Related
Today i try to root a Mediapad 10 ,, i use the files than are sticky in the this section on mediapad ... now to do the D.O.S exe called Root : The MediaPad stuck in the logo dont enter in recovery via buttons, Don't enter to the android robot recover zip update,,,, And no nothing with the set.
I use the file : Auto_recovery_installer_for_huawei_mediapad ,,, but don't recognize the device,,, Please someone can gimme a little bit of help?
Best Regards !!
Amartt said:
Today i try to root a Mediapad 10 ,, i use the files than are sticky in the this section on mediapad ... now to do the D.O.S exe called Root : The MediaPad stuck in the logo dont enter in recovery via buttons, Don't enter to the android robot recover zip update,,,, And no nothing with the set.
I use the file : Auto_recovery_installer_for_huawei_mediapad ,,, but don't recognize the device,,, Please someone can gimme a little bit of help?
Best Regards !!
Click to expand...
Click to collapse
Reading and reading for long hours ,it seen than the only files that could bring back to the normality to my tablet are the next file:
Huawei_S10-201u_V100R001C233B001_Root_Repair_Downgrade.7z
But the link than store this files are from Russia is called 4PDA and this files are corrupts .Cause when try to unzip always show a error when a try to unzip . :crying:
Please need badly the files ... somebody have this files ???
Problem fixed.. i used this files and then make a upgrade . Auto_recovery_installer_for_huawei_mediapad.zip .:highfive:
help needed
I also need help regarding mediapad link 10. Mic volumes in my link is so low person on tne other side can hardly hear me, usally i use skype.
It is runing 4.1.2 is this normal or should i go for warranty claim can rooting and installing a newer rom can solve this porblem?
Unbrick Oppo R5
Since oppo forums support is minimal and a lot of Oppo R5/ R5s owners are facing difficulties flashing new rom and since Oppo is unbrickable here are a guide as posted to oppo forum members by the member Ricky.
I had clear instructions not to post this tool anywhere BUT THEY DON’T SUPPORT ANY DEVICE and I have to break my promise as they broke any kind of support.
This community (XDA) is to help all members
The tool works with windows 10 and not only with windows 7 as they mention in their instructions
Packages you have to download first
1- Firmware ColorOS https://www.partage-facile.com/LM6Y85FF7Z/r8106ex_11_a.16_150806.tar.bz2.html
File Name: R8106EX_11_A.16_150806.tar.bz2
Size: 1.4GB
MD5: F85ED63BA637B559976D9BFF0AED0187
2- Instructions:
https://drive.google.com/file/d/0B3AWkNVCRSNVZGNRUE1rQW5YOFk/view?sid=
3- Driver : http://en.oppo.com/downloads/firmware/driverForFind5.rar
Mirror for driver http://www109.zippyshare.com/v/MEMiPlOv/file.html
Attention
a-Unbrick tool will wipe all data on your device including photos and music etc, if do you want to reserve your data please make o back up on your PC
b- After unbrick the first time power up take around 5-15 minutes
c- The most important things are to install the driver. For windows 10 you must enable unsigned signature verification through windows advanced settings (google it) prior driver installation.
d- In order to shut phone completely hold the power button for 8 -10 secs
How to use the tool
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
amadoro said:
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
Click to expand...
Click to collapse
For R5 use 14016.
mermigas said:
For R5 use 14016.
Click to expand...
Click to collapse
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
amadoro said:
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
Click to expand...
Click to collapse
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
mermigas said:
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
Click to expand...
Click to collapse
Thank you so much. it worked. Not my Oppo r5 is back alive.
Where is the download?
Is it normal that when I hit the download link there appear aliexpress??
I thought I had bricked my R5 but while trying to follow this guide it wasn't showing up in the "Ports" section of the Device Manager. I found that my phone still had fastboot, so I used it to install latest TWRP and then the repair rom. And now my phone is finally back to working condition! I hadn't modified in any way my phone and one day it got stuck at the logo. Anyway, thanks for the guide Mermigas!
anyone mirror pls
mega
[email protected] said:
anyone mirror pls
Click to expand...
Click to collapse
[dead link]
If it asks for a key leave it blank
Kushracer said:
https://mega.nz/#F!q8YFEJyB
If it asks for a key leave it blank
Click to expand...
