Related
So i tried tweaking up my build.prop but once i rebooted , it was stuck on the tmbobile screen. I went into the stock recovery and wiped thje whole thing but it nstill wont boot. cwm isnt available for this phone so thats an issue. My only hope was adb sideload. when i try pulling/pushing the build.prop i get error:closed or something about syntax error. I have the update.zip and the backup build.prop but i cant fix. And obviously it was rooted so i cant return it. Is there any software that can fix it ? anything ? thanks:laugh:
Similar problem
I'm experiencing a soft-brick as well, however mine is for trying to replace Roboto-Bold. I've tried sideloading an update.zip to replace the changed fonts but it keeps telling me installation aborted. Is there a Stock Factory Image for the OT Fierce anywhere online?
Bricked mine too trying to install a new recovery. I made a backup before hand but can't flash it because the phone constantly reboots. When I try to enter recovery using the hardware keys I get an option for normal or recovery boot and then the phone begins the reboot loop again. Any Ideas?
Hi Bookg,where You find the update.zip?I am looking for it,but have no luck...My Fierce is locked to unlock(too many bad codes)and I am trying to reset counter.Hard reset does not work so flashing clear firmware is my last hope.Please can You share with me?Thanks a lot forward
I'm able to start my phone up but gets stuck at the metro screen. I can go into the recovery and wipe but it just does the same thing. But if I have a back, I just may have a chance to figure this out
rebelminded88 said:
I'm able to start my phone up but gets stuck at the metro screen. I can go into the recovery and wipe but it just does the same thing. But if I have a back, I just may have a chance to figure this out
Click to expand...
Click to collapse
I'll upload the backup I created from my phone tonight and post a link ASAP. If you can pull it off you will be a hero to many!
:highfive:
n3rdy13 said:
I'll upload the backup I created from my phone tonight and post a link ASAP. If you can pull it off you will be a hero to many!
Click to expand...
Click to collapse
update.zip
I am in touch with T-Mob helpline and Alcatel too,but they argue,that there is no update and they cant provide me an update.zip to fix my phone.
I dont know what is Your SW version but my is newer(or unknown L2HUMH2)than L2FUMF2 mentioned by T-Mob here...//support.t-mobile.com/docs/DOC-7393
well whoever has a metropcs version of the backup, let me know
Backup Ready?
n3rdy13 said:
I'll upload the backup I created from my phone tonight and post a link ASAP. If you can pull it off you will be a hero to many!
Click to expand...
Click to collapse
you have it?
Backup ready
I have a backup made if anybody wants it. I can't post the link here yet but I can send you a link via email or private message.
Backup failed, sorry everyone
how to flash it?
n3rdy13 said:
I have a backup made if anybody wants it. I can't post the link here yet but I can send you a link via email or private message.
Click to expand...
Click to collapse
Im interested. Can you send the link to [email protected]?
The backup should be flashed with sp flash tool. Sorry I didn't say that before. You will need to extract the backup first
should be or is flashable?!?according this
rootzwiki.com/topic/14588-need-help-porting-cwmr-to-your-new-device/page-4#entry1564809
Desperate for this too!
Lion7Hearts said:
Im interested. Can you send the link to [email protected]?
Click to expand...
Click to collapse
If you would be so kind to send that to me I would be so thankful: [email protected]
btartsa said:
If you would be so kind to send that to me I would be so thankful: [email protected]
Click to expand...
Click to collapse
soft brick here also. TMo update has me stuck w/o a display
Could also use that if possible....many [email protected]
Lion7Hearts,rhodemaster,btartsa:have You tried flash n3rdy13´s backup?
I had no problem with the update. I unrooted with framaroot then updated. After the ota update finished, I rooted with framaroot. Not a single problem.
Sent from my ALCATEL ONE TOUCH Fierce using xda app-developers app
I have no sign about the update on my Fierce...I try everyday from 2th january.It made Fierce reset to factory or save it Your settings(google account etc)
I was trying to flash the OC1 deodexed rom using flashfire everything was going fine it was flashing then it said it was going to reboot and as in the instructions I waited for 30 min to boot up and nothing but a black screen so I fell Asleep woke up and still nothing so I took out the battery and tried to turn the phone on and nothing.... No power, no usb connection sound, no recovery, no download mode , nothing works Ive been looking all day for a fix... NOTHING all I can do is a JTAG but damn Im broke right now... and a USBJIG but damn it I really need my phone working! USJIB there is no guarantee that it would work its a 50/50 I guess... Any Ideas on how to unbrick using a SD card like on a GS3 post I found using that method?
