Related
Hey, after rooting my phone and installing a few different custom roms, my USB connection has stopped working. whenever I connect the phone to a PC via USB, the device is unrecognised, and mass-storage doesn't work. It's definitely a hardware error, since trying a variety of different roms on a variety of computers, hasn't solved the problem, and even the recovery image doesn't allow mounting the SD card.
Research has suggested that it's affected other people in the past, with the only fix being to replace the motherboard. Hence, I'm looking for advice on un-rooting, rather than advice on fixing (but thank's for your good intentions!).
So I need to un-root my phone (and set it back to factory defaults), so that I can return it to T-mobile and have them fix it under warranty. Of course, because USB isn't working, I can't un-root the "traditional" way, by just installing the RUU update.
So I'm trying to figure out how to set the phone back to its original software, and I thought I'd ask for some advice before I make a mess of things...
As far as I know, there are 2 things that need to be done:
Flash the stock rom back on
- This bit is pretty straightforward; I just use the stock update.zip files found on the Modaco Forums (can't share a link here due to new account), and use the recovery image to update. The lack of a USB connection isn't a major issue for this bit, as I can transfer the zip files using the WebSharing Lite app (which allows me to upload to the phone over wi-fi)
Remove the Amon_Ra recovery image
- This is where I'm having issues. How do I go about clearing the recovery image, without a working USB connection? I'm not really sure how I put the recovery image on in the first place!
If someone could give me advice on how to remove the recovery image (or reset it to the stock one... I'm not sure if there was one initially), I'd really appreciate it. Also, please let me know if I'm missing out anything important.
Assuming everything works, later I'll write out a proper guide for anyone else who's ever in the same position.
Thanks in advance
Maybe this thread could help you?.... Read the last post on the 1st page, something about re-enabling USB.
Worth a shot?
EDIT,..... The link would help wouldn't it,.... Nandroid restore left other stuff around? (No ADB, No SD) [SOLVED]
thanks for your suggestion, but it didn't seem to work. apparently the issue has cropped up for other users, and the only long-term fix is to replace the motherboard under warranty, which is why I'm asking about un-rooting.
k28 said:
thanks for your suggestion, but it didn't seem to work. apparently the issue has cropped up for other users, and the only long-term fix is to replace the motherboard under warranty, which is why I'm asking about un-rooting.
Click to expand...
Click to collapse
You sure?... Have you started your phone in fastboot (hold vol- and power)? Try that to make sure if you haven't already. Once it comes up with the white screen and skateboarding androoids it'l say to press back or vol- (not sure which one so read it) to put into fastboot.
But if you have done that already,... Unfortunately I dont know how you can run an RUU .exe without USB.
yep, tried the whole fastboot thing, didn't work. I can connect to fastboot, but using the command "fastboot oem boot" , everything is normal - usb/sdcard are not disabled
(i didn't copy the exact output, and I don't have sdk on this laptop.. but yeh, that person's advice didn't match my situation).
hopefully someone else will have some ideas/comments?
k28 said:
yep, tried the whole fastboot thing, didn't work. I can connect to fastboot, but using the command "fastboot oem boot" , everything is normal - usb/sdcard are not disabled
(i didn't copy the exact output, and I don't have sdk on this laptop.. but yeh, that person's advice didn't match my situation).
hopefully someone else will have some ideas/comments?
Click to expand...
Click to collapse
What?.... It DOES connect in fastboot?... Says fastbootUSB (or something similar) on the screen?
I had same kind of problems with my usb. Try cleaning the "usb-hole"
lol, tried cleaning it but no luck.
from the research I've done, I've sorted out how to put the main ROM in place.
now I just need to find a copy of the recovery image of a T-mobile G2 Touch, and flash it using flashrec
can anyone help with that?
1. recovery - put regular hero recovery od sdcard and try to flash it using flashrec
2. root apk - delete it using root explorer
It is possible to enable USB debug from computer? I need to delete some file from the internal memory that causes the problem. I can't connect through adb at all.
