Wifi problem
I have factory reset but same problem face
Plz telling about this problem??
Did you set the time automatically from Internet? Did you set the time zone? Possibly also location.
Also do not connect ethernet cable at the same time.
Just to know: Do you have a Green or Blue board??? Look through the holes at the bottom.
I have same problem... My board color blue... Please help
bimaltapader said:
I have same problem... My board color blue... Please help
Click to expand...
Click to collapse
Did you install a new firmware or you are still with the stock one?
If you have a Blue Board and at the same time an IT6334 wifi chip you need a special firmware for this chip !!
Hello to all forum members and especially for ath 156, great job and very good support! Please help me solving this wifi specific box problem.
Since january 2020 I received from China a HK1 X3,but the tv box seems to have the well known problems with 2,4/5Ghz very poor speed,the original ROM not rooted and seler offers no support at all. On october 2020 I flashed the box with the ROM presented here, u219_HK1_H96maxX3_Ath156Mod3_ENG_BarsEnable_19082020_OK.img, a very good one. This ROM worked very well till march 2021 when, suddenly, when I started again I noticed that I lost wifi, but bluetooth is ok. As a remark, the tv box was used from time to time. When I try to start wifi from the settings, the specific button is activated (on) for 17 seconds then it goes off. No 2,4/5Ghz wifi network is present at all, despite the fact that the router is at 2 max distance. I repeat, bluetooth is ok,I cand connect and transfer file (mobile phone to tv box). For wifi, the box indicates a MAC but no IP adress and no data transfer. HK1 X3 that I own is a 4GB/128GB, with BLUE board marked with a white label "5QC2 4+128+5230 b11" and with HK5230 wifi/bt module. I tried many,many ROMs for this specific box or compatible with S905X3 but no succes to revive wifi functionality. Please help with an original ROM for HK1 X3 with HK5230 wifi module, or indications how to install/write drivers for this wifi module or a compatible one. I mention that I didn;t made any recovery first,my big mistake. Thank you all in advanced!
george fane said:
Hello to all forum members and especially for ath 156, great job and very good support! Please help me solving this wifi specific box problem.
Since january 2020 I received from China a HK1 X3,but the tv box seems to have the well known problems with 2,4/5Ghz very poor speed,the original ROM not rooted and seler offers no support at all. On october 2020 I flashed the box with the ROM presented here, u219_HK1_H96maxX3_Ath156Mod3_ENG_BarsEnable_19082020_OK.img, a very good one. This ROM worked very well till march 2021 when, suddenly, when I started again I noticed that I lost wifi, but bluetooth is ok. As a remark, the tv box was used from time to time. When I try to start wifi from the settings, the specific button is activated (on) for 17 seconds then it goes off. No 2,4/5Ghz wifi network is present at all, despite the fact that the router is at 2 max distance. I repeat, bluetooth is ok,I cand connect and transfer file (mobile phone to tv box). For wifi, the box indicates a MAC but no IP adress and no data transfer. HK1 X3 that I own is a 4GB/128GB, with BLUE board marked with a white label "5QC2 4+128+5230 b11" and with HK5230 wifi/bt module. I tried many,many ROMs for this specific box or compatible with S905X3 but no succes to revive wifi functionality. Please help with an original ROM for HK1 X3 with HK5230 wifi module, or indications how to install/write drivers for this wifi module or a compatible one. I mention that I didn;t made any recovery first,my big mistake. Thank you all in advanced!
Click to expand...
Click to collapse
In addition to what I replied to the other thread :https://forum.xda-developers.com/t/...l-y8-max-amlogic.4157515/page-7#post-85039877
Are you using a small number channel in your router ? (i.e. 1 or 6 and not a channel number of 12 or 13 in 2.4GHz?)
bimaltapader said:
I have same problem... My board color blue... Please help
Click to expand...
Click to collapse
I have the same problem I get a blue board, can someone help me out?
