Related
Android "P" is the upcoming ninth major version of the Android operating system. It was first announced by Google on March 7, 2018, and the first developer preview was released on the same day. The second developer preview is expected to be released at the next Google I/O developer conference.
Requirements :
Qcom fully treblized device with 8.1 vendor
Global Bugs :
VoLTE
Device specific Bugs :
Mi5 = Reboot Loop into TWRP (Fixed by restore files)
ANDROID P DP3
installation :
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP3-sGSI.img HERE
- Flash POST-sGSI_1_v0.9.zip HERE
- Flash POST-sGSI_2_v0.12.zip HERE
- Flash POST-sGSI_3.zip HERE
- Flash P-lag-fix.zip file below thread
- Flash incall2.zip HERE
- Reboot
When flashing POST-sGSI untill incall shown error in twrp, Go back to TWRP Home > Mount > check vendor and system
After bootup, you need to install Google Play services 12.8.72 (100400-202717283) HERE
If you are facing with bug Reboot Loop(always reboot into TWRP) you need to restore this backup file from me.
Unzip and put that folder at TWRP/Backups
Goto TWRP > Restore > Check system and vendor only > Reboot.
SECOND METHOD : Restore before 1st boot.
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP3-sGSI.img HERE
- Flash POST-sGSI_1_v0.9.zip HERE
- Flash POST-sGSI_2_v0.12.zip HERE
- Flash POST-sGSI_3.zip HERE
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2101MB).
- Flash P-lag-fix.zip file below thread
- Flash incall2.zip HERE
- Reboot (If stuck at google logo about 3-5mins, try to force shutdown your phone, and turn it on again... it should be work.)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
ANDROID P DP4
CLEAN FLASH IS HIGHLY RECOMMEND
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP4-sGSI-Aonly.zip HERE
- Flash POST-sGSI_1_v0.11.zip HERE
- Flash POST-sGSI_2_v0.14.zip HERE
- Flash POST-sGSI_3.zip HERE
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2180MB).
- Incall.zip already included. Dont need to flash it.
- Flash p-lag-fix DP4.zip file below thread
- Reboot
If your device become reboot loop into TWRP, like in DP3
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2180MB).
Click to expand...
Click to collapse
ANDROID P DP5
CLEAN FLASH IS HIGHLY RECOMMEND
- Flash [JDCTeam][TREBLE][v4][Gemini] The Full Treble support project HERE
- Unzip and Flash P-DP5-sGSI-Aonly.zip HERE
- Flash POST-sGSI_1_v0.13.zip HERE
- Flash POST-sGSI_2_v0.16.zip HERE
- Flash POST-sGSI_3 v0.2.zip HERE
- Flash lag-fix-DP5 attached below.
- Mount Vendor on TWRP
- Go to TWRP Advanced->Terminal, type the following and press enter
echo persist.sys.disable_rescue=true >> /vendor/build.prop
- Reboot to System
IF YOU STILL REBOOT INTO RECOVERY AFTER 1ST BOOT.
after flash POST-sGSI_3 v0.2.zip
- Restore this backup file
(Make sure choose System and Vendor only, Dont choose boot, system image, or vendor image and the size is 2180MB).
- Incall.zip already included. Dont need to flash it.
- Flash lag-fix-DP5 attached below.
- Reboot
Click to expand...
Click to collapse
Android P Public Release 1 (PR1)
1. Flash JDCTeam Full Treble Support Project
2. UNZIP and flash Pie A-only as System Image.
3. Mount System and Vendor on TWRP
4. Flash POST-sGSI_1_v0.14.zip
5. Flash POST-sGSI_2_v0.17.zip
6. Flash POST-sGSI_3_v0.2.zip
7. Mount System and Vendor on TWRP
8. Flash p-lag-fix.zip (Attached Below)
9. Mount Vendor on TWRP
10. Go to TWRP Advanced - Terminal, type the following and press enter
echo persist.sys.disable_rescue=true >> /vendor/build.prop
11. Reboot to System
12. Install Google Play Services Apk, reboot and proceed normally.
Click to expand...
Click to collapse
REBOOT LOOP THIRD METHOD by mlira1 and Maixf
1. Flash JDCTeam Full Treble Support Project
2. Flashi DP3/DP4 System Image
3. Mount System and Vendor on TWRP
4. Flash POST-sGSI_1
5. Flash POST-sGSI_2
6. Flash POST-sGSI_3 (skip if going to flash custom kernel)
7. (only if going to flash custom kernel) Flash fix.zip (attached below)
8. (optional) Flash custom kernel
9. (optional) Flash Magisk
10. Mount System and Vendor on TWRP
11. (only if flashed custom kernel) Flash POST-sGSI_3
12. Flash p-lag-fix DP3/4/5.zip
13. Mount Vendor on TWRP
14. Go to TWRP Advanced->Terminal, type the following and press enter
echo persist.sys.disable_rescue=true >> /vendor/build.prop
15. Reboot to System
16. Install Google Play Services Apk, reboot and proceed normally
Click to expand...
Click to collapse
TIPS
Mi5 'Fingerprint Always On' On Android P (Unlock when screen off, and without press any button. Just touch it FP)
- Root your Mi5 with 16.4/16.6 Treble version
- Install Karnel Auditor
- Go to Tab, Select Custom Control
- Press "+", and import this .json file
- Press 3 dots at there, check 'on boot'
- Reboot
Click to expand...
Click to collapse
Mi5 Fingerprint as Home by rmrbpt
- Root your Mi5 with 16.4/16.6 Treble version
- Install Karnel Auditor
- Go to Tab, Select Custom Control
- Press "+", and import this .json file
- Press 3 dots at there, check 'on boot'
- Reboot
Click to expand...
Click to collapse
Mi5 Double Tap to Wakeup Android P
- Root your mi5 with 16.4/16.6 Treble version
- Open Karnel Auditor
- Go to Tab
- Find 'Wake'
- Turn it on, and apply on boot
- Reboot
Click to expand...
Click to collapse
Disable backlight button
Flash Disable Backlight.zip from Magisk !
Attached below.
Click to expand...
Click to collapse
Fix Battery Drain Issue
Still working on it
Alternative for it
- Dissable Dev Mode in Setting
or
- Try custom karnel
Click to expand...
Click to collapse
Get Blue accent / Pixel theme
Add this to your /vendor/build.prop, save and reboot:
Code:
ro.boot.vendor.overlay.theme=com.google.android.theme.pixel
Click to expand...