I'm trying to fix my secondary phone (Garminfone) that that loads into desktop, but force close launcher and everything else. The only thing that I can do is connect to the computer for file sharing with the phone.
Thank you in advance.
I'm in a bit of a conundrum, myself...
I am attempting to do this, too, but for a totally different reason.
I am a VZW agent trying to extract contacts for a customer from a Moto. RAZR with a completely non-functional touch screen (no display, no function). Phone boots up fine, no sweat. Stock ROM, no backup :crying:, all of the typical means of transfer have been exhausted.
More or less, the only chance I have at succeeding is to either:
Enable USB debugging through some kind of shortcut or trick, or
Somehow, without USB debugging, figure out the user name for the customer's G-mail account (he has two, and cannot remember/doesn't use the one with all his contacts...)
Wouldn't be surprised if it's simply not possible.... but maybe somebody with a bit more knowledge can let us know! :good:
Edit: Hmm, not possible to run adb from the bootloader, but you can run Fastboot commands. None of those seem to be of use for these purposes though...
as mentioned by PhantasmRezound, It's not possible, However. adb is enabled in most recoveries. Also If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
or
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
There's always a way.
Thanks for the input...
I appreciate the feedback, but the way I read it... it's either not going to help in this situation, or it's too technical for a noob such as myself and I'm in over my head
If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
Click to expand...
Click to collapse
Customer's phone is completely stock. Hope I'm following along correctly, but I don't think this is possible without having something like ClockworkMod and pre-existing root access?
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
Click to expand...
Click to collapse
Never really tried this... but, I suspect, this won't work... not only does the touch screen not work, but the display is black.
I suppose it could be possible in combination with HDMI-out... but since the HDMI has never been set to "mirroring," I cannot simply plug it in and go (the best and only result I've gotten in this case is the red "M" logo on the screen...)
I would have given up on this hours ago, but it really bothers me when I can't figure out how to do something that appears to be so fundamental and simple...
Thanks for the inputs :good:
jad57pitt said:
Customer's phone is completely stock. Hope I'm following along correctly, but I don't think this is
possible without having something like ClockworkMod and pre-existing root access?
Click to expand...
Click to collapse
Well, I was thinking about this, and I think you can do adb in a stock recovery, should be able to create a backup image with the right software. It all gets a little hazy and wolly on techinical details, so I'm afraid I can't help anyone there.
jad57pitt said:
appreciate the feedback, but the way I read it... it's either not going to help in this situation, or it's too technical for a noob such as myself and I'm in over my head
Click to expand...
Click to collapse
And you're a noob , I fully understand that my casual, off the cuff, do a,b,c etc reply assumes a lot of technical knowledge, If it's not your phone man, don't stress it too much ..... Just hand it back to them look blankly into the middle distance while shaking your head.....use the following phrase " Nah man you've F*ed this up good, did you not sync it up with your google account at anytime "
Sorry man, I'm drunk, probably shouldn't be at this keyboard now
trevd said:
as mentioned by PhantasmRezound, It's not possible, However. adb is enabled in most recoveries. Also If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
or
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
There's always a way.
Click to expand...
Click to collapse
Unfortunately, Garminfone is a piece of garbage, lol. There's no custom recovery for it. There is nothing I can do now, I guess. I can't get into fastboot or anything because every time I try adb or fastboot it would not recognize the device.
wolftou said:
Unfortunately, Garminfone is a piece of garbage, lol. There's no custom recovery for it. There is nothing I can do now, I guess. I can't get into fastboot or anything because every time I try adb or fastboot it would not recognize the device.
Click to expand...
Click to collapse
If nothing else, you can do a Factory Reset. You'll lose all data but it will be running again.
Make sure the phone is charged up since this will take a while.
With the phone off, hold down left on the d-pad as you power it on. It will show "Wipe User Data" and then you can let go of the buttons. Just leave it for an hour or so, it will go about wiping and restoring system files from it's own recovery partition.