Related
Hi there.I've been using my 6815 for over a year now and was enjoying it till something happened to the wifi.I've used dozens of different firmwares on my phone and not once have this kind of problem before.Basically my wifi is not usable in any of the firmwares for sometime now.I2ve tried original 5.0 than 6.0 several 6.1 s and several 6.5s.I cant even enable wifi in any of the firmwares.For example right now I am using a clean 6.5 rom, and in Hp Asset Viewer it says for wifi :
driver rev:N/A
firmware rev:n/A
Hardware rev:1.0
ip address : n/a
mac adress : n/a
radio preset : yes
In some custom firmwares there are different wireless connection managers and I cant enable wifi in any these managers too.I tried changing things in registiry as suggested to someone like me but it didnt make a difference either.
so... Any suggestions ?
I have problem like this with wi-fi. Can anybody tell us a solution?
wifi module gone, its faulty on board, no solution. happens on atom series.
atom manufacturer quanta uses cheap conponent to build this device.
common fault on atom/hp68xx series
lcd-cannot see by side view, lcd will appear jumping under sunlight, newton ring appear easily
earpiece jack-on board, always get faulty when user plugin and unplug from it, device will think earpiece is still ard and do not project sound out from normal front speaker.
usb-detach from board easily when user drop the device while charging.
wifi-wifi cannot be on, system thinks wifi module is not ready or unavailable.
Tabbe said:
wifi module gone, its faulty on board, no solution. happens on atom series.
atom manufacturer quanta uses cheap conponent to build this device.
common fault on atom/hp68xx series
lcd-cannot see by side view, lcd will appear jumping under sunlight, newton ring appear easily
earpiece jack-on board, always get faulty when user plugin and unplug from it, device will think earpiece is still ard and do not project sound out from normal front speaker.
usb-detach from board easily when user drop the device while charging.
wifi-wifi cannot be on, system thinks wifi module is not ready or unavailable.
Click to expand...
Click to collapse
yes I confirm that probably wifi module is dead or broken..
My first rw6815 work for 2 weeks and after that suddenly GSM modul disappear... I have good working PDA not phone anymore...when i sent it for warranty..they replace for me the whole phone ...
Has anyone experienced a continuous connect, get IP, disconect, connect, get ip disconnect...
It's impossible to download anything if the Nook is disconnecting and connecting once every 3 secs....
Anyone had this problem as well?
Thanks,
Giz
Authentication failure?
That usually is the symptom of authentication failure:
Password or passprhase.
MAC lockout on the router (does your router block non-listed MAC addresses?).
Sadly, useful messages on authentication failures are not specific (for security reasons).
DeanGibson said:
That usually is the symptom of authentication failure:
Password or passprhase.
MAC lockout on the router (does your router block non-listed MAC addresses?).
Sadly, useful messages on authentication failures are not specific (for security reasons).
Click to expand...
Click to collapse
Hi,
Unfortunately, I do get an IP...and am able to start browsing, downloading stuff....etc...but after a couple of secs...the NT just goes crazy and enters this connect/disconnect loop....
I have even changed the WiFi protection from WPA2 into WEP,, changed router channel....changed from N into G....
Same problem always....get no problems with my laptops...
I have the router configured with DHCP enabled, so no static IP addresses defined...
Hi there,
I had some issue like that a year ago. All i had to do was to remove/forget all my favorite wifi networks and then add the one which caused my issue again.
Hi..
Don't know if this might help you...seems quite a problem on:
bookclubs.barnesandnoble.com/t5/NOOK-Tablet-Support
Look for the Thread...won-t-stay-connected-to-my-wi-fi/m-
You already tried different channels, etc, so sounds like a router/client compatibility problem. Just because your laptop connects doesn't mean everything will connect.
Bring Nook to a few places with wifi access and attempt connection. If it can't connect with any, it's a Nook problem, if it connects with some or all, it's your router problem.
If the latter, Google on your router's make & model and apply any firmware update found. Also search on "[router_make] disconnects" to see if there is a reported problem with the router.
As mentioned elsewhere, try setting router to G if currently using N. Some old router still use funky Draft 1.0 N standard. This goes in hand with firmware update suggestion above.
If that doesn't work, try a different router. [To minimize setup work, leave old router in place, and connect new router downlink from old. Disable routing on new to use it as AP only (old one does the routing). Set different channel for the AP, and point your Nook to it.]
If that doesn't work, give up. Return/exchange the Nook, and buy something else.
e.mote said:
You already tried different channels, etc, so sounds like a router/client compatibility problem. Just because your laptop connects doesn't mean everything will connect.