Click to collapse
MTP Not Detected
- Goto Setting
- System > Advanced > Dev Options > Choose File Transfer at USB Default Configuration
Click to expand...
Click to collapse
How to flash custom kernel on P GSI
FLASHING CUSTOM KARNEL CAUSING YOU CANNOT ENABLE MTP FORVER AND CHARGING FROM PC/LAPTOP
- Follow instruction from flashing JDC untill POST GSI 2, dont flash POST GSI 3.
- Flash Custom Karnel
- Reboot
- Clean Flash is the only way to fix it for now
Click to expand...
Click to collapse
Fix/Solution Arnova/BSG/other dev Gcam lag when changging between front and back camera on P
- Flash Camera Switch Lag Fix.zip, attached below.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Terribly sorry but at what point did you make that "backup file"? I couldn't fix bootloop without your backup. Just wondering, since it's so large and probably mi5-only maybe you could just give us instructions how to make a working system without using someone else's backup?
After restore, have been stuck in G logo for 25 minutes, just followed the instruction
mansonstein said:
After restore, have been stuck in G logo for 25 minutes, just followed the instruction
Click to expand...
Click to collapse
Try select system only. goodluck.
mansonstein said:
After restore, have been stuck in G logo for 25 minutes, just followed the instruction
Click to expand...
Click to collapse
dont choose system image and vendor image.
but system and vendor only
bukandenny said:
dont choose system image and vendor image.
but system and vendor only
Click to expand...
Click to collapse
Yes, exactly, and I tried just system and just vendor, all stucked in G logo. Someway else to try? What causes reboot loop? Thx
If anyone successed, please let me know how you did it.
mansonstein said:
If anyone successed, please let me know how you did it.
Click to expand...
Click to collapse
3 times i used that way, and always work.
asking someone to do that, its work.
mansonstein said:
If anyone successed, please let me know how you did it.
Click to expand...
Click to collapse
try second methode above.
https://drive.google.com/open?id=1VryExVHI-14NfgIcBPp2dFiN-rzhOeNO
I've tried both the methods , but I always end up at this error, please help.
It asks for password and then just reboots into recovery.
There's also a pop up stating "There's internal problem, please contact manufacturer for details"
The above link has the images of the issue.
It would be really helpful if someone can help me boot this rom up. Thank you.
Santosh Kolur said:
https://drive.google.com/open?id=1VryExVHI-14NfgIcBPp2dFiN-rzhOeNO
I've tried both the methods , but I always end up at this error, please help.
It asks for password and then just reboots into recovery.
There's also a pop up stating "There's internal problem, please contact manufacturer for details"
Click to expand...
Click to collapse
Start from beginning.
you need to FORMAT DATA (not wipe data)
then start from beginning dude.
Santosh Kolur said:
https://drive.google.com/open?id=1VryExVHI-14NfgIcBPp2dFiN-rzhOeNO
I've tried both the methods , but I always end up at this error, please help.
It asks for password and then just reboots into recovery.
There's also a pop up stating "There's internal problem, please contact manufacturer for details"
The above link has the images of the issue.
It would be really helpful if someone can help me boot this rom up. Thank you.
Click to expand...
Click to collapse
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
bukandenny said:
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
Click to expand...
Click to collapse
Thank you. I got it to boot using your solution.
Santosh Kolur said:
Thank you. I got it to boot using your solution.
Click to expand...
Click to collapse
Decrypting internal storage fixes reboots?
Yes it did for me.
First method did it for me, too. I had the bootloop after first reboot and it did the trick, everything is working fine, a bit laggy, but Android P is running smooth on my phone!! I think that's very importat that after first boot you install Play Services as stated in OP and let Google finish its whole Pixel Configuration and updates, then you can try and reboot the phone, if you're hit by the bug, just follow what's in OP.
Few things if you install the GSI and have these issues:
- for Magisk, install version 16.4, just install that after you have set up the phone and stuff, you reboot to twrp and flash it, that's the way it works for me;
- if you have missing network on SIM, just go and configure your apn manually, it'll do the trick;
- for MTP, it's not working for me out of the box, the trick is to enable developers options, go to "Default USB Configuration" or something similar (I have it on italian, so I think that's how it's in English) and select the first one option;
Edit: also there's fingerprint that cannot wake the device, I've read in Telegram groups that some fixes are around for fingerprint, I'll check it out later and report if I find something interesting.
I've suceeded but my FP isn't working, already sent the logcat to the main xda page of GSI
g33k0 b3lk0w said:
I've suceeded but my FP isn't working, already sent the logcat to the main xda page of GSI
Click to expand...
Click to collapse
Cool! So I think there's no solution to this issue at the moment?
aittamattia said:
Cool! So I think there's no solution to this issue at the moment?
Click to expand...
Click to collapse
wait ill upload, u can see my chat on group
I prepared a stripped down version for NUBIA RED MAGIC 2.36 CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
I take out a lot of CN applications. You can flash over the OpenGAPPS and get Google applications, make the ROM more usable in the European countries.
DOWNLOAD
https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
Install:
- First: don't forget to backup your files, if you come from Global ROM you will need to erase also internal storage of your phone!
- you will need TWRP installed. Look how to in sakilxda's thread (thank you sakilxda! ): https://forum.xda-developers.com/red-magic/how-to/unlock-bootloader-flasah-twrp-nubia-red-t3828466
- Download Oppen Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
- copy the downloaded ROM and GAPPS in your phone's internal storage
- go in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
- go to install menu and chose the ROM add to zip list also the GAPPS you downloaded: IS IMPORTANT TO FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY!
- OPTIONAL: you can add also blu_spark r36 Red Magic's kernel (THANK YOU blu_spark) from: https://forum.xda-developers.com/red-magic/development/kernel-t3813055
- Wipe cache when finish and reboot!
Good luck!
Screen shots
Great! I am going to try now and will let you know the result. Thank you so much!
---------- Post added at 03:55 AM ---------- Previous post was at 03:52 AM ----------
I faced the error: "invalid zip file format" ----> this is my mistake, sorry ^^
---------- Post added at 04:17 AM ---------- Previous post was at 03:55 AM ----------
I have flashed but stucking at " checking for updates"...
---------- Post added at 04:42 AM ---------- Previous post was at 04:17 AM ----------
I have passed the problem. I am feeling happy with this rom. Thanks a lot!
