[UNOFFICIAL] LineageOS R Mod //LiR - Treble-Enabled Device Development A/AB ROMS

L i R
< Your warranty is now void! >
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you​
LiR is a project which based on LineageOS 18.1 with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. System can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data
UPDATE VERSION
latest build: 2022.03.25
treble patches: v316
SPL: 5 Mar 2022
FEATURES/CHANGES
see Project page changelog
DOWNLOAD (CL1CK HERE)
vanilla, gapps, go-gapps: all possible architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N, S or Z
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included
-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)
so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on LineageOS GSI by Andy Yan (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson, @AndyYan
projects: TrebleGSI • LineageOS • BlissROMs • crDroid • PixelExperience • ION • neon-OS • Havoc-OS • Evolution-X • LiquidRemix • ExtendedUI • ABC Rom • GrapheneOS • SyberiaOS • ProtonAOSP

---

reserved

---

re-reserved

---

Great Job thanks for this
testing in this night...
hacker
---------------------
naming img files
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included

---

As always @eremitein you provide us with the best of the best! Thank you.
We should all start calling @phhusson Gsi as "stock GSI" his work is phenomenal 5 thank you.
The list of improvements is huge! I'm switching to it ASAP (currently on tight mobile plan, waiting for wifi)

---

Does this change the model like phh-treble? When I installed his GSI, it changed the model to "Phh-Treble with GApps" and many apps/games didn't show in the store.

---

SimonFoxcoon said:
Does this change the model like phh-treble? When I installed his GSI, it changed the model to "Phh-Treble with GApps" and many apps/games didn't show in the store.
Click to expand...
Click to collapse
in all my GSIs always used natural model name
also you can enable SafetyNet helper in Phh settings before login to the Play Store

---

eremitein said:
in all my GSIs always used natural model name
also you can enable SafetyNet helper in Phh settings before login to the Play Store
Click to expand...
Click to collapse
I don't see Phh-Treble settings after installing arm64-bgZ, does this not have them? also no superuser app
EDIT: nvm it showed up, still no superuser app though
EDIT 2: forgive me i realize that superuser is a toggle

---

SimonFoxcoon said:
I don't see Phh-Treble settings after installing arm64-bgZ, does this not have them? also no superuser app
EDIT: nvm it showed up, still no superuser app though
EDIT 2: forgive me i realize that superuser is a toggle
Click to expand...
Click to collapse
please, read the changelogs)
(Phh Settings will show after second time open android settings)

---

I installed version lir-v300m-210221-arm64-agZ.img on mate10lite, flashing went smoothly and booted at once.
deep sleep not working and Google Play Store also freezing not letting to signup.

---

I flashed also version lir-v300m-210221-arm64-agZ.img on a Gome fenmmy note c7 plus. Works fine . Only cant get safetynet working. No matter i log out and log in google play with dinamic safety net ticked and no superuser.
Not much diference between CAOS and LineageOs. Only there si no recovery option in menu when you switch off.
Thanks. Good GSI rom though.

---

Gomeman said:
I flashed also version lir-v300m-210221-arm64-agZ.img on a Gome fenmmy note c7 plus. Works fine . Only cant get safetynet working. No matter i log out and log in google play with dinamic safety net ticked and no superuser.
Not much diference between CAOS and LineageOs. Only there si no recovery option in menu when you switch off.
Thanks. Good GSI rom though.
Click to expand...
Click to collapse
recovery option need to turn on in the Gestures settings

---

eremitein said:
recovery option need to turn on in the Gestures settings
Click to expand...
Click to collapse
I mean by default. My mistake. You are right

---

I was on CAOS, then LineageOs 18 then switched to LIR which is the best gsi yet!
One small issue i had: autobrightness overlay was not working. The apk doesn't contain the arrays/bools xmls, had to add them. On reboot, autobrighness button appears in quick settings as well as a toggle in display settings, but not doing anything. Adaptive brightness is working in my base rom, so it should be working, right?
As always, awesome job on the gsi, and switching to SimpleGallery was a good idea. Thanks

---

IamTheBRAVE said:
autobrightness overlay was not working. The apk doesn't contain the arrays/bools xmls, had to add them. On reboot, autobrighness button appears in quick settings as well as a toggle in display settings, but not doing anything. Adaptive brightness is working in my base rom, so it should be working, right?
Click to expand...
Click to collapse
well, are you tried "Enable AutoBrightness overlay" option in Phh settings > Misc?

---

eremitein said:
well, are you tried "Enable AutoBrightness overlay" option in Phh settings > Misc?
Click to expand...
Click to collapse
Yes, it's on. Button is there but no adjustments to brightness.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

---

IamTheBRAVE said:
Yes, it's on. Button is there but no adjustments to brightness.
View attachment 5234873
Click to expand...
Click to collapse
so, maybe missed values for autobrightness. they is should be in treble device overlay

---

eremitein said:
so, maybe missed values for autobrightness. they is should be in treble device overlay
Click to expand...
Click to collapse
I used values from A30 overlay. Here are the files.

---

@eremitein the bubbles is not working correctly