Also, random Garminfone blog with interesting entries to read while waiting on your phone lol. The person started to develop a port for CWM:
http://mygarminfone.blogspot.com/
PhantasmRezound, I've done tons of wipes but no luck and I'm familiar with the website you posted. Everytime I wipe, I get force process com.android.setupwizard stopped unexpectedly on the phone.
@wolftou
Ok.... A couple more tricks to try for your specific device and then I'm all out of ideas plus it's kinda getting away the original question/topic
1 Android Safe Mode:
Android does have a safemode, exactly the same idea as windows safemode, only needed apps are loaded. This might let you remove the troublesome app.
How to get into it on your device? I have no idea and from my limted research ( google as always ), it appears to vary by manufacturer and probably device. I have booted my tablet into it a couple of times by accident but never really stopped to figure out how, that's not important anyway Just I can confirm this mode exists ( In some androids at least ).
2 Flashing an alternative rom:
Have you tried flashing a different rom? I'm not sure of your model number so I don't whether this is relevant to you but have a look at this thread it looks like you can trigger an update using a sdcard swap trick....
I'm thinking about buying one myself now... just to see what's possible with them, fortunately ( for my wallet at least ) they are not available in the UK and I've got plenty of things to fill my Android addiction for now :laugh:
all answer not similliar the question
across tablet 8"
i have 8 inc across tablet,i cannot open my tab,,i think the operating not found,,how can i install it..because i cant open the system ,,unit help me pls...
actually i got canvas doodle 2 with no external sd support nd my usb debugging mode is off nd no backup is there in my phone...
but there is adb sideload...is there any way to enable usb debugging? and my phone is rooted and it is stucked at boot logo
Alternative usb debugging...
Hey my phone is stuck in an bootloop.....is there anyway to enable usb debugging even tho i cant get into the phone
My lenovo vibe s1 is showing black screen
I tried rooting my phone by the steps given by your site and now my phone is showing black screen. i tried pressing volume buttons and power button still it is not working. so when i am connecting my phone to computer it gets connected for 1 min and disconnects and again connects after 1 min. so is there any possible way that i can send my phone to USB debugging through computer.
I need use my samsung j2 mobile on pc bcoz my mobile display is not working.
usb debugging off
Keyah Cort said:
Hey my phone is stuck in an bootloop.....is there anyway to enable usb debugging even tho i cant get into the phone
Click to expand...
Click to collapse
mine too... how to enable usb debugging? please help...
trevd said:
as mentioned by PhantasmRezound, It's not possible, However. adb is enabled in most recoveries. Also If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
or
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
There's always a way.
Click to expand...
Click to collapse
Can you create a step-by-step tutorial? I have a LG Leon. Stock. Bluetooth/Wi-Fi disabled. My Google account won't accept. I've been trying to find ways to enable "Developer Options", "USB Debugging" just so I recover access. ADB and most of the programs I've used required USB Debugging, or wireless access.
Hello Everyone, I hope the you can help me with my request, How can I enable the USB debugging mode in android vers. 2.2.2 to 2.3.4
I really had a hard time since my Huawei Ideos s7-105 screen had been broken. I am not sure if the USB debugging was enabled. I have a really have a good reasons why I need to recover the files from my device.
Hoping for your kind response and help.
Monsterkid09
I'm sorry. I'm in doubt. I have a problem: Navon predator 10 tabs have dropped my gmail account. Adb debug off (or something you see 1-2 programs see something in adb mode but only in device info.If anything else i want always say do not connect. Very strong frp protection.What can I do?
i finally figured out how to get CWM installed and working, after a couple of months of fighting with it, off and on. so, i guessed that meant i have my bootloader unlocked - "wrong!".
i deleted some thing that wasn't supposed to be deleted, then the damned cell network and lan network stopped working (keeps saying com.android.phone has stopped). so i was going to put cyanogenmod on it, because i thought that i could, and just be done with the whole "missing apps" crap. it turns out "just because you CAN put CM on it doesn't mean you CAN put CM on it". i bricked it. i have NO options to "load" or "flash" or "boot" any thing when the phone is booting up. i would love some clarification as to what i CAN do from here.
