Hello,
i'm trying to root a Sharp B10 (SH-A01) with Magisk.
It would be nice if i could do this without unlocking because i want to keep the stock rom anyway.
First problem is that i can't find a custom recovery (TWRP, CWM) for this device from where i could install Magisk.
Then i found out that Magisk gives the possibility to root a device through the Magisk Manager App by patching the boot.img.
But the second problem is that i can't find the boot.img either. I spotted the boot partition on the device and tried to pull with adb but i would need an already rooted device to give the needed permissions.
Is there anything else I could do to get this thing rooted besides compiling my own TWRP for the device?
thanks a lot,
paul
Hello, i search the same.
paulquappe said:
Hello,
i'm trying to root a Sharp B10 (SH-A01) with Magisk.
It would be nice if i could do this without unlocking because i want to keep the stock rom anyway.
First problem is that i can't find a custom recovery (TWRP, CWM) for this device from where i could install Magisk.
Then i found out that Magisk gives the possibility to root a device through the Magisk Manager App by patching the boot.img.
But the second problem is that i can't find the boot.img either. I spotted the boot partition on the device and tried to pull with adb but i would need an already rooted device to give the needed permissions.
Is there anything else I could do to get this thing rooted besides compiling my own TWRP for the device?
thanks a lot,
paul
Click to expand...
Click to collapse
Neither Magisk nor TWRP is needed to root Android: Chainfire's SuperSu does the job. You flash its ZIP via stock recovery "adb sideload"
jwoegerbauer said:
Neither Magisk nor TWRP is needed to root Android: Chainfire's SuperSu does the job. You flash its ZIP via stock recovery "adb sideload"
Click to expand...
Click to collapse
Hi,
thanks for your answer.
I already managed to root this device. I got the boot.img with Wwr_MTK & SP flash tool (windows tools...), patched it with the magisk app and than flashed the patched boot.img
1. Unlock your bootloader enter in download mode Vol+ + Vol- + USB conected to pc (Keep in mind that by doing this you will lose your files, it is advisable to make a backup of your photos, music, etc.)
2. Once you start your cell phone install magisk manager, Choosing the boot.img file of your rom into the app (Tip: Only!!! If your model is SM-A015M Android 11 I leave you my own modified boot.img to flash:
File on MEGA
mega.nz
Otherwise, you can download the firmware (3.79 gb) and extract the boot.img from the firmware of your model SM-A015 M / F ... Android 10, Android 11... etc. And No need for pc
https://samfrew.com/model/SM-A015M/
3. The image will begin to flash
4. When it restarts you will have Root on the cell phone!
------------------------------------------------------------------------------------------------------------------------------------------------
Extra: If you need the custom recovery I give you the link with my TWRP which is installed through the Odin program on a PC (this step does not delete your files)
File on MEGA
mega.nz
Keep in mind that to install TWRP you must deactivate the DM-VERITY & FORCEENCRYPT DISABLER I leave it in a link:
Zackptg5 - Android
zackptg5.com
This is a module that can be installed via magisk, which is necessary to decrypt the system ... so once TWRP is installed, it is advisable to uninstall it via Magisk to avoid R / W errors
Hello, I updated to Q and can't get it rooted.
It bootlooped.
How can I root Android Q?
visit: h t t p s : / / twrp.me/site/update/2019/10/23/twrp-and-android-10.html
As, if now you cannot. For Android Q, it's still in research.
------------------------------------------------------------------------
Never tried but: ClockworkMod Recovery – a past alternative to TWRP custom recovery.
h t t p s : / / en.wikipedia.org/wiki/ClockworkMod#ClockworkMod_Recovery
Research over it & let me know if anything worked for you-!
I successfully roote Q with this ?
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
I just flash TWRP, format and flash custom rom. Rooted.
First of all. What device do you have and what exactly have you tried? Include references.
Remember first step is to search before asking.
Guys need to re root my device on android 10 cuz i had it root under android 9 and cannot use s health
Need to root to chanfe the build prop command to use s health
Also missing the heart monitor pressure
Please help me
G965f
StonebridgeGr said:
Guys need to re root my device on android 10 cuz i had it root under android 9 and cannot use s health
Need to root to chanfe the build prop command to use s health
Also missing the heart monitor pressure
Please help me
G965f
Click to expand...
Click to collapse
I would recommend you flashing custom firmware, like the one in my signature. Everything is working, including Security Folder.
Rooting S9 +
sarjarim said:
I just flash TWRP, format and flash custom rom. Rooted.
Click to expand...
