Related
Hi mates,
since this evening, my Galaxy S2 (unbranded, unrooted, with stock firmware) was connecting fine with my PC in the "kies mode". I could use kies flawlessy, and I could regularly see my phone in my windows 7 (x86) explorer, and use explorer to read and write files from and to its memory.
Then, this evening, I got a notification, from kies, that an update (of kies) was available (2.0.2.11071.182.2), and I gave my consent to the updater. It did all its dirty job but after the installation of the new version, despite the phone connects via USB, every time I try to access the phone's memory from the PC, the connection drops. It restores backafer one second or two, but then again, if I try to access the phone's memory, it drops agains. The problem appears indifferently when accessing phone's memory from kies, and when doing it from windows' explorer, and this makes me suspect of the drivers, that the new version of kies brought along.
The phone connects correctly to the PC in the direct USB mode, and I can access its memory with no problem, and this also suggests that the problem should be the drivers.
So I uninstalled everything (new kies and drivers), and rebooted the PC, then I dowloaded what I believe is the previous version of kies: 2.0.1.11053.99.3, and launched its installation. After the end of the process, I rebooted the PC, just to be safe. According to the list of the installed software in my PC (in "Control Panel > Uninstall a program"), the drivers have rolled back, as expected, to version 1.3.2410.0 (before they were 1.4.something).
At the first connection of the phone to the PC after the reboot, I got notification from windows that the device installed correctly and it is ready to use (all the tree drivers are indeed reported as installed correctly)...
The point is that all this did not solve the problem at all, and USB connection still behaves exactly as badly as before.
I tried again uninstalling and reinstalling everything, also adding a manual clean up of the windows' registry from any entry related to "samsung", checking that the phone was not set in "USB debugging" mode, and disabling the antivirus, but despite everything appears to be fine, the phone regularly keeps on refusing to maintain USB connection alive everytime I try to access its memory.
What drives me mad is the fact that until this evening, everything was working flawlessly!
What else can I try????
I've just made a test on another PC running windows XP, with latest Kies 2.0.2.11071_128 installed. It's my office PC, and although I'm not 100% sure, I seem to remember that, until yesterday, my phone was connecting fine with it, and with that version of kies. But now, all of a sudden, I have the same problem also with this PC...
So, likely, it is a problem of the phone... the MTP application restarts everytime I try to access the phone from the PC, so... what can I try on the phone, to see if I can fix this annoying issue? I DON'T WANT TO FACTORY RESET MY PHONE, PLEASE!!!!
If any of you has any suggestion, I would be more than grateful...
JuniorGG said:
If any of you has any suggestion, I would be more than grateful...
Click to expand...
Click to collapse
I had the same problem the other day and I could not find a way to fix it, in the end I did a factory reset from Settings/Privacy and its ok now, just wiping cache did not fix it, factory reset was needed.
Dear Odia, thank you very much for replying and giving me a clue.
So... it appears that there's nothing else to do, is there? Buhahhaa!!! I want to cry!!!! I haven't made a backup and resetting the phone will be really painful... I'm already starting to feel the pain in my ass!!!
By chance, do you happen to know if I will have to buy again the apps I have already bought from the market? I have always kept both "Backup personal data" and "Automatic restore" ticked in "Settings>Privacy"... Could this be of any help?
JuniorGG said:
Dear Odia, thank you very much for replying and giving me a clue.
So... it appears that there's nothing else to do, is there? Buhahhaa!!! I want to cry!!!! I haven't made a backup and resetting the phone will be really painful... I'm already starting to feel the pain in my ass!!!
By chance, do you happen to know if I will have to buy again the apps I have already bought from the market? I have always kept both "Backup personal data" and "Automatic restore" ticked in "Settings>Privacy"... Could this be of any help?
Click to expand...
Click to collapse
You can always make a backup now before the reset and you will not have to buy paid apps again.
Yes but how can I backup my phone if kies will loose the connection with the phone as soon as it tries to access its memory?
Oh wait a moment, Perhaps I could use Kies air? Deos it allow to backup the phone? 'cause I can't test it now in my office, there's no wifi here...
From what I can tell, its the amount of the power that is supplied to the USB port itself that is the issue. I have the same problem when I put my i9100 on certain computers. Same thing happens to my WD MyPassport. Certain computers it works fine, and some it will power it for a bit, but once the device starts to draw too much current, it just disconnects.
This is why I try to do all my modding and flashing on a laptop, since, for me, they seem to be the most reliable in keeping devices powered up properly.
