[magisk][recovery] latest v464 adreno 630 GPU drivers - OnePlus 6 Themes, Apps, and Mods

So first off all this is not my work previously I updated my device GPU driver's version from v408 to v415 by using magisk module but now from this thread
[DRIVER] [10.0+] Adreno 600 Series OpenGL & Vulkan Drivers [[email protected]][1.1.128]
*** Disclaimer I am not responsible for any damage you made to your device You have been warned What Adreno Graphics Drivers do? Fully release the potential of GPU to continuously improve gaming experience. The main functions are optimize the...
forum.xda-developers.com
I got working updated GPU openGL @v464 and vulkan grafix driver's updated to v 1.1.128(previous vs v1.1.87)
Download:
GPU drivers folder :
Adreno Team Graphics Drivers - Google Drive
Device Info HW app :
Device Info HW - Apps on Google Play
Hardware and software information app for Android devices.
play.google.com
Open GL extension app :
GLView Extensions Viewer - Apps on Google Play
Displays the information and the extensions for OpenGLES and Vulkan
play.google.com
So our one plus 6 has Snapdragon 845 SoC which has ADRENO 630 GPU , inside download folder you will see adreno 600 series folder in that you get two another folders ,
AIO(ALL IN ONE) folder which includes zip having both openGL and vulkan driver's this zip is recommended but if you want to flash either openGL or vulkan seperately another folder is there having seperate driver's zip.
While flashing driver's seperately you need to flash OpenGL zip first then flash vulkan driver's.
But if you have issues with driver's like bootloop you can use openGL lite version along with vulkan driver's.
So inside AIO zip yo have to select our SoC version i.e SD845 in that you will see folder named as testing only except that folder choose only stable build folder here our stable build folder is v464 in that folder again you get files named with M(magisk version) and R(recovery version) so magisk version is recommended because it's systemless and if you got issue you can directly remove module from magisk app.
Recovery version file:
If you choose theses file you have to flash them via recovery and if you got any issue you can remove by using remover zip or cache cleaner zip available in add on folder.
So I after flashing you need to check your updated GPU driver's version inside opneGL extension app.
So finally our GPU updated to version v464 dated 13/03/2020
So updating GPU is gimmick or truth:
I used geekbench test for updated vulkan grafix driver's and I got 1973 and previously on old version it was 1941 performance boost is negligible but it's better to be updated than old driver's
Here is small video explaining all

So can I go directly from v408 to v464?
All improvements for the old OP6 are very welcomed.
Edit: I can

RodiNet7601 said:
So can I go directly from v408 to v464?
All improvements for the old OP6 are very welcomed.
Edit: I can
Click to expand...
Click to collapse
Yes cheers

If i decide to try this the procedure is just to boot to recovery and flash.At the moment i'm using unofficial Lineage 18.1 with Twrp,device OP6.P.S: a few days ago i tried with lineage recovery and sideloading.it didn't work,just stuck on infinite lineage boot logo.Thanks

darksx said:
If i decide to try this the procedure is just to boot to recovery and flash.At the moment i'm using unofficial Lineage 18.1 with Twrp,device OP6.P.S: a few days ago i tried with lineage recovery and sideloading.it didn't work,just stuck on infinite lineage boot logo.Thanks
Click to expand...
Click to collapse
This is a Magisk module, not a recovery flash

RodiNet7601 said:
This is a Magisk module, not a recovery flash
Click to expand...
Click to collapse
Obviously there are two files as in OP,recovery and magisk version.

THREAD CLOSED as a subject matter related thread already exists:
[Magisk] Adreno 630 GPU Updated Drivers
Hello everyone I was wondering if our phone gpu drivers could get any update and actually....YES! I found a great Magisk module which can help us in doing it easily The Module name is: Adreno 630 GPU Driver Please before installing it...
forum.xda-developers.com
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse

Related

New display driver

So guys....have you noticed that our display driver doesn't work properly in 3d games??no antialiasing...no anisotropic filtering...low bias...is poor in quality of image...our gpu support opengl es 2.0....but it seems that is activated only opengl es 1.1.....i've modded ati drivers for a long time...so anyone if can provide me the display driver of froyo maybe i can work on it!!i want to try to make a better driver...!also i have the open source of lg....how can i "open" the kernel to see the code??i'm noob with android !
I think that you need is GPU drivers.
(Someone correct me if i'm wrong)
https://github.com/mik9/ThunderG-Kernel/tree/master/drivers/gpu
This's the source of mik_os's Kernel.
But you can use another kernel if you want.
Good luck.
allsalvati said:
I think that you need is GPU drivers.
(Someone correct me if i'm wrong)
https://github.com/mik9/ThunderG-Kernel/tree/master/drivers/gpu
This's the source of mik_os's Kernel.
But you can use another kernel if you want.
Good luck.
Click to expand...
Click to collapse
tnx....i'm working on it!;-)
I have already post this news but seams no one think is good??
------------------------
Hi all I have read it on Italian Blog some news about our Optimus one Sprint branding:
----------
LG Optimus S (LS670) Maintenance Release - LS670ZVC
Enhancements/Fixes:
- SD card detection error
- New drivers for LCD supplier
- Removing first time language selection from the start up wizard
Important Notes:
- Software version is LS670ZVC
- Download and install time is approximately 3 minutes
- Released in stages with 100% of devices having received the update within 4 days
- Refer to the LG Optimus S Maintenance Release blog for install instructions
------------
http://community.sprint.com/baw/message/258387
Perhaps this new upgrade is usefull to solve Display bug??
What do you think?
Thanks in advance
I testet that driver. Did not see anything new
mik_os said:
I testet that driver. Did not see anything new
Click to expand...
Click to collapse
I guess the new LCD driver is only to support a different panel found in newer devices

[ROM] Android Revolution HD 5.0 | ICS | High Quality & Performance | Best STOCK ROM