Akcent13 said:
I was trying to flash the OC1 deodexed rom using flashfire everything was going fine it was flashing then it said it was going to reboot and as in the instructions I waited for 30 min to boot up and nothing but a black screen so I fell Asleep woke up and still nothing so I took out the battery and tried to turn the phone on and nothing.... No power, no usb connection sound, no recovery, no download mode , nothing works Ive been looking all day for a fix... NOTHING all I can do is a JTAG but damn Im broke right now... and a USBJIG but damn it I really need my phone working! USJIB there is no guarantee that it would work its a 50/50 I guess... Any Ideas on how to unbrick using a SD card like on a GS3 post I found using that method?
Click to expand...
Click to collapse
Which ROM did you flash, link?
You will need an OC1 debrick.img in order to recover. Someone on here that is rooted and on the OC1 bootloader will need to create the .img with the following ADB or terminal command and send to you:
Su
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1024 count=131072
You will then need the Win32 Disk Image tool to burn it onto your extsd card. Your device will boot from the OC1 BL on your extsdcard at which point you can go into download mode and Odin flash the OC1 .tar.
Ahhh, so that is how a debrick works.
Perhaps @dgutierrez04 would be willing to help? He is the first one who comes to my mind that has OC1.
muniz_ri said:
Which ROM did you flash, link?
You will need an OC1 debrick.img in order to recover. Someone on here that is rooted and on the OC1 bootloader will need to create the .img with the following ADB or terminal command and send to you:
Su
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1024 count=131072
You will then need the Win32 Disk Image tool to burn it onto your extsd card. Your device will boot from the OC1 BL on your extsdcard at which point you can go into download mode and Odin flash the OC1 .tar.
Click to expand...
Click to collapse
its on droidviews . com verizon galaxy s4 verizon oc1 root
is there any one that could help me get that .img bro? I have a Iphone 5s but I hate I phones I miss my S4... :/
Akcent13 said:
its on droidviews . com verizon galaxy s4 verizon oc1 root
is there any one that could help me get that .img bro? I have a Iphone 5s but I hate I phones I miss my S4... :/
Click to expand...
Click to collapse
Even though I closed my XDA thread they were linking to my AFH account. I just deleted the files so their links are now dead.
I'm sure someone will step up and come through with the files, it takes just a couple minutes to create the .img.
Akcent13 said:
its on droidviews . com verizon galaxy s4 verizon oc1 root
is there any one that could help me get that .img bro? I have a Iphone 5s but I hate I phones I miss my S4... :/
Click to expand...
Click to collapse
Hey there. I think I did it right. so here is the image that you need i just uploaded it to my google drive.. thank you @muniz_ri for providing the steps to get the file for u. and make sure to also thank @XxD34THxX for linking me to this page. if you need something else. i am happy to help in anyway i can
https://drive.google.com/file/d/0B6jLdJmYZakud0hRTUdnbDNnNVU/view?usp=sharing
muniz_ri said:
Even though I closed my XDA thread they were linking to my AFH account. I just deleted the files so their links are now dead.
I'm sure someone will step up and come through with the files, it takes just a couple minutes to create the .img.
Click to expand...
Click to collapse
Thanks to @dgutierrez04 He provided me the debrick.img but I was not able to get my phone to boot up at all... I tried many times I re wrote the .img to the sd card followed all the steps, the batter is 100 percent charged I used my friends sprint gs s4 and no luck, I just ordered 3 different USBJIG'S hope fully one of them will be able to get it into boot mode, but not even sure if that would work since it wont even power on... Thanks Anyways bro, I appreciate the help Thats why I love the XDA FAM, God bless... :good:
dgutierrez04 said:
Hey there. I think I did it right. so here is the image that you need i just uploaded it to my google drive.. thank you @muniz_ri for providing the steps to get the file for u. and make sure to also thank @XxD34THxX for linking me to this page. if you need something else. i am happy to help in anyway i can
https://drive.google.com/file/d/0B6jLdJmYZakud0hRTUdnbDNnNVU/view?usp=sharing
Click to expand...
