Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Advanced07 said:
Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Click to expand...
Click to collapse
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Thanks I'm gonna give these a try and I will let you know how it goes
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Tried all the ADB commands and they all failed, gonna try to use the SD card method.
-Alf- said:
Hello, try this way out...
1. install on your PC "Minimal ADB and fastboot" tool, in fastboot mode run command
fastboot erase userdata
and try restart the device.
Or,
2. download and use a Service ROM with an sd/card or an USB-OTG flashdrive in dload mode. Download correct Service ROM from androidhost.ru website, unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .
The first step is to determine which variant of your device you are on.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
(The bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download!).
Service ROM can be found here:
https://androidhost.ru/search.html . Type Ane- or Anne- .
For example, for build number ANE-LX1 9.1.0.278 C432) :
https://androidhost.ru/Xar
Maybe it will help you...
Click to expand...
Click to collapse
Device won't enter dload mode either. I hold the 3 buttons but it just bootloops.
Sorry, I'm out of ideas (with the locked bootloader).
-Alf- said:
Sorry, I'm out of ideas (with the locked bootloader).
Click to expand...
Click to collapse
I'm as well, the only thing that might work is removing and placing the battery ribbon cable again but I don't have the glue to close the case. Should I still try it?
Advanced07 said:
but I don't have the glue to close the case. Should I still try it?
Click to expand...
Click to collapse
You should try it, why not.
IMO it might be the HW problem , dead memory or damaged motherboard, (fastboot commands are not working).
-Alf- said:
You should try it, why not.
IMO it might be the HW problem , dead memory or damaged motherboard, (fastboot commands are not working).
Click to expand...
Click to collapse
The fastboot commands are working but it says I don't have permission to do it or something along those lines it refuses to execute it
Advanced07 said:
Hello guys. My brother's Huawei p20 Lite is stuck in a bootloop. I'm unable to access the recovery and Erecovery (tried 10 times but it just won't work.) The only thing that works is Fastboot mode and it shows this error. Can't use Hisuite because apparently this phone isn't supported to be recovered using that program. How can I fix this phone? Is it permanently bricked?
Click to expand...
Click to collapse
Same phone and same thing happened to me. What's different is that twrp recovery works.
It all started when I unlocked the bootloader with PotatoNV. I unlocked it with the fastboot oem unlock MYUNLOCKCODE command.
Then i flashed twrp: fastboot flash recovery_ramdisk d:\twrp.img
Then whatever happened, I started seeing the error "AP_S_ABNORMAL 64" in fastboot mode, but running commands was fine.
I deleted everything by entering the codes below with fastboot mode.
fastboot erase system -w
fastboot erase userdata
Then I reinstalled twrp recovery by entering the codes below and flashed a custom rom.
fastboot flash recovery_ramdisk d:\twrp.img
fastboot flash system d:\MyCustomRom.img
Suddenly what do I see.
When I rebooted with the fastboot reboot command, twrp was constantly opening. The system would not boot at all. I was desperately doing everything I could think of. Only one thing worked. I opened emui e-recovery by pressing the volume up, volume down and power keys at the same time. It was failing there and there was only one option; I clicked restart. The system booted this time, not twrp, and after a long wait, the main installation screen came.
biorap said:
I opened emui e-recovery by pressing the volume up, volume down and power keys at the same time. It was failing there
Click to expand...
Click to collapse
it is not e-recovery, this buttons combination triggers the installation of FW by the dload method.
biorap said:
fastboot erase system -w
fastboot erase userdata
Click to expand...
Click to collapse
Use stock Recovery - Wipe cache partition & Factory reset
biorap said:
flashed a custom rom
Click to expand...
Click to collapse
How to install Treble GSI ROMs on Kirin-devices:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
-Alf- said:
it is not e-recovery, this buttons combination triggers the installation of FW by the dload method.
Use stock Recovery - Wipe cache partition & Factory reset
How to install Treble GSI ROMs on Kirin-devices:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
Click to expand...
Click to collapse
Thank you for your clarify.
Is it possible to use stock recovery when i flash a custom rom via fastboot mode? I mean; do i have to use twrp when i wanna flash a custom rom? Is it possible to use custom rom with stock recovery?
biorap said:
Thank you for your clarify.
Is it possible to use stock recovery when i flash a custom rom via fastboot mode? I mean; do i have to use twrp when i wanna flash a custom rom? Is it possible to use custom rom with stock recovery?
Click to expand...
Click to collapse
Have you read?
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
Related
So I tried to change the ROM of my phone because the vendor's one had malware but it was worse, my phone is stuck at boot screen and can't do anything with it.
