Hey guys, I know that most have already rooted on your device, but well, this tutorial is intended for those who do not know how or just are not familiar with samsung devices, anyway, let's go step by step
I am not responsible for any problem that may occur with your device, all responsibility for this procedure is entirely yours, in case something goes wrong, just flash the stock rom
1. download the version referred to your Android, remembering that the M21s and F41 are the same devices, the only difference is the region where they are sold and their storage
2. go to developer settings, activate "allow oem unlock", and turn off the device, connect it to the computer with a cable, and, as soon as you plug in the cable, press volume + and volume - at the same time, then, press and hold volume +, after this, just press one time the volume up button to confirm, the bootloader will be unlocked and the device reset, as soon as the screen "erasing" disappears, connect the cable again, pressing both buttons volume, and then, just once volume up
3. make sure your computer recognized your device in download mode, go to odin, go to "AP", and select the root file according to your android version, press "start", and it's done! just install magisk apk and let the app do the additional configuration
every time when you turn on your device, a black screen will appear saying that the software is not official from samsung, just press power, it's normal.
on oneui 2/2.5, the root is a little bit unstable, but on oneui 3 it's solved, I recommend OneUi 3 for being more stable and updated.
good luck! here are the files for Root Android 10 OneUi 2.5 and Root Android 11 OneUi 3
raphable said:
Hey guys, I know that most have already rooted on your device, but well, this tutorial is intended for those who do not know how or just are not familiar with samsung devices, anyway, let's go step by step
I am not responsible for any problem that may occur with your device, all responsibility for this procedure is entirely yours, in case something goes wrong, just flash the stock rom
1. download the version referred to your Android, remembering that the M21s and F41 are the same devices, the only difference is the region where they are sold and their storage
2. go to developer settings, activate "allow oem unlock", and turn off the device, connect it to the computer with a cable, and, as soon as you plug in the cable, press volume + and volume - at the same time, then, press and hold volume +, after this, just press one time the volume up button to confirm, the bootloader will be unlocked and the device reset, as soon as the screen "erasing" disappears, connect the cable again, pressing both buttons volume, and then, just once volume up
3. make sure your computer recognized your device in download mode, go to odin, go to "AP", and select the root file according to your android version, press "start", and it's done! just install magisk apk and let the app do the additional configuration
every time when you turn on your device, a black screen will appear saying that the software is not official from samsung, just press power, it's normal.
on oneui 2/2.5, the root is a little bit unstable, but on oneui 3 it's solved, I recommend OneUi 3 for being more stable and updated.
good luck! here are the files for Root Android 10 OneUi 2.5 and Root Android 11 OneUi 3
Click to expand...
Click to collapse
Hey Guys.
I have a question. This procedure works for every M21S? There is a way to verify if my M21S is compatible with this version of stock firmware? My specs are:
Model: SM-F415F/DS
Android 11
One UI core is 3.1
PDA/AP Version (or build number): F415FUBU1BUC1
CP version: F415FDDU1BUC1
CSC Version: F415FOWO1BUC1
MODEM/CP Version (or Baseband version) F415FDDU1BUB7
Build number RP1A.200720.012.F415FUBU1BUC1
Software version SM-415F_OWO_ZTO_RR_0012 (Region ZTO — Brazil)
Build Date 2021-03-19
Changelist/ 21183318
OS R
release on mar 2021
I Found this but it is just the stock version: https://samfrew.com/model/SM-F415F/region/ZTO/
Can anyone help me?
-
leonardo_evaldy said:
Hey Guys.
I have a question. This procedure works for every M21S? There is a way to verify if my M21S is compatible with this version of stock firmware? My specs are:
Model: SM-F415F/DS
Android 11
One UI core is 3.1
PDA/AP Version (or build number): F415FUBU1BUC1
CP version: F415FDDU1BUC1
CSC Version: F415FOWO1BUC1
MODEM/CP Version (or Baseband version) F415FDDU1BUB7
Build number RP1A.200720.012.F415FUBU1BUC1
Software version SM-415F_OWO_ZTO_RR_0012 (Region ZTO — Brazil)
Build Date 2021-03-19
Changelist/ 21183318
OS R
release on mar 2021
I Found this but it is just the stock version: https://samfrew.com/model/SM-F415F/region/ZTO/
Can anyone help me?
Click to expand...
Click to collapse
It is, but u need to download M21s stock (OneUi 3.1), extract the AP, and move the boot.img.lz4 for your device and extract the boot.img with zarchiver, then, patch that with the magisk app on device, move the magisk_patchedxxxx.img to the computer, rename it for boot.img, compress in boot.tar and flash it on AP via Odin, done ><
raphable said:
It is, but u need to download M21s stock (OneUi 3.1), extract the AP, and move the boot.img.lz4 for your device and extract the boot.img with zarchiver, then, patch that with the magisk app on device, move the magisk_patchedxxxx.img to the computer, rename it for boot.img, compress in boot.tar and flash it on AP via Odin, done ><
Click to expand...
Click to collapse
It worked. Thanks a lot, raphable
Is there any way to root this device on Androis 12 ? I've been trying but no luck... Magisk keeps showing "Installed: N/A"...
Hi Guys.. I have the same question of RodrigoC82. I upgrade my Samsung m21s to android 12 and now I cant root it. This f... vbmeta is driving me crazy.
Is there any soul who was already successfully rooted his android 12 M21s and can share the goods with us?
Best regards...
Related
So we just managed to get our Huawei P9 Plus (VIE-AL10C00B106) successfully rooted
0.) *** if you have your Bootloader UNLOCK Code from Huawei, jump to STEP 3 ****
1.) downloaded DC-Unlocker, created a account, added 4 Credits(4EUR) to account. Device should have USB DEBUG Mode enabled and you need to enable 'Manufacture' mode: in dial pad type *#*#2846579#*#* - you enter the "Project Menu", go to "Background settings" -> "USB ports settings" and switch to "Manufacture mode". Dont forget to have your device Drivers (ADB) installed
2.) Once your P9 Plus is normal booted, start DC-Unlocker (here we tested 1.00.1299) , select "huawei phones" with "auto detect" and hit the Search-Button. Your device should be found and listed with IMEI, FW ect.
If you have entered your account details under "SERVER" in dc-unlocker, you can now use the "read bootloader" Button to get your bootloader unlock code - your Credits are GONE then. SAVE THIS CODE BEFORE CLOSING DC-UNLOCKER!!!!!!