Click to collapse
Thanks man for the debrick.img god bless... I tried to get my phone working following the steps but nothing man.... USBJIG is my only last hope for now... If not im not going to send it in to get it fixed JTAG no way... Anyways im getting my new Galaxy S6 Edge Plus or Note 5 Next month so I can wait.. Just sucks that I wont be able to call anyone for a wile... but hey better wait then not have nothing later on right? lol thanks for the help anyways bro appreciate it! :good:
dgutierrez04 said:
Hey there. I think I did it right. so here is the image that you need i just uploaded it to my google drive.. thank you @muniz_ri for providing the steps to get the file for u. and make sure to also thank @XxD34THxX for linking me to this page. if you need something else. i am happy to help in anyway i can
https://drive.google.com/file/d/0B6jLdJmYZakud0hRTUdnbDNnNVU/view?usp=sharing
Click to expand...
Click to collapse
Hey I need OC1 Debrick file can u upload it again
Well I'm stuck with a black screen.....nothing. I know I can send it in for jtag but this is my daily driver so I'm hesitant and need it running soon. I was running stang5litre's oc1 rom and tried to flash gigilies port of albe96's super6 v1.87 ROM. I followed instructions to the T. I wiped then installed through flashfire. That could have been the problem but it was supposedly tested with it so idk. Any way I could fix with an sdcard or something? Thanks in advance!!!
Can you get into download mode?
Hold down the volume down, Home key, and Press and Release power
Sent from my SCH-I545 using Tapatalk
No sir completely hard bricked.
Will it turn on at all?
BtoGS488 said:
Will it turn on at all?
Click to expand...
Click to collapse
No sir won't do anything.
Although when I plug it in it says searching for drivers for qhusb_dload. But after awhile it says that this device has malfunctioned.
turn it off again, hold Vol- and power.... (release power when screen light up) still nothing?
No sir but I meant when I plug it into the computer the computer says that.
That's really not good at all. I think JTAG repair is the only hope.
ToastyZ71 said:
That's really not good at all. I think JTAG repair is the only hope.
Click to expand...
Click to collapse
OK thankyou. I was afraid that was what I was gonna have to do. But I still have hope for some kind of sdcard repair. Lol
hard bricked I545 also!
Looking to see if theres a SD Card method before I have to look into getting it JTagged. I dont know anything of how or what firmware it has but its a friends phone and he doesnt even know how it hardbricked. I've been trying to read before I posted anything so this is where im at as I am a newb lol.
I have win32diskimager. I need a debrick img for sch-I545. I also have a 32gb class 10 microsd card.
I'm guessing I get the img, write it to the sd using win32disk. put it in phone, then try to power on correct?
I got a debrick img somewhere on xda, but it was labeled backup.bin, and I didnt really know how to convert it to .img correctly nor do i know how to check if its been written properly?
Any help would be awesome! thank you
dougfunnieyo said:
Looking to see if theres a SD Card method before I have to look into getting it JTagged. I dont know anything of how or what firmware it has but its a friends phone and he doesnt even know how it hardbricked. I've been trying to read before I posted anything so this is where im at as I am a newb lol.
I have win32diskimager. I need a debrick img for sch-I545. I also have a 32gb class 10 microsd card.
I'm guessing I get the img, write it to the sd using win32disk. put it in phone, then try to power on correct?
I got a debrick img somewhere on xda, but it was labeled backup.bin, and I didnt really know how to convert it to .img correctly nor do i know how to check if its been written properly?
Any help would be awesome! thank you
Click to expand...
Click to collapse
First off if your friend didn't do any type of modding or flashing then the problem could be that the power button is stuck in the open position and you may need to get that replaced.
But if it hardbricked during a flash or something of that sort then The sdcard has to be the same amount as phone storage. So if you have the 32gb then in theory that would work. But if you have 16gb phone you would need a 16gb sdcard. I haven't had any luck but I don't have a class 10 sdc so that's probably the problem. Also from the videos ive watched on youtube (so i could be wrong) you don't need to change the file to img just click on the bottom right corner when you are searching for the file press where it say ".img" ".IMG" and change it to "." Then you will be able to find the backup.bin file. Then me know if this helps and or if it worked then I may have to buy myself a class 10 sdc. Thanks
nathancarlile said:
First off if your friend didn't do any type of modding or flashing then the problem could be that the power button is stuck in the open position and you may need to get that replaced.