First I tried to install a ROM with TWRP, it installed but it was just a black screen, you could only see the battery status.
Then I tried to install the global ROM that is on the official xiaomi site but it didn't work and it locked my phone.
Now I can't use TWRP, please help me. I am desperate.
Miflash isn't detecting the phone, but the PC does cause it listed under Android Phone->Android ADB Interface on device manager.
1st:
http://en.miui.com/thread-277276-1-1.html
Once you rebooted it into download mode, use this:
http://en.miui.com/thread-254606-1-1.html
My PC is no longer detecting the phone, only detects Qualcomm 9008
Ok, it is working till the miflash step it says "receiving hello packet" in red
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Feriol said:
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-to...t-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
After that I use miflash?
Failed after second command
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the device is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Benz83 said:
Hello guys, i have a redmi 3s china version, so i try to find global version, i installed all driver and try to use with miflash that:
land_global_images_V7.5.9.0.MALMIDE_20160805.0000.29_6.0_global_470b843c10.tgz
(if i use xiaomiflash i get error) meanwhile with miflash i see device and i flash it but something wrong , i restart the phone i stuck on the logo MI
I try also to download land_global_images_V7.5.4.0.MALMIDE_20160523.0000.23_6.0_global_dc5d804271.tar
seems is the right firmware
So i try again to flash in fastboot mode with miflash but i get error like i have no permission.
So i extract the whole firmware on a dir where there is ADB files , same problem...the d: evice is locked
I try online the procedure with sms to unlock the bootloader ( i think is the only way, right?) or there are any other solution?
Maybe there is a stock rom to replace the original rom and put the global rom in another way?
Thanks in advanced
Bye
Click to expand...
Click to collapse
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
andrespm said:
After that I use miflash?
Failed after second command
Click to expand...
Click to collapse
After you run 'fastboot devices' is anything listed? Usually a string of numbers. If not then the computer isn't seeing your device.
Try rebooting the computer, and trying different USB leads and ports if possible and try again.
Using this method you don't have to use MiFlash, and is for when MiFlash doesn't work.
Once your phone is working again you can try again to install another ROM using traditional methods.
andrespm said:
Try this: https://www.reddit.com/r/Xiaomi/wiki/roms/flashofficial
or this: http://en.miui.com/thread-290959-1-1.html
Click to expand...
Click to collapse
Hello, i try the steps you give for EDL, after it the screen is not black but i see again the logo MI, i can go on fastboot mode but if i try to flash anykind of rom i get error "FAILED: remote: Critical partition flashing is not allowed)
other solution?
I think the only way is the unlock bootloader, but sincerally i dont know how it work. i did the steps online and the sim is on another device not xiaomi. I will get a sms from xiaomi with some kind of code? and after it how can use for bootloader?
There is another solution? I thinking....but why i cant use the original rom ?? always about the bootloader lock?
___
now i see another post ...use both volume to enter in download mode and on the miflash i saw port com 49, load a rom and start to flash it ...but....another error : The system can not find the file specified (0x80070002: Max buffer sector is 256)
___
This Morning i received the unlock code. When i use the tool stuck on 50℅
Hi, I have a serious problem with my moto G4 Play. I was on Android 7.1.1 but I prefer Android 6.0 so I tried to flash the stock ROM 6.0 of my device. It worked, but few minutes later my phone turned off.
Atm I only have access to fastboot mode but my Bootloader is locked, "USB debug" and "allow OEM unlock" are not activated.
I can do fastboot commands but I can't flash anything because Bootloader is locked, and if I try to use
Code:
fastboot oem unlock
, it says to allow OEM unlock in developer options first.
If I try to restart bootloader, restart recovery or factory reset it brings me back to fastboot mode with the following text :
"Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Fastboot reason : Failed to initialize partition table
CID Read failure
Invalid CID status 0x69
ERROR : No booting image fund. Skip to fastboot
Boot up failed"
Click to expand...
Click to collapse
Thanks
any idea ?
Thanks
As Fastboot log tell you to use Software Repair Assistant , so use the softwer in order to repair your device .
https://www.verizonwireless.com/support/knowledge-base-116950/
Good luck : )
Teddy Lo said:
As Fastboot log tell you to use Software Repair Assistant , so use the softwer in order to repair your device .
https://www.verizonwireless.com/support/knowledge-base-116950/
Good luck : )
Click to expand...
Click to collapse
It doesn't work
Because of the phone IMEI is : 0000000000000, the Software Repair Assistant stucks in "Processing of the device informations"
Query: Stuck in fastboot mode
Hi there, on the top of your phone / tablet, hold down the power button for at least 30 seconds. Your tablet should force shutdown and restart out of fastboot mode into your android OS. Hope this helps.
