Related
So I think most of you already know about Google's strict update to their SafetyNet API, which is used by Android Pay, and Pokemon Go among other apps.
If you don't, SafetyNet is a protocol used by Google Play Services that returns whether your device has been "tampered with". Having Root Access, Xposed installed, or a custom ROM or Kernel, have been known to trip this check, which will prevent the apps that utilize SafetyNet's functionality from running on the device.
Several developers on XDA and in the rooting community have been working overtime in an attempt to find a loophole in SafetyNet's code - enter the likes of Magisk and SuHide, each of which no longer work to hide root from SafetyNet as of the date of this writing.
Now, my personal belief is that after a person has purchased an Android device (and in effect that copy of the device's software) they should be free to make any and all modifications they choose to it - at the risk of their own security of course. Additionally, with apps like Pokemon Go, which offer in-game purchases and then change user agreements through app updates which block potential users after they may have made these same in-game purchases, the argument could be made that the SafetyNet API is even promoting fraud.
It isn't my intention to convince anyone of my position, only understand it. At this time, I am trying to gain a better understanding of exactly what elements found on a device prompt SafetyNet to return that a device has been tampered with. I was once rooted, with Xposed installed, but have since uninstalled both, and even re-flashed stock firmware. Even still, the SafetyNet Helper App I have been using for research always returns a failure. For posterity, I am also unable to log into Pokemon Go on stock firmware with no root or Xposed.
If root access is enabled, I have found that the SafetyNet check itself (step 1) will fail and the app will present a red screen, whereas if root access is not installed, the SafetyNet check will pass, but the Device Signature Verification with Google (step 2) will fail, which results in an overall failure where apps like Android Pay and Pokemon Go are concerned. The most modern counter I have found to hide root from SafetyNet is found here but even it states that the device must be able to pass the SafetyNet check on its own before this modifies SuperUser can be installed, so I feel a bit stuck.
I haven't seen anyone address SafetyNet and the Xperia Z5 Compact in the same sentence, and so my question is, can the Z5C pass SafetyNet at all since its most recent update? Please, download the SafetyNet Helper App from the Play Store and run it on your Z5C. Let me know if you get a red screen (failure at first step) a blue screen (failure at second step) or a green screen (passing). Also tell me about your device, and any modifications you have made to it. Seeing as how I can no longer pass the SafetyNet check at all on newly flashed stock firmware, I worry that the Xperia Z5C may not have been given Google's "Device Signiture Verification" - like many other international Android devices.
And if anyone else can shed some light on this situation, I would be most grateful.
Blue screen error.
Krypton custom rom based on .253 with zach's kernel. xposed installed
Sent from my iPad using Tapatalk
What about downgrading Google Play Services? as far as i remember the Safetynet APi is included in this package. Don't know if it is server based or written inside the package, though.
Has anyone found a way to bypass SafetyNet for Nougat?
grayleshy said:
Has anyone found a way to bypass SafetyNet for Nougat?
Click to expand...
Click to collapse
I also want to know this, when running safetynet test it shows me a red screen, even though I already removed root and flashed stock firmware.
rolo143 said:
I also want to know this, when running safetynet test it shows me a red screen, even though I already removed root and flashed stock firmware.
Click to expand...
Click to collapse
because of unlocked bootloader
im using magisksu + magiskhide and its bypassing the safetynet
meistr91 said:
because of unlocked bootloader
Click to expand...
Click to collapse
There is a workaround?
meistr91 said:
because of unlocked bootloader
Click to expand...
Click to collapse
Can I relock it again?
https://forum.xda-developers.com/z5-compact/general/recovery-nougat-7-0-android-bootable-t3609358
rolo143 said:
Can I relock it again?
Click to expand...
Click to collapse
Magisk changes the properties and "relocks" it for you during the start up procedures.
--- previous post
NeoBeum said:
https://forum.xda-developers.com/z5-compact/general/recovery-nougat-7-0-android-bootable-t3609358
Magisk changes the properties and "relocks" it for you during the start up procedures.