Bring Nook to a few places with wifi access and attempt connection. If it can't connect with any, it's a Nook problem, if it connects with some or all, it's your router problem.
If the latter, Google on your router's make & model and apply any firmware update found. Also search on "[router_make] disconnects" to see if there is a reported problem with the router.
As mentioned elsewhere, try setting router to G if currently using N. Some old router still use funky Draft 1.0 N standard. This goes in hand with firmware update suggestion above.
If that doesn't work, try a different router. [To minimize setup work, leave old router in place, and connect new router downlink from old. Disable routing on new to use it as AP only (old one does the routing). Set different channel for the AP, and point your Nook to it.]
If that doesn't work, give up. Return/exchange the Nook, and buy something else.
Click to expand...
Click to collapse
It's problably a router/NT incompatiblity issue....I have just got a stable WiFi connection at my workplace...but it's an open network which works like a hotspot where you have to use a login/password....
Hum, I have just now realised that I happen to own a NETGEAR DGN1000b router....having just gone to the NetGear's website, it looks like there is a known issue with Blackberry phones as well (I do have a blackberry Storm and get the same connect/disconnect behaviour as I am getting on the NT)...
Here's the link for everyone's reference: http://support.netgear.com/app/products/model/a_id/12208
Cheap f***ing DSL/WiFi router.....I shouldn't expect much more from a router which costs 50EUR, but since the Router provided by TCom got toasted...
I'll try to update the firmware to the latest version (from Sep 2011)...Let's see how it goes...
Thanks again to everyone for having the patience to help me out setting up my NT
This is an awesome forum packed with awesome people!
Cheers,
Gizmo
Hey, I have just updated the router firmware and that fixed the problem!!!
Both my blackberry and my Nook Tablet are now able to connect and stay connected to the WiFi network!
Thanks for the tup guys!
have a question
I have a WNR2000v1 running 1.2.3.7 and the damn thing does not work with the NT, should I bite the bullet and get a new router? and if so I'd like to stick with NetGear and what would be a good model?
Garrett07 said:
I have a WNR2000v1 running 1.2.3.7 and the damn thing does not work with the NT, should I bite the bullet and get a new router? and if so I'd like to stick with NetGear and what would be a good model?
Click to expand...
Click to collapse
Hi!
As you might have read in on omy previous thread posts, I was only able to solve my problem (and ended up solving my blacberry connections issues as well) with a firmware upgrade on my netgear router..did you look for you model on Netgear's website? Did you check the known issues list? My problem had to do with the fact that the router could not handle properly authentication methods used by blabkberry models...
That was what they claimed to have fixed....so I gave it a shot just to make sure that I would't have to buy a new router...
ThyGizmo said:
Hi!
As you might have read in on omy previous thread posts, I was only able to solve my problem (and ended up solving my blacberry connections issues as well) with a firmware upgrade on my netgear router..did you look for you model on Netgear's website? Did you check the known issues list? My problem had to do with the fact that the router could not handle properly authentication methods used by blabkberry models...
That was what they claimed to have fixed....so I gave it a shot just to make sure that I would't have to buy a new router...
Click to expand...
Click to collapse
Like I said, I have the WNR2000v1 which is like a 2009 model, I have the latest update available (as of September of 2010) and i have tried everything like setting it to 54mbs maximum and it has yet to work.
Edit-So I went to Best Buy and bought the WNDR3400 and it works flawlessly out of box, guess the new N protocol (which was my sneaking suspicion) is what the NT runs on, good thing too because my mom would have freaked if she couldn't have downloaded her new books on her christmas present. Thanks for all the help man.
Garrett07 said:
Like I said, I have the WNR2000v1 which is like a 2009 model, I have the latest update available (as of September of 2010) and i have tried everything like setting it to 54mbs maximum and it has yet to work.
Edit-So I went to Best Buy and bought the WNDR3400 and it works flawlessly out of box, guess the new N protocol (which was my sneaking suspicion) is what the NT runs on, good thing too because my mom would have freaked if she couldn't have downloaded her new books on her christmas present. Thanks for all the help man.
Click to expand...
Click to collapse
Well problem solved with buying a new router then.
