixed