Hello all,
So i had tried every firmware out there for 2/16gb X96 max plus. Turns out this box is a totally different model the Q1 Android 9 System_as_root, no ramdisk.
The WiFi/ethernet and Kernel are different from the rest
So far I've had slimbox(with magisk) I don't know how @SlimHouse managed to root it.
All the X96max plus versions of twrp work on him including the X96max official twrp.
The stock is really smooth and actually OK. So I would like to root and maintain it...
What I cannot do is get this new box revision of "Q1" rooted.
So far I have tried :
1. Twrp flashing magisk 21.4.zip with Dm Verity..zip.
2. Cat /dev/block/boot > /sdcard/boot. Img and tried patching the boot partition with magisk.
3. Tried extracting the boot.img using Amlogic tools (and got lost)
Does anyone know how I can install magisk on this, it seems strange I can flash the zips and install twrp to recovery but I can't obtain root.
Thanks in advance, as always....appreciated.
Regards
did you make any progress with this since asking ?
I've gotten myself a X96Max Plus2 that comes rooted without a superuser app or even a root switch. I don't want a box that's slapped together by manufacturers that barely give a f*#k offering root access to whomever asks. I want magisk on this thing!
getting definitive info is turning out to be harder than I thought, I discovered that settings names it differently to it's packaging. all material on the box says S905X3, but AIDA64, Dev Check and other apps only mention a codename Franklin. searching that brought me to a spec page saying it was S905X2.
how many boxes are called a variation of t95, how many of x96 ? kinda annoyed right now.
3mel said:
did you make any progress with this since asking ?
I've gotten myself a X96Max Plus2 that comes rooted without a superuser app or even a root switch. I don't want a box that's slapped together by manufacturers that barely give a f*#k offering root access to whomever asks. I want magisk on this thing!
getting definitive info is turning out to be harder than I thought, I discovered that settings names it differently to it's packaging. all material on the box says S905X3, but AIDA64, Dev Check and other apps only mention a codename Franklin. searching that brought me to a spec page saying it was S905X2.
how many boxes are called a variation of t95, how many of x96 ? kinda annoyed right now.
Click to expand...
Click to collapse
Yes you can use slimbox .. That'll do it.
Please note you will have to use USB twrp from the update option to flash a magisk patched.img to the mmcblk0 boot partition yourself..after you've flashed slimbox firmware. (sounds worse than it is)
It's a bit pernickety but you'll grasp it... And works well.
Goto the slimbox rom thread s905x3.
Off the top of my head (it was two boxes ago)
Here :
X96Max Plus
CPU: Amlogic S905X3 GPU: G31™ MP2
slimboxtv.ru
And here :
Post in thread 'project SLIMBOX' https://forum.xda-developers.com/t/project-slimbox.4152049/post-83528517
Should have everything you need.
I actually done well with that little box.. Before upgrading to ugoos
Regards
I tip my hat to you sir
3mel said:
I tip my hat to you sir
Click to expand...
Click to collapse
Hi, I have x96max plus 4/32 but for some reason wifi keeps dropping and shows this message unknown ssid , I tried everything flashed with several roms and still same issue please help. Thanks n Regards
jack2023 said:
Hi, I have x96max plus 4/32 but for some reason wifi keeps dropping and shows this message unknown ssid , I tried everything flashed with several roms and still same issue please help. Thanks n Regards
Click to expand...
Click to collapse
I'm not the right guy to ask.
Hi
Can someone help me root My X96x Max Plus
I have the X96 Max Plus 100 model
Thanks
Related
Even the auto-search after entering thread title returned only threads with 0 replies...
So i have some no-brand chinese MT6580 running Lollipop 5.1 - not KitKat.
All the automatic and semi-automatic recovery porting tools work only for GB/JB/KK
Sadly the MT6580 kernel source was never leaked, so no compiling also.
Any way to get anything working? i would be even happy with a non-Touch CR...
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
TWRP for MT 6580 w/ lollipop 5.1
blakegriplingph said:
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
Click to expand...
Click to collapse
I've hacked together a TWRP image for a FiGO "Virtue 2", 512MB, 8GB, MT6580, 5.1 but it is larger than the upload limit so I can not attach it for you. It seems to work with the possible exception thus far of not finding OTG storage, an issue which shall not keep me up at night. Installs, backs up, recovers ..... so far so good.
DISCLAIMER: As everyone says, use at your own risk. If the aliens come and take away your house pets or you experience any other device related or coincidental calamity of any kind, there's nothing I can, should, or will do about it.
Used the Carliv Image Kitchen, my stock recovery image, a TWRP image I found for an Infinix "Hot 2" and the general procedure found at this URL
http://www.xposedgeek.net/how-to-port-philzctrcwmtwrp-recovery-to-your-phone/
If you have the flash stuff for your factory build like I did it is probably a piece of cake, because I am pretty new at this sort of thing and if it can be screwed up I usually can find the way to do so. Took about an hour including thinking time before hitting the button. I was either brave or stupid and didn't even set up a virtual test first, but it works :cyclops: The Almighty must approve of my actions at some level.
Proceed with appropriate caution.
Hope that helps.
nezlek said:
I've hacked together a TWRP image for a FiGO "Virtue 2", 512MB, 8GB, MT6580, 5.1 but it is larger than the upload limit so I can not attach it for you. It seems to work with the possible exception thus far of not finding OTG storage, an issue which shall not keep me up at night. Installs, backs up, recovers ..... so far so good.
Hope that helps.
Click to expand...
Click to collapse
The lack of OTG support is indeed something of a shame, but at least this is something. Thanks for the tip mate!
EDIT: OK, so I managed to port TWRP to my device. Only problem is that I had to fiddle with the partitions, and for some reason there seems to be no other way to flip the screen back other than compiling another TWRP image or google my way through a compatible prebuilt by some kid online. I'll post my flipped-screen version ASAP when I get to compile that thing myself.
Sorry for the double-post, but here's the source-built port I made for inverted framebuffers:
https://github.com/huckleberrypie/android_device_alps_z6u030
I made it for clone devices in mind, but feel free to port or fork this in case you need to use this on your phone.
blakegriplingph said:
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
Click to expand...
Click to collapse
Sir please port samsung c7 clone
Hi, I have successfully ported TWRP 3.0.2-0 to the Sunvell T95Z Plus.
You can flash it with Rashr app, boot it on Micro SD with the "Update&Backup" app and a dummy update.zip (rename it to recovery.img) or with the toothpick trick on boot. (rename it to recovery.img)
Download link for Marshmallow: https://mega.nz/#!9sZEXbAY!_WNw-w79ATor3IRZpBCic7xdlA73KOqWpUWQWfqREoQ
A bad thing, there is a problem for restoring System partition on "Superceleron V1 Final ROM" with TWRP, if you do this you will have
"Error during restore process.
extractTarFork() process ended with ERROR: 255"
and you will not be able to boot. I'm sure that come from the ROM, an other user on Freaktab.com have the problem on the same ported ROM on NEXBOX A1 box: http://freaktab.com/forum/tv-player-...481#post623481
The only way to repair is to flash firmware again with USB Burning Tool. The restore feature works fine with the stock ROM.
UPDATE 09/02/2017
Updated TWRP for 7.1.1 firmware (Nougat): https://mega.nz/#!poAmXTTL!geVautNHmuTH4egOGw9mTcO7L37oVN95aHqTrGCqRVE
I rooted the box with Magisk but should works with SuperSu too.
Thanks to @simonjonnemeth for giving me the link of the firmware on post #18
Have a nice day
Hi! It will work on other s912 devices? I have Beelink GT1.
Thank you!
jefferzombie said:
Hi! It will work on other s912 devices? I have Beelink GT1.
Thank you!
Click to expand...
Click to collapse
I don't know, it will probably boot (pretty sure) but you will probably not see any partitions. You can try and feedback
thanks, it works!
Thanks! Works on my T95Z-plus. The only issue I've found so far is that OTA system updates don't work. Once the update has downloaded the box reboots into recovery (TWRP). Then sits there. Nothing obvious to install. Reboot to system shows old version not new version.
The official TWRP position seems to be that they don't support OTA system updates, so maybe there's no fix for this. If you know of one please let us know. TheT5ZP0033 update is waiting to be installed but I have no idea how to do it with TWRP installed.
Update: I reasoned that the best method of applying the OTA would be to restore the original recovery, apply the OTA update, and then again flash TWRP. I found two different versions of the the recovery.img here:
https://mega.nz/#F!xlwAmIrD!Dg_1Kqgl1Jp0eGB67fV7Cw
One is individually listed, the other is in the zip. Neither worked. After the OTA download the box tried to boot the recovery and crashed with a dead android with an open door on his chest. Luckily a simple power off-on recovered.
Anyone know of another source of working recovery.img? Or, if there's somebody who has T5ZP0032 running and hasn't yet replaced the stock recovery, maybe you could do us a favor and dd the recovery block to a file on external storage and post a link. Something like:
dd if=/dev/block/recovery of=<myStorageDevice>recovery.img
thx man, i wil try it tonight \m/
I'm guessing some of these T95Z boxes come with an unlocked bootloader. I have an Evanpo T95Z and I have confirmed with the manufacturer that the bootloader is locked. Anyone know how to unlock the bootloader. It already came rooted.
rrvuhpg said:
Hi, I have successfully ported TWRP 3.0.2-0 to the Sunvell T95Z Plus.
You can flash it with Rashr app, boot it on Micro SD with the "Update&Backup" app and a dummy update.zip (rename it to recovery.img) or with the toothpick trick on boot. (rename it to recovery.img)
Download link: https://mega.nz/#!9sZEXbAY!_WNw-w79ATor3IRZpBCic7xdlA73KOqWpUWQWfqREoQ
A bad thing, there is a problem for restoring System partition on "Superceleron V1 Final ROM" with TWRP, if you do this you will have
"Error during restore process.
extractTarFork() process ended with ERROR: 255"
and you will not be able to boot. I'm sure that come from the ROM, an other user on Freaktab.com have the problem on the same ported ROM on NEXBOX A1 box: http://freaktab.com/forum/tv-player-...481#post623481
The only way to repair is to flash firmware again with USB Burning Tool. The restore feature works fine with the stock ROM.
Have a nice day
Click to expand...
Click to collapse
How did you unlock the bootloader?
Presto2601 said:
How did you unlock the bootloader?
Click to expand...
Click to collapse
I have a Sunvell T95Z (official, not clone) and the bootloader is unlocked out of the box
rrvuhpg said:
I have a Sunvell T95Z (official, not clone) and the bootloader is unlocked out of the box
Click to expand...
Click to collapse
I wish I knew that some of these T95Z boxes had a locked bootloader before I bought my Evanpo branded one. As far as I know Sunvell does not have a 3 GB RAM version yet, do you know if there is another brand of T95Z with 3 GB RAM that has an unlocked bootloader?
---------- Post added at 01:23 PM ---------- Previous post was at 01:00 PM ----------
Ok, did more research and found the Sunvell branded T95Z with 3GB/32GB and ordered one online. Hopefully all the Sunvell versions have unlocked bootloaders. I really want to load your TWRP. What version of Android are you running? Does that matter with your version of TWRP?
Presto2601 said:
I wish I knew that some of these T95Z boxes had a locked bootloader before I bought my Evanpo branded one. As far as I know Sunvell does not have a 3 GB RAM version yet, do you know if there is another brand of T95Z with 3 GB RAM that has an unlocked bootloader?
---------- Post added at 01:23 PM ---------- Previous post was at 01:00 PM ----------
Ok, did more research and found the Sunvell branded T95Z with 3GB/32GB and ordered one online. Hopefully all the Sunvell versions have unlocked bootloaders. I really want to load your TWRP. What version of Android are you running? Does that matter with your version of TWRP?
Click to expand...
Click to collapse
If you look on Sunvell official website all T95 devices have the same spec: S912 soc, 2GB/16GB and Android 6. If you found a different config it's probably a clone. If your device have Android 7 the kernel will probably be different and TWRP will probably not works, the better way to be sure is to try
rrvuhpg said:
If you look on Sunvell official website all T95 devices have the same spec: S912 soc, 2GB/16GB and Android 6. If you found a different config it's probably a clone. If your device have Android 7 the kernel will probably be different and TWRP will probably not works, the better way to be sure is to try
Click to expand...
Click to collapse
I used this on my 3/32 gig Android 6.01 box and it booted fine .. I was not able to mount ex_Sdcard but was able to use USB-OTG
Their is no option in the Backup to backup Firmware is their anyway to add this as My box has a totally different Wifi chip than all those on Freaktab (FN-Link 8223A-SR F04001) and I would really hate to totally loose Wifi because of a Rom flash.
I did a Full backup of all the partitions but I'm just not sure Wifi would be restored without the original Firmware backed up
Thanks for posting this
rrvuhpg said:
Hi, I have successfully ported TWRP 3.0.2-0 to the Sunvell T95Z Plus.
You can flash it with Rashr app, boot it on Micro SD with the "Update&Backup" app and a dummy update.zip (rename it to recovery.img) or with the toothpick trick on boot. (rename it to recovery.img)
Download link: https://mega.nz/#!9sZEXbAY!_WNw-w79ATor3IRZpBCic7xdlA73KOqWpUWQWfqREoQ
A bad thing, there is a problem for restoring System partition on "Superceleron V1 Final ROM" with TWRP, if you do this you will have
"Error during restore process.
extractTarFork() process ended with ERROR: 255"
and you will not be able to boot. I'm sure that come from the ROM, an other user on Freaktab.com have the problem on the same ported ROM on NEXBOX A1 box: http://freaktab.com/forum/tv-player-...481#post623481
The only way to repair is to flash firmware again with USB Burning Tool. The restore feature works fine with the stock ROM.
Have a nice day
Click to expand...
Click to collapse
Any idea if this willl work on the h96 pro plus on android 7.1?
jonny_blagwind said:
Any idea if this willl work on the h96 pro plus on android 7.1?
Click to expand...
Click to collapse
No it will brick your device.
rrvuhpg said:
No it will brick your device.
Click to expand...
Click to collapse
Any idea if anyone's working on porting it for 7?
I'm working on a theory that if I could install magisk to verify play store, change the build prop to a Sony 4k tv or similar then be able to install android tv launcher does that sound believable?
What about the T95Z with the latest 7.1 firmware? I'm getting desperate for root access but I don't want to flash this and find out that my device won't boot because I really don't want to have to go through re-flashing it again. SuperSU was successful with a normal installation, but then it wouldn't boot past the T95Z logo and hunting down the official 7.1 ROM for this device was a nightmare but I found it.
simonjonnemeth said:
What about the T95Z with the latest 7.1 firmware? I'm getting desperate for root access but I don't want to flash this and find out that my device won't boot because I really don't want to have to go through re-flashing it again. SuperSU was successful with a normal installation, but then it wouldn't boot past the T95Z logo and hunting down the official 7.1 ROM for this device was a nightmare but I found it.
Click to expand...
Click to collapse
Hi, I can do it but have you a link to the 7.1 firmware for the 2/16Gb T95Z?
rrvuhpg said:
Hi, I can do it but have you a link to the 7.1 firmware for the 2/16Gb T95Z?
Click to expand...
Click to collapse
Absolutely. I found it over on the freaktab forums (http://freaktab.com/forum/tv-player...5z-plus-3gb-32gb-wifi-chip-ap6255-help-needed).
The thread's for the 3/32gb variant, but firmware for both variants is on there.
MEGA link: https://mega.nz/#F!YJ0nTC4Z!qBz6gmJCjwHn0HtlVe2apw
I didn't realize it but this firmware already has ROOT access, though somehow with no superuser app so I didn't realise at first, but I still wouldn't mind a working build of TWRP because I would like to install Magisk.
This was a nightmare to find so I imagine it'll be very useful to other T95Z owners.
First post updated with TWRP for Nougat !
rrvuhpg said:
First post updated with TWRP for Nougat !
Click to expand...
Click to collapse
Thank you very much, and thanks for the mention.
Dear Team
Can i have the latest firmware for docooler M9s pro s905 3 GB 32GB
I have a TV box with Android 5.1 and as i can see people are talking about 7.1, Is there any way to have a link or a file to update my old firmware
OTA applications is not supporting this product and the manufacture them self is not answering my requests also am not finding any link over the internet has the latest firmware file.
Thank you so much for your support.
It seems that no one is using this kind of BOX!
dragons79 said:
Dear Team
Can i have the latest firmware for docooler M9s pro s905 3 GB 32GB
I have a TV box with Android 5.1 and as i can see people are talking about 7.1, Is there any way to have a link or a file to update my old firmware
OTA applications is not supporting this product and the manufacture them self is not answering my requests also am not finding any link over the internet has the latest firmware file.
Thank you so much for your support.
Click to expand...
Click to collapse
rom 3gb/32gb 7.1.x
https://mega.nz/#!6N4TwKAI!7Gt28mgv5R_Y_ZfkD1Ik8MSgFdzFCNgJ2i2a813ja5U
dont update super su, it crashes and stock in boot...
Hello,
Is there any Android TV Rom for this box, please?
I have tried atvxperience rom, PoisonATV V4.8 S905X but this box does not load these roms.
Am looking for an Android TV Rom if you know one, please share a link?
Kind regards
guufaan said:
https://mega.nz/#!6N4TwKAI!7Gt28mgv5R_Y_ZfkD1Ik8MSgFdzFCNgJ2i2a813ja5U
dont update super su, it crashes and stock in boot...
Click to expand...
Click to collapse
I thinks this image is damaged? In TWRP it says that img is to large and USB Burn Tool is unable to open the file?
Maybe someone can help me?
guufaan said:
dont update super su, it crashes and stock in boot...
Click to expand...
Click to collapse
Is this ROM good even for 2gb/16gb model?
3g/32g
bertolaso said:
Is this ROM good even for 2gb/16gb model?
Click to expand...
Click to collapse
No it's not, but i stopped using the box, now im on H96+ that work better 4 me,
i have flashed the 2/16 Rom once on the bigger sister, the box showed after that only the 2/16gb rom/ram... and worked,
Me work
i just bricked mine using that image; it showed "upgrading" for a about 5 seconds and then puf switched off, now no blue light, only the red (power) one :-(
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
LaPxWaSs said:
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
Click to expand...
Click to collapse
I just flashed https://www.atvxperience.com/download/s912-v2ff-ddr-lpddr-ram-18-oct-2018/ successfully on mine.. Used the s912_LPDDR_atvXperience_v2FF.img file.. So far so good.. Flashed using USB to USB, and USB burning tool 2.1.6.. Android TV 7.1.2.. LPN1 32g/3g ddr4.. Only one I've found so far but was worried about hard brick so waiting till someone else confirmed it
Edit: Well, not sure now.. Seems every app that I've downloaded (Kodi, Chrome, VLC, the usual) minus showbox works fine but a lot of the apps that were originally on there (atvx apps) just crash out.. May have been a bad flash or I'm missing something simple. Will try reflashing later but it definitely doesn't brick it..
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
LaPxWaSs said:
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
Click to expand...
Click to collapse
It doesn't matter what the serial number is. All that matters is the architecture of the components of the ROM you're installing match up with the architecture of the box you have. In your case, any of the ROMs supporting the Amlogic s912 Octocore chipset should work on a Beehive GT1 Ultimate.
It sounds like a mistake you're making in the flashing process that is bricking your device, not the fault of the actual ROM.