---------- Post added at 04:50 AM ---------- Previous post was at 04:42 AM ----------
@ABM30: could you please guide me to root it?
Flash magisk zip file check xda through twrp and then install the magisk manager apk like any other app.
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
strakell said:
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
Click to expand...
Click to collapse
If you stuck on searching updates: just push power button and slide the restart button.
After this it will start over but will pass the update chek!
For root: download the magisk.apk and Magisk-v18.1(18100).zip from download link that I have given.
Put them in your phones internal storage. Install magisk.apk and run it once.
Then go in recovery TWRP and instal Magisk-v18.1(18100).zip, wipe cahe when asked.
Restart phone =>ROOTED!
You can find Magisk also in google Play!.
Have fun!
strakell said:
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
Click to expand...
Click to collapse
ok
1. The error: "invalid zip file format" ----> I forgot to extract the zip file that I download from Mega.nz .
2. Stucking at " checking for updates"... ---> I removed sim card then restarted. After that, I skipped all of setup steps. after all, I can access home screen launcher.
Now I found the bug: I can not access to "developer options" in settings
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
ABM30 said:
If you stuck on searching updates: just push power button and slide the restart button.
After this it will start over but will pass the update chek!
For root: download the magisk.apk and Magisk-v18.1(18100).zip from download link that I have given.
Put them in your phones internal storage. Install magisk.apk and run it once.
Then go in recovery TWRP and instal Magisk-v18.1(18100).zip, wipe cahe when asked.
Restart phone =>ROOTED!
You can find Magisk also in google Play!.
Have fun!
Click to expand...
Click to collapse
thank you, but where are download links of the magisk.apk and Magisk-v18.1(18100).zip that you told?
oh sorry, I have saw them: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
ABM30 could you please explain step by step how I can get twrp and how go back to official recovery so I can flash official ROM ,I really appreciate that!
strakell said:
ABM30 could you please explain step by step how I can get twrp and how go back to official recovery so I can flash official ROM ,I really appreciate that!
Click to expand...
Click to collapse
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
tlgod said:
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
Click to expand...
Click to collapse
Thank you very much for your time ,I think you forget to write in line 2 after the unlock bootloader what I have to type in adb for the custom recovery
tlgod said:
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
Click to expand...
Click to collapse
THANK YOU tlgod! Well done!
There is also the alternative to go back to official ROM:
1. Download the official ROM - CN or Global - you can find links in this thread
2. Copy ROM in internal storage (preferable in root)
3. Go in Settings-System Update-Menu (3 dots in upper right corner) - local update
4. Choose the ROM you downloaded and install > if you choose CN ROM: you are back to original recovery, boot, ROM
5. If you want to go back to global ROM you will have some more steps: need to wipe all USER DATA and CACHE in original Recovery after update (this will erase your internal memory !!!!!!!!!!!!!!! so BACKUP BACKUP....!!!!!!, now the phone can be restarted.
Global ROM will encrypt your Phone!!!! therefore when you go from Global to CN or back you need to wipe your USER DATA and lost everything from internal storage!!!!!!!!!!!!!
You can watch also: https://www.youtube.com/watch?v=z5wOxvzxrfQ
Is in Spanish but ..self explanatory
strakell said:
Thank you very much for your time ,I think you forget to write in line 2 after the unlock bootloader what I have to type in adb for the custom recovery
Click to expand...
Click to collapse
In download link I given you can find everything you need: ROM, Magisk and now also TWRP: twrp-3.2.3-0-nx609j.img
it can be used for TWRP installing as mentioned by tlgod!
tlgod said:
ok
1. The error: "invalid zip file format" ----> I forgot to extract the zip file that I download from Mega.nz .
2. Stucking at " checking for updates"... ---> I removed sim card then restarted. After that, I skipped all of setup steps. after all, I can access home screen launcher.
Now I found the bug: I can not access to "developer options" in settings
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
thank you, but where are download links of the magisk.apk and Magisk-v18.1(18100).zip that you told?
oh sorry, I have saw them: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
Click to expand...
Click to collapse
Yes, I put everything in one folder (ROM Magisk.apk and zip, twrp), so you don't need another link.
For developer bug: you need to root the phone and you will get acces to developer options!
P.S. Sometimes a restart is also a good option!
ABM30 said:
In download link I given you can find everything you need: ROM, Magisk and now also TWRP: twrp-3.2.3-0-nx609j.img
it can be used for TWRP installing as mentioned by tlgod!
Click to expand...
Click to collapse
Like this:
fastboot flash recovery twrp-3.2.3-0-nx609j.img
Is it correct?
strakell said:
Like this:
fastboot flash recovery twrp-3.2.3-0-nx609j.img
Is it correct?
Click to expand...
Click to collapse
rename the recovery twrp-3.2.3-0-nx609j.img to recovery.img and then: fastboot flash recovery recovery.img this is how it worked to me.
ABM30 said:
rename the recovery twrp-3.2.3-0-nx609j.img to recovery.img and then: fastboot flash recovery recovery.img this is how it worked to me.
Click to expand...
Click to collapse
Now I get it right. Thanks.
ABM30 said:
Yes, I put everything in one folder (ROM Magisk.apk and zip, twrp), so you don't need another link.
For developer bug: you need to root the phone and you will get acces to developer options!
P.S. Sometimes a restart is also a good option!
Click to expand...
Click to collapse
Thank you, I have done that and It works!
A little help please , I did the procedure to unlock bootloader and flash custom recovery all went ok right away from the fastboot mode I went to twrp which was in Chinese I change the language to English I didn't do anything enything else because for now I only wanted to have custom recovery to flash magisk, i reboot to ROM I had all nice till now but when I'm trying to reboot to recovery to flash magisk I can't find the twrp only official recovery ,what am I doing wrong?
strakell said:
A little help please , I did the procedure to unlock bootloader and flash custom recovery all went ok right away from the fastboot mode I went to twrp which was in Chinese I change the language to English I didn't do anything enything else because for now I only wanted to have custom recovery to flash magisk, i reboot to ROM I had all nice till now but when I'm trying to reboot to recovery to flash magisk I can't find the twrp only official recovery ,what am I doing wrong?
Click to expand...
Click to collapse
Unfortunately it has happened to me also at the beginning. My unlocking counter is at 20.