3.) Boot your device in fastboot - screen should show "locked" as status on the white screen. Type command "fastboot oem unlock XXXXXXXX" (replace the XXXX with your unlock code from DC Unlocker)
4.) Phone Screen should show a WARNING Message and offer to press VOL UP to UNLOCK phone - WARNING, if you select UNLOCK and press PWR Button to agree, DEVICE WILL INSTANTLY RESETED TO MANUFACTUR DEFAULT
5.) Download the Root-SuperSU-v2.65.zip (DIRECT DOWNLOAD) and put it on a SD-Card
6.) Download the TWRP3.0.2_EMUI4.1_H95X File (DIRECT DOWNLOAD)
7.) Reboot your phone and re-enable USB DEBUG Mode, dont forget to ALLOW Debugging via PC if promped. Insert your SD-Card with the SuperSU Zip into your phone if not already done.
8.) RUN TWRP3.0.2_EMUI4.1_H95X, it will reboot your phone in Fastboot mode. By pressing 1 and then enter, you will Install TWRP 3.0.20. Follow the instructions, by pressing enter again your phone should reboot
9.) while rebooting, HOLD VOL UP and VOL DOWN together pressed until Phone tell you "booting", it should boot into TWRP now
10.) On TWRP, in the right Corner, you can Switch Language from Chinese to English (selectable, dont worry). Now go to INSTALL, move to EXT_SDCARD as source and select the SuperSU ZIP -> INSTALL
the installation of SuperSU may show mounting/unmount errors, but will be installed anyway.
After Operation is done, reboot your Phone into normal Mode. You should find SuperSU installed on your device now.
Working Firmware Versions :
VIE-AL10C00B102*
VIE-AL10C00B106
VIE-AL10C00B163
If anything goes wrong, you may RESTORE your phone to TOTAL Stock by downloading
*VIE-AL10_C00B102 (initial CN nonspecific_Android 6.0_EMUI4.1) firmware - DOWNLOAD HERE (LINK will be added later)
Put the UPDATE.APP File (~2.8GB) (content of SDupdate_Package.tar.gz) in an folder named "dload" on your MicroSD Card and reboot phone with holding VOL UP and VOL DOWN. If the Huawei Logo appears, keep Buttons pressed until DEVICE gives you a vibration impulse. Device should now completly restore initial Firmware from SD-Card. PHONE IS LOCKED again after is operation.
****** i will add Firmware Files B102(initial full release), B106(update) and B163(latest update) LATER to this thread, need to Upload them first ******
Thanks. Can Xposed work on ?
Faisal Alro8y said:
Thanks. Can Xposed work on ?
Click to expand...
Click to collapse
I flashed the framework and installed apk but it still keeps telling me "framework not running"
I'll try later again
not sure but is anyone having an issue trying to link google contacts and google calendar to the phone?
Yes, I had some problems but exported them from the web and inported them back in to the phone
Sathelp said:
Yes, I had some problems but exported them from the web and inported them back in to the phone
Click to expand...
Click to collapse
how did u do that?? so u exported it from Google contacts den used their Computer software to upload it all back in?? back there is no backup made to google moving forward yeah??
anyone knows when the international ROM will be out? i heard some variants actually allow for Google accounts to sync with the phone.
Yes, exported from the web page on my PC and put the file on my phone, then opened contacts on the phone, selected inport from the menu and imported them from the file I cresated. I found no other way at the time other than moving them to your sim card on another phone, then use that sim on your P9+
Calendar and contact sync adapter work fine here, we installed the apks I posted in the mate thread...
Does this unlock also work with the International versions for example VIE-L29 ?
Could anyone test if FlashFire works?
Guys here real TWRP with decrypt option. Chinese TWRP ****. My sources are clear and free for every one
http://forum.xda-developers.com/p9-plus/development/recovery-twrp-t3388330
Anyone could you please backup oeminfo p9 plus AL10 and share ? Thanks
Sent from my HUAWEI NXT-L29 using Tapatalk
somboons said:
Anyone could you please backup oeminfo p9 plus AL10 and share ? Thanks
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Down Here:
Unzip to:
/storage/sdcard0/TWRP/BACKUPS/YOUR_SERIAL_NUMBER/2016-06-13--04-34-28_OEMinfo_A10/
Restore Backup with: TWRP
hi, i apologize for such a noob question, but i've never rooted a phone before so i'm wondering what are the benefits of rooting the Huawei P9 plus? i understand the basic gist of what rooting does and why you'd want it for phones with heavy, heavy bloat (like, say, a Samsung S5 from a US carrier). but the VIE-AL10 unit's bloatware can mostly be uninstalled (i have the china unlocked version), and with NiLS lockscreen, Nova Launcher, and the Android N theme that i got from this forum, i was able to get the phone running mostly like a normal, clean phone without any sign of those tacky Chinese bloat.
so i'm just wondering at this point what more can root do? what do you guys plan on doing, or have done, to your P9 plus after rooting?
thanks, and apologies again if this is a really dumb question for those experienced in this.
tested on L29.
Phone unlocks but I got stuck on Encryption unsuccessful loop. I did full format, but this removed the OS completely.
I have TWRP running though
Ok working unlocked rooted xposed.
Will rooting/unlocking the bootloader void the warranty or trigger some sort of counter that cannot be reset ?
How to turn phone into recovery after switching of the phone ? need to help my brother in abroad.
sam razzy said:
How to turn phone into recovery after switching of the phone ? need to help my brother in abroad.
Click to expand...
Click to collapse
Power plus volume up+ volume down.
Basically press all the buttons together.
who could help me to have the stock firmware for AL10 ?? Thanks
jvelasco said:
Down Here:
Unzip to:
/storage/sdcard0/TWRP/BACKUPS/YOUR_SERIAL_NUMBER/2016-06-13--04-34-28_OEMinfo_A10/
Restore Backup with: TWRP
Click to expand...
Click to collapse
Can you unpacke and upload only oeminfo ? I don't have P9 plus , I will add in my SRK Tool huawei.
[GUIDE] Huawei P10 Debrand/Rebrand/Update for Nougat&Oreo "Updated_19.5.2018"
Huawei P10 debrand/rebrand/update GUIDE
This thread will be discontinued, because Huawei refuses to provide unlock codes in the future, because of security reasons.
A shame that after the support end of the device it will be quite useless, cause you don´t get any security updates and have no chance to make secure again, by flashing something else.