But if it hardbricked during a flash or something of that sort then The sdcard has to be the same amount as phone storage. So if you have the 32gb then in theory that would work. But if you have 16gb phone you would need a 16gb sdcard. I haven't had any luck but I don't have a class 10 sdc so that's probably the problem. Also from the videos ive watched on youtube (so i could be wrong) you don't need to change the file to img just click on the bottom right corner when you are searching for the file press where it say ".img" ".IMG" and change it to "." Then you will be able to find the backup.bin file. Then me know if this helps and or if it worked then I may have to buy myself a class 10 sdc. Thanks
Click to expand...
Click to collapse
Ya he works for verizon so im guessing he did or tried to flash something. He said it was hardbricked but didnt say how or what he did. I was able to write to the card changing IMG to . allowing me to choose the bin file. The phone didn't boot up or anything, could be wrong debrick img? wish I had different ones to try. This looks like it could be leaning to a JTAG repair, but I still have hope with the SD method.
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
nathancarlile said:
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
Click to expand...
Click to collapse
sure! definitely, anything is worth a shot at this point. Thank you
nathancarlile said:
I have the debrick image for gs4 oc1 I made it from another gs4 thru terminal if you would like me to upload.
Click to expand...
Click to collapse
please upload the file, i need it my i545 is getting hardbrick
thanks before
i have vwz GS4 i try to unlock boot loader using EZ-unlocker that hard brick my device .neeed help to brind it back to life kindly upload debrick img and procedure
Same exact problem happened to me. All the way down to flashing the same ROM. I believe my battery popped out while flashing with FF, once I put it back in my phone wouldn't turn on. I'm in a bit of a panic over here :/
Unlocked to bricked
You can not unlock the boot loader there is no method yet to do so. I wonder if some of you have drained you battery & that's why it won't boot up to at least down loading screen. Try plugging it in to a charger for 1/2 hour or so then try.
If you can get to down loading screen you can hook id to computer & load the stock firmware with Odin.
traco1 said:
You can not unlock the boot loader there is no method yet to do so. I wonder if some of you have drained you battery & that's why it won't boot up to at least down loading screen. Try plugging it in to a charger for 1/2 hour or so then try.
If you can get to down loading screen you can hook id to computer & load the stock firmware with Odin.
Click to expand...
Click to collapse
i try with new battery full charged but still no sign of life in it after using ez-unlocker to unlock boot loader and pc wont detect:silly::crying: any thing when i connect phone with it
nathancarlile said:
Well I'm stuck with a black screen.....nothing. I know I can send it in for jtag but this is my daily driver so I'm hesitant and need it running soon. I was running stang5litre's oc1 rom and tried to flash gigilies port of albe96's super6 v1.87 ROM. I followed instructions to the T. I wiped then installed through flashfire. That could have been the problem but it was supposedly tested with it so idk. Any way I could fix with an sdcard or something? Thanks in advance!!!
Click to expand...
Click to collapse
funny i just did the opposite I bricked flashing stang's new 2.0 on my OC1 OTA phone (got it for cheap after the update) just had rooted it and flashed my gDux to it no problems then flashed stang's and bam. the issue resides in the fact that when I made the OP for Super6 it was based on my downgrading to 4.42 Kernel then using Safestrap. Which a kernel flash has to have the -orig tag at the end of the block in order to flash over the stock kernel. This means that if your on OC1 and you flash a ROM you must not flash a kernel and if you do on accident you need to pull the battery before the install finishes and if thats not possible hold the vol down button in hopes of getting to download mode before trying to boot the phone or it will brick. so if your going to try and flash Stang 2.0 don't use his FF instructions the only time you need to flash a kernel in FF is if your upgrading with mdk, or Safestrap is installed on the phone. otherwise make sure the block for the kernel doesnt have the -orig because that wont work obviously. sucks Im usually more careful when flashing other's releases. if someone has the OTA installed and bootloaders at 5.0 an SD .img for debricking would be useful could someone please zip a result of this command from terminal in the Stock ROM:
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1048576 count=128
if you zip the .img you'll save a lot of bandwidth. I'd like to try and attempt to revive via sdcard (doubt its possible I didnt have luck with NK and an SD) but if nothing else theres been some improvements the qhs_usb department it might be possible to force write the debrick.img I'll do some investigating but if anyones already fixed this issue please let me know
Alright so I recently got the lg k7 from metro pcs and decided to root it. I rooted it using kingroot and then used supersu me so that I could install supersu instead of the one used for kingroot. It worked and then asked me to reboot my phone but when it started up again, it just stayed frozen on the metro pcs logo! I removed the battery and went into recovery mode, (by clicking the down volume+power button) but when it starts up again, it still stays stuck on the metro logo. Im assuming it is stuck on a bootloop? I also believe it is soft brick because i can still access the download mode, although it did take a while as i had to find the dang drivers b/c my computer would not recognize it.