[ROM] Android Revolution HD 5.0 | ICS | High Quality & Performance | Best STOCK ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly presenting you the most popular ROM for HTC Amaze 4G...
"My phone is now perfectly smooth, fast, stable. I do not expect much more from my phone!"
DarkAdrien
"This release is amazing! ROM feels super fast! Great job Mike & the team! (...) Never noticed any lag. 1 word: brilliant."
Selec1
"Feels a lot smoother in use - scrolling, swiping between sense screens. Much nicer feel. This is a real good one, Mike. Many thanks "
dsm52
​
System details:
Android 4.0.3 (Ice Cream Sandwich) - latest official HTC Amaze 4G 2.14.531.30 (U.S. T-Mobile) firmware
This is improved version of stock ROM - no visual changes!
Very fast, clean & stable!
Full HTC Sense 3.6 Interface
Multi-language (WWE)
For HTC Amaze 4G
Thanks to HTC for the base firmware
Included kernel details:
Stock kernel (the most stable)
ROM details:
Removed software (CPU) rendering - full Adreno220 (GPU) rendering
Fully optimized and tweaked
Root access
Unsecured boot.img
Newest BusyBox
RAM optimizations
System signatures check enabled for system security and safety
Improved virtual memory management
Speed optimizations
Enabled GPU UI rendering
SD Card speed tweak
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All /system applications updated to latest available
All /data applications updated to latest available
Improved CPU governors performance
Most optimal system scheduler
Disabled kernel debugging for better performance
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
Fully de-odexed
init.d scripts (BusyBox run-parts) support
Auto init.d permissions set on boot
sysro/sysrw commands support
Excellent battery life!
Improved EXT4 performance
OpenVPN support
Most up-to-date system files permissions
Adobe Flash Player support
Support almost 24h a day
...and many more!
You need:
HTC Amaze 4G (S-OFF and SuperCID)
4EXT Touch Recovery
Firmware package from downloads section
How to flash:
Download ROM and place it on your SD card
Boot your phone in recovery mode (vol down + power)
In main menu, select "install zip from sdcard"
Select "choose zip from sdcard" and browse to the location of Android Revolution ROM
You can use data wiping option in AROMA (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)
After flashing process is complete, reboot the device
Android Revolution HD 5.0
--- release date: 26 January 2014 ---
Re-worked from strach using latest official HTC 2.14.531.30 (U.S. T-Mobile) update
Added option to Disable Bytecode Verification in AROMA
Re-designed and updated AROMA installer
Fixed SQlite binary
Added custom hosts (ads remover) to AROMA
Added Google Keep to AROMA
Removed multi-tasking tweak from AROMA
Zipaligned using SDK r22.3
Updated Xposed installer to the latest 2.4.1
Possibility to choose between SuperUser and SuperSU in AROMA installer
De-odexed using newest smali/baksmali
Other minor changes and fixes
Included and updated applications:
--- Data partition ---
Adobe Flash Player 11.1.115.81 (Android 4.0+)
Adobe Flash Player 11.1.111.73 (Android 2.0+)
Adobe Reader 11.1.3
Dropbox 2.3.12.10
ES File Explorer 3.0.9.1
Facebook 4.0.0.26.3
Twitter 5.0.10
--- System partition ---
GmsCore 4.1.32 (Android 2.3+ / SDK 9)
Gmail 4.7.2 (Android 4.0+ / SDK 14)
Gmail 2.3.6 (Android 2.2+ / SDK 10)
Google Play 4.5.10
Push Service 1.2.4.6 (Samsung devices)
SuperUser 1.0.2.8
SuperSU 1.91
--- Aroma installer ---
Google Hangouts 2.0.217 (Android 2.3+ / SDK 9)
Google Maps 6.14.4 (Android 2.2+ / SDK 8)
Google Maps 7.5.0 (Android 4.0.3+)
Google Plus 4.2.4.58179886 (Android 3.0+ / SDK 11)
Google Street 1.8.1.2 (Android 2.2+ / SDK 8)
Google YouTube 5.3.32 (Android 2.2+ / SDK 8)
Google TalkBack 3.5.1 (Android 2.2+ / SDK 8)
Google Chrome 32.0.1700.99 (Android 4.0+ / SDK 14)
Google Music 5.3.1317M.940995(Android 2.2+ / SDK 8)
Google Keep 2.1.01 (Android 4.0+ / SDK 14)
Google Drive 1.2.484.18 (Android 2.3+ / SDK 9)
Google Search 3.1.24.941712 (Android 4.1+ / SDK 16)
Google Search 1.4.1.338691 (Android 4.0.3)
Google Search 1.1.2.64376 (Android 2.3.5)
- If your current firmware version doesn't match ROM firmware version, wiping data inside AROMA is highly recommended!​
Android Revolution HD 5.0
​
Important notes:
1. If you want to say "Thanks!"
There are many ways to show your support to the developer. You can:
Press the "Thanks" button.
Hit the donation button and "buy me a beer".
Share your opinion about my work and write some feedback in respective thread.
Advertise my work to your friends.
Rate my thread with 5 stars.
Every way of support is highly appreciated, but it's not expected!​
2. Sharing policy
This forum is about sharing. If you want to use any part of my work, please feel free to do it but remember about some simple rules:
Inform me about using my work by sending me a message. You don’t need my permission, just inform me.
Include link to my thread from where you took particular files.
Give proper credits for what you used.
When it comes to using my ROM as a base you are free to do it only if I don't have "Stock ROMs" thread available for particular device. If such thread exists, you are
obligated to take ROMs from there instead. These threads with "Stock ROMs" are usually updated within 24 hours from the moment when I release my custom ROM.
Sharing is one thing, but please respect some areas of my work like:
ROM name - "Android Revolution HD", "Android Revolution", "Revo HD", "AR HD" etc.
Graphics used in my threads, especially head-banners designed exclusivity for me.
Other parts of my work that are not supposed to be used by others without proper permission.
Please let me keep my threads design unique. I’m sure you can do something even better yourself!​
3. Support
If you have any issues or questions, please feel free to post them in the respective thread. Due to my commitments in real life I can't answer every PM, tweet or facebook post.
If you want to get the fastest and the best answer - ask the question in the thread. Every month I need to remove about 1.000 new messages from my XDA inbox. I’m sure it’s better if I spend this time cooking new ROMs.​
4. Signature banners for users
Due to the increasing number of users flashing my ROMs we introduced some time ago 3 special groups of members.
Android Revolution HD Recognized User – every user might get this rank with proper banner by being active in my thread (or threads).
Helping users to solve problems, answering questions or preparing threads with add-ons for Android Revolution HD are the most common ways to gain this rank. Just be active and we’ll contact you!
Android Revolution HD Advanced User – every user might get this rank with proper banner by doing some amazing modification, application, theme etc. for Android Revolution HD.
Creating simple bootanimation might not be enough, but you never know! Having Recognized User status before is not needed!
Android Revolution HD Supporter – every user who shared some server space with us (with proper bandwidth) will get this banner. Please keep in mind we can't use DropBox shared folders.
What we can use is minimum 20 GB of space and 10 Mbit upload speed. If you want to donate some server space to us, please contact me via private message.
Apart of those special banners, every user might use one of our amazing user banners collected in this thread.
Finally, thanks for using my work! I hope you will enjoy Android Revolution HD!​
--- User banners prepared by KID_1194, adsamcik, sigeltek & jotha ---
Q 1: After flashing Android Revolution HD my battery drains much faster. What can I do?
A: Please charge your battery to 100%, boot your device in ClockworkMod Recovery and go to Advanced ---> Wipe Battery Stats. Also see Question 7.
Also please read this ---> [GUIDE] Enlarge your battery life : an attempt to fix the battery drain
And this ---> [How to] Brilliant Battery Life 100% working!
For more details about wiping battery stats please read this
Click to expand...
Click to collapse
Q 2: My Premium Navigation doesn't work correctly. What should I do?
A: Your Premium Navigation may not work correctly for many reasons. Most of them are not ROM related. You can try the following things:
- reinstall your Locations under "Settings" ---> "Locations"
- remove /sdcard/.data/navigator/Data/Temporary from your SD card
- re-download Google Maps from the Android Market
- clear data from Google Maps in system software management
Q 3: When recording HD video, the playback of the clip keeps freezing. How to fix it?
A: This is probably SD card problem. Format your SD card (FAT32 recommended) to gain silky smooth playback.
Click to expand...
Click to collapse
Q 4: After I reboot my device, mp3 ring-tone is back to default. What should I do?
A: Go to Ringtones > Menu > More Ringtones > Create new ringtone > Select the one you want (Thanks to kill4l)
Q 5: Is there any alternative for SetCPU? I think it slows downy my phone.
A: You can application called No-frills. Remember to check "Allow on boot" option.
Click to expand...
Click to collapse
Q 6: After flashing Android Revolution HD my SD card is being mounted as ready only. What should I do?
A: Connect your SD card to your PC and do defragmentation process. If you still have some problems with SD card, please read this.
Mac users can use the repair function of the MacOS disk utility to solve the read only problem (Thanks to Calimero1205).
Q 7: My CPU load is all the time nearly 100% and in most part it's used by system. What is the reason of that high CPU usage and how can I fix it?