Anyone know where to get Android 9.0 firmware for gt1_313M0 ? Is Android 6.0.1 really the final version of Android for this?!?!
I own the Bqeel 2019 Android 8.1 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K Smart TV Box .
I have tried many custom roms and none of them seem to work in the correct manner. I am able to use the latest USB burning tool but lot of these custom roms will flop on me after the install process. I feel like there is something usually wrong with the WIFI side. if it is not a wifi problem, then it is the remote control.
I have yet to find a custom rom where I can load and then use the device the way it is suppose to be. I want the remote to work correctly. Keep in mind that I do have a direct Ethernet connection for this device.
I have contacted the original manufacturer hoping that they can send me the original default firmware.
Back to the topic, i am interested in the best, the latest, and the one the works the most for this device. All solutions have failed for me thus far.
ps: i will re try the following .img files that I was able to obtain from FreakTabs
- XTM_ATV_X96_4_4 (this one will not connect to the internet directly. it needs a cell phone or tablet, so i can transfer over the Wifi and Google Account settings. For some reason, this is impossible because it keeps asking for my WIFI password which i have entered many times in the device);
- Poison_S905x2_V2.0 (this one is easy to install but after the install, the GUI seems stuck. I can't open up any apps, and the weather icon is always spinning).
Again, i have tried maybe 5 different custom roms from freaktabs (i am sure they are posted here) and none of them seem to work.
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
alilous1000rr said:
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
Click to expand...
Click to collapse
I have the same problem.
I have tried many custom roms but nothing seems to work. Wifi and Bluetooth issues is a problem.
I too need STOCK firmware. I have extra device that is not been messed around with but i do not know how to make back up from stock rom. If i can make stock up rom with one app, i will do it ASAP and perhaps share it.
Edit: So I am able to obtain a back up of the stock firmware via Twrp from my second device, but it is not compatible with the other Bqeel system. All i see is the Bqeel Boot Logo.
I am still able to boot into recovery, and i can also install other custom roms (those custom roms stink).
I still need the orgiinal stock firmware in .img or i need a custom rom that actually works really great.
For those who want to purchase this device, you can but do not mess with custom roms. Just remove default apps and enjoy the default OS.
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
alilous1000rr said:
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
Click to expand...
Click to collapse
I did the same thing. They sent me the stock firmware. the device works great now! there is another hiccup though. For usb burning tool, you will need some license files. when you load the .img file in the program, it will not accept it. You need the license files (just transfer them in the directory in usb burning tool)
here is the link for license files and stock firmware.
https://mega.nz/#F!TvoShAAK!Jd0X15aoHWVdOf1rrYPc0g
I tried that firmware in my box and it freezes on logo!!!
any news for this device? I have tried many custom OS but none work due to missing drivers.
LooseEnd85 said:
I did the same thing. They sent me the stock firmware. the device works great now! there is another
Click to expand...
Click to collapse
What did you actually wrote into the message? I'm in touch with them since a few days but I cannot go over than "we can replace the unit"!
BTW, my Device Build Fingerprints: Amlogic/u211/u211:8.1.0/OPM1.171019.011/20190402:user/release-keys
Bqeel 2019 Android 9.0 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K UHD Smart TV Box
Yes... it should have android v9 but it's a v8.1... I found the error when the Amazon return window was already closed...
https://www.bqeel.net/download.html
There are firmwares from bqueel
Hi
Can somebody now tell me if firmware from bqeel.net works or not becuse I've seen a loot that say it's stuck at logo screen or it won't boot
Does it work or no?
so far the best custom ATV ported ROM I've found for this box is here: https://forum.freaktab.com/forum/tv...ionatv__bqeel_u214-y8_max_1000m_s905x3-test57
it is due for an update but works as is. I also have a SlimBox ROM that works for the Bqeel but I'll have to upload that to my Mega folder and share the link.
EDIT: nevermind my boxi s the Y8 Max this is asking for the Y4 Max,.