So you did have the latest firmware on the router as listed in here:
http://support.netgear.com/app/answers/detail/a_id/11895
The KB on the Netgear's website (http://support.netgear.com/app/products/model/a_id/2614) also mentioned some sort of incompatibility with BB which could be extended also to Nooks, I guess...
Well, you can always get some money back by selling your old router on eBay...
Cheers,
Giz
I recently purchased the 16gb Sony Tablet S and am contemplating on whether or not to return it by the 30 day window due to sporadic wifi connection at my apartment. The issue is not as much the reobtaining wifi after the screen unlocks, as it is the general holding of the wifi connection when the screen is on.
I've isolated the problem to my specific router, as it works PERFECTLY at my GF's apt and my parent's house. Always connects right away and stays connected. However at my apt it doesn't always connect right way and have to manually turn the wifi off and on again, and sometimes have to manually hit connect from the wifi screen. When it finally obtains IP address it will connect, but most of the time for only a short period (like 20-30 seconds) before the wifi signal on bottom right just disappears. Then I have to toggle the wifi on and off again and try again. Very annoying. Sometimes it will connect though, and the wifi holds up like it should.
Here are the fixes I've tried so far:
* Reset and Factory Rest device
* Forget/Reconnect to network from device
* Update Router Firmware
* Configure Router - g/n mode and n mode from b/g/n
* Set Router Channel from auto to 1,6 and 11.
* Wifi Lock App (doesn't work and drains battery)
Personally, I feel like the tablet itself has an inferior wireless radio. Compared side by side to my other wifi devices, it has noticeably less signal at the router and diminishes quicker the farther away you go. Now, this doesn't really bother me as I'm usually always near my router. However, when I was scanning all the wifi networks around me (in cmd: netsh wlan show networks mode=bssid) I found over 30 networks around me all using the full channel spectrum. I've tried every channel on my router, but 11 seems the best.
Would a crowded wifi area affect the tablet? But again, my laptop, 2 phones, and PS3 connect at every channel with no problems at my apt. At my parent's house and GF's apt there are only 1 or 2 other available networks that could also be on my channel. That's the only thing I can think of.
I just don't understand why only the tablet is having wifi problems.
I have about a week left to return it, and would like to keep the tablet, but running out of patience. Next, I think I will try using MAC address and see if that works.
Any help would be appreciated!
Try this!
I had the same issue.
I solved the problem
1 - turn off wifi.
2- in accounts - turn off "auto connect"
3- turn on wifi ( test if work )
4- reconect the accounts
too simple .. but works , try it.
Would a crowded wifi area affect the tablet? But again, my laptop, 2 phones, and PS3 connect at every channel with no problems at my apt.
Click to expand...
Click to collapse
Thats certaintly not the problem since i have so many devices logged in on my network, and not having the same problems,
The Wi-Fi on Sony tablet has known issue's like loosing connection when screen goes standby, even if you checked this in settings never to shut down.
The steps in the post above can be the sollution, and if not, sony will make somehow a repair or a dev would fix this. goodluck.
setterose said:
I had the same issue.
I solved the problem
1 - turn off wifi.
2- in accounts - turn off "auto connect"
3- turn on wifi ( test if work )
4- reconect the accounts
too simple .. but works , try it.
Click to expand...
Click to collapse
Thanks. I tried that sequence and it seemed to work for a little bit, but then the problems reoccurred.
Again, the problem is not just that the wifi doesn't pick up right away after standby, but also, and more importantly, it looses wifi BEFORE the screen goes out while I'm using it, repeatedly.
Its very annoying and only happens at my apt and not at other networks. No other device on my network has this problem.
Nobody else has had this problem before?
I remember from older posts that tablet s has problem with certain brand routers. What routers are used in your places.
Kermit33 said:
I remember from older posts that tablet s has problem with certain brand routers. What routers are used in your places.
Click to expand...
Click to collapse
Its a ZyXel brand router that doesn't work. I'm pretty sure the one's that do work are both Linksys. The ZyXel router is probably a cheap one because it came bundled in a promotion from my ISP.
I guess I could try another n router, but still find it strange that all my other wifi devices are fine with the current router.
Wifi Signal
Sony is not as reliable as it used to be... My Tablet S keeps loosing WiFi signal, and the solution I found was to turn off and back on the WiFi. This fix the issue.
