Related
Resurrection Remix 5.8.0 Nougat for Samsung Galaxy Tab 4 10.1" (matissewifi)
Installation Instructions
- Download the latest build of Resurrection ROM - https://www.androidfilehost.com/?w=files&flid=148099
- Download Gapps (ARM 7.1 Micro/Nano/Other) - http://opengapps.org/
- Take a nandroid backup
- Required - Wipe system, cache, dalvik cache
- Recommended - Wipe data/factory reset (REQUIRED if not RR 5.8.x previously)
- Flash ROM and Gapps using latest TWRP recovery (3.x)
- Reboot.
- First boot may take a while...if seems like looping turn off and on again should be fine.
- Enjoy!
Sorry for basic introduction will edit later
XDA:DevDB Information
[ROM][UNOFFICIAL][7.1.1 N] Resurrection Remix 5.8.0 [SM-T530/T531], ROM for the Samsung Galaxy Tab 4
Contributors
meadsy13, sub77
Source Code: https://github.com/smeadsa
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2017-01-24
Last Updated 2017-01-29
Reserved
reserved
Do you plan to fix the camera and microphone?
Oooh very nice. Will try wenn at home.
Edit: oh, wait. It only says matissewifi. Is it not working with lte version? I'll try anyway and report back
@meadsy13 . Thanks for new project.:good:
Cant open download link.
repey6 said:
@meadsy13 . Thanks for new project.:good:
Cant open download link.
Click to expand...
Click to collapse
Have just edited please try again and let me know.
I'm uploading to downloads section of this project so will be available there too soon.
meadsy13 said:
Have just edited please try again and let me know.
I'm uploading to downloads section of this project so will be available there too soon.
Click to expand...
Click to collapse
I cant download again on my PC. I can download rom by my browser on Tab only with fire dance
repey6 said:
I cant download again on my PC. I can download rom by my browser on Tab only with fire dance
Click to expand...
Click to collapse
Have just tested link from my partner's phone and is fine not sure what problem is there.
Is in downloads section now anyway.
booyak said:
Oooh very nice. Will try wenn at home.
Edit: oh, wait. It only says matissewifi. Is it not working with lte version? I'll try anyway and report back
Click to expand...
Click to collapse
Not keen on trying an LTE build as had problem on lineage build I took it off my drive. Was bootlooping.
If you want to try WiFi build is at your own risk. Please backup first. Don't think will work tho if does boot LTE won't work.
meadsy13 said:
Have just tested link from my partner's phone and is fine not sure what problem is there.
Is in downloads section now anyway.
Click to expand...
Click to collapse
Dont worry . This problem only with my main browser. I have another else
I always do backups of course
Thanks for the heads up
@meadsy13
Which TWRP did you use?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
@meadsy13 can you take else one project ? DU 7.1.1 . @sub77 promised me but ....
You do roms very fast:good:
meadsy13 said:
Is in downloads section now anyway.
Click to expand...
Click to collapse
Yes it works perfectly:good:
Der-Knuffi said:
@meadsy13
Which TWRP did you use?
Click to expand...
Click to collapse
twrp version - 3.0.0-6
meadsy13 said:
Not keen on trying an LTE build as had problem on lineage build I took it off my drive. Was bootlooping.
If you want to try WiFi build is at your own risk. Please backup first. Don't think will work tho if does boot LTE won't work.
Click to expand...
Click to collapse
It did not even finish flashing. It said incompatible device. Unfortunate, cause I really like RR. Have used it with my cellphone for more than one year now.
I cant to connect to wi-fi when router on 13(max) channel. Only on channel "Avto" in router. And in Linage too. Pity.
del
is the camera working on this?
Hi!
Just wanted to publish here the CR-DROID-ROM for our beloved Xiaomi Redmi 3/Pro.
Note:
I'm only the publisher, not the maintainer of this ROM. While you can post bug-reports here, they cannot be fixed by me.