So you need to do the following:
Unlock your bootloader again, flash TWRP (again ), go through ROM install procedure (again) as I mentioned in 1st post, but this time put also blu_spark r36 Red Magic's kernel in zip list to be flashed. In this way the original kernel (which has some security measures implemented in it and in case of some modifications in ROM it will overwrite the recovery with a backup from internal memory, I think is located in DATA folder...) will be overwritten and recovery will be preserved. At least this procedure I find at this moment.
Good Luck!
i'm try Red Magic OS V3.06 android Pie, and new Game Mode are perfect, but not have gapp, im test flash gapp in twrp but not work, you can pls help me add opengapp to new rom.
Thanks you very much.
chipheo62 said:
i'm try Red Magic OS V3.06 android Pie, and new Game Mode are perfect, but not have gapp, im test flash gapp in twrp but not work, you can pls help me add opengapp to new rom.
Thanks you very much.
Click to expand...
Click to collapse
Till now I didn't succeed to, but keep working on.
64-bit Base Package For GSI Redmi 7A
Flashing instructions ?
• Boot to recovery
• Flash given zip file (Downloads section)
• Wipe system
• Flash any arm64 GSI of your choice to system image
• Format data, wipe cache
• Flash gapps, magisk, etc...
• Boot to system, congrats you're on arm64.
Changelog:
- Fixed camera service crashing.
- Gcams can now run on Enforcing mode.
- Swap is disabled by default in favor of ZRAM.
- Fixed more services crashing that just filled up the logcat.
- Changed to Global for better overlay compatibility
- ViperFX now works in Enforcing mode where as before it would be unstable.
- Camera doesn't take as long to launch now.
Old Changes (from previous vendor/post):
• Fix bt audio, cleanup audio configs
• Add exfat fix
• Fix headphones
• Fix video recording
• Enable pseudo-gyro (emulated gyroscope from miui)
Downloads :
Base
mirror link
Bugs ?
• VoLTE doesn't work (fix: https://t.me/Redmi7AUpdates/98)
Things to point out:
- As mentioned on the previous release, Pie and Amber/Erfan based GSIs can't boot on Enforcing mode, in which case the Permissiver v5 zip from #permissiver is necessary.
- The FM Radio fix found in notes doesn't work anymore, use this instead (http://www.mediafire.com/file/wgnysvjo362yuco/FM_Radio-Fix.zip/file) and flash through Magisk.
- If you are having any camera related issues then switch to Permissive mode.
-Fixed some stuff and made a new one.
-Sadly, upgrading directly from the old one isn't possible and formatting data is required, I tried to make it upgradable but with no success.
*Currently using Havoc os 3.8"
And credits to telegram redmi 7a team and for the developers who work so hard for this project I do not own this work
Join here need telegram app on windows and android and dont forget to like my post https://t.me/PineOfficial
just flash permissiver to make wired headphone work
for me blissrom arm64 is smooth with face unlock unless u use android 9 as base firmware to have encryption or else u cant add password
daizu said:
just flash permissiver to make wired headphone work
for me blissrom arm64 is smooth with face unlock unless u use android 9 as base firmware to have encryption or else u cant add password
Click to expand...
Click to collapse
True, use MIUI A9 base to get encryption working on TWRP.
No chance to get this working on MIUI?
iagm12 said:
No chance to get this working on MIUI?
Click to expand...
Click to collapse
theres no way and also memeUI sucks
Custom Roms GSIs are better
edit:
there is new a update bluetooth already fix and other bugs..
iagm12 said:
No chance to get this working on MIUI?
Click to expand...
Click to collapse
You could try to use this on a MIUI GSI ported from the Redmi 8 maybe, but I don't know if it would work completely.
Maybe Erfan's GSI builds? https://mirrors.lolinet.com/firmware/gsi/MIUI/
---------- Post added at 03:24 PM ---------- Previous post was at 03:22 PM ----------
Also, not to nitpick, but my username is different in XDA.
https://forum.xda-developers.com/redmi-7a/how-to/redmi-7a-arm64-kernel-t4134381
I'm the kernel dev.
---------- Post added at 03:29 PM ---------- Previous post was at 03:24 PM ----------
Also, I'm going to try out Ubports if I can. It would be interesing to see if it would work because of the Q vendor.
Great Work, congrats <3
i have ask helios developer (maintainer of helios gsi) to resize the gsi of redmi 8 (redmi 8 has 3.5 gb raw image that cant be flash easy to our phone which has only 3gb)
"Flash any arm64 GSI of your choice to system image" i dont know what is this, but can u give me yours?
all using just twrp to flash?
How did you root your device? Im currently on MIUI 11.0.3 Q and there's no TWRP or any magisk rooting files/guide that is updated.
Good work btw. If you can share your rooting method and TWRP this can be an ALL IN ONE guide. Many thanks!
EDIT: Its working right now, but thing is I cant flash anything from internal storage, it shows weird letters (encrypted). Its Pitch Black Recovery 3.0. How did you solve this?
regularfanb0y said:
EDIT: Its working right now, but thing is I cant flash anything from internal storage, it shows weird letters (encrypted). Its Pitch Black Recovery 3.0. How did you solve this?
Click to expand...
Click to collapse
Had the same situation here on my 7A with TWRP, i also couldn't transfer the files via file Explorer from Windows to the 7A
because of the encryption (the copy and paste window doesn't do anything and disapears after a while).
Solution to this is:
Format Data > Yes
[Warning - outdated - OP has replaced the fw+vendor file 11.0.3 to 11.0.11]
Explaning some stuff about GSI basics
If this GSI stuff is also new to you like it is to me:
When working with GSI it's important to understand that the version which is currently running on your device, lets say V10.2.5 for example,
has the same version of your patched boot image (actually the boot image is build to fit for the currently running version i guess)
In this Thread the Base (11.0.3 Q FW) must have the same Version as the currently running version.
At the beginning i didn't know how this should work out because in all the other GSI Rom guides there is a patched boot image file in use
but if you want to use this Base (11.0.3 Q FW) there is no V11.0.3 GLOBAL patched boot image file to use?, just russia.
(see https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305 link in download section)
but then i read somewhere that the boot img also/always is part of the stock image and then i saw that the actual stock image from c. mi. com homepage is V11.0.3.
the second thing that doesn't made sense to me was: does Base (11.0.3 Q FW) mean you only can run Android 10 on it and why are there "higher versions" like Base (11.0.7 P FW) for the older Android P?
but anyway i had all the needed files to give it a try.