However another very annoying problem is that very often I need to hard reset the tablet as it locks the screen with no other way to recover it. Shame on Sony. An the annoying side flash light is ridiculous. I used to have an A100 that aside any design issues, worked perfectly never had any operational issue with it. Should have upgraded to a A500...
What worked for me.
I bought a Sony S as a birthday present for my wife. That was yesterday and today she went to work and left me to set it up for her.
I have a Cisco E3200 router. The tablet could see my router and connect to it but would drop the connection after 5 seconds.
Well, that was the first hour and a half of my day.
Finally, with nothing else to try, I set up a guest account on the router. The tablet found it and connected to it on the first attempt and has been connected now for over four hours including multiple restarts.
I have no idea why this worked. I just know that it did.
Clive.
Same issues here when docking tablet sometimes, but my work around is to turn WiFi off, and hit Fast Reboot ( app by Great Bytes Software) then turn WiFi back on. Fast Reboot seems to do a soft reboot on apps and system and it only takes a few seconds.
Hope this helps!
Maui
Sent from my Sony Tablet S using xda app-developers app
Wifi Issues
I bought the 32G version from Woot recently. The WiFi reception is awful. I am on my second unit same thing.
4 feet from Router (on 2nd floor), 3 bars out of 4. 15 feet goes to 2. Downstairs goes to 1 bar 1MBS. And drops like a hot potato. Sony has sent a RMA for repair. Being this is my second unit with same issue, I doubt there is a fix.
I use a LAptop, netbook, android phone on the same router. No issues. They all work well, even in the basement!
Updated to 4.0 on my original unit, no change.
Just ranting here, hoping for a surprise fix. Other than that Mrs Lincoln how was the play? I love the tablet otherwise. Will probably throw and a spare router downstairs or feed it off my 4G phone. Now that really sucks..LOL
Anyone else
4.03 can solve this problem?
[email protected] said:
4.03 can solve this problem?
Click to expand...
Click to collapse
4.03 did not make a difference.
**EDITED: pls ignore this post. irrelevant.
Sent from my Sony Tablet S using xda app-developers app
sony tablet s wifi issue
Hi all,
after weeks of study here is what i found out:
- wifi issue is not a hard ware issue, it is simply the software.
- wifi issue occurs only with certain routers with both N & G channels , Especially Netgear and BT.
- Wifi manger app makes it better and less annoying, issue still there but less occurring. try different channels.
- Tablet S for some reason does not like the channels used by certain Routers.
- do not bother with wifi lock app, does not do the job and steals ur battery.
- after weeks of trial, tablet is just great, but needs attention from Google.
SO
My friend's wife works for Google, when asked for the favor of the insider , engineers in Google said, first stage is to roll out Xperia release 5 to try and fix problem, then both S and Xperia will get Jelly bean with a definite fix. Testing as we speak.
all I can do now is get a good router and hope for the best.
Fatthyrahim said:
Hi all,
SO
My friend's wife works for Google, when asked for the favor of the insider , engineers in Google said, first stage is to roll out Xperia release 5 to try and fix problem, then both S and Xperia will get Jelly bean with a definite fix. Testing as we speak.
Click to expand...
Click to collapse
Straight from the horse's mouth??? Tablet S will infact be getting Jelly Bean???
Fatthyrahim said:
all I can do now is get a good router and hope for the best.
Click to expand...
Click to collapse
what do you think about sitecom routers?
WIFI More
Fatthyrahim said:
Hi all,
after weeks of study here is what i found out:
- wifi issue is not a hard ware issue, it is simply the software.
- wifi issue occurs only with certain routers with both N & G channels , Especially Netgear and BT.
- Wifi manger app makes it better and less annoying, issue still there but less occurring. try different channels.
- Tablet S for some reason does not like the channels used by certain Routers.
- do not bother with wifi lock app, does not do the job and steals ur battery.
- after weeks of trial, tablet is just great, but needs attention from Google.
SO
My friend's wife works for Google, when asked for the favor of the insider , engineers in Google said, first stage is to roll out Xperia release 5 to try and fix problem, then both S and Xperia will get Jelly bean with a definite fix. Testing as we speak.
all I can do now is get a good router and hope for the best.
Click to expand...
Click to collapse
I have tried 3 different Routers.