Click to expand...
Click to collapse
But magisk requires root. I remove root because there are some games and apps that detect it. So I wanted to pass SafetyNet but still can't.
I have Magisk working, I'm just rebuilding the recovery project and fixing some stuff
Has one been able to patch libandroid to make suhide work on Nougat with security patches after October 2016?
I have CarbonROM 5.1 Moo installed on my Zperia Z5 compact. This along with Magisk 14.3. (And... yeah... As it seems, the Magisk module "Universal SafetyNet Fix" is also required in my case. )
With this, it all works fine. SafetyNet checks out as valid/okay. No problems.
Hello !
I want to apologize for my English from Google translation because I'm French ... Hope you understand ?
Yesterday I rooted my phone which is a Huawei P8 Lite Android 6.0 with Magisk.
So far so good.
I wanted Xposed installed so I started by installing Xposed Installer and then in Magisk I installed Xposed framework [SDK23] but restarting my phone I was stuck with the huawei logo ... ?
If anyone will have a solution I am a taker!
Thank you !
netyx62 said:
Hello !
I want to apologize for my English from Google translation because I'm French ... Hope you understand [emoji23]
Yesterday I rooted my phone which is a Huawei P8 Lite Android 6.0 with Magisk.
So far so good.
I wanted Xposed installed so I started by installing Xposed Installer and then in Magisk I installed Xposed framework [SDK23] but restarting my phone I was stuck with the huawei logo ... [emoji17]
If anyone will have a solution I am a taker!
Thank you !
Click to expand...
Click to collapse
I don't know your phone, but I can tell you that on mine I had to do the following:
1) Install the Xposed Installer.
2) Reboot.
3) Install correct SDK in Magisk.
4) Reboot.
5) Wait about 20 minutes for it to boot up.
It took that long on Step 4. But only once. After that, it booted up normally.
I recommend that you first install an app called "LiveBoot" (Grant it Root). It will replace your bootup logo with lines of text that are the commands that your phone normally processes when it boots up.
The advantage here, is that unlikr the logo, with LiveBoot you can see that the phone has not frozen (it may pause for 30 seconds now and then), as long as it's still processing commands.
You can uninstall LiveBoot after you're done, or leave it on.
I was being serious. The first time, it took my phone 20 to 30 minutes to boot. After that, it booted up as fast as it always did.
Good Luck!
Posted from my way cool LG V20 (H910) Nougat 7.0
Thank you for your advice I tried and actually I was not patient enough when restarting but i have another problem now, xposed tell me it is installed but not active .... Solution?
netyx62 said:
Thank you for your advice I tried and actually I was not patient enough when restarting but i have another problem now, xposed tell me it is installed but not active .... Solution?
Click to expand...
Click to collapse
netyx62,
It may just need another reboot. But first go into Magisk, look at the SDK Module and make sure the little box is checked.
Then go into the Xposed Installer app and go into the "Framework" section.
Is the switch on?
What color is the rectangle below the switch?
Also, important… Did you use the "Xposed Installer for Magisk"?
There is a different installer for when you have Magisk. It'll say "for Magisk".
*** If you did NOT use the right installer, then you'll need to get the right one and then follow the steps below.
First Google and Download;
"Xposed Installer for Magisk"
I think it's also v3.1.5 for Magisk too.
Then go into Magisk >> Modules and tap the little garbage can for the Framework Module, which will make it uninstall on the next reboot.
But before rebooting, Uninstall the Xposed Installer app.
Now Reboot.
Now start over, using the correct Xposed Installer for Magisk, by doing the steps I outlined in my previous post and remember that once it's all installed, the first boot will take forever!
TTYL
Posted from my way cool LG V20 (H910) Nougat 7.0
Zeuszoos said:
netyx62,
It may just need another reboot. But first go into Magisk, look at the SDK Module and make sure the little box is checked.
Then go into the Xposed Installer app and go into the "Framework" section.
Is the switch on?
What color is the rectangle below the switch?