I recommend you not buy any Huaweidevices in the future cause of that.
Disclaimer:
Before you do anything (stupid), backup your data!!!! Don´t make me or others responsible, i warned you!!!!!
If you wan´t to go back to your orginial version some day, you have to backup your OEMinfo!!! Best way to that is via TWRP before the rebranding ( see details of STEP 1)
When using the follwing script, take your time and drink a cup of coffee/tea!!!! First rule, don´t panic!!! Don´t do any (unnecessary) extra steps, while using the script!!!
Be aware that the phone sometimes takes longer for a step to finish, or you get stuck on a certain procedure (maybe depending on your branding). Key is to what to do at this point e.g. how to boot manually into fastboot.
If for some reason you must restart the procedure and factory reset appeared for the step, remember to look for the debugsettings and other mandatory settings.
Please use the orginal cable that came with the device for the rebranding and not some cheap aftermarket stuff. Also make sure you USB-Port has enough power (Might be the case on some notebooks)
70% of the posts/questions here are answered, if you read the gude carefully. So do you´re job and read!!!! Yes, i know it´s a lot to read, but details will maybe save your a**
Make sure you removed security pin from the device and also remove the google-account from the device itself, so you are not triggering googlesecuritysystem on nougat or oreo.
If you have a carrier version of the singleSIM P10 (VTR-L09xxxx) and you want rebrand or debrand it, you have to use the firmware for DualSIM (VTR-L29xxxx), or you SIM won´t be recognized anymore!
The good thing is, after that, you´ll be able to use both SIM or SIM and microSD. The provided HWOTA rom is mainly for the L29. If you want the L09 you have to replace the "update_all_hw.zip" in the update folder. If you not sure how to get, take a look in the Huawei-Forums
From Oreo to Oreo:
1. Download: @AndroidFilehost: HWOTA8_P10_B369a (Oreo) (MD5-Hash: fd330a74d22d2ef55a02bfcfdcea33ee )
All important files are inside this package!!
2. The steps for the this procedure are described here:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
From Nougat To Oreo (or Nougat to Nougat, if you use the older files):
STEP 1 (optional steps for the oeminfo backup are cursive)
1. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!)
The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
If you already unlocked your bootloader with installed twrp you can go to step 2. You don´t have to install TWRP in the following miniguide. the script installs it automatically.
But if you want to backup your system or the OEMinfo you have to do this step.
1. Request an unlock code: https://docs.google.com/forms/d/e/1FAIpQLSeGwoQ44zqykuTfjCQrVP07JOHBYnBcAxAbz9SAVxPTFqMh9g/viewform or contact Huawei via live chat on their site.
It may take some time till you get the code. Hopefully they revamp their old unlocksite in the future, cause using a googleform seems to be temporary solutions anyways.
I also found a nice handy tool, but haven´t testet it yet on the p10 and officially it isn´t yet supported (for now only P20): https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711 If can prove that it´s working for the P10 just leave a comment in the thread here or in the orginal thread.
2 Download Hisuite and install: HiSuite
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. Install the ADB Minimal Installer or ADB and Fastboot for Mac and then restart if you already have the driver installed then skip this step.
5. Download TWRP for the P10
6. Now go to ADB and Fastboot installation directory open ADB folder and open the command window as an administrator
7. Connect your phone to PC and reboot the device into fastboot mode by typing “adb reboot bootloader”.
8. Type “fastboot devices” in command prompt and hit enter, it gives you serial numbers in return means your phone connected properly.
10. To unlock bootloader, type fastboot oem unlock yourunlockkey. Here replace unlock key with the key you got. For example “fastboot oem unlock 1234567890″.
11. If you want TWRP at this point you have to copy the downloaded twrp.img-file into the adb directory and type fastboot flash recovery twrpimage.img If you already have oreo running on your device, you must use this updatepackage and follow the guide <.--instead of twrpimage.img type in the exact filename you´ve downloaded.
12. To restart the system type “fastboot reboot”
13. Boot into TWRP and make a Backup of the "OEMinfo" and/or the system. You should be able to that without any guide, otherwise it´s a big mistake keep reading and following this guide!!!
STEP 2
1. Depending on your variant (You can check with the app firmwarefinder and imei, if the update is approved) use:
@AndroidFilehost: HWOTA_P10_B369a (Oreo) (MD5-Hash: b935a84180565fb1717a46d7337f2d43 )
@AndroidFilehost: HWOTA_P10_B365 (Oreo) (MD5-Hash: dbcd30e157625fc6d709b26d49421bb6 )
@MegaUpload: HWOTA_P10_B360 (Oreo) (MD5-Hash: E75DCD3950517E517865878DF8F21679 )
Be aware, it takes some modifications to the script if you wan´t to rollback to nougat. You´ll find guides here on xda for that. So really be sure if you want the new oreo version.
Also you bootloader may stay unlocked after using the script to update to oreo. You have to relock it manually. Boot in fastboot mode and use: fastboot relock INSERTYOURUNLOCKKEYHERE. After relocking your device will once again do a factory reset.
@MegaUpload: HWOTA_P10_B180 (Nougat) (MD5-Hash: 7E11EE56E83AB98DA4DE03273A6A7633 )
@MegaUpload: HWOTA_P10_B179 (Nougat) (MD5-Hash: 7D133B7484E7B4AABA84BA1284D148EC )
some older versions of the hwota:
@MegaUpload: HWOTA_P10_B164
@MegaUpload: HWOTA_P10_B130
and extract it on your PC or your device SD Card. I recommend using 7zip.
2. Run the update.bat file from a preopended CMD with adminrights, It will ask you if you copied the files. Press any key to continue.
3. Now connect your device and Reboot into Bootloader mode using “Volume Down + Power” or just use “adb reboot bootloader” then press any key.
4. The above step will install TWRP in your device.
5. Now Disconnect USB Cable and turn off your device and use “Volume Up + Power” to enter TWRP.
6. Once you’re in TWRP mode, plug in the USB cable again and press the Enter key on your computer.
7. If your files are saved in the HWOTA folder on the SD card, type 1 and press ENTER and if files are saved in the HWOTA/Update folder on your PC, type 2 and press ENTER. I recommend using the sdcard, cause you avoid problems with cheap cables, driverproblems, etc. Make sure you sdcard is fully working and has no errors.