This is certainly a good point, but in my particular case, USB connection used to work up until yesterday with all the PCs I have (2 laptops and a desktop PC), whereas since yesterday, it works with none (with and without using the same USB ports). In addition if I use straight USB connection (hence not through the MTP app used by kies), it works fine.
Anyway what you have just mentioned is actually what scares me, because it would mean a hardware fault. But I'm crossing my fingers, hopefully it's (just) a software related issue and a factory reset will solve it. After all, straight connection works, so it would be really surprising if it were a hardware fault.
I will try resetting everything when I get home. Another "nice" busy evening to account to Samsung!
I guess if all samsung customers were honestly paid for every hour spent mending/fixing the issues of samsung products, the company would declare bankrupt in a matter of a few days!
Ok, I solved the issue with a drastic factory reset.
Thanks Odia for helping.
I spent 8 hours backing up and restoring everything included all the settings and personalisations. I went to bed at 3 am, eating only a quick sandwich in front of the bloody phone.
THANK YOU SAMSUNG, I wish to electrocute all your ****ing managers.
I hate when something in a device screws up all of a sudden and noboby knows why. It could happen again any time, and again I would have to spend hours mending a stupid phone instead of enjoying my life.
By the way, does anybody knows exactly what data is automatically backed up and restored on google servers by these functions?
"Settings>Privacy>Backup of personal data"
"Settings>Privacy>Automatic restore"
I always had both tiched, and I noticed that almost all the applications downloaded from the market that were installed on the phone, were automatically re-downloaded and restored on the phone at first boot after reset, but I'm not too shure I have understood what else was automatically restored.
I just read this thread for the first time, and was sympathetic to your issue when I started reading. I could see that there had been problems, but suggestions had been made and you seemed to be making good progress.
I was getting ready for offering advice and wishing you well with your problem.
Then suddenly you start to wish physical harm on Samsung employees.
Bye.
JuniorGG said:
Yes but how can I backup my phone if kies will loose the connection with the phone as soon as it tries to access its memory?
Oh wait a moment, Perhaps I could use Kies air? Deos it allow to backup the phone? 'cause I can't test it now in my office, there's no wifi here...
Click to expand...
Click to collapse
This is a simple solution try it and it will work for you the next time you face it most of the time it is a hardware issue i have been facing the same issue and nothing helped neither the factory reset nor the *#7284# procedure.
Take a pointy object like a pin or a paper and then clean your usb slot of the phone properly cuz most of the times usb pin points gets connected with each other due to the atmosphere and metal reaction. After that it will work like a charm for you. Before commenting anything negative i would appreciate if those who are facing this issue for a long time try this and then comment
Had the same problem, solved it by upgrading the phone software.
Setting > About Phone > Software update.
No need to afraid losing files. Hope that helps.
i faced the same problem on the GalaxyS sometime back. i did factory reset too. I got the same problem again. but i remembered it working on my LG TV so i did not go for factory reset. I went for re-install of samsung's USB driver for Windows. now it is working fine.
I fully agree that Samsung needs to be more responsible and responsive in resolving the such problems without causing data losses.
[email protected] said:
i faced the same problem on the GalaxyS sometime back. i did factory reset too. I got the same problem again. but i remembered it working on my LG TV so i did not go for factory reset. I went for re-install of samsung's USB driver for Windows. now it is working fine.
I fully agree that Samsung needs to be more responsible and responsive in resolving the such problems without causing data losses.
Click to expand...
Click to collapse
You could have saved a lot of hassle by installing a custom Rom and Kernel. I hate MTP mode! Mass storage mode is much better, I never had any problems with that....
Workaround - Power Management
This may be fixed, for now. However, in the future, there is a small workaround that you can use so that you're not required to wipe your phone every time this happens.
Here's what I do:
Since the device's connection is severed after the use of a certain amount of power, we can control the power management of the port that the device is connected to.
On WinXP:
Enter "Control Panel" > "System"
Click on "Hardware"
Click on "Device Manager"
Find the "Universal Serial Bus Controllers" section
Click the "+" next to that, and find the "USB Root Hub" that the device is connected to.
Right-click on the Hub, then select "Properties"
Click on the "Power Management" tab
Then, UNcheck the box that says "Allow the computer to turn off this device to save power."
This will prevent the connection from resetting. It's a quick workaround that works pretty well for me.
However, I ought to note that the changes should be undone after you're done with syncing the device, ESPECIALLY if you're on a laptop. Otherwise, you could risk a lot of battery/power usage within a short time, even if there is no device connected to that port.
Good luck, I hope this helps.
Cheers!
-Robbie (Zecred)
Moderator please help others as this is a community problem
Archer said:
I just read this thread for the first time, and was sympathetic to your issue when I started reading. I could see that there had been problems, but suggestions had been made and you seemed to be making good progress.