Also, important… Did you use the "Xposed Installer for Magisk"?
There is a different installer for when you have Magisk. It'll say "for Magisk".
*** If you did NOT use the right installer, then you'll need to get the right one and then follow the steps below.
First Google and Download;
"Xposed Installer for Magisk"
I think it's also v3.1.5 for Magisk too.
Then go into Magisk >> Modules and tap the little garbage can for the Framework Module, which will make it uninstall on the next reboot.
But before rebooting, Uninstall the Xposed Installer app.
Now Reboot.
Now start over, using the correct Xposed Installer for Magisk, by doing the steps I outlined in my previous post and remember that once it's all installed, the first boot will take forever!
TTYL
Posted from my way cool LG V20 (H910) Nougat 7.0
Click to expand...
Click to collapse
I used "XposedInstaller_3.1.5-Magisk.apk"
Yes everything is checked in Magisk or Xposed and then the rectangle is yellow with a danger sign
netyx62 said:
I used "XposedInstaller_3.1.5-Magisk.apk"
Yes everything is checked in Magisk or Xposed and then the rectangle is yellow with a danger sign
Click to expand...
Click to collapse
Okay, assuming the switch is on in Xposed, try another reboot. That's what I'd do first.
P.S. You said that you installed the Framework from inside the Magisk app, right? Are you positive you have the right one installed? Which version of Android are you running!
Android Nougat 7.0
Android Nougat 7.1
Android Oreo 8.0
Android Oreo 8.1
Posted from my way cool LG V20 (H910) Nougat 7.0
Zeuszoos said:
Okay, assuming the switch is on in Xposed, try another reboot. That's what I'd do first.
P.S. You said that you installed the Framework from inside the Magisk app, right? Are you positive you have the right one installed? Which version of Android are you running!
Android Nougat 7.0
Android Nougat 7.1
Android Oreo 8.0
Android Oreo 8.1
Posted from my way cool LG V20 (H910) Nougat 7.0
Click to expand...
Click to collapse
I already restart many times ... And I'm on Android 6.0
netyx62 said:
I already restart many times ... And I'm on Android 6.0
Click to expand...
Click to collapse
I'm trying to think of what your problem might be.
Let me ask you, which SDK version ended up being installed? I think it's supposed to be SDK23 for Marshmallow. I do know that there's a 32 bit and a 64 bit version and you need to have the right one for your phone (the phone is either 32 or 64).
In the Magisk Modules, what version SDK does it say is installed?
In Xposed >> Framework, near the bottom, does it say which (32 or 64) the installed framework is? Or does it not show a framework there?
Posted from my way cool LG V20 (H910) Nougat 7.0
Zeuszoos said:
I'm trying to think of what your problem might be.
Let me ask you, which SDK version ended up being installed? I think it's supposed to be SDK23 for Marshmallow. I do know that there's a 32 bit and a 64 bit version and you need to have the right one for your phone (the phone is either 32 or 64).
In the Magisk Modules, what version SDK does it say is installed?
In Xposed >> Framework, near the bottom, does it say which (32 or 64) the installed framework is? Or does it not show a framework there?
Posted from my way cool LG V20 (H910) Nougat 7.0
Click to expand...
Click to collapse
In Magisk it's SDK23. Then my phone is a 64 bit
netyx62 said:
In Magisk it's SDK23. Then my phone is a 64 bit
Click to expand...
Click to collapse
Okay, the only other thing I can think of off the top of my head is the order in which the components are installed. It can be different. On my last phone I had to install the Magisk Framework Mod first and then the Xposed Installer. On my current phone, it's in the order that we did it on yours.
So here's what I'm going to suggest…..
I suggest that you uninstall both the Magisk SDK and the Xposed Installer and we start from scratch using a different method.
Are you game?
Posted from my way cool LG V20 (H910) Nougat 7.0
Sory i just flashed Xposed SDK27 for Pocophone F1 (Beryllium) but stuck in logo, is that bootloop or i just have to wait?
How can i know Xposed is that work succesfully installed in my Pocophone F1?