8. It’ll ask you the update type, again type 1 and press the Enter button twice.
9 Done! Be patient an let it do it thing.
10. If you have any problems booting, i recommend doing an low-level factory reset after.
11. Run the update.bat file as an administrator, It will ask you if you copied the files. Press any key to continue.
12. Now connect your device and Reboot into Bootloader mode using “Volume Down + Power” or just use “adb reboot bootloader” then press any key.
13. The above step will install TWRP in your device.
14. Now Disconnect USB Cable and turn off your device and use “Volume Up + Power” to enter TWRP.
15. Once you’re in TWRP mode, plug in the USB cable again and press the Enter key on your computer.
16. If your files are saved in the HWOTA folder on the SD card, type 1 and press ENTER and if files are saved in the HWOTA/Update folder on your PC, type 2 and press ENTER. I recommend using the harddrive of the pc
17. It’ll ask you the update type, again type 1 and press the Enter button twice.
18. Done! Be patient an let it do it´s thing.
19. If you have any problems booting, i recommend doing an low-level factory reset after.
20. If you are rebranding your device with this method, you have to do the whole "STEP 2" again in order to flash the new system files correctly. Also sometimes the device gets stuck on installing the new system after pushing the big updatefiles via adb. Wait 10min and if nothings happens you have to longpress the power key in order to complete.
21. After the new firmwarefiles have been pushed the device will make a factory reset, if it fails, restart the device while pressing Power+Volume up and factory reset the device from the orginal recovery. If enter TWRP at this point, something went wrong.
After that, you´ll be able to get updates directly from huawei via systemupdate or use the awesome firmware finder from the playstore.
If you wondering how to use the firmware finder, watch this guide and do it step by step: Firmware Finder Tutorial If you don´t want to rebrand/debrand this maybe enough for you!
STEP 3 (Optional Update Method 1)
If you have already unlocked your bootloader und installed TWRP, you can also use this method to install the new system update (Don´t try it if you are running oreo or wan´t to install it!! There is no stable und fully functioning version of TWRP for Oreo yet!!!):
1. Make a complete backup of your current system via twrp and save the backup to sd or your pc.
2. Download one of the Huawei P10_HWOTA files from above, save it on your device and unzip it
3. Navigate to the update folder in the HWOTA-folder and copy the 3 files to your device (sdcard recommended)
4. Now Boot your device into TWRP
5. In TWRP flash "update.zip" and don´t reboot!!!
6. Flash "update_all_hw.zip" and don´t reboot!!!
7. Flash "update_data_public.zip"
6. Wait until all files are flashed
7. Done! Reboot TWRP
STEP 4 (Optional Update Method 2):
1. download and install Firmware Finder
2. start the app and search for the exact model you want to update for example VTR-L29C432
3. Look for an FullOTA package and check with your IMEI if the device is approved, otherwise it won´t install cause huawei hasn´t signed the update for your device (IMEI) yet.
3. hit the button "inapp proxy" and setup the proxy with localhost and port 8080 in your phone´s wifi settings.
4. check for the update in systemupdate-app from huawei on your phone, start the update and pause it quickly (at 1-3%).
5. delete the proxy in your wifi settings.
6. resume the update
7. After successful download your device will reboot and install the update
If it fails there actually 3 reasons:
1. your Wifi is crap
2. you didn´t do the steps correctly
3. the firmware isn´t approved for your device, so be sure to check with imei before
(Maybe) Useful Links:
Team MT
Team MT Firmware Database for VTR-L29C432
New Huawei Multi Tool from TeamMT (Be sure to check it out, it´ll soon support the P10)
Guide for firmware finder (made by Firicel69)
OEMInfo Collections
My Other P10 Plus Thread
[TOOL] TOOL ALL IN ONE (No P10 Support yet, but you can request it)
Tips:
Pressing Power + Volume Down will launch the Fastboot Mode
Pressing Power + Volume Up will launch the Recovery Mode
Pressing Power + Volume Down with connected USB will launch the Fastboot Mode in forcemode (might useful if you can´t boot to the bootloader)
Pressing Power + Volume Down+Up will launch the forced firmwareupdate if you have the suitable updatefiles on your sdcard in a folder named "dload"
Turning your phone off and then pressing Volume Down while pluging in your USB-Cable will launch the Fastboot Mode
This whole thing was only possible because of the hard work of other heros here on xda!!
Mainly its based on the method from mankindtw [Guide] Mate 9 Flash Update Package and Rebrand
Big THX to mankindtw for the script!! Please send him some money, if you can!
Thanks a lot.
I plan to use your method.
Can I change the Chinese version (VTR-AL00) to VTR-L29 version in this way?
sangsaby said:
Thanks a lot.
I plan to use your method.
Can I change the Chinese version (VTR-AL00) to VTR-L29 version in this way?
Click to expand...
Click to collapse
I´m not 100% sure, but in my opionion your VTR-AL00 (should be the china version with playstore) has exactly the same hardware as the VTR-L29. Be sure to backup you system or at least only your oeminfo.
In case you rebranding doesn´t function you can revert back to your orginal version via TWRP. Maybe you should try the 636 instead of the 432, depending on your location.
sangsaby said:
Thanks a lot.
I plan to use your method.
Can I change the Chinese version (VTR-AL00) to VTR-L29 version in this way?
Click to expand...
Click to collapse
Hi, i would like to rebrand to VTR-AL00, can you please send me the oem info of vtr-AL00?
Thank you
yangsong2000 said:
Hi, i would like to rebrand to VTR-AL00, can you please send me the oem info of vtr-AL00?
Thank you
Click to expand...
Click to collapse
Really sure, think about it twice, most people want rebrand their phone to L09 or L29. I makes no sense to rebrand to VTR-L00, the only advantage i see, is that you get updates earlier, but in fact the other variants get really often updates too.
People with VTR-L00 bought their device cheap in china and want to rebrand because of the missing playstore, or thr missing LTE bands.
Here you can see the differences between the variants:
http://consumer.huawei.com/en/phones/p10/specs/
I´m sorry i can´t provide yoo a oeminfo for the VTR-L00.
LwannaCM said:
Really sure, think about it twice, most people want rebrand their phone to L09 or L29. I makes no sense to rebrand to VTR-L00, the only advantage i see, is that you get updates earlier, but in fact the other variants get really often updates too.
People with VTR-L00 bought their device cheap in china and want to rebrand because of the missing playstore, or thr missing LTE bands.