i would rather install CM and be done with all of this, but i'll take any advice that gets rid of the problem. the biggest problem is understanding how to put CM on your phone, or to do any thing at all like that, when you cant get into any kind of recovery / boot menu, even though you ARE rooted... i don't care if i have to install cyanogenmod or some one else's CWM backup, i just don't know HOW to do it - especially with no windows (only linux). it's a rooted p769v20d (originally p769v10g).
thanks
sentientsystem said:
i AM rooted, but i have NO options to "load" or "flash" or "boot" any thing when the phone is booting up. i deleted some thing that wasn't supposed to be deleted, now the damned thing doesn't work (keeps saying com.android.phone has stopped), so i was going to put cyanogenmod on it, but not sure how. i keep seeing people mention CWM, and i installed that from google play, but i don't know what to do with it.
i was going to try some stuff mentioned in other threads, but i don't have access to a windows computer - and i don't think i need to root my phone again any way, considering it is still rooted.
i would love some clarification, and assistance, as to what i CAN do from here. i am rooted, i don't care if i have to install cyanogenmod or some one else's CWM backup, i just don't know HOW to do it - especially with no windows (only linux). it's a rooted p769v20d (originally p769v10g).
fwiw, regarding the mysterious deleted app:
i lose my internet signal as soon as it says "com.android.phone has stopped", then i get it back again right before it says that message again - it ALSO shows a cell-phone signal right before that message. this repeats over and over and over every few seconds - aggravating as hell...
here's the apps that i still have installed: http://forum.xda-developers.com/showthread.php?p=45774770
again, i would rather install CM and be done with all of this, but i'll take any advice that gets rid of the problem. the biggest problem is understanding how to put CM on your phone, or to do any thing at all like that, when you cant get into any kind of recovery / boot menu, even though you ARE rooted...
thanks
=== EDIT ===
i finally figured out how to get CWM installed and working, after a couple of months of fighting with it, off and on. so, now i guess that means i have my bootloader unlocked?
Click to expand...
Click to collapse
Nice thread title. That is how I am feeling right now with this phone. I feel like calling tech care and yell at them for a bit to vent. Anyway, why not install fastboot for Linux and flash the ics u and x? I uploaded my u and x folder in the Unlock Bootloader for Noobs thread. Then, flash the 20h.....oh, dang.... sorry. Forgot.... no Windows. Maybe do the built-in restore by holding the volume down, home and power keys?
Sent from my TBD753B using XDA Premium HD app
thanks, but i think i finally got it working. i never knew, after all this time, that after you do the l9recoveryinstaller, at the reboot, there are no cues to tell when when to hit some buttons, and it's not clear what buttons to hit. here's what i did, and, so far, its progress:
1: be rooted
2: install busy box, completely
3: install l9recoveryinstaller
4: reboot
5: after you see the LG logo, hold vol-down until you see the flashing lights (i thought you see the flashing lights and THEN you hit vol-down, but i was wrong).
still fighting to get a rooted rom installed ...
if i choose "install zip from external sdcard" is says:
"finding update ... opening update ... installing update ...installation aborted".
if i choose "restore" instead of "install" it will not let me select any thing, it just keeps saying file not found, when i try to select any further options, whether "restore" or "restore from external sdcard" or "advanced restore from external sdcard". and i already checked to make sure the sdcard was mounted...
sentientsystem said:
thanks, but i think i finally got it working. i never knew, after all this time, that after you do the l9recoveryinstaller, at the reboot, there are no cues to tell when when to hit some buttons, and it's not clear what buttons to hit. here's what i did, and, so far, its progress:
1: be rooted
2: install busy box, completely
3: install l9recoveryinstaller
4: reboot
5: after you see the LG logo, hold vol-down until you see the flashing lights (i thought you see the flashing lights and THEN you hit vol-down, but i was wrong).
still fighting to get a rooted rom installed ...
if i choose "install zip from external sdcard" is says:
"finding update ... opening update ... installing update ...installation aborted".
if i choose "restore" instead of "install" it will not let me select any thing, it just keeps saying file not found, when i try to select any further options, whether "restore" or "restore from external sdcard" or "advanced restore from external sdcard". and i already checked to make sure the sdcard was mounted...