Description from the dev-site:
This is a free AOSP / CyanogenMod Android based ROM bringing a lot of custom features ported from AOSPA, SlimRoms, OmniRom and many others great roms out there
crDroid brings what Android have of most advanced in terms of customization and stability.
Click to expand...
Click to collapse
The dev-site at Google+:
https://plus.google.com/communities/118297646046960923906
LINKS:
DOWNLOAD-LINK for crDroid with standard-kernel (hosted at Mega.nz)
DOWNLOAD-LINK for crDroid with DT2W-kernel (hosted at Mega.nz)
WHOLE DOWNLOAD-FOLDER (with older versions)
New Revision is out:
Xiaomi Redmi 3/Pro ROM CR-Droid 7.1.2 V3.8.3 Official-Build 2017-11-25
Just flash with with any version of Open-Gapps 7.1 (ARM64) (I recommend to use "Pico") and Magisk.zip. Don't forget to install the app "Magisk-Manager"!
Credits go out to Bondstas (UA) for generating this ROM.
P.S.:
The thread will be updated from time to time if I notice, that a new version of CR-Droid is out.
Update-history:
15-08/2017: CR-Droid V3.7 from 15-08/2017 is out!
25-08/2017: CR-Droid V3.7 from 15-08/2017 with DT2W-kernel added!
11-10/2017: CR-Droid V3.7 from 09-10/2017 is out!
14-10/2017: CR-Droid V3.7 from 09-10/2017 with DT2W-kernel added!
18-11/2017: CR-Droid V3.8.2 from 01-11/2017 is out!
31-01/2018: CR-Droid V3.8.3 from 25-11/2017 released!
01-02/2017: CR-Droid V3.8.3 from 25-11/2017 with DT2W-kernel added!
Thanks a lot!
Another ROM for our Redmi3!
crDroid V3.7 from 15-08/2017 is released! - Download see 1st post!
Is this the same with bondstas build ?
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
No, I think it's the one from Winkarbik.
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
frankonia said:
No, I think it's the one from Winkarbik.
Click to expand...
Click to collapse
but, the rom size is the same
Ok, then you are probably right. I have it from 4PDA.
ABDZR_43 said:
but, the rom size is the same
Click to expand...
Click to collapse
The best way is by calculating md5 checksum of zips.
Sent from my Redmi Note 4 using XDA Labs
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
You must have a focaltech panel. https://forum.xda-developers.com/showpost.php?p=68344933&postcount=493
3.6 https://mega.nz/#!35AVQKRR!M5b72YaeK9vv0JMs0x-iZupP93KVKofP8095JJ3GL2A
3.7 https://mega.nz/#!vlpUAbCY!yWF15BcwyKVGB1X4TxF3bWoZPiXNRFbKIHWn6zNxNI4
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
I took a look in the "About"-menue: Under "Kernel-version" stands "3.10.107-lineageos.... winkarbik@ubuntusrv #1"
So this ROM is from WinKarbik.
double-post => deleted!
tripper22 said:
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
Click to expand...
Click to collapse
I inserted the DT2W-kernel to the main ROM-file. Download-link in the first post!
This ROM has problem with Xposed making phone unbootable.
I tried two other ROMs (Lineage and AICP) which don't have the problem.
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
JOLLYNERY said:
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
Click to expand...
Click to collapse
Excuse me in advance for going OT but before trying to install custom roms, have you tried to flash global version of MIUI that is bundled with most of world languages and can fit your needs: it has got working google play, not a single china app and is working fairly well in all parts. It can be easily flashed on locked bootloader as well using miflash tool, a windows 64 bit system and putting the phone in download mode.
You can find most of informations here http://en.miui.com/thread-228048-1-1.html
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
JOLLYNERY said:
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
Click to expand...
Click to collapse
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
ivanhoe1976 said:
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
Click to expand...
Click to collapse
lemme try it out bro, thanks alot.
JOLLYNERY said:
lemme try it out bro, thanks alot.
Click to expand...
Click to collapse
Guys it didn't work out for. I tried updating through updater but it didn't. Then through pc, it didn't respond. Says I am not allowed to update to any other ROM that is, not a STABLE.
