I installed a galaxy A7 port with a partition script, then reverted it installing the stock rom with odin.
But when I connect my phone to a computer from TWRP, it shows up as A7, so when I try to install orange fox for my J6 it says "this package is for j6lte. This device (a7y17lte) is not supported"
The weirdest part is that it shows as J6 when I connect it to the computer outside TWRP.
Any idea how to make it display the correct device (j6lte) on TWRP?
flash TWRP for J6 in ODIN again
Related
Phone specs:
Samsung Galaxy S3 Verizon SCH-i535
It was already running KitKat 4.4.2 before I rooted
This is my first time rooting and flashing ROMs to my Samsung Galaxy s3 and I have bricked it. I'm pretty sure it can be salvaged but have yet to find anything that works.
I have written the long version for those who need it, but the short version is that I screwed up and can no longer boot into recovery mode or normal mode, I'm not even sure if Download mode is working, and my device isn't recognized by Kies or Odin on my PC so I cannot yet do a recovery from there.
As of now my phone only boots into Odin Mode and gives the following info:
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 2
and displays the yellow triangle error and says: Firmware upgrade encountered an issue. Please use Software repair Assistant & try again.
I tried to use Samsung Kies which has an emergency firmware tool but my device will not connect and become recognized by the program.
This is pretty much where I'm stuck.
Keep reading if you need additional info.
Steps leading up to problem:
I was able to Root the device succesfully
I then downloaded the latest CM11 package (cm-11-20140217-NIGHTLY-d2vzw.zip) and Gapps
I also downloaded the TWRP recovery img (openrecovery-twrp-2.7.1.0-d2vzw.img)
Once I had these downloaded I got the app [ROOT] Rashr - Flash Tool
I opened the app and tried to do a backup but I'm pretty sure it failed, or at least it said it failed. I couldn't find out how to check, but was not worried since I have already backed up my important files to the verizon cloud.
On the app I went to recover using other file and found the TWRP recovery img I downloaded.
From here I booted into recovery manually, but it did not bring up the TEAMWIN screen for TWRP like I've seen in other video tutorials so I rebooted into normal mode went to the Rashr app again and followed the prompt to do a Recovery boot using the TWRP img.
THIS IS WHERE THE PROBLEMS BEGAN:
It began to lead into recovery mode but it gave a message that said something along the lines that I have tried installing a custom OS and to take my phone to the nearest verizon store.
I turned it off and tried to boot back normally but got the same error.
I tried to boot into Download mode and was successful! So I thought yaay!
Read a tutorial to reload a stock version of android here: http://forum.xda-developers.com/showthread.php?t=2586319
I followed all the steps but when i got to 7. which said You should see your phone under ID:COM (you should also see it has been added in message) I was not seeing my phone there. I figured it may be OK since I was able to install the drivers so that meant the USB was working so I went ahead and ran Odin to recover Jelly Bean 4.3 onto the device.
My thoughts and guesses as to what the problem is:
I think that it may be because I was already running 4.4.2 and/ or didn't have the proper bootloader when I tried to do the TWRP recovery.
Am I on the right track? Thanks for any help!
Please ask. In correct forum this is int'l s3 (i9300) forum
Dear Members help is needed!
The device was running 5.1.1 version and upgraded to 7.0 with FOTA.
Then the device start to stuck and restart until I got "SAMSUNG GALAXY S6 edge powered by android"
And stuck at this screen forever (NO BOOTLOOPS).
Things i tried:
1. Flash with ODIN same ROM version and downgrade versions (Didn't helped)
2. Smart Switch restore, it finished successfully but Didn't helped (Same screen)
3. TWRP ODIN and install custom ROM (Didn't helped)
4. no-verity-opt-encrypt-5.1 install (Didn't helped)
More Details:
1. Cannot turn off the device, just when i'm in TWRP and pressing POWER OFF
(WHEN USB CABLE IS CONNECTED TO DEVICE IT START AUTOMATICALLY!)
2. Device Manager recognize device as "SAMSUNG Mobile USB Modem" under Download Mode
3. TWRP is the only thing that working as recovery
(After installing Original ROM Recovery doesn't works)
4. When switching to ADB Sideload device manager recognize as SAMSUNG Android ADB interface.
5. When i'm in TWRP PC shows just Internal Storage.
Any other ideas to make this phone to work?
So today I wanted to root my phone and flash a custom rom. I went to the PC and setted my phone in download mode, opened Odin, downloaded the TWRP from the S9 (SM-G960F) XDA Forum then I've selected on AP (Odin) the .img file but it gave me error. My phone said "Custom Binary (USERDATA) blocked by FRP lock" and now when I try to boot it says "An error occurred while updating the device software use the emergency recovery function" but it won't be recognized by the tool. I'm basically stuck with my phone giving me this message with a blue background.
Edit: Nevermind, I fixed it and got TWRP to work.
Hello androids, I have a big problem or a good challenge, depends on your optimism. I've been looking for and trying solutions for hours and hours, but I think I've come across a wall and I need your help:
Originally I wanted to root my s7 Edge / SM - G935F (OS Marshmallow 6.0.1) by following a tutorial using an autoroot ROM for this phone. I remember I had USB debugging and OEM unlock enabled. I also installed the USB / ADB drivers correctly.
I used Odin v3.11, since they recommended using it for this mobile and MM 6.0.1. According to Odin, the rom was installed successfully, but my phone entered a loop with the Samsung logo and "RECOVERY IS NOT SEANDROID ENFORCING". Something failed in the process and I decided to install a S7 Edge stock ROM in 8.0.0 from SAMMobile (this one) with Odin v3.13 using HOME_CSC so that I don't lose certain data
Unfortunately everything was going well until just at the end when "hidden.img" did not process correctly and resulted in FAIL. I've been since then stuck with this error:
"An Error has occurred while updating the device software. Use the Emergency Recovery in the Smart Switch PC Software."
It won't even turn off. From there I can only access the Download Mode and neither the Smart Switch or the ADB & Fastboot console won't detect the device. Odin does recognize the phone, but every time I try to install a rom, the log gets stuck in "SetupConnection ..".
I have tried a bunch of solutions such as removing the "hidden.img" from the package, reinstalling the drivers, changing the USB port, changing Odin's version, installing only the BL, etc., but nothing shows progress...
I'm sorry if during the process I managed to do some stupidity that I am not aware of. Other phones I have never had problems, but now I feel defeated and lost. I need a savior! :crying:
Any way to make Odin work, ADB detect my device or access a working bootload? Thanks in advance!
My box is on Magendanz's Nexus ATV rom. but thats 6.0 and I wanted to try 7.1 or 8.0 but it refuses to let me update any way I try.
I have tried the USB Flashing tool and ATVxperience rom but my box isn't being recognised as being in "burnable" state - the reset pin does work but its not recognising or putting into correct state for the USB tool to see it
I have tried Burn Card maker and ATVxperience rom but again it isn't recognising card or the "burnable" state
I have tried TWRP but my TWRP didnt allow me to flash the IMG saying "Size of image is larger than target device" - I think Magendanz's rom maybe didnt have all the right partitions or sizes? He's not responding to support requests
I tried to get original FW back using TWRP but same issues.
Tried to put a new TWRP on and buggered that up so now box thinks it has no recovery to boot to. BOX DOES BOOT and I can access terminal and root but when I tried dd if=/storage/recovery.img of=/dev/block/recovery it wrote a new TWRP but "reboot recovery" just gets me the Nexus logo.
I'd be tearing hair out if I had any left. I am guessing the partitions all need rebuilding and TWRP reinstalling but no ideas left.... Any help???