I tried using the LG Mobile Support Tool to try to unbrick it, but it says that it already has the latest firmware installed! I cant do an update recovery either!
Sadly the 7 day exchange and return has ended and I cannot replace it, so is there any other way that anyone knows to unbrick the phone?
Thanks
Did you ever figure this out? I had my k7 goto a secure boot error 9 and cant figure it out.
Sent from my LGMS330 using XDA-Developers mobile app
The only way to fix our LG devices...including @Goongydin device
1. downloada kdz firmware file for our respective model & carrier
2. download lg flashtool & another tool on a windows PC
3. put the device in download mode
4. reflash the firmware(Stock)
check out my tutorial here if the firmware file for the LG K7 is ever released...http://forum.xda-developers.com/android/development/how-to-universally-manually-update-lg-t3280735
HOWEVER the LG K7 firmware file has NOT been released yet & LG wont release if ask...I asked once & they told me they do NOT make it & then I ask another time(different lg representative) She said that file is proprietary & so it can NOT be released to anyone outside of LG...
so I have multiple responses that conflicts with one another especially when the first conversation was with an LG developer...who ACTUALLY makes those files apparently, but inclined that he does NOT.
Xstar410 said:
The only way to fix our LG devices...including @Goongydin device
1. downloada kdz firmware file for our respective model & carrier
2. download lg flashtool & another tool on a windows PC
3. put the device in download mode
4. reflash the firmware(Stock)
check out my tutorial here if the firmware file for the LG K7 is ever released...http://forum.xda-developers.com/android/development/how-to-universally-manually-update-lg-t3280735
HOWEVER the LG K7 firmware file has NOT been released yet & LG wont release if ask...I asked once & they told me they do NOT make it & then I ask another time(different lg representative) She said that file is proprietary & so it can NOT be released to anyone outside of LG...
so I have multiple responses that conflicts with one another especially when the first conversation was with an LG developer...who ACTUALLY makes those files apparently, but inclined that he does NOT.
Click to expand...
Click to collapse
if you have a working one that boots, I can make firmware for it, and share to everyone that needs, I have one myself that doesn't boot
thatotherguy.. said:
if you have a working one that boots, I can make firmware for it, and share to everyone that needs, I have one myself that doesn't boot
Click to expand...
Click to collapse
my phone is still bricked...pretty sure it was really clear I have not fixed my phone yet nor have any files meantion yet...but i am searching far & wide..
(team rocket reference goes here)
Well if anyone has working on and will to make firmware from your phone please contact me
Sent from my SM-G935T using Tapatalk
here you guys go I made stock tot https://drive.google.com/open?id=0By73pguuHS8mSTZJQVkwekVTanM
thatotherguy.. said:
here you guys go I made stock tot https://drive.google.com/open?id=0By73pguuHS8mSTZJQVkwekVTanM
Click to expand...
Click to collapse
Whats that I smell? Hope for my soft bricked K7??? Many many thanks!
Goongydin said:
Whats that I smell? Hope for my soft bricked K7??? Many many thanks!
Click to expand...
Click to collapse
yes it should just flash it, it worked on mine
thatotherguy.. said:
yes it should just flash it, it worked on mine
Click to expand...
Click to collapse
Which dll do i use when i goto flash? I only have ocassional access to a pc so i want to have all the files on my phone ready to go.
Goongydin said:
Which dll do i use when i goto flash? I only have ocassional access to a pc so i want to have all the files on my phone ready to go.
Click to expand...
Click to collapse
I'm not sure I flashed with a program thats isn't allow to say on here
thatotherguy.. said:
I'm not sure I flashed with a program thats isn't allow to say on here
Click to expand...
Click to collapse
Oh. I wonder if a generic dll would work. Any chance youd be willing to pm me? Thanks for your work again.
thatotherguy.. said:
here you guys go I made stock tot.
Click to expand...
Click to collapse
Wow that is amazing! For the sake of educating, would you mind sharing how you made a tot file (or a link describing the process). I have been trying to make a kdz or tot for like the past week and have just been going in circles.