A: Delete your htcsense.com account. It takes A LOT of your battery and CPU usage.
Click to expand...
Click to collapse
Q 8: Do I need to wipe data partition when upgrading from old version of Android Revolution HD?
A: I always recommend wiping data partition but it's absolutely necessary only if I mention that in the changelog. But normally you can live without it.
Wipe data partition if you experience any issues.
Q 9: I have some strange issues with my ROM that nobody reported before. What should I do in first place?
A: In first place you should check, if the MD5 Checksum is correct. Then flash ROM again and see if the issue is gone. A lot of strange issues can be solved this way.
Click to expand...
Click to collapse
Q 10: I had SetCPU installed on Android Revolution HD, then I flashed new version of AR HD and SetCPU doesn't work any more. How to fix it?
A: Please reinstall SetCPU.
Q 11: I can't send/receive MMS or I can't connect with mobile data connection. How can I fix it?
A: Please check your MMS settings or mobile data connection APN settings.
Click to expand...
Click to collapse
Q 12: My phone got random freezes or reboots. How can I fix it?
A: Every CPU is different. It seems that your CPU doesn't like OC or UV (undervolt). Set your CPU to default 1.5GHz.
If it doesn't help, then you need to flash default kernel from the second post.
Q 13: When I listen to music from HTC stock player it accidentally pauses for short time and then keep playing.
A: Turn OFF fastboot in settings.
Click to expand...
Click to collapse
Q 14: My GPS signal is very weak or GPS is not working at all. How can I fix it?
A: There are some solutions:
1. You can download and install FasterFix to improve your signal strength.
2. You can download and install GPS Status & Toolbox to manage your GPS settings.
3. Turn off "Fast boot" under "Settings" ---> "Power" and reboot your phone.
4. Read this, this, this & this
5. [Trick] Speed Up Satelite Fix for GPS on Android
Q 15: My clock/weather widget doesn't show my location. How can I fix it?
A: Please clear data from Google Maps, Clock Widget, Weather, HTC weather sync provider and Weather Provider.
Click to expand...
Click to collapse
Q 16: My Quadrant score is not as high as on different ROM. What does it mean?
A: It means absolutely nothing. Benchmarks on Android System are more or less lottery and they are not showing the real system performance.
There are many settings that can force Quadrant to show more then 3000 points but it's faked performance, that actually can slow down your phone in some circumstances.
What I always emphasize is a real performance, the one you can feel under your fingers. Remember that I/O has some limit and surpassing it shows just a numbers without true ratio.
Also keep in mind that Quadrant has support for Android Gingerbread only in version 1.1.7 and higher.
Q 17: I have com.htc.bgc process force close few times a day. How can I fix it?
A: It's because you have removed HtcTwitter.apk (HTC Twitter application). Please restore it.
Click to expand...
Click to collapse
Q 18: My screen-lock sound and keypad sound while dialing numbers is very low. How can I fix it?
A: Download "Quick Settings" application from Android Market and check system volume slider.
Q 19: When I open up the call screen (where I see the recent calls and callers), the calls won't appear in the list. What to do?
A: Probably you are using 3rd party launcher. Remove the dialer shortcut and re-add it.
Click to expand...
Click to collapse
Q 20: My Wi-Fi doesn't reconnect automatically after boot. How to fix it?
A: Disable fastboot in settings or check this solution.​​
You think you're addicted from flashing ROMs, checking forum the whole day and you feel like "Android" should be your second name? Well, here's something for fun
preacher65 said:
Okay, now I'm getting my world news from XDA. I had no idea this had happened until I read this. Something tells me I'm spending too much time on here!
Click to expand...
Click to collapse
Whiskey103 said:
Well i have some similar experience. I just found out my wife is pregnant for 6 months already... Lol.
And the first thing I asked was : When will you release it?
So I guess i spend to much time here also.
Still a had some spare time it seems. Otherwise the baby is not mine!
Click to expand...
Click to collapse
DarkAdrien said:
My wife is pregnant for 4 months, ETA October 22nd (her upload speed is not so good). If only I could do a nandroid backup of my current life to be able to restore it after
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Performance Tweaks for Android Revolution HD
data_writeback journalism for /system, /data and /cache partitions.
This mod will turn ON data_writeback for all 3 partitions - system, data and cache. This will drastically improve I/O performance (mostly on write operations) at the expense of file system integrity in certain situations, like unexpected system shutdown. The risk is not extreme, but still bigger then regular. Use this to improve your system performance, but you flash it at your own risk!
Download here:
Android Revolution HD EXT4 Tweaks v.0.1
Force GPU rendering on 2D operations.
This mod is working similar to "Render GUI with GPU" option in Development Settings. Flashing this will force whole system to use GPU rendering (instead of CPU) for all kind of 2D/3D operations. This might improve 2D operations performance, but keep in mind that some apps are not working correctly with GPU rendering. After using this mod you no longer need to tick "Render GUI with GPU" in settings. Even if un-ticked it will be still working. Flash it at your own risk!
Download here:
Android Revolution HD GPU Rendering v.0.1​
reserved
mike1986. said:
Download links will be ready in next 24 hours.
Click to expand...
Click to collapse
So awesome to have you here thanks for the hard work, F5, F5, F5
Sent from my HTC Amaze 4G
Awwwww damn it!
So this ROM can only be flashed by the lucky ones that had s-off shipped?
Am I understanding this right? Lol please say no
Sent from my htc Amaze 4g running BeastMOD v1.1.0
TMAC 13 said:
Awwwww damn it!
So this ROM can only be flashed by the lucky ones that had s-off shipped?
Am I understanding this right? Lol please say no
Sent from my htc Amaze 4g running BeastMOD v1.1.0
Click to expand...
Click to collapse
If you have custom recovery flashed then you can flash my ROM with no issues
mike1986. said:
If you have custom recovery flashed then you can flash my ROM with no issues
Click to expand...
Click to collapse
So your saying if I have ClockWorkMod Recovery 5.0.2.0 this will work right? Sorry for the same kinda questions but I just wanna make sure. Still really new to all this and my amaze was the first phone I have rooted. and I don't wanna mess things up.
Thanks for all your work! great to see another rom for this phone!
bmbrad said:
So your saying if I have ClockWorkMod Recovery 5.0.2.0 this will work right? Sorry for the same kinda questions but I just wanna make sure. Still really new to all this and my amaze was the first phone I have rooted. and I don't wanna mess things up.
Thanks for all your work! great to see another rom for this phone!
Click to expand...
Click to collapse
Yes mate, 100% correct
Amaze sounds like amazing
That suits to our ROMs xD
Let's see how amazing it will be ^_^
amazing!!
i been using the desire HD with your revolution rom .
good quality rom!
going to try it out on my amaze
---------- Post added at 08:28 PM ---------- Previous post was at 08:26 PM ----------
one question,
do i need to flash the radio?
isn't it i need to have S-off to flash radio?
Amazing job, Mike! If you, guys, can come up with a way of unlocking the bootloader without involving the HTC method (for warranty reasons) or get S-Off, I will be more than glad to contribute with a nice donation to your cause! Thanks!
Where do I download this rom?
Sent from my HTC_Amaze_4G using xda premium
[email protected] said:
Where do I download this rom?
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
they said within 24 hours..
just be patient..
it worth waiting....
Oh alright thanks, I didn't catch that, appreciate the info
Sent from my HTC_Amaze_4G using xda premium
In the OP it says see second post for a Gingerbread/No Sense rom, do you plan on releasing that for the Amaze as well? Thanks!
Oh nice Mike. We needed a stock ROM around here.
after reading the OP, a few questions:
1. It says that we should use the to-be linked radio with this ROM, will it be different then the stock one at this point?
2. Is this to be an OC ROM/kernel? If so, to what speed initially?
3. Will the ROM/kernel then allow UV with SETCPU?
gaww said:
after reading the OP, a few questions:
1. It says that we should use the to-be linked radio with this ROM, but below it says that no need to flash radio - it is included in the ROM ???
2. Is this to be an OC ROM/kernel? If so, to what speed initially?
3. Will the ROM/kernel then allow UV with SETCPU?
Click to expand...
Click to collapse
1 we can't flash radio on this rom yet. The OP is referring to RILS. But we don't have real S-OFF yet, so we can't flash radios atm.
2 also we don't have custom kernel yet. But we thought, if we move in to the amaze forums we will speed up things a bit. It will come eventually. I hope so no OC in the meantime.
3 see 2 no custom kernel = no UV yet.
The OP used a template, all the links and goodies will be updated/changed when done/available. Just need some time. We start with Rom, we hope the rest will follow our lead
Everything will come step by step
Sent from my HTC Sensation Z710e using Tapatalk