Verizon/ActionTecMi424
CheckPoint Z-100G
Linksys WRT54GL
No change no difference.
I finally installed another router on the other floor. Now it works in entire house, but have to change router connections if I move to a different floor.
The big question here I think is:
Is every Tablet S this way or do we have some bad samples? Software or Hardware. Sony has given me and RMA # to return for repair. I am hesitant to do that. If there is no fix or all units are this way.
I am not 100% sure but from my own testing I found it working 90% of the time everywhere else, here is how I tested:
home netgear, does not hold wifi , have to refresh page all the time to browse internet.
Work ( different router not sure what type yet) works just like a dream, fast no wifi drops no refreshes needed.
took it to most free wifi spots, not a problem.
friends house BT, Same issue again.
Wifi manager made it a bit better yes ( have to test now on channels 12 , 13 or 15 , wifi lock app does not work.
I hate to get a different router to get same issue at the end. however different posts elsewhere suggested setting router to N on and G off channels testing each time you make a change, on tablet set to manual ( have not done this bit yet).
It's not like we are all being picky here with Sony, we like the tablet itself and we bought it with a lot of money, we want to be able to browse the internet download things without getting our livers and kidneys enlarged.
more to follow , I am really hoping to be able to get my friend's wife update as she told us GOOGLE IS VERY AWARE OF THE ISSUE.
air16 said:
what do you think about sitecom routers?
Click to expand...
Click to collapse
Bought Sitecom Router last friday, I can say that now my tablet holds wifi signal very well... :good:
WIFI Issue fixed
All,
there was an update last Thursday that fixed the wifi issue, I am not really sure what but my tablet s now holds and keeps wifi everywhere.
I had issued before with netgear and bt routers and after last Thursday it was just fine, i need to review the recent updates done and Let you all know.
I tried it everywhere and works perfect, download speed is perfect , not one drop of wifi so far.
I assume either Sony or Google did something here as it was getting an update last Thursday that lasted about 10 minutes, could not figure out what was that update yet.
Supported list (GA models. Says 4.2, but same for 4.4.4 iirc)
http://i.sbo2.com/page/GA Series Android 4.2 Manual_EN.html
You may need to change/add apn settings. Install this app to get to the settings: https://play.google.com/store/apps/details?id=diewland.settings.mobilenetworks&hl=en
I use this one: http://www.eonon.com/Others/Others/V0049.html (is cheaper on ebay)
Also make sure that the cable is connected firmly to the back of the headunit
Useful information:
http://forum.xda-developers.com/showpost.php?p=58854199&postcount=8715
Could someone direct me to where the support list is found? The top link doesn't work. Just wondering if there has been any additions.
I'd like to have 4g ideally, is this even possible with these units (I own a huifei)? Can pick up a huawei e3372 for £15 on eBay
Sent from my GT-I9505 using Tapatalk
Any tried and tested USB wifi dongle as sometimes my units WIFI doesnt turn on, I am hoping I can just add an external USB WIFI dongle to the OTG USB adapter and use that one that way ????
mikejclark said:
Could someone direct me to where the support list is found? The top link doesn't work. Just wondering if there has been any additions.
I'd like to have 4g ideally, is this even possible with these units (I own a huifei)? Can pick up a huawei e3372 for £15 on eBay
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I have a e3372, but I can't make it work..... not an expert either.... but when I plug it in nothing happens. But it works great in my pc
These two work well together on the Head Unit.
http://www.amazon.co.uk/gp/product/...ue&ref_=ox_sc_act_title_1&smid=A1WCLLO809O2M2
http://www.amazon.co.uk/gp/product/B00I4UQ0AC?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
I whait my unit tomorrow. Can anyone tell is only the listed usb 3g sticks working?
Στάλθηκε από το ONE A2003 μου χρησιμοποιώντας Tapatalk
Only what you see in this post as far as I can tell.....
maximosm said:
I whait my unit tomorrow. Can anyone tell is only the listed usb 3g sticks working?
Στάλθηκε από το ONE A2003 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
You can get other USB broadband modems working if you use the PPP Widget 2 app (https://play.google.com/store/apps/details?id=de.draisberghof.pppwidget2&hl=en). I found it to be pretty annoying though so I came up with an alternative solution.