Click to collapse
No asking for decryption key
mirror
Uploading here: R5S Unbrick Tools
Please help
After i have done all those instructions: my phone was completely dead(no more display and can't use any buttons).
Please what should i do for revive that.
Link Broken
cpuld you re-load the link of Color Os firmware please?
Its not valid now =(
Number for R5S?
Hi, I tried the 14061 for my OPPO R5S. Unfortunately it did not work. Now the phone is not starting.. help? Should I use another number?
Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
resadent said:
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
Click to expand...
Click to collapse
Maybe someone could place a foto with indicated pins (to make circuit on flash chip) to go into recovery mode ?
etemmu666 said:
Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
Click to expand...
Click to collapse
Head over to FreakTab, they have tutorials on how to unbrick it
Patrck744 said:
Head over to FreakTab, they have tutorials on how to unbrick it
Click to expand...
Click to collapse
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
rubbish
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
There might be a hardware change for those boxes, the Nexus ROM TV Stock thread has pics on what changed. Best to watch that thread since a solution might be posted soon
I am in the same situation. I tried the sd card burning method and also by the usb cable, but no success at all.
I have got m8s pro+ 2/16gb s905x, The device was purchased on the gearbest website.
some news from my yesterday fight:
sd card burning - many variants of rom, after restart, but on the mainboard there was not observed the reset button, only place named "k1" -> I soldered two points from "k1 place" to make a reset
after that
try by male-male usb cable and usb burning tool 2.0.8, Error result: [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
I tried 4 different firmware's, and the same happens every time. Can anyone suggest something?
I can copy whole error if it can help determine the problem.
found on the internet
Romcode / Initialize DDR / Read initialize status / USB Control setup error
-> An error occurs when memory chips do not match. Firmware with ubut for some, but sew on others. It remains to ask the seller about the original firmware: (or shovel (look) available.
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Cody57 said:
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Click to expand...
Click to collapse
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
etemmu666 said:
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
Click to expand...
Click to collapse
I will do the same....
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
I can help. My xiaomi mi box has just arrived, after a couple of hours of testing i can say, put that **** (m8s) to trash, buy xiaomi. I am happy that m8s was hard bricked now.
leonkoum said:
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
Click to expand...
Click to collapse
I trie so many roms... without success....:crying:
Cody57 said:
I trie so many roms... without success....:crying:
Click to expand...
Click to collapse
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
etemmu666 said:
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
Click to expand...
Click to collapse
I have a nvidia shield and I order a xiaomi mi box....
it was just to test a new box and it wasn't too bad.... before testing a new firmware
HELLO the solution for reinstall your rom
hello i have found the solution for you i have received my mecool m8SPRO+ today and i search button recovery
i have found this on freaktab :
You need to press the hidden reset switch (accessed via pinhole on bottom of case) when you connect the USB cable, and it's got to connect to the USB OTG jack, which is the one closer to the power jack.
or see on this video youtube on front panel : xxxxs://XXXX.youtube.com/watch?v=WpThZ2sgkhUt
or maybe same at this video an other place : xxxs://youtu.be/N27pAxtcDSg?t=268
if is not clic take a pinhole if is ok you arrived after bootloader MECOOL ON menu
and take a factory reset
if you don t boot
try method with microsdcard take on sdcard the firmware ota here only the file M8SPRO ota
xxxxs://mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
and renom on update.zip
then take power off if is ok you screen apperead with logo android green updating
or do method with usb burning tools
replace xx on web link the correct http
Unbrick the M8S Pro+ 2/16
Hi everyone,
I know how you're guys feel... Is there any new idea or suggestions to unbrick the devices?
After OTA Update the box only shows red and blue at the same time, no boot, no detection of windows with reset button or / with holding the circuit shortcut at "K1".
Can't believe that Amlogic is even worse than the Rockchip boxes to unbrick...
How to factory reset mecool m8s pro plus ? S905w android tv os
Guys i am in trouble with new mecool m8s pro plus ATV i bought..
I am new to xda ..
On the setup
Ipaired my remote
And then connected to my wifi
I then chose the option to put my email and password for the account..it signed in but in the end it was asking for location access i gave it but then i receive an error saying google sign in has stopped
And now i am stuck ..even whei restart box always stuck at the same loop
Guys i dont know what to do...i havent even seen its home screen ..i am in the loop of setting up device
I think maybe faftory resetting it may solve it...but i dont know how to do it ..as i dont know how to open recovery mode...
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.