Thx b4
NB : Now i use ROM MIUI 9.6.14.0 Global Stable & Magisk v18.0 installed.
Zeuszoos said:
Okay, the only other thing I can think of off the top of my head is the order in which the components are installed. It can be different. On my last phone I had to install the Magisk Framework Mod first and then the Xposed Installer. On my current phone, it's in the order that we did it on yours.
So here's what I'm going to suggest…..
I suggest that you uninstall both the Magisk SDK and the Xposed Installer and we start from scratch using a different method.
Are you game?
Posted from my way cool LG V20 (H910) Nougat 7.0
Click to expand...
Click to collapse
Nothing works... I even try to install it without using Magisk but nothing ...
netyx62 said:
Nothing works... I even try to install it without using Magisk but nothing ...
Click to expand...
Click to collapse
As I said, there is another method to try if you wish.
Posted from my way cool LG V20 (H910) Nougat 7.0
Hey there, yesterday I've updated my phone to OOS 10.0.8. Everything went fine, phone is running, but since I've installed that update SafetyNet keeps failing in both, basicIntegrity and ctsProfile.
I have installed Magisk 20.4 and Magisk Manager 7.5.1.
Magisk hide is enabled. I have no modules installed.
Anyone else having this issue or know how to fix it?
Yep, same problem here. Can't seem to fix it either.
Exentric90 said:
Yep, same problem here. Can't seem to fix it either.
Click to expand...
Click to collapse
Do some reading ... https://twitter.com/topjohnwu/status/1237656703929180160
(and for me it is still OK)
foobar66 said:
Do some reading ... https://twitter.com/topjohnwu/status/1237656703929180160
(and for me it is still OK)
Click to expand...
Click to collapse
Yeah I've updated to the beta. So that might be it.
Anyway that sucks. So we're basically screwed if we'd like to have the latest security updates and still keep root.
Sajito said:
Hey there, yesterday I've updated my phone to OOS 10.0.8. Everything went fine, phone is running, but since I've installed that update SafetyNet keeps failing in both, basicIntegrity and ctsProfile.
I have installed Magisk 20.4 and Magisk Manager 7.5.1.
Magisk hide is enabled. I have no modules installed.
Anyone else having this issue or know how to fix it?
Click to expand...
Click to collapse
i have exactly the same configuration, and my safetynet test passes both, cts and basic, as it was before the update
foobar66 said:
Do some reading ... https://twitter.com/topjohnwu/status/1237656703929180160
(and for me it is still OK)
Click to expand...
Click to collapse
I've read about that. I know that since those changes Magisk Hide is not enabled in default installation, that's why I made sure it is enabled on my device. Also as far as I know, those changes should only affect ctsProfile, but not basicIntegration. For me both is failing.
kaiowas82 said:
i have exactly the same configuration, and my safetynet test passes both, cts and basic, as it was before the update
Click to expand...
Click to collapse
But since it's working for you two: Do you use any modules?
Sajito said:
But since it's working for you two: Do you use any modules?
Click to expand...
Click to collapse
systemless hosts and google dialer framework
kaiowas82 said:
systemless hosts and google dialer framework
Click to expand...
Click to collapse
kaiowas82 said:
i have exactly the same configuration, and my safetynet test passes both, cts and basic, as it was before the update
Click to expand...
Click to collapse
I toggled the Magisk hide button in settings and rebooted and it passed both. But, if you click on safetynet a second time it fails. So far I haven't received notification of Google Pay software issue I'm assuming it's good. Guess I'll find out when I go to pay for something at the store.
slapman said:
I toggled the Magisk hide button in settings and rebooted and it passed both. But, if you click on safetynet a second time it fails. So far I haven't received notification of Google Pay software issue I'm assuming it's good. Guess I'll find out when I go to pay for something at the store.
Click to expand...
Click to collapse
just done the test 3 times in a row and always passes, i think you have some other underlying issue
kaiowas82 said:
just done the test 3 times in a row and always passes, i think you have some other underlying issue
Click to expand...
