Hi! I have been switching roms weekly to see what rom would be great fit for me.
I was from the device of whyred and certainly curtana is a very different system to mess around with.
Going back to the concern, I cannot flash anything else with any recovery except the original ROM of the device (my device is curtana) and here is what I did so far:
1. Tried format data, restart recovery and then format cache, dalvik, internal - doesn't work
2. Tried changing recovery: LOS, TWRP official, OrangeFox (what I am currently using)
3. Tried changing format partitions (exfat, f2fs, ext4)
I can't do the last resort which is to stay with MIUI because I can't deal with MIUI any longer due to the MIUI apps. (I am heavily reliant to AOSP).
Can anyone help me with this?
First You have to install TWRP recovery and vbmeta with command prompt from fastboot mode, then after installing TWRP, install the Orange fox recovery, enter the new password or pin and format the internal storage, then try two install any rom
If you want any links for files pm me https://t.me/HemanthAryan
Related
I re-unlocked my device a few days ago after a long time of using MIUI. Unfortunately, I am now facing a peculiar problem I had not faced the previous time I unlocked my device.
I cannot seem to replace MIUI stock recovery with official TWRP.
If I use fastboot flash recovery xxx.img, the terminal does confirm that the action was successful. Yet, when I reboot into recovery, I am greeted by Mi-Recovery 3.0 instead of TWRP.
My initial thought was that maybe there was some restriction in MIUI that prevented the stock recovery from being replaced, so I flashed RR 5.8.5-FINAL. I still cannot flash TWRP.
Some other info:
The MIUI build I was on: MIUI 9 7.9.21 Global Beta
My phone: RN3 SD 2GB/16GB variant, Fpc fingerprint sensor
The temporary workaround I used to flash RR was directly booting into TWRP using fastbooot boot xxx.img
NOTE: I did a standard wipe (factory reset, followed by wiping System, Data and Cache) when I flashed RR.
As you might imagine, using fastboot to boot into TWRP every time I want to flash something is quite tiring and so if anyone can help me to permanently flash TWRP, I'd be really grateful. Thanks in advance.
PS: If this question has already been answered, then please guide me to the relevant thread and I will take down this one.
This problem also happened to my friend's Redmi Note 3 MTK. I don't know if it's going to work on KENZO or not.
The solution is to flash the TWRP recovery image through fastboot ==> Turn off the device by holding down the power button (DISCONNECT PHONE FROM PC) ==> Boot the recovery using button combinations
This should let you boot into TWRP and stays permanent after the first session
Flashing Through Fastboot/EDL Mode
Flashing Twrp through Fastboot is the permanent way of flashing the recovery...The method is very simple and can be done even on locked bootloader but the thing in locked bootloader is that once you have flashed the TWRP the internal storage is inaccessible because the data is encrypted so you need to wipe->format data ...then press "yes" ..by typing yes the internal storage will be formatted completely so make sure you have a backup ...and do copy the ROM file in SD card for flashing ...after wiping process press install then select SD card and flash the ROM and gapps and enjoy the TWRP...
Refer this link for flashing process youtu.be/rCONN1_IPuU(please add https:// before the link)
Hope this solves your problem...
same problem !! did you find any solution !!!
[UPDATE]
Hey,
Just to say, I managed to fix the biggest mess up in technology ive done in a long while (thank God). So everything seems to be working fine now.
Thanks
-Rory
Hey,
I recently flashed the Pixel Experience Rom, which automatically activated the "pin at boot" function of Android. That was fine until I tried to root my phone, so booting into TWRP I was greeted with a decrypt screen. I typed in my PIN and it failed. I have reboot my device into TWRP about 6 times now from TWRP as this is a known bug to no avail. Then, panicking, I went on boot loader and ran "fastboot wipe **" (The ** being system, boot, recovery, userdata etc etc). By doing this I stupidly deleted my NAND backup. I then reflashed TWRP. TWRP still needed to be decrypted.
I then used "adb push" to transfer the zip file of the ROM to my phone while in TWRP, I then tried flashing it from TWRP but it returned error code 7 and couldnt mount /system /sdcard etc etc as it had been encrypted.
Right now I am trying to flash the stock firmware from fastboot. I have flashed "system.img" and "boot.img." Yet there is no userdata file.
I have rebooted my phone but it takes me straight to recovery, which is still encrypted.
Any help will be massively appreciated.
Thanks
-Rory
Heyyo, just a heads up format data does a reformat on user data partition and disables encryption.
But I believe I have the proper solution to TWRP in my test thread under BETA downloads as Indian EUI ROM has forced encryption where as Chinese ROMs seem to have none which is why switching from Indian EUI ROM to custom ROMs gives decryption errors.
https://forum.xda-developers.com/le-max-2/development/test-twrp-3-2-1-0-leeco-le-max-2-t3734209
*Urgent* Need clarifications regarding the flashing of TWRP recovery & custom ROMs
I want to flash a custom ROM (Pixel Experience Plus) on my Poco/Pocophone F1.
It would be of great help if I get clarifications regarding the following:
1. After unlocking the bootloader, is it necessary to flash TWRP recovery using 'fastboot flash recovery' cmd command, to flash a custom ROM? Or can TWRP recovery just be booted by using the 'fastboot boot' cmd command & then flash the ROM? (This is because I'd prefer to flash a custom ROM without permanently flashing TWRP recovery, I want TWRP temporarily)
2. In case if it's necessary to flash TWRP using 'fastboot flash recovery' cmd command, then do I have to flash DFE (Disable Force Encryption). Can I skip flashing DFE? (Because I don't want to flash DFE & want TWRP temporarily)
3. I want a clean install of the custom ROM. So, can I wipe Dalvilk/ART cache, Data, System, Cache, Internal Storage, SDCard? i.e. everything except, USBOTG (Because, the custom ROM & firmware ZIP files are stored in it & I'll flash them from USB OTG device).
Would this type of wiping affect the TWRP recovery?
4. After wiping everything except USBOTG, can the custom ROM & firmware ZIP files be transferred into the phone's internal storage by connecting it to the PC, while in TWRP recovery?
5. Is it safe to flash the ZIP files from a USB OTG device?
6. As I already mentioned that I want TWRP temporarily (If it's possible). After flashing the firmware & custom ROM. If the recovery is still a stock Mi recovery. Would it affect the functioning of the custom ROM in any way?
If all of the above can be done, is this one of the proper way to flash/boot TWRP recovery & flash a custom ROM? If not, please guide me accordingly.
imegsp said:
I want to flash a custom ROM (Pixel Experience Plus) on my Poco/Pocophone F1.
It would be of great help if I get clarifications regarding the following:.
Click to expand...
Click to collapse
i'm no expert and i'm fairly new to flashing if you're kind enough to read it here's my 2cents.
1) I believe it is necessary to flash with that command & have TWRP as your custom recovery , it is packed with powerful tools. so i don't see a problem not wanting it permanently and it saves you the hassle of flashing it again when changing roms , fixes,etc..
2) Yes , you need to flash the DFE so you won't encounter any errors in TWRP later.
3) " Dalvilk/ART cache, Data, System, Cache " this should be okay , no need to flash everything. for best practices do a factory wipe in TWRP and in advanced mode wipe those 4. make sure to create a backup in-case something goes wrong.
4) I haven't tried this yet , but it seems not doable as you need permission in the phone for the default USB connection toggle if it's in data transfer mode , usb debuggin , charging etc. best is boot your phone then do the transfer in file manager.
5) Yes it is safe since OTG is another form of External Data devices such as SD Card , etc.
6) No it wouldn't affect the rom functionality since rom and recovery is two different thing.. but still , to avoide future mishaps stick with TWRP
you can check this helpful link by madsponge26 : https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
imegsp said:
I want to flash a custom ROM (Pixel Experience Plus) on my Poco/Pocophone F1.
It would be of great help if I get clarifications regarding the following:
1. After unlocking the bootloader, is it necessary to flash TWRP recovery using 'fastboot flash recovery' cmd command, to flash a custom ROM? Or can TWRP recovery just be booted by using the 'fastboot boot' cmd command & then flash the ROM? (This is because I'd prefer to flash a custom ROM without permanently flashing TWRP recovery, I want TWRP temporarily)
2. In case if it's necessary to flash TWRP using 'fastboot flash recovery' cmd command, then do I have to flash DFE (Disable Force Encryption). Can I skip flashing DFE? (Because I don't want to flash DFE & want TWRP temporarily)
3. I want a clean install of the custom ROM. So, can I wipe Dalvilk/ART cache, Data, System, Cache, Internal Storage, SDCard? i.e. everything except, USBOTG (Because, the custom ROM & firmware ZIP files are stored in it & I'll flash them from USB OTG device).
Would this type of wiping affect the TWRP recovery?
4. After wiping everything except USBOTG, can the custom ROM & firmware ZIP files be transferred into the phone's internal storage by connecting it to the PC, while in TWRP recovery?
5. Is it safe to flash the ZIP files from a USB OTG device?
6. As I already mentioned that I want TWRP temporarily (If it's possible). After flashing the firmware & custom ROM. If the recovery is still a stock Mi recovery. Would it affect the functioning of the custom ROM in any way?
If all of the above can be done, is this one of the proper way to flash/boot TWRP recovery & flash a custom ROM? If not, please guide me accordingly.
Click to expand...
Click to collapse
1. if you always want to depend on PC to trigger your Poco in to recovery then use command "fastboot boot recovery.img", otherwise lets say you are on the move and got pixel update! you can simply download it , and flash it in 15 mins on the go , so mainly its upto you . from security point of view, yes its not good to have twrp flashedi n your /recovery , anyone can boot and do harm! , so its a judgement call for you...
2. again upto you, DFE wont interfere/confilt with either rom or twrp
3. android device have various paritition wiping "/system" & "/data" (user setting and apps & appdata) is ENOUGH and called CLEAN FLASHING in various threads of custom roms. you don't have to wipe internal storage!!! you will lose you data... BUT YES if you get encryption error then you must click "FORMAT DATA" button on twrp in order to make storage usable/accessable to twrp. this FORMAT DATA will format your /data /system and /internalStorage partitions and you will delete all your data! then you can flash custom rom of your choice from scratch
4. you don't get access of TWRP FILEMANAGER via fastboot commands from pc, BUT you can do similar by enableing TWRP SIDELOAD option under settings, this adb sideload is a mode listening for new incoming file to flash! if you side load pixelrom.zip from fastboot command while your twrp has active sideload waiting, fastboot will start sending the file and twrp will wait and as soon as the transmit is completed! the file will automatically be flashed!. ,
however you can put files in usbotg drive or combo drive and using file manager in twrp move files from HERE to THERE!
5. I always do it!, but make sure the connection is not faulty!!! otherwise high chances of incomplete flashing and I lost my redmi3i due to impcomplete flashing of stable rom! (bricked)
6. no it wont affect! infact you can even keep the /recovery partition blank! ( fastboot erase recovery).
for MIUI FLASHING/ROOTING / Disabling force encryption etc , this post is king
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
I am on HAVOC2.8 and this is how i did it
1. flashed TWRP 3.3.1 unofficial (download it from HERE ) ref Reference - as official twrp has TOUCH driver issues. this one worked with me very well
2. I wiped /data, /system then
3. flashed VENDOR.zip from HERE
4. FLASHED CUSTOM ROM (i use HAVOC2.8)
5. FLASHED DFE HERE - REFERENCE
6. FLASHED GOOGLE APPS ( GAPPS.ORG) ( ARM64>9.0MicroPackage)
7. Flash Optimus Drunk Kernel ( OPTIONAL- havoc uses shadow kernel , i feel OD kernel is better, battery and 4g connectivity)
8. FLASHING MAGISK19.3
9. when i was on havoc2.7, by using MIGRATE, it made flashable zip of my APPS+DATA, stored in internalStorage, and now I will FLASH that file., Mine size goes to 2gb you can get it from HERE
10. WIPE CACHE/DELVIK
11. REBOOT
fire reboot may go in to bootloop and then second reboot may take a while and finally you should see Pixel Setup asking google accounts and info etc
once after you finish setup! don't RESTORE APPS from PLAYSTORE, (download only license apk, in my case I have purchases many apps from playstore and saperate license info is always appear in intial setup! SELECT THOSE ONLY)
ONCE playstore is DONE downloading all your selected (fewer) apps, and MAGISK ROOT is working...... put device on AIRPLANE MODE
FROM DROP DOWN Notification panel, CLICK MIGRATE, and it will prompt you what do you wana restore from your previouce ROM to newly flashed HAVOC ..APPS+SETTINGS+PERMISSION+DATA etc - migrate restoration may take upto 30 mins,
once done, uninstall from system and reboot device!