I was getting ready for offering advice and wishing you well with your problem.
Then suddenly you start to wish physical harm on Samsung employees.
Bye.
Click to expand...
Click to collapse
Please don't bail out because of that comment, i have been having this issue for a month and AT&T almost sold me another phone telling me it was the USB PORT.
I changed my phone setup dialing *#7284# and changed the UART to : PDA from Modem and same for USB (to PDA) modes. This helped get connected as before it would not even recognize the phone (computer would not do so).
I was am not sure if it is not the battery or charging circuitry, as others also reported, but my charging circuit is working fine and my battery charges 100% and last all day as normal. I can connect to the USB port and see my phone for a short while but it will suddenly disconnect.
But same as before it suddenly disconnects and will reconnect cycling continuously. I also believe it is the charge circuit because when it is charging, i hear the phone constanlty beeping from turning the schreen on/off. Same as when it is plugged into the usb port on computer.
Am tempted to buy a battery, but is can run the phone on the USB port without a battery in the phone. Problem continues without a battery...disconnecting and connecting to the computer.
Zecred said:
This may be fixed, for now. However, in the future, there is a small workaround that you can use so that you're not required to wipe your phone every time this happens.
Here's what I do:
Since the device's connection is severed after the use of a certain amount of power, we can control the power management of the port that the device is connected to.
On WinXP:
Enter "Control Panel" > "System"
Click on "Hardware"
Click on "Device Manager"
Find the "Universal Serial Bus Controllers" section
Click the "+" next to that, and find the "USB Root Hub" that the device is connected to.
Right-click on the Hub, then select "Properties"
Click on the "Power Management" tab
Then, UNcheck the box that says "Allow the computer to turn off this device to save power."
This will prevent the connection from resetting. It's a quick workaround that works pretty well for me.
However, I ought to note that the changes should be undone after you're done with syncing the device, ESPECIALLY if you're on a laptop. Otherwise, you could risk a lot of battery/power usage within a short time, even if there is no device connected to that port.
Good luck, I hope this helps.
Cheers!
-Robbie (Zecred)
Click to expand...
Click to collapse
I was plagued with this same problem, until I tried the above fix, and it works brilliantly! No more disconnects, great stuff.
It's pretty old topic but maybe someone has same issue and doesn't want to loose data. I had similar problem (couldn't connect to device, also couldn't install/uninstall any stuff because of no-space-available error).
I managed to download all pictures/documents via adb - worked pretty well. A sample command to retrieve all camera pictures:
adb pull /mnt/sdcard/DCIM
Hi
I have a broken Galaxy 3 phone where the screen suddenly stopped functioning with a total blackout so I can't use the phone at all. There is no problem getting the phone fixed within a couple of days but the problem is I want to save all my messages, contacts and other data, especially one conversation text message thread that has gone on for about a year, to my pc. I want the information to be able to be viewed independently on my computer like I read emails etc. and then I can store it on a portable hard drive by copy and paste. Samsung kies doesn't seem to allow for this. I can back up the phone apparently but the info can only be read by another similar phone so it is restricting how you see your own information. I want the information on my computer without the need of another similar phone because what if I decide to buy a totally different phone that has software that's not compatible. The shop representing Samsung who will fix the phone said that everything gets wiped and they won't even have Kies on their computers because they think its unstable software. Ideally it would be great if there was some kind of software for my computer that enabled it to read all the info on the phone as if the phone was a flash drive connected by USB and then I could simply copy and paste across from phone to computer. The phone is recognised by the computer through the USB but obviously it can't read inside the folders on the phone which just show as empty. Anybody know of anything to get the results I want? Thanks.
Hi there,
Try this..
Good luck!
adb pull /data/data/com.android.providers.telephony/databases/mmssms.db
Click to expand...
Click to collapse
Galaxy 3 broken screen
[
Sorry I tried to use these but I really don't know what I'm supposed to do. Both suggestions are completely foreign to me.
Well, I wrote a very thorough post explaining my situation, and when I tried to post it I was informed I was trying to register for my forum account instead. *facepalm* So with that thirty minutes wasted, let's try this again.
I have a Kindle Fire HDX 7. Software 4.5.2. I rooted it with an exploit, deleted some Metrics system files, and then after rebooting came up to a broken "desktop." The main Favorites window flashes from white to gray at me, there are no icons in it. I can't run any apps. I can get to the Settings menu, enable ADB, MTP, etc., but I can't turn on Wi-Fi or do updates. I did a Factory Reset, but that just erased all my content. If I reboot from this situation, I get stuck at the orange animated logo screen forever. If I hold the Volume + button and choose Factory Default from there, I can get back to the flashing Favorites desktop window, but still can't do anything just as before.
