Since the update to android 11 I have been able to use any usb functions on my LG v60 thinq. I can't even connect my phone to my PC via usb.
No usb options show at all when is connect it and in dev options when is select the usb options the screen pops up and disappear la quickly. Has anybody else had this issue and how is it fixed?
I will Try a factory reset
Related
Yeah, so i've read plenty of topics about USB problems, but none gave me the
anserw.
I'm running Villain ROM 3.0. I just cant connect my phone to the computer (Mac).
It work well before also after flashing Villain.
What i tried:
1. connecting my phone without usb debuging ->phone gives the sound and report in the notification bar : "MTP - initializing" then "USB Connected, MTP-connected" But it does not gives a connection with my mac.
2. Connecting my phone with usb debuging ->phone gives the sound, but nothing happens. nothing in the notification bar neither on the computer. It's strange becouse before it was making the same sound and giving me the info in the notification to connect.
3. I've also tried KIES air it works fine. i can see my phone content, but when im trying to send one file (130mb) there is no reaction to this.
Also some time ago i was able to get usb working by simply choosing usb debuging and restarting phone.
But now i have no acces to my storage
Please help
I have a similar problem.
When I connect my SGSII to my PC (with USB Debugging On) I see 2 Removable Drives in Windows' Explorer. If I click on either one I get the "Please Insert Disk". If I connect to the same USB with USB Debugging off, then Kies Starts but does not connect.
Now the weird bit, if I do the same thing in the next USB port, then everything works fine.
Going back to the first USB slot then the problem reappears.
The 2 USB slots are next to each other and go back to the same controller on the motherboard. I have removed Kies and reinstalled Kies. I have uninstalled all the drivers. I have even changed the USB cable. When I plug a USB External Hard Drive into either USB, it works fine.
Maybe the phone just likes the one connection per computer. I'll have to test that out in my work's PC.
Update:
managed to get a microUSB cable and tested it on my work's PC. Exact same situation. Both PCs run Windows XPpro.
Has anyone else noticed this?
Now, when you said that, i checked with my second usb por, and everything works fine .
So thanks for your help. One working with sgs2 usb port is enought for me
Hello,
Few weeks ago I updated my Tablet to ICS with AiO-Tool by condi. Today I tried to connect my Tablet to PC to use some of the AiO-functions. But my Tablet doesn't show up in devices list in Windows. In device-manager there is no device that could be my tablet. Normally it says "Unknown device" but there is still nothing
Does anybody has the same problem or knows how to solve this? Thank you
djlars
Try to set usb debugging off. Then connect and re enable it again. If that doesn't work restart you tab in recovery mode let you pc install the driver and then reboot system. If your pc doesnt show any thing then try a other usb port on your pc last you could try is to use a device thats compitable with your tab like a camera or something but you will need the official kable from sony to connect the micro usb to normal usb...
Hi everyone.
So I have a Motorola Droid RAZR XT910 its on 4.0.4 OTA with no root.
The issue I have is that I connect the phone to my PC via USB cable and it does not pick it up.
A few things you must know is:
•I have windows 7 32-bit and
•I am using the cable that comes with my phone
What happens when I plug my phone is the computer says installing drivers for unknown device and then it claims to have successfully installing them for "unknown device". My phone does give me option to chose what type of connection I want but it does charge.
Things I have tried:
•A different cable
•A different PC
• Re-installing drivers
• Re-installing Motocast
•Trying with USB Debugging enabled and disabled
•Different USB ports
•Factory reset
•Different USB ports
•Tried installing PIM Sync form Google Play Store
So yeah that's my problem any help will be helpful...
Try the drivers here:
http://www.motorola.com/consumers/v...59431210VgnVCM1000008406b00aRCRD&pubid=987654
When you try another cable, make sure that works with another device, and not just for charging.
The below instructions will help you troubleshoot if there is a problem with the usb connector on your phone.
1.Power off and disconnect usb cable.
2.Press and hold vol up and down, then hold the power button.
3.You should come to a boot mode selection menu.
4.Press vol down twice to highlight AP fastboot, press vol up once to select.
5.You should see AP fastboot flash mode (s), with last 2 lines saying "Connect USB, Data Cable"
6.Connect your USB cable to your PC and phone, and see if it says USB connected.