Click to expand...
Click to collapse
I think your phone bootloader is locked, you cannot flash any custom rom zip file. It will soft brick your phone.
Please restore P769 CWM back from this thread http://forum.xda-developers.com/showthread.php?t=2136204. Download backup file and unbzip it. Put extract files in your sdcard /clockworkmod/backup/2013-08-30.12.00.00 folder. Extract file should contain several .img, .tar, .a, .log and .md5
artit said:
I think your phone bootloader is locked, you cannot flash any custom rom zip file. It will soft brick your phone.
Please restore P769 CWM back from this thread http://forum.xda-developers.com/showthread.php?t=2136204
Click to expand...
Click to collapse
too late - bricked it... currently looking for a way to unf*ck myself...
BTW, those were the ones i WAS trying to flash...
thanks
sentientsystem said:
too late - bricked it... currently looking for a way to unf*ck myself...
BTW, those were the ones i WAS trying to flash...
thanks
Click to expand...
Click to collapse
Then try to use LG mobile support tool to recover your phone. Load it from LG website, start your phone to S/W upload mode, connect usb then start program and select recover phone from menu.
artit said:
Then try to use LG mobile support tool to recover your phone. Load it from LG website, start your phone to S/W upload mode, connect usb then start program and select recover phone from menu.
Click to expand...
Click to collapse
i don't have a windows computer. looks like i'm out a 350$ phone. lesson learned. never will cease to be amazed that so many mobile hackers are using windows... seems like they would be linux users too... that would be awesome, because then there are likely to be linux tools to do this with... and i don't have a windows img to load into a virtual machine... lucky lucky lucky...
thanks any way...
sentientsystem said:
i don't have a windows computer. looks like i'm out a 350$ phone. lesson learned. never will cease to be amazed that so many mobile hackers are using windows... seems like they would be linux users too... that would be awesome, because then there are likely to be linux tools to do this with... and i don't have a windows img to load into a virtual machine... lucky lucky lucky...
thanks any way...
Click to expand...
Click to collapse
Well correct me if I am wrong, but I guess you "only" deleted some system files, right? Do you remember which ones were the ones? Or at least the folder they were in? Then you only need to extract that stuff from a kdz/ the bin file and push them on your phone using adb or maybe even the dd command.
Maybe if someone is kind enough, he ll probably provide you with the files you need. And cmiiw, but I guess you deleted stuff from /system/app...
Sent from my LG-P760 using xda app-developers app
sentientsystem said:
i don't have a windows computer. looks like i'm out a 350$ phone. lesson learned. never will cease to be amazed that so many mobile hackers are using windows... seems like they would be linux users too... that would be awesome, because then there are likely to be linux tools to do this with... and i don't have a windows img to load into a virtual machine... lucky lucky lucky...
thanks any way...
Click to expand...
Click to collapse
Lol, you are a Linux user, you should know how to get your hands on a windows.iso
However, i would recommend using a portable windows xp (bootable usb)
VR is not the best option IMO
You will need this program http://unetbootin.sourceforge.net/
&
Sorry I can't provide a link to the iso but do a google search for
portable windows xp bootable usb Osheraj
artit said:
Then try to use LG mobile support tool to recover your phone. Load it from LG website, start your phone to S/W upload mode, connect usb then start program and select recover phone from menu.
Click to expand...
Click to collapse
okay, what do i need to download to load onto the phone? kdz images, right? i'll check and see if i can find a kdz in the forum, and borrow a windows computer. i think i got it - this thread: http://forum.xda-developers.com/showthread.php?t=2107971
sentientsystem said:
okay, what do i need to download to load onto the phone? kdz images, right? i'll check and see if i can find a kdz in the forum, and borrow a windows computer.
Click to expand...
