I have been using huawei honor9i for quite some time and recently i faceda bootloop issue. I haven't rooted the system and not even changed any system files. But the phone is stuck. Whenever i power it on it displays the honor logo, followed by a green screen that have a red and blue rectangle. The phone doesn't go beyond it and returns to the company logo.This loop continues till the power is drained and starts whenever i put the phone on charging. Can anyone help me out on how to retrieve data from it or how could i establish a connection between the device and the pc so that i can make a backup on the pc.
Related
Hello everyone,
I recently received an Innovatek Inno Pad 10 (chinese android tablet) as a gift and the problem is that the tablet does not boot up. When I got the tablet and turned it on, it showed me an android bootloader screen and then it brought me to the android logo boot screen where it would basically go into an infinite boot sequence. I have tried charging it fully and then turning it on, I have tried un-plugging the battery and plugging it back in. I even tried re-flashing the firmware on the device using a software supplied by the company (it was very hard to find and the company's support is not that great). The flashing process was completed successfully but the tablet would still go into an infinite boot loop (I even tried re-flashing it again with no luck). Here is the worst part, there was a u-boot-nand.bin file included with the program and I decided to try and flash the tablet using that file. Now the tablet's screen won't even turn on, but the power and charge buttons still light on. I think the bootloader got messed up. Does anybody have an idea how to get this tablet working? I have posted pictures of the tablet and its specs.
Thanks
John
I'm using the Samsung Galaxy 10.1 Tab (Verizon) SCH-i905
From what I have read, the reboot loop is when the user sees the boot screen, but the tablet keeps on rebooting. My problem is severely worse.
My tablet keeps on reboots, but it doesn't show the boot screen. Instead, it just shows a blank lit up screen.
Not only that, but I cannot always turn on my tablet. I keep trying, but it typically turns on after I keep plugging and unplugging the USB from my outlet to computer, and so forth (for about 10 minutes). When it finally boots, I can go into Odin mode. I flash some sort of firmware to it, and then my device turns off. And I need to keep attempting to turn it on again for 10 minutes before it actually turns on.
Nevertheless, my device still does not work properly. I know this is infact a software problem because my device was working fine yesterday, until I decided to unmount and mount certain things in Recovery mode.
So far, I have flashed recovery.tar.md5 , PDA_SIGNED_P7105.tar, and 75XX_CWM_Recovery_v5.1.2.6.tar. None of these have fixed the problem. How can I return to factory settings?
I just saw the previous thread about this device and am currently installing PDA_HC31_EG0 ... If everything goes right, then there should be no problem. But I highly suspect that the firmware will flash successfully, and then my device will proceed to power off for another 10-15 minutes before turning on again.
If I leave my device plugged into the power source, it will start turning on and off (the blank lit screen) periodically. For example, turns on for 5 seconds, then turns off for 5 seconds (and repeat).
While this is a software problem, it seems to be on the OS level. Are there any other ROM Links besides the ROM in showthread.php?t=1342995 that I should try? Also, is there any other possible alternative?
Hello,
This is my first post so i hope that this is the right place.
I have a serious problem. My K910 is endlessly rebooting.
It all started after i updated android from 4.2.2 to 4.4.2 When device rebooted after installation it never came further than lenovo logo.
When phone turns on, it vibrates, then lenovo logo comes out for 2-3 seconds then it dissapears and the loop starts again.
it shuts down only when i push power button and volume- button multiple times.
I have tried to enter recovery/safe mode, but with no results phone keeps rebooting.
I reinstalled battery but still as i turn the phone on, same problem occurs.
As soon as i connect my phone to pc phone turns on and endless loop starts again.
Questions:
How can i change to stock ROM or connect to PC in this situation since it keeps on rebooting my pc doesnt see added device?
What can i do to fix this situation?
Please Help.
I promise $feedback if this thing can be fixed
trusis16 said:
Hello,
This is my first post so i hope that this is the right place.
I have a serious problem. My K910 is endlessly rebooting.
It all started after i updated android from 4.2.2 to 4.4.2 When device rebooted after installation it never came further than lenovo logo.
When phone turns on, it vibrates, then lenovo logo comes out for 2-3 seconds then it dissapears and the loop starts again.
it shuts down only when i push power button and volume- button multiple times.
I have tried to enter recovery/safe mode, but with no results phone keeps rebooting.
I reinstalled battery but still as i turn the phone on, same problem occurs.
As soon as i connect my phone to pc phone turns on and endless loop starts again.
Questions:
How can i change to stock ROM or connect to PC in this situation since it keeps on rebooting my pc doesnt see added device?
What can i do to fix this situation?
Please Help.
I promise $feedback if this thing can be fixed
Click to expand...
Click to collapse
That means your phone is in bootloop. Try opening recovery and wipe cache/data . If you got a custom recovery, then its much better.
Hello,
Also i experienced similar problem with a defective battery,
after i removed it too much,
fixed by replacing it,
hope it helps.
Hello,
I have a 7 months old Xiaomi Mi Mix 2S. I did nothing particular with it (no root, no ROM installed...), only the integrated updates of MIUI as they were available.
This morning it was working just fine, until I got it out of my pocket and it wasn't booting at all. I tried plugging it in, and then it started to boot-loop (Mi logo with URL showing, then battery logo with %-age, ~30% at first and slowly going down, for a second, before stopping and doing it again) I was able to start fast boot by holding start and volume down, the Fast Boot logo showing for about 10 seconds before stopping and going back to the boot-loop. I then tried connecting it to my computer, installing MiFlash and downloading the most recent official ROM. After some boots it stopped and stayed shut down, with only the led usually indicating charge on. I left it like that while the ROM was downloading, and now (2h later) the led doesn't show any more and it doesn't boot at all, be it normal or fast-boot.
So now I'm out of ideas, any help would be appreciated !
Thanks in advance.
I am trying to get a Huawei Y6 2015 (I believe the model is SCL-L04) to work again. When it was given to me, the phone would power on, display the Huawei logo for a few seconds, then the screen would shut off and the notification LED would turn solid blue. Nothing else would happen. I just flashed a new stock ROM onto it via SD, and now it is simply boot looping - it comes on, shows the Huawei logo for a few seconds, but instead of the blue LED, it simply repeats the cycle over and over again. The phone died randomly while in use for no apparent reason - it just shut off, then the LED went blue, and that's the last that was heard of it. It is able to enter fast boot mode, and recovery mode. I have tried factory resetting it, as well as clearing the cache partition, but neither of those worked. HiSuite does not detect the phone when it is in fast boot mode, but my computer does detect it as removable media and allow me to view its files.
Any suggestions? At this point, I'm beginning to suspect hardware failure. Thanks!