I have installed the Android SDK for Windows, installed the adb_usb.ini files, and the device is not recognized by Windows at all. It charges, but that's it. I tried using Ubuntu and SoupKit. They also don't see the Kindle as being there. No matter how many times I reboot the Kindle, all the SoupKit commands just hang at "Waiting for Device".
I made a Factory Cable. When I plug it in, the Kindle doesn't turn on. Holding down the power button does nothing. If I plug back in a regular USB, it turns right on. If I plug the Factory Cable in at the Flashing favorites screen, I hear the "plugged in" chime and the charging icon appears on the battery, but nothing else happens. If I try to reboot from there, with the Factory Cable still in, it shuts down but won't restart. I am open to the possibility I messed up the cable, but continuity seems good with my meter from both ends of the cable and from the solder joints to the micro-USB end, etc.
Has anyone seen the flashing desktop behavior? What should I be doing to try to get my Kindle recognized, so I can push the stock firmware back to it to fix this? Any help would be greatly appreciated. I made a foolish mistake and I can't seem to correct it myself, so I'm hoping someone else out there has the answer I'm overlooking. Thank you for your time.
Make sure you have the Kindle Fire ADB drivers installed.
EncryptedCurse said:
Make sure you have the (link text clipped due to restrictions on <10 posters) installed.
Click to expand...
Click to collapse
I had already installed the Google USB driver using the SDK Manager, and also modified adb_usb.ini and so forth, to no effect. I tried the instructions at the above link, though, since that Add-On site was something new. It appears some things have changed since that article was written, though, since the only thing available from the Add-On site from Amazon now is just the Kindle USB driver. I installed it, but Windows still doesn't recognize the Kindle. I rebooted the computer and the Kindle just to be sure.
To be clear, when I say it doesn't recognize it, I mean it doesn't even appear in Device Manager as an unknown device. No matter which computer, USB port, or cable I use, Windows 7 and Ubuntu simply do not see a device as there. The Kindle chimes and shows the charging icon, but Windows doesn't see anything as being plugged in.
From what I'm reading, it appears the factory cable I made is useless with the Fire HDX line.
I notice that the SuperSU app is still installed for what it's worth. I can't run anything, so it's kind of hopeless. I can't seem to find the original exploit that I used, but I basically just tapped a button that said "Gimme Root" and then I had super user access. Dangerous, dangerous super user access.
I'm not opposed to opening the Kindle up and tinkering with things, if there's any chance that will help correct this problem.
Valence1981 said:
I made a Factory Cable. When I plug it in, the Kindle doesn't turn on. Holding down the power button does nothing. If I plug back in a regular USB, it turns right on. If I plug the Factory Cable in at the Flashing favorites screen, I hear the "plugged in" chime and the charging icon appears on the battery, but nothing else happens. If I try to reboot from there, with the Factory Cable still in, it shuts down but won't restart. I am open to the possibility I messed up the cable, but continuity seems good with my meter from both ends of the cable and from the solder joints to the micro-USB end, etc.
Click to expand...
Click to collapse
"Factory cables" (sometimes called fastboot cable) are useless on all HDX models. Stick with a standard, high quality USB cable. I realize this seems counter intuitive but Amazon has done their best to make the latest generation of devices inaccessible to those looking to leverage the hardware or simply recover and non-functioning device.
Your issue with 'seeing the device' is likely due to Windows drivers. If the suggestion from @EncryptedCurse doesn't work suggest deleting all related entries from device manager when the device is tethered, reboot and then reconnect. Windows should install the correct drivers assuming you downloaded the Kindle specific ones in advance. There are shortcuts to this procedure (eg: a reboot really isn't necessary) if you know your way around Windows.
Davey126 said:
"Factory cables" (sometimes called fastboot cable) are useless on all HDX models. Stick with a standard, high quality USB cable. I realize this seems counter intuitive but Amazon has done their best to make the latest generation of devices inaccessible to those looking to leverage the hardware or simply recover and non-functioning device.
Your issue with 'seeing the device' is likely due to Windows drivers. If the suggestion from @EncryptedCurse doesn't work suggest deleting all related entries from device manager when the device is tethered, reboot and then reconnect. Windows should install the correct drivers assuming you downloaded the Kindle specific ones in advance. There are shortcuts to this procedure (eg: a reboot really isn't necessary) if you know your way around Windows.
Click to expand...