Instructions how to get from some sort of a corrupt status xy --> StockRom
Because i did some testing with Rom's i needed a "starting point" = this means unlocked Bootloader, Stock Rom V11.0.3, recovery installed
This was necessary for me to find out what step causes problems and also to "reset" the boot.img if i used a patched one
So this was my loop i did everytime to get from some sort of a corrupt status "xy" back to "starting point":
Enter Fastboot mode (Vol-Down & Power)
Install Stock Rom "pine_global_images_V11.0.3.0.QCMMIXM_20200717.0000.00_10.0_global" from c .mi .com homepage by using the software "MiFlash 2020.3.14.0"
(if you use MiFlash for the first time go to Driver --> install & wait for weird message.)
(it's important to use the V11.0.3.0. if you want to run the "64-bit Base Package For GSI Redmi 7A")
if your bootloader is unlocked at this moment choose "clean all" at the bottom of MiFlash instead of "clean all and lock".
("clean all" always ends with the error "error: Not catch checkpoint (\$fastboot -s .*lock), flash is not done" but you can ignore this one)
After install Stock Rom is finished let the device boot to system
if you already have a unlocked bootloader and you used "clean all" option you can now shut down the device and then enter Fastboot mode (Vol-Down & Power)
if you used "clean all and lock" with a previous unlocked bootloader you can quickly unlock it again by entering Fastboot mode and using the "Mi Unlock" software for Windows.
if your bootloader was never unlocked before you now have to do the complete process:
enable the developer options, go to "Mi unlock status" and register/LOGIN ON YOUR DEVICE into Mi-Account, install "Mi Unlock" software on PC and then you can unlock it.
anyways, if your bootloader is unlocked - shut down the device and then enter Fastboot mode (Vol-Down & Power)
[not flashing boot.img, already mentioned why not ]
use fastboot to flash vbmeta.img
vbmeta file
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use fastboot to flash recovery.img
TWRP recovery
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
go to recovery by holding Vol-Up & Power
-->my starting point to testing different settings...
Wipe Dalvik / ART cache, System, Data, Cache.
Format Data > Yes
Do not wipe Internal Storage!
copy the following files to the devices sdcard:
Base (11.0.3 Q FW) - fw_vendor_pine_64bit-rel_11.0.3MI.zip File from download section [Warning - outdated - OP has removed this file]
"lineage-17.1-20200808-UNOFFICIAL-treble_arm64_bvN.img" (thats the one i've used but any arm64 GSI of your choice should work)
link in Download section at: https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Permissiver v5:
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
FM Radio fix: [EDIT: dont use this because LOS bootscreen will stuck in a flickering loop]
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use FM-Radio_(GSI).zip instead [EDIT: app doesnt work because of errormessage]
https://forum.xda-developers.com/attachment.php?attachmentid=4937895&d=1580288989
worked for me, thanks @dmitrypershin2015
Flash fw_vendor_pine_64bit-rel_11.0.3MI.zip aka "Base (11.0.3 Q FW)"
Wipe system
Flash any arm64 GSI of your choice to system image
Reboot to Recovery
Flash Magisk (optional) (not tested here)
Flash Permissiver v5
Flash GApps (optional) (not tested here)
If you get 'insufficient space' error, first resize System partition.
Flash FM-Radio_(GSI).zip
Reboot system and enjoy.
As already mentioned the FM Radio fix doesn't work, if you skip it LOS boots perfectly
another bug: No other color of the Notification LED than white
Somewhere in the Forum there is a link to Permissiver v4 instead of v5, cant say if v4 works fine but v5 does
mYXiao said:
I had some troubles getting this running, but finally i made it
If this GSI stuff is also new to you like it is to me:
When working with GSI it's important to understand that the version which is currently running on your device, lets say V10.2.5 for example,
has the same version of your patched boot image (actually the boot image is build to fit for the currently running version i guess)
In this Thread the Base (11.0.3 Q FW) must have the same Version as the currently running version.
At the beginning i didn't know how this should work out because in all the other GSI Rom guides there is a patched boot image file in use
but if you want to use this Base (11.0.3 Q FW) there is no V11.0.3 GLOBAL patched boot image file to use?, just russia.
(see https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305 link in download section)
but then i read somewhere that the boot img also/always is part of the stock image and then i saw that the actual stock image from c. mi. com homepage is V11.0.3.
the second thing that doesn't made sense to me was: does Base (11.0.3 Q FW) mean you only can run Android 10 on it and why are there "higher versions" like Base (11.0.7 P FW) for the older Android P?
but anyway i theoretically had all the files to give it a try.
But i had to flash Stock Rom for many times because i wanted to start from the same starting point so i could find out what step causes the problem
and also to "reset" the boot.img if i had used a patched one
So this was my loop i did everytime to get from some sort of a corrupt status back to "my starting point" = this means unlocked Bootloader, Stock Rom V11.0.3 and recovery installed
[ beginning of loop
Enter Fastboot mode (Vol-Down & Power)
Install Stock Rom "pine_global_images_V11.0.3.0.QCMMIXM_20200717.0000.00_10.0_global" from c .mi .com homepage by using the software "MiFlash 2020.3.14.0"
(if you use MiFlash for the first time go to Driver --> install & wait for weird message.)
(it's important to use the V11.0.3.0. if you want to run the "64-bit Base Package For GSI Redmi 7A")
if your bootloader is unlocked at this moment choose "clean all" at the bottom of MiFlash instead of "clean all and lock".
("clean all" always ends with the error "error: Not catch checkpoint (\$fastboot -s .*lock), flash is not done" but you can ignore this one)
After install Stock Rom is finished let the device boot to system
if you already have a unlocked bootloader and you used "clean all" option you can now shut down the device and then enter Fastboot mode (Vol-Down & Power)
if you used "clean all and lock" with a previous unlocked bootloader you can quickly unlock it again by entering Fastboot mode and using the "Mi Unlock" software for Windows.
if your bootloader was never unlocked before you now have to do the complete process:
enable the developer options, go to "Mi unlock status" and register/LOGIN ON YOUR DEVICE into Mi-Account, install "Mi Unlock" software on PC and then you can unlock it.
anyways, if your bootloader is unlocked - shut down the device and then enter Fastboot mode (Vol-Down & Power)
[not flashing boot.img, already mentioned why not ]
use fastboot to flash vbmeta.img
vbmeta file
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use fastboot to flash recovery.img
TWRP recovery
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
] end of loop -> my starting point to testing different settings...
go to recovery by holding Vol-Up & Power
Wipe Dalvik / ART cache, System, Data, Cache.