Click to collapse
It's depend on what method you use. You can flash kdz using offline method here http://forum.xda-developers.com/showthread.php?t=2085344
or use LG mobile support tools from LG website. If you choose this you don't need to download any kdz. It'll download kdz automatically from LG server then flash it on your phone. It take about an hour or two.
artit said:
It's depend on what method you use. You can flash kdz using offline method here http://forum.xda-developers.com/showthread.php?t=2085344
or use LG mobile support tools from LG website. If you choose this you don't need to download any kdz. It'll download kdz automatically from LG server then flash it on your phone. It take about an hour or two.
Click to expand...
Click to collapse
thats awesome - i wonder if i can get by with using that on wine on linux, instead of borrowing a windows computer... i'm gonna try it...
well, the verdict is in, on this one: i'm screwed. i've tried and tried and tried and tried and tried and tried and tried and tried and tried and tried and tried and tried, and i can NOT flash this damned phone. it's BRICKED.
i borrowed / hijacked my brother's computer (windows7), all day. i tried a few different things - i even tried the same way i flashed it to update it ( http://forum.xda-developers.com/showthread.php?t=2356536 ), which was worthless to unbrick it.
the problem in every case was that every time the damned flasher got so far along it would "lose the connection to the phone". drivers installed, etc, etc, no difference. i suspect its because i couldnt connect it in all the various modes (mtp ptp etc), since the ONLY way it would connect is in "software upgrade mode".
i had to buy another phone, won't have it till tuesday. lesson learned: NEVER buy a phone that didn't come from samsung... you just can't do what you want with them, without a lot of time, patience, experience, and a windows computer.
thanks for all the help.
sentientsystem said:
well, the verdict is in, on this one: i'm screwed. i've tried and tried and tried and tried and tried and tried and tried and tried and tried and tried and tried and tried, and i can NOT flash this damned phone. it's BRICKED.
i borrowed / hijacked my brother's computer (windows7), all day. i tried a few different things - i even tried the same way i flashed it to update it ( http://forum.xda-developers.com/showthread.php?t=2356536 ), which was worthless to unbrick it.
the problem in every case was that every time the damned flasher got so far along it would "lose the connection to the phone". drivers installed, etc, etc, no difference. i suspect its because i couldnt connect it in all the various modes (mtp ptp etc), since the ONLY way it would connect is in "software upgrade mode".
i had to buy another phone, won't have it till tuesday. lesson learned: NEVER buy a phone that didn't come from samsung... you just can't do what you want with them, without a lot of time, patience, experience, and a windows computer.
thanks for all the help.
Click to expand...
Click to collapse
Did you try to recover your phone with LG mobile support tool. It can reinstall rom in almost any soft-brick case. Please try it if you haven't try it yet. Many people restore their phone by that software. The steps are
- Download LG mobile support tool from LG web site
- Boot you phone to S/W update mode
- Run Tool and select recover phone
- Wait about 1-2 hours to download and flash
If it's not hardware problem, this should solve your problem
artit said:
Did you try to recover your phone with LG mobile support tool.
Click to expand...
Click to collapse
i never found that on their website, and i looked quite a few times. however, i noticed when i used the b2clientsetup.exe that if i run it without running the shttp server first, that it downloads a support tool from the net, which does not work - keeps saying phone lost connection. not sure if its the same tool.
sentientsystem said:
i never found that on their website, and i looked quite a few times. however, i noticed when i used the b2clientsetup.exe that if i run it without running the shttp server first, that it downloads a support tool from the net, which does not work - keeps saying phone lost connection. not sure if its the same tool.
Click to expand...
Click to collapse
Yes that tool. In my region, it has download link but for P769 it has request repair service.
Download from http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
You must remove following lines from hosts file
127.0.0.1 csmg.lgmobile.com
127.0.0.1 csmgdl.lgmobile.com
Then run it
artit said:
Yes that tool. You must remove lines from hosts file. Then run it
Click to expand...
