How to create scatter file for phone with MT G85? - Android Q&A, Help & Troubleshooting

Hello i need scatter file for redmi note 9, my phone is bricked rn. Trying to repair with sp tools but don't have scatter file for this phone.

Related

Problem auth file in Sp Flash Tool

Hello!
I have a bricked Meizu MX4 and when I try to flash the stock rom through SP Flash tools I always get the same error.
He requests for an "authentication file"
There is any way to make this authentication file?
Thanks!!
SP_Flash_Tool_v5.1648 Can do it!
There are two possible reasons why you are getting authentication problem
i)Incorrect VCOM Driver
Solution: Uninstall existing driver and then download Mobistel or Pda4Net
ii)Version of SP Flash Tool is too old
spflashtool.com
If it still doesnt work , the firmware you download is incorrect and is not supported by your device.
Cheers

sp flash tools s_da_sdmmc write failed

i have bricked MTK 6589 mobile phone of Gfive President G7 model made by china.
i tried to flash with the sp tool but got this error.
any guidance? support? clue?

Can someone provide me 'rawprogram0.xml' and 'patch0.xml'?

Hi guys,
My realme 3 pro is bricked and I'm trying to revive it through this guide:
https://www.getdroidtips.com/how-to...e-3-pro-firmware-flash-file/#Firmware_Details
The device gets seen by the software but I can't proceed because it asks to select rawprogram0.xml and patch0.xml and I can't locate them. This old guide says that they are extracted from the file 'partition.xml'.
https://www.reddit.com/r/nexus5x/comments/6v2uza/a_possible_fix_for_hardbricked_devices_but_we/
Any chance any of you can extract those 2 files to bring to life my Realme 3 Pro?
Thanks in advance.
I have this same problem on ZTE N9132 , all the stock room available online only has rawprogram0.xml in it and no patch0.xml file. I have over 10 Qualcomm flashing software and they need the patch file before I can flash and unbrick my device

{HELP} Oppo CPH1851 Bricked Need Help

My Oppo A5(AX5) CPH1851 bricked need to flash it i have chimera tool support flashing qualcomm HS-USB mode but need Programmer File (exmp: Programmer Firehorse msm8936.......mbn)
But this phone is SDM 450 and i cant find its programmer file.
anyone can give me a link for this file?
I need to unbrick my phone but i cant find its file
SDM 450 programmer file needed it end by (*.mbn/*.elf) format
I do have a copy of the firehose file that I believe should work, unfortunatly i have not been able to flash mine with QFIL, could you send me a link for the program you are using or any other helpful information as im trying to root/fastboot access mine

persist.img fingerprint

i tried to flash an ofp file following this guide:
[TOOL] Oppo/Realme Flash .OFP File on Bootloader
A tool to flash .ofp files in bootloader mode without needing MSM Tool, an alternative to official realme tool. THE DEVICE MUST HAVE THE BOOTLOADER UNLOCKED Features soft unbrick install stock firmware switch device region Credits...
forum.xda-developers.com
the phone worked fine but the fingerprint doesn't work anymore.
after looking it up i learned that the persist.img probably got damaged.
can someone provide me with a backup of the file?
so after looking it up turns out both the engineermode and fingerprint folders in "root/mnt/vendor/persist" are empty
if someone who has rooted their phone provided me with the persist folder i believe i can find a solution
Im having the exact problem after using that tool. found any solution yet?
nothing yet
i think the the solution at this point is taking it to the service center so they can flash it
I am having the same problem, but with Realme GT2 pro. Any solution other than service center?

Categories

Resources