REMEMBER I DONOT RECOMEND MIGRATE TRICK FOR WHATSAPP, it doesn't work properly and NOTIFICATION ISSUES with BLANK DP observed by me whenever I forcely re-instated whatsapp by migrate!
Hi. I installed Android 12 Pixel Experience rom and my TWRP gone after this. After installing the rom, TWRP replaced with Pixel Experience's own recovery mode. Currently, the ROM is installed and I can use it without any problems, but I cannot switch to a different ROM in any way. When I install TWRP with ADB, I cannot install the file named "DM Verity & ForceEncrypt disabler" because everything is encrypted. I do not use any passwords on the ROM (fingerprint, screen lock, etc.). I want to install new ROM so I need to make TWRP permanent and remove encryption on TWRP, because i can't see my files. As I said, the phone is can open and I can use it without problems. Looking forward to your help, thank you.
1) Backup everything
2) Install twrp and sideload the PE rom but don't boot into it
3) Flash the DFE (disable force encryption ) zip from twrp
4) Boot into the rom
Remember you won't get the ota updates if you disable the encryption and have to manually update the rom
easdasd617 said:
Hi. I installed Android 12 Pixel Experience rom and my TWRP gone after this. After installing the rom, TWRP replaced with Pixel Experience's own recovery mode. Currently, the ROM is installed and I can use it without any problems, but I cannot switch to a different ROM in any way. When I install TWRP with ADB, I cannot install the file named "DM Verity & ForceEncrypt disabler" because everything is encrypted. I do not use any passwords on the ROM (fingerprint, screen lock, etc.). I want to install new ROM so I need to make TWRP permanent and remove encryption on TWRP, because i can't see my files. As I said, the phone is can open and I can use it without problems. Looking forward to your help, thank you.
Click to expand...
Click to collapse
You need to read the instructions before you flash anything. PE A12 is encrypted by default and because TWRP can't handle the decryption of A12 ROMs, PE replacing the TWRP with PE Recovery, so to be able to get OTA updates. This is a workaround until TWRP fix the decryption issue.
To flash another ROM, take backup of the files you want from your Internal Storage, flash TWRP via ADB, wipe everything and format data. Then connect your device to PC and transfer the ROM and the files you want to flash into your Internal Storage and proceed with flashing.
when i tried to flash any custom roms in my phone *redmi 10 (selene)* i encountered many problems like (twrp for miui 13 "downgraded to miui 12" - the bootlooping after flashing, failed to mount systemroot/vendor/product "need to format (not wipe) data before flashing) but i finally managed to solve those problems and now i can flash custom roms by formating (not wiping) data and changing /data file format to ext4 and flashing the rom
but now the problem here is that im stuck in custom rom boot screen (tried nausantara 4.4 and 4.5 and project lighthouse sailboat and all of them are official and i was planning to try cherishos but pling.com was down)
so is there any fix for that? (also no i think twrp isn't official as theres no official page for selene, no phone starts bootlooping after formating data after installing rom, tried using ofox but it was useless, and adb sideload doesn't work)
and also i tried to format data bso many times but it only sucseeded once and the phone started bootlooping after reboot
and i can flash stock miui without any problem (fastboot, edl, recovery "twrp i didn't try ofox yet")
thx in advance
also every time i reboot to recovery from fastboot (i have to install recovery img into boot partition from fastboot because i don't have a recovery partition) i see this error in twrp console
e:unable to decrypt fbe device
7m2h said:
Forget you have not the Snapdragon version
Click to expand...
Click to collapse
i don't get it
can you explain please?
thx in advance
Did you flash vbmeta disabled and No verity opt encrypt 6.1 zip like instructions said?
why ext4 format userdata back to f2fs