7. If nothing happens then it's probably a hardware problem, get it repaired.
Nikorasu said:
Try the drivers here:
http://www.motorola.com/consumers/v...59431210VgnVCM1000008406b00aRCRD&pubid=987654
When you try another cable, make sure that works with another device, and not just for charging.
The below instructions will help you troubleshoot if there is a problem with the usb connector on your phone.
1.Power off and disconnect usb cable.
2.Press and hold vol up and down, then hold the power button.
3.You should come to a boot mode selection menu.
4.Press vol down twice to highlight AP fastboot, press vol up once to select.
5.You should see AP fastboot flash mode (s), with last 2 lines saying "Connect USB, Data Cable"
6.Connect your USB cable to your PC and phone, and see if it says USB connected.
7. If nothing happens then it's probably a hardware problem, get it repaired.
Click to expand...
Click to collapse
Hi thank you for your help.
So I did this method on my PC and it was unsuccessful but i tried it on my mothers and it worked!
So I will update the drivers on my mothers PC and see If I can successfully connect to her PC and use USB mass storage for the first time since I've had Ice Cream Sandwich!
I will keep you updated
Its definitely software. Ill have to wait till there's a rooting application that doesn't require a connection between a PC and phone. One rooted I can flash a ROM from there on...
On your mother's PC, it worked in AP fastboot right? As in the words "USB connected" appears on your phone.
From there you can flash a rom.
Nikorasu said:
On your mother's PC, it worked in AP fastboot right? As in the words "USB connected" appears on your phone.
From there you can flash a rom.
Click to expand...
Click to collapse
I can flash fastboot files which I dont want to do.. I want to flash custom ROMs which require root.
The ap fastboot worked for me but when i restarted the phone it still wont connect with mass storage. i do not own a motorola usb cable mine is an LG and i dont really have money to buy one. bought the phone on ebay and it did not ship with one so ive been using this. it only connects as charging.
I have an Optimus L9, which was working fine a month ago. I have made no changes to it, but now when I plug in to USB the options for connecting do not come up on the phone, and the PC doesn't recognize that it has been plugged in...However, it still charges fine.
I have:
Played with the USB options.
Turned "Ask on connect" on and off
Checked to make sure USB Debugging was off
Installed the latest LG drivers
Nothing, I cannot connect to USB to transfer files, and my phone doesn't recognize (with the popup four options) at all that a USB cable is plugged in besides charging fine.
I have googled and found no answers to my problem.. was hoping someone here might know.
desertw0lf said:
I have an Optimus L9, which was working fine a month ago. I have made no changes to it, but now when I plug in to USB the options for connecting do not come up on the phone, and the PC doesn't recognize that it has been plugged in...However, it still charges fine.
I have:
Played with the USB options.
Turned "Ask on connect" on and off
Checked to make sure USB Debugging was off
Installed the latest LG drivers
Nothing, I cannot connect to USB to transfer files, and my phone doesn't recognize (with the popup four options) at all that a USB cable is plugged in besides charging fine.
I have googled and found no answers to my problem.. was hoping someone here might know.
Click to expand...
Click to collapse
I tried using another USB cable (my GF has the same phone) and nothing. Her phone pops up the options, so it appears the issue is with the phone itself... I guess a backup and restore are my only options?
I have the same issue, and it was from clearing out the phone to reinstall 10d (metropcs), then upgrade to 10e...i cant get it to work.
I just found 3 other people who had similar problems to this. Although most of them did something to make it unable to connect. Try Kuma's persist.img here http://forum.xda-developers.com/showthread.php?p=49475336#post49475336
engeering mode
Hello, my I was the same and so solve
1: enter engineer mode (dial 3845 # * 768 # or 3845 # * 769 # or 3845 # * 760 # depending on your phone model)
2: Option port setting
3: Select CP Reset
4: select pot again setting
5: cp usb
end
Sorry my english
dear all, this is my first time here, i am having issue with my legion phone 2 dual, the left usb is able to charge but unable to connect to laptop, it show usb malfunction and as per screenshot, even when i am not charging nor connected, it will still keep prompting charging.
i try to use the bottom usb c to update firmware but fail.
any advise?
Change Default USB Mode in developer options to something other than No Data Transfer. You may be missing Qualcomm HSUSB and Android adb/fastboot drivers if you are using Windows.