Format Data > Yes
Do not wipe Internal Storage!
copy the following files to the devices sdcard:
Base (11.0.3 Q FW) - fw_vendor_pine_64bit-rel_11.0.3MI.zip File from download section
"lineage-17.1-20200808-UNOFFICIAL-treble_arm64_bvN.img" (thats the one i've used but any arm64 GSI of your choice should work)
link in Download section at: https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Permissiver v5:
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
FM Radio fix: [EDIT: dont use this because LOS bootscreen will stuck in a flickering loop]
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use FM-Radio_(GSI).zip instead
https://forum.xda-developers.com/attachment.php?attachmentid=4937895&d=1580288989
worked for me, thanks @dmitrypershin2015
Flash fw_vendor_pine_64bit-rel_11.0.3MI.zip aka "Base (11.0.3 Q FW)"
Wipe system
Flash any arm64 GSI of your choice to system image
Reboot to Recovery
Flash Magisk (optional) (not tested here)
Flash Permissiver v5
Flash GApps (optional) (not tested here)
If you get 'insufficient space' error, first resize System partition.
Flash FM-Radio_(GSI).zip
Reboot system and enjoy.
I found out that the FM Radio fix doesn't work here, if you skip it LOS boots perfectly
Somewhere in the Forum there is a link to Permissiver v4 instead of v5, cant say if v4 works fine but v5 does
Click to expand...
Click to collapse
Whats the FM radio GSI zip for?
List of GSIs I've tried on 11.0.3 64 bit
Boots:
Havoc OS (Camera and Screenrecording bug)
Bliss Q (Camera and Weird cutted corners)
Bootleggers (Camera, Weird cutted corners and Brightness cant adjust)
Evolution X (Camera and Brightness cant adjust)
LOS 17 (Camera)
Dont boot:
N/A
Anyone here have a fix for camera, Brightness, Screenrecording and weird cut corners?
regularfanb0y said:
Whats the FM radio GSI zip for?
Click to expand...
Click to collapse
If i boot LOS 17 without the FM radio GSI zip the default FM Radio App which should be preinstalled isn't. flashing the zip fixed that.
regularfanb0y said:
Anyone here have a fix for camera, Brightness, Screenrecording and weird cut corners?
Click to expand...
Click to collapse
All i can say is that i tested Camera, Weird cutted corners and Brightness and Screenrecording on LOS 17 based on 11.0.3 64 bit . Everything works so far
PS: Can you please edit your quote so only the lines you refer to getting repeated? thx
does it work with the feature ： wireless fm radio？
so you can play sky children of light with this or games 64 bit based?
mYXiao said:
I had some troubles getting this running, but finally i made it
If this GSI stuff is also new to you like it is to me:
When working with GSI it's important to understand that the version which is currently running on your device, lets say V10.2.5 for example,
has the same version of your patched boot image (actually the boot image is build to fit for the currently running version i guess)
In this Thread the Base (11.0.3 Q FW) must have the same Version as the currently running version.
At the beginning i didn't know how this should work out because in all the other GSI Rom guides there is a patched boot image file in use
but if you want to use this Base (11.0.3 Q FW) there is no V11.0.3 GLOBAL patched boot image file to use?, just russia.
(see https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305 link in download section)
but then i read somewhere that the boot img also/always is part of the stock image and then i saw that the actual stock image from c. mi. com homepage is V11.0.3.
the second thing that doesn't made sense to me was: does Base (11.0.3 Q FW) mean you only can run Android 10 on it and why are there "higher versions" like Base (11.0.7 P FW) for the older Android P?
but anyway i theoretically had all the files to give it a try.
But i had to flash Stock Rom for many times because i wanted to start from the same starting point so i could find out what step causes the problem
and also to "reset" the boot.img if i had used a patched one
So this was my loop i did everytime to get from some sort of a corrupt status back to "my starting point" = this means unlocked Bootloader, Stock Rom V11.0.3 and recovery installed
[ beginning of loop
Enter Fastboot mode (Vol-Down & Power)
Install Stock Rom "pine_global_images_V11.0.3.0.QCMMIXM_20200717.0000.00_10.0_global" from c .mi .com homepage by using the software "MiFlash 2020.3.14.0"
(if you use MiFlash for the first time go to Driver --> install & wait for weird message.)
(it's important to use the V11.0.3.0. if you want to run the "64-bit Base Package For GSI Redmi 7A")
if your bootloader is unlocked at this moment choose "clean all" at the bottom of MiFlash instead of "clean all and lock".
("clean all" always ends with the error "error: Not catch checkpoint (\$fastboot -s .*lock), flash is not done" but you can ignore this one)
After install Stock Rom is finished let the device boot to system
if you already have a unlocked bootloader and you used "clean all" option you can now shut down the device and then enter Fastboot mode (Vol-Down & Power)
if you used "clean all and lock" with a previous unlocked bootloader you can quickly unlock it again by entering Fastboot mode and using the "Mi Unlock" software for Windows.
if your bootloader was never unlocked before you now have to do the complete process:
enable the developer options, go to "Mi unlock status" and register/LOGIN ON YOUR DEVICE into Mi-Account, install "Mi Unlock" software on PC and then you can unlock it.
anyways, if your bootloader is unlocked - shut down the device and then enter Fastboot mode (Vol-Down & Power)
[not flashing boot.img, already mentioned why not ]
use fastboot to flash vbmeta.img
vbmeta file
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use fastboot to flash recovery.img
TWRP recovery
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305] end of loop -> my starting point to testing different settings...
go to recovery by holding Vol-Up & Power
Wipe Dalvik / ART cache, System, Data, Cache.
Format Data > Yes
Do not wipe Internal Storage!
copy the following files to the devices sdcard:
Base (11.0.3 Q FW) - fw_vendor_pine_64bit-rel_11.0.3MI.zip File from download section
"lineage-17.1-20200808-UNOFFICIAL-treble_arm64_bvN.img" (thats the one i've used but any arm64 GSI of your choice should work)
link in Download section at: https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Permissiver v5:
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
FM Radio fix: [EDIT: dont use this because LOS bootscreen will stuck in a flickering loop]
https://forum.xda-developers.com/redmi-7a/how-to/guide-install-lineage-os-17-x-redmi-7a-t4142305
use FM-Radio_(GSI).zip instead
https://forum.xda-developers.com/attachment.php?attachmentid=4937895&d=1580288989
worked for me, thanks @dmitrypershin2015
Flash fw_vendor_pine_64bit-rel_11.0.3MI.zip aka "Base (11.0.3 Q FW)"
Wipe system
Flash any arm64 GSI of your choice to system image
Reboot to Recovery
Flash Magisk (optional) (not tested here)
Flash Permissiver v5
Flash GApps (optional) (not tested here)
If you get 'insufficient space' error, first resize System partition.