Click to collapse
Which TWRP version you used and how did you install TWRP on a non-rooted phone? Do you not have to use Magisk to root the phone first?
xectis said:
Which TWRP version you used and how did you install TWRP on a non-rooted phone? Do you not have to use Magisk to root the phone first?
Click to expand...
Click to collapse
I just used the 3.3.1.1 from the TWRP site.
Flash TWRP is to root, so I did it b4 root.
1. OEM unlock
2. Flash TWRP with odin then boot to TWRP, samsung will restore if u normal boot.
3. Backup EFS
4. Format data wipe all
5. Dm verity, search newest from dr ketan
6. Flash custom ROM.
Magisk usually comes with the custom ROM.
sarjarim said:
I just used the 3.3.1.1 from the TWRP site.
Flash TWRP is to root, so I did it b4 root.
1. OEM unlock
2. Flash TWRP with odin then boot to TWRP, samsung will restore if u normal boot.
3. Backup EFS
4. Format data wipe all
5. Dm verity, search newest from dr ketan
6. Flash custom ROM.
Magisk usually comes with the custom ROM.
Click to expand...
Click to collapse
Magic! Thanks bro.
For Android 10 U9 bootloader, is not more possible flash custom binaries... even twrp!
G965FXXU9ETF5
hi im new to this but what do you mean by Q??
i have sprint s9+ sm-g965u1, can i root my phone now ?
Devilix said:
For Android 10 U9 bootloader, is not more possible flash custom binaries... even twrp!
G965FXXU9ETF5
Click to expand...
Click to collapse
This isn't true I flashed Twrp 3.5.091 via Odin, S9+ exynos android 10, then flashed Magisk 21.4.
When I got phone it was android 10 June 2020 security update. It then updated again to 21/02/2021 ota.. I was able to flash recovery twrp and root/debloat. Only problem I did find is that I cannot flash lineage 18.1 or any custom roms.
Regards
JeyKul said:
Hello, I updated to Q and can't get it rooted.
It bootlooped.
How can I root Android Q? No root method root android Q.
Click to expand...
Click to collapse
hey ,
1.install magisk manager on your phone
2.download the firmware from samfirmware for your model of phone to pc
3.download 7zip with lz4
4. use 7zip lz4 to extract boot img from AP(firmware)
5. send the xtracted boot.img to phone sdcard and use magisk manager to patch said image .
6. send the patched img to pc and use 7zip to create archive as boot.tar file
7. one you install the firmware as normal via odin (disable auto reboot ) go back and disconnect/reconnect usb from phone so it appears as added in odin once more.
8. add the boot.tar file to AP in odin and flash the phone , reboot system and install magisk manager again , go into magisk and it will reboot again to fix the root.
there is a video somwhere on youtube showing you better than ive tried to here.
this is by far he best way as you can still take ota updates because stock recovery is still present .
regards
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!
Downloads
SM-N981U/U1/W- Model
USERDATA_AIO_N981_FORCE_WIPE_10_10_21.tar.md5 --Use on android 10 or 11
This will force a wipe of data no mater what.
Odin3_v3.14.1_3B_PatcheD.zip
Note 20 Ultra SM-N986U/U1
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_N98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_N98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_N98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_N98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
Samsung Galaxy J6 SM-J600G Binary U9 and Android Version 10.
Rooting process please.
flash magisk in custom recovery
Hello FraSharp,
on smartphone (Samsung J600FN stock version Android10),
I install the Magisk.apk, after I download the boot.img (extracted on PC from the stockROM.zip)
launch magisk on this downloaded boot.img, then magisk returm a bootPatch.img
on PC
I pull the bootPatch.img
then flash this bootPatch.img on smartphone
At reboot, error with a corrupt message and going to a factory reset.
So, how do you install your Magisk?
I've tryed someany time to install twrp with magsik pls help
How do I install twerp recovery with magsik with out root or pc or 2 phones
twrp does not exist for this phone officially yet.
you also need an unlocked bootloader and root in order to flash anything
Oh ok but how do I root my phone I've tryed for so long
0. Unlock bootloader
1. Flash Twrp via pc (twrp is optional for rooting)
2. Get boot.img from base rom
3. Instal magisk on device
4. Modify the boot.img via magisk (this will create another patched image titled "magisk_patched-#####_#####.img"
5. Flash newly created magisk modified boot image ie. Titled "magisk_patched-#####_#####.img" via pc (this will temp. Root device)
6. On reboot open magisk, run the same newly flashed image ie. Titled "magisk_patched-#####_#####.img"through magisk via "direct install (recommended)" method. (this will fully root device and give root access to twrp)
7. Profit
Btw not responsible if you brick your device