I now use a TMobile Z915 mobile hotspot. I plan to install a switch to the battery so I can still use it when travelling, but I can otherwise leave it installed in the car and have it powered by the radio. When the car is turned off, it should kill the power to the hotspot. When power is restored it will power up and have instant wifi.
I'm tempted to try my 4G USB broadband modem again just to see if it works now that I've installed the Malaysk ROM. With my portable hotspot, everything is great except that the radio thinks it is always on wifi so it doesn't mind wasting data.
Hello,
I use the Huawei E1750 USB 3G dongle. I see it run not stable and do not know the reason. I usually used this dongle in PC before take it to my car.
Sometime, the HU did not recognizes the dongle, most of times, the problem happens when I start the engine from the HU running by battery's power.
I guess the power supply for the USB port is not enough.
My HU is Klyde MCTB-KLD. RK3066, 800 X 480, Malaysk newest 4.4.4 ROM
Is there someone met this issue before? Please kindly share your experience to help me solve this.
Thanks!
vuquan said:
Hello,
I use the Huawei E1750 USB 3G dongle. I see it run not stable and do not know the reason. I usually used this dongle in PC before take it to my car.
Sometime, the HU did not recognizes the dongle, most of times, the problem happens when I start the engine from the HU running by battery's power.
I guess the power supply for the USB port is not enough.
My HU is Klyde MCTB-KLD. RK3066, 800 X 480, Malaysk newest 4.4.4 ROM
Is there someone met this issue before? Please kindly share your experience to help me solve this.
Thanks!
Click to expand...
Click to collapse
I believe others have seen this same problem and used a powered USB hub. Good luck.
vuquan said:
Hello,
I use the Huawei E1750 USB 3G dongle. I see it run not stable and do not know the reason. I usually used this dongle in PC before take it to my car.
Sometime, the HU did not recognizes the dongle, most of times, the problem happens when I start the engine from the HU running by battery's power.
I guess the power supply for the USB port is not enough.
My HU is Klyde MCTB-KLD. RK3066, 800 X 480, Malaysk newest 4.4.4 ROM
Is there someone met this issue before? Please kindly share your experience to help me solve this.
Thanks!
Click to expand...
Click to collapse
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
der_marv said:
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
Click to expand...
Click to collapse
I have a Huawei E160 and unfortunately the AT ^ SETPORT command doesn't work on my dongle. In the past I've tried AT^U2DIAG=0 which stopped it from working with my HU - fixed by reset using AT^U2DIAG=276.
Based on the above advice, I'm now trying AT^U2DIAG=3. It works with the HU but time will tell if it has fixed the reliability issues. I'll update this when I know more.
For further info - http://www.3g-modem-wiki.com/page/Huawei+AT-commands
der_marv said:
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
Click to expand...
Click to collapse
Thank you!
I will try it and get back later
der_marv said:
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
Click to expand...
Click to collapse
I tried and successed!
The AT-comand must follow this instruction from http://www.3g-modem-wiki.com/page/Huawei+AT-commands
The code for the "AT^U2DIAG=n" command depends on the model of dongle (Support by/Not support by)
The modem did fix quickly and more stable. But bases on the new firmware update feature: "More saving power" with your suggestion: "Disable CD and SD card reader", I think the main reason is the weak power of USB port. So, increase the USB power is more necessary because we may use any other device on it, not 3G modem only.
Thank you!
It hasn't completely fixed mine, the connection still drops out, but it MIGHT be better than before. Can't be sure though. Based on the above advice about firmware reducing power usage, I'll try that next.
This is for the benefit of anyone who owns a Huawei E160:
Do not install the latest firmware 11.609.10.02.432.b418.
After doing this, it wouldn't work with my HU at all. Unable to add APNs - they're not saved as the dongle is not recognised by the HU. It worked on my PC so wasn't broken, but the HU just didn't like it.
I downgraded to 11.609.06.02.94.B409 (was originally on 11.608.02.02.55 so is still an upgrade) and it now works once more.
I'm going to try out the different AT^U2DIAG commands to see if I can improve reliability.
dutchhome said:
I now use a TMobile Z915 mobile hotspot. I plan to install a switch to the battery so I can still use it when travelling, but I can otherwise leave it installed in the car and have it powered by the radio. When the car is turned off, it should kill the power to the hotspot. When power is restored it will power up and have instant wifi..