Click to collapse
I plugged the Kindle in (I'm at the Settings menu on it, since staying at the launcher/home/favorites screen just threatens to give me epilepsy with its constant flashing), I removed all the USB host controllers and root hubs, then scanned for hardware changes to reinstall them. The Kindle is not found, as a recognized device or an unknown one. As I said, when I boot from a thumb drive into Ubuntu, it doesn't find it either. When I run adb devices, it says no device is found. I have heard of people getting it to take ADB commands anyway, despite the not found error, by just repeatedly rebooting the Kindle, but it hasn't worked for me.
Valence1981 said:
I plugged the Kindle in (I'm at the Settings menu on it, since staying at the launcher/home/favorites screen just threatens to give me epilepsy with its constant flashing), I removed all the USB host controllers and root hubs, then scanned for hardware changes to reinstall them. The Kindle is not found, as a recognized device or an unknown one. As I said, when I boot from a thumb drive into Ubuntu, it doesn't find it either. When I run adb devices, it says no device is found. I have heard of people getting it to take ADB commands anyway, despite the not found error, by just repeatedly rebooting the Kindle, but it hasn't worked for me.
Click to expand...
Click to collapse
My bad - I overlooked some key details in your original post even though clearly stated. If you are not seeing the the device from any host (and you have certainly done the things I would have suggested) there is little you can do to recover via standard methods. A couple longshot suggestions:
- change cables. I know you tried a homebuilt cable but grab a couple standard cables just to rule out a bad wire; crappy usb cables are more common than people think
- check for a bent/missing pin in the micro-usb port; possible you aren't making a data connection (for others benefit, data and charge use different pins)
I realize both the above are highly unlikely given the sequence of events that lead up to your current problem. Running out of ideas ...
I doubt this will help, but one long shot on Windows is try to use the HDX toolkit to install the adv drivers. It won't do anything else with this build, but if this is a driver issue, it could possibly fix it. Also, if you can try revoking adb permissions if you can get to that window and try a different usb port.
These are all last ditch efforts though.
I tried the HDXToolkit driver install. It seemed promising, but it still doesn't see the Kindle. Checking the connector to see if the data pins were damaged was a good idea, but unfortunately they look unmangled. I am using a regular USB cable at this point, by the way.
I can't disable ADB mode on the Kindle itself. I can go to the Developer menu and try to disable it, but it just kicks me back to Settings and the option stays set to On when I go back to it. I can switch between MTP and CTP for whatever that's worth.
I appreciate the optimism. I'm quite upset with myself for doing this to my Kindle, as I really was getting a lot of use out of it. I can't help but be a little mad at Amazon, too, for making it so hard to fix this.
Oh, I was also going to mention that when I go to the stock recovery window with the option between reboot and factory restore, at the bottom under the Kindle logo it says "No Command" not sure what the significance is of that. I've seen where some people get a lot of error messages in that area.
Valence1981 said:
I tried the HDXToolkit driver install. It seemed promising, but it still doesn't see the Kindle. Checking the connector to see if the data pins were damaged was a good idea, but unfortunately they look unmangled. I am using a regular USB cable at this point, by the way.
I can't disable ADB mode on the Kindle itself. I can go to the Developer menu and try to disable it, but it just kicks me back to Settings and the option stays set to On when I go back to it. I can switch between MTP and CTP for whatever that's worth.
I appreciate the optimism. I'm quite upset with myself for doing this to my Kindle, as I really was getting a lot of use out of it. I can't help but be a little mad at Amazon, too, for making it so hard to fix this.
Oh, I was also going to mention that when I go to the stock recovery window with the option between reboot and factory restore, at the bottom under the Kindle logo it says "No Command" not sure what the significance is of that. I've seen where some people get a lot of error messages in that area.
Click to expand...
Click to collapse
Some very left-field ideas:
- try enabling bluetooth. Obviously if you can get that working there is a way to move files to/from device which might provide additional repair/recovery options.
- there is a rumor that long pressing power (40+ sec) performs some type of 'hard reset' on the device. Never see it work but worth a try.
If the device is still within warranty reach out to Amazon. They are pretty good about providing replacements (say it died during an update) although it will likely be a refurb. Who knows, might get one with a low enough fimware level to unlock. That opens a entirely new set of options.
It would appear that the HDX can't use Bluetooth for file transfers, only for connecting peripherals like keyboards and speakers. I'm going to try it anyway.
I have done the long power button hold down, but it doesn't seem to do anything.
I believe I should be in warranty. I got my Kindle for Christmas, so it's only about 6 months old. I'd rather not have to lie to customer service, though. So I'm still prodding at this trying to find a solution. If I could just get WiFi to work, so I could download a firmware update, I think that might help, but of course everytime I put in my network information and tell it to save it, it kicks me back to the Settings window and I get no connection.