Click to collapse
yeah, that's exactly what i did, but it would keep "losing the connection to the phone". not sure why, but i suspect it was a driver issue - and i installed the latest drivers, which made no difference. i also went back and installed older drivers, which made no difference. i must just be lucky as hell, or some thing .
sentientsystem said:
yeah, that's exactly what i did, but it would keep "losing the connection to the phone". not sure why, but i suspect it was a driver issue - and i installed the latest drivers, which made no difference. i also went back and installed older drivers, which made no difference. i must just be lucky as hell, or some thing .
Click to expand...
Click to collapse
Try to use others USB ports, if that also doesn't work maybe you have to try on other computer.
artit said:
Try to use others USB ports, if that also doesn't work maybe you have to try on other computer.
Click to expand...
Click to collapse
yeah, i tried switching between the usb 3.0 ports and usb 2.0 ports, but it made no difference. i have no access to any other computers, so, that's why i ended up ordering another phone. i'll never buy another phone that is not a samsung...
thanks
In my country (RO) there are some GSM Repair Centers. You should not give up and you should go to them. Par example, I flashed an HTC Mozart when the battery was dead and I bricked it (idiot, I know). I went to a shop like the ones mentioned above and I think he said that he has to flash the phone using a JTAG or something like that (I know that he has to open the phone to reach it's motherboard, solder some **** out there and... flash I guess). The whole thing was about ~20E. Anyway, keep digging, maybe you'll eventually find something that works for you. If not, go to someone who can "force flash" it and maybe you can save the device.
First off,i would like to apologize for being such an amateur.This is my first post on this forum,so don't get angry on me for breaking some rules (forgive me im new ,idk if i should post this here or somewhere else,don't worry i will be polite ).Anyway as the title says,im having a bit of a problem,or to be more precise a huge one.
So lately i was trying to root my phone,Huawei U8500 which was so buggy,so i decided to root it,install cwm and flash a new ROM.But the problem is i can't get it rooted.I've tried many methods from XDA but none of them worked.Z4 root loads until it displayed acquiring root access,and then the app crashes (closes itself).I've tried Framaroot,but it didn't work either.It said 'try another exploit',but the thing is it displayed me only one.I also tried poot.apk,but it also failed.Telling me '(-) can't get a handle on it:-1 Permission denied'.
(note that all the time my USB Debugging was enabled ! ) All of the apps are at latest version!
So after so many failed attempts with pc-less methods i've decided to try a PC one.The first method i used was Superoneclick,which didn't work.I thought that was because the phones model was not supported.All until a friend of mine told me that he rooted his phone using the same program (he has as well huawei u8500).Every time i try to root with superoneclick it is stuck at the second step(as in screenshot).Then i started googleing and google-ing,until i found a thread with a program called SRSroot,thinking it will safe me from this nightmare that is haunting me for days.But it failed again.The program told me 'ADB Device not found',which made me think about checking the drivers.I've installed the google usb drivers and SDK Manager with all drivers.But still the same happens.So i decided to see if my computer(later many others) recognize my device.After i typed in ADB 'adb devices' it showed me blank.Later i tried to do the same with my other phone and it displayed the device.Another thing i've noticed lately is my computer sees my device as a cd device in windows device manager.It happened with all computers i tried. I've tried it also at my friends(plural,which means more computers).I've tried it on Win7,win XP,and WIN8 and it is still displayed as cd drive.(which is not the case with other phones i've tested!)
I hope someone will read this and help me.I would also like to add, this is not my first time rooting,so i knew what i was doing.
Im so confused,idk what to do,developers pls HELP ME!!!
I will also post screenshots from all the things mentioned above.Hope this helps you figure out the problem
On the adb devices, are you sure it is setup correct, because it needs a set of rules basically. I don't have time right now. But if you search 'adb' in the xda portal (not forum) you will find a windows universal adb installer. That should fix the adb issue. But apart from that I don't know what else you can do.
Sent from my ST18i
tried
Guynan said:
On the adb devices, are you sure it is setup correct, because it needs a set of rules basically. I don't have time right now. But if you search 'adb' in the xda portal (not forum) you will find a windows universal adb installer. That should fix the adb issue. But apart from that I don't know what else you can do.