Flash FM-Radio_(GSI).zip
Reboot system and enjoy.
I found out that the FM Radio fix doesn't work here, if you skip it LOS boots perfectly
Somewhere in the Forum there is a link to Permissiver v4 instead of v5, cant say if v4 works fine but v5 does
Click to expand...
Click to collapse
I have two redmi 7a phones, and I tried both. The first one worked the first try, but the second one does not let me install the gapps, I get error code 70 don't have enough space, I tried to resize system but I get an error and if I try again it works but when starting the phone it stuck in the logo (I already installed FM radio gsi). I don't understand why that happens
Jak08 said:
so you can play sky children of light with this or games 64 bit based?
Click to expand...
Click to collapse
I would also wish to know this, will this allow arm64 apps to run? this is a new one to me ? didn't know this was even possible
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
[Update#1]
Today I have managed to install the Android Beta 3.1 [ is beta software and I don't recommend using it as your daily os]
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel4a_SBeta3.1%20-%20TBO42ZZ8IF/Pixel4a_SBeta3.1-AB-12-20210727-nippongsi.img.gz/download
you can download the ROM file from Nippon's Sourceforge
every step is the same and you just have to change the rom as this
there's a bug that developer setting crash the settings app and it is working but it does have some lots of bugs, and screen lock is not working but I'll try to fix it and upload the method
if your device get boot looped, press Bixby + power + vol down to boot into download mode and flash the stock AP file using Odin
[I was supposed to edit the upper one but accidentally created as a reply ]
Just go to UPDATE#2
Skuld Norniern said:
Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)
Click to expand...
Click to collapse
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
thongass000 said:
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
Click to expand...
Click to collapse
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Skuld Norniern said:
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Click to expand...
Click to collapse
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
thongass000 said:
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
Click to expand...
Click to collapse
Sorry for being late!!
for me, I do have the same issue with wired audio and I have not been able to find a way to fix it yet
if I manage to fix the issue I will fix the main article
Skuld Norniern said:
Skuld Norniern said:
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
Click to expand...
Click to collapse
Hello sir i can't find havoc os 4.5 in:https://download.havoc-os.com/?dir=arm64-ab
Click to expand...
Click to collapse
After flashing twrp on my sm g885f, cant get into terp,
mine shows volume down + power to restart, not to enter turn off
how can i enter into twrp
Skuld Norniern said:
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
Click to expand...
Click to collapse
'os.img file' where
, guess i fixed it
when installing Certification_Patch.zip, it shows command error
what i found- this patch is for G885FDXS5CUL1, mine is
G885FDXU5CUG1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.6.1-* For Galaxy Note 20 & Note 20 UltraOnly for exynos variants - N980F / N981B / N985F / N986B (Europe - Global, Single/Dual-SIM)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
N986BXXU3FVC5 kernel source (OneUI 4.1 / March 2022 sourcecode)
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
Recovery Features:
Android 11 tree
built in full 64 mode
toybox/busybox support
compatible with Android 12.0 and above
Downloads:
Galaxy Note 20 (c1s / N980F / N981B)
Galaxy Note 20 Ultra (c2s / N985F / N986B)
AVB disabled vbmeta
* official TWRP builds are not up yet, you can find latest test builds in post #2, below
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download AVB disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download AVB disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13100000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - c1s / c2s
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9830/tree/android-11.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu
Compatibility and changelog:
06.05.2022 - Initial TWRP 3.6.1 release
Compatibility: Android 12 (OneUI 4.0 & 4.1)
Security patch: N/A
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Background on Android Verified Boot
Rollback protection
FAQ
Q: Can i use this recovery with other firmware then mentioned in compatibility?
A: Only with same Android version or Rollback protection might kick in and you won't be able to pass the lockscreen.
Q: Where do i get vbmeta.img?
A: From here, download the one you need according to install instructions.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Phone is not booting even after 20 minutes
A: Try to reboot. If still not booting, make sure you flashed multidisabler zip / formatted data partition.
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Try to reboot. If still not booting, consider installing an older TWRP build or a more recent firmware. If you still don't succeed, post here some details about your device and previous firmware and we might be able to help.
Q: Why do i need to format data partition?
A: Because old firmware encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
Thanks for this. Where is twrp.img for Note 20 Ultra 5G / N986B
Updated first post with official pages from twrp.me, but since the builds are not up yet, i posted latest test builds in post #2.
Regards
Thanks, for this I'll keep for more year Note 20 Ultra. Time to wait or maybe make GSI for Note.
Yaayyyy
I m newbie to note 20 ultra...i want to flash root and twrp... What steps shld i follow.... Currently i m on stock non rooted.. Confused what to flash via odin..
@corsicanu
Many thanks for the latest update mate. It's working perfectly, as everything from you does
corsicanu said:
Compatibility and changelog:
06.05.2022 - Initial TWRP 3.6.1 release
Compatibility: Android 12 (OneUI 4.0 & 4.1)
Security patch: N/A
Misc links:
TeamWin official website
Telegram Support Group
Telegram Channel
Bootloaders / modems zips
Latest Magisk stable or canary
Further reading:
Full guide of how to unlock/root your device
Background on Android Verified Boot
Rollback protection
Click to expand...
Click to collapse
I notice I have bootloder on my device that I didn't install my self. I'm just a average user and have no clue how this was put on my phone. Also all of my apps are older versions an I'm unable to update them. I need help figuring out what's going on. Anyone please help!!!
@corsicanu
Many thanks for the latest update mate
1. Can I use this TWRP version with any custom ROM (e.g. Dr. Ketan ROM)?
2. Do I have to flash vbmeta.img, even when I have that custom ROM?
3. Is there a twrp.img for N986B that supports Android encryption, since right now encryption is somehow disabled after installing Dr. Ketan ROM: the lockscreen password has no effect and I can access and read all files on all partitions with the TWRP file manager !
monicaONxda said:
1. Can I use this TWRP version with any custom ROM (e.g. Dr. Ketan ROM)?
2. Do I have to flash vbmeta.img, even when I have that custom ROM?
3. Is there a twrp.img for N986B that supports Android encryption, since right now encryption is somehow disabled after installing Dr. Ketan ROM: the lockscreen password has no effect and I can access and read all files on all partitions with the TWRP file manager !