Click to collapse
I have no idea what it could be unless when I did
OTA update from local storage and then restored images on Magisk and installed to inactive slot (after ota). Maybe I should redo the whole thing and use 10.0.8 patched boot.img besides that I have no clue before update had no issues. Anyway I have Viper4android installed OOS native call recording YouTube Vanced and a slew of other modules working so if I can't pay with GP no big deal but it would be nice to have everything working. Be safe stay home and God bless.
I've tried several things that came to my mind, but they all don't work.
So I'll list what I've done, maybe anyone has an idea how to pass SafetyNet again without having to factory reset.
I got the OTA notification, so I downloaded and installed it. Before rebooting I went to Magisk Manager and installed Magisk to the inactive slot.
I forgot to disable the Riru Core and EdXposed Module, but the update went fine.
After the reboot I've noticed that SafetyNet test is failing. I know for sure SafetyNet was succeeding before the udate, since I was playing Pokemon Go before the update. That's impossible while SafetyNet fails.
As I said the weird thing is, both tests are failing, not just ctsProfile. First I made sure Magisk Hide was on and set for all required apps. Also toggled the setting, to make sure it's active. Root hiding is working fine btw.
So I thought maybe having EdXposed installed broke something. I uninstalled EdXposed completely, toggled everything again and rebooted. No luck.
I downloaded the OOS 10.0.8 Update again and installed it through "Locale Update", installed Magisk to inactive partition and rebooted. This time no modules installed at all. Still no luck.
I uninstalled Magisk (completely, not just the manager), rebooted and installed Magisk again. Got root, but the test still failing.
I've not used any module except EdXposed and there's only one Xposed Module I use, to enable background playback for YouTube.
Any ideas what's broken?
I really don't want to factory reset. Alongside Google Pay I use an App from my bank called "Mobiles Bezahlen". It's similar to Google Pay, but it's like using the physical card. Problem with that app is, a card can only be registered 7 times before the app will deny to register that card again. The only way to be able to register my card again is to order a new physical card.
I have not found a way to make a backup of that virtual card.
man i swear i tried somthing and it worked and i pass SafetyNet right now. i'am not a professional and i dont know what exactly i did that fixed the problem. but i will tell you what i did.
- i had some problems with my phone so i did MSM-flashtool it to get it back to clean
- then i installed latest magisk application 7.5.1 from github.
-patched my boot image and flashed it
-i got safetynet check failed.
-i then removed magisk by installing the stock boot image again.
-then i downloaded an older version of magisk which is 7.4.0.
-flashed the same patched boot image again.
WALLAH! i passed safteynet and magisk hide works with bank and google pay apps agian ! <3
-then i updated magisk from the app both manager and magisk zip
-rebooted
-still my safetynet passes! try it and tell me guys!
mastrok said:
man i swear i tried somthing and it worked and i pass SafetyNet right now. i'am not a professional and i dont know what exactly i did that fixed the problem. but i will tell you what i did.
- i had some problems with my phone so i did MSM-flashtool it to get it back to clean
- then i installed latest magisk application 7.5.1 from github.
-patched my boot image and flashed it
-i got safetynet check failed.
-i then removed magisk by installing the stock boot image again.
-then i downloaded an older version of magisk which is 7.4.0.
-flashed the same patched boot image again.
WALLAH! i passed safteynet and magisk hide works with bank and google pay apps agian ! <3
-then i updated magisk from the app both manager and magisk zip
-rebooted
-still my safetynet passes! try it and tell me guys!
Click to expand...
Click to collapse
Very cool, I did something else cause I really like my setup and to tell you the truth I didn't want to go through the whole process again. I did a Google search and found a tutorial on YouTube using edxposed. I followed the tutorial and I passed Safety net I already tested like 5 times but wait a minute... I just tried still passed. Wasn't sure if we can post from other sites but if we can just reply and I will post the link to the video.
mastrok said:
man i swear i tried somthing and it worked and i pass SafetyNet right now. i'am not a professional and i dont know what exactly i did that fixed the problem. but i will tell you what i did.