Sent from my ST18i
Click to expand...
Click to collapse
I did what you said,but the problem is the same.The rest of my phones get recognized as androids,but only this unique Huawei is recongized as CD-Drive,pls anyone help?
Here i took a screenshot after trying to update "cd drive''
Beatit123456 said:
I did what you said,but the problem is the same.The rest of my phones get recognized as androids,but only this unique Huawei is recongized as CD-Drive,pls anyone help?
Here i took a screenshot after trying to update "cd drive''
Click to expand...
Click to collapse
Gosh that is so confusing. Could you reset your phone or do you have data you want to keep? Because you could perform an ADB backup and try a factory reset and hope that all is righted.
I did factory reset,i also did hard reset,but still nothing works
Guynan said:
Gosh that is so confusing. Could you reset your phone or do you have data you want to keep? Because you could perform an ADB backup and try a factory reset and hope that all is righted.
Click to expand...
Click to collapse
Already did it,still the problem persists.Anyone here have any idea?
Beatit123456 said:
Already did it,still the problem persists.Anyone here have any idea?
Click to expand...
Click to collapse
Short of a new phone, I got nothing. Unless you could get into a recovery, try format the system, causing a brick, flash a 2.3 ftf and then a 4.04 after that, clearing data each time.
pls read my question thoroughly
Guynan said:
Short of a new phone, I got nothing. Unless you could get into a recovery, try format the system, causing a brick, flash a 2.3 ftf and then a 4.04 after that, clearing data each time.
Click to expand...
Click to collapse
Since im unable to root my phone,i can't flash a custom ROM.I'm trying to root but no success,pls some1 help????
Hey everyone, i'm sorry if this isn't the right section to post that kind of stuff in, i have a galaxy s7 edge with a broken screen, it's unresponsive and it shows nothing, so it's pointless for me to plug a mouse via an OTG cable in order to operate it, other than the screen, i think it still functions though, it's relatively expensive to repair here in my country so i figured i might as well recover my data and get rid of it altogether afterwards, i don't have usb debugging enabled, and i don't how how to enable it via recovery mode (if it's possible that is), is there some way to like cast its display to a computer and use the latter the interact with it ? or at least access its storage ? i really have important data in the device, so if there's no way to recover it, i'll be forced to repair the screen, i really appreciate any help
Have you asked this already - like a year ago?
https://forum.xda-developers.com/t/samsung-galaxy-s7-edge-cracked-screen.3995855
So, no TWRP. Then flash a modified stock recovery of your own. Enable adb in it. Pull stuff if not encrypted. If not, root with SuperSu. Then pull stuff...
That was just guesswork. Try yourself what can be done...
CXZa said:
Have you asked this already - like a year ago?
https://forum.xda-developers.com/t/samsung-galaxy-s7-edge-cracked-screen.3995855
So, no TWRP. Then flash a modified stock recovery of your own. Enable adb in it. Pull stuff if not encrypted. If not, root with SuperSu. Then pull stuff...
That was just guesswork. Try yourself what can be done...
Click to expand...
Click to collapse
Yes i did, i completely forgot about it however ! anyway, there's no custom recovery (i figured it's pretty much a must just in case something like that happens, but it was too late unfortunately), i didn't search thoroughly yet, but i can't find already modified stock recovery files for the device (assuming there's any of course), and i don't know how to modify such files if that's possible, can you walk me though some steps ? although i thought i knew a little bit about that stuff, apparently it's not enough ! and thanks a lot, i really appreciate your help
Sisine said:
although i thought i knew a little bit about that stuff, apparently it's not enough
Click to expand...
Click to collapse
Same here. And that guesswork went wrong too as I forgot that you said in that other thread that usb debugging isn't enabled...
CXZa said:
Same here. And that guesswork went wrong too as I forgot that you said in that other thread that usb debugging isn't enabled...
Click to expand...
Click to collapse
It looks like i'm out of luck