Skype Fix for the Mediapad

Hi!
I may not post in the Development part of the Forum (I have not enough posts), so i post it here. Here is the fix for the Skype problem:
http://forum.xda-developers.com/showthread.php?t=1650608
The developers should replace the Adreno grafik driver with that driver.
Regards,
Thomas
It's already using the latest drivers on the newest international release (using opengles extensions viewer it showed 2184622). I think one of the Russian rom have fixed this problem. Can anyone confirm the driver version on that rom? Maybe the problem isn't in the Adreno driver.
how to flash it without cwm?
441Excelsior said:
how to flash it without cwm?
Click to expand...
Click to collapse
+1
I don't know if the problem is only in the adreno driver (because again, the one in the mediapad latest international build already the latest one... but then again, maybe some files were mixed with the older version or corrupted? who knows). But what I do is flashing the system and cust image from OsiMood rom (from the dev section) so that I don't have to wipe my tablet. You'll lose some default apps (asphalt, lets golf, some google apps which can be downloaded again, etc..) but skype now works and with flashing only the system and cust image I don't lose any apps that I have downloaded and most if not all the settings are still in place.
Btw, the OsiMood rom is based on the russian rom, but it does have English language.
what is the latest international build? C232B002?

VIBE PURE St 1 Rel 26072016

Time Appropriate Greetings fellas!!!
VIBE_PURE is based on the latest VIBEUI ROW Indian release for K3 Note by Lenovo and so it has the bugs that will be present in that release. This rom is developed with the idea to have the best of both words which is the simplicity of AOSP and the features of lenovo tied to K3 note, its a learning process for me and those who wish to test it or modify it are welcome to do it but please credit me and people in my credit section and also please comment in the thread what u have done to correct the bug because in the end all we need is Fully functioning ROM and knowledge of how to do it....
Known Bugs
Whatever the bugs listed for the latest ROW Release.
this is a stable release....rooted, busybox, gapps, xposed and few MultiLanguage...
Has VR mode and Dolby Atmos
With VIBEUI Dev 1629 Kernel...
Sticked to ROW Modem...
Thermal Files from Leishui 1629 Rom
Has Android Nify Xposed module installed which can be enabled in Xposed Installer
MiXplorer and Noozy Music Player Preinstalled.
WARNING TEST THIS AT UR OWN RISK....BACKUP EVERYTHING U HAVE BEFORE DOING ANYTHING...
Boot into TWRP recovery
Wipe Dalvik Cache, Cache, System and Data
Flash the ROM
Reboot....
POST 1 Intro
POST 2 Changelog
ROM DOWNLOAD
VIBE PURE Stable 1
SCREENSHOTS
Created : 26/07/2016
Last Release : 26/07/2016
State : STABLE
Credits :
Lenovo for phone and software, LeiShui, chainfire for supersu, osm0sis for busybox installation finally SuperR for SuperR's Kitchen with which the rom is made.
CHANGELOG
Vibe Pure Stable 1 - Initial Release
Downloading now. Will flash and update soon!
EDIT : I am using the Stable 1 version! Fantastic ROM. Completely preserves the functionality of Lenovo but with an clean front. Hats off. Will test battery life and update soon.
Thankyou pvkiniyan95 for the ROM. I installed on my Lenovo k3 Note K50a40.
UI was butter smooth and no issues regarding gapps FC's. Initial boot took 30mins then removed battery and formatted through twrp 2.8 ,then rebooted. Worked fine. Need more time to check all features. But my experience with this ROM gave pleasant and very smooth. Battery stable. Used hotstar live TV streaming for 30mins consumed around 2%battery. Amazing power stability.
There's a crash when trying to set a locally stored ringtone through Sound settings. Happens all the time. Any workarounds for that ?
I really like this rom but for some reason it cannot find internal sd card. The sdcard0 is missing.
When I connect pen drive via otg it's show POP-UP shows "unfortunately, system ui stoped"
Thx for this room to developers and xda team for this room.flashed today working very well.
It's not the problem
vaibhavmane4 said:
When I connect pen drive via otg it's show POP-UP shows "unfortunately, system ui stoped"
Click to expand...
Click to collapse
It's not the problem with this room it is the problem with mi file manager delete it and get another one like es file manager.
working twrp ? for all custom roms ?
Can some provide the download link. Above link is not working

