hi guys,
I have an android box redroid pro (redline) , android based and with dvb II.
the problem is that I want to change the firmware (on stbsupport there is one but it doesnt match with usb burning tool)
And I have a notification on the screen every 30 min "the launcher is not compatible with your box) but I have changed nothing!
About the firmware on stbsupport, there is no XXXXx.img but system.new.dat files.
is there a way to put them on the box? it is not rooted, or juste disable this notification on the screen?? Thanks!
Related
Hello,
I have a T95N/T95X S905X P212 1GB/8GB Chinese box.
The newest stock firmware for it is "T95X Amlogic S905X 4K KODI 16.1 Preinstaled Android 6.0 TV BOX Firmware 20160921"
The "P212 MXQ Pro S905X T95X 1G Android TV Stripped" also work, and that's the one I'm currently using.
I've tried all LibreElec and CoreElec builds available for the S905X with all the DTB variants, putting them on the root of the stick and renaming to dtb.img as instructed, and they all have the same behavior: The boot logo (S905X logo) appears, then fades to black, then nothing.
I've left the box on for hours and nothing happens. The box doesn't connect itself to the network (Ethernet) so I can't ssh to it. I've tried to boot using 4 different SD cards and 5 different USB pendrives.
I did a cat /proc/device-tree/amlogic-dt-id to confirm which DTB the Android build was using and the result was:
gxl_p212_1g
But the corresponding dtb file from the repos doesn't work.
I dumped my dtb.img from the android firmware in the box using dd if=/dev/dtb | gzip > /storage/downloads/dtb.img.gz and tested the extracted dtb.img, and when I put it on the USB stick it freezes on the boot logo, it doesn't even fades to black.
I've tried splitting it, since it's a multi DTB. Using the individual ones I still get the frozen boot logo, doesn't even progress to the black screen like the others. I'm attaching the original dumped file and the split ones.
The latest ARMBian, "Armbian_5.37_S9xxx_Debian_stretch_3.14.29_icewm_20171226.img", works ok but it gives me a lot of emmc errors on boot. I'm attaching the DMESG log as well.
I've tried all the DTB's included on the ARMBian image on LibreELEC and Core but they all go the black screen route.
Thanks for the help!
our device is a ddr4 p212 and uses a different uboot file.. I think xtmod ex will work on it... im testing it now... I tried even the atvxperience 1gb ddr4 version and didnt work
I have Cherry V2 Pro Amlogic based device(red board CS_905w_tx_v1.2) I have figured out this is the fake copy of Tanix Tx3 mini, the board, the outer body, android version looks same as Tanix Tx3 mini, I need help to un-brick this device, I tried installing atvXperience through SDCard after completion of updating bar blue screen appears boot written on display of device I waited for some time and then remove the power cable after that is does not give any display only blue screen and red light on back of the device, I tried Amlogic USB Burning tool but after connecting and push start button it stops on 1% and give error, after that I tried many roms including TX mini one but no luck , Please suggest me solution to solve this problem. I am attaching pictures of device and current status.
This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
billyfreeman said:
This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
Click to expand...
Click to collapse
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
billyfreeman said:
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
Click to expand...
Click to collapse
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
aidanmacgregor said:
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
Click to expand...
Click to collapse
No doesn't work. Keep getting getinitial error
Mecool BB2 (not pro) 3/16 GB box. After uploading the firmware atvXperience_v2H_s912 i want to back to original firmwae and box stopped at the logo and that's it.
I performed the steps described on the net, and flash again with USB Burning Tool after reset pins on the PCB. Firmware flashing successful, without errors, but the box does not respond, the blue LED is on (optical too), screen is dark when connected to the tv with HDMI or AV cable. I have tried several different firmware moded and original and the effect is the same.
What's going on? Maybe someone know how to run it? I will be grateful for any help.
Hi , thought the bb2 was the 2gb model and the bb2 pro the 3gb . I installed slimbox rom for bb2 and bb2 pro and works well https://drive.google.com/drive/folders/1UxvVggW8eNJqrm20zuKbn6SRFUBbZ_RA?usp=sharing
If it doesn't work try going back to stock android 6 and upgrade but i think the 3gb you have may be a pro model . this may help you https://4pda.ru/forum/index.php?showtopic=764998
Help Required - android TV box is dead after flashing wrong
MEcool KII Pro s905d 2gb version Purchase in 2020
By mistake or lack of knowledge, I have flashed wrong rom, from then it is not booting on, only blue light is there, no desplay on screen, when powered on.
After that flashed different stock rom .img files from PC using USB, by pin shorting method.
USB tool shows flash is successful, but still there is no desplay, only blue light
Please suggest what can be done to get it working....
see attachment for more detail....