The 40 second Hard Reset never worked in my case, although My Kindle didn't even boot up after my stupidity.
Valence1981 said:
It would appear that the HDX can't use Bluetooth for file transfers, only for connecting peripherals like keyboards and speakers. I'm going to try it anyway.
I have done the long power button hold down, but it doesn't seem to do anything.
I believe I should be in warranty. I got my Kindle for Christmas, so it's only about 6 months old. I'd rather not have to lie to customer service, though. So I'm still prodding at this trying to find a solution. If I could just get WiFi to work, so I could download a firmware update, I think that might help, but of course everytime I put in my network information and tell it to save it, it kicks me back to the Settings window and I get no connection.
Click to expand...
Click to collapse
Understand the ethical concern. Stating it died during an update is technically correct provided you don't indicate who was doing the updating. If asked if the device is rooted then you should come clean (which could impact Amazon's decision whether to replace). I have a great relationship with Amazon and believe honesty will ultimately get you further than deception.
So it doesn't appear there is anything else I can do about this. The Kindle isn't recognized by any computer I have, using Windows XP or 7, or using Ubuntu. I read that XP might be able to see it if I disabled ADB, but it's permanently turned on and if I try to turn it off it kicks me back to the Settings menu without actually changing the setting. Since no computer can see it, I don't think there is anything I can do to recover it. Unless someone figures out a way to flash the ROM by taking the thing apart and doing it manually, which I don't think is going to happen anytime soon. I can't believe I ruined my Kindle. Looks like all that's left is contacting support and seeing if they'll help me with a replacement.
Actually, one other thing. If I have to send the old one back, won't they notice that SuperSU is installed and realize what I did?
Valence1981 said:
So it doesn't appear there is anything else I can do about this. The Kindle isn't recognized by any computer I have, using Windows XP or 7, or using Ubuntu. I read that XP might be able to see it if I disabled ADB, but it's permanently turned on and if I try to turn it off it kicks me back to the Settings menu without actually changing the setting. Since no computer can see it, I don't think there is anything I can do to recover it. Unless someone figures out a way to flash the ROM by taking the thing apart and doing it manually, which I don't think is going to happen anytime soon. I can't believe I ruined my Kindle. Looks like all that's left is contacting support and seeing if they'll help me with a replacement.
Actually, one other thing. If I have to send the old one back, won't they notice that SuperSU is installed and realize what I did?
Click to expand...
Click to collapse
Sorry for your troubles. Amazon is pretty easy going - at least in my region. If the device is in warranty and you simply describe the symptoms without going into too much detail you should get a replacement. I don't believe they inspect devices beyond looking for obvious physical damage. The device will likely get 'reprogrammed' and be sold as a refurb. It makes little economic sense to have a tech inspect returned devices unless they are looking for something specific or a pattern of failures. Good luck.
Any have file APQ8074.hex and 8074_msimage.mbn for unbrick QHUSB?
I dropped my s3 and now it has a very thin crack on it. First I was able to see some colours but now it is only black - touch screen gave no response aswell. I was also lucky enough to get the battery out on the initial drop so now all I can do is turn the phone on with or without simcard and let it connect to Wi-Fi. There were no SD Cards aswell.
The phone is not rooted, it is just "stock" in every way.
Getting it repaired costs more than what I paid for it while buying it from a friend years ago so I'm not even considering to get it repaired, I will buy a new smart phone, probably a Galaxy Note 4 or 5. (I'm not sure but this info might be useful. My smart phone knowledge is not much but may be there is a way to fix my issue(that I am explaining below) with the use of a Galaxy Note - without disintegrating the new Note)
My problem is that I need to retrieve a phone number that I didn't have the chance to save yet at the time of the drop. The number is probably one of the latest 5 in Call History and there was also an SMS that came from that number - that specific SMS was saved on the phone, not the simcard.
Absolutely nothing happens on computer side(Windows 7 Ultimate) when I plug it via USB. Can't see the content of the phone in File Explorer or anything else. I updated drivers. The phone starts charging, though.
Samsung Kies does not work as it does not recognize the phone when connected via USB and I need to scan the QR Code to connect it via Wi-Fi which is impossible since I can not give any commands to the phone nor see anything but a black screen.
I have this Samsung Link program. It recognizes the phone through Wi-Fi and I can browse files in the phone from my computer. I checked all files, there is nothing SMS or Call History related. On my web searches, I found out that SMS messages are stored in "/data/data/com.android.providers.telephony/databeses/mmssms.db" but there are no such folders that start with "com.android.providers".