Extremely DeOdexed, DeBloated ROM Nougat 7.0 for SM-T580/T585LTE GT-A6 2016

Extremely Rom
| Informations/Update |
This is a custom ROM based on the latest official
firmware from Samsung Galaxy Tab-A6 2016 SM-T580/T585LTE
You try this at your own risk, no one is responsible for all that can be happen !
Information about Extremely ROM.​
Based Firmware T580 : DBT-T580XXU2BRB2
Based Firmware T585 : DBT-T585XXU2BRB2
Android 7.0 Nougat.
T580, Security patch 20180201. UPDATED 20180317, SuperSU-v2.82-20170528, Busybox-1.28.1-YDS-ARM. Added (ES, RU) KBD language informations.
T585, Security patch 20180201. UPDATED 20180317, SuperSU-v2.82-20170528, Busybox-1.28.1-YDS-ARM. Added (ES, RU) KBD language informations.
Wizards deleted (AOSP style).
Highly debloated, ±87 packages removed. Some stock applications are available with SamApp (in download section)
All native network communication functions was preserved.
DeOdexed.
DeKnoxed (as you can see in the screenshot on security tab, Knox functionality was entirely removed).
Rooted SuperSU-v2.82, thanks to Chainfire&CCMT.You can also use Magisk (see here).
BusyBox Busybox-v1.28.x-YDS thanks to YashdSaraf. New version available (Download section)
Init.d Enabled for SuperSU.
Internal Encryption off. SuperSU own this now and MAGISK too.
Deactivation of the guest account display, can be reversed with patch in (Download section)
Optimizations: boostSdintSdext, batterytweaks, ram, network, display quality, more responsive, and more . . .
Added some personal sounds files for notifications, rings, alarms as default settings.
Added apps: Extremely RebootMe v1.x / Package Disabler 1.x.x thanks to VuDanThanh.
Size of unpacked rom T580: Original -> 2.23Go / Extremely v1.0.3 -> 1.13Go.
Size of unpacked rom T585: Original -> 2.25Go / Extremely v1.0.1 -> 1.25Go.
Thanks to ASSAYYED for his ASSAYYED KITCHEN.
Click to expand...
Click to collapse
Information about Installation.​Before all:
Backup all, system, data, personal data, copy all your internal storage to a secure place.
Prerequisites / First time installation of TWRP:
Device with TWRP installed -> twrp-3.0.2-0 twrp-3.1.1-0 twrp-3.1.1-0 If you need explanations how to do this:
Download "Exmely_vx.x.xbT58x.zip" (see download section) and put it on your ExtSDCard.
Follow steps from 1 to 3 at How to installing TWRP
4- Download and install Odin3_v3.12.3
5- Download and install SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.62.0 (Sept 2016)
Follow steps from 6 to 10 at How to installing TWRP
You are now in TWRP recovery, follow next steps below.
Installation:
If your internal storage is encrypted, format it > [Wipe]/[FormatData], type "yes". (if you're just installed TWRP it will be encrypted).
If your internal storage is not encrypted normally it will not be erased but make a backup for security.
In TWRP, [Wipe]/[AdvancedWipe] check "System", "Data", "Cache", "Dalvik/Art cache" (Don't check Micro SDCard !!).
In the home screen of TWRP, tap on [Install], [Select Storage] where Extremely Rom is stocked, select "Exmely_vx.x.xb85x.zip" then [Swipe to confirm Flash] and wait until ending.
Reboot to System, don't be afraid, with SuperSu you get 2 time boot.
Be patient, deodexed rom take long time for the first start 2-4 min (and every time you wipe Dalvik/Art cache).
Optional procedures to deactivate useless functionality / enhance performance.
(If you do not know what it is, or you want to keep all the functionality, just skip this step)
After the configuration of your Android system, you can use "DisabledPackage.xml" in your SDCard, to import in Package Disabler 1.x.x app, this is the list of packages that will be frozen. There is lot of apps that not essentials for me but may be usefull for others, you can defrost at any time to get they functionality working again.
Important note, when you import the XML file, the app start directly to freeze the packages and your device seem blocked, just wait 1-2 min and the process will end.
I have deliberately not permanently removed the "packages" of this list to allow some people to have features that are currently not useful to me, such as: "NearbyServices, QuickConnect, PrintServices, ScreenMirroring, Smartview, GameOptimization, etc . . .", I preferred this way so as to be able to activate these according to the future needs. At first boot, none of these packages are frozen, it is necessary to use the soft included in the rom as indicated above.
Some reminders: A frozen application does not appear in the system, is not available in the application list of the phone, consumes no resources and can not be launched by the system.
Apps replacements.​Important:
This Rom come without any Internet Browser, Calculator, Calendar, Mail, Music & Video player, Photo/video editing. Download your favorite with GPlay or you can use these free light apps or see also "SamApp" in the download section, for the original Samsung applications.
SpeakerBoost, I advise not to exceed 10% boost (no pub).
VIA Browser Internet browser (no pub).
RealCalc Scientific Calculator (no pub).
AFWall+ (Android Firewall +) Powerful graphic user interface for integrated iptable firewall (no pub).
Google Agenda (no pub).
K-9 Mail Mail Client multi-account (no pub).
VLC Audio & Video player (no pub).
AutoStart Manager use it carefully, sometimes apps with auto-start need that turned on at boot to maintain some useful activity, ex: "IU syst.", "MTP application", "Bluetooth" . . . (Pub at launch).
Downloads section.
| Information/Update | Understanding meaning of versions numbers |
ROMs.​
Extremely v4.0 SM-T580: Exmely v4.0bT580.zip, this is the T580 ROM . . . Last UPDATE 20180317 See here for more informations on install/update.
Extremely v7.0 SM-T585: Exmely v7.0bT585.zip, this is the T585 ROM . . . Last UPDATE 20180317 See here for more informations on install/update.
Files checksum: Files_checksum.SUM (linux format[LF]). You can check integrity of each files (in case of corrupted zip file). HowTo for Linux, Windows, Mac. users included.
Add-on.​
Exmely Samsung Apps v1.3_20171209: Exmely_SamAppz1.xx.7z, app that include some stock rom applications and more ... for those who want. See here for more informations on list/update and how to proceed. It Include YouTubeAddFree & Backgroud playing app, original Samsung Weather, quick options/search bar, edit option in gallery . . . Last UPDATE 20180317
Exmely bT580_bT585_OffBootFile-patch: Exmely_bT580_bT585_OffBootFile.zip Last UPDATE 20180317 See here for more informations on install/update.