- i had some problems with my phone so i did MSM-flashtool it to get it back to clean
- then i installed latest magisk application 7.5.1 from github.
-patched my boot image and flashed it
-i got safetynet check failed.
-i then removed magisk by installing the stock boot image again.
-then i downloaded an older version of magisk which is 7.4.0.
-flashed the same patched boot image again.
WALLAH! i passed safteynet and magisk hide works with bank and google pay apps agian ! <3
-then i updated magisk from the app both manager and magisk zip
-rebooted
-still my safetynet passes! try it and tell me guys!
Click to expand...
Click to collapse
How did you install Magisk using 7.4.0? I've installed Magisk Manager 7.4.0, but it doesn't allow me to install Magisk itself without updating first to 7.5.1.
slapman said:
Very cool, I did something else cause I really like my setup and to tell you the truth I didn't want to go through the whole process again. I did a Google search and found a tutorial on YouTube using edxposed. I followed the tutorial and I passed Safety net I already tested like 5 times but wait a minute... I just tried still passed. Wasn't sure if we can post from other sites but if we can just reply and I will post the link to the video.
Click to expand...
Click to collapse
What EdXposed Module are you using? HiddenCore Module? I've tried that. After enabling it the test in Magisk Manager will succeed, but any other SafetyNet Checker fails. Still no Pokemon Go and SafetyNet for me
Sajito said:
How did you install Magisk using 7.4.0? I've installed Magisk Manager 7.4.0, but it doesn't allow me to install Magisk itself without updating first to 7.5.1.
What EdXposed Module are you using? HiddenCore Module? I've tried that. After enabling it the test in Magisk Manager will succeed, but any other SafetyNet Checker fails. Still no Pokemon Go and SafetyNet for me
Click to expand...
Click to collapse
bro just remove any rooting method you have right now. install the old 7.4.0 version. patch your boot image and if you cant try to find the patched image on the internet. flash it via fast boot and your root is successful. now update magisk and you are done
m4str0k said:
bro just remove any rooting method you have right now. install the old 7.4.0 version. patch your boot image and if you cant try to find the patched image on the internet. flash it via fast boot and your root is successful. now update magisk and you are done
Click to expand...
Click to collapse
I tried exactly that, but I can't patch the boot image with 7.4.0, since it tells me I have to update to 7.5.1 first.
edxposed it's the reason why you cannot pass safetynet
kaiowas82 said:
edxposed it's the reason why you cannot pass safetynet
Click to expand...
Click to collapse
As I already said in first post, EdXposed is not installed anymore. I could pass SafetyNet even with EdXposed before the update though.
Also SafetyNet passes with EdXposed installed on my LG G6.
10.3.2 - Device does not meet the minimum security requirements for this application
Hello, there.
I badly need your assistants. I'm not able to use a bank application as it states as "This device does not meet the minimum security requirements for this application", I flashed patched recovery for Magisk Maanger (7.5.1)& the SafetyNet Check shows as "Success". Both ctsProfile & basicIntegrity is green with true against it.
I repacked the Magisk Manager to different and enabled Magisk Hide option; also under "Magisk Hide" section, I have enabled the said bank application but still the above said error message popups. I badly want to access this application. I also face same issue with other gov application.
NOTE: I have other bank app which works perfectly by hiding it under "Magisk Hide" section but some Gov & this bank application doesn't work.
Please help.
vinu4u4ever said:
Hello, there.
I badly need your assistants. I'm not able to use a bank application as it states as "This device does not meet the minimum security requirements for this application", I flashed patched recovery for Magisk Maanger (7.5.1)& the SafetyNet Check shows as "Success". Both ctsProfile & basicIntegrity is green with true against it.
I repacked the Magisk Manager to different and enabled Magisk Hide option; also under "Magisk Hide" section, I have enabled the said bank application but still the above said error message popups. I badly want to access this application. I also face same issue with other gov application.