Here you can see the differences between the variants:
http://consumer.huawei.com/en/phones/p10/specs/
I´m sorry i can´t provide yoo a oeminfo for the VTR-L00.
Click to expand...
Click to collapse
Actually in VTR-AL00 you have more features and the updates are faster. Moreover, you can install play store
By the way in case I don't like it, I can go back to European version. But at the moment I want to try VTR-AL00!
Do you know where I can download it or do you know someone who has it?
Thank you
Good day.. i am using this method.. i have one question..
what is this firmware provided?? HWOTA_P10_B164.zip
is it VTR-L29C432 or C636??
thanks!
francisac3 said:
good day.. I am using this method.. I have one question..
What is this firmware provided?? Hwota_p10_b164.zip
is it vtr-l29c432 or c636??
Thanks!
Click to expand...
Click to collapse
vtr-l29c432
Be sure to stick exactly to the steps! After its finished wait at least 15min.
If the device won´t reboot itself, you have to switch it off and maybe make a low level reset via orginal recovery, if you´re stuck in a boot loop.
Happened to me on 1 of 5 flashes.
yangsong2000 said:
Actually in VTR-AL00 you have more features and the updates are faster. Moreover, you can install play store
By the way in case I don't like it, I can go back to European version. But at the moment I want to try VTR-AL00!
Do you know where I can download it or do you know someone who has it?
Thank you
Click to expand...
Click to collapse
Sorry, i couldn´t find a oeminfo for the VTR-AL00
LwannaCM said:
vtr-l29c432
Be sure to stick exactly to the steps! After its finished wait at least 15min.
If the device won´t reboot itself, you have to switch it off and maybe make a low level reset via orginal recovery, if you´re stuck in a boot loop.
Happened to me on 1 of 5 flashes.
Click to expand...
Click to collapse
thanks.. will try this on my vtr-tl00 chinese version.. downloading the file now
Rebrand p10
Hi I have VTR-L29C738B150. It is brand Polish mobile Polkomtel. I want to change to open Europe software. I try to do this like in this post but nothing happened after I am in TWRP and click enter. Please help me.
what happened to the update.bat?? i cant use this.. when i open the update.bat... it only pops up then immediately close
DiMeteo24 said:
Hi I have VTR-L29C738B150. It is brand Polish mobile Polkomtel. I want to change to open Europe software. I try to do this like in this post but nothing happened after I am in TWRP and click enter. Please help me.
Click to expand...
Click to collapse
Maybe you forgot to unplug the cable. Just repeat the steps to this point. If you however get stuck, try to flash a custom rom for the p10 from this section, at least you get your device working again.
Maybe you find a solution here: [Guide] Mate 9 Flash Update Package and Rebrand it´s the same batch from mankindtw, only with files for the p10.
francisac3 said:
what happened to the update.bat?? i cant use this.. when i open the update.bat... it only pops up then immediately close
Click to expand...
Click to collapse
Maybe the update.bat hates you, just kiddin Open a CMD as admin run the update.bat from there. What you describe is a common problem and relates to a lot of other batchfiles
Rebrand P10
LwannaCM said:
Maybe you forgot to unplug the cable. Just repeat the steps to this point. If you however get stuck, try to flash a custom rom for the p10 from this section, at least you get your device working again.
Maybe you find a solution here: [Guide] Mate 9 Flash Update Package and Rebrand it´s the same batch from mankindtw, only with files for the p10.
Click to expand...
Click to collapse
I do all like You say. But I have a problem (I can't do backup in TWRP and while I install TWRP on the end there is a error). Maybe I shoud set something in developer option?
DiMeteo24 said:
I do all like You say. But I have a problem (I can't do backup in TWRP and while I install TWRP on the end there is a error). Maybe I shoud set something in developer option?
Click to expand...
Click to collapse
Please read again everything in Step 1, there lies your answer how to get your TWRP and what to activate in developersettings. This step has nothing to do with the update.bat and is absolutely crucial and mandatory.
After installing TWRP the official way, make a backup and continue.
Rebrand P10
LwannaCM said:
Please read again everything in Step 1, there lies your answer how to get your TWRP and what to activate in developersettings. This step has nothing to do with the update.bat and is absolutely crucial and mandatory.
After installing TWRP the official way, make a backup and continue.
Click to expand...
Click to collapse
I will show you where is the problem.
when I boot in fastboot I see something like this:
replace recovery to TVRP
target reported........
sending recovery........
OKEY
writing recovery.....
FAILED <remote:Command not allowed>
finished
after this I do all with volume up+power and nothing happened
DiMeteo24 said:
I will show you where is the problem.
when I boot in fastboot I see something like this:
replace recovery to TVRP
target reported........
sending recovery........
OKEY
writing recovery.....
FAILED <remote:Command not allowed>
finished
after this I do all with volume up+power and nothing happened
Click to expand...
Click to collapse
O.K. now i understand, did you set OEM-Unlocking in Developer Options? It seems like you have a locked FRP and your device doesn´t allow flashing the custom recovery.
Someone already had this problem on the Mate 9:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page56
LwannaCM said:
O.K. now i understand, did you set OEM-Unlocking in Developer Options? It seems like you have a locked FRP and your device doesn´t allow flashing the custom recovery.
Someone already had this problem on the Mate 9:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page56
Click to expand...
Click to collapse
I have FRP lock but I cant set OEM unlocking in developer option because it is grey (non active)
DiMeteo24 said:
I have FRP lock but I cant set OEM unlocking in developer option because it is grey (non active)
Click to expand...
Click to collapse
K, now we are talking. Only thing you can do is flash your rom back to stock the semi-official way:
Download the firmware finder from the playstore.
Search for your device (not the one you want rebrand to) and check with IMEI in Firmware Finder just to be sure. Here you have a guide: Firmware Finder Tutorial
If you prefer reading, you can also follow this: https://forum.xda-developers.com/p10/how-to/guide-update-p10-via-firmware-finder-app-t3674477
Then you should be back to normal. When it´s finished you can try again, just be really sure following the steps and do no extra steps!! ....for Instance wiping something after you installed TWRP
You can try the dload method instead, but i recommend doing it via firmwarefinder, simply cause it will work.
Hi community.
I have SM-A115F/DSN (Galaxy A11) running Android-10.
Can I root it and, if so, how?
Maybe someone has already rooted the same device.
I am a beginner and I need a complete step-by-step method. Thank you in advance.