I did not have debugging or other things active at the time and I can not turn anything on or off. It only has Wi-Fi enabled.
I can't even turn the phone off except for pulling the battery out since I need to touch the shut down option that comes in the menu when you hold the power button on the side.
Is there a way to view my Call History or SMS messages from my computer? Please bear in mind that I can not install any apps or give any commands at all to my phone by the use of its screen and it is not recognized by the computer when it is connected via USB.
Most success I've had is the program called Samsung Link that allows my computer to connect to the phone by Wi-Fi and browse files, pictures, videos and such. (Also I did another check for both USB and Wi-Fi connections while typing these. USB still does not work)
I do not have access to another phone to swap screens-motherboards-whatnot.
Kind regards.
angred said:
I dropped my s3 and now it has a very thin crack on it. First I was able to see some colours but now it is only black - touch screen gave no response aswell. I was also lucky enough to get the battery out on the initial drop so now all I can do is turn the phone on with or without simcard and let it connect to Wi-Fi. There were no SD Cards aswell.
The phone is not rooted, it is just "stock" in every way.
Getting it repaired costs more than what I paid for it while buying it from a friend years ago so I'm not even considering to get it repaired, I will buy a new smart phone, probably a Galaxy Note 4 or 5. (I'm not sure but this info might be useful. My smart phone knowledge is not much but may be there is a way to fix my issue(that I am explaining below) with the use of a Galaxy Note - without disintegrating the new Note)
My problem is that I need to retrieve a phone number that I didn't have the chance to save yet at the time of the drop. The number is probably one of the latest 5 in Call History and there was also an SMS that came from that number - that specific SMS was saved on the phone, not the simcard.
Absolutely nothing happens on computer side(Windows 7 Ultimate) when I plug it via USB. Can't see the content of the phone in File Explorer or anything else. I updated drivers. The phone starts charging, though.
Samsung Kies does not work as it does not recognize the phone when connected via USB and I need to scan the QR Code to connect it via Wi-Fi which is impossible since I can not give any commands to the phone nor see anything but a black screen.
I have this Samsung Link program. It recognizes the phone through Wi-Fi and I can browse files in the phone from my computer. I checked all files, there is nothing SMS or Call History related. On my web searches, I found out that SMS messages are stored in "/data/data/com.android.providers.telephony/databeses/mmssms.db" but there are no such folders that start with "com.android.providers".
I did not have debugging or other things active at the time and I can not turn anything on or off. It only has Wi-Fi enabled.
I can't even turn the phone off except for pulling the battery out since I need to touch the shut down option that comes in the menu when you hold the power button on the side.
Is there a way to view my Call History or SMS messages from my computer? Please bear in mind that I can not install any apps or give any commands at all to my phone by the use of its screen and it is not recognized by the computer when it is connected via USB.
Most success I've had is the program called Samsung Link that allows my computer to connect to the phone by Wi-Fi and browse files, pictures, videos and such. (Also I did another check for both USB and Wi-Fi connections while typing these. USB still does not work)
I do not have access to another phone to swap screens-motherboards-whatnot.
Kind regards.
Click to expand...
Click to collapse
You won't be able to view the stuff you're looking for with a file manager on PC, Windows can only view the MTP portion of your sdcard, it cant access or view your system partition which is where mmssms.db is located. You will need to have the device rooted in order to retrieve the files you're after.
You can connect a USB mouse to your device and make selections using the mouse instead of touch, the tricky part is knowing where things are on the display to select them, you can use screenshots of the needed screens from another device like yours. If you can get it to connect to PC via VLC you can share the screen to your PC and navigate that way(you'll need root to access the folder you're after), if you can get it to screencast you can navigate that way also.
Regardless of whether you repair the screen or not, you will have to root the device to do what you're doing.
Sent from my SCH-I535 using Tapatalk
angred said:
I dropped my s3 and now it has a very thin crack on it. First I was able to see some colours but now it is only black - touch screen gave no response aswell. I was also lucky enough to get the battery out on the initial drop so now all I can do is turn the phone on with or without simcard and let it connect to Wi-Fi. There were no SD Cards aswell.
The phone is not rooted, it is just "stock" in every way.
Getting it repaired costs more than what I paid for it while buying it from a friend years ago so I'm not even considering to get it repaired, I will buy a new smart phone, probably a Galaxy Note 4 or 5. (I'm not sure but this info might be useful. My smart phone knowledge is not much but may be there is a way to fix my issue(that I am explaining below) with the use of a Galaxy Note - without disintegrating the new Note)
My problem is that I need to retrieve a phone number that I didn't have the chance to save yet at the time of the drop. The number is probably one of the latest 5 in Call History and there was also an SMS that came from that number - that specific SMS was saved on the phone, not the simcard.