Click to expand...
Click to collapse
Can you explain this setup more? Maybe some pics? seems like maybe a better scenario than the USB dongle
Hey people,
I have a question. I have a 3g Stick Huawei E1750. It works very good, but I need 4G, because here at the most time only EDGE, and 4G is not supported by the stick. Does anyone knows a compatible working 4g STICK, not a Modem. Thanks
Jaihoidundso said:
Hey people,
I have a question. I have a 3g Stick Huawei E1750. It works very good, but I need 4G, because here at the most time only EDGE, and 4G is not supported by the stick. Does anyone knows a compatible working 4g STICK, not a Modem. Thanks
Click to expand...
Click to collapse
BUMP!
Moto Z has never had a "fantastic" wifi connectivity (with some issues with dhcp too, see my thread about it...), but anyway it worked... since some weeks ago!
Then, without any change in sw (I'm still on MM, rooted and with Xposed), it begins to be unable to connect to quite any 2.4 GHz wifi available (5 GHz connectivity seems to be unaffected) :crying:
It finds networks, then, if I ask to connect them (even on open and not encrypted and not mac filtered wifi networks) it will try to connect for a second, then it returns to "saved" state. After some trying it goes in "error connecting network" status.
Obviously ALL my other android devices connect fine in same conditions and even my Moto Z connected fine before the issue came out.
Only in isolated places with a SINGLE wifi SOMETIMES is able to connect... but I am talking of distances of 2-3 meters from router, not more....
I've already tried to "forget" all networks, to restore wifi defaults, to clear cache & dalvik and tried some "wifi repairing apps" too, with no results. On Lenovo forum I saw some had the same issue and even a factory reset didn'the solve for them.
I think even BT is having same issue, but I'm not sure... (I don't use it a lot....).
Any idea? Others with same issue?
@erfanoabdi no idea about this?
I also Have the same problem. and my request to Lenovo please solve this issue as soon as possible.
Nisar Ali said:
I also Have the same problem. and my request to Lenovo please solve this issue as soon as possible.
Click to expand...
Click to collapse
I begin to think that it's a hardware issue, since even bluetooth seems to be affected as well.
Weird is that networks are anyway detected and with regular dB levels too...
One user on Lenovo forum reported that this began for him when he had the memory of the phone full over 90% and for me it has about been the same bit I think this could be only a coincidence...
enetec said:
I begin to think that it's a hardware issue, since even bluetooth seems to be affected as well.
Weird is that networks are anyway detected and with regular dB levels too...
One user on Lenovo forum reported that this began for him when he had the memory of the phone full over 90% and for me it has about been the same bit I think this could be only a coincidence...
Click to expand...
Click to collapse
Hi, i had this problem too and I think its definitely a hardware issue. I think Lenovo just has some quality assurance issues in the production and you and i just had the luck of getting a defective unit.
I'm really happy that i still had warranty when that happened. The main board on mine was switched, so i guess its not even an wifi/bluetooth antenna issue.
Latest update 7.1.1 September security patch solve the issue.
izamd said:
Latest update 7.1.1 September security patch solve the issue.
Click to expand...
Click to collapse
WiFi unable to connect on 2.4GHz networks issue?
enetec said:
WiFi unable to connect on 2.4GHz networks issue?
Click to expand...
Click to collapse
I can confirm that is working for my moto Z . 2.4GHz without any problem.
izamd said:
I can confirm that is working for my moto Z . 2.4GHz without any problem.
Click to expand...
Click to collapse
Yes, but I'm on MM and my WiFi/BT have not been broken by an update but suddendly with no modify...
izamd said:
Latest update 7.1.1 September security patch solve the issue.
Click to expand...
Click to collapse
But what channel are you on? From what I've gathered it's only retapac right now.
No more having this?
Mine (just before been destroyed by assistance center trying to change battery... ) had begun to not be able to connect (if not sometimes...) on 5 GHz networks too... it definitely seems an hardware issue...
i have the same problem, no wifi and bluetooth. Anybody tried flashing modem?
Losing connection happens mostly when connected to 5GHz, can't find a way to force connection to 2.4GHz.