Then try to flash latest stock firmware from fastboot ,
like for example
extract from stock firmware :
boot.img
recovery.img
fastboot.img
system.img
now for each one write
fastboot flash boot boot.img press enter
fastboot flash recovery recovery.img
fastboot flash system system.img
etc.
But find stock firmware for your device , don't use lower version because probably you will brick your device , try just with latest one.
Good luck : )
ps0q said:
Hi there, on the top of your phone / tablet, hold down the power button for at least 30 seconds. Your tablet should force shutdown and restart out of fastboot mode into your android OS. Hope this helps.
Click to expand...
Click to collapse
The problem is an icompatibility beetween bootloader and OS because they are not in the same version so I'm stuck in fastboot no matter what I do
Teddy Lo said:
Then try to flash latest stock firmware from fastboot ,
like for example
extract from stock firmware :
boot.img
recovery.img
fastboot.img
system.img
now for each one write
fastboot flash boot boot.img press enter
fastboot flash recovery recovery.img
fastboot flash system system.img
etc.
But find stock firmware for your device , don't use lower version because probably you will brick your device , try just with latest one.
Good luck : )
Click to expand...
Click to collapse
Thanks but my bootloader is locked so I can't flash anything
I am having trouble rooting my Galaxy J7 Prime sm-j727t
Every Odin version I use with every TWRP tar file I try to use doesn't work. They either Fail or Odin stops responding when I try to load the tar file into the AP.
I've tried just using the CF Auto Root and those fail as well.
Any ideas what the issue is? I've been trying for two days with no success
Is your bootloader unlocked?
Emir Çetin said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
I thought Samsung phones come with bootloader unlocked already??
BramaKnox said:
I thought Samsung phones come with bootloader unlocked already??
Click to expand...
Click to collapse
You can check bootloader with dialer (search it).
Of phone has fastboot mode you can check bootloader with fastboot commands (search it too)
Emir Çetin said:
You can check bootloader with dialer (search it).
Of phone has fastboot mode you can check bootloader with fastboot commands (search it too)
Click to expand...
Click to collapse
When I put the phone in FastBoot mode I have the following options
Reboot System Now
Reboot to Bootloader
Apply update from ADB
Apply Update from SD card
Wide data/factory reset
Wipe Cashe partition
Mount /system
View recovery logs
Run graphics test
Power off
Lacking storage booting
1-Install your phones drivers on your PC.
2-Install adb and fastboot tools. https://www.addictivetips.com/android/download-adb-and-fastboot/
3-Reboot to fastboot.
4-Connect your phone with USB cable.
5-Open command prompt in adb and fastboot folder
6-Type fastboot devices (If you don't see your device there is a problem in drivers or fastboot)
7-Type fastboot oem device-info
You can check your bootloader status in that screen.
Emir Çetin said:
1-Install your phones drivers on your PC.
2-Install adb and fastboot tools. https://www.addictivetips.com/android/download-adb-and-fastboot/
3-Reboot to fastboot.
4-Connect your phone with USB cable.
5-Open command prompt in adb and fastboot folder
6-Type fastboot devices (If you don't see your device there is a problem in drivers or fastboot)
7-Type fastboot oem device-info
You can check your bootloader status in that screen.
Click to expand...
Click to collapse
Am I doing something wrong here ? see attached for screnshot
Emir Çetin said:
1-Install your phones drivers on your PC.
2-Install adb and fastboot tools. https://www.addictivetips.com/android/download-adb-and-fastboot/
3-Reboot to fastboot.
4-Connect your phone with USB cable.
5-Open command prompt in adb and fastboot folder
6-Type fastboot devices (If you don't see your device there is a problem in drivers or fastboot)
7-Type fastboot oem device-info
You can check your bootloader status in that screen.
Click to expand...
Click to collapse
I tried a some other steps. Tried using the video on youtube on a tut. When I get to the oem unlock I just get stuck with a msg sayng "waiting for any device" my device is plugged in, from what I know I have updated the samsung drivers (from previous attempt of other methods) the adb bootloader cmd did put my phone into fastboot mode
(White box, blue arrow point down with a straight line under the point)
(Blue screen with Downloading...)
do not turn off target
What am I missing here?
I tried rooting TWRP 3.2.3. with Odin on the phone again and it still failed
Does anyone else have any more insight to a possible solution?
Have you checked bootloader with dialer?
BramaKnox said:
I am having trouble rooting my Galaxy J7 Prime sm-j727t
Every Odin version I use with every TWRP tar file I try to use doesn't work. They either Fail or Odin stops responding when I try to load the tar file into the AP.
I've tried just using the CF Auto Root and those fail as well.