Ivan-F. said:
Hi community.
I have SM-A115F/DSN (Galaxy A11) running Android-10.
Can I root it and, if so, how?
Maybe someone has already rooted the same device.
I am a beginner and I need a complete step-by-step method. Thank you in advance.
Click to expand...
Click to collapse
Hi,
You can root "any" device with a thorough Google search.
Here what I found :
https://magiskupdate.com/root-samsung-galaxy-a11/
Raiz said:
Hi,
You can root "any" device with a thorough Google search.
Here what I found :
Click to expand...
Click to collapse
Thanks for your answer. Yep, I have seen this site. I even left a comment there that instruction contains a broken link. You can use your mouse wheel (if using desktop) or swipe down (if using smartphone) to scroll down to see comments there. They fixed the issue, but they still have instructions that does not work. I apologize for mistrusting your link, but I am afraid to follow the incorrect instructions on this site. Since people say that this can lead to the fact that the phone stops working at all. No offense.
Ivan-F. said:
Thanks for your answer. Yep, I have seen this site. I even left a comment there that instruction contains a broken link. You can use your mouse wheel (if using desktop) or swipe down (if using smartphone) to scroll down to see comments there. They fixed the issue, but they still have instructions that does not work. I apologize for mistrusting your link, but I am afraid to follow the incorrect instructions on this site. Since people say that this can lead to the fact that the phone stops working at all. No offense.
Click to expand...
Click to collapse
Hello mate. I have the SM-A115F. Here's my guide how to get ROOT with Magisk!!!!!!!!!!
I'm aware you that you will loose all your data on your phone because you need to unlock bootloader.
If you're assept with that prepare for root
BE CARE FULL I'M RUSSIAN AND WORK WITH RUSSIAN VERSION OF FIRMWARE, SOME STRINGS MAY BE DIFFERENT. I TRY MY BEST TO TRANSLATE 'EM CORRECTLY, BUT NEVERTHELESS!!!!!!
You must do it with follow steps:
a) Preparig^
You need to get this software:
1. ADB and Fastboot.
2. Odin.
3. Fresh firmware (I'd used SamFirm, also it's required to install Visual C++ Redist: 2008, 2012, 2015 (x86 & x64))
4. Magisk Manager (APK)
-----------------------------------------
First steps:
a) Make phone backup!
b) Remove all google accounts!!!!!!!!!
c) Enable Developer Settings menu: Settings -> About phone -> Build Number (click over that menu 8 times and enter your password)
d) Navigate to Developer Settings -> Enable OEM Unlock and also Enable ADB (Enable Debuging)
e) TURN OFF YOUR PHONE and then wait for 5 - 8 seconds.
----------------------------------------
Unlocking Bootloader:
a) Plug your ORIGINAL USB THAT COMES WITH BOX OF YOUR PHONE to PC and NOT TO PHONE.
b) When you'll be ready: Press and hold Volume + and Volume - buttons AND PLUG USB (still hold volumes butttons).
c) after 2 or 3 seconds you'll see a blue screen where 1st position log press Volume + for unlocking -> Make it so!
d) you had long press Volume +, now system ask a comfirmation Perss Power Button.
e) When you've done you'll get clean and not vergin android phone with unlocked bootloader!
f) Make a first setup of your phone. When you've done repeat unlocking of Developer Settings and check slider of OEM Unlock IT MUST BE GRAY if so you really had unlocked your phone. If not you're failed!
----------------------------------------
Get Root:
Required:
1. Odin
2. SamFirm and Visual C++ Redist: 2008, 2012, 2015 (x86 & x64)
3. ADB
4. 7-ZIp Archive manager
a) Start SamFirm. settings up application by typing: Model: "SM-A115F" and regian (in my case "SER" = Russia, all data not required a double quotes AND checkout that checkbox "Auto" is selected)
b) After presetin' begin of downloadin' and decrypting of fiemware (you'll get a archive)
c) In firmware archive we must find file with prefix "AP_".
d) Open it with 7-Zip
e) We must extract from there a file "boot.img.lz4"
f) Now We must pack that file into .tar archive. As result we'll get "boot.img.lz4.tar"
g) Install on your phone Magisk Manager and enable WiFi!!!!!!
h) Drop into Phone Memory -> Download folder your "boot.img.lz4.tar"
i) Open Magisk Manager -> Install Magisk -> Patch your kernel manualy -> navigate to your "boot.img.lz4.tar" file and select it!
j) Whne you've done, open on your PC your Phone -> Download folder and get from there archive: "Magisk_Patched.tar"
k) UNplug from PC your pfone and turn it off!
l) Run Odin AND IN OPTIONS TAB UNSELECT CHECKBOX "Auto Reboot"
m) Flash your file "Magisk_Patched.tar" as AP File in Odin 9For that you must turn off your prone, wait for 6 seconds, then press Volume + and Volume - buttons and at the same time plug USB from your PC. Whn you'll see blue screen, make a click over Volume + button and your in Downloading Mode!
n) Flash with Odin. If you have PASS status then you've done and press and hold for 8 seconds Volume - and POWER buttons. if you have bootloop or ERR! the you failed!!!!!
o) Now you must get in Recovery mode: Power and Volume + and in recovery make: Factory reset + Clear Cash partition.
p) When you've done Just install again your Magisk Manager and it may ask you an adition install ACCEP THAT and after reboot you'll get a rooted phone,
BUT YOU CAN'T REMOVE OR MAKE ANY CHANGES WITH /system partiton, beacuse / is mounted as READ-ONLY!
No wiping during process
I already backed up everything but I don't want to wipe my storage. Losing data by accident is one thing but when it is part of the process I just can't do it.
So how do I root my a11 samsung galaxy without losing data and obviously bricking the device?
Feel free to email me.
I also don't have access to a pc currently but may buy one in the coming weeks.
---------- Post added at 05:22 AM ---------- Previous post was at 05:19 AM ----------
Bootloader wipes the storage for some reason. How do I prevent this and still root my device?
The thought of a wiped drive/phone almost triggers a panic attack even if everything that I want is backed up.
@Ulrika8
You don't need to unlock phone's boot-loader etc.pp in order to root its Android. Look inside here.
jwoegerbauer said:
@Ulrika8
You don't need to unlock phone's boot-loader etc.pp in order to root its Android. Look inside here.
Click to expand...
Click to collapse
Actually that won't work for me because I have android 10. Samsung Galaxy a11. Also how can I upload a screenshot of my device information?