I have the T-Mobile variant of the K7 (LGK330BK. Is this tot carrier specific? All I need is to get back into TWRP to restore my back up or restore my system.img.
thatotherguy.. said:
yes it should just flash it, it worked on mine
Click to expand...
Click to collapse
You don't need to link to a download or anything, but could you please tell us the name of the name of the DLL you used?
I didn't use a DLL file, my program doesn't need it, you can try LGUP
Sent from my SM-G935T using Tapatalk
thatotherguy.. said:
I didn't use a DLL file, my program doesn't need it, you can try LGUP
Click to expand...
Click to collapse
Anyone try the LGUP method? If so did it restore your phone using the tot above?
ledzepman71 said:
Wow that is amazing! For the sake of educating, would you mind sharing how you made a tot file (or a link describing the process). I have been trying to make a kdz or tot for like the past week and have just been going in circles.
I have the T-Mobile variant of the K7 (LGK330BK. Is this tot carrier specific? All I need is to get back into TWRP to restore my back up or restore my system .img.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g-stylo/how-to/official-boost-lg-g-stylo-unbrick-guide-t3215198
If you have already fixed your phone disregard but keep this handy. It works. On the lg ls770 which has a locked bootloader and is very finiky. I have a booting and a non booting k7 and trying to find a system.img or how to extract the system.img from the phone. All i find is how to extract img from firmware. If you could share the system.img it would be appreciated
---------- Post added at 11:17 PM ---------- Previous post was at 11:16 PM ----------
thatotherguy.. said:
I didn't use a DLL file, my program doesn't need it, you can try LGUP
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
Can you p.m. Me the name of the program please
thatotherguy.. said:
here you guys go I made stock tot https://drive.google.com/open?id=0By73pguuHS8mSTZJQVkwekVTanM
Click to expand...
Click to collapse
How can I use this to I brick my k7? What program do I use to flash the tot file? If you can't say it could you please PM me it? Thanks
Can someone with a working K7 please post the output of these commands in adb
Code:
ls -al /dev/block/platform/*/by-name
and
Code:
cat /proc/partitions
Thanks
That recovery app
Could you also PLEASE PM me that program you used to fix your phone as well!!??
Thanks
kw69747 said:
http://forum.xda-developers.com/lg-g-stylo/how-to/official-boost-lg-g-stylo-unbrick-guide-t3215198
If you have already fixed your phone disregard but keep this handy. It works. On the lg ls770 which has a locked bootloader and is very finiky. I have a booting and a non booting k7 and trying to find a system.img or how to extract the system.img from the phone. All i find is how to extract img from firmware. If you could share the system.img it would be appreciated
---------- Post added at 11:17 PM ---------- Previous post was at 11:16 PM ----------
Can you p.m. Me the name of the program please
Click to expand...
Click to collapse
Hey guys,
I'll keep this short but first of all I would like to thank all the people that make this website what it is!
I have always come here for help in the past but this time I am really screwed.
I tried installing a rooted TOT file using LGUP (a 20j file), and I forgot to do OEM UNLOCK before hand. Also, my phone was on 20L so I think I screwed up there anyways.
My phone boots up and gives me the "fail root verification" error in red and just goes on an endless bootloop.
At this point and after looking online for almost 2 hours I think the only two solutions would be to find a TOT file that works with my phone (H901) or the KDZ file that is from the latest update 20L. I have tried using a kdz file from the 20e update (first MM 6.0 update), but it says that antirollback will not allow to go back to a "smaller" firmware.
The files on this thread below are dead otherwise I would not be here asking:
https://forum.xda-developers.com/tmobile-lg-v10/development/rom-v20e-6-0-t-mobile-t3356412
Please can someone reupload the kdz file for the 20L update? or a tot file that would work on my case?
Thank you so much in advance!
tdot.loco said:
Hey guys,
Please can someone reupload the kdz file for the 20L update? or a tot file that would work on my case?
Thank you so much in advance!
Click to expand...
Click to collapse
Here you go https://forum.xda-developers.com/tmobile-lg-v10/development/stock-tot-h901-v20l-gdrive-link-t3555325
Waxim1 said:
Here you go https://forum.xda-developers.com/tmobile-lg-v10/development/stock-tot-h901-v20l-gdrive-link-t3555325
Click to expand...
Click to collapse
Thank you so much! you just saved my life!!!! I truly appreciate you uploading this file! I just finished returning my phone back to stock 20L firmware!