Any ideas what the issue is? I've been trying for two days with no success
Click to expand...
Click to collapse
Witch android you are?
My Realme gt2 pro RMX3300 in bootloop after i try to install global rom by fastboot , I still able to enter fastboot mode and the bootloader is unlock , can any one help to solve the problem and back to the china rom again
what's the question with fastboot? just flash the partitions
Code:
fastboot flash <partition> <file>
aIecxs said:
what's the question with fastboot? just flash the partitions
Code:
fastboot flash <partition> <file>
Click to expand...
Click to collapse
Can you help with more details and the steps how to install the china rom again to fix the bootloop problem
unpack the ROM. open cmd.exe and cd into directory. type dir to list files. select terminal output with mouse, copy content with enter key. paste the file list from terminal here in [CODE]tags[/CODE]
I am stuck in bootloop and can access fastboot mode tii but have a problem, low battery and I don't seem to be able to charge the phone so I can't flash anything... Any hope for me??
stop boot-loop, enter fastboot
If I enter fastboot the phone doesn't charge in fastboot mode, and anything I try to do gives me an error due to low battery levels, but I can't charge the phone because even if I power off from fastboot mode the phone restarts itself to a bootloop and so on...
after instant ubl i got notice dm-verity corruption, and i fastboot flash vbmeta still not working. any1 can help?
kaye48 said:
after instant ubl i got notice dm-verity corruption, and i fastboot flash vbmeta still not working. any1 can help?
Click to expand...
Click to collapse
Any news on this?
I also have it, have to press a button in order for it to boot, each time.
Did you try fastboot flash vbmeta --disable-verity --disable-verification vbmeta.img when flashing vbmeta.img?
What fixed it for me was using the vbmeta file that is provided in this recovery, and apply the command.
Trying the fastboot flash vbmeta --disable-verity --disable-verification vbmeta.img command with the original vbmeta, extracted from my ROM somehow did not do the trick.
That's strange! In the future I'd try re-downloading and extracting the image and trying again; I've found that this fixes strange bugs surprisingly often
dm-verity corrupted fix after unlocking bootloader:
Plug your phone in fastboot mode to PC and open command prompt in platform tools.
Type:
fastboot oem cdms
inrope said:
dm-verity corrupted fix after unlocking bootloader:
Plug your phone in fastboot mode to PC and open command prompt in platform tools.
Type:
fastboot oem cdms
Click to expand...
Click to collapse
Worked for me, thanks!
inrope said:
dm-verity corrupted fix after unlocking bootloader:
Plug your phone in fastboot mode to PC and open command prompt in platform tools.
Type:
fastboot oem cdms
Click to expand...
Click to collapse
Worked for my Xiaomi Redmi 10A. Thank you.
inrope said:
dm-verity corrupted fix after unlocking bootloader:
Plug your phone in fastboot mode to PC and open command prompt in platform tools.
Type:
fastboot oem cdms
Click to expand...
Click to collapse
Bro Thank you VERY VERY Much it Fixed because i unlock bootloader and i got the error dm verity even install img and fastboot oem cdms worked! | and becuase 168 hours i can't wait i install different exe file now it fixed! thank you | i make this account right now
to thanks | im from philippines
Hi i have an redmi note 11s it was showing dm-verity corruption earlier and then now it just wont boot at all not even to fastboot or recovery.. anyways i still can save this phone? its only 1 year and 1 month old...
How is that? Can anyone show me a tutorial please? My mom's xioami is showing this error and I don't know how to fix It, I have only found YT videos in Idian but nome of It worked.
inrope said:
dm-verity corrupted fix after unlocking bootloader:
Plug your phone in fastboot mode to PC and open command prompt in platform tools.
Type:
fastboot oem cdms
Click to expand...
Click to collapse
Could you show me how you did It step by step please? I would really appreciate it
malex174 said:
Worked for me, thanks!
Click to expand...
Click to collapse
JJLechadores said:
Bro Thank you VERY VERY Much it Fixed because i unlock bootloader and i got the error dm verity even install img and fastboot oem cdms worked! | and becuase 168 hours i can't wait i install different exe file now it fixed! thank you | i make this account right now
to thanks | im from philippines
Click to expand...
Click to collapse
Hi, I'm also from the philippines. can you help me? I'm having the same issue
For anyone facing this issue on Realme devices, or any other devices, here's how you can solve it without resetting or wiping out your data:
Steps:
Turn off your phone.
Press the volume down + power button.
Release both buttons once the Realme logo appears.
Select the recovery mode option.
Choose your preferred language.
Select the reboot option.
By following these steps, you should be able to resolve the issue without losing any of your data.