Is there a number I can call for technical support in regards to rooting. I am in California USA.
griha41 said:
3. Fresh firmware (I'd used SamFirm, also it's required to install Visual C++ Redist: 2008, 2012, 2015 (x86 & x64))
Click to expand...
Click to collapse
Hey man, thank you for Your post. What is SamFirm, is it from here https://samfirmtool.com/ ?
Ivan-F. said:
Hey man, thank you for Your post. What is SamFirm, is it from here https://samfirmtool.com/ ?
Click to expand...
Click to collapse
I suggest you to use this site: https://samfirmtool.com/category/tool
Here link to developer xda-account (for prooves) https://forum.xda-developers.com/member.php?u=3975929
griha41 said:
a) Start SamFirm. settings up application by typing: Model: "SM-A115F" and regian (in my case "SER" = Russia, all data not required a double quotes AND checkout that checkbox "Auto" is selected)
b) After presetin' begin of downloadin' and decrypting of fiemware (you'll get a archive)
c) In firmware archive we must find file with prefix "AP_".
d) Open it with 7-Zip
e) We must extract from there a file "boot.img.lz4"
f) Now We must pack that file into .tar archive. As result we'll get "boot.img.lz4.tar"
g) Install on your phone Magisk Manager and enable WiFi!!!!!!
h) Drop into Phone Memory -> Download folder your "boot.img.lz4.tar"
i) Open Magisk Manager -> Install Magisk -> Patch your kernel manualy -> navigate to your "boot.img.lz4.tar" file and select it!
j) Whne you've done, open on your PC your Phone -> Download folder and get from there archive: "Magisk_Patched.tar"
k) UNplug from PC your pfone and turn it off!
l) Run Odin AND IN OPTIONS TAB UNSELECT CHECKBOX "Auto Reboot"
m) Flash your file "Magisk_Patched.tar" as AP File in Odin 9For that you must turn off your prone, wait for 6 seconds, then press Volume + and Volume - buttons and at the same time plug USB from your PC. Whn you'll see blue screen, make a click over Volume + button and your in Downloading Mode!
n) Flash with Odin. If you have PASS status then you've done and press and hold for 8 seconds Volume - and POWER buttons. if you have bootloop or ERR! the you failed!!!!!
o) Now you must get in Recovery mode: Power and Volume + and in recovery make: Factory reset + Clear Cash partition.
p) When you've done Just install again your Magisk Manager and it may ask you an adition install ACCEP THAT and after reboot you'll get a rooted phone,
BUT YOU CAN'T REMOVE OR MAKE ANY CHANGES WITH /system partiton, beacuse / is mounted as READ-ONLY!
Click to expand...
Click to collapse
Thanks. This worked fine on my Samsung A115u1 = full root access achieved...
(if only I had noticed there was no NFC on this.. useless phone for me... lol now I gotta go buy another)
griha41 said:
Hello mate. I have the SM-A115F. Here's my guide how to get ROOT with Magisk!!!!!!!!!!
I'm aware you that you will loose all your data on your phone because you need to unlock bootloader.
If you're assept with that prepare for root
BE CARE FULL I'M RUSSIAN AND WORK WITH RUSSIAN VERSION OF FIRMWARE, SOME STRINGS MAY BE DIFFERENT. I TRY MY BEST TO TRANSLATE 'EM CORRECTLY, BUT NEVERTHELESS!!!!!!
You must do it with follow steps:
a) Preparig^
You need to get this software:
1. ADB and Fastboot.
2. Odin.
3. Fresh firmware (I'd used SamFirm, also it's required to install Visual C++ Redist: 2008, 2012, 2015 (x86 & x64))
4. Magisk Manager (APK)
-----------------------------------------
First steps:
a) Make phone backup!
b) Remove all google accounts!!!!!!!!!
c) Enable Developer Settings menu: Settings -> About phone -> Build Number (click over that menu 8 times and enter your password)
d) Navigate to Developer Settings -> Enable OEM Unlock and also Enable ADB (Enable Debuging)
e) TURN OFF YOUR PHONE and then wait for 5 - 8 seconds.
----------------------------------------
Unlocking Bootloader:
a) Plug your ORIGINAL USB THAT COMES WITH BOX OF YOUR PHONE to PC and NOT TO PHONE.
b) When you'll be ready: Press and hold Volume + and Volume - buttons AND PLUG USB (still hold volumes butttons).
c) after 2 or 3 seconds you'll see a blue screen where 1st position log press Volume + for unlocking -> Make it so!
d) you had long press Volume +, now system ask a comfirmation Perss Power Button.
e) When you've done you'll get clean and not vergin android phone with unlocked bootloader!
f) Make a first setup of your phone. When you've done repeat unlocking of Developer Settings and check slider of OEM Unlock IT MUST BE GRAY if so you really had unlocked your phone. If not you're failed!
----------------------------------------
Get Root:
Required:
1. Odin
2. SamFirm and Visual C++ Redist: 2008, 2012, 2015 (x86 & x64)
3. ADB
4. 7-ZIp Archive manager
a) Start SamFirm. settings up application by typing: Model: "SM-A115F" and regian (in my case "SER" = Russia, all data not required a double quotes AND checkout that checkbox "Auto" is selected)
b) After presetin' begin of downloadin' and decrypting of fiemware (you'll get a archive)
c) In firmware archive we must find file with prefix "AP_".
d) Open it with 7-Zip
e) We must extract from there a file "boot.img.lz4"
f) Now We must pack that file into .tar archive. As result we'll get "boot.img.lz4.tar"
g) Install on your phone Magisk Manager and enable WiFi!!!!!!
h) Drop into Phone Memory -> Download folder your "boot.img.lz4.tar"
i) Open Magisk Manager -> Install Magisk -> Patch your kernel manualy -> navigate to your "boot.img.lz4.tar" file and select it!
j) Whne you've done, open on your PC your Phone -> Download folder and get from there archive: "Magisk_Patched.tar"
k) UNplug from PC your pfone and turn it off!
l) Run Odin AND IN OPTIONS TAB UNSELECT CHECKBOX "Auto Reboot"
m) Flash your file "Magisk_Patched.tar" as AP File in Odin 9For that you must turn off your prone, wait for 6 seconds, then press Volume + and Volume - buttons and at the same time plug USB from your PC. Whn you'll see blue screen, make a click over Volume + button and your in Downloading Mode!
n) Flash with Odin. If you have PASS status then you've done and press and hold for 8 seconds Volume - and POWER buttons. if you have bootloop or ERR! the you failed!!!!!
o) Now you must get in Recovery mode: Power and Volume + and in recovery make: Factory reset + Clear Cash partition.
p) When you've done Just install again your Magisk Manager and it may ask you an adition install ACCEP THAT and after reboot you'll get a rooted phone,
BUT YOU CAN'T REMOVE OR MAKE ANY CHANGES WITH /system partiton, beacuse / is mounted as READ-ONLY!