Click to expand...
Click to collapse
1. Yes as long as the rom dev doesn't have other instructions regarding the recovery used (i.e. LineageOs)
2. No, you already have some nulled vbmeta flashed since you are running a custom rom.
3. Nope, since samsung uses proprietary encryption. You can however preserve data encryption in the rom (talk that with the dev of your rom), but this will make it unreadable by twrp in any conditions. Please keep in mind that Samsung fw may not like it and it can trigger a data wipe without warnings.
Regards.
corsicanu said:
1. Yes as long as the rom dev doesn't have other instructions regarding the recovery used (i.e. LineageOs)
2. No, you already have some nulled vbmeta flashed since you are running a custom rom.
3. Nope, since samsung uses proprietary encryption. You can however preserve data encryption in the rom (talk that with the dev of your rom), but this will make it unreadable by twrp in any conditions. Please keep in mind that Samsung fw may not like it and it can trigger a data wipe without warnings.
Regards.
Click to expand...
Click to collapse
Where's 2.8
corsicanu said:
1. Yes as long as the rom dev doesn't have other instructions regarding the recovery used (i.e. LineageOs)
2. No, you already have some nulled vbmeta flashed since you are running a custom rom.
3. Nope, since samsung uses proprietary encryption. You can however preserve data encryption in the rom (talk that with the dev of your rom), but this will make it unreadable by twrp in any conditions. Please keep in mind that Samsung fw may not like it and it can trigger a data wipe without warnings.
Regards.
Click to expand...
Click to collapse
Many Thanks!
Re. 3.: With "fw" you meant FRP? But when I have root I can simply erase FRP and most Knox and other unwanted bloatware apks on /system, /product, /prism etc. ?
Btw. do you know if there is there a possibility to completely remove the Samsung ROM and replace it with a plain Android? You may lose one hardware driver for the "Sasmung Pen" but everthying else should work..?
monicaONxda said:
Many Thanks!
Re. 3.: With "fw" you meant FRP? But when I have root I can simply erase FRP and most Knox and other unwanted bloatware apks on /system, /product, /prism etc. ?
Btw. do you know if there is there a possibility to completely remove the Samsung ROM and replace it with a plain Android? You may lose one hardware driver for the "Sasmung Pen" but everthying else should work..?
Click to expand...
Click to collapse
Fw as in firmware. Regarding plain android - search for AOSP based projects, i'm not aware of the active developement so i can't properly advice you in this matter.
Regards
corsicanu said:
Official TWRP 3.6.1-* For Galaxy Note 20 & Note 20 UltraOnly for exynos variants - N980F / N981B / N985F / N986B (Europe - Global, Single/Dual-SIM)
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this recovery before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Kernel Features:
N986BXXU3FVC5 kernel source (OneUI 4.1 / March 2022 sourcecode)
disabled uh/defex/proca/knox/rkp/rooting protection/logging/audit/useless features
Recovery Features:
Android 11 tree
built in full 64 mode
toybox/busybox support
compatible with Android 12.0 and above
Downloads:
Galaxy Note 20 (c1s / N980F / N981B)
Galaxy Note 20 Ultra (c2s / N985F / N986B)
AVB disabled vbmeta
* official TWRP builds are not up yet, you can find latest test builds in post #2, below
Instructions:
Odin (Windows)
Prerequisites: Samsung USB drivers, Odin v3.14.1
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .tar file according to your device
Download AVB disabled vbmeta .tar
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Heimdall (Linux)
Install heimdall & additional required packages:
Code:
sudo apt-get update
sudo apt-get install heimdall-flash android-tools-fastboot android-tools-adb libusb-0.1-4 libusb-1.0-0 libusb-1.0-0-dev
If you already have the bootloader unlocked you can skip to step 6.
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
* Please be aware all your data will be erased including internal storage and phone will reboot!!
Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
Make sure OEM Unlock is ON in developer settings;
Turn off the phone;
Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!
Download appropriate TWRP .img file according to your device
Download AVB disabled vbmeta .img
Open your preferred terminal in linux and type (replace red lines with the path of downloaded img files):
Code:
sudo heimdall flash --RECOVERY /path/to/recovery.img --VBMETA /path/to/vbmeta.img
and press enter - once you press enter grab the phone and press vol up + power to force it boot straight in TWRP after flashing
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
TWRP
Download .img file for your device and install from your current TWRP with Install image - browse to image location and select - Recovery
dd (Requires root)
Download .img file for your device, place it in the root of your /sdcard folder, rename it to twrp.img then run the following commands via adb shell or a terminal emulator app:
Code:
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13100000.ufs/by-name/recovery
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Sources:
Device trees - c1s / c2s
Kernel - https://github.com/corsicanu/android_kernel_samsung_universal9830/tree/android-11.0
Recovery - https://github.com/omnirom/android_bootable_recovery
Credits:
TeamWin, geiti94, jesec, dyneteve, ianmacd, testers, donors and anyone else involved in making this possible
As always, if you like what i do, you can always send me some pizza/coffee/drugs/drinks or anything else via paypal.me/corsicanu
Click to expand...
Click to collapse
i am trying to root my note 20 u device. when all succesfully start from magisk module and twrp, i find the screen flicker for a second every 15 seconds. I'm trying to figure out which app the problem is from. looked in screen recorder and found the problem. apparently from system ui. then start again from the initial step one by one. and the cause of the problem is after installing twrp. I'm on Ui5.1 N986B exyns. i feel twrp has a bug
Now im use back stock recovery and problem has gone
Hi it's been a while since I last install TWRP on SS phone, it got complicated now I have few question, can you help answering?
Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
Click to expand...
Click to collapse
- For this, do I have to press the key combo 1 time only after clicking Start Odin or I have to hold till the progress done?
2.
!! Only if coming from full stock (magisk patched) firmware
In TWRP home screen press wipe - format data - yes
Download and flash multidisabler-samsung-3.* zip to disable security and encryption.
Click to expand...
Click to collapse
- I never install TWRP on my phone, do I have to follow this step?
-If yes, do I have to install that file right after TWRP first boot (when odin completed flashing)
And finally, does it support android 13?
Thank you so much