Hi,
So long story short, I tried to get good phone for someone for a good price, I ordered a Xiaomi Mi 10 from China - But it came with a bunch of Chinese bloatware so I wanted to flash the Global ROM and have Google on there
I added it to my Xiaomi account, unlocked the bootloader (waited 168 hours), then followed instructions from a youtube video (
)
It worked well - I used adb to flash TWRP, and was able to install the Global ROM from xiaomi.eu using TWRP (version 12-11) (filename: xiaomi.eu_multi_MI10_V12.2.9.0.RJBCNXM_v12-11)
This worked well and everything went smooth, and I thought I was done, then I wanted to remove the device from my Xiaomi account, so I did remove the device from my account via Mi Cloud, and then I went to factory reset the phone, and then it just keeps booting into Fastboot.
I tried to hold buttons to boot into TWRP (volume UP and Power) but just goes into Fastboot, I tried to flash TWRP again via adb using "fastboot flash recovery twrp.img" but am getting this error when I run "fastboot boot twrp.img" - FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
Please let me know if there is anything I can do - even to get back to the chinese stock ROM
Thanks in advance
Hi all - I solved the problem by using the Global Fastboot ROM and MiFlash tool - I got a CRC error "update sparse crc list failed" but followed some advice to edit the "Flash.all" script and remove the 2 lines that contain "CRC"
Then the Flash process worked and the phone did boot into Global ROM
The xiaomieu stable version has a problem with custom recovery, so you grabbed fastboot.
if you want to use recovery, you need to boot recovery via ADB with the command fastboot boot recovery ....
Do not use on a stable version of xiaomieu recovery via the restart button to recovery
Actually, one can boot to recovery via restart button, but only after flashing the twrp 3.4.0 little turtle.
However, this recovery isn't able to decrypt the partitions, and could be used for flashing ROMs only from OTG drive.
The one that does decrypt and could be used in "normal" way is twrp 3.4.2.1206, but this one can only be booted as you said with fastboot boot recovery.img
Related
Hi everyone !
Some month ago I flashed on my device a beta test of Nougat for Honor 5c. Yesterday I wanted to leave it and go back to a stable rom but I was unable to find a flashable ZIP of stock Rom so I used FlashFire to flash a update.app firmware package (some **** from Huawei...).
After flashing it I tried to reboot my phone but I just got a Error Mode - Please update your system again. (and Recovery image error + load error)
To solve this I reboot to fastboot and on my computer I tried to flash TWRP with fastboot flash recovery twrp.img and I got a error : remote : command not allowed. I search and search and search on forums but I found nothing.
I tried some other fastboot commands, i tried to boot from a img, ... but nothing, just Command not allowed.
I have a Honor 5c NEM-L51, fastboot is "working" lol, no recovery, no force dload update, bootloader unlocked, FRP lock (idk what is this), i was rooted with Magisk and I flashed the package with FlashFire.
Please help me :crying:
Siffrein
Goal would be to get latest TWRP and LineageOS on it. It flashes twrp "fastboot flash recovery twrp.img:" ok but but not sure how to get it into recovery from there. When I go "fastboot reboot" it goes back to the OnePlus logo. Same when I try either VolUP + PWR or VolDWN + PWR. Also when I try flashing the zip of lineageos using "fastboot flash zip lineage.zip" I get the error "FAILED (remote: partition table doesn't exist)". Not really sure what to do next.
PS: Even just getting it back to stock would be good start. I tried flashing the stock rom but got the same partition error.
Update: I was able to get it working with help from here
The first link for the recovery tool is broken but down below there is a minimal version which works. It gave me bootloader capability, then I was able to adb sideload the stock rom. My OPX is alive again!
Hello everybody!
The last day my phone got stuck on bootloader screen. It just wouldn't boot the OS.
So I tried to fix that by flashing other rom. I have unlocked it trough MiUnlock.
Flashed in fastboot TWRP(rosy) recovery. It could boot TWRP but after a reboot, would launch MiRecovery.