Click to expand...
Click to collapse
Will this work on SM-A115F/DS Android 11 and oneui 3.1
macleo said:
Will this work on SM-A115F/DS Android 11 and oneui 3.1
Click to expand...
Click to collapse
Also had the same question. Did you manage to root yours? NB: On Android 11
A11 on Android 11. Have tried every method online and for the life of me can not root my A11 without getting boot loops nor can I successfully flash TWRP..
Any tips...
Hi there,
I haven't found much information regarding the Canadian variant of the A52 5G yet, sorry.
I'd assume that the Canadian bootloader is already unlocked to begin with (Carrier is Koodo. I know my older Koodo Galaxy S4 I337 was never locked as well) ? I do not see the OEM Unlock option, even when I bump the date by 7 days from now on.
This would mean that I could simply proceed and patch the boot to install Magisk? Has anyone succeeded yet on the Canadian variant?
Thank you, appreciated,
Ryola said:
This will erase your phone's data so backup first
This will trip knox and prevent alot of samsung apps working
Unlocking Bootloader
1. Enable OEM unlocking in developer options
2. Turn phone off
3. Plug a usb into pc but not phone
4. Hold vol up and down and plug usb into phone
5. Wait for green screen and follow instructions to unlock bootloader (as follows)
5.5. Long press vol up on green screen then press vol up again
Installing magisk
1. Download your firmware from the internet
2. Extract the AP tar.md5 file
3. Place file on root of phone
4. Download and install Magisk (I used Canary)
5. Make sure connected to internet
6. Open Magisk and press the top install (Manager not the app install)
7. Select Install > Select and Patch a File and select the AP file you put on the phone
8. Wait for it to patch and create a new file
9. Find the new file, usually called magisk_patched in your downloads folder, but Magisk would have said what and where on the patching screen when done
10. In Odin flash this new AP file
11. If needed reinstall Magisk app, open it and let it update
To get saftey net to pass I had to use The universal saftey net magisk module found somewhere on this site. I can find it later if needed
Those are the steps I did, hope it helps
Click to expand...
Click to collapse
EDIT: Seems like I'm mistaken and I need to pay and unlock anyway I believe: https://forum.xda-developers.com/t/...unlock-for-samsung-us-canada-devices.4215101/
Hey Guy's let's help me how I can root my Samsung Galaxy A03s and how i can find the image of twrp in my phone.
Download Platform ADB & Fastboot.
Download The Latest Odin tool.
Download 7-Zip
Download "Bifrost" on your phone.
Download The Stock ROM of your SM-A037F using the Bifrost (make sure to know your device's Model & Region-Specific CSC).
Backup User Data (as your Phone will have to be reset... Multiple times)
... Now...
Step1: Decrypt the Stock ROM you downloaded with Bifrost in the Decrypt section of Bifrost.
Step2 : Move the firmware to your PC, keep two copies.
(p.s.: leave only the "AP" file on your phone.)
One copy will be the stock firmware backup incase of any mishaps.
The second copy of the firmware; Change the file extensions of all the extracted files to ".tar" with 7-Zip.
Step3 : On your phone, Using The latest Magisk APK, patch the entire "AP" file (should be about 5GB give it some time to work.). It will now be renamed by Magisk to something else.
Step4 : Move the patched "AP" to your PC. Then lauch Odin and input all the files in the following order;
BL. - Stock BL.
AP. - MAGISK-Patched AP.
CP. - Stock CP.
CSC. - Stock CSC. (DO NOT USE "HOME CSC").
Go to "Option" tab and Untick "Auto Reboot".
Step5 : Go to "Developer Settings" on your phone and enable OEM Unlocking.
Step6 : Plug-In your phone to your PC
Step7 : Power off;
Long-press: Volume Up + Volume Down Simultaneously.
Step8 : Wait till you see a prompt to disable Device Bootloader by Holding Volume Up; Proceed with holding on Volume Up to unlock the device Bootloader.
Step9 : It will Rest your device's, so quickly Setup your phone, turn on your data connection or WiFi.
Head to the "Developer Settings" to confirm the status of your bootloader.
Repeat Step6 & Step7.
Step10 : Tap once on Volume Up to enter Download Mode and Click Start On the Odin tool on your PC to flash the Rooted Firmware on your Galaxy A037F.
Step11 : Wait for it to finish its Download and then hold Volume down and power button.
Step12 : After Booting up, Power Off and Long Press Volume Up and Power Button to enter Recovery Mode.
Step13 : Perform a Factory Reset. And Reboot
Step14 : Install Latest Magisk APK and
Done!
I need help too
on a Galaxy a03s sm-a037u the system is as follows.
Android 11 / R / API 30
Baseband Version: A037USQS2AVD3
Linux Kernel Version: 4.19.127-23960189
Http User Agent: Dalvik/2.1.0 (Linux; U; Android 11; SM-A037U Build/RP1A.200720.012) hardware model MT6765V/CB
Needing to unlock bootloader, Enabled developer options and no oem unlock toggle,ran adb commands got,
( ro.oem_unlock_supported "1")
( sys.oem_unlock_ allowed "0")
( ro.boot.flash.locked "1")
( ro.boot.vbmeta.device_state "locked")
( ro.boot.verifiedbootstate "green")
( ro.boot.verifymode "enforcing")
Tried running Flashboot command
Flashboot unlock oem,returned error code remote unknown command. Dies anyone know who to unlock bootloader and root this device?
This is a33 forum device not a03s.
Zillion said:
This is a33 forum device not a03s.
Click to expand...
Click to collapse
Yea that's obvious was just hoping some one could help
Actually its the a03 thread. Read the title up top D!ck
Goosemidtn said:
Actually its the a03 thread. Read the title up top D!ck
Click to expand...
Click to collapse
Some moderator moved it to "Android Q&A, Help & Troubleshooting", try to be nice with people.