Exmely Switch Multi-Users Patch [on/off]: ExmelySwitchMultiUsersPatch.zip, if you use multi-users account you need this patch (TWRP) to switch between on/off capability, (you can configure multiple accounts and hide them with the switcher, and get it back when you need). Last UPDATE 20170710
Toolbox.​
TWRP 3.1.1.0 backup file: TWRP v3.1.1.0 backup updating your TWRP to latest version with itself (copy the directory included in the .zip file to "/TWRP/BACKUPS/--your-device--/", boot under TWRP, tap on [Restore] and select "TWRP 3.1.1.0", [Swipe to Restore], it's done). Please download the original TWRP file from the official site before using it (to respecting their wishes and their work)
Latest MAGISK [STABLE]: Magisk v16.0.
Latest SuperSU [STABLE]: SuperSU-v2.82-20170528, zip file to use with TWRP. Thanks to Chainfire
(Other SRx version are available but cause some issues with login screen using schema).
Latest BusyBox [STABLE]: Busybox-v1.28.1-YDS-20170906, zip file to use with TWRP. Thanks to YashdSaraf.
Informations / Update
Informations / Update​2018-03
New Extremely rom version available. v7.0 for T585: based on T585XXU2BRB2 and v4.0 for T580: based on T580XXU2BRB2.
2017-12
Extremely Rom v3.0 SM-T580 available T580XXU2BQL1. Security patch 2017-12-01. Information on update
Preparing new version for SM-T580 based on T580NEE2BQL1 (Android security patch level: 01.12.2017)
SM-T580 Chinese version, modded to European seems working as well but not (officialy) published. I prefer to wait for an official American or European version. Information here
Extremely Rom SM-T585 available T585XXU2BQK5. Security patch 2017-11-01. Information on update
Preparing new firmware from Samsung for both models, T580ZCU2BQK5 and T585XXU2BQK5. Security patch 2017-11-01. I don't know if i can mod T580ZCU2BQK5 (Chinese) for European countries, i will try ...
New TWRP 3.2 available from official site, Old backups seems not to be ok with this new version, take care. Information on update
2017-11
New firmware available from Samsung for both models, T585XXU2BQJ1 and T580XXU2BQJ1. Security patch still in 2017-08-01. I don't plan to make a new custom rom for it, useless in my opinion.
2017-10
Removing Exclamation mark in settings menu. (HowTo)
SamApps Updated with last version of Youtube modded app and McAfee protection software, Last UPDATE 20171031 Available in download section
Adding MD5 checksum control for files hosted by FS.
New patch to recover original "boot.img" to use after 1st reboot for correct Magisk installation instead of superSU if you wish. Available in download section
SamApps update with new Youtube modded app and new version of photo editor from samsung, Last UPDATE 20171001 Available in download section
Extremely v2.0bT580 and v5.0bT585 updated, Last UPDATE 20171001 Available in download section
2017-09
Preparing new versions of Extremely for both models SM-T58X from official samsung's ROMs: T585XEF2BQI9 and T580XEF2BQI9. Security patch 20170801
2017-08
SM-T585, European modded, French installation mod, security patch 20170801. UPDATED 20170828, SuperSU-v2.82-SR3-20170813, Busybox-1.27.1-YDS-ARM20170731.
Exmely Samsung Apps v1.3. YouTube 12.32.59. UPDATED 20170828.
Exmely v1.2.1bT580 v4.0bT585 MAGISK13.3 stable-patch updated to handle new T-585 rom. UPDATED 20170828.
Preparing new update T-585 / T585XXU2BQG4 security patch 20170801. Followed by SamApp update with handling this new rom and including new version of YouTube (No adds/Background playing) by [email protected];
Available Youtube v12.29.57 by [email protected] for SamApps ... Last UPDATE 20170808 Available in download section
Available Youtube v12.29.56 by [email protected] & BasicDream, Colors screensaver for SamApps ... Last UPDATE 20170803 Available in download section
2017-07
Last busybox 1.27.1, compatible with magisk13 now. Work fine with both superSU and Magisk13. If you wish you can upgrade it with zip file under TWRP (link in download section, choose "Busybox-1.27.1-YDS-ARM.zip" in directory tree)
Available Youtube 12.27.53 for SamApps ... Last UPDATE 20170720
Available Magisk 13.3 patch ... Last UPDATE 20170720
Exmely_v1.2.xbT580_v2.0.xbT585_MAGISK13.2_patch:Last UPDATE 20170714 Available in download section
Exmely rom v1.2.1bT580: See here for more informations on install/update and how to proceed. Last UPDATE 20170711 Available in download section
Exmely rom v2.0.1bT585: See here for more informations on install/update and how to proceed. Last UPDATE 20170711 Available in download section
Tested: "Latest Stable Magisk Version: v13.1 stable". All work like previous beta version, patched to make it init.d complient. Available in download section
Exmely Samsung Apps v1.12: See here for more informations on list/update and how to proceed. Last UPDATE 20170710 Youtube v12.25.52 Available in download section
Exmely Multi-Users patch: Last UPDATE 20170710 now work with MAGISK patch. Available in download section
MAGISKv13beta for Extremely's rom v1.2T580 & v2.0T585 ONLY with init.d support [20170705] available in download section
I'm preparing a patch or apk to activate init.d with Magiskv13beta.
Extremely RebootMe v1.01: Now included in SamApp's package for update simplification. See here for more informations on list/update and how to proceed. Last UPDATE 20170704 Compatibility with Magisk13beta solved.
Exmely Samsung Apps v1.11: See here for more informations on list/update and how to proceed. Last UPDATE 20170704 Compatibility with Magisk13beta solved.
BETA test of MAGISKv13beta for Extremely's rom v1.2T580 & v2.0T585 ONLY [20170702] for tests purpose . . . Informations/Download here. Updated to MAGISK13(c4377ed)
2017-06
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.62.0 (Sept 2016) updated to latest version uninstalling previous version is a good thing . . .
.
Extremely v1.2bT580 with new rom version "T580UEU2BQF1", European modded, security patch 20170501 (can be applied over previous version of Extremely rom). During modding process I noticed that the security patch had remained in 20170501. Another useless update from Samsung . . .
.
ExmelyFinalizationPacku03-unified.zip for both T580/T585 models v1.x, v2.x UPDATED 20170627 see (Download section), apply it after each install/update with a new rom's version.
.
Exmely Samsung Apps v1.1 SM-T580 & SM-T585: see here for informations. Available in (Download section). UPDATED 20170627 to handle all Extremely's rom versions.
.