NOTE: I have other bank app which works perfectly by hiding it under "Magisk Hide" section but some Gov & this bank application doesn't work.
Please help.
Click to expand...
Click to collapse
Use another SafetyNet Checker app to see if SafetyNet really passes on your device.
If it passes then please create another thread for your problem, since it's not related to this thread at all.
Hi to all, this is my first post here on XDA.
I Was doing a little of research to get Safety Net pass on custom rom's (I Have tested this fix on Z Rom V6, Illussion OS 1.7 and Z Rom Lite v2) And by now, here is the solution, It's not a fake screen telling you that you have passed Safety net like the one you get when you use the Hidden Core Method. This is a real fix.
So now, we're using 2 Magisk modules.
1.-safetynet-fix-v1.1.1
2.-MagiskHidePropsConfig-v5.4.0
Ok, after the download of the 2 zips you need to flash through Magisk, (You need to enable MagiskHide) we'll need to use a terminal emulator to get the safety net pass, then after downloading a terminal emulator we need to follow this tutorial:
After that we need to set the new fingerprint of our device to be ''Samsung Galaxy A20 A205W'' After selecting that fingerprint we need to finish the setup, and then Reebot. after that.... Voila, now our device pass Safety Net on custom roms.
Credits to all of the creators of the modules.
Thanks for this info, will try it out once I rooted my phone again.
I cannot find safetynet-fix on magisk modules.
Did they removed it?
In theory magiskhidepropsconfig alone should do the job, sadly i cannot pass ctsProfile test on my phone that has a custom ROM (Xiaomi Mi note 10).
Not out of the box at least.
It has instructions on how to manually change the fingerprint and the security patch date so to pass the ctsProfile test but they are...complicated
I even followed the instructions on the video but still no dice.
Nadaaaaa said:
I cannot find safetynet-fix on magisk modules.
Did they removed it?
In theory magiskhidepropsconfig alone should do the job, sadly i cannot pass ctsProfile test on my phone that has a custom ROM (Xiaomi Mi note 10).
Not out of the box at least.
It has instructions on how to manually change the fingerprint and the security patch date so to pass the ctsProfile test but they are...complicated
I even followed the instructions on the video but still no dice.
Click to expand...
Click to collapse
You should use the .zip file attached to this thread bro, SafetyNet fix is for hardware attestation and unlocked bootloaders, That's why you should use MagiskHidePropsConfig + SafetyNetFix. Google play services must be enabled and not frozen in order to have SafetyNet working. Check if there is a specific fingerprint for your device. And yes, the module has been removed from magisk repository, You can find the latest version here: https://github.com/kdrag0n/safetynet-fix
@PhillipVilla , i am sorry but could you elaborate a bit more?
I have flashed Havoc 4.6 and Magisk v23 onto my Samsung S8+. I have downloaded the two files you attached. But what do you mean by "flash through Magisk"?
My Google Play Store is working fine my problem is no Netflix in Play Store and my TV provider app is not working. So i am trying to get SafetyNET to pass and possibly hide the fact that the phone is rooted.
TheGeneral said:
@PhillipVilla , i am sorry but could you elaborate a bit more?
I have flashed Havoc 4.6 and Magisk v23 onto my Samsung S8+. I have downloaded the two files you attached. But what do you mean by "flash through Magisk"?
My Google Play Store is working fine my problem is no Netflix in Play Store and my TV provider app is not working. So i am trying to get SafetyNET to pass and possibly hide the fact that the phone is rooted.
Click to expand...
Click to collapse
Magisk is an app you should install. You can search in this forum
I have a Moto G6 and I'm having trouble getting the SafetyNet to go green. Installed Magisk v23 and the SafetyNet Fix and the MagiskHidePropConfig and still no dice. Any suggestions?
it's harder to pin down clear decisive info on this box than I thought.
can someone confirm whether using magisk manager (an older version 7xx or 8xx) will successfully flash magisk onto this box without bricking it ?