Absolutely nothing happens on computer side(Windows 7 Ultimate) when I plug it via USB. Can't see the content of the phone in File Explorer or anything else. I updated drivers. The phone starts charging, though.
Samsung Kies does not work as it does not recognize the phone when connected via USB and I need to scan the QR Code to connect it via Wi-Fi which is impossible since I can not give any commands to the phone nor see anything but a black screen.
I have this Samsung Link program. It recognizes the phone through Wi-Fi and I can browse files in the phone from my computer. I checked all files, there is nothing SMS or Call History related. On my web searches, I found out that SMS messages are stored in "/data/data/com.android.providers.telephony/databeses/mmssms.db" but there are no such folders that start with "com.android.providers".
I did not have debugging or other things active at the time and I can not turn anything on or off. It only has Wi-Fi enabled.
I can't even turn the phone off except for pulling the battery out since I need to touch the shut down option that comes in the menu when you hold the power button on the side.
Is there a way to view my Call History or SMS messages from my computer? Please bear in mind that I can not install any apps or give any commands at all to my phone by the use of its screen and it is not recognized by the computer when it is connected via USB.
Most success I've had is the program called Samsung Link that allows my computer to connect to the phone by Wi-Fi and browse files, pictures, videos and such. (Also I did another check for both USB and Wi-Fi connections while typing these. USB still does not work)
I do not have access to another phone to swap screens-motherboards-whatnot.
Kind regards.
Click to expand...
Click to collapse
You can also try flashing a custom recovery(CWM if you can get it, what I'm talking about might not work with TWRP and if it did it would still be tricky). CWM can be used by the hardware keys to make selections where TWRP is touch which wouldn't work for you. With a CWM custom recovery you could make a backup of the device then copy the backup over to PC then extract everything you need. You could even root and flash TWRP then boot to TWRP and connect to adb and use adb to create a backup, there are instructions that are easy to find for creating backups with adb, just make sure you understand the instructions so that you're sure you're retrieving everything you need. Then extract what you need from the adb backup.
Maybe easier but more time consuming, contact your service provider and have them send you a copy of your call history, it should all the numbers you've called during the period of time that you ask them for.
Sent from my SCH-I535 using Tapatalk
My phone fell into water for less than a second. After drying it out, the screen worked for a couple of days, after which time it would no longer turn on. The capacitive buttons light, but not the display. I restarted it (power and volume down), but I can't unlock it now since the screen isn't working. I have a fingerprint stored, but can't use it after a restart without my unlock code. I have since bought an S7 Edge, so the S6 is no longer connected to the network. In addition, it appears that I had WiFi off as Find My Mobile can't locate it.
I really want to get my data off the phone, specifically pictures/videos, etc... I've tried to connect via adb, but I can't seem to get the device to show up. I tried Vysor, but it can't see it either. Kies sees it, and my Windows PC also sees it (can't access the filesystem unless it's unlocked). The S6 doesn't support HDMI/MHL (thanks Samsung), so I can't send the output to a TV.
Any help would really be appreciated. I don't want to dump $150 for a new screen unless I have no other choice to retrieve my data.
I have the exact same issue and looking for an answer as well.
Wondershare could help you guys. Not sure if it needs confirmation on the phone, but it seems to have a seperate mode for broken displays. I hope it works. Which kind of information do you need most? Like pictures, or contacts,...? Because depending on your need, we might be able to find another solution for you.
https://youtu.be/K3QHUyXgW_c
Might work as well.
Sent from my SM-G925F using XDA Free mobile app
Thanks N00BY0815. I'll take a look at the info you provided and report back.
Ideally, I'd like to get my pictures, videos, and at least some other data (my Temple Run save, etc...). Most of my contacts were stored in my Google account, but odlly some weren't stored (I could swear that I selected my gmail account each time I added a contact, but I guess not).
Thanks
N00BY0815 said:
Wondershare could help you guys. Not sure if it needs confirmation on the phone, but it seems to have a seperate mode for broken displays. I hope it works. Which kind of information do you need most? Like pictures, or contacts,...? Because depending on your need, we might be able to find another solution for you.
Might work as well.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
I tried to turn the phone off (volume down and power button while plugged in to the charger). I've done it before and it has appeared to turn off. This time, however, the screen lit up slightly green and the LED is now pulling blue as if it were starting up. Now I can't seem to do anything with it. It won't turn off.
Any ideas?