Extremely RebootMe apk v1.0 New [20170626] see here for details. Available in (Download section).
.
Extremely v2.0bT585 Available with new rom version "T585XXU2BQF1", European modded, security patch 20170601, Exmely Finalization Pack u03 updated to handle all rom's versions. (all can be applied over previous version of Extremely rom).
.
Exmely Samsung Apps v1.01 SM-T580 & SM-T585: added [20170620], see here for informations. Available in (Download section). Last UPDATED 20170625 with v12.23.60 of YouTube mod.
.
Finalization pack SM-T580 & SM-T585: UPDATED 20170618 Package Disabler updated to 1.1.4, no need to update for old users.
.
I'm working on an APK to add/remove some Samsung pre-installed apps (stock rom), on demand. In replacement of ZIP (TWRP) packs with more apps choices.
.
Extremely v1.1.0bT580 Updated with new rom version "T580XXU2BQE7", Exmely Finalization Pack u02 Updated to handle all rom's versions. (all can be applied over previous version of Extremely rom).
.
MAGISK v13beta and XPOSED questions: Both does not work on our device at this time. See informations -> Xposed | Magisk. Magisk 12 seems to be working with Extremely rom, information here. Tanks to RedNas74 for informing us.
.
Available: New version of Extremely v1.0.3bT580 & v1.0.1bT585, no update needed, it's for new users, these rom comes with latest SuperSU & Busybox. Disable encryption by ashyx removed (no more needed since SuperSU2.82 own this), removing 70Mb (relative to not used handwriting component), patch for "Lockscreen lag" not needed anymore since SU2.82 without ashyx, repackaging to handle better maintenance between T580/T585 versions.
.
Added ExmelyFinder & GalleryEdit Pack for those who need. 1st enable search bar in quick options, 2nd enable image editing in gallery. See (Download section).
.
ExmelyFinalizationPackbu01-unified.zip for both T580/T585 models UPDATED 20170605 see (Download section), no need to update from previous "u01" version, it's just a reconditioning for easier maintenance of both models (autodetect serie and apply what each need).
.
Added Switch Multi-Users Patch for those who need it, it's a switch, so, on/off system. Works with both T580 and T585 models see (Download section).
.
I tested the latest version of the ViperFX 25.05 module, it works well with the T580 and T585 models under Nougat 7.0 rom. informations here.
.
"LockScreen Dirty Patch" updated destination's ROM security added. Useless to apply if already done.
.
I'm working on a new version of ExmelyFinalizationPack.zip, with greater optimizations, visible especially on RAM use side, currently in test.
.
I've found a F..k..g dirty way to solve the LockScreen lag problem
Find SuperSU 2.79SR3 zip file, install it.
Get SuperSU 2.82 latest version and install it, just after the first one.
Reboot, you lock screen work like on Marshmallow.
I've made a zip patch for the lazy peoples, (available in download section).
.
Added Weather pack (Original Samsung) Weather functionality (see download section)
.
Updated Busybox link to latest version (see download section) [the one included in the Extremely v1.0.1 is older]
If someone find the way to switch Selinux status to permissive, let me know it.
Tried without good result
Patching "sepolicy"
su.d shell script
init.d shell script
The SELinux Toggler.ver.4.3.7.build.60
build.prop modification (ro.build.selinux=0)
.
I've requested to the forum's Moderator to change link of this thread [Accepted] now you can find it with this URL:
https://forum.xda-developers.com/galaxy-tab-a/development/extremely-deodexed-debloate-rom-t3615389
[*]Henceforth, the version no longer appears in the title of the link, since I am led to change it according to the version of the proposed rom, I found it preferable.
Sorry for the inconvenience
2017-05
Improving Useful free apps list with volume amplifier app (original volume is not enough loud sometimes), (available in download section).
Extremely v1.0.1 available including SuperSU v2.82 and some optimizations.
Improving optimizations procedure and init.d support with "Finalization pack" (available in download section).
Updating SuperSU with v2.82 and changing structure of certain components included in ROM
For those who have installed Extremely V1.0, you just need to update SuperSU to 2.82 and apply Finalization pack (available in download section).
TWRP v3.1.1.0 backup file of itself (available in download section) to update from v3.1.0.0 directly with it, (without using Odin procedure).
Why do you need to check this post before talking about a problem or something else ?​
In this post, I keep informed of the problems encountered with the Rom Extremely as well as updates concerning it and concerning the main thread.
I would also like to inform you of the progress made in the search for solutions..
Like many human beings, I like when I can read that my hours spent making you satisfied have served you well. A little word sometimes it's a pleasure, do not hesitate to let a comment.
It seems this ROM is not for Spaniards...? ?
Well, if I have time I'll check it...
Very personal the way to select a list of files in and out...
Thanks
Enviado desde mi SM-T580 mediante Tapatalk
pepetops said:
It seems this ROM is not for Spaniards...?
Well, if I have time I'll check it...
Very personal the way to select a list of files in and out...
Thanks
Enviado desde mi SM-T580 mediante Tapatalk
Click to expand...
Click to collapse
I think Spain language is not fully supported, but is inside.
In manufacturer add directory there is no specific place for Spanish language but only for mentioned country.
anyway, let me know if Spanish language is ok ? (i've seen Catalan in configuration steps ...).
wow, very nice rom! all working nicely so far! but im afraid to update supersu to 2.82, will i loose data in twrp then, yeah?
Gesendet von meinem SM-G900F mit Tapatalk
bongmasta said:
wow, very nice rom! all working nicely so far! but im afraid to update supersu to 2.82, will i loose data in twrp then, yeah?
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
Thanks !
Concerning SuperSU 2.82,
there is this thread that say that is not fully functional.
There is another post where you can find all the files needed to proceed upgrading
I have tested the last file SuperSU 2.82-Test1 for the fun and surprisingly, it work well with SM-t580 under Extremely_V1.0 rom . . . No need using NoEncryption patch after update 2.82
A screenshot (in french) of it below . . . really, i would have thought that it does not work or that it is problematic with the anti-encryption patch, but not everything seems to work properly, (first boot look strange with Samsung logo freezing but after a while it goes on). I noticed a better responsiveness of the root access function, especially when accessing the lock screen (password or schema), the same with some applications.
I don't put information on main thread about this because i prefer waiting for an official final version of SuperSU but for those who want to try . . . do what you want and be curious ^^ as always BACKUP save your life !!!
[edit]: Tested with: TWRP 3.1.0.0 and TWRP 3.1.1.0 same results, working well on both with a big lag on 1st reboot (Samsung Logo).
.
I'm using 2.82 on my T580 with Nougat, specifically SR3-SuperSU-v2.79-SR3-20170114223742
luattic said:
Thanks !
Concerning SuperSU 2.82,
there is this thread that say that is not fully functional.
There is another post where you can find all the files needed to proceed upgrading
I have tested the last file SuperSU 2.82-Test1 for the fun and surprisingly, it work well with SM-t580 under Extremely_V1.0 rom . . .
A screenshot (in french) of it below . . . really, i would have thought that it does not work or that it is problematic with the anti-encryption patch, but not everything seems to work properly, (first boot look strange with Samsung logo freezing but after a while it goes on). I noticed a better responsiveness of the root access function, especially when accessing the lock screen (password or schema), the same with some applications.
I don't put information on main thread about this because i prefer waiting for an official final version of SuperSU but for those who want to try . . . do what you want and be curious ^^ as always BACKUP save your life !!!
Click to expand...
Click to collapse
Will Flash this and Test, can you make a rootless or magisk version?
will report back after testing, Thanks :good:
Rom works great thank you
xhitm3n said:
Will Flash this and Test, can you make a rootless or magisk version?
will report back after testing, Thanks :good:
Click to expand...
Click to collapse
Extremely v1.0 is rooted with SuperSU 2.79 latest stable version as mentioned in the description.
Currently i'm testing v2.82 of SuperSU and all is ok, i just waiting some days to certificate thas all is all right with it and mantioning it officialy in the main thread.
Sorry i don't like Magisk cause some of apps have issues with it i prefer using SuperSU but maybe in the future when Magisk will be perfect i will try to include it.
.
twfs said:
Rom works great thank you
Click to expand...
Click to collapse
You're welcome. I hope this version will suit your expectations. Please send me your comments if you have any.
kd7eir said:
I'm using 2.82 on my T580 with Nougat, specifically SR3-SuperSU-v2.79-SR3-20170114223742
Click to expand...
Click to collapse
Sorry i don't understand what you mean. You say use the 2.82 version, then why mentioning the v2.79 SR3 ?
If you give me more explanation maybe i will understand all you want to say.
.
luattic said:
Sorry i don't understand what you mean. You say use the 2.82 version, then why mentioning the v2.79 SR3 ?
If you give me more explanation maybe i will understand all you want to say.
.
Click to expand...
Click to collapse
I mistyped, sorry. I am using 2.82
kd7eir said:
I mistyped, sorry. I am using 2.82
Click to expand...
Click to collapse
Ok,
So, by gathering all the informations of the different edition of the post, in the end, you want tel us that v2.82 work well with stock rom nougat using TWRP 3.1.0.0. Is right ?
luattic said:
Ok,
So, by gathering all the informations of the different edition of the post, in the end, you want tel us that v2.82 work well with stock rom nougat using TWRP 3.1.0.0. Is right ?
Click to expand...
Click to collapse
It works fine with stock nougat and Extremely nougat
luattic said:
Extremely v1.0 is rooted with SuperSU 2.79 latest stable version as mentioned in the description.
Currently i'm testing v2.82 of SuperSU and all is ok, i just waiting some days to certificate thas all is all right with it and mantioning it officialy in the main thread.
Sorry i don't like Magisk cause some of apps have issues with it i prefer using SuperSU but maybe in the future when Magisk will be perfect i will try to include it.
.
Click to expand...
Click to collapse
superSU is better in most cases, actually for Samsung devices, though newest Magisk seems improvement.
If SM-T580 has Chipset Qualcomm Snapdragon instead of Exynos, this ROM would work on SM-T350 variants too...ohh well, wait for Nougat release for SM-T350 then:good:
Nice work by the way, but I would not debloated it way too much as many of new Samsung UX features depends on some apps...
jazzespresso said:
superSU is better in most cases, actually for Samsung devices, though newest Magisk seems improvement.
If SM-T580 has Chipset Qualcomm Snapdragon instead of Exynos, this ROM would work on SM-T350 variants too...ohh well, wait for Nougat release for SM-T350 then:good:
Nice work by the way, but I would not debloated it way too much as many of new Samsung UX features depends on some apps...
Click to expand...
Click to collapse
Sure, actually SuperSu work better than Magisk on samsung devices. but in the future we will see.
I think T580 will never embeded with a Qualcomm cpu because Exynos is made by Samsung itself then they prefer using it.
I don't know anythink about the T350 but when nougat was ready it will be a good thing.
Concerning debloating, you can take note that i've keeped all functionality in this rom, i 've only provided a way to freeze them when these not used.
All deleted package are not necessary for these to work.
.
kd7eir said:
It works fine with stock nougat and Extremely nougat
Click to expand...
Click to collapse
Thanks for the information, i currently testing over the time to be sure that all is ok with it.
If you want to upgrade your TWRP, you can do, there is no big difference from 3.1.0.0 to 3.1.1.0.
I can provide you TWRP 3.1.1.0 in TWRP format to skip "Odin" update process . . .
luattic i want to make u a child!
Gesendet von meinem SM-G900F mit Tapatalk
bongmasta said:
luattic i want to make u a child!
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
Hum how i must do take that ^^
Right, well, don't forget to read informations update, to enable init.d functionality after SuperSU update (if you use it).

Categories

Resources