I've seen a TV Box Stop video on this box that stated messing with the included SuperSU bricks the box...
can it be done via TWRP or patching a downloaded update zip ?
all knowledge welcome
The amlogic boxes, magisk does not work unless you hexedit your boot image. It will install, but not function.
There is a video tutorial on 4pda (russian site)on how to do so, and I'm writing up a visual tutorial at some point soon.
I did the process myself one time, and it works.
The issue I am currently having is my Amlogic Box is also a new "mystery" box.
Repacked by a company called "CONCEPTUM" for the greek market here.
The Model is X96 Air Extreme. I have disassembled it and got the specs on it and photos, and will make a post soon.
Have you gotten yet photos of your internals?
This particular box is somewhat compatible with the
X96Max_Plus_Q2_20201209-1446.img (I had to flash it with that.. long story), everything internal works but the wifi only connects at 54 mbps, not sure if its because of a firmware driver mismatch or its a POS.
I'm looking to flash slimbox pie eventually, I'd rather not open my box if I can avoid it.
Ex Kernel manager reports:
• available ram @ 3794mbs
• max clock speed @ 1908mhz and 4 cores
• GPU mali-G31 with OpenGL ES 3.2
for testing which box you have slimhouse wrote this:
First of all, you should look at the system information in the settings, it will be displayed there: Plus, Plus2, Plus100, etc. However, crooks can fake this and stickers.
Using Device Info HW, you can determine whether there is a 1000Mb LAN and which radio module (turn on WiFi!). If the device was flashed with firmware for another modification, then the information may be missing or unreliable - you need to open and check the presence of the LAN 1000 chip and which radio module is installed.
#
The radio module can be identified by the marking on the chip or by the sticker on the board
X96 Max Plus2. Availability Of 1000Mb Ethernet RTL8211F. You can make sure by connecting 1Gb-supporting devices to the equipment or using Device Info HW, or visually by the presence of a chip on the board. There are 2 antennas. RTL8822CS Radio Module
#
X96 Max Plus2
There was a modification of Plus2, but 2GB of RAM, only the 202009 flash and the special flash for 2GB RAM from JAW are sewn. Photo
And there is also a Plus2 version with the RTL8822BS radio module (Fn-Link 6222B-SRB), there is a problem with the radio module on the ports of Yugos.
Device Info HW says my box has a Wi-Fi chip numbered RTL88x2cs, that's not exactly the same as listed above...
I flashed slimbox pie on this box yesterday and all is more less well with the rom, but this box has no ramdisk and even though TWRP flashed successfully according to he official TWRP app i cannot boot into it.
the box tries 2 or 3 times and boots back to the system. without TWRP that i can get to there's no chance of magisk.
any thoughts or advice welcome
3mel said:
I flashed slimbox pie on this box yesterday and all is more less well with the rom, but this box has no ramdisk and even though TWRP flashed successfully according to he official TWRP app i cannot boot into it.
the box tries 2 or 3 times and boots back to the system. without TWRP that i can get to there's no chance of magisk.
any thoughts or advice welcome
Click to expand...
Click to collapse
you need to find a firmware to flash, you can then modify it with magisk and flash it, i made a guide here on the process
aidanmacgregor said:
you need to find a firmware to flash, you can then modify it with magisk and flash it, i made a guide here on the process
Click to expand...
Click to collapse
thanks for the response
will this work on any rom suitable for the box ?
I'll have get YouTube to slow down the video a little so it's easier to follow what you're opening but I think I get the general unpack repack idea.
if you know of a TWRP image that's flashable via flashify or TWRP official app and that works on this box, can this technique be shortened by just patching that image pre-flash ?
I dropped back down to this boxes stock image, Slimbox couldn't keep magisk running and at random times root just stopped working. I tried Aidan's rom but the UI is not for me and there's no sideloading allowed ?? and it couldn't see my memory card anyway.
with the help of Aidan's guide above I got magisk working on the stock rom but I still have a default su binary that came with the box and has no visible root switch. if anyone knows of a way to deactivate it please share.
thanks