I would b grateful if u assist.
Thanx
ivanhoe1976 said:
if you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in twrp (immediately after you flash twrp i mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: This will patch boot.img and you will have a "permanent" twrp that won't go away at first system restart. Now you can install supersu or any custom rom you want to try without any problem! Now, after much time on miui 8, i'm on los 14.1, but i've tried many other custom roms, each of one was stable and good for daily use except aex which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. Cr-droid is very good as well!
Click to expand...
Click to collapse
it didnt work out. It requested i can only update with stable rom. Because i tried updating with global dev rom . I might just trash this fone
Stolen from @insomnixXx: (Sorry buddy, I'm a bit lazy ) I AM NOT THE DEVELOPER OF THIS ROM NOR A MEMBER OF MOKEE TEAM!!!
The purpose of this thread is to "spread the word" for this ROM so many more users can try it and also that they know this option exists too.I am not responsible for any damage you may deal to your device since this is just an "repost" of the ROM.If you don't know what you are doing then better don't do it. Or just follow the instructions lol
For bug reports please contact the MoKee team because it is useless, since nearly all MoKee Dev's are chinese and active on MoKee forum
I will DON'T update the thread or write a personal feedback after every rom update. Their changelog is accessable for everyone, please feel free to read that .
About
MoKee Open Source is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
ALL CREDITS TO MOKEE TEAM
Instructions:
Do a nandroid backup via TWRP (link below) (safety first)
Wipe Dalvik, Cache, System, Data via TWRP
Install MoKee ROM and GApps
If you want root, install Magisk for example...
Reboot into system (first boot will take ~5 minutes!)
ENJOY
Downloads:
Download ROM: https://download.mokeedev.com/?device=zl1
Download GApps: https://opengapps.org
Download newest TWRP (important because of Vendor partition!): https://twrp.me/leeco/leecolepro3.html
Download Magisk: https://github.com/topjohnwu/Magisk/releases
Hit the thanks button if you like this post or comment if you don't. Any feedback is appreciated much .
Any experience?
drdagi said:
Any experience?
Click to expand...
Click to collapse
It's a very stable ROM but there is not extra functions like others rom.
May be in another version.
drdagi said:
Any experience?
Click to expand...
Click to collapse
Excellent battery life (drained only 4-5% while recover 102 apps via Titanium Backup, normal drain is 10% for me), but its like a Pixel ROM ( @Lethalben already said it);
There are no features, just a clean rom.
drdagi said:
Any experience?
Click to expand...
Click to collapse
很稳定。每天更新。在
faraway59651634 said:
很稳定。每天更新。在
Click to expand...
Click to collapse
Please write in english or use google translator
Excellent work
Everything works like a thousand wondersthe, battery seems to hold much more, My phone now is like it's from another planet much faster. My phone is: X722, Very important is to install twrp-3.2.3-1-zl1.img
or higher but no ( zl0 ), must be (zl1) .
IR included?
Sony make.belive said:
Please write in english or use google translator
Click to expand...
Click to collapse
ok
slawektj said:
Everything works like a thousand wondersthe, battery seems to hold much more, My phone now is like it's from another planet much faster. My phone is: X722, Very important is to install twrp-3.2.3-1-zl1.img
or higher but no ( zl0 ), must be (zl1) .
Click to expand...
Click to collapse
i have x722 i use twrp 3.2.3-1 zI0, without problems, i use zI1 ???
panos196 said:
i have x722 i use twrp 3.2.3-1 zI0, without problems, i use zI1 ???
Click to expand...
Click to collapse
For my X722 it worked me flash this TWRD (twrp-3.2.3-1-zl1.img) and I have not had any problems, but with this TWRD (twrp-3.2.3-1-zl0.img) I could not install the rom.
Awesome rom, smoother experience, greater battery experience.
Missing: IR remote app, play store IR apps support and need little more customization.
Thanks a million for this rom.