After that the Android didnt start no more. After a new flash of TWRP I was able to enter recovery. I tried to flash a custom rom. After that the VOLUME UP + POWER wouldnt launch recovery no more (Also VOLUME DOWN+UP+POWER buttons, wont boot the Recovery)
Now i found an EDL mode to flash rom through XiaoMiFlash. Did it, Made the steps from tutorials. That, has changed the device to COM10 in MiFlash which let me try different official roms, and i always get the same error message: cannot receive hello packet, MiFlash is trying to reset status!
Also tried too flash a recovery img.
Tried everything i found on that, nothing worked to get those packets...
My only hope was to fastboot flash recovery TWRP or MiRecovery. And then flash new rom to fix my phone.
Tried many version of Twrp, but no success to actually flash.
I have tried removing recovery via adb and flashing another. Logs shows success but no effect on phone.
Still can't acces recovery mode on my phone.
Bootloop stuck. Shows MI logo and that its Unlocked.
Doesnt work flashing via fastboot - TWRP or MiRecovery images.
My phone is bricked for a week now. Please share a solution if you got one.
SOLVED
Good news. finally flashed chinese version through miflash tool.
had to rename some files from rom.
Flashed through BOOTLOADER.
Hello! This is my first thread on the forum;
I'm writing because I think I soft bricked my Xiaomi Mi Pad 4 LTE, let me explain from the very beginning.
It's a brand new device, bought today, and with a custom italian ROM which was sold with.
I just wanted to root it, and the bootloader was already unlocked because it was a custom ROM, so I tried to install TWRP (mocha version for Mi Pad) with Fastboot and then I wanted to install Magisk.
The issue is that, when I tried to flash TWRP to recovery with fastboot flash recovery twrp.img, it all went "OK" but then TWRP was not actually flashed and couldn't boot it with key combinations, it just looked like it wasn't there. I also tried to boot it without flashing, with fastboot boot twrp.img but it gave me
"Failed to load/authenticate boot image: 00000050" error
Looking on the web, I found someone who told to try fastboot flash boot twrp.img and so, without even thinking, I did it.
That's the main issue. I rebooted, and found that TWRP started, but now I couldn't boot my device anymore, because the default boot.img file was replaced by twrp.img. So, practically, TWRP replaced my device's default system (I think?).
Then, I tried to find a stock firmware for Mi Pad 4 (Clover) on the web, and I found it, so I flashed the stock firmware boot.img, fastboot flash boot boot.img, but when I rebooted, the device was stuck in the loading screen with three dots loading over a "Powered by Android" logo. I waited 20 minutes, nothing, it looks stuck, so this stock boot.img doesn't seem to work.
I can actually flash TWRP and that stock boot image both whenever I want and switch between them; the first works, the latter doesn't.
So, in poor words: I flashed twrp.img as boot.img and now I can't boot normally, but TWRP starts when turning on my device.
But I just want to get my default boot.img or system, or any other way to reaccess to my device. That's fine even if I have to hard reset or wipe everything, it's fine even if I am going to lose data, but please, just help me.
Can someone help me? I'm just a newbie in this world, please help me unbricking my device.
Thanks in advance.
Try installing twrp again and boot to it
Download custom rom.of your choice ( im using hovac and it been great for a year now )
Move it to your mipad via comouter
Format everything in twrp and install the rom and gapps
--- I just remembered havin same issue u having and if im not mistaking : u should reboot to recovery right after installing twrp ( you dont reboot to system )
Im not really sure about it cause it happened long time ago
@DanielVipx
Sorry, seems you tried that already. Did you try the mi flash tool?
This might help:
https://osdn.net/projects/xiaomifirmwareupdater/storage/Stable/V10/clover/
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Flash the boot.img of your current firmware version in twrp to both slots and flash twrp installer.zip afterwards then reboot. Now you will be able to boot as normal and have twrp installed also
Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download
Rajendran Rasa said:
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download
Click to expand...
Click to collapse
TWRP breaks down? ? Man!! Everyone using it.
All the youtubers.
There is a stable twrp for a3