---------- Post added at 09:00 PM ---------- Previous post was at 08:55 PM ----------
TechDriver said:
IR included?
Click to expand...
Click to collapse
Not yet,
Did they include IR in the oreo version?
wilq5 said:
Did they include IR in the oreo version?
Click to expand...
Click to collapse
May be in future.
I have been using this rom since 5 days I didn't face any issue. Lock unlock is smooth without any issue.
Only need IR support and some additional features.
Great rom.
Any one know, for Incremental update which recovery need to be installed?
bppjenil said:
Any one know, for Incremental update which recovery need to be installed?
Click to expand...
Click to collapse
TWRP is necessary. But for incremental updates you need to donate a minimum of 5$ to them.
This is an one-and-only activation cost.
Otherwise you need to flash the whole rom for an update
Sony make.belive said:
TWRP is necessary. But for incremental updates you need to donate a minimum of 5$ to them.
This is an one-and-only activation cost.
Otherwise you need to flash the whole rom for an update
Click to expand...
Click to collapse
Thank you,
I paid and I'm on Incremental update, but aftrer install goes to recovery and doesn't reboot. Force to reboot but does not reboot.
But if i download full rom, after apply udate automatically reboot and works.
Any suggestions?
This rom doesn't give issues yet. Smooth.
Missing of IR remote.
bppjenil said:
Thank you,
I paid and I'm on Incremental update, but aftrer install goes to recovery and doesn't reboot. Force to reboot but does not reboot.
But if i download full rom, after apply udate automatically reboot and works.
Any suggestions?
This rom doesn't give issues yet. Smooth.
Missing of IR remote.
Click to expand...
Click to collapse
Maybe it wont work because its a nightly rom.. Please read the full description on their home page, what difference there are for editions
Great work but i have a few bugs:
- I use two sim card and when i setup data on second it keep reverting on first (after reboot or similar).
- On bank app when unlock with FP i get "Token is not unlocked"
This bugs was ok on old android 8 Mokee - phone is X722.
maybe someone knows why all on lineage based and aosp based roms that i install on ZL1 i have wrong battery information? i mean - it can show 20% and then i restart and it shows 70%, and then i restart again and it shows 30%.
it happens on all roms i tried of oreo and pie (lineage, mokee, RR, AEX), and only on zl1 (x720). when i install the same rom on zl0 (x722) i don't have this problem. when i install custom EUI rom i also don't have this problem, but then when i install lineage/mokee/RR again i have this problem again.
---------- Post added at 03:43 PM ---------- Previous post was at 03:16 PM ----------
maybe someone knows why all on lineage based and aosp based roms that i install on ZL1 i have wrong battery information? i mean - it can show 20% and then i restart and it shows 70%, and then i restart again and it shows 30%.
it happens on all roms i tried of oreo and pie (lineage, mokee, RR, AEX), and only on zl1 (x720). when i install the same rom on zl0 (x722) i don't have this problem. when i install custom EUI rom i also don't have this problem, but then when i install lineage/mokee/RR again i have this problem again.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Known working GSIs:
See here
Known issues on GSIs:
You tell me
Installation instructions:
See here
Join our Project Treble Telegram group for support: https://t.me/G5Treble
Report bugs here: https://github.com/montanadevelopment/Issue-Tracker
Always include logcats!
Downloads:
https://github.com/montanadevelopment/releases/releases/tag/LOS16M-1
Please leave a rating here: https://forum.xda-developers.com/devdb/project/?id=32858#reviews
Along with some constructive criticism
Changelogs:
Code:
2019-07-13:
Switched to Pixel fingerprint.
Force enabled navigation bar.
Fixed Moto Actions.
2019-06-28:
We now boot lots of more GSIs.
Fixed VoLTE.
2019-05-25:
Switched to BOARD_VNDK_VERSION=current.
2019-05-23:
Fixed some GSI-related bugs.
2019-05-22:
Initial release.
Special thanks to:
@vache for his hard work on Potter Treble, therootlord for his hard work on Sanders Treble.
@KalilDev, @AsD Monio, @GoldeneyeS2, @Steve Mathew Joy for their hard work on the montana device & vendor tree
@rajatgupta1998 for his work on the MSM8937 kernel
LineageOS team
All other open source devs/teams I may have missed!
Sources
Device Tree: https://github.com/montanadevelopment/android_device_motorola_montana/tree/lineage-16.0
Vendor: https://github.com/montanadevelopment/proprietary_vendor_motorola_montana/tree/lineage-16.0
Kernel: https://github.com/montanadevelopment/android_kernel_motorola_msm8937/tree/oreopie-treble
XDA:DevDB Information
GSI-friendly LineageOS 16 for Moto G5S, ROM for the Moto G5S
Contributors
JarlPenguin, AsD Monio
Source Code: https://github.com/montanadevelopment
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo
Based On: CyanogenMod/AOSP
Version Information
Status: Beta
Current Beta Version: 0.1
Beta Release Date: 2019-06-28
Created 2019-05-21
Last Updated 2019-07-29
Is it mandatory to format/wipe and do a clean install if I'm coming from regular LOS16?
shrmp said:
Is it mandatory to format/wipe and do a clean install if I'm coming from regular LOS16?
Click to expand...
Click to collapse
No, I don't think so, but don't blame me if anything goes wrong
E1001: Failed to update system image. Updater script ended with ERROR:7
Surely it's in alpha phase
newinnov said:
E1001: Failed to update system image. Updater script ended with ERROR:7
Surely it's in alpha phase
Click to expand...
Click to collapse
Redownload the zip and use the latest Treble TWRP. Most likely you have a corrupted zip or you're using the wrong TWRP. It flashed fine here.
which gsi can i use? arm64 a only or ab?
Aritmancia said:
which gsi can i use? arm64 a only or ab?
Click to expand...
Click to collapse
ARM64 A-only. If a GSI doesn't boot get logs, or else I cannot and will not help boot it. I also do not support Erfan's ported GSIs as of right now.
Hi,
Thanks for the pointer. It was corrupt download file. Re-download file is flashing fine.
But on boot it's asking for password. I have never set any boot time password. Anyway to fix that?
how i flash this rom, like a system image or just normal rom? and after, i need to flash GSI's roms like a system image or normal rom? Sorry i'm noob xD
Bug:
1. After boot msg displayed: There's an internal problem with your device. Contact manufacturer. ( Don't know if it's cosmetic or real)
2. VoLTE is dead in Treble implementation too.
---------- Post added at 03:05 PM ---------- Previous post was at 02:59 PM ----------
KniveAndPens said:
how i flash this rom, like a system image or just normal rom? and after, i need to flash GSI's roms like a system image or normal rom? Sorry i'm noob xD
Click to expand...
Click to collapse
Hi, Just like a normal rom. Later on you can switch to RR GSI - A if you want to but thats totally optional.
New build. If someone can test the ArrowOS GSI, I'd appreciate it.
Edit: It boots. I'm assuming AOSiP does as well.
newinnov said:
Hi,
Thanks for the pointer. It was corrupt download file. Re-download file is flashing fine.
But on boot it's asking for password. I have never set any boot time password. Anyway to fix that?
Click to expand...
Click to collapse
Format data again.
newinnov said:
Bug:
1. After boot msg displayed: There's an internal problem with your device. Contact manufacturer. ( Don't know if it's cosmetic or real)
2. VoLTE is dead in Treble implementation too.
---------- Post added at 03:05 PM ---------- Previous post was at 02:59 PM ----------
Hi, Just like a normal rom. Later on you can switch to RR GSI - A if you want to but thats totally optional.
Click to expand...
Click to collapse
Thanks for the bugs list. VoLTE is a known bug, same with the internal problem. See if the latest build fixes the internal error.
Mirrors have been updated. If you're coming from an older build than today's, please clean flash.
Hi, Bug is written as: VoLTE (doesn't persist over reboot).
But for me it never worked, even initially on a clean flash. It's completely offline since flash.
newinnov said:
Hi, Bug is written as: VoLTE (doesn't persist over reboot).
But for me it never worked, even initially on a clean flash. It's completely offline since flash.
Click to expand...
Click to collapse
Huh. I'll update that
After i installed Gsi (Resurrection Remix), i installed gapps and i was not paying much attention but i had seen an error message in twrp "error 20", then i try boot in system and my moto g5s was stuck 10 minutes in unlocked bootloader advise and not show any progress. After this, i reinstalled Lineage OS Project Treble when boot to system show an message like "enter your password" but i dont have this password, so i flashed stock rom in twrp and now everything its okay. Sorry bad english im just sharing my experience, i think i made a mistake.
Aritmancia said:
After i installed Gsi (Resurrection Remix), i installed gapps and i was not paying much attention but i had seen an error message in twrp "error 20", then i try boot in system and my moto g5s was stuck 10 minutes in unlocked bootloader advise and not show any progress. After this, i reinstalled Lineage OS Project Treble when boot to system show an message like "enter your password" but i dont have this password, so i flashed stock rom in twrp and now everything its okay. Sorry bad english im just sharing my experience, i think i made a mistake.
Click to expand...
Click to collapse
You must format data when the password prompt appears.
V2 released. Look at OP for changelog.
MIUI added to list of GSIs that boot.
Aritmancia said:
After i installed Gsi (Resurrection Remix), i installed gapps and i was not paying much attention but i had seen an error message in twrp "error 20", then i try boot in system and my moto g5s was stuck 10 minutes in unlocked bootloader advise and not show any progress. After this, i reinstalled Lineage OS Project Treble when boot to system show an message like "enter your password" but i dont have this password, so i flashed stock rom in twrp and now everything its okay. Sorry bad english im just sharing my experience, i think i made a mistake.
Click to expand...
Click to collapse
I also had this problem "error 20", i cant install gapps in gsi's, i tested nano and pico (arm64 9.0)
Resurrection Remix P
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is Resurrection Remix Pie based compiled using LineageOS sources from @YashGarg10 and @Harry8242. All the credits goes to these awesome developers. And of course, to the previous ones who have done every work on this device.
Current Status: Testing
What's Working/Not Working
My A6020a46 broke down completely a few months ago. I gave this ROM to my friend who has the exact same device so I wasn't able to test it completely.
I want you to report the bugs here. I will add them and try to fix them as soon as possible.
Not working
Camera
FM Radio
Sources
ROM: https://github.com/ResurrectionRemix
Device: https://github.com/wowufoundme/pie_device_lenovo_A6020
Kernel: https://github.com/wowufoundme/android_kernel_lenovo_msm8916
Vendor: https://github.com/wowufoundme/pie_vendor_lenovo_A6020
Downloads
TWRP 3.3.1.0 - A6020 (Flash in fastboot mode using fastboot flash recovery twrp-3.3.1-0-A6020.img)
Latest Build - AFH
OpenGApps
Installation (Clean Flah/If coming fro any other ROM)
1. Make sure you have the latest TWRP from Shreps (3.3.1.0).
2. Reboot into recovery mode
3. Select Wipe > Advanced Wipe
4. Tick mark Dalvik/ART Cache, Cache, System and Data
5. Swipe to wipe.
6. Select Install and select ROM zip
7. After flashing succeeds, wipe cache/dalvik cache, then Reboot system
8. After reboot completes, boot again into recovery and flash GApps package
9. Flash Magisk for root(optional) then reboot.
Installation (Dirty Flash)
1. Reboot into recovery mode
2. Select Install and select ROM zip
3. Flash TWRP zip but don't flash GApps.
4. After flashing succeeds, then Reboot system
Important Information
The ROM is currently under testing stage. I may not be able to provide changes very fast due to my placements but will try to release ASAP.
Screenshots
--See attachments--
Credits
Resurrection Remix Team
Lineage OS Team
YashGarg10, Harry8242, Shreps, scritch007 and all the awesome developers behind it.
Thanks for the rom ?
Why do we need to flash gapps after first boot? Can we flash with the rom?
hayalmalikanesi said:
Thanks for the rom ?
Why do we need to flash gapps after first boot? Can we flash with the rom?
Click to expand...
Click to collapse
You can! Just to be on a safe side. Let the ROM get into your phone.
sorry, but i cant find (latest TWRP from Shreps (3.3.1.0) ) could u provide a link for us?
thanks.
Leozaors said:
sorry, but i cant find (latest TWRP from Shreps (3.3.1.0) ) could u provide a link for us?
thanks.
Click to expand...
Click to collapse
--Updated in the OP--
hi so glad to finally see a different version of android pie.but fm radio does not work, but always 100.00 channel does not have a fixed voice, but even though I did not see a problem Start TV broadcasting may be problematic
bro, no link, update pls. wanna test very much
Camera dont work
raynofff said:
bro, no link, update pls. wanna test very much
Click to expand...
Click to collapse
Link not work!
raynofff said:
bro, no link, update pls. wanna test very much
Click to expand...
Click to collapse
--Link Updated--
hiltonjr.lucas said:
Link not work!
Click to expand...
Click to collapse
^^
bro, at first sight, rom is smooth, fast and may be (at first sight) one of the best 9 roms i tried, device A6020a40.
one thing: quick unlock when correct pin is entered- i can't find where to activate, bcoz fingerprint unlock is useless in this device, face unlock is useless 4 me. this are only bugs i mentioned until now... Please make keylock work correct, or tell how to change it. (sorry 4 my bad english, it is not my native).
Thnks 4 ur work, looking forward for new in future. big respect.
---------- Post added at 09:45 AM ---------- Previous post was at 09:43 AM ----------
raynofff said:
bro, at first sight, rom is smooth, fast and may be (at first sight) one of the best 9 roms i tried, device A6020a40.
one thing: quick unlock when correct pin is entered- i can't find where to activate, bcoz fingerprint unlock is useless in this device, face unlock is useless 4 me. this are only bugs i mentioned until now... Please make keylock work correct, or tell how to change it. (sorry 4 my bad english, it is not my native).
Thnks 4 ur work, looking forward for new in future. big respect.
Click to expand...
Click to collapse
sorry, i forget- camera and sound - ewerything works good
are this smooth for gaming?
muhtarialdi said:
are this smooth for gaming?
Click to expand...
Click to collapse
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
shubhkirtisharma said:
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
Click to expand...
Click to collapse
i use mokee rom 7.1.2 now in my lenovo vibe k5. it was very smooth for gaming better than the other rom (include 8.1 and 9.0).
my question is, are this rom better than the other rom oreo and pie?
thank you
shubhkirtisharma said:
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
Click to expand...
Click to collapse
Yes k5 plus isn't that much good but game like pubg u can play it smooth on some roms and lag on other
muhtarialdi said:
i use mokee rom 7.1.2 now in my lenovo vibe k5. it was very smooth for gaming better than the other rom (include 8.1 and 9.0).
my question is, are this rom better than the other rom oreo and pie?
thank you
Click to expand...
Click to collapse
try it and tell us
Thank you for this Rom, everything is working fine i havent found bugs yet except that the battery drains a little fast
shubhkirtisharma said:
--Link Updated--
Click to expand...
Click to collapse
Thanks for providing new Pie Rom for Lenovo A6020. Rom is fine and smooth. Since you are taking care of many wonderful Roms, I just want to know (Request), whether we can expect Pixel Experience Pie Rom for Lenovo A6020. Thank you once again for the efforts and support for this device.
youkrish said:
Thanks for providing new Pie Rom for Lenovo A6020. Rom is fine and smooth. Since you are taking care of many wonderful Roms, I just want to know (Request), whether we can expect Pixel Experience Pie Rom for Lenovo A6020. Thank you once again for the efforts and support for this device.
Click to expand...
Click to collapse
